Upload
kevin-mueller
View
213
Download
0
Embed Size (px)
Citation preview
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 1/167
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 2/167
INTRODUCTION
We would like to present the 6th edition of the Black Max Operations Handbook. We
hope you will find it concise, easy to read, and to use.Drilling technology is moving at a rapid pace today, both in and out of the field. Newtechniques are developed everyday and can be difficult to keep up with. With this inmind, we set out to gather information and procedures that are commonly used inthe field today, with respect to the operation of the Black Max products.This book is being made with a two-fold purpose:
a) Bridge the gap between users in order to provide greater understanding andcommunication.
b) Provide the drilling operator and rig hands information they will need to ensureproper operation of Black Max products in order to achieve maximum performance.
The manual covers basic procedures and instructions used in the proper operationof Black Max products. This information is provided as a guideline only and must be
used with the necessary precautions. If there is any question as to the correct andsafe use of these products, please contact your nearest Black Max representative.
If you think there is anything that we missed (procedures, formulas, diagrams, etc.)that would help you to run our products in a more efficient manner, contact us at our head office - (780) 955-8828, and we will do our best to incorporate the informationinto the next edition.
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 3/167
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 4/167
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 5/167
WINDOW MILLINGProcedures 132Whipstock Specifications 134Mills 135
FISHINGCanFish Services 136
TABLESMotor Shipping Information 117
Casing Dimensions 149Rotary Connection Cross Reference 151Drill Collar Weights 152
Annular Capacities 153Hole Capacity 154Drill Pipe Capacities 155Drill Pipe Properties 156
Nozzle Flow Areas 157Mud Weights 159Unit Conversions 160
INDEX Previous
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 6/167
DESCRIPTION
Bearing Assembly - Each Black Max motor comes equipped with a fully sealed, oillubricated bearing system. Bearings are stacked to accommodate high speed/lowtorque or low speed/high torque, without altering radial or axial loading.
Universal Joint Assembly - The Black Max universal joint is used to convert theeccentric motion of the motor (rotor) to a smooth concentric motion required by thebearing section. The simple design of two internally sealed ball bearing style
universal joints and a connecting rod, allows the motor to operate at high angles, yetstill be able to handle high torque and speed.
Adjustable Bent Housing/Fixed Housing - The Black Max line of adjustable
housings are available in 0°-3° settings, and also includes a specialized assemblyfor short radius drilling. The housing is easily adjustable and allows the operator to
reset angles at the rig floor, eliminating the need to change assemblies or motors. Always follow the specifications for proper tightening of the assembly. (See pg. 138-139 for proper procedures)
Black Max also supplies a number of fixed housings in angles from 0° to 4°(depending on the motor size and application). See your Black Max representativefor details.
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 7/167
Power Section - Black Max power sections are made up of a lobed rotor that fitsinside a rubber lined housing (stator). The rotor has one less lobe than the stator,creating a continuously sealing chamber. Drilling mud or air is forced through themotor, thereby turning the rotor and generating torque. The lower the speed (largenumber of lobes), the more torque is provided, and vice versa.
Where drilling requirements call for circulation rates exceeding maximumrecommended rates, rotors are jetted or bored to allow excessive fluid to flow downa parallel path, thereby reducing damage to the elastomer in the stator.
Dump Valve - optional (see your dealer for more details)
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 8/167
PROCEDURES
This section describes basic operating procedures, which are used in the field andwill facilitate proper operation of Black Max motors.
An important aspect of any planned downhole motor run is properly matching the bitand hydraulics to the motor in order to achieve the desired results. Attention mustbe given to TFA (total flow area) to see that proper parameters are maintained withregard to pressure drop across bit, annular velocity needed for hole cleaning,
maximum standpipe pressure, and adequate hole cleaning at the bit\formationinterface. Keep in mind that stall pressure of a motor may approach pump relief valve limits in some cases. In larger hole sizes, a bored rotor may be necessary toaccommodate fluid requirements mentioned above. Generally, all motor sizes haveadequate torque to run any cone type bit. If a drag type (PDC or polycrystallinediamond compact) bit is to be used, it should be remembered that the moreaggressive PDC's may cause excessive stalling in rough, broken formations. If thepurpose of the run is to build angle or otherwise achieve significant deviation, gaugelength on the bit is very important. Gauge protection is necessary if the motor isbent, since continual side loading occurs at the bit.
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 9/167
Surface Testing (& Orientation)
The Black Max motor is a sealed bearing motor, so it may be safely surface testedwith or without a bit attached, since bit pressure drop is not necessary to cool the
bearings. It is recommended that a bit not be attached if the motor is significantlybent, and needs to be positioned in the BOP's (blow-out preventers) or below toaccommodate testing of the dump valve. If the downhole motor is tested in thismanner, be sure to remove the bit box thread protector before lowering the motor into the hole. When the downhole motor is equipped with a dump valve, attach thekelly and lower the ports just below the top of the bell nipple before starting thepump. Carefully observe the closing of the dump valve as the pump is eased up.
After the valve is closed, ease up on the pump. Left-hand torque should be noted inthe assembly. Quite a bit of vibration may be seen as flow rates increase, but isnormal and no cause for concern. Before shutting the pump down, be sure that thedump valve is in position in the bell nipple. When the pump is shut down, if thepressure doesn't bleed off, open the fill-up line on the standpipe to relieve thepressure. When turning the bit box with tongs during the course of a coiled tubingoperation, turn the box to the left, otherwise a twist-off could occur.
Pick the motor up, and attach the chosen bit. If a bent housing adjustment isneeded, lower the motor down to the adjustable, and make the needed changeaccording to the accompanying setting procedure (see pg. 138-140). Uponcompletion of the setting procedure, mark the tool face, and slowly lower the motor into the
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 10/167
hole, keeping tool face alignment as you go. At this point, you can align and testwhatever steering device is to be used, and proceed on in the hole. Please note,motors are pre-tested in water and should be properly thawed before surface testing,when operating in sub-zero temperatures.
Running In
We recommend running a float valve with the downhole motor, especially if a dumpvalve assembly is employed. This keeps trash out of the ID of the string. If no dumpvalve is used, it (the float) will keep the motor from running backward as the pipe fillsup. When this occurs; it is possible to back something off internally. If heat is afactor, it is a good idea to break circulation (depending on hole depth) once or twice
as you approach bottom. Pumping should be at a slow rate and kept up longenough (calculate surface-to-bit strokes) to move some cool mud down to the motor.Slow movement of the drill string up and down during the pumping operation willkeep casing wear to a minimum, and decrease the likelihood of leaving a ledge if themotor happens to be in open hole. If the motor bend is extreme, keep runningspeeds slow to minimize the chance of ledging. Running speeds should also beslow when dealing with high mud weights and small liners, as pressure surges mightknock the bottom out at the liner shoe.
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 11/167
Drilling
Drilling with a downhole motor is monitored mainly by changes in standpipepressure. Generally, the amount of torque created at the bit face will be reflected byan increase in standpipe pressure over the "off bottom" reading. This is Differential
Pressure. Keep in mind that the maximum motor differential presented in thedownhole motor specifications is the total differential recommended. It takes from 10to 15% of that total to turn the rotor in the off bottom position. The difference is theamount that is usable with WOB (weight-on-bit).
When tagging bottom for the first time, keep in mind that a new bottom patternneeds to be established, especially if a different assembly or a different bend is
employed. Higher differential pressures will be noted with less bit weight if PDC(drag) bits are used. Regular diamond bits will increase standpipe pressure slightlywhen bottom is tagged due to the reduction in flow area around the bit face.Whether the drilling operation is sliding or rotating, we recommend keepingdifferential at 60-75% of the maximum motor differential noted in the specifications.ROP (rate of penetration) is a function of rpm and tooth penetration. If rpm's aredecreased and tooth penetration is increased, the net effect may not amount tomuch increase in ROP, and it will certainly shorten stator life.Good weight transfer is normally accomplished with rotation of the
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 12/167
drill string, and optimization of ROP can be attained with incremental changes of WOB. We recommend (for sections of hole where long rotation periods are
anticipated) that bends be kept to a maximum of 1.5° (actual) and surface rotaryspeed be kept below 90 rpm.
If heat is a factor to be considered, special precautions should be taken. If the stator is swelling in heat, chunking of the stator material is most likely to occur after ashutdown of the pumps for whatever reason (survey, connection, repairs, wellcontrol, etc. ). For this reason, pumps should be brought up slowly, get the rotor turning first, then bring them gradually up to normal speed. When going back onbottom, ease into it gradually to minimize the shock to the heat swollen stator, andgive time to get some cool mud around it. It is also helpful to have a good cleanmud system with a lubricant in it that will lower friction between the rotor and stator.
As a rule, anything that helps lower friction between the drill string and the hole willalso help on the inside of the motor.
A motor stall is indicated when a sudden pressure increase is noted whiledrilling. When this occurs, it is imperative to immediately cut back on pumpstroke before lifting the motor up off bottom, especially if you are in the
rotating mode. This will reduce the increase in differential pressure that wascreated when the stalling occurred. If the rotor is not turning, and the drillstring is turning, the stator is spinning backward on the rotor, and failure willlikely occur in short order.
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 13/167
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 14/167
APPLICATIONS
Black Max now supplies one of the widest range of motor sizes available. It is thisvariety that allows us the flexibility to participate in almost any application withmaximum performance.
Performance\Straight Hole Drilling
With the advent of PDC bits and ever more powerful downhole motors, it hasbecome cost effective to pair the two when long straight hole sections are to be
drilled. PDC bits depend on rpm to make hole, and downhole motors are able todeliver the rpm to the bit with only minimum rotation on the drill string, thus savingwear and tear on both rig and drill string.
Black Max offers a full line of motors that have proven themselves in very deep, hot,high mud weight, small hole applications. The savings recognized by operators dueto reduced tubulars cost and savings in mud systems far outweighs the cost of motor
operation at depth.
Directional\Steerable Drilling
Black Max motors offer a surface adjustable bent housing that provides directionaldrillers with flexibility in the planning and execution of any directional drilling project.
The 3° adjustable sub allows the handling of any conventional open hole KO (kick-off) or sidetracking off a cement plug or drilling below a casing whip stock window.
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 15/167
The motors can be oriented with single shots, steering tools (magnetic or gyro) andMWD's (measurement-while-drilling). Left-hand reactive torque must becompensated for if orienting with single shots in a fluid circulating medium.
If a steerable system is to be used, Black Max motors again display their versatilitywith the screw on stabilizer on the bearing housing, thus providing one basicelement of a 'steerable system', the others being a durable, long range bit, and anMWD device with steering and possibly formation evaluation capabilities. Steerablesystems are invaluable to wells that have multiple targets, or complex approachpaths that are the result of geological constraints. The stabilization provided isnormally 1/8 to 1/4 inch less than hole gauge and can be tailored to the individual
needs of the directional driller, because of the rig site interchangeable stabilizer capability.
Horizontal / Short Radius Drilling
Black Max has a range of motor sizes suited to horizontal and short radiusapplications in various hole sizes. Black Max motors have performed medium radius
projects with build rates ranging from 10°-45°/100'. Short radius (46°-95°/100 ft.)and ultra-short radius projects (96°-128°/100 ft.) are also becoming morecommonplace. For angle building purposes, the motors can be run with or without anear bit stabilizer, with a single bend, with a double bend, or with
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 16/167
a flex joint in place of the second bend at the top of the motor. The flex joint allowslimited rotation during the build section to fine tune build rate. The flex joint alsorelieves strain at the top of the stator housing, and facilitates going through the curvesection during trips. When rotating in the lateral section we recommend a bent
housing maximum setting of 1.5
° (actual). This should be sufficient for minor course
corrections as drilling proceeds, and is sometimes enough to accomplish an openhole sidetrack on the low side, if a short gauge bit is being used.
Remedial\Workover Operations
Black Max provides a wide variety of power section options and motor sizes that will
accommodate almost any remedial need. Trying to rotate a small limber work stringat great depth with a power swivel is a headache at best, and nearly impossible in adeviated hole. Drilling out cement and guide shoes in small liners is efficiently andcost effectively accomplished by utilizing Black Max downhole motors.
Coiled Tubing
Black Max motors have been used for years to provide a power source for coiledtubing remedial operations. Recently, Black Max Motors have been used for drillingnew holes. Motor sizes range from 1 11/16”-5” O.D.. Torque restrictions in thecoiled tubing so far have limited hole size applications, but drilling rates have beenimpressive, using both fluid and air as a circulating medium.
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 17/167
Air Drilling
Black Max motors, due to their sealed bearing assembly, have proven themselveshighly adaptable to air drilling projects. The higher rotor/stator lobe configurationswith their high torque and slow rpm outputs have been the most successful. In anyair circulating medium, there must be some form of lubricant (mist, soap, petroleumbase, or polymer) to lower friction and heat generated between the rotor and stator.Dump valves cannot be used when air is the circulating medium.
Air volume requirements for various sizes of downhole motors are hard to equate withnon-compressible fluid. We have included an equation to give a starting point for
calculating air requirements relative to fluid requirements. The equation assumes anefficiency for compressor output, and an efficiency for the motor relative to fluidefficiency. Keep in mind that as the rotor turns, heat is generated that may cause stator swelling (possibly increasing standpipe pressure), thus affecting a decrease involumetric air delivery at the motor. Therefore, these volume calculations are meant asa loose guideline. Remember, lubrication is the key to good performance. We do not,in any circumstance, recommend running the downhole motor on dry air. This will result
in premature failure of the power section and cause damage to the motor.
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 18/167
Air Volume Formula:P1= Atmospheric or Surface Pressure (psi)
V1= Compressor Rated Output (cfm)
P2= Pressure above the Power Section (psi)
Pb= Bottom hole Pressure (psi)Pd= Differential Pressure across the Motor (cfm)V2= Equivalent cfm delivered to the Motor (cfm)
Choose gpm from motor specifications (gpm). This is Vm.When using fluid as a lubricant, subtract it from the chosen volume.
eg.
2.
3.
NOTE: V1 does not include compressor and motor efficiency.
lub1 V V V mm −=
)(48.7
)(
3
12
ft gal
gpmV V
m=
1
221
P
V P
V
×=
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 19/167
Since air compressor is able to compress air to high pressures and therefore, todifferent volumes at exit, a standard measurement is used for the intake volumetricrate of air. This volumetric rate is stated in standard cubic feet per minute (SCFM),which is a cubic foot of air at standard atmospheric conditions (14.696 psia and 59ºF) having a specific weight of 0/0765 lb/ft3.
Operating the downhole motor with air requires certain precautions. Start the drillingoperation after each connection with the bit just off bottom. Start up thecompressors and build up to motor requirements and ease weight on bit gently.Remember there is no dampening of vibration and shock, so be careful whenslacking off. Cut back on flow rate (50%) when off bottom. Motor stalls are hard to
detect quickly on the standpipe, but vibration of the drill string, and subsequent lackthereof, is a decisive indicator of motor stall. Contact your nearest Black Maxrepresentative for more information.
River Crossing\Utility Boring
Black Max is a recognized leader in the river crossing and utility boring industry. With
crossing projects being undertaken in formations with considerable compressivestrength, the addition of downhole motors with high torque deliverability and built indirectional capabilities was inevitable. The sealed bearing assembly protects thebearing section when solids control is less than perfect. The wide range of rotor/stator configurations have proven to be invaluable to contractors who engage in the highlyspecialized crossing field.
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 20/167
In a typical crossing operation, the bit enters the ground at an angle less thanhorizontal, proceeds down under the object to be crossed, is brought horizontal, thenback up to an exit point on the other side. The assembly is guided with a wirelinesteering tool, or a surface interactive sonde that can track the bit from above ground.The downhole motor is used on the pilot hole operation, with subsequent holeopening operations bringing the borehole to required diameter.
Small diameter motors are being used more and more for utility boringoperations in urban areas to install fiber optic cables and other utility conduits.The Black Max downhole motors have proven themselves to be cost-effectivewhen compared to alternative horizontal boring methods. Guidance for these
bores is similar to that described above.
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 21/167
FORMULAS
Horsepower
Pressure
5,252speedtorquehp (rpm)lb)(ft ×= ⋅mechanical
1,714
rateflowdroppressurehp
(gpm)(psi) ×=hydraulic
)(in
(ppg(gpm(psi2
2
areanozzle10,858)weightfluid)rateflow)P
××=bit across the
(ppg)weightmudoriginal
(ppg)weightmudnew(psi)mudoriginaldrop,press.(psi)P
×=ected exp
(ppg)(ft) weightfluiddepthvert.total0.052(psi)P ××=chydrostati
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 22/167
Velocity
Motor Efficiency
Buoyancy
Note: In order to calculate the correct drill collar string weight, the buoyancy factor must betaken into account. Using the table found on pg. 161, take the mud weight value you areusing and insert it in the above formula. Multiply the resulting buoyancy factor to the weightof the string in air. This will give you the weight of the string in the mud you are using.
(in)(in)
(gpm(ft/s
22O.D.gdrillstrinO.D.hole
)rateflow0.4085)v
−
×=annular
)(in
(gpm(ft/s)2
areanozzle
)rateflow0.3209v ×= jet
(gal/ft)
e)(gal/strok(spm)(ft/min)
capacityannular
outputpumpspeedpumpvel.ann.
×= pump
(psi)pressure(gpm)rateflow
(rpm)speedlb)(fttorque32.64%
×
×⋅×=
65.5
(ppg)weightmud65.5factor buoyancy
−=
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 23/167
RADIUS OF CURVATURE
Displacement Build Chart in Meters
Horizontal Displacement (meters)
TrueVerticalDepth(m
eters)
10090
8070
6050
40 deg / 30 m
30 deg / 30 m
25 deg / 30 m
22 deg / 30 m20 deg / 30 m
18 deg / 30 m
16 deg / 30 m
40 80 1200 160 200 240 280 320 360
0
40
80
120
160
200
240
280
320
360
14 deg / 30 m
12 deg / 30 m
10 deg / 30 m
9 deg / 30 m
8 deg / 30 m
7 deg / 30 m
6 deg / 30 m
5 deg / 30 m
Displacement Build Chart in Feet
Horizontal Displacement (feet)
TrueVertic
alDepth
(feet)
0
100
200
300
400
500
600
700
800
900
1000
1100
1200
100 200 3000 400 500 600 700 800 900 1000 1100 1200
5 deg / 100 ft
14 deg / 100 ft
12 deg / 100 ft
10 deg / 100 ft
9 deg / 100 ft
8 deg / 100 ft
7 deg / 100 ft
6 deg / 100 ft
16 deg / 100 ft
22 deg / 100 ft
40 deg / 100 ft
18 deg / 100 ft
25 deg / 100 ft
20 deg / 100 ft
30 deg / 100 ft
100
70
90
60
80
50
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 24/167
Build Rate Formula (Approximate)
D = hole diameter or bit diameter P = pad diameter T = tool diameter B = bit to bend length (including bit length)F = factor, use table below
1.
2.
3.
×
−= −
B2
PDtanu
1
( )( )
2cosF2
uFsin
cosF
2
T
2
PDB
2
P-D
R
2
2
−
−×−−++
=
pR
216,000/100ft.ratebuild =
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 25/167
If no pad is present on the tool, then P=T. All dimensions are in inches and angles in degrees.
Tool Setting Factor ‘F’
0 00.39 0.25
0.78 0.50
1.15 0.75
1.50 1.00
1.83 1.252.12 1.50
2.38 1.75
2.60 2.00
2.77 2.25
2.90 2.502.97 2.75
3.00 3.00
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 26/167
FLUID BYPASS CALCULATIONS
The following calculations are supplied in order to obtain the correct jet sizes for fluidbypass requirements:
FORMULAS:
h (pressure) = ft of head
Q (flow rate) = ft3/min
v (velocity) = [(2gh)/SP] 1/2 = ft/min
SP (specific gravity) = density of mud density of water
A (flow area) = Q = ft2
v
g (gravity) = 32.2 ft/s²
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 27/167
SAMPLE CALCULATION:
Jet size needed for bypassing 60 gpm of 12.2 lb mud at 360 psi:
SP = density of mud = 12.2 lb/gal = 1.46 density of water 8.34 lb/gal
v = [(2gh)/SP] 1/2 = [(2)(32.2 ft/s²)(360 psi x 2.31)/1.46] 1/2
= 191.52 ft/s x 60 s/min
= 11,491 ft/min
Q = 60 gal/min. = 60 gal / min
7.481 gal / ft3
= 8.02 ft3/min.
