6
SPECIFICATIONS - A01 - PIXEL SIDE SI Printed For more information, please download the BL LIGHTING catalogue BL LIGHTING. ILLUMINATE EVERYTHING 111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 E: [email protected] Copyright © BL INNOVATIVE LIGHTING. All Rights Reserved. PROJECT CLIENT TYPE Solid State Lighting is sensitive to power fluctuations Surge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failure Lack of surge protection may void your warranty bllighting.com BL neonVIEW Diffused, Flexible, Linear LED Lighting, Side Emitting, 24VDC, Constant Voltage Side Light, Silicone, Chase Electrical Control Input Voltage Max Input Current Connections Operating Temperature Circuit IC (Chase) 24VDC 4.12A (White) 18AWG, Copper Conductors -40°F to 131°F (-40°C to 55°C) Class 2 Injection Moulded White Silicone 3-9/32” (83.3mm) 14’-6” (4.4m) - RGB 150mm (5-7/8") IP68(Seamless Injection) Clip, Track Mechanical Housing Construction Cutting Increments Maximum Run Length Medial Bend Radius Environmental Mounting Accessories NVSTK NVSJC NVSCP NVSMCH NVSRMC NVSRMCH Factory installed termination kit Factory installed jumper cable Surface Mounting Clip Surface Mounting Channel Recessed Mounting Clip Recessed Mounting Channel Lighting Lamp LED’s Per Foot Power Beam Angle Average Life Lumens Efficacy LED, SMD 5050 25 LEDs/ft (84 LEDs/m) 5.00-6.70 W/FT 120° 50,000 Hours 171-213 lm/FT 29-34 lm/W RGB27K RGB30K RGB40K RGB * * * * Multiple Lead Orientation options available * Please refer to the performance table on the following page ** ** Certification LOW IP68 IC

BL neonVIEW PIXEL SIDE SI Specification 2...NVSCP NVSMCH NVSRMC NVSRMCH Factory installed termination kit Factory installed jumper cable Surface Mounting Clip Surface Mounting Channel

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

  • SPECIFICATIONS - A01 -

    PIXEL SIDE SI Printed

    For more information, please download the BL LIGHTING catalogue

    BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 E: [email protected] Copyright © BL INNOVATIVE LIGHTING. All Rights Reserved.

    PROJECT CLIENT TYPE

    Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty

    bllighting.com

    BL neonVIEWDiffused, Flexible, Linear LED Lighting, Side Emitting, 24VDC, Constant Voltage

    Side Light, Silicone, Chase

    ElectricalControlInput VoltageMax Input CurrentConnectionsOperating TemperatureCircuit

    IC (Chase)24VDC4.12A (White)18AWG, Copper Conductors-40°F to 131°F (-40°C to 55°C)Class 2

    Injection Moulded White Silicone3-9/32” (83.3mm)14’-6” (4.4m) - RGB150mm (5-7/8")IP68(Seamless Injection)Clip, Track

    MechanicalHousing ConstructionCutting IncrementsMaximum Run LengthMedial Bend RadiusEnvironmentalMounting

    AccessoriesNVSTKNVSJCNVSCPNVSMCHNVSRMCNVSRMCH

    Factory installed termination kitFactory installed jumper cableSurface Mounting ClipSurface Mounting ChannelRecessed Mounting ClipRecessed Mounting Channel

    Lighting

    LampLED’s Per FootPowerBeam AngleAverage LifeLumensEfficacy

    LED, SMD 505025 LEDs/ft (84 LEDs/m)5.00-6.70 W/FT 120°50,000 Hours171-213 lm/FT 29-34 lm/W

    RGB27K RGB30K RGB40KRGB

    *

    *

    **

    Multiple Lead Orientation options available

    * Please refer to the performance table on the following page

    **

    **

    Certification

    LOWIP68 IC

  • PIXEL SIDE SIBL neonVIEWSide Light, Silicone, Chase

    SPECIFICATIONS - A02 -

    Printed

    For more information, please download the BL LIGHTING catalogue

    BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 E: [email protected] Copyright © BL INNOVATIVE LIGHTING. All Rights Reserved.

    PROJECT CLIENT TYPE

    Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty

    bllighting.com

    Diffused, Flexible, Linear LED Lighting, Side Emitting, 24VDC, Constant Voltage

    14141414

    ftftftft

    6666

    inininin

    RGBRGB27KRGB30KRGB40K

    CCT/Color

    5.006.706.706.70

    W/FTW/FTW/FTW/FT

    Load

    lm/FTlm/FTlm/FTlm/FT

    171196198213

    Lumens

    34292932

    lm/Wlm/Wlm/Wlm/W

    Efficacy Max. Length

    3-9/323-9/323-9/323-9/32

    inininin

    Cutting Increments

    (83.3mm)(83.3mm)(83.3mm)(83.3mm)

