Upload
nguyenkhanh
View
235
Download
0
Embed Size (px)
Citation preview
Black and Decker PS1800 Case ReplacementThis guide will illustrate how to open the outer case of the Black and Decker PS1800.
Written By: Christian Aldrich
Black and Decker PS1800 Case Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 4
INTRODUCTION
This guide will illustrate how to open the outer case of the Black and Decker PS1800.
TOOLS:Phillips #00 Screwdriver (1)
Black and Decker PS1800 Case Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 4
Step 1 — Case
Flip device over so that the screw holes face up.
Use the Phillips #00 screwdriver to remove all six 18mm Phillips screws.
Use the Phillips #00 screwdriver to remove the single 12mm Philips screw.
Step 2
Remove one side of the Clamshell.
Black and Decker PS1800 Case Replacement
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 4