A = Qv = 8.02 ft / m in
11,491ft / min
3
= 0.0007 ft2
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 28/167
Hole ∅ = (4 A/Π) 1/2 = [(4)(0.0007 ft2)/Π] 1/2 = 0.0298 ft
= 0.3576 in
Jet size = Hole ∅ x *32
= 0.3576 in. (32)
= 11.4
*('32' refers to an incremental value needed to obtain jet size - see most bit manuals)
∴USE BIT JET SIZE OF #11 OR #12
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 29/167
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 30/167
Another important factor to keep in mind is mud weight. As a rule, heavier mudweights create more wear on the motors. Combined with high sand content, thiscould be extremely detrimental to the motor. Generally, when using heavier muds,ie. 12 lb +, extreme care should be taken to keep sand content as low as possible to
prevent washing in the motor. Sand content should not be greater than 1/2%going in. Contact a Black Max representative for more information.
Temperature is also a factor in performance. In the case of hot hole applications,Black Max will supply specialized power sections. DO NOT attempt to use these inareas of lower temperature. These stators have a loose fit designed to incorporate
swelling or specialty elastomers (eg. HSN). If used in lower temperatures, it will onlyprovide a small percentage of power specified.
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 31/167
FLUID TYPE ELASTOMER RECOMMENDATIONS
ASTM #3
Neither HSN nor Nitrile elastomers are suitable for use in ASTM #3 oil, due to its low aniline point. HSN seems to holdits properties at 350 F, but any drop in temperature will makeit unsuitable.
CUTTER D
Standard Nitrile is not suitable for use with Cutter D, due tohigh volume swell.HSN should work well to 250 F, provided proper fit ismaintained.
DIESEL
Standard Nitrile is not suitable for use with diesel, due to high
volume swell.Oversize stators of HSN elastomer are well suited to diesel.
INVERMULEHSN is suitable for use in Invermule.Standard Nitrile is not suitable for Invermule mud.
LIGNO-SULPHONATE
Both Nitrile and HSN are suitable for use in Lignosulphonite. An oversize stator is recommended for Nitrile.
MENTOR 26
Both Nitrile and HSN are suitable for use in Mentor 26, up to
temperatures of 350 F. An oversize stator is recommended for thermal expansion.
MUDZYMEBoth Nitrile and HSN are suitable for use in Mudzyme.
An oversize stator is recommended for Nitrile at 250 F.
NITROGENBoth Nitrile and HSN are suitable for drilling with Nitrogenwith the addition of DA-001 as a lubricant.
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 32/167
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 33/167
SPECIFICATIONS
The following sections show specifications recommended for the proper operation of Black Max motors.
The performance graphs that accompany the specifications show maximumdifferential working (on/off bottom) pressure, torque, rpm, and horsepower asfollows:
Maximum Pressure Differential: This is the maximum designed pressure dropped
across the illustrated power section. It is indicated on the graph as ‘MAX. DIFF.’. Inthis case, the pressure differential is 600 psi. For optimum performance and life, thispressure should not be exceeded.
Working Pressure: Due to losses from friction, turbulence, and pressure, theWorking Pressure will be less than the Maximum Pressure Differential:
To determine the working pressure at 175 gpm, find the line marked ‘rpm-175 gpm’.There is 75 psi indicated on the graph as ‘Press. Loss’. This is the pressure lossthrough the motor at 175 gpm with no load on the bit. Therefore,
LossPressurePressurealDifferentiMaximumPressureWorking −=
ipsi75psi600PressureWorking ps525=−=
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 34/167
It is offset to the left of the ‘MAX. DIFF.’ line by an amount equal to the pressure loss(75 psi). Reading this line across the graph to the right will give you a Torquereading. For this example, torque is 1600 ft-lb.Rpm: To read rpm, find the line labeled ‘rpm-175 gpm’, and follow it to where itintersects the line labeled ‘MAX. DIFF.’. Reading across the graph to the left, the
rpm is 133 rpm.Horsepower : To determine the horsepower you must know the rpm and the torqueat which you are running.
{PRES.
LOSS
40
80
120
200100 300 400
rpm - 100 gpm
T O R Q
U E
{
}
160
200
240
280
320
rpm - 250 gpm
rpm - 175 gpm
LOSS
PRES.
PRES.LOSS
300
600
900
500 600 700 800
1,200
1,500
1,800
2,100
2,400
MAX.DIFF
.
PRESSURE DIFFERENTIAL (psi)
SP
EED
(rpm)
TO
RQUE
ftlb
*
40.55252
lbft1600133
5252
torquerpmhp =
⋅×=
×=
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 35/167
1 11/16" 1.68" 1-2 3 STAGE (168-1)
PRESSURE DIFFERENTIAL psi
rpm - 15 gpm
SPEED
rpm
500
250
750
150
75
225
300
T O R Q U E
1,750
1,250
1,000
1,500
2,000
rpm - 25 gpm
rpm - 35 gpm
TORQ
UE
ftlb
15
10
5
375
450
525
600
40
35
30
25
20
MAX.D
IFF.
.
Stator Configuration 1 11/16" 1.68" 1-2, 3 Stage
Bearing Assembly 1 11/16" 43 mmVolume 15-35 gpm 57-133 lpm
Speed 534-1,756 rpm
Torque 25 ft-lb 34 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 450 psi 3,103 kPa
Bit To Bend Length 22" 559 m m
O/A Length 86" 2,184 mm
Hole Size 1 7/8"-3" 48-76 m m
Top Connection AW -RO D
Bottom Connection AW -RO D
Bearing Load dynamic=2,500 lb 1,110 daN
(compression) static=6,000 lb 2,670 daN
Bearing Load dynamic=2,500 lb 1,110 daN
(tension) static=6,000 lb 2,670 daN
Max. Overpull
(for re-runs)
Ab so lu te Overp ull 28,000 lb 12,455 daN
6,000 lb 2,670 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
15 534-797 25 2.5
25 976-1,238 25 4.6
35 1,492-1,756 25 7.1
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 36/167
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 37/167
PERFORMANCE
100
200
300
400
500
600
700
800
100 200 300 400 500 600 700 800
20
40
60
80
100
120
140
160
TORQUE
FTLB
SPEED
RPM
PRESSURE DIFFERENTIAL PSI
rpm - 15 gpm
MAX.D
IFF.
1 11/16" 1.68" 5-6 5 STAGE (168-3)
T O R Q U E
rpm - 30 gpm
rpm - 45 gpm
Stator Configuration 1 11/16" 1.68" 5-6, 5 Stage
Bearing Assembly 1 11/16" 43 mmVolume 15-45 gpm 57-170 lpm
Speed 0 - 645 rpm
Torque 103 ft-lb 104 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 750 psi 5,171 kPa
Bit to Bend Length 22" 559 mm
O/A Length 130" 3,302 mm
Hole Size 1 7/8"-3" 48-76 mm
Top Connection AW-ROD
Bottom Connection AW-ROD
Bearing Load dynamic=2,500 lb 1,110 daN
(compression) static=6,000 lb 2,670 daN
Bearing Load dynamic=2,500 lb 1,110 daN
(tension) static=6,000 lb 2,670 daN
Max. Overpull 6,000 lb
(for re-runs)
Ab so lu te Ov erpu ll 28, 000 l b 12 ,4 55 da N
2,670 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
15 0-212 103 0.0
30 35-430 103 0.7
45 190-645 103 3.7
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 38/167
200
400
600
800
1,000
1,200
1,400
1,600
50
100
150
200
250
300
350
400
5
10
15
20
25
30
35
40
MAX
.DIFF.
rpm - 25 gpm
rpm - 35 gpm
rpm - 45 gpm
T O R Q U E
2 1/16" 2.06" 1-2 2 STAGE (206-1)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Stator Configuration 2 1/16" 2.06" 1-2, 2 Stage
Bearing Assembly 2 1/16" 52 mmVolume 25-45 gpm 95-170 lpm
Speed 575-1,219 rpm
Torque 25 ft-lb 34 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 300 psi 2,068 kPa
Bit to Bend Length 29" 737 mm
O/A Length 105" 2,667 m m
Hole Size 2 7/16"-3 1/2" 62-89 m m
Top Connection AW -RO D
Bottom Connection AW -RO D
Bearing Load dynamic=8,375 lb 3,725 daN
(compression) static=5,800 lb 2,580 daN
Bearing Load dynamic=3,350 lb 1,490 daN
(tension) static=2,300 lb 1,025 daN
Max. Overpull
(for re-runs)
Abso lu te Overpu ll 33,500 lb 14,900 daN
2,300 lb 1,025 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
25 575-683 25 2.7
35 852-960 25 4.1
45 1,111-1,219 25 5.3
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 39/167
HOT HOLE
50
100
150
200
250
300
350
400
25
50
75
100
125
150
175
200
10
20
30
40
50
60
70
80
rpm - 20 gpm
MAX.D
IFF.
rpm - 35 gpm
rpm - 50 gpm
T O R Q U
E
2 1/16" 2.06" 4-5 1 STAGE (206-2)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Stator Configuration 2 1/16" 2.06" 4-5, 1 Stage
Bearing Assembly 2 1/16" 52 mmVolume 20-50 gpm 76-189 lpm
Speed 92-303 rpm
Torque 52 ft-lb 71 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 155 psi 1,069 kPa
Bit to Bend Length 29" 737 m m
O/A Length 82" 2,083 mm
Hole Size 2 7/16"-3 1/2" 62-89 mm
Top Connection AW -RO D
Bottom Connection AW -RO D
Bearing Load dynamic=8,375 lb 3,725 daN
(compression) static=5,800 lb 2,580 daN
Bearing Load dynamic=3,350 lb 1,490 daN
(tension) static=2,300 lb 1,025 daN
Max. Overpull
(for re-runs)
Abso lu te Overpu ll 33,500 lb 14,900 daN
2,300 lb 1,025 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
20 92-118 52 0.9
35 187-213 43 1.5
50 277-303 39 2.0
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 40/167
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 41/167
200
400
600
800
1,000
1,200
1,400
1,600
150
300
450
600
750
900
1,050
1,200
15
30
45
60
75
90
105
120
rpm - 20 gpm
rpm - 35 gpm
rpm - 50 gpm
MAX.DIFF.
T O R Q U E
2 3/8" 2.37" 1-2 7 STAGE (237-1)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Stator Configuration 2 3/8" 2.37" 1-2, 7 Stage
Bearing Assembly 2 3/8" 60 mmVolume 20-50 gpm 76-189 lpm
Speed 400-1,363 rpm
Torque 85 ft-lb 115 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 880 psi 6,067 kPa
Bit to Bend Length 35" 889 m m
O/A Length 171" 4,343 m m
Hole Size 3 1/8"-4 1/2" 79-114 m m
Top Connection BW-ROD
Bottom Connection BW-ROD
Bearing Load dynam ic=8,800 lb 3,915 daN
(compression) static=6,650 lb 2,960 daN
Bearing Load dynam ic=3,525 lb 1,570 daN
(tension) static=2,650 lb 1,180 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 40,500 lb 18,015 daN
2,650 lb 1,180 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
20 400-549 85 6.5
35 815-963 85 13.2
50 1,215-1,363 85 19.6
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 42/167
125
250
375
500
625
750
875
1000
75
150
225
300
375
450
525
600
15
30
45
60
75
90
105
120
rpm - 20 gpm
MAX.DIFF
.
T O R Q U E
2 3/8" 2.37" 2-3 4.0 STAGE (237-4)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TO
RQUE
ftlb.rpm - 45 gpm
rpm - 65 gpm
Stator Configuration 2 3/8" 2.37" 2-3, 4.0 Stage
Bearing Assembly 2 3/8" 60 mmVolume 20-65 gpm 76 - 247 lpm
Speed 168-912 rpm
Torque 95 ft-lb 129 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 554 psi 3,820 kPa
Bit to Bend Length 35" 889 mm
O/A Length 144" 3,658 mm
Hole Size 3 1/8"-4 1/2" 79-114 mm
Top Connection B W -ROD
Bottom Connection B W -ROD
Bearing Load dynamic=8,800 lb 3,915 daN
(compression) static=6,650 lb 2,960 daN
Bearing Load dynamic=3,525 lb 1,570 daN
(tension) static=2,650 lb 1,180 daN
Max. Overpull 2,650 lb
(for re-runs)
Ab so lu te Over pu ll 40 ,500 lb 18 ,0 15 da N
1,180 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
20 168 - 287 95 3.0
45 534 - 634 93 9.5
65 814 - 912 91 14.1
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 43/167
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 44/167
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 45/167
125
250
375
500
625
750
875
1,000
100
200
300
400
500
600
700
800
30
60
90
120
150
180
210
240
MAX
.DIFF.
T O R Q
U E
rpm - 20 gpm
rpm - 45 gpm
rpm - 70 gpm
2 7/8" 2.87" 1-2 5.2 STAGE (287-1)
SPE
ED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Stator Configuration 2 7/8" 2.87" 1-2, 5.2 Stage
Bearing Assembly 2 7/8" 73 mmVolume 20-70 gpm 76-265 lpm
Speed 145-780 rpm
Torque 153 ft-lb 207 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 650 psi 4,482 kPa
Bit to Bend Length 40" 1,016 mm
O/A Length 185" 4,699 mm
Hole Size 3 1/2"-4 1/2" 89-114 m m
Top Connection 2 3/8 Reg., N-Rod
Bottom Connection 2 3/8 Reg., N-Rod
Bearing Load dynamic=13,650 lb 6,070 daN
(compression) static=10,750 lb 4,780 daN
Bearing Load dynamic=5,450 lb 2,425 daN
(tension) static=4,300 lb 1,915 daN
Max. Overpull
(for re-runs)
Abso lu te Overpu ll 62,000 lb 27,580 daN
4,300 lb 1,915 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
20 145-220 153 4.2
45 425-570 153 12.4
70 715-780 153 20.8
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 46/167
125
250
375
500
625
750
875
1,000
125
250
375
500
625
750
875
1,000
30
60
90
120
150
180
210
240
MAX
.DIFF.
T O R Q
U E
rpm - 40 gpm
2 7/8" 2.87" 2-3 7 STAGE (287-7)
SPE
ED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
rpm - 55 gpm
rpm - 70 gpm
Stator Configuration 2 7/8" 2.87" 2-3, 7 Stage
Bearing Assembly 2 7/8" 73 mmVolum e 40-70 gpm 151-265 lpm
Speed 369-845 rpm
Torque 182 ft-lb 247 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 970 psi 6,688 kPa
Bit to Bend Length 40" 1,016 m m
O/A Length 158" 4,013 m m
Hole Size 3 1/2"-4 1/2"
Bit Conn. 2 3/8 Reg., N-Rod
Top Conn. 2 3/8 Reg., N-Rod
Bearing Load dynam ic=13,650 lb 6,070 daN
(compression) static=10,750 lb 4,780 daN
Bearing Load dynam ic=5,450 lb 2,425 daN
(tension) static=4,300 lb 1,915 daN
Max. Overpull 4 ,300 lb 1,915 daN
(for re-runs)
Abso lu te Ov er pu ll 62 ,000 lb 27 ,5 80 da N
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
40 369 - 495 182 12.7
55 539 - 668 182 18.6
70 719 - 845 180 24.6
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 47/167
50
100
150
200
250
300
350
400
75
150
225
300
375
450
525
600
25
50
75
100
125
150
175
200
MAX.DIFF.
T O R Q
U E
rpm - 25 gpm
2 7/8" 2.87" 3-4 4 STAGE LOW FLOW (287-2)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftl b
.
rpm - 40 gpm
rpm - 10 gpm
Stator Configuration 2 7/8" 2.87" 3-4, 4 Stage
Bearing Assembly 2 7/8" 73 mmVolume 10-40 gpm 38-152 lpm
Speed 50-320 rpm
Torque 143 ft-lb 194 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 548 psi 3,778 kPa
Bit to Bend Length 40" 1,016 mm
O/A Length 121" 3,073 mm
Hole Size 3 1/2"-4 1/2" 89-114 m m
Bit Conn. 2 3/8 Reg., N-Rod
Top Conn. 2 3/8 Reg., N-Rod
Bearing Load dynamic=13,650 lb 6,070 daN
(compression) static=10,750 lb 4,780 daN
Bearing Load dynamic=5,450 lb 2,425 daN
(tension) static=4,300 lb 1,915 daN
Max. Overpull
(for re-runs)
Abso lu te Overpu ll 62,000 lb 27,580 daN
4,300 lb 1,915 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
10 50-75 143 1.4
25 172-197 142 4.7
40 290-320 141 7.8
LOW FLOW
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 48/167
75
150
225
300
375
450
525
600
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
40
80
120
160
200
240
280
320
rpm - 20 gpm
M A X
. D I F F .
T O R Q
U E
2 7/8" 2.87" 5-6 3.3 STAGE (287-4)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t l b .
rpm - 50 gpm
rpm - 80 gpm
Stator Configuration 2 7/8" 2.87" 5-6, 3.3 Stage
Bearing Assembly 2 7/8" 73 mmVolume 20-80 gpm 76-303 lpm
Speed 65-417 rpm
Torque 190 ft-lb 258 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 517 psi 3,565 kPa
Bit to Bend Length 40" 1,016 mm
O/A Length 123" 3,124 mm
Hole Size 3 1/2"-4 1/2" 89-114 mm
Top Connection 2 3/8 Reg., N-Rod
Bottom Connection 2 3/8 Reg., N-Rod
Bearing Load dynamic=13,650 lb 6,070 daN
(compression) static=10,750 lb 4,780 daN
Bearing Load dynamic=5,450 lb 2,425 daN
(tension) static=4,300 lb 1,915 daN
Max. Overpull
(for re-runs)
Abs olu te Ove rpu ll 62,000 lb 27,580 daN
4,300 lb 1,915 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
20 65-105 190 2.4
50 225-265 183 7.8
80 377-417 167 12.0
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 49/167
75
150
225
300
375
450
525
600
100
200
300
400
500
600
700
800
75
150
225
300
375
450
525
600
MA
X.DIFF.
T O R Q
U E
2 7/8" 2.87" 7-8 2.5 STAGE (287-6)
SP
EED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftl b
.
rpm - 70 gpm
rpm - 90 gpm
rpm - 110 gpm
Stator Configuration 2 7/8" 2.87" 7-8 2.5 Stage
Bearing Assembly 2 7/8" 73 mmVolume 70-110 gpm 265-416 lpm
Speed 198-423 rpm
Torque 250 ft-lb 339 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 490 psi 3,378 kPa
Bit to Bend Length 40" 1,016 mm
O/A Length 115" 2,921 mm
Hole Size 3 1/2"-4 1/2" 89-114 mm
Top Connection 2 3/8 Reg., N-Rod
Bottom Connection 2 3/8 Reg., N-Rod
Bearing Load dynamic=13,650 lb 6,070 daN
(compression) static=10,750 lb 4,780 daN
Bearing Load dynamic=5,450 lb 2,425 daN
(tension) static=4,300 lb 1,915 daN
Max. Overpull
(for re-runs)
Abso lu te Overpu ll 62,000 lb 27,580 daN
4,300 lb 1,915 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
70 198-257 250 9.4
90 276-335 215 11.3
110 378-423 180 12.9
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 50/167
75
150
225
300
375
450
525
600
100
200
300
400
500
600
700
800
75
150
225
300
375
450
525
600
MA
X.DIFF.
T O R Q
U E
3 1/8" 2.87" 7-8 2.5 STAGE (312-1)
SP
EED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftl b
.
rpm - 70 gpm
rpm - 90 gpm
rpm - 110 gpm
Stator Configuration 3 1/8" 2.87" 7-8, 2.5 Stage
Bearing Assembly 3 1/8" 79 mmVolume 70-110 gpm 265-416 lpm
Speed 198-423 rpm
Torque 250 ft-lb 339 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 475 psi 3,275 kPa
Bit to Bend Length 32" 813 mm
O/A Length 102" 2,591 mm
Hole Size 3 3/4"-4 3/4" 95-121 mm
Top Connection 2 3/8 Reg.