    Ordering

    BL neonVIEW PIXEL SIDE SI

    Product Name CCT/Color

    M1M2M3M4

    RGBRGB27KRGB30KRGB40K

    ====

    Performance

    Lead Orientation

    NVSTKBC NVSTKECNVSTKRSCNVSTKLSC

    ====

    Back LeadEnd LeadRight Side LeadLeft Side Lead

    Mounting Accessories

    NVSCPNVSMCHNVSRMCNVSRMCH

    ====

    Mounting ClipMounting ChannelRecessed Mounting ClipRecessed Mounting Channel

  • PIXEL SIDE SIBL neonVIEW

    Lead Orientation

    End LeadPart# NVSTK68SMEC

    Light surface

    Back LeadPart# NVSTK68SMBC

    Right Side LeadPart# NVSTK68SMRSC

    Left Side LeadPart# NVSTK68SMLSC

    Cutting Increments3-9/32” (83.3mm)

    Light surface

    BL neonVIEW SIDE Series bends vertically*Horizontally bend option available on BL neonVIEW DOME and FLAT Series

    **Light surface could be inside or outside.

    Minimum bend radius150mm (5-7/8")

    **Light surface

    Minimum Bend Radius and Bend Orientations

    *

    *

    Side Light, Silicone, Chase

    SPECIFICATIONS - A03 -

    Printed

    For more information, please download the BL LIGHTING catalogue

    BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 E: [email protected] Copyright © BL INNOVATIVE LIGHTING. All Rights Reserved.

    PROJECT CLIENT TYPE

    Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty

    bllighting.com

    Diffused, Flexible, Linear LED Lighting, Side Emitting, 24VDC, Constant Voltage

  • PIXEL SIDE SIBL neonVIEW

    Dimensions

    Right Side LeadPart# NVSTK68SMRSC

    Left Side LeadPart# NVSTK68SMLSC

    End LeadPart# NVSTK68SMEC

    Back LeadPart# NVSTK68SMBC

    16[0.63”]

    17[0.67”]

    17[0.67”]

    2[0.08”]

    2[0.08”]

    2[0.08”]

    30[1.18”] 14

    [0.55”]

    16[0.63”]

    17[0.67”]

    16[0.63”]

    17[0.67”]

    17[0.67”]

    17[0.67”]

    16[0.63”]

    17[0.67”]

    5[0.20”]

    11[0.43”]

    11[0.43”]

    18[0.7”] 18

    [0.7”]

    End Cap

    17[0.67”]

    2[0.08”]

    16[0.63”]

    16[0.63”]

    17[0.67”]

    11[0.43”]

    For more detail, please download the CAD Drawing

    The tolerance of the Lead is ±0.5mm

    Side Light, Silicone, Chase

    SPECIFICATIONS - A04 -

    Printed

    For more information, please download the BL LIGHTING catalogue

    BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 E: [email protected] Copyright © BL INNOVATIVE LIGHTING. All Rights Reserved.

    PROJECT CLIENT TYPE

    Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty

    bllighting.com

    Diffused, Flexible, Linear LED Lighting, Side Emitting, 24VDC, Constant Voltage

  • For more detail, please download the CAD Drawing

    Accessories (Surface Mounting Clip and Channel)

    Surface Mounting Clip Part# NVSCP

    Surface Mounting ChannelPart# NVSMCH

    35[1.38”]

    18.0[0.71”]

    19[0.75”]

    Ø 3.5 [0.14”]

    18.0[0.71”]

    19[0.75”]

    Ø 3.5 [0.14”]

    200 x 5[7.87”] x 5

    50[1.97”]

    1000[39.37”]

    PIXEL SIDE SIBL neonVIEWSide Light, Silicone, Chase

    SPECIFICATIONS - A05 -

    Printed

    For more information, please download the BL LIGHTING catalogue

    BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 E: [email protected] Copyright © BL INNOVATIVE LIGHTING. All Rights Reserved.

    PROJECT CLIENT TYPE

    Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty

    bllighting.com

    Diffused, Flexible, Linear LED Lighting, Side Emitting, 24VDC, Constant Voltage

  • Accessories (Recessed Mounting Clip and Channel)

    Recessed Mounting Clip Part# NVSRMC

    Recessed Mounting ChannelPart# NVSRMCH

    For more detail, please download the CAD Drawing

    22[0.87”]

    21[0.83”]

    27.5[1.08”]

    35[1.38”]

    Ø 4.2 [0.17”]

    200 x 5[7.87”] x 5

    50[1.97”]

    22[0.87”]

    21[0.83”]

    27.5[1.08”]

    1000[39.37”]

    Ø 4.2 [0.17”]

    PIXEL SIDE SIBL neonVIEWSide Light, Silicone, Chase

    SPECIFICATIONS - A06 -

    Printed

    For more information, please download the BL LIGHTING catalogue

    BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 E: [email protected] Copyright © BL INNOVATIVE LIGHTING. All Rights Reserved.

    PROJECT CLIENT TYPE

    Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty

    bllighting.com

    Diffused, Flexible, Linear LED Lighting, Side Emitting, 24VDC, Constant Voltage

    PROJECT: CLIENT: Printed: Sep.17.2020TYPE: CCT/Color: [M1]IP: [NVSTKBC]MA: [NVSMCH]