6
Diffused, Flexible, Linear LED Lighting, 24VDC, Constant Voltage SPECIFICATIONS - A01 - BL neonVIEW Printed For more information, please download the BL LIGHTING catalogue BL LIGHTING. ILLUMINATE EVERYTHING 111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 E: [email protected] Copyright © BL INNOVATIVE LIGHTING. All Rights Reserved. PROJECT CLIENT TYPE Solid State Lighting is sensitive to power fluctuations Surge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failure Lack of surge protection may void your warranty bllighting.com Lighting Electrical Control Input Voltage Max Input Current Connections Operating Temperature Circuit DMX, Bluetooth 24VDC 4.12A (White) 18AWG, Copper Conductors -40°F to 131°F (-40°C to 55°C) Class 2 Injection Moulded White Silicone 3-9/32” (83.3mm) 25FT (7.9m) 150mm (5-7/8") IP68(Seamless Injection) Clip, Track Mechanical Housing Construction Cutting Increments Maximum Run Length Medial Bend Radius Environmental Mounting Accessories NVSTK NVSJC NVSCP NVSMCH NVSRMC NVSRMCH Factory installed termination kit Factory installed jumper cable Surface Mounting Clip Surface Mounting Channel Recessed Mounting Clip Recessed Mounting Channel Lamp Load Beam Angle Average Life Lumens Efficacy 43 LEDs/ft (144 LEDs/m) 3.66 W/FT 120° 50,000 Hours 175 lm/FT 48 lm/W * * 22K57K ** TUNABLE SIDE SI Tunable White, Side Profile, Silicone Multiple Lead Orientation options available * Please refer to the performance table on the following page ** Bluetooth Certification DMX LOW IP68

BL neonVIEW TUNABLE SIDE SI Specification 2...NVSCP NVSMCH NVSRMC NVSRMCH Factory installed termination kit Factory installed jumper cable Surface Mounting Clip Surface Mounting Channel

  • Upload
    others

  • View
    4

  • Download
    0

Embed Size (px)

Citation preview

  • Diffused, Flexible, Linear LED Lighting, 24VDC, Constant Voltage

    SPECIFICATIONS - A01 -

    BL neonVIEW Printed

    For more information, please download the BL LIGHTING catalogue

    BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 E: [email protected] Copyright © BL INNOVATIVE LIGHTING. All Rights Reserved.

    PROJECT CLIENT TYPE

    Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty

    bllighting.com

    Lighting

    ElectricalControlInput VoltageMax Input CurrentConnectionsOperating TemperatureCircuit

    DMX, Bluetooth24VDC4.12A (White)18AWG, Copper Conductors-40°F to 131°F (-40°C to 55°C)Class 2

    Injection Moulded White Silicone3-9/32” (83.3mm) 25FT (7.9m) 150mm (5-7/8")IP68(Seamless Injection)Clip, Track

    MechanicalHousing ConstructionCutting IncrementsMaximum Run LengthMedial Bend RadiusEnvironmentalMounting

    AccessoriesNVSTKNVSJCNVSCPNVSMCHNVSRMCNVSRMCH

    Factory installed termination kitFactory installed jumper cableSurface Mounting ClipSurface Mounting ChannelRecessed Mounting ClipRecessed Mounting Channel

    LampLoadBeam AngleAverage LifeLumensEfficacy

    43 LEDs/ft (144 LEDs/m)3.66 W/FT 120°50,000 Hours175 lm/FT 48 lm/W

    **

    22K57K

    **

    TUNABLE SIDE SI Tunable White, Side Profile, Silicone

    Multiple Lead Orientation options available

    * Please refer to the performance table on the following page

    **

    Bluetooth

    Certification

    DMX LOWIP68

  • Diffused, Flexible, Linear LED Lighting, 24VDC, Constant Voltage

    BL neonVIEW

    SPECIFICATIONS - A02 -

    Printed

    For more information, please download the BL LIGHTING catalogue

    BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 E: [email protected] Copyright © BL INNOVATIVE LIGHTING. All Rights Reserved.

    PROJECT CLIENT TYPE

    Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty

    bllighting.com

    25 ft 11 in

    2200 (WW)5700 (W)

    WW + W

    CCT/Color

    3.66 W/FT

    Load

    lm/FTlm/FTlm/FT

    8199175

    Lumens

    465548

    lm/Wlm/Wlm/W

    Efficacy Max. Length

    3-9/32 in

    Cutting Increments

    Performance

    Ordering

    BL neonVIEW TUNABLE SIDE SI

    Product Name

    (83.3mm)