Bottom Connection 2 3/8 Reg.
Bearing Load dynam ic=12,000 lb 5,340 daN
(compression) static=36,000 lb 16,015 daN
Bearing Load dynam ic=12,000 lb 5,340 daN
(tension) static=36,000 lb 16,015 daN
Max. Overpull
(for re-runs)
Abso lu te Overpul l 68,000 lb 30,250 daN
36,000 lb 16,015 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
70 198-257 250 9.4
90 276-335 215 11.3
110 378-423 180 12.9
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 51/167
40
80
120
160
200
240
280
320
100
200
300
400
500
600
700
800
150
300
450
600
750
900
1,050
1,200
rpm - 80 gpm
MAX
.D
IFF.
T O R Q
U E
3 1/8" 3.13" 7-8 3 STAGE (312-2)
SP
EED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftl b
.rpm - 110 gpm
rpm - 140 gpm
Stator Configuration 3 1/8" 3.13" 7-8, 3 Stage
Bearing Assembly 3 1/8" 79 mm
Volume 80-140 gpm 303-530 lpm
Speed 122-249 rpm
Torque 665 ft-lb 902 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 600 psi 4,137 kPa
Bit to Bend Length 32" 813 m m
O/A Length 156" 3,962 m m
Hole Size 3 3/4"-4 3/4" 95-121 m m
Top Connection 2 3/8 Reg.
Bottom Connection 2 3/8 Reg.
Bearing Load dynam ic=12,000 lb 5,340 daN
(compression) static=36,000 lb 16,015 daN
Bearing Load dynam ic=12,000 lb 5,340 daN
(tension) static=36,000 lb 16,015 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 68,000 lb 30,245 daN
36,000 lb 16,015 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
80 122-141 665 13.8
110 170-189 560 18.1
140 230-249 440 19.3
PERFORMANCE
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 52/167
75
150
225
300
375
450
525
600
100
200
300
400
500
600
700
800
75
150
225
300
375
450
525
600
rpm - 70 gpm
MAX.DIFF.
T O R Q
U E
3 1/8" 3.13" 7-8 4 STAGE (312-3)
SP
EED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftl b
.
rpm - 90 gpm
rpm - 110 gpm
Stator Configuration 3 1/8" 3.13" 7-8, 4 Stage
Bearing Assembly 3 1/8" 79 mm
Volume 70-110 gpm 265-454 lpm
Speed 198-432 rpm
Torque 422 ft-lb 572 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 750 psi 5,171 kPa
Bit to Bend Length 32" 813 m m
O/A Length 124" 3,150 m m
Hole Size 3 3/4"-4 3/4" 95-121 m m
Top Connection 2 3/8 Reg.
Bottom Connection 2 3/8 Reg.
Bearing Load dynam ic=12,000 lb 5,340 daN
(compression) static=36,000 lb 16,015 daN
Bearing Load dynam ic=12,000 lb 5,340 daN
(tension) static=36,000 lb 16,015 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 68,000 lb 30,250 daN
36,000 lb 16,015 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
70 198-250 422 15.9
90 276-328 395 20.8
110 348-400 355 23.5
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 53/167
150
300
450
600
750
900
1,050
1,200
125
250
375
500
625
750
875
1,000
50
100
150
200
250
300
350
400
MAX
.DIFF.
rpm - 120 gpm
rpm - 150 gpm
rpm - 180 gpm
T O R Q U E
3 3/8" 3.37" 1-2 5 STAGE (338-1)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Stator Configuration 3 3/8" 3.37" 1-2, 5 Stage
Bearing Assembly 3 3/8" 86 m m
Volume 120-180 gpm 454-681 lpm
Speed 490-933 rpm
Torque 320 ft-lb 434 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 750 psi 5,171 kPa
Bit to Bend Length 51" 1,295 m m
O/A Length 259" 6,579 m m
Hole Size 4 1/4" - 5 7/8" 108-149 m m
Top Connection 2 3/8 Reg., 2 3/8 IF
Bottom Connection 2 3/8 Reg., 2 7/8 Reg.
Bearing Load dynam ic=26,525 lb 11,800 daN
(compression) static=73,325 lb 32,615 daN
Bearing Load dynam ic=13,250 lb 5,895 daN
(tension) static=36,650 lb 16,300 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 95,000 lb 42,255 daN
36,650 lb 16,300 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
120 490-640 320 29.6
150 636-786 320 38.8
180 783-933 320 47.7
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 54/167
50
100
150
200
250
300
350
400
100
200
300
400
500
600
700
800
75
150
225
300
375
450
525
600
rpm - 30 gpmMAX.DIFF.
T O R Q
U E
3 3/8" 3.37" 4-5 5 STAGE (338-2)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TO
RQUE
ftlb.
rpm - 75 gpm
rpm - 120 gpmStator Configuration 3 3/8" 3.37" 4-5, 5 Stage
Bearing Assembly 3 3/8" 86 mm
Volume 30-120 gpm 114-454 lpm
Speed 66-366 rpm
Torque 435 ft-lb 590 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 675 psi 4,654 kPa
Bit to Bend Length 51" 1,295 m m
O/A Length 194" 4,928 m m
Hole Size 4 1/4" - 5 7/8" 108-149 m m
Top Connection 2 3/8 Reg., 2 3/8 IF
Bottom Connection 2 3/8 Reg., 2 7/8 Reg.
Bearing Load dynam ic=26,525 lb 11,800 daN
(compression) static=73,325 lb 32,615 daN
Bearing Load dynam ic=13,250 lb 5,895 daN
(tension) static=36,650 lb 16,300 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 95,000 lb 42,255 daN
36,650 lb 16,300 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
30 66-86 435 5.5
75 206-226 430 16.9
120 346-366 415 27.4
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 55/167
25
50
75
100
125
150
175
200
75
150
225
300
375
450
525
600
150
300
450
600
750
900
1,050
1,200
rpm - 60 gpm
MA X
.DIFF.
T O R Q
U E
3 3/8" 3.37" 7-8 3 STAGE (338-4)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TO
RQUE
ftlb.
rpm - 90 gpm
rpm - 120 gpm
Stator Configuration 3 3/8" 3.37" 7-8, 3 Stage
Bearing Assembly 3 3/8" 86 m m
Volume 60-120 gpm 227-454 lpm
Speed 74-180 rpm
Torque 764 ft-lb 1,036 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 562 psi 3,875 kPa
Bit to Bend Length 51" 1,295 m m
O/A Length 194" 4,928 m m
Hole Size 4 1/4" - 5 7/8" 108-149 m m
Top Connection 2 3/8 Reg., 2 3/8 IF
Bottom Connection 2 3/8 Reg., 2 7/8 Reg.
Bearing Load dynam ic=26,525 lb 11,800 daN
(compression) static=73,325 lb 32,615 daN
Bearing Load dynam ic=13,250 lb 5,895 daN
(tension) static=36,650 lb 16,300 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 95,000 lb 42,255 daN
36,650 lb 16,300 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
60 74-95 764 10.8
90 120-143 660 15.1
120 159-180 540 16.3
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 56/167
50
100
150
200
250
300
350
400
100
200
300
400
500
600
700
800
100
200
300
400
500
600
700
800
rpm - 60 gpm
MAX.DIFF.
rpm - 90 gpm
rpm - 120 gpm
T O R Q U E
3 3/8" 3.37" 9-10 3 STAGE (338-6)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TO
RQUE
ftlb.
Stator Configuration 3 3/8" 3.37" 9-10, 3 Stage
Bearing Assembly 3 3/8" 86 mm
Volume 60-120 gpm 227-454 lpm
Speed 125-317 rpm
Torque 475 ft-lb 644 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 642 psi 4,426 kPa
Bit to Bend Length 51" 1,295 mm
O/A Length 133" 3,378 mm
Hole Size 4 1/4" - 5 7/8" 108-149 m m
Top Connection 2 3/8 Reg., 2 3/8 IF
Bottom Connection 2 3/8 Reg., 2 7/8 Reg.
Bearing Load dynam ic=26,525 lb 11,800 daN
(compression) static=73,325 lb 32,615 daN
Bearing Load dynam ic=13,250 lb 5,895 daN
(tension) static=36,650 lb 16,300 daN
Max. Overpull
(for re-runs)
Abso lu te Ov erpu ll 95,000 lb 42,255 daN
36,650 lb 16,300 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
60 125-159 475 11.3
90 203-234 420 16.2
120 283-317 345 18.6
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 57/167
75
150
225
300
375
450
525
600
100
200
300
400
500
600
700
800
100
200
300
400
500
600
700
800
rpm - 30 gpm
MAX.DIFF.
T O R Q
U Erpm - 75 gpm
rpm - 120 gpm
3 3/4" 3.37" 4-5 5 STAGE (375-2)
SP
EED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftl b
.
Stator Configuration 3 3/4" 3.37" 4-5, 5 Stage
Bearing Assembly 3 3/4" 95 mm
Volume 30-120 gpm 114-454 lpm
Speed 66-366 rpm
Torque 435 ft-lb 590 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 675 psi 4,654 kPa
Bit to Bend Length 38" 965 m m
O/A Length 187" 4,750 m m
Hole Size 4 3/4" - 5 7/8" 121-149 m m
Top Connection 2 3/8 Reg., 2 3/8 IF
Bottom Connection 2 7/8 Reg.
Bearing Load dynam ic=20,575 lb 9,150 daN
(compression) static=67,500 lb 30,025 daN
Bearing Load dynam ic=20,575 lb 9,150 daN
(tension) static=67,500 lb 30,025 daN
Max. Overpull
(for re-runs)
Ab so lu te Over pu ll 150,000 lb 66,720 daN
67,500 lb 30,025 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
30 66-86 435 5.5
75 206-226 430 16.9
120 346-366 415 27.4
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 58/167
25
50
75
100
125
150
175
200
7 5
1 5 0
2 2 5
3 0 0
3 7 5
4 5 0
5 2 5
6 0 0
150
300
450
600
750
900
1,050
1,200
rpm - 60 gpm
M A X
. D I F F .
T O R Q
U E
3 3/4" 3.37" 7-8 3 STAGE (375-4)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t l b .
rpm - 90 gpm
rpm - 120 gpm
Stator Configuration 3 3/4" 3.37" 7-8, 3 Stage
Bearing Assembly 3 3/4" 95 mm
Volume 60-120 gpm 227-454 lpm
Speed 74-180 rpm
Torque 764 ft-lb 1,036 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 562 psi 3,875 kpa
Bit to Bend Length 38" 965 m m
O/A Length 187" 4,750 m m
Hole Size 4 3/4" - 5 7/8" 121-149 m m
Top Connection 2 3/8 Reg., 2 3/8 IF
Bottom Connection 2 7/8 Reg.
Bearing Load dynam ic=20,575 lb 9,150 daN
(compression) static=67,500 lb 30,025 daN
Bearing Load dynam ic=20,575 lb 9,150 daN
(tension) static=67,500 lb 30,025 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 150,000 lb 66,720 daN
67,500 lb 30,025 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
60 74-95 764 10.8
90 120-143 660 15.1
120 159-180 540 16.3
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 59/167
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 60/167
50
100
150
200
250
300
350
400
100
200
300
400
500
600
700
800
100
200
300
400
500
600
700
800
rpm - 60 gpm
MAX.
DIFF.
rpm - 90 gpm
rpm - 120 gpm
T O R Q U E
3 3/4" 3.37" 9-10 3 STAGE (375-6)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TO
RQUE
ftlb.
Stator Configuration 3 3/4" 3.37" 9-10, 3 Stage
Bearing Assembly 3 3/4" 95 mm
Volume 60-120 gpm 227-454 lpm
Speed 125-317 rpm
Torque 475 ft-lb 644 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 642 psi 4,413 kPa
Bit to Bend Length 38" 965 m m
O/A Length 120" 3,048 mm
Hole Size 4 3/4" - 5 7/8" 121-149 m m
Top Connection 2 3/8 Reg., 2 3/8 IF
Bottom Connection 2 7/8 Reg.
Bearing Load dynamic=20,575 lb 9,150 daN
(compression) static=67,500 lb 30,025 daN
Bearing Load dynamic=20,575 lb 9,150 daN
(tension) static=67,500 lb 30,025 daN
Max. Overpull
(for re-runs)
Ab so lu te Overpu ll 150,000 lb 66,720 daN
67,500 lb 30,025 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
60 125-159 475 11.3
90 203-234 420 16.2
120 283-317 345 18.6
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 61/167
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 62/167
20
40
60
80
100
120
140
160
75
150
225
300
375
450
525
600
200
400
600
800
1000
1200
1400
1600
MAX.DIFF.
T O
R Q U E
3 3/4" 3.75" 7-8 2.3 STAGE (375-3)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb
rpm - 100 gpm
rpm - 130 gpm
rpm - 160 gpm
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
100 60-76 1,125 12.9
130 83-98 950 15.0
160 106-121 725 14.6
Stator Configuration 3 3/4" 3.75" 7-8, 2.3 Stage
Bearing Assembly 3 3/4" 95 mm
Volume 100-160 gpm 379-606 lpm
Speed 60-121 rpm
Torque 1,125 ft-lb 1,525 n*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 428 psi 2,951 kPa
Bit to Bend Length 38" 965 mm
O/A Length 204" 5,182 mm
Hole Size 4 3/4" - 5 7/8" 121-149 mm
Top Connection 2 3/8 Reg., 2 3/8 IF
Bottom Connection 2 7/8 Reg.
Bearing Load dynamic=20,575 lb 9,150 daN
(compression) static=67,500 lb 30,025 daN
Bearing Load dynamic=20,575 lb 9,150 daN
(tension) static=67,500 lb 30,025 daN
Max. Overpull
(for re-runs)
Abs olu te Ove rpu ll 150,000 lb 66,720 daN
67,500 lb 30,025 daN
PERFORMANCE
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 63/167
25
50
75
100
125
150
175
200
100
200
300
400
500
600
700
800
200
400
600
800
1000
1200
1400
1600
rpm - 80 gpm
MAX
.DIFF.
rpm - 140 gpm
rpm - 200 gpm
T O R Q U E
4 1/8" 3.87" 6-7 3 STAGE (387-1)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftl b
.
Stator Configuration 4 1/8" 3 7/8" 6-7, 3 Stage
Bearing Assembly 4 1/8" 105 mm
Volume 80-200 gpm 303-757 lpm
Speed 65-146 rpm
Torque 1,260 ft-lb 1,709 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 580 psi 4,000 kPa
Bit to Bend Length 49" 1,245 m m
O/A Length 187" 4,750 m m
Hole Size 4 3/4" - 5 7/8" 121-149 m m
Top Connection 2 3/8 Reg., 2 3/8 IF
Bottom Connection 2 7/8 Reg.
Bearing Load dynam ic=50,000 lb 22,240 daN
(compression) static=67,500 lb 30,025 daN
Bearing Load dynam ic=25,000 lb 11,120 daN
(tension) static=67,500 lb 30,025 daN
Max. Overpull
(for re-runs)
Ab so lu te Over pu ll 170,000 lb 75,616 daN
80,000 lb 35,584 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
80 51-65 1,250 15.5
140 96-110 1,060 22.2
200 146-160 850 25.9
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 64/167
4 1/8" 3.87" 7-8 2 STAGE (387-2)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t
l b
.
Stator Configuration 4 1/8" 3 7/8" 7-8, 2 Stage
Bearing Assembly 4 1/8" 105 mmVolume 100-160 gpm 379-606 lpm
Speed 45-90 rpm
Torque 1,550 ft-lb 2,102 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff . Pressure 420 ps i 2,896 kPa
Bit to Bend Length 49" 1,245 mm
O/A Length 187" 4,750 mm
Hole Size 4 3/4" - 5 7/8" 121-149 mm
Top Connect ion 2 3/8 Reg., 2 3/8 IF
Bot tom Connect ion 2 7/8 Reg.
Bearing Load dynamic=50,000 lb 22,240 daN
(compression) static=67,500 lb 30,025 daN
Bearing Load dynamic=25,000 lb 11,120 daN
( tension) static=67,500 lb 30,025 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 170,000 lb 75,616 daN
80,000 lb 35,584 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
100 45-55 1,550 13.3
130 63-73 1,325 15.9
160 78-90 1,050 15.6
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 65/167
75
150
225
300
375
450
525
600
100
200
300
400
500
600
700
800
150
300
450
600
750
900
1,050
1,200
rpm - 100 gpm
rpm - 150 gpm
rpm - 200 gpmMAX.
DIFF.
T O R Q U E
4 3/4" SH 4.75" 1-2 3 STAGE (47S-4)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Stator Configuration 4 3/4" SH 4.75" 1-2, 3 Stage
Bearing Assembly 5.1" 130 mm
Volume 100-200 gpm 379-757 lpm
Speed 172-450 rpm
Torque 440 ft-lb 597 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 380 psi 2,620 kPa
Bit to Bend Length 52" 1,829 mm
O/A Length 225" 5,715 mm
Hole Size 5 7/8" - 7 7/8" 149-200 mm
Top Connection 3 1/2 Reg., 3 1/2 IF
Bottom Connection 3 1/2 Reg.
Bearing Load dynamic=75,400 lb 30,815 daN
(compression) static=60,175 lb 81,045 daN
Bearing Load dynamic=25,125 lb 16,700 daN
(tension) static=20,050 lb 56,045 daN
Max. Overpull
(for re-runs)
Abs olu te Overpu ll 143,000 lb 63,605 daN
56,045 daN20,050 lb
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
100 172-220 440 14.4
150 289-337 440 24.2
200 402-450 440 33.7
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 66/167
40
80
120
160
200
240
280
320
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
150
300
450
600
750
900
1,050
1,200
rpm - 100 gpm
rpm - 175 gpm
rpm - 250 gpm
M A X . D I F F .
T O R Q U E
4 3/4 SH 4.75" 4-5 2.5 STAGE (47S-5)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t l b .
Stator Configuration 4 3/4" SH 4.75" 4-5, 2.5 Stage
Bearing Assembly 5.1" 121 mm
Volume 100-250 gpm 379-757 lpm
Speed 65-315 rpm
Torque 925 ft-lb 488 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 350 psi 2,620 kPa
Bit to Bend Length 52" 1,829 mm
O/A Length 160" 4,064 mm
Hole Size 5 7/8" - 7 7/8" 149-200 mm
Top Connection 3 1/2 Reg., 3 1/2 IF
Bottom Connection 3 1/2 Reg.
Bearing Load dynamic=75,400 lb 30,815 daN
(compression) static=60,175 lb 81,045 daN
Bearing Load dynamic=25,125 lb 16,700 daN
(tension) static=20,050 lb 56,045 daN
Max. Overpull
(for re-runs)
Absolu te Overpull 143,000 lb 63,605 daN
20,050 lb 56,045 daNVolume
(gpm)
Speed(rpm)
Torque(ft-lb)
hp
100 73-91 675 9.4
175 145-164 655 18.1
250 208-236 605 24.0
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 67/167
40
80
120
160
200
240
280
320
100
200
300
400
500
600
700
800
150
300
450
600
750
900
1,050
1,200
rpm - 100 gpm
rpm - 175 gpm
rpm - 250 gpm
MAX.DIF
F.
T O
R Q U E
4 3/4 SH 4.75" 4-5 3.5 STAGE (47S-1)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Stator Configuration 4 3/4" SH 4.75" 4-5, 3.5 Stage
Bearing Assembly 5.1" 121 mm
Volume 100-250 gpm 379-946 lpm
Speed 60-236 rpm
Torque 1,020 ft-lb 1,383 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 490 psi 3,378 kPa
Bit to Bend Length 52" 1,321 mm
O/A Length 204" 5,182 mm
Hole Size 5 7/8" - 7 7/8" 149-200 mm
Top Connection 3 1/2 Reg., 3 1/2 IF
Bottom Connection 3 1/2 Reg.
