4
Biosolve E Multipurpose Heavy-Duty Cleaner For Aquaculture Production CAUSTIC-BASED CONCENTRATED FORMULATION WITH EXCELLENT CLEANING AND DEGREASING PROPERTIES. FOR CLEANING PE LINING AND CONCRETE SHRIMP POND SURFACES AND EQUIPMENT. CAN BE USED WITH HARD WATER. COMPATIBLE WITH ANY WATER SALINITY.

Biosolve E - freshbydesign.com.au

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Biosolve E - freshbydesign.com.au

Biosolve™

EMultipurpose Heavy-Duty CleanerFor Aquaculture Production

CAUSTIC-BASED CONCENTRATED FORMULATION WITH EXCELLENT CLEANING ANDDEGREASING PROPERTIES. FOR CLEANING PE LINING AND CONCRETE SHRIMP POND SURFACES AND EQUIPMENT. CAN BE USED WITH HARD WATER. COMPATIBLE WITH ANY WATER SALINITY.

Page 2: Biosolve E - freshbydesign.com.au

Washing with water alone reduces contamination by up-to 60%, but using a heavy-duty detergent decreases the original burden by 99%. Therefore, thorough washing of all surfaces and equipment with an effective heavy-duty detergent is essential to achieve the best results from any subsequent disinfection procedure.

Engineered to Complement Virkon™ AQUATIC broad spectrum disinfectant

Biosolve™ E has been specifically engineered to ensure that its formulation does not interfere with Virkon™ AQUATIC’s subsequent broad spectrum activity following the detergent washing stage of a shrimp production biosecurity program.

Cleaning Power Backed By Science

Biosolve™ E is a highly alkaline blend of non-ionic and amphoteric surfactants in an aqueous solution incorporating a sequestrant for superior hard water performance.

Biosolve™ E has been formulated using actives which have been carefully selected for their environmental profile, and complies with the biodegradability requirements laid down by the European regulation on detergents (648/2004/EC).

Why Use Biosolve™ E

Throughout the course of the shrimp production cycle, biological and other waste materials will accumulate on the pond liner, other surfaces and equipment. This accumulation of waste can lead to the generation of biofilm, a protective organic matter that can harbour

For a shrimp production biosecurity program to work to its full potential it is necessary to comprehensively clean before disinfecting.

Biosolve™

EMultipurpose Heavy-Duty CleanerFor Aquaculture Production

disease-causing organisms such as viruses, bacteria, fungi and protozoa1.

By its nature, the physical structure of a biofilm is complex, making it hard to remove from surfaces using just water, caustic soda or standard detergents.

What is the difference between Biosolve™ E vs. standard detergents and Caustic Soda?

Unlike household detergents or standard caustic soda, Biosolve™ E is a modern formulated heavy-duty cleaner made from carefully selected non-ionic and amphoteric detergents, combined with a high concentration of caustic soda.

The powerful alkaline formulation of Biosolve™ E has been specifically developed to quickly clean, degrease and remove biofilm from the surfaces of PL tanks, shrimp pond liners (PE & Concrete), aeriation paddles, boats, and other equipment used on and around a shrimp production facility.

For ease of preparation, Biosolve™ E solutions can be made using either fresh or saltwater.

Improved Rinsing Capabilities

Biosolve™ E is suitable to be either foamed or sprayed onto surfaces and equipment with its optimised formulation offering the user improved rinsing capabilities over other detergent formulations. This ultimately means less water used, and time taken to carry out the washing stage of a shrimp production cleaning and disinfection biosecurity program.

Page 3: Biosolve E - freshbydesign.com.au

Storage

Store in a cool dry place away from other products.

Do not allow contact with acids.

Disposal

Dilute small quantities to waste water, via a foul sewer or other treatment facility in accordance with local water authority regulations.

Instructions for Use

STEP 1 STEP 2Stir thoroughly until fully dissolved, then use

Stir thoroughly until fully dissolved, then use

Pour 1000 litres water. Add Biosolve™ E 10 litres per 1000 litres = 1:100 (1%)

STEP 1Pour 1000 litres water. Add Biosolve™ E 10 litres per 1000 litres = 1:100 (1%)

Presoak surface with water

STEP 3Remove stubborn soiling through scrubbing and then rinse all surfaces with clean water

Spray surface and leave solution for at least 24 hours

STEP 4

STEP 3STEP 2 STEP 4 STEP 5Remove stubborn soiling through scrubbing and then rinse all surfaces with clean water

Spray surface and leave solution for at least 20-30 mins

PE Lining

Concrete pond

Ensure that site specific personal protective equipment is worn

Shelf Life

Concentrate 3 years. Diluted product up to one week if unused.

Packaging

Available in 5 litre cartons and 20 litre drums approved to UN Standards.

1 Hobley, L., C. Harkins, C.E. Macphee and N.R. Stanley-Wall. 2015. Giving structure to the biofilm matrix: an overview of individual strategies and emerging common themes. FEMS Microbiology Reviews. 39(5): 649 - 669

Page 4: Biosolve E - freshbydesign.com.au

Antec International LimitedLANXESS Material Protection ProductsWindham Road, Chilton Industrial Estate, Sudbury, Suffolk, CO10 2XDUnited Kingdom

Tel. +44 (0)1787 [email protected]

Distributed by:

©2020 LANXESS. Biosolve™, LANXESS™ and the LANXESS Logo are trademarks of LANXESS Deutschland GmbH or its affiliates. All trademarks are registered in many countries worldwide.

LANXESS/BiosolveTME/18.11.20/V5