    TUNABLE SIDE SI Tunable White, Side Profile, Silicone

    CCT/Color

    TW 2200 - 5700=

    TW

    Lead Orientation

    NVSTKBC NVSTKECNVSTKRSCNVSTKLSC

    ====

    Back LeadEnd LeadRight Side LeadLeft Side Lead

    Mounting Accessories

    NVSCPNVSMCHNVSRMCNVSRMCH

    ====

    Mounting ClipMounting ChannelRecessed Mounting ClipRecessed Mounting Channel

  • TUNABLE SIDE SI Tunable White, Side Profile, SiliconeDiffused, Flexible, Linear LED Lighting, 24VDC,

    Constant Voltage

    BL neonVIEW

    SPECIFICATIONS - A03 -

    Printed

    Lead Orientation

    End LeadPart# NVSTK68SMEC

    Light surface

    Back LeadPart# NVSTK68SMBC

    Right Side LeadPart# NVSTK68SMRSC

    Left Side LeadPart# NVSTK68SMLSC

    Cutting Increments3-9/32” (83.3mm)

    Light surface

    BL neonVIEW SIDE Series bends vertically*Horizontally bend option available on BL neonVIEW DOME and FLAT Series

    **Light surface could be inside or outside.

    Minimum bend radius150mm (5-7/8”)

    **Light surface

    Minimum Bend Radius and Bend Orientations

    *

    *

    For more information, please download the BL LIGHTING catalogue

    BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 E: [email protected] Copyright © BL INNOVATIVE LIGHTING. All Rights Reserved.

    PROJECT CLIENT TYPE

    Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty

    bllighting.com

  • TUNABLE SIDE SI Tunable White, Side Profile, SiliconeDiffused, Flexible, Linear LED Lighting, 24VDC,

    Constant Voltage

    BL neonVIEW

    SPECIFICATIONS - A04 -

    Printed

    Dimensions

    Right Side LeadPart# NVSTK68SMRSC

    Left Side LeadPart# NVSTK68SMLSC

    End LeadPart# NVSTK68SMEC

    Back LeadPart# NVSTK68SMBC

    16[0.63”]

    17[0.67”]

    17[0.67”]

    2[0.08”]

    2[0.08”]

    2[0.08”]

    30[1.18”] 14

    [0.55”]

    16[0.63”]

    17[0.67”]

    16[0.63”]

    17[0.67”]

    17[0.67”]

    17[0.67”]

    16[0.63”]

    17[0.67”]

    5[0.20”]

    11[0.43”]

    11[0.43”]

    18[0.7”] 18

    [0.7”]

    End Cap

    17[0.67”]

    2[0.08”]

    16[0.63”]

    16[0.63”]

    17[0.67”]

    11[0.43”]

    For more detail, please download the CAD Drawing

    The tolerance of the Lead is ±0.5mm

    For more information, please download the BL LIGHTING catalogue

    BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 E: [email protected] Copyright © BL INNOVATIVE LIGHTING. All Rights Reserved.

    PROJECT CLIENT TYPE

    Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty

    bllighting.com

  • TUNABLE SIDE SI Tunable White, Side Profile, SiliconeDiffused, Flexible, Linear LED Lighting, 24VDC,

    Constant Voltage

    BL neonVIEW

    SPECIFICATIONS - A05 -

    Printed

    For more detail, please download the CAD Drawing

    Accessories (Surface Mounting Clip and Channel)

    Surface Mounting Clip Part# NVSCP

    Surface Mounting ChannelPart# NVSMCH

    35[1.38”]

    18.0[0.71”]

    19[0.75”]

    Ø 3.5 [0.14”]

    18.0[0.71”]

    19[0.75”]

    Ø 3.5 [0.14”]

    200 x 5[7.87”] x 5

    50[1.97”]

    1000[39.37”]

    For more information, please download the BL LIGHTING catalogue

    BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 E: [email protected] Copyright © BL INNOVATIVE LIGHTING. All Rights Reserved.

    PROJECT CLIENT TYPE

    Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty

    bllighting.com

  • TUNABLE SIDE SI Tunable White, Side Profile, SiliconeDiffused, Flexible, Linear LED Lighting, 24VDC,

    Constant Voltage

    BL neonVIEW

    SPECIFICATIONS - A06 -

    Printed

    Accessories (Recessed Mounting Clip and Channel)

    Recessed Mounting Clip Part# NVSRMC

    Recessed Mounting ChannelPart# NVSRMCH

    For more detail, please download the CAD Drawing

    22[0.87”]

    21[0.83”]

    27.5[1.08”]

    35[1.38”]

    Ø 4.2 [0.17”]

    200 x 5[7.87”] x 5

    50[1.97”]

    22[0.87”]

    21[0.83”]

    27.5[1.08”]

    1000[39.37”]

    Ø 4.2 [0.17”]

    For more information, please download the BL LIGHTING catalogue

    BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 E: [email protected] Copyright © BL INNOVATIVE LIGHTING. All Rights Reserved.

    PROJECT CLIENT TYPE

    Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty

    bllighting.com

    PROJECT: CLIENT: Printed: Sep.17.2020TYPE: CCT/Color: [NVSTKBC]IP: [NVSMCH]