Bearing Load dynamic=75,400 lb 33,540 daN
(compression) static=60,175 lb 26,765 daN
Bearing Load dynamic=25,125 lb 11,175 daN
(tension) static=20,050 lb 8,920 daN
Max. Overpull
(for re-runs)
Absolute Overpull 143,000 lb 63,605 daN
20,050 lb 8,920 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
100 60-91 1,020 11.7
175 132-164 1,000 25.1
250 204-236 950 36.9
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 68/167
40
80
120
160
200
240
280
320
50
100
150
200
250
300
350
400
150
300
450
600
750
900
1,050
1,200
MAX.DIFF.
rpm - 100 gpm
T O R Q
U E
4.75" SH 5.00" 5-6 2 STAGE (47S-2)
SPE
ED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
rpm - 175 gpm
rpm - 250 gpm
Stator Configuration 4 3/4" SH 5" 5-6, 2 Stage
Bearing Assembly 5.1" 127 mm
Volume 100-250 gpm 379-946 lpm
Speed 81-216 rpm
Torque 850 ft-lb 1,152 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 300 psi 2,068 kPa
Bit to Bend Length 52" 1,321 mm
O/A Length 153" 3,886 mm
Hole Size 5 7/8" - 7 7/8" 149-200 mm
Top Connection 3 1/2 Reg., 3 1/2 IF
Bottom Connection 3 1/2 Reg.
Bearing Load dynamic=75,400 lb 33,540 daN
(compression) static=60,175 lb 26,765 daN
Bearing Load dynamic=25,125 lb 11,175 daN
(tension) static=20,050 lb 8,920 daN
Max. Overpull
(for re-runs)
Absolute Overpull 143,000 lb 63,605 daN
20,050 lb 8,920 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
100 81-85 850 13.1
175 146-151 825 22.9
250 211-216 750 30.1
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 69/167
20
40
60
80
100
120
140
160
75
150
225
300
375
450
525
600
250
500
750
1,000
1,250
1,500
1,750
2,000
rpm - 100 gpm
MA
X.DIFF.
T O R Q U E
4 3/4" SH 4.75" 7-8 2.2 STAGE (47S-3)
SPE
ED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.rpm - 175 gpm
rpm - 250 gpm
Stator Configuration 4 3/4" SH 4.75" 7-8, 2.2 Stage
Bearing Assembly 5.1" 130 mm
Volume 100-250 gpm 379-946 lpm
Speed 45-130 rpm
Torque 1,660 ft-lb 2,251 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 400 psi 2,758 kPa
Bit to Bend Length 52" 1,321 mm
O/A Length 204" 5,182 mm
Hole Size 5 7/8" - 7 7/8" 149-200 mm
Top Connection 3 1/2 Reg., 3 1/2 IF
Bottom Connection 3 1/2 Reg.
Bearing Load dynamic=75,400 lb 33,540 daN
(compression) static=60,175 lb 26,765 daN
Bearing Load dynamic=25,125 lb 11,175 daN
(tension) static=20,050 lb 8,920 daN
Max. Overpull
(for re-runs)
Absolu te Overpull 143,000 lb 63,605 daN
20,050 lb 8,920 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
100 45-53 1,660 14.2
175 90-98 1,450 24.9
250 122-130 1,150 26.7
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 70/167
75
150
225
300
375
450
525
600
100
200
300
400
500
600
700
800
150
300
450
600
750
900
1,050
1,200
rpm - 100 gpm
rpm - 150 gpm
rpm - 200 gpmMAX.DIFF.
T O R Q U E
4 3/4" 4.75" 1-2 3 STAGE (475-1)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb
Stator Configuration 4 3/4" 4.75" 1-2, 3 Stage
Bearing Assembly 4 3/4" 121 m m
Volume 100-200 gpm 379-757 lpm
Speed 172-450 rpm
Torque 440 ft-lb 597 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 380 psi 2,620 kPa
Bit to Bend Length 72" 1,829 m m
O/A Length 250" 6,350 m m
Hole Size 5 7/8" - 7 7/8" 149 - 200 m m
Top Connection 3 1/2 Reg., 3 1/2 IF
Bottom Connection 3 1/2 Reg.
Bearing Load dynam ic=69,275 lb 30,815 daN
(compression) static=182,200 lb 81,045 daN
Bearing Load dynam ic=37,550 lb 16,700 daN
(tension) static=126,000 lb 56,045 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 143,000 lb 63,605 daN
56,045 daN126,000 lb
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
100 172-220 440 14.4
150 289-337 440 24.2
200 402-450 440 33.7
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 71/167
40
80
120
160
200
240
280
320
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
150
300
450
600
750
900
1,050
1,200
rpm - 100 gpm
rpm - 175 gpm
rpm - 250 gpm
M A X .
D I F F .
T O R Q U E
4 3/4 SH 4.75" 4-5 2.5 STAGE (47S-5)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t l b .
Stator Configuration 4 3/4" 4.75" 4-5, 2.5 Stage
Bearing Assembly 4 3/4" 121 mm
Volume 100-250 gpm 379-946 lpm
Speed 65-315 rpm
Torque 925 ft-lb 488 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 350 psi 2,413 kPa
Bit to Bend Length 72" 1,829 mm
O/A Length 185" 6,350 mm
Hole Size 5 7/8" - 7 7/8"" 149-200 mm
Top Connection 3 1/2 Reg., 3 1/2 IF
Bottom Connection 3 1/2 Reg.
Bearing Load dynamic=69,275 lb 30,815 daN
(compression) static=182,200 lb 81,045 daN
Bearing Load dynamic=37,550 lb 16,700 daN
(tension) static=126,000 lb 56,045 daN
Max. Overpull
(for re-runs)
Abso lute Overpull 143,000 lb 63,605 daN
126,000 lb 56,045 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
100 73-91 675 9.4
175 145-164 655 18.1
250 208-236 605 24.0
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 72/167
40
80
120
160
200
240
280
320
100
200
300
400
500
600
700
800
150
300
450
600
750
900
1,050
1,200
rpm - 100 gpm
rpm - 175 gpm
rpm - 250 gpm
MAX.DIFF.
T O
R Q U E
4 3/4 4.75" 4-5 3.5 STAGE (475-3)
SPEED
r pm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Stator Configuration 4 3/4" 4.75" 4-5, 3.5 Stage
Bearing Assembly 4 3/4" 121 mm
Volume 100-250 gpm 379-946 lpm
Speed 60-236 rpm
Torque 1,020 ft-lb 1,383 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 490 psi 3,378 kPa
Bit to Bend Length 72" 1,829 mm
O/A Length 223" 5,664 mm
Hole Size 5 7/8" - 7 7/8" 149-200 mm
Top Connection 3 1/2 Reg., 3 1/2 IF
Bottom Connection 3 1/2 Reg.
Bearing Load dynamic=69,275 lb 30,815 daN
(compression) static=182,200 lb 81,045 daN
Bearing Load dynamic=37,550 lb 16,700 daN
(tension) static=126,000 lb 56,045 daN
Max. Overpull
(for re-runs)
Abs olute Ove rpu ll 143,000 lb 63,605 daN
126,000 lb 56,045 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
100 60-91 1,020 11.7
175 132-164 1,000 25.1
250 204-236 950 36.9
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 73/167
20
40
60
80
100
120
140
160
75
150
225
300
375
450
525
600
250
500
750
1,000
1,250
1,500
1,750
2,000
rpm - 100 gpm
MA
X.DIFF.
T O R Q U E
4 3/4" 4.75" 7-8 2.2 STAGE (475-5)
SPE
ED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.rpm - 175 gpm
rpm - 250 gpm
Stator Configuration 4 3/4" 4.75" 7-8, 2.2 Stage
Bearing Assembly 4 3/4" 121 mm
Volume 100-250 gpm 379-946 lpm
Speed 45-130 rpm
Torque 1,660 ft-lb 2,251 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 400 psi 2,758 kPa
Bit to Bend Length 72" 1,829 mm
O/A Length 196" 4,978 mm
Hole Size 5 7/8" - 7 7/8" 149-200 mm
Top Connection 3 1/2 Reg., 3 1/2 IF
Bottom Connection 3 1/2 Reg.
Bearing Load dynamic=69,275 lb 30,815 daN
(compression) static=182,200 lb 81,045 daN
Bearing Load dynamic=37,550 lb 16,700 daN
(tension) static=126,000 lb 56,045 daN
Max. Overpull
(for re-runs)
Absol ute Ove rpu ll 143,000 lb 63,605 daN
126,000 lb 56,045 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
100 45-53 1,660 14.2
175 90-98 1,450 24.9
250 122-130 1,150 26.7
PERFORMANCE
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 74/167
40
80
120
160
200
240
280
320
200
400
600
800
1,000
1,200
1,400
1,600
400
800
1,200
1,600
2,000
2,400
2,800
3,200
MAX.DIFF.
rpm - 100 gpm
T O R Q U E
5" 4.75" 4-5 6.3 STAGE (500-1)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQU
E
ftlb.
rpm - 175 gpm
rpm - 250 gpm
Stator Configuration 5" S3 4.75" 4-5, 6.3 Stage
Bearing Assembly 5" 127 m m
Volume 100-250 gpm 379-946 lpm
Speed 40-236 rpm
Torque 1,870 ft-lb 2,535 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 887 psi 6,116 kPa
Bit to Bend Length 63" 1,600 m m
O/A Length 298" 7,569 m m
Hole Size 5 7/8" - 7 7/8" 149-200 m m
Top Connect ion 3 1/2 Reg., 3 1/2 IF
Bottom Connection 3 1/2 Reg.
Bear ing Load dynam ic=79,625 lb 35,415 daN
(compression) static=224,950 lb 100,060 daN
Bear ing Load dynam ic=34,625 lb 15,400 daN
(tension) static=91,100 lb 40,520 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 210,000 lb 93,410 daN
91,100 lb 40,520 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
100 40-91 1,870 14.2
175 110-161 1,835 38.4
250 185-236 1,790 63.1
AIR
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 75/167
15
30
45
60
75
90
105
120
75
150
225
300
375
450
525
600
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
rpm - 100 gpm
MAX
.DIFF.
T O R Q U E
5" AIR 4.75" 7-8 2 STAGE (500-3)
SPE
ED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
rpm - 175 gpm
rpm - 250 gpm
GRAPH BASED ON FLUID RESULTS
Stator Configuration 5" S3 4.75" 7-8, 2 Stage
Bearing Assembly 5" 127 mm
Volume 100-250 gpm 379-946 lpm
Speed 21-74 rpm
Torque 2,650 ft-lb 3,593 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 374 psi 2,579 kPa
Bit to Bend Length 63" 1,600 mm
O/A Length 272" 6.909 mm
Hole Size 5 7/8" - 7 7/8" 149-200 m m
Top Connection 3 1/2 Reg., 3 1/2 IF
Bottom Connection 3 1/2 Reg.
Bearing Load dynam ic=79,625 lb 35,415 daN
(compression) static=224,950 lb 100,060 daN
Bearing Load dynam ic=34,625 lb 15,400 daN
(tension) static=91,100 lb 40,520 daN
Max. Overpull
(for re-runs)
Abso lu te Ov erpu ll 210,000 lb 93,410 daN
91,100 lb 40,520 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
100 21-29 2,650 10.6
175 43-51 2,350 19.2
250 66-74 1,680 21.1
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 76/167
20
40
60
80
100
120
140
160
60
120
180
240
300
360
420
480
250
500
750
1,000
1,250
1,500
1,750
2,000
rpm - 100 gpm
MAX.DIFF
.
T O R Q U E
5" 4.75" 7-8 2.2 STAGE (500-4)
SPE
ED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
rpm - 175 gpm
rpm - 250 gpm
Stator Configuration 5" S3 4.75" 7-8, 2.2 Stage
Bearing Assembly 5" 127 m m
Volume 100-250 gpm 379-946 lpm
Speed 45-130 rpm
Torque 1,660 ft-lb 2,251 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 400 psi 2,758 kPa
Bit to Bend Length 63" 1,600 m m
O/A Length 214" 5,436 m m
Hole Size 5 7/8" - 7 7/8" 149-200 m m
Top Connect ion 3 1/2 Reg., 3 1/2 IF
Bottom Connect ion 3 1/2 Reg.
Bear ing Load dynam ic=79,625 lb 35,415 daN
(compression) static=224,950 lb 100,060 daN
Bear ing Load dynam ic=34,625 lb 15,400 daN
(tension) static=91,100 lb 40,520 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 210,000 lb 93,410 daN
91,100 lb 40,520 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
100 45-53 1,660 14.2
175 90-98 1,450 24.9
250 122-130 1,150 26.7
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 77/167
20
40
60
80
100
120
140
160
60
120
180
240
300
360
420
480
250
500
750
1,000
1,250
1,500
1,750
2,000
rpm - 100 gpm
MAX.DIFF
.
T O R Q U E
5" 4.75" 7-8 2.2 STAGE (500-4)
SPE
ED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
rpm - 175 gpm
rpm - 250 gpm
Stator Configuration 5" 4.75" 7-8, 2.2 Stage
Bearing Assembly 5" 127 m m
Volume 100-250 gpm 379-946 lpm
Speed 45-130 rpm
Torque 1,660 ft-lb 2,251 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 400 psi 2,758 kPa
Bit to Bend Length 69" 1,753 m m
O/A Length 220" 5,588 m m
Hole Size 5 7/8" - 7 7/8" 149-200 m m
Top Connect ion 3 1/2 Reg., 3 1/2 IF
Bottom Connect ion 3 1/2 Reg.
Bear ing Load dynam ic=79,625 lb 35,415 daN
(compression) static=224,950 lb 100,060 daN
Bear ing Load dynam ic=34,625 lb 15,400 daN
(tension) static=91,100 lb 40,520 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 210,000 lb 93,410 daN
91,100 lb 40,520 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
100 45-53 1,660 14.2
175 90-98 1,450 24.9
250 122-130 1,150 26.7
PERFORMANCE
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 78/167
20
40
60
80
100
120
140
160
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
500
1000
1500
2000
2500
3000
3500
4000
M A X . D I F F .
rpm - 150 gpm
T O R Q
U E
5" PERFORMANCE 4-3/4" 7-8 3.8 STAGE (500-6)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t l b .
rpm - 200 gpm
rpm - 250 gpm
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
150 62-78 2,500 29.5
200 88-104 2,300 38.5
250 112-128 2,050 43.7
Stator Configuration 5" S3 4.75" 7-8, 3.8 Stage
Bearing Assembly 5" 127 mm
Volume 150-250 gpm 568-946 lpm
Speed 62-128 rpm
Torque 2,500 ft-lb 3,390 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 615 psi 4,240 kPa
Bit to Bend Length 63" 1,600 mm
O/A Length 269" 6,833 mm
Hole Size 5 7/8" - 7 7/8" 149-200 mm
Top Connection 3 1/2 Reg., 3 1/2 IF
Bottom Connection 3 1/2 Reg.
Bearing Load dynamic=79,625 lb 35,415 daN
(compression) static=224,950 lb 100,060 daN
Bearing Load dynamic=34,625 lb 15,400 daN
(tension) static=91,100 lb 40,520 daN
Max. Overpull
(for re-runs)
Abso lu te Overpu ll 210,000 lb 93,410 daN
91,100 lb 40,520 daN
PERFORMANCE
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 79/167
40
80
120
160
200
240
280
320
100
200
300
400
500
600
700
800
300
600
900
1,200
1,500
1,800
2,100
2,400
MAX
.DIFF.
rpm - 100 gpm
T O R Q U E
5" PERFORMANCE 5" 5-6 4 STAGE (500-2)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
rpm - 175 gpm
rpm - 250 gpm
Stator Configuration 5" S3 5" 5-6, 4 Stage
Bearing Assembly 5" 127 mm
Volume 100-250 gpm 379-946 lpm
Speed 67-217 rpm
Torque 1,700 ft-lb 2,305 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 646 psi 4,454 kPa
Bit to Bend Length 63" 1,600 mm
O/A Length 232" 5,893 mm
Hole Size 5 7/8" - 7 7/8" 149-200 mm
Top Connection 3 1/2 Reg., 3 1/2 IF
Bottom Connection 3 1/2 Reg.
Bearing Load dynamic=79,625 lb 35,415 daN
(compression) static=224,950 lb 100,060 daN
Bearing Load dynamic=34,625 lb 15,400 daN
(tension) static=91,100 lb 40,520 daN
Max. Overpull
(for re-runs)
Abso lu te Overpu ll210,000 lb 93,410 daN
91,100 lb 40,520 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
100 67-84 1,700 21.7
175 133-150 1,640 41.5
250 200-217 1,550 59.0
PERFORMANCE
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 80/167
50
100
150
200
250
300
350
400
150
300
450
600
750
900
1, 0
50
1,200
400
800
1,200
1,600
2,000
2,400
2,800
3,200
MAX.DIFF.
rpm - 150 gpm
T O R Q
U E
5" PERFORMANCE 5" 6-7 6 STAGE (500-5)
SPEED
r pm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
rpm - 250 gpm
rpm - 350 gpm
Stator Configuration 5" S3 5" 6-7, 6 Stage
Bearing Assembly 5" 127 mm
Volume 150-350 gpm 568-1,325 lpm
Speed 96-300 rpm
Torque 2,750 ft-lb 3,729 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 1,044 psi 7,198 kPa
Bit to Bend Length 63" 1,600 mm
O/A Length 276" 7,010 mm
Hole Size 5 7/8" - 7 7/8" 149-200 mm
Top Connection 3 1/2 Reg., 3 1/2 IF
Bottom Connection 3 1/2 Reg.
Bearing Load dynamic=79,625 lb 35,415 daN
(compression) static=224,950 lb 100,060 daN
Bearing Load dynamic=34,625 lb 15,400 daN
(tension) static=91,100 lb 40,520 daN
Max. Overpull
(for re-runs)
Abso lu te Overpu ll210,000 lb 93,410 daN
91,100 lb 40,520 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
150 96-130 2,750 50.3
250 181-215 2,550 87.9
350 266-300 2,350 119.0
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 81/167
30
60
90
120
150
180
210
240
75
150
225
300
375
450
525
600
400
800
1,200
1,600
2,000
2,400
2,800
3,200
MAX.DIFF.
rpm - 200 gpm
T O R Q U E
5 1/2" 5.50" 7-8 3 STAGE (550-1)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
rpm - 275 gpm
rpm - 350 gpm
Stator Configuration 5 1/2" 5.50" 7-8, 3 Stage
Bearing Assembly 5 1/2" 140 mm
Volume 200-350 gpm 757-1,325 lpm
Speed 70-160
Torque 2,622 ft-lb 3,555 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 450 psi 3,103 kPa
Bit to Bend Length 85" 2,159 m m
O/A Length 251" 6,375 m m
Hole Size 6 3/4" - 8 3/4" 171-222 m m
Top Connection 4 1/2 Reg., 3 1/2 IF
Bottom Connection 4 1/2 Reg.
Bearing Load dynam ic=84,125 lb 37,420 daN
(compression) static=247,450 lb 110,065 daN
Bearing Load dynam ic=42,050 lb 18,705 daN
(tension) static=123,700 lb 55,020 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 214,000 lb 95,190 daN
123,700 lb 55,020 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
200 70-92 2,622 34.9
275 98-120 2,400 44.8
350 135-160 2,050 52.7
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 82/167
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 83/167
75
150
225
300
375
450
525
600
100
200
300
400
500
600
700
800
200
400
600
800
1,000
1,200
1,400
1,600
rpm - 200 gpm
rpm - 350 gpm
rpm - 500 gpm
MAX.D
IFF.
T O R Q U E
6 1/2" 6.50" 1-2 4 STAGE (650-1)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Stator Configuration 6 1/2" 6.50" 1-2, 4 Stage
Bearing Assembly 6 1/2" 165 mm
Volume 200-500 gpm 757-1,893 lpm
Speed 182-522 rpm
Torque 1,200 ft-lb 1,627 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 474 psi 3,268 kPa
Bit to Bend Length 88" 2,235 mm
O/A Length 324" 8,230 mm
Hole Size 7 7/8" - 9 7/8" 200-251 mm
Top Connection 4 1/2 Reg., 4 1/2 H90, 5 H90
Bottom Connection 4 1/2 Reg.
Bearing Load dynam ic=154,750 lb 68,835 daN
(compression) static=467,900 lb 208,120 daN
Bearing Load dynam ic=77,375 lb 34,415 daN
(tension) static=234,000 lb 104,085 daN
Max. Overpull
(for re-runs)
Ab so lu te Overpu ll 275,000 lb 122,320 daN
234,000 lb 104,085 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
200 182-207 1,200 41.6
350 337-362 1,200 77.0
500 497-522 1,200 113.6
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 84/167
50
100
150
200
250
300
350
400
100
200
300
400
500
600
700
800
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
MAX.DIFF.
rpm - 300 gpm
rpm - 450 gpm
rpm - 600 gpm
T O R Q
U E
6 1/2" 6.50" 4-5 4.8 STAGE (650-2)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb
Stator Configuration 6 1/2" 6.50" 4-5, 4.8 Stage
Bearing Assembly 6 1/2" 165 mm
Volume 300-600 gpm 1,136-2,271 lpm
Speed 115-292 rpm
Torque 2,710 ft-lb 3,674 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 674 psi 4,647 kPa
Bit to Bend Length 88" 2,235 mm
O/A Length 292" 7,417 mm
Hole Size 7 7/8" - 9 7/8" 200-251 mm
Top Connection 4 1/2 Reg., 4 1/2 H90, 5 H90
Bottom Connection 4 1/2 Reg.
Bearing Load dynamic=154,750 lb 68,825 daN
(compression) static=467,900 lb 208,120 daN
Bearing Load dynamic=77,375 lb 34,415 daN
(tension) static=234,000 lb 104,085 daN
Max. Overpull
(for re-runs)
Abs olu te O ver pul l275,000 lb 122,320 daN
234,000 lb 104,085 daN
Volume( g p m )
S p eed(rpm)
Torque(ft-lb)
h p
300 115-147 2,710 59.4
450 185-217 2,625 92.5
600 260-292 2,550 126.3
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 85/167
30
60
90
120
150
180
210
240
100
200
300
400
500
600
700
800
750
1,500
2,250
3,000
3,750
4,500
5,250
6,000
MAX.DIFF.
rpm - 300 gpm
T O
R Q U E
rpm - 450 gpm
rpm - 600 gpm
6 1/2 6.50" 7-8 3 STAGE (650-3)
SP
EED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Stator Configuration 6 1/2" 6.50" 7-8, 3 Stage
Bearing Assembly 6 1/2" 165 mm
Volume 300-600 gpm 1,136-2,271 lpm
Speed 63-163 rpm
Torque 4,200 ft-lb 5,694 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 562 psi 3,875 kPa
Bit to Bend Length 88" 2,235 m m
O/A Length 267" 6,782 m m
Hole Size 7 7/8" - 9 7/8" 200-251 m m
Top Connection 4 1/2 Reg., 4 1/2 H90, 5 H90
Bottom Connection 4 1/2 Reg.
Bearing Load dynam ic=154,750 lb 68,835 daN
(compression) static=467,900 lb 208,120 daN
Bearing Load dynam ic=77,375 lb 34,415 daN
(tension) static=234,000 lb 104,085 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 275,000 lb 122,320 daN
234,000 lb 104,085 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
300 63-80 4,200 50.4
450 105-122 3,770 75.4
600 146-163 3,300 91.8
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 86/167
25
50
75
100
125
150
175
200
50
100
150
200
250
300
350
400
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
MAX
.DIFF.
rpm - 200 gpm
rpm - 300 gpm
rpm - 400 gpm
T O R Q U E
6 1/2" 6.50" 8-9 2 STAGE (650-4)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TOR
QUE
ftlb.
Stator Configuration 6 1/2" 6.50" 8-9, 2 Stage
Bearing Assembly 6 1/2" 165 mm
Volume 200-400 gpm 757-1,514 lpm
Speed 40-104 rpm
Torque 2,500 ft-lb 3,390 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 335 psi 2,310 kPa
Bit to Bend Length 88" 2,235 m m
O/A Length 225" 5,715 m m
Hole Size 7 7/8" - 9 7/8" 200-251 m m
Top Connection 4 1/2 Reg., 4 1/2 H90, 5 H90
Bottom Connection 4 1/2 Reg.
Bearing Load dynam ic=154,750 lb 68,835 daN
(compression) static=467,900 lb 208,120 daN
Bearing Load dynam ic=77,375 lb 34,415 daN
(tension) static=234,000 lb 104,085 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 275,000 lb 122,320 daN
234,000 lb 104,085 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
200 40-52 2,500 19.0
300 65-78 2,300 28.5
400 92-104 2,000 35.0
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 87/167
25
50
75
100
125
150
175
200
75
150
225
300
375
450
525
700
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
MAX.DIFF.
T O
R Q U E
6 1/2" 6.50" 8-9 3 STAGE (650-5)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
f tlb.
rpm - 200 gpm
rpm - 300 gpm
rpm - 400 gpm
Stator Configuration 6 1/2" 6.50" 8-9, 3 Stage
Bearing Assembly 6 1/2" 165 mm
Volume 200-400 gpm 757-1,514 lpm
Speed 40-105 rpm
Torque 3,740 ft-lb 5,071 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 500 psi 3,447 kPa
Bit to Bend Length 88" 2,235 mm
O/A Length 264" 6,706 mm
Hole Size 7 7/8" - 9 7/8" 200-251 mm
Top Connection 4 1/2 Reg., 4 1/2 H90, 5 H90
Bottom Connection 4 1/2 Reg.
Bearing Load dynamic=154,750 lb 68,835 daN
(compression) static=467,900 lb 208,120 daN
Bearing Load dynamic=77,375 lb 34,415 daN
(tension) static=234,000 lb 104,085 daN
Max. Overpull
(for re-runs)
Absolut e Overpu ll 275,000 lb 122,320 daN
234,000 lb 104,085 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
200 40-53 3,740 28.5
300 62-78 3,500 41.3
400 90-105 3,150 54.0
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 88/167
75
150
225
300
375
450
525
600
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
200
400
600
800
1,000
1,200
1,400
1,600
rpm - 200 gpm
rpm - 350 gpm
rpm - 500 gpm
M A X . D I F F .
T
O R Q U E
6 1/2" S3 6.50" 1-2 4 STAGE (65S-1)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t l b .
Stator Configuration 6 1/2" S3 6.50" 1-2, 4 Stage
Bearing Assembly 6 1/2" 165 mm
Volume 200-500 gpm 757-1,893 lpm
Speed 182-522 rpm
Torque 1,200 ft-lb 1,627 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 474 psi 3,268 kPa
Bit to Bend Length 71" 1,803 mm
O/A Length 300" 7,620 mm
Hole Size 7 7/8" - 9 7/8" 200-251 mm
Top Connection 4 1/2 Reg., 4 1/2 H90, 5 H90
Bottom Connection 4 1/2 Reg.
Bearing Load dynamic=130,000 lb 57,825 daN
(compression) static=400,500 lb 178,140 daN
Bearing Load dynamic=65,000 lb 28,910 daN
(tension) static=200,250 lb 89,070 daN
Max. Overpull
(for re-runs)
Absolut e Ov erpu ll 289,000 lb 128,550 daN
200,250 lb 89,070 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
200 182-207 1,200 41.6
350 337-362 1,200 77.0
500 497-522 1,200 113.6
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 89/167
50
100
150
200
250
300
350
400
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
M A X
. D I F F .
rpm - 300 gpm
rpm - 450 gpm
rpm - 600 gpm
T O R Q
U E
6 1/2"/6 3/4" S3 6.50"/6.75" 4-5 4.8 STAGE (65S-2)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t l b .
Stator Configuration 6 1/2"-6 3/4" S3 6.5"-6.75" 4-5, 4.8 Stage
Bearing Assembly 6 1/2" 165 mm
Volume 300-600 gpm 1,136-2,271 lpm
Speed 115-292 rpm
Torque 2,710 ft-lb 3,674 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 674 psi 4,647 kPa
Bit to Bend Length 71" 1,803 mm
O/A Length 268" 6,807 mm
Hole Size 8 3/4" - 9 7/8" 222-251 mm
Top Connection 4 1/2 Reg., 4 1/2 H90, 5 H90
Bottom Connection 4 1/2 Reg.
Bearing Load dynamic=130,000 lb 57.825 daN
(compression) static=400,500 lb 178,140 daN
Bearing Load dynamic=65,000 lb 28,910 daN
(tension) static=200,250 lb 89,070 daN
Max. Overpull
(for re-runs)
Absolute Overpull 289,000 lb 128,550 daN
200,250 lb 89,070 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
300 115-147 2,710 59.4
450 185-217 2,625 92.5
600 260-292 2,550 126.3
PERFORMANCE
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 90/167
30
60
90
120
150
180
210
240
1 2 5
2 5 0
3 7 5
5 0 0
6 2 5
7 5 0
8 7 5
1 , 0 0 0
1,500
3,000
4,500
6,000
7,500
9,000
10,500
12,000
M A X . D I F F .
rpm - 300 gpm
rpm - 450 gpm
rpm - 600 gpm
T O R Q U E
6 1/2"/6 3/4" S3 6.50"/6.75" 6-7 5 STAGE (65S-8)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t l b .
V o l u m e( g p m )
S p e e d( r p m )
T o r q u e(f t - lb)
h p
3 0 0 5 6 - 9 6 6 , 0 0 0 6 4 .0
4 5 0 1 0 0 - 1 3 0 5 , 6 0 0 1 0 6 .7
6 0 0 1 4 3 - 1 7 3 5 , 2 0 0 1 4 1 .6
Stator Configuration
Bearing Assembly 6 1/2" 165 mm
Volume 300-600 gpm ,136-2,271 lpm
Speed 56-173 rpm
Torque 6,000 ft-lb 8,135 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 775 psi 5,343 kPa
Bit to Bend Length 71" 1,803 m m
O/A Length 314" 7,976 m m
Hole Size 8 3/4" - 9 7/8" 222-251 m m
Top Connection 4 1/2 Reg., 4 1/2 H90, 5 H90
Bottom Connection 4 1/2 Reg.
Bearing Load dynam ic=130,000 lb 68,825 daN
(compression) static=400,500 lb 208,120 daN
Bearing Load dynam ic=65,000 lb 34,415 daN
(tension) static=200,250 lb 104,085 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov erpu ll 289,000 lb 122,320 daN
200,250 lb 104,085 daN
6 1/2"-6 3/4" S3 6.75" 6-7, 5 Stage
PERFORMANCE / AIR
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 91/167
15
30
45
60
75
90
105
120
7 5
1 5 0
2 2 5
3 0 0
3 7 5
4 5 0
5 2 5
7 0 0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
M A X
. D I F F .
rpm - 200 gpm
T O R Q
U E
6 1/2"/6 3/4"S3 6.5"/6.75" 7-8 2 STAGE (65S-3)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t l b .
rpm - 350 gpm
rpm - 500 gpm
GRAPH BASED ON FLUID RESULTS
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
200 23-31 5,300 23.2
350 45-53 4,600 39.4
500 68-76 3,750 48.6
Stator Configuration 6 1/2"-6 3/4" S3 6.5"-6.75" 7-8, 2 Stage
Bearing Assembly 6 1/2" 165 mm
Volume 200-500 gpm 757-1,893 lpm
Speed 23-76 rpm
Torque 5,300 ft-lb 7,186 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 374 psi 2,579 kPa
Bit to Bend Length 71" 1,803 mm
O/A Length 268" 6,807 mm
Hole Size 8 3/4" - 9 7/8" 222-251 mm
Top Connection 4 1/2 Reg., 4 1/2 H90, 5 H90
Bottom Connection 4 1/2 Reg.
Bearing Load dynam ic=130,000 lb 57.825 daN
(compression) static=400,500 lb 178,140 daN
Bearing Load dynamic=65,000 lb 28,910 daN
(tension) static=200,250 lb 89,070 daN
Max. Overpull
(for re-runs)
Abso lu te Overpu ll 289,000 lb 128,550 daN
200,250 lb 89,070 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 92/167
30
60
90
120
150
180
210
240
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
750
1,500
2,250
3,000
3,750
4,500
5,250
6,000
M A X
. D I F F .
rpm - 300 gpm
T O
R Q U E
rpm - 450 gpm
rpm - 600 gpm
6 1/2"/6 3/4" S3 6.50"/6.75" 7-8 3 STAGE (65S-4)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t l b .
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
300 63-80 4,200 50.4
450 105-122 3,770 75.4
600 146-163 3,300 91.8
Stator Configuration
Bearing Assembly 6 1/2" 171 mm
Volume 300-600 gpm ,136-2,271 lpm
Speed 63-163 rpm
Torque 4,200 ft-lb 5,694 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 562 psi 3,875 kPa
Bit to Bend Length 71" 1,803 mm
O/A Length 245" 6,223 mm
Hole Size 8 3/4" - 9 7/8" 222-251 mm
Top Connection 4 1/2 Reg., 4 1/2 H90, 5 H90
Bottom Connection 4 1/2 Reg.
Bearing Load dynam ic=130,000 lb 57,825 daN
(compression) static=400,500 lb 178,140 daN
Bearing Load dynamic=65,000 lb 28,910 daN
(tension) static=200,250 lb 89,070 daN
Max. Overpull
(for re-runs)
Abso lu te Overpu ll 289,000 lb 128,550 daN
200,250 lb 89,070 daN
6 1/2"-6 3/4" S3 6.5"-6.75" 7-8 3 Stage
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 93/167
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 94/167
PERFORMANCE
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 95/167
50
100
150
200
250
300
350
400
1 5 0
3 0 0
4 5 0
6 0 0
7 5 0
9 0 0
1 , 0 5 0
1 , 2 0 0
750
1,500
2,250
3,000
3,750
4,500
5,250
6,000
M A X . D I F .
rpm - 300 gpm
T O R S I O N
6 1/2"/6 3/4"S3 6.75" 4-5 7 STAGE (675-6)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E f t - l b .
rpm - 450 gpm
rpm - 600 gpm
Stator Configuration 6 1/2"-6 3/4" S3 6.75" 4-5, 7 Stage
Bearing Assembly 6 3/4" 171 mm
Volume 300-600 gpm ,136-2,271 lpm
Speed 109-295 rpm
Torque 4,100 ft-lb 5,560 N*m
Max. Pressure Drop 1,500 psi 10,343 kPa
Max. Diff. Pressure 994 psi 6,854 kPa
Bit to Bend Length 71" 2,235 m m
O/A Length 329" 8,357 m m
Hole Size 7 7/8" - 9 7/8" 200-251 m m
Top Connection 4 1/2 Reg., 4 1/2 H90, 5 H90
Bottom Connection 4 1/2 Reg.
Bearing Load dynam ic=154,750 lb 68,825 daN
(compression) static=467,900 lb 208,120 daN
Bearing Load dynam ic=77,375 lb 34,415 daN
(tension) static=234,000 lb 104,085 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov erpu ll 275,000 lb 122,320 daN
234,000 lb 104,085 daN
V o l u m e( g p m )
S p e e d( r p m )
T o r q u e(f t - lb)
h p
3 0 0 1 0 9 - 1 5 0 4 , 1 0 0 8 5 .1
4 5 0 1 7 9 - 2 2 1 4 , 0 5 0 1 3 8 .0
6 0 0 2 5 4 - 2 9 5 3 , 9 0 0 1 8 8 .6
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 96/167
50
100
150
200
250
300
350
400
100
200
300
400
500
600
700
800
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
MAX
.DIFF.
rpm - 300 gpm
rpm - 450 gpm
rpm - 600 gpm
T O R Q U E
6 3/4" 6.75" 4-5 4.8 STAGE (675-1)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Stator Configuration 6 3/4" 6.75" 4-5, 4.8 Stage
Bearing Assembly 6 3/4" 171 mm
Volume 300-600 gpm 1,136-2,271 lpm
Speed 115-292 rpm
Torque 2,710 ft-lb 3,674 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 674 psi 4,647 kPa
Bit to Bend Length 88" 2,235 mm
O/A Length 297" 7,544 mm
Hole Size 8 3/4" - 9 7/8" 222-251 mm
Top Connection 4 1/2 Reg., 4 1/2 H90, 5 H90
Bottom Connection 4 1/2 Reg.
Bearing Load dynamic=154,750 lb 68,835 daN
(compression) static=467,900 lb 208,120 daN
Bearing Load dynamic=77,375 lb 34,415 daN
(tension) static=234,000 lb 104,085 daN
Max. Overpull
(for re-runs)
Abs olu te O verpul l 275,000 lb 122,320 daN
234,000 lb 104,085 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
300 115-147 2,710 59.4
450 185-217 2,625 92.5
600 260-292 2,550 126.3
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 97/167
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 98/167
30
60
90
120
150
180
210
240
100
200
300
400
500
600
700
800
750
1,500
2,250
3,000
3,750
4,500
5,250
6,000
MA
X.DIFF.
rpm - 300 gpm
T O
R Q U E
rpm - 450 gpm
rpm - 600 gpm
6 3/4" 6.75" 7-8 3 STAGE (675-5)
SP
EED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
300 63-80 4,200 50.4
450 105-122 3,770 75.4
600 146-163 3,300 91.8
Stator Configuration 6 3/4" 6.75" 7-8, 3 Stage
Bearing Assembly 6 3/4" 171 m m
Volume 300-600 gpm 1,136-2,271 lpm
Speed 63-163 rpm
Torque 4,200 ft-lb 5,695 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 562 psi 3,875 kPa
Bit to Bend Length 88" 2,235 m m
O/A Length 263" 6,680 m m
Hole Size 8 3/4" - 9 7/8" 222-251 m m
Top Connection 4 1/2 Reg., 4 1/2 H90, 5 H90
Bottom Connection 4 1/2 Reg.
Bearing Load dynam ic=154,750 lb 68,835 daN
(compression) static=467,900 lb 208,120 daN
Bearing Load dynam ic=77,375 lb 34,415 daN
(tension) static=234,000 lb 104,085 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 275,000 lb 122,320 daN
234,000 lb 104,085 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 99/167
40
80
120
160
200
240
280
320
100
200
300
400
500
600
700
800
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
MA
X.DIFF.
rpm - 400 gpm
T O R
Q U E
7 1/2" 7.50" 4-5 3.6 STAGE (750-1)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQU
E
ftlb.
rpm - 700 gpm
rpm - 900 gpm
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
400 74-98 4,000 56.4
700 145-168 3,750 103.6
900 195-219 3,600 133.7
Stator Configuration 7 1/2" 7.50" 4-5, 3.6 Stage
Bearing Assembly 7 1/2" 191 mm
Volume 400-900 gpm 1,514-3,407 lpm
Speed 72-225 rpm
Torque 4,000 ft-lb 5,423 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 497 psi 3,585 kPa
Bit to Bend Length 94" 2,388 mm
O/A Length 300" 7,620 mm
Hole Size 9 5/8" - 12 1/4" 245-311 mm
Top Connection 5 1/2 Reg., 6 5/8 Reg.
Bottom Connection 6 5/8 Reg.
Bearing Load dynamic=200,200 lb 89,050 daN
(compression) static=620,800 lb 276,130 daN
Bearing Load dynamic=100,100 lb 44,525 daN
(tension) static=310,400 lb 138,065 daN
Max. Overpull
(for re-runs)
Abs olu te Ove rpu ll 310,400 lb 138,065 daN
310,400 lb 138,065 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 100/167
25
50
75
100
125
150
175
200
100
200
300
400
500
600
700
800
1,500
3,000
4,500
6,000
7,500
9,000
10,500
12,000
MA
X.DIFF.
rpm - 300 gpm
T O R Q U E
7.50" 7.50" 7-8 3 STAGE (750-2)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQU
E
ftlb.
rpm - 600 gpm
rpm - 900 gpm
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
300 31-47 7,600 44.9
600 79-95 6,600 99.3
900 128-144 4,900 119.5
Stator Configuration 7 1/2" 7.50" 7-8, 3 Stage
Bearing Assembly 7 1/2" 191 mm
Volume 300-900 gpm 1,136-3,407 lpm
Speed 31-144 rpm
Torque 7,600 ft-lb 10,304 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 562 psi 3,875 kPa
Bit to Bend Length 94" 2,388 m m
O/A Length 308" 7,823 m m
Hole Size 9 5/8" - 12 1/4" 245-311 m m
Top Connection 5 1/2 Reg., 6 5/8 Reg.Bottom Connection 6 5/8 Reg.
Bearing Load dynam ic=200,200 lb 89,050 daN
(compression) static=620,800 lb 276,130 daN
Bearing Load dynam ic=100,100 lb 44,525 daN
(tension) static=310,400 lb 138,065 daN
Max. Overpull
(for re-runs)
Ab so lu te Over pu ll 310,400 lb 138,065 daN
310,400 lb 138,065 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 101/167
100
200
300
400
500
600
700
800
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
400
800
1,200
1,600
2,000
2,400
2,800
3,200
M A
X . D I F F .
rpm - 300 gpm
T O R
Q U E
8" S3 8.00" 1-2 4 STAGE (80S-1)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t l b .
rpm - 450 gpm
rpm - 600 gpm
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
300 160-210 1,650 50.3
450 265-320 1,650 83.3
600 375-420 1,650 117.9
Stator Configuration 8" S3 8" 1-2, 4 Stage
Bearing Assem b ly 8" 203 m m
Volume 300-600 gpm 1,136-2,271 lpm
Speed 160-420 rpm
Torque 1,650 ft-lb 2,237 N *m
Max. Pressure Drop 1,500 ps i 10,342 kPa
Max. Diff. Pressure 495 ps i 3 ,413 kPa
Bit to Bend L ength 81" 2,057 m m
O/A Length 313" 7,950 m m
Hole Size 9 5/8" - 12 1/4" 245-311 m m
Top Connect ion 5 1/2 Reg., 6 5 /8 Reg.Bottom Connect ion 6 5/8 Reg.
Bear ing Load dynam ic=215,950 lb 96,055 daN
(compression) static=670,375 lb 298,185 daN
Bear ing Load dynam ic=107,975 lb 48,030 daN
( tension) static=335,200 lb 149,100 daN
Max. Overpul l
(for re-runs)
Abso lu te Overp ul l 406,000 lb 180,590 daN
335,200 lb 149,100 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 102/167
40
80
120
160
200
240
280
320
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
M A
X . D I F F .
rpm - 400 gpm
T O R
Q U E
8" S3 8.00" 4-5 3.6 STAGE (80S-2)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t l b .
rpm - 700 gpm
rpm - 900 gpm
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
400 74-98 4,000 56.4
700 145-168 3,750 103.6
900 195-219 3,600 133.7
Stator Configuration 8" S3 8" 4-5, 3.6 Stage
Bearing Assembly 8" 203 m m
Volume 400-900 gpm 1,514-3,407 lpm
Speed 74-219 rpm
Torque 4,000 ft-lb 5,423 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 497 psi 3,427 kPa
Bit to Bend Length 81" 2,057 m m
O/A Length 294" 7,468 m m
Hole Size 9 5/8" - 12 1/4" 245-311 m m
Top Connection 5 1/2 Reg., 6 5/8 Reg.Bottom Connec t ion 6 5/8 Reg.
Bear ing Load dynam ic=215,950 lb 96,055 daN
(compression) static=670,375 lb 298,185 daN
Bear ing Load dynam ic=107,975 lb 48,030 daN
(tension) static=335,200 lb 149,100 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 406,000 lb 180,590 daN
335,200 lb 149,100 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 103/167
25
50
75
100
125
150
175
200
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
1,500
3,000
4,500
6,000
7,500
9,000
10,500
12,000
M A
X . D I F F .
rpm - 300 gpm
T O
R Q U E
8" S3 8.00" 7-8 3 STAGE (80S-3)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t l b .
rpm - 600 gpm
rpm - 900 gpm
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
300 30-47 7,600 43.4
600 79-95 6,600 99.3
900 128-143 4,900 119.5
Stator Configuration 8" S3 8" 7-8, 3 Stage
Bearing Assem b ly 8" 203 m m
Volume 300-900 gpm 1,136-3,407 lpm
Speed 30-143 rpm
Torque 7,600 ft-lb 10,304 N *m
Max. Pressure Drop 1,500 ps i 10,342 kPa
Max. Diff. Pressure 562 ps i 3 ,875 kPa
Bit to Bend L ength 81" 2,057 m m
O/A Length 294" 7,468 m m
Hole Size 9 5/8" - 12 1/4" 245-311 m m
Top Connect ion 5 1/2 Reg., 6 5 /8 Reg.Bottom Connect ion 6 5/8 Reg.
Bear ing Load dynam ic=215,950 lb 96,055 daN
(compression) static=670,375 lb 298,185 daN
Bear ing Load dynam ic=107,975 lb 48,030 daN
( tension) static=335,200 lb 149,100 daN
Max. Overpul l
(for re-runs)
Abso lu te Overp ul l 406,000 lb 180,590 daN
335,200 lb 149,100 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 104/167
30
60
90
120
150
180
210
240
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
M A X . D I F F .
rpm - 400 gpm
rpm - 650 gpm
rpm - 900 gpm
T O R Q U E
8" S3 8.00" 8-9 4 STAGE (80S-4)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t l b .
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
400 90-115 6,025 103.3
650 145-170 5,570 153.8
900 199-225 4,790 181.6
Stator Configuration 8" S3 8" 8-9, 4 Stage
Bearing Assem b ly 8" 203 m m
Volume 400-900 gpm 1,514-3,407 lpm
Speed 90-225 rpm
Torque 6,025 ft-lb 8,169 N *m
Max. Pressure Drop 1,500 ps i 10,342 kPa
Max. Diff. Pressure 670 ps i 4 ,620 kPa
Bit to Bend L ength 81" 2,057 m m
O/A Length 296" 7,518 m m
Hole Size 9 5/8" - 12 1/4" 245-311 m m
Top Connect ion 5 1/2 Reg., 6 5 /8 Reg.Bottom Connect ion 6 5/8 Reg.
Bear ing Load dynam ic=215,950 lb 96,055 daN
(compression) static=670,375 lb 298,185daN
Bear ing Load dynam ic=107,975 lb 48,030 daN
( tension) static=335,200 lb 149,100 daN
Max. Overpul l
(for re-runs)
Abso lu te Overp ul l 406,000 lb 180,590 daN
335,200 lb 149,100 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 105/167
25
50
75
100
125
150
175
200
100
200
300
400
500
600
700
800
1,500
3,000
4,500
6,000
7,500
9,000
10,500
12,000
MAX.DIFF.
rpm - 300 gpm
T O R Q U E
8" 8.00" 6-7 4 STAGE (8S3-1)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
rpm - 600 gpm
rpm - 900 gpm
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
300 32-51 8,500 51.8
600 83-102 7,630 120.6
900 134-155 6,560 167.4
Stator Configuration 8" S3 8.00" 6-7, 4 Stage
Bearing Assembly 8 " 203 mm
Volume 300-900 gpm 1,136-3,407 lpm
Speed 32-155 rpm
Torque 8,500 ft-lb 11,524 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 620 psi 4,275 kPa
Bit to Bend Length 81" 2,057 mm
O/A Length 332" 8433 mm
Hole Size 9 5/8" - 12 1/4" 244-311 mm
Top Connect ion 5 1/2 Reg., - 6 5/8 Reg.
Bottom Conenct ion 6 5/8 Reg.
Bearing Load dynamic=235,900 lb 104,930 daN
(compression) static=253,525 lb 112,770 daN
Bearing Load dynamic=94,350 lb 41,970 daN
(tension) static=101,400 lb 45,105 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 580,000 lb 257,985 daN
101,400 lb 45,105 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 106/167
15
30
45
60
75
90
105
120
5 0
1 0 0
1 5 0
2 0 0
2 5 0
3 0 0
3 5 0
4 0 0
1,250
2,500
3,750
5,000
6,250
7,500
8,750
9,000
M A
X . D I F F .
rpm - 400 gpm
T O R Q U E
8" S3 AIR 8.00" 7-8 2 STG (80S-5)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t l b .
rpm - 550 gpm
rpm - 800 gpm
GRAPH BASED ON FLUID RESULTS
Stator Configuration 8" S3 8.00" 7-8, 2 Stage
Bearing Assembly 8 " 203 mm
Volume 400-800 gpm 1,514 - 3,028 lpm
Speed 33-86 rpm
Torque 7,060 ft-lb 9,572 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 374 psi 2,579 kPa
Bit to Bend Length 81" 2,057 mm
O/A Length 294" 7,468 mm
Hole Size 9 5/8" - 12 1/4" 244 - 311 mm
Top Connection 5 1/2 Reg., - 6 5/8 Reg.
Bottom Connection 6 5/8 Reg.
Bearing Load 104,930 daN
(compression) 112,770 daN
Bearing Load 41,970 daN
(tension) 45,105 daN
Max. Overpull
(for re-runs)
Abso lute Over pull 257,985 daN
dynamic=235,900 lb
static=253,525 lb
dynamic=94,350 lb
static=101,400 lb
580,000 lb
101,400 lb 45,105 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
400 33 - 43 7,060 44.4
550 49 - 59 6,300 58.8
800 76 - 86 4,133 59.8
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 107/167
100
200
300
400
500
600
700
800
150
300
450
600
750
900
1,050
1,200
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
MA
X.DIFF.
rpm - 600 gpm
T O R Q
U E
rpm - 900 gpm
rpm - 1,200 gpm
9 5/8" 9.62" 2-3 7.5 STAGE (962-1)
SPE
ED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
600 218-281 4,500 186.8
900 358-421 4,450 303.3
1,200 498-561 4,420 419.1
Stator Configuration 9 5/8" S3 9.62" 2-3 7.5 Stage
Bearing Assembly 9 5/8" 244 mm
Volume 600-1,200 gpm 2,271-4,542 lpm
Speed 218-561 rpm
Torque 4,500 ft-lb 6,101 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 620 psi 4,275 kPa
Bit to Bend Length 97" 2,464 mm
O/A Length 366" 9,296 mm
Hole Size 12 1/4" - 17 1/2" 311-445 mm
Top Connection 6 5/8 Reg., 7 5/8 Reg.Bottom Connection 6 5/8 Reg., 7 5/8 Reg.
Bearing Load dynamic=235,900 lb 104,930 daN
(compression) static=253,525 lb 112,770 daN
Bearing Load dynamic=94,350 lb 41,970 daN
(tension) static=101,400 lb 45,105 daN
Max. Overpull
(for re-runs)
Abs olu te Ove rpu ll 580,000 lb 257,985 daN
101,400 lb 45,105 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 108/167
40
80
120
160
200
240
280
320
100
200
300
400
500
600
700
800
1,500
3,000
4,500
6,000
7,500
9,000
10,500
12,000
MA
X.DIFF.
rpm - 600 gpm
T O R Q
U E
rpm - 900 gpm
rpm - 1,200 gpm
9 5/8" 9.62" 3-4 4.5 STAGE (962-2)
SPE
ED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
600 97-132 6,245 115.4
900 165-200 6,000 188.6
1,200 234-269 5,620 250.5
Stator Configuration 9 5/8" S3 9.62" 3-4, 4.5 Stage
Bearing Assembly 9 5/8" 244 mm
Volume 600-1,200 gpm 2,271-4,542 lpm
Speed 97-269 rpm
Torque 6,245 ft-lb 8,467 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 620 psi 4,275 kPa
Bit to Bend Length 97" 2,464 mm
O/A Length 330" 8,382 mm
Hole Size 12 1/4" - 17 1/2" 311-445 mm
Top Connection 6 5/8 Reg., 7 5/8 Reg.Bottom Connection 6 5/8 Reg., 7 5/8 Reg.
Bearing Load dynamic=235,900 lb 104,930 daN
(compression) static=253,525 lb 112,770 daN
Bearing Load dynamic=94,350 lb 41,970 daN
(tension) static=101,400 lb 45,105 daN
Max. Overpull
(for re-runs)
Abs olu te Ove rpu ll 580,000 lb 257,985 daN
101,400 lb 45,105 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 109/167
40
80
120
160
200
240
280
320
100
200
300
400
500
600
700
800
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
MA
X.DIFF.
rpm - 600 gpm
T O R Q U E
9 5/8" 9.62" 3-4 6 STAGE (962-7)
SPEED
RPM
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.rpm - 900 gpm
rpm - 1,200 gpm
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
600 99-129 7,200 135.7
900 164-194 7,120 222.3
1,200 227-257 7,000 302.6
Stator Configuration 9 5/8" S3 9.62" 3-4, 6 Stage
Bearing Assembly 9 5/8" 244 mm
Volume 600-1200 gpm 2,271-4,543 lpm
Speed 99-257 rpm
Torque 7,200 ft-lb 9,763 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 750 psi 5,275 kPa
Bit to Bend Length 97" 2,464 m m
O/A Length 306" 7,772 m m
Hole Size 12 1/4" - 17 1/2" 311-445 mm
Top Connection 6 5/8 Reg., 7 5/8 Reg.Bottom Connection 6 5/8 Reg., 7 5/8 Reg.
Bearing Load dynam ic=235,900 lb 104,930 daN
(compression) static=253,525 lb 112,770 daN
Bearing Load dynam ic=94,350 lb 41,970 daN
(tension) static=101,400 lb 45,105 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 580,000 lb 257,985 daN
101,400 lb 45,105 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 110/167
25
50
75
100
125
150
175
200
100
200
300
400
500
600
700
800
1,500
3,000
4,500
6,000
7,500
9,000
10,500
12,000
MAX.DIFF.
rpm - 300 gpm
T O R Q U E
9 5/8" 9.62" 4-5 4 STAGE (962-3)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
rpm - 600 gpm
rpm - 900 gpm
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
300 52-68 8,000 79.2
600 110-125 7,500 157.1
900 168-185 6,510 208.2
Stator Configuration 9 5/8" S3 9.62" 4-5, 4 Stage
Bearing Assembly 9 5/8" 244 mm
Volume 300-900 gpm 1,136-3,407 lpm
Speed 52-185 rpm
Torque 8,000 ft-lb 10,848 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 600 psi 4,137 kPa
Bit to Bend Length 97" 2,464 m m
O/A Length 306" 7,772 m m
Hole Size 12 1/4" - 17 1/2" 311-445 mm
Top Connection 6 5/8 Reg., 7 5/8 Reg.Bottom Connection 6 5/8 Reg., 7 5/8 Reg.
Bearing Load dynam ic=235,900 lb 104,930 daN
(compression) static=253,525 lb 112,770 daN
Bearing Load dynam ic=94,350 lb 41,970 daN
(tension) static=101,400 lb 45,105 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 580,000 lb 257,985 daN
101,400 lb 45,105 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 111/167
25
50
75
100
125
150
175
200
75
150
225
300
375
450
525
600
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
MA
X.
DIFF.
rpm - 600 gpm
T O R Q
U E
rpm - 900 gpm
rpm - 1,200 gpm
9 5/8" 9.62" 5-6 3 STAGE (962-4)
SPEED
r pm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Stator Configuration 9 5/8" S3 9.62" 5-6, 3 Stage
Bearing Assembly 9 5/8" 244 m m
Volume 600-1,200 gpm 2,271-4,542 lpm
Speed 40-127 rpm
Torque 8,830 ft-lb 11,972 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 472 psi 3,254 kPa
Bit to Bend Length 97" 2,464 m m
O/A Length 336" 8,534 m m
Hole Size 12 1/4" - 17 1/2" 311-445 mm
Top Connection 6 5/8 Reg., 7 5/8 Reg.Bottom Conenction 6 5/8 Reg., 7 5/8 Reg.
Bearing Load dynam ic=235,900 lb 104,930 daN
(compression) static=253,525 lb 112,770 daN
Bearing Load dynam ic=94,350 lb 41,970 daN
(tension) static=101,400 lb 45,105 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 580,000 lb 257,985 daN
101,400 lb 45,105 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
600 40-62 8,830 67.3
900 74-96 8,025 113.1
1,200 105-127 7,525 150.5
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 112/167
25
50
75
100
125
150
175
200
100
200
300
400
500
600
700
800
1,500
3,000
4,500
6,000
7,500
9,000
10,500
12,000
MAX.DIFF.
rpm - 300 gpm
T O R Q
U E
9 5/8" 8.00" 6-7 4 STAGE (962-5)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftl b
.
rpm - 600 gpm
rpm - 900 gpm
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
300 32-51 8,500 51.8
600 83-102 7,630 120.6
900 134-155 6,560 167.4
Stator Configuration 9 5/8" S3 8.00" 6-7, 4 Stage
Bearing Assembly 9 5/8" 244 m m
Volume 300-900 gpm 1,136-3,407 lpm
Speed 32-155 rpm
Torque 8,500 ft-lb 11,524 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 620 psi 4,275 kPa
Bit to Bend Length 97" 2,464 m m
O/A Length 364" 9,246 m m
Hole Size 12 1/4" - 17 1/2" 311-445 mm
Top Connection 6 5/8 Reg., 7 5/8 Reg.Bottom Conenction 6 5/8 Reg., 7 5/8 Reg.
Bearing Load dynam ic=235,900 lb 104,930 daN
(compression) static=253,525 lb 112,770 daN
Bearing Load dynam ic=94,350 lb 41,970 daN
(tension) static=101,400 lb 45,105 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 580,000 lb 257,985 daN
101,400 lb 45,105 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 113/167
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 114/167
100
200
300
400
500
600
700
800
150
300
450
600
750
900
1,050
1,200
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
MAX.DIFF.
rpm - 600 gpm
T O R Q
U E
rpm - 900 gpm
rpm - 1,200 gpm
9 5/8" 9.62" 2-3 7.5 STAGE (962-1)
SPE
ED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
600 218-281 4,500 186.8
900 358-421 4,450 303.3
1,200 498-561 4,420 419.1
Stator Configuration 9 5/8" 9.62" 2-3 7.5 Stage
Bearing Assembly 9 5/8" 244 mm
Volume 600-1,200 gpm 2,271-4,542 lpm
Speed 218-561 rpm
Torque 4,500 ft-lb 6,101 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 620 psi 4,275 kPa
Bit to Bend Length 100" 2,540 mm
O/A Length 369" 9,373 mm
Hole Size 12 1/4" - 17 1/2" 311-445 mm
Top Connection 6 5/8 Reg., 7 5/8 Reg.Bottom Connection 6 5/8 Reg., 7 5/8 Reg.
Bearing Load dynamic=235,900 lb 104,930 daN
(compression) static=253,525 lb 112,770 daN
Bearing Load dynamic=94,350 lb 41,970 daN
(tension) static=101,400 lb 45,105 daN
Max. Overpull
(for re-runs)
Abs olu te Ove rpu ll 580,000 lb 257,985 daN
101,400 lb 45,105 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 115/167
40
80
120
160
200
240
280
320
100
200
300
400
500
600
700
800
1,500
3,000
4,500
6,000
7,500
9,000
10,500
12,000
MAX.DIFF.
rpm - 600 gpm
T O R Q
U E
rpm - 900 gpm
rpm - 1,200 gpm
9 5/8" 9.62" 3-4 4.5 STAGE (962-2)
SPE
ED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
600 97-132 6,245 115.4
900 165-200 6,000 188.6
1,200 234-269 5,620 250.5
Stator Configuration 9 5/8" 9.62" 3-4, 4.5 Stage
Bearing Assembly 9 5/8" 244 mm
Volume 600-1,200 gpm 2,271-4,542 lpm
Speed 97-269 rpm
Torque 6,245 ft-lb 8,467 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 620 psi 4,275 kPa
Bit to Bend Length 100" 2,540 mm
O/A Length 333" 8,458 mm
Hole Size 12 1/4" - 17 1/2" 311-445 mm
Top Connection 6 5/8 Reg., 7 5/8 Reg.Bottom Connection 6 5/8 Reg., 7 5/8 Reg.
Bearing Load dynamic=235,900 lb 104,930 daN
(compression) static=253,525 lb 112,770 daN
Bearing Load dynamic=94,350 lb 41,970 daN
(tension) static=101,400 lb 45,105 daN
Max. Overpull
(for re-runs)
Abs olu te Ove rpu ll 580,000 lb 257,985 daN
101,400 lb 45,105 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 116/167
40
80
120
160
200
240
280
320
100
200
300
400
500
600
700
800
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
MAX.DIFF.
rpm - 600 gpm
T O R Q U E
9 5/8" 9.62" 3-4 6 STAGE (962-7)
SPEED
RPM
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.rpm - 900 gpm
rpm - 1,200 gpm
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
600 99-129 7,200 135.7
900 164-194 7,120 222.3
1,200 227-257 7,000 302.6
Stator Configuration 9 5/8" 9.62" 3-4, 6 Stage
Bearing Assembly 9 5/8" 244 mm
Volume 600-1200 gpm 2,271-4,543 lpm
Speed 99-257 rpm
Torque 7,200 ft-lb 9,763 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 750 psi 5,275 kPa
Bit to Bend Length 100" 2,540 m m
O/A Length 309" 7,849 m m
Hole Size 12 1/4" - 17 1/2" 311-445 mm
Top Connection 6 5/8 Reg., 7 5/8 Reg.Bottom Connection 6 5/8 Reg., 7 5/8 Reg.
Bearing Load dynam ic=235,900 lb 104,930 daN
(compression) static=253,525 lb 112,770 daN
Bearing Load dynam ic=94,350 lb 41,970 daN
(tension) static=101,400 lb 45,105 daN
Max. Overpull
(for re-runs)
Absolu te Overpu ll 580,000 lb 257,985 daN
101,400 lb 45,105 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 117/167
25
50
75
100
125
150
175
200
100
200
300
400
500
600
700
800
1,500
3,000
4,500
6,000
7,500
9,000
10,500
12,000
MAX.D
IFF.
rpm - 300 gpm
T O R Q U E
9 5/8" 9.62" 4-5 4 STAGE (962-3)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
f tlb.
rpm - 600 gpm
rpm - 900 gpm
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
300 52-68 8,000 79.2
600 110-125 7,500 157.1
900 168-185 6,510 208.2
Stator Configuration 9 5/8" 9.62" 4-5, 4 Stage
Bearing Assembly 9 5/8" 244 mm
Volume 300-900 gpm 1,136-3,407 lpm
Speed 52-185 rpm
Torque 8,000 ft-lb 10,848 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 600 psi 4,137 kPa
Bit to Bend Length 100" 2,540 m m
O/A Length 309" 7,849 m m
Hole Size 12 1/4" - 17 1/2" 311-445 mm
Top Connection 6 5/8 Reg., 7 5/8 Reg.Bottom Connection 6 5/8 Reg., 7 5/8 Reg.
Bearing Load dynam ic=235,900 lb 104,930 daN
(compression) static=253,525 lb 112,770 daN
Bearing Load dynam ic=94,350 lb 41,970 daN
(tension) static=101,400 lb 45,105 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 580,000 lb 257,985 daN
101,400 lb 45,105 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 118/167
25
50
75
100
125
150
175
200
75
150
225
300
375
450
525
600
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
MAX.
DIFF.
rpm - 600 gpm
T O R Q
U E
rpm - 900 gpm
rpm - 1,200 gpm
9 5/8" 9.62" 5-6 3 STAGE (962-4)
SPEED
r pm
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
Stator Configuration 9 5/8" 9.62" 5-6, 3 Stage
Bearing Assembly 9 5/8" 244 m m
Volume 600-1,200 gpm 2,271-4,542 lpm
Speed 40-127 rpm
Torque 8,830 ft-lb 11,972 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 472 psi 3,254 kPa
Bit to Bend Length 100" 2,540 m m
O/A Length 339" 8,611 m m
Hole Size 12 1/4" - 17 1/2" 311-445 mm
Top Connection6 5/8 Reg., 7 5/8 Reg.
Bottom Conenction 6 5/8 Reg., 7 5/8 Reg.
Bearing Load dynam ic=235,900 lb 104,930 daN
(compression) static=253,525 lb 112,770 daN
Bearing Load dynam ic=94,350 lb 41,970 daN
(tension) static=101,400 lb 45,105 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 580,000 lb 257,985 daN
101,400 lb 45,105 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
600 40-62 8,830 67.3
900 74-96 8,025 113.1
1,200 105-127 7,525 150.5
PERFORMANCE
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 119/167
25
50
75
100
125
150
175
200
100
200
300
400
500
600
700
800
1,500
3,000
4,500
6,000
7,500
9,000
10,500
12,000
M
AX.DIFF.
rpm - 300 gpm
T
O R Q
U E
9 5/8" 8.00" 6-7 4 STAGE (962-5)
SPEED
rpm
PRESSURE DIFFERENTIAL psi
TORQUE
ftl b
.
rpm - 600 gpm
rpm - 900 gpm
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
300 32-51 8,500 51.8
600 83-102 7,630 120.6
900 134-155 6,560 167.4
Stator Configuration 9 5/8" 8.00" 6-7, 4 Stage
Bearing Assembly 9 5/8" 244 m m
Volume 300-900 gpm 1,136-3,407 lpm
Speed 32-155 rpm
Torque 8,500 ft-lb 11,524 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 620 psi 4,275 kPa
Bit to Bend Length 100" 2,540 m m
O/A Length 367" 9,322 m m
Hole Size 12 1/4" - 17 1/2" 311-445 mm
Top Connection6 5/8 Reg., 7 5/8 Reg.
Bottom Conenction 6 5/8 Reg., 7 5/8 Reg.
Bearing Load dynam ic=235,900 lb 104,930 daN
(compression) static=253,525 lb 112,770 daN
Bearing Load dynam ic=94,350 lb 41,970 daN
(tension) static=101,400 lb 45,105 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 580,000 lb 257,985 daN
101,400 lb 45,105 daN
PERFORMANCE
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 120/167
25
50
75
100
125
150
175
200
100
200
300
400
500
600
70
0
800
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
MAX.DIFF.
rpm - 600 gpm
T O R Q
U E
9 5/8" 9.62" 6-7 5 STAGE (962-6)
SPEED
RPM
PRESSURE DIFFERENTIAL psi
TORQUE
ftlb.
rpm - 900 gpm
rpm - 1,200 gpm
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
600 48-76 13,300 121.6
900 86-113 12,780 209.3
1,200 124-149 12,000 283.3
Stator Configuration 9 5/8" 9.62" 6-7 5 Stage
Bearing Assembly 9 5/8" 244 m m
Volume 600-1,200 gpm 2,271-4,542 lpm
Speed 48-149 rpm
Torque 13,300 ft-lb 18,035 N*m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 775 psi 5,344 kPa
Bit to Bend Length 100" 2,540 m m
O/A Length 369" 9,373 m m
Hole Size 12 1/4" - 17 1/2" 311-445 mm
Top Connection6 5/8 Reg., 7 5/8 Reg.
Bottom Conenction 6 5/8 Reg., 7 5/8 Reg.
Bearing Load dynam ic=235,900 lb 104,930 daN
(compression) static=253,525 lb 112,770 daN
Bearing Load dynam ic=94,350 lb 41,970 daN
(tension) static=101,400 lb 45,105 daN
Max. Overpull
(for re-runs)
Ab so lu te Ov er pu ll 580,000 lb 257,985 daN
101,400 lb 45,105 daN
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 121/167
30
60
90
120
150
180
210
240
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
M A X . D I F F .
rpm - 900 gpm
T O R Q
U E
11 1/4" 11.25" 3-4 3.6 STAGE (1125-1)
S P E E D
r p m
PRESSURE DIFFERENTIAL psi
T O R Q U E
f t l b
rpm - 1200 gpm
rpm - 1500 gpm
Stator Configuration 11 1/4" 11.25" 3-4 3.6 Stage
Bearing Assembly 11 1/4" 286 mm
Volume 900-1,500 gpm 3,406-5,678 lpm
Speed 81-168 rpm
Torque 8,700 ft-lb 11,795 N *m
Max. Pressure Drop 1,500 psi 10,342 kPa
Max. Diff. Pressure 500 psi 3,447 kPa
Bit to Bend Length 113" 2,870 mm
O/A Length 371" 9,423 mm
Hole Size 12 1/4" - 17 1/2" 311-445 lpm
Top Connection6 5/8 Reg., 7 5/8 Reg.
Bottom Conenction 6 5/8 Reg., 7 5/8 Reg.
Bearing Load dynamic=1,000,000 lb 444,800 daN
(compression) static=1,000,000 lb 444,800 daN
Bearing Load dynamic=500,000 lb 222,400 daN
(tension) static=500,000 lb 222,400 daN
Max. Overpull
(for re-runs)
Abs olu te Overpu ll 1,000,000 lb 444,800 daN
500,000 lb 222,400 daN
Volume(gpm)
Speed(rpm)
Torque(ft-lb)
hp
900 81-100 8,700 134.2
1,200 114-133 8,570 186.0
1,500 149-168 8,350 236.9
SHIPPING INFORMATION
L e n g t h W e ig h t
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 122/167
TABLE FOR SHIPPING PURPOSES ONLY
f t m lb k g
1 1 1 / 1 6 1 0 . 4 3 . 2 4 0 1 8
2 1 / 1 6 9 . 3 2 . 8 5 0 2 3
2 3 / 8 1 3 . 6 4 . 1 1 5 0 6 8
2 7 / 8 1 7 . 3 5 . 3 2 7 5 1 2 5
3 1 / 8 1 5 . 3 4 . 7 3 0 0 1 3 6
3 3 / 8 2 3 . 5 7 . 2 5 0 0 2 2 7
3 3 / 4 1 8 . 8 5 . 7 5 0 0 2 2 7
4 3 / 4 S h o r t 2 0 . 5 6 . 2 9 0 0 4 0 8
5 S 3 2 5 . 3 7 . 7 1 1 0 0 4 9 9
5 2 7 . 0 8 . 2 1 1 0 0 4 9 9
5 1 / 2 2 2 . 8 6 . 9 1 3 0 0 5 9 0
6 1 / 2 3 1 . 4 9 . 6 2 0 0 0 9 0 7
6 1 / 2 S 3 3 0 . 0 9 . 1 2 0 0 0 9 0 7
6 3 / 4 3 1 . 4 9 . 6 2 0 0 0 9 0 7
7 1 / 2 2 6 . 0 7 . 9 3 5 0 0 1 5 8 8
8 2 9 . 0 8 . 8 3 8 0 0 1 7 2 4
8 S 3 2 9 . 0 8 . 8 3 8 0 0 1 7 2 4
9 5 / 8 S 3 3 1 . 2 9 . 5 5 6 0 0 2 5 4 0
9 5 / 8 3 1 . 4 9 . 6 5 6 0 0 2 5 4 0
1 1 1 / 4 3 4 . 0 1 0 . 4 6 5 0 0 2 9 4 8
L e n g t h W e ig h t
M o t o r S iz e
Ray-Son Product Line
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 123/167
Black Max provides its customers with both mechanical and hydraulic/mechanical jars.They range in size from a 1 11/16” mechanical jar to an 8” hydraulic/mechanic jar.Black Max jars are designed to create powerful up or down forces that will ‘jar’ thestring that has become stuck during drilling operation. The jars are manufactured of high strength alloy steel, they are oil lubricated and completely sealed and aredesigned to operate in the harshest of drilling conditions.The hydraulic/mechanical jars consist of a mechanical latch that keeps the jar in theneutral position and prevents unexpected jarring when tripping in or out of the hole.The jars also consist of a hydraulic section that creates a time delay when the jar is in
operation and the latch is disengaged.Black Max’s two way hydraulic/mechanical jars are versatile and easy to use. Tooperate the jars simply apply tension or compression to the running string. Varying thetension or compression loads during the hydraulic time delay controls the intensity of the jar impact. When a push or pull action is applied to the jar, hydraulic oil is forcedaround a restricting valve. This restriction of oil flow from one chamber to the other delays the stroke. This delay enables the running string to stretch before the jar fires.
Black Max provides its customers with a full range of Ray-Son shock tool sizes, from 3½” to 11”.Ray-Son shock tools are designed to cushion heavy axial loading and reduce bitvibration encountered during drilling operations.
The shock tools’ springs consist of belleville spring elements made from heat-treatedsteel. All shock tool internals are sealed completely from drilling fluids and the internalsare oil lubricated.
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 124/167
are oil lubricated.Black Max shock tools are sprung both ways (tension and compression) toaccommodate loading from both directions and are pressure balanced from extremehydrostatic pressures, maximizing the performance of the shock tools. The shock toolshave two types of mandrels so that they can be placed in the string or in the bottomhole locations.These shock tools are cost effective. They maximize bit life as they provide consistentrates of penetration and minimize harmonics created in the drilling string while drilling.Placing the shock tool in an appropriate location in the string will extend drilling stringtubular life, reduce repair costs on thread connections, and extend the life of the tool.
SHOCK TOOL
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 125/167
1 350 475 625 675 775 800 900 950 1100 3 350 475 625 675 775 800 900 950 1100
A 3. 53 4. 81 6. 31 6. 81 7.8 8. 12 9. 06 9. 56 11 A 3. 53 4. 81 6.3 6. 81 7.8 8. 12 9. 06 9.56 11
B 2.62 3.5 4.5 4.88 5.5 5.5 6.75 7.25 8 B 3 .03 3.9 5.04 5.52 6.08 6.08 7.49 7.99 9
C 2.5 3.37 4.43 4.75 5.25 5.25 6.45 7 7.63 C 2 .88 3.37 4.26 4.88 5.26 5.3 6.6 7.99 9
D 1.75 2.38 3 3.25 3.75 3.75 4.81 4.81 5.38 D 3 .03 3.9 3.5 5.52 6.08 6.08 7.25 7.99 9
E 1.64 2.26 2.85 2.97 3.56 3.56 4.56 4.56 5.25 E 2.25 20.5 20.43 32.2 24 30 35.33 4 4
F 1 1.5 2 2.25 2.5 2 .5 3 2 .81 2.88 F 12 8.2 9.07 6.55 7 .01 16.75 6.5 27.33 37
G 11 17.4 20.5 19.7 14.88 19 18.5 18.5 23.9 G 2.25 6.5 8.5 9 10.74 5 14.5 4 4
H 6 8.1 5.3 8.1 10.62 11 13.67 13.67 14.5
J 10.87 15.6 13.2 18.5 21 21 24.5 29 30 4 350 475 625 675 775 800 900 950 1100
K 12.13 16 16.5 26.7 15 21 20.83 20.83 31.6 A 2.37 3.36 4.25 4.87 5.25 5.24 6 6.25 7.25
B 1 1.5 2 2.25 2.5 2.5 3 2.81 2.88
2 350 475 625 675 775 800 900 950 1100 C 1.88 2.88 3 4 4.88 4.88 5.18 5.18 5.38
A 2. 64 3. 51 4. 51 4.9 5. 52 5. 52 6. 77 7. 29 8. 02 D 2 5. 89 4.5 7. 75 9. 32 6.6 5.7 5.7 6.4
B 3.53 4.81 6.31 6.81 7.8 8.12 9 .06 9 .56 11 E 2 1 .3 2 2 1 .93 1.4 2.3 2.3 2 .98
C 2.75 3.63 4.75 5.38 6 6 7 7.5 9
D 2.24 2.77 3.51 4.34 4.73 4.73 5.85 6.4 6.8 5 350 475 625 675 775 800 900 950 1100
E 3 4.4 3.3 5 6.9 6.9 5.38 5.38 7 A 2.5 3 3.5 4.5 4 2.5 6.6 6.77 7.75
F 3.75 3.9 2.5 3.3 4.97 4.97 7.75 8.62 9.5 B 3.53 4.81 6.31 6.81 7.8 8.12 9.06 9.56 11
G 5.75 8.86 7.2 11.2 9.75 9.75 11.63 15.25 14.2 C 1.5 3 2 3.5 4 2.5 4.93 5.43 4.88
D 5.84 3.5 6 6 4.5 4.5 14 14 15.17
E 5 .16 10.5 12 12 7.5 10.5 12 8 11.53
MECHANICAL JAR
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 126/167
1 1 6 8 4 7 5 6 2 5 6 7 5 4 1 6 8 4 7 5 6 2 5 6 7 5
A 1 . 6 9 4 .8 6 . 2 8 6 .6 A 1 .6 9 4 .8 6 . 2 5 6 .6
B 1 . 1 9 3 .5 4 . 6 3 4 . 7 5 B 1 .3 2 3 . 8 9 5 . 0 4 5 .3 8
C 1 . 0 8 3 .4 4 . 4 6 4 . 6 8 C 0 .9 3 .2 3 . 7 5 4 .0 5
D 0. 31 2 2.25 2 .5 D 1 0 . 5 5 2 0 . 5 2 4 2 4 . 5
. . . . . . .
F 1 4 .3 1 8 .4 1 7 . 6 2 1 9 .6
G 1 6 .9 2 2 . 7 5 2 3 .5 2 2 . 5 9 5 1 6 8 4 7 5 6 2 5 6 7 5
H 1 . 2 5 3 . 2 5 4 . 8 8 4 . 8 1 A 1 .6 9 4 .8 6 . 2 5 6 .6
B 1 .1 9 3 . 8 9 4 . 6 3 4 .7 6
2 1 6 8 4 7 5 6 2 5 6 7 5 C 1 .1 9 3 .5 4 . 7 5 5
A 1 . 1 9 3 . 5 1 4 . 6 4 4 . 7 6 D 1 .1 9 2 3 3 .7 5
B 1 . 6 9 4 .8 6 . 2 5 6 .6 E 1 9 .2 7 6 .8 1 5 . 2 5 1 5 .3 7
C 1 . 2 5 3 . 7 5 5 . 2 5 5 . 2 5 F - 1 6 .4 5 . 7 5 5 .6 3
D 0 . 8 8 3 . 0 7 3 . 9 8 4 . 0 9 G - 2 .1 1 4 1 5 .0 1
E 1 . 6 1 4. 7 5 5. 7 5 6 .5 H - 1 0 .7 1 2 9 .6 5
. . .
G 3 .4 1 0 . 7 5 1 0 . 7 5 1 0 . 7 5 6 1 6 8 4 7 5 6 2 5 6 7 5
A 1 .3 3 . 8 7 5 . 0 2 5 .3 8
3 1 6 8 4 7 5 6 2 5 6 7 5 B 0 .7 7 3 3 .5 3 .7 5
A 1 . 6 9 4 .8 6 . 2 5 6 .6 C 0 .3 1 2 2 . 2 5 2 .5
B 1 . 3 2 3 . 8 9 5 . 0 4 5 . 3 8 D 1 .5 4 .5 6 .5 6 .5
C 0 .9 3 .2 3 . 7 7 4 . 0 5 E 2 6 .7 4 2 4 8 4 8
D 1 4 .8 2 0 2 2 .5 2 2 .5
E 1 .7 4 .5 6 5 .5 7 1 6 8 4 7 5 6 2 5 6 7 5
A 1 .1 8 3 . 4 9 4 . 6 1 4 .7 5
B 0 .3 1 2 2. 2 5 2 .5
. .
HYDRAULIC/MECHANICAL JAR
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 127/167
1 350 475 650 800
A 3.53 4.8 6.6 8.12
B 2.62 3.5 4.75 5.5
C 2.5 3.4 4.69 5.25
D 1.13 2 2.75 3
E 8.9 10.6 20 19.14
F 20.15 27.24 25.75 27.61
G 24.65 34.84 31.69 31
H 2.14 3.25 4.81 4.38
2 350 475 650 800
A 3.53 4.8 6.6 8.12
B 2.88 3.75 5.25 6
C 2.24 3.07 4.27 4.73
D 2.64 3.51 4.76 5.52
E 3.2 4.75 5.75 6.85
F 16.3 21 20.5 21.64
G 5.75 10.75 10.75 9.75
3 350 475 650 800
A 3.53 4.8 6.6 8.12
B 2.88 3.89 5.38 6.08
C 2.25 3.2 4 4.5
D 20.5 28 30.5 30.5
E 2.5 4.5 5.5 6
4 350 475 650 800
A 2.86 3.8 5.38 6.04
B 2 3 3.69 4.25
C 1.13 2 2.75 3
D 2.5 4.5 6.5 6
E 43 49.5 55.5 60.25
5 350 475 650 800
A 3.53 4.8 6.6 8.12
B 2.63 3.5 4.75 5.5
C 2 2.75 4 4.5
D 24.25 32.12 34.5 36
E 2.5 4.5 5.5 6
6 350 475 650 800
A 2.59 3.48 4.73 5.48
B 1.88 2.63 3.63 4.13
C 1.75 2.44 3.38 3.88
D 1.13 2 2.75 3
E 2.5 5.5 7.3 6.5
F 23.2 29.75 30.86 31.49
G 7.05 8.4 8.74 8.76
7 350 475 650 800
A 3.53 4.8 6.6 8.12
B 2.77 3.69 5.14 5.75C 30.7 39.3 40.5 41.5
8 350 475 650 800
A 2.4 3.25 4.5 4.88B 1.88 2.63 3.63 4.13
C 1.13 2 2.75 3
D 2.5 3 3 3
E 19.5 25 26.25 27
9 350 475 650 800
A 3.53 4.8 6.6 8.12
B 2.89 3.5 4.75 5.5
C 2 2.75 4 4.5
D 18.75 19.5 19.5 21
E 2.5 4.5 5.5 6
10 350 475 650 800
A 3.53 4.8 6.6 8.12
B 1.9 3.2 4.5 5
C 1.13 2 2.75 3
D 4 4.8 5.4 5.5
E 7 10.2 10.6 13.5
11 350 475 650 800
A 3.53 4.8 6.6 8.12
B 2.88 3.89 5.38 6.08
C 2.25 3.2 4.05 4.5
D 20.5 20.5 24.5 26.5
E 2.5 4.5 5.5 6
MECHANICAL JARS
Tool Size (in.) 1 11/16 4 3/4 6 1/4 6 3/4
HYDRAULIC / MECHANICAL JARS
Tool Size (in) 3 1/2 4 3/4 6 1/2 8
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 128/167
( )
(mm) 43 121 159 171
O.D. (in) 1.69 4.8 6.28 6.6
(mm) 43 122 160 167
I.D. (in.) 0.31 2.25 2.25 2.5
(mm) 8 51 57 64Length (ft) 6.1 10.1 12.3 12.4
(m) 1.9 3.1 3.7 3.8
Max. Latch Setting (lb) 10,000 45,000 85,000 100,000
(daN) 4,450 20,000 37,800 44,500
Max. Tensile Pull (lb) 25,000 300,000 531,000 531,000
(after jarring) (daN) 11,100 133,440 236,188 236,188
Piston Area (in.2) 1.1 9.6 16.7 17.7
(cm2) 7.2 46.2 107.7 114.3
( )
(mm) 89 121 165 203
O.D. (in) 3.53 4.8 6.6 8.12
(mm) 90 122 168 206
I.D. (in.) 1.13 2 2.75 3
(mm) 29 51 70 76Length (ft) 14 17.5 19.3 20
(m) 4.3 5.3 5.9 6.1
Max. Latch Setting (lb) 25,000 45,000 100,000 120,000
(daN) 11,100 20,000 37,800 53,350
Max. Prejar Pull (lb) 30,000 50,000 105,000 125,000
(daN) 13,350 22,250 46,700 55,600
Max. Tensile Pull (lb) 150,000 265,000 531,000 733,000
(after jarring) (daN) 66,720 117,870 236,188 326,000
Piston Area (in.2) 2.8 5.4 10.3 12.6
(cm2) 17.8 34.9 66.6 81.1
120,000
Approx. 60,000
UP
DOWN
100,000
Approx. 50,000
UP
DOWN
45,000
Approx. 22,500
UP
DOWN
25,000
Approx. 12,500
UP
DOWN
TOOL SIZE
I.D.
LENGTH (Latched)
WEIGHT
STROKE UP & DOWN(Free stroke after valve release)
MAX. PREJAR PULL (lbs)
MAX. PULL (lbs) (After jarring)
MAX. TORSIONAL LOAD (ft-lb)
PUMP OPEN AREA
8"
3.00"
20.0 ft
2500 lbs
6”
180,000
733,000
65,000
6.3 in2
6½”
2.75"
19.3 ft
1500 lbs
6”
140,000
531,000
42,000
4.4 in2
4¾”
2.25"
17.5 ft
800 lbs
1.8 in2
6”
65,000
265,000
12,000
PRESET RELEASE (lbs)
2.5 in2
3½”
1.13”
14 ft
400 lbs
6”
30,000
150,000
7,000
SHOCK TOOLS
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 129/167
BEST HITTER SPECIFICATIONS
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 130/167
** CONNECTIONS CAN BE MANUFACTURED TO CLIENTS' 1SPECIFICATIONS
Design Features Of The BEST HITTER Drilling Jar
1. Heat-treated and stress relieved aircraft quality SAE 4340 and 4140 steel.
2. All box and pin connections both internal and external are stress relieved.
3. Internal and external connections are torqued to manufacturer specifications,which have been proven in the field.
4. Hydrostatic pressure does not affect the BEST HITTER.
TOOL O.D. 4-3/4" 6-1/4" 7-3/4"
TOOL I.D. 2" 2-1/4" 2-3/4"
TOOL JOINT 3-1/2" API 4-1/2" API 6-5/6" REG.
**CONNECTION I.F. I.F. REG.
OVERALL LENGTH 31' 34.5' 36'
TENSILE YIELD STRENGTH 40,000 70,000 120,000
TORQUE YIELD STRENGTH 19,000 35,000 65,000
DOWN STROKE 8 8 8
UP STROKE 8 8 8
TOTAL STROKE LENGTH 16 16 16
WEIGHT IN LBS. 1400 2400 4000
OPERATING INSTRUCTIONS
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 131/167
The Best Hitter mechanical drilling jar is self-cocking and will trip immediately after the required weight or pull is applied. The Best Hitter is delivered to the location inthe cocked position, with about 8" of the mandrel exposed, and will usually becocked when it is pulled out of the hole.
To run the jar in the hole, it is recommended that the jar be uncocked. Sometimes, itmay be necessary to run the jar in the cocked position, i.e. in fishing operations.
To uncock the Best Hitter jar, you need to do the following: With drill pipe or collars
to be used above the jar, set the slips on the jar body below the mandrel. Unlock therotary. The break out tongs should be placed on the jar above the mandrel and theback up tongs below the mandrel. Using a rope to pull on the break out tongs turnthe mandrel 1/8 turn to the left. Hold the 1/8 turn and pick up on the string to openthe jar. There will be 16 inches of exposed mandrel (approximately). Pull the slipsand run the jar in the hole.Note: DO NOT TURN MANDREL OVER 1/8 TURN TO THE LEFT.
JAR PLACEMENT IN THE STRING: Run three collars above the jar. With hevi-watedrill pipe at least five joints should be run above the jar.
UPWARD STROKE: Pull on string until the jar setting specified is reached and jar will trip.
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 132/167
RECOCK JAR: Slack off on drill string until slightly below the weight of the stringabove the jar. The weight indicator needle should bobble when the jar completes itsfree travel and recocks.
EXAMPLES:
250.000 Total indicator weight -40.000 Bottom Hole Assembly below the jar 210.000 Weight of the string above the jar +90.000 Upstroke Setting on jar
300.000+20.000 Hole drag picking up320.000 Indicator reading to trip jar
You will probably have to slack off to about 200.000 to cock the jar for another upward hit.
DOWNWARD STROKE: Slack off on the string until the setting reached which is
required to trip the jar.
TO RECOCK FOR JARRING DOWN ONLY: Pick up pipe or string until the weightabove the jar is slightly above the weight above the jar. A slight bobble on theindicator will be noticed when the jar recocks. Free travel will also be noted.
EXAMPLE FOR DOWNWARD TRIPPING OF JAR:
250.000 Total indicator weight38 000 Weight below the jar
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 133/167
-38.000 Weight below the jar 212.000 Weight below jar -36.000 Upstroke Setting on jar 176.000
-20.000 Hole drag156.000 Indicator reading necessary to trip jar downward
NOTE: The downward stroke is less noticeable than the upward stroke in mostcases. The downward tripping can only be detected by the weight indicator in mostcases especially in deep holes and when using small jars.
HEAVIER JAR TRIPPING: Apply and hold right hand torque to drill string. Apply thetorque 1/2 around at a time until the desired setting is reached. With too much righthand Torque it would not be possible to pull enough so that the jar would trip. In theevent that too much right hand Torque is applied, release the torque and the jar willreturn to the original setting.
LIGHTER JAR TRIPPING: Apply and hold left hand torque to drill string. Apply thetorque 1/2 round at a time until the desired setting is reached. With too much lefthand torque the jar will be out of jay and you will not have a jarring effect. This wouldgive you 6 inches of free travel. To correct too much left hand torque, release thetorque and the jar will return to its original setting.
TROUBLE SHOOTING JARS: When the string becomes stuck while drilling, it islikely that some right hand torque has been trapped in the string. To correct this, pickup the string to the weight of the string above the jar and apply three rounds of left-
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 134/167
hand torque. Hold the torque for a few seconds and release. Repeat this procedureuntil you get three rounds back to the right. When you pick up on the string at thispoint, the jar should hit. If it does not hit, look for free travel in the string and if thereis none, then you are probably stuck above the jar.
NOTE: While going into the hole with a jar in the open position, the driller shouldensure that when he sets the slips they aren’t sitting on a ledge where the jar hastaken weight and may slip off. If this happens it is possible that the bit may roll off after you have set the slips, unlatched the elevators and gone after another stand of pipe.
This might lead you to think that the jar has gone off on its own and this should not bethe case.
Rig Rattler
Features:
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 135/167
• At 15’ (4.58m) long, this jar was designed to be the shortest combination jar in theindustry.
• The “Rig Rattler” has a total of 22” of strokeBump DownFrom the closed position, 12” of free stroke is built into the jar so it can operate as abumper sub. In this regime the jar can bump down as often as desired withouthaving to fire the jar or enter its metering section.Fully extended, the “Rig Rattler” provides 22” of unrestricted bumper stroke.
Jarring UpThe “Rig Rattler” will only fire if a force greater than the customers’ required safetysetting is achieved. From that point the jar will meter 4” before providing 6” of impactstroke. The time to fire as well as jarring impact is adjusted by how much force isexerted on the jar.
• The built in safety mechanism of the jar allows worry free tripping. The “Rig Rattler”is hydrostatically balanced. It does not have any mud ports to plug up, and only has
two seal surfaces exposed to drilling mud.• Connections on downhole tools bother you? This jar has only three internalconnections.
• The internal components of the “Rig Rattler” have been specially designed toeliminate fluid restrictions inside the jar during either the up or down hitting stroke.By eliminating these restrictions the hitting power of the jar is maximized.
• The valve of the “Rig Rattler”‘, which controls the safety setting and timing of the jar, is filtered from contaminants during all modes of operation.
• Use of the “LEE Jeva” make the firing time of the “Rig Ratter” independent of
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 136/167
temperature.
The “Rig Rattler” jar has been designed to be the toughest, hardest hitting jar in theindustry. As with most things, the best idea is often the simplest. This drilling jar meets this criteria. Through the ruggedness and simplicity of its design we believethat the “Rig Rattler” is the best jar on the market. It is easy to run, and costeffective to maintain. These are savings that can be passed on to our customers.
O.D. 4 3/4” 6 1/2” 6 3/4”
I.D. 2 1/4” 2 1/2” 2-1/2Maximum Pre-jar pull
70,000 lb 200,000 lb 200,000 lb
Maximum Post- jar pull
230,000 lb 585,000 lb 585,000 lb
Weight 550 lb 1000 lb 1150 lbMax Torque 12,500 ft-lb 27,000 ft-lb 42,000 ft-lb
Closed Length 12 ft 15 ft 15 ftExtended Length 13.8 ft 16.8 ft 16.8 ft
MILLINGRUN #1
Well bore preparation prior to whipstock installation:
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 137/167
Well bore preparation prior to whipstock installation:
1. Determine casing size, weight, and grade (if possible) to assure the correct Whipstock andMills are ordered.
2. Run a casing calibration log and casing scraper run prior to setting the bridge plug. A
bridge plug or false bottom is required to activate, or set, the anchor mechanism on theWhipstock. The bridge plug or false bottom should be set 5 to 6 feet (1.5 to 2 meters)
above a casing collar in a full joint of casing.3. To insure the well bore is free of restrictions or doglegs, which could possibly cause a
premature shearing of the Whipstock, it is recommended a drift run be made with a packed millingassembly. This will also verify bridge plug depth, bridge plug integrity, and the pipe tally.
Run one
B.H.A. #1 Whipstock - Starting Mill - Orientation Sub - Drill String
• Make up UBHO Sub (orientation sub) to the Starting Mill and orient the keyed sleeve to the faceof the Whipstock. Verify setting with Company Man or Directional Drillers.
• Make up UBHO sub and Starting Mill to one joint of drill pipe and attach the Starting Mill to theWhipstock.
• Remove the shipping guard from the anchor trip mechanism.
• Trip in hole in a slow and smooth manner. Any sudden stops or jerks, may result in a prematureshearing of setting bolt, causing the Whipstock to free fall to bottom.
• Stop short of tagging bridge plug.
• Rig up and run Gyro into the hole. Stop short of tagging bridge plug.
• Work Pipe to relive any torque and take readings with Gyro.
• Manually rotate drill string to orientate the Whipstock face to the desired hole azimuth. HaveCompany Man or Directional Drillers confirm orientation.
• Slowly run in while watching the weight indicator. When the drill string begins to take weight,STOP, and recheck orientation with the Company Man or Directional Drillers.
• If readings are good, pull Gyro out of orientation sub.
Set down weight on the Whipstock to shear the roll pin and cap screw on the spring loaded plunger,thus setting the slip on the anchor mechanism
starting mill
guide lug
shear bolt
slip
bridge plug
RUN #2
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 138/167
watermelon
mill
window
mill
• After setting the Slip, set down additional weight to shear the setting bolt from the Whipstock. After shearing the setting bolt, pick up a short distance and set weight on Whipstock again.
• Pick up and manually rotate the drill string to insure the setting bolt has sheared and the starting
Mill is free from the Whipstock.• Pull Gyro out of hole. Survey on the way out if required.
• Kick in the pumps and engage the rotary table or power swivel.
• Slowly lower drill string and begin milling procedures.
• Once the desired milling depth is reached with Starting Mill, circulate the hole clean and trip out of the hole. Casing cuttings will be collected on the Ditch Magnets.
• Visually inspect the bottom hole assembly for any signs of unusual wear.
Run Two
B.H.A. #2 Window Mill - Watermelon Mill - Bit Sub - Drill Collars - Drill String
• Pick up drill collars or heavy weight and one joint of drill pipe.
• Make up the Bit Sub, Watermelon Mill and Window Mill.
• Run in the hole with the second milling assembly and stop short of the top of the Whipstock. Donot hit the top of the Whipstock.
• Kick in the pumps and engage the rotary table or power swivel.
• Slowly lower the drill string until you begin picking up torque.
• Continue milling procedures through out the length of the Whipstock face.
• Once off the face of the Whipstock, continue drilling until there is a short open hole made.
• While rotating, make a couple of passes throughout the entire length of the Whipstock face tocheck for any tight spots.
• Pick up above the top of the whipstock and disengage rotary table or the power swivel. Make acouple of passes (without rotating) throughout the entire length of the Whipstock Face to check for any tight spots.
• Circulate hole clean and pull out of the hole.
• Gage Window Mill to insure a full gage hole has been milled.
WHIPSTOCKS
Casing hipstock Use Mill Use MillCasing hipstock
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 139/167
Dia.
(in)
Dia.
(mm)
Wt.
(lb/ft)
Wt.
(kg/m)
Dia.
(in)
Dia.
(mm)
Dia.
(in)
Dia.
(mm)
13.5 20.09 3 1/2 88.9 3 3/4 95.3
11 16.37 3 1/2 88.9 3 7/8 98.4
9.5 14.14 3 1/2 88.9 3 7/8 98.44 3/4 121 16 23.81 3 1/2 88.9 3 3/4 95.3
23.2 34.52 3 7/8 98.4 4 1/8 104.8
18 26.79 4 101.6 4 1/8 104.8
15 22.32 4 101.6 4 1/4 108.0
13 19.35 4 101.6 4 3/8 111.1
11.5 17.11 4 101.6 4 3/8 111.1
23 34.23 4 1/4 108.0 4 1/2 114.3
20 29.76 4 1/4 108.0 4 5/8 117.5
17 25.30 4 1/2 114.3 4 3/4 120.7
15.5 23.07 4 1/2 114.3 4 3/4 120.7
14 20.83 4 1/2 114.3 4 7/8 123.813 19.35 4 1/2 114.3 4 7/8 123.8
23 34.23 4 1/2 114.3 5 1/8 130.2
20 29.76 4 1/2 114.3 5 1/8 130.2
18 26.79 4 1/2 114.3 5 1/4 133.4
15 22.32 4 1/2 114.3 5 3/8 136.5
32 47.62 5 1/4 133.4 5 1/2 139.7
28 41.67 5 1/4 133.4 5 5/8 142.9
24 35.71 5 1/4 133.4 5 3/4 146.1
20 29.76 5 1/2 139.7 5 7/8 149.2
17 25.30 5 1/2 139.7 6 152.4
38 56.55 5 1/4 133.4 5 3/4 146.1
35 52.08 5 1/2 139.7 5 7/8 149.232 47.62 5 1/2 139.7 5 7/8 149.2
29 43.15 5 1/2 139.7 6 152.4
26 38.69 5 1/2 139.7 6 1/8 155.6
23 34.23 5 1/2 139.7 6 1/8 155.6
20 29.76 5 1/2 139.7 6 1/4 158.8
17 25.30 5 1/2 139.7 6 3/8 161.9
178
127
140
152
168
4 1/2
6 5/8
7
5
114
5 1/2
6
Dia.
(in)
Dia.
(mm)
Wt.
(lb/ft)
Wt.
(kg/m)
Dia.
(in)
Dia.
(mm)
Dia.
(in)
Dia.
(mm)
39 58.04 6 152.4 6 1/2 165.1
33.7 50.15 6 152.4 6 5/8 168.3
29.7 44.20 6 1/4 158.8 6 3/4 171.526.4 39.29 6 1/4 158.8 6 3/4 171.5
24 35.71 6 1/4 158.8 6 7/8 174.6
20 29.76 6 1/4 158.8 7 177.8
49 72.92 7 177.8 7 3/8 187.3
44 65.48 7 177.8 7 1/2 190.5
40 59.52 7 177.8 7 1/2 190.5
36 53.57 7 177.8 7 5/8 193.7
32 47.62 7 177.8 7 3/4 196.9
28 41.67 7 177.8 7 7/8 200.0
24 35.71 7 177.8 7 7/8 200.0
53.5 79.61 8 203.2 8 3/8 212.747 69.94 8 203.2 8 1/2 215.9
43.5 64.73 8 203.2 8 1/2 215.9
40 59.52 8 203.2 8 5/8 219.1
36 53.57 8 203.2 8 3/4 222.3
32.3 48.07 8 203.2 8 3/4 222.3
29.3 43.60 9 228.6 8 7/8 225.4
55.5 82.59 9 228.6 9 1/2 241.3
51 75.89 9 228.6 9 5/8 244.5
45.5 67.71 9 228.6 9 3/4 247.7
40.5 60.27 9 228.6 9 3/4 247.7
32.75 48.74 9 228.6 9 7/8 250.8
60 89.29 10 254.0 10 1/2 266.754 80.36 10 254.0 10 5/8 269.9
47 69.94 10 254.0 10 3/4 273.1
42 62.50 10 254.0 10 3/4 273.1
38 56.55 10 254.0 10 7/8 276.2
72 107.14 11 1/2 292.1 12 1/8 308.0
68 101.19 11 1/2 292.1 12 1/8 308.0
61 90.77 11 1/2 292.1 12 1/4 311.2
54.5 81.10 11 1/2 292.1 12 1/4 311.2
48 71.43 11 1/2 292.1 12 3/8 314.3
194
219
244
273
298
34013 3/8
7 5/8
8 5/8
11 3/4
10 3/4
9 5/8
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 140/167
CANFISH SERVICES
CanFish Services Inc. is a Canadian company that provides specialty oilfield rental, sales and servicetoCanadianand Internationaloil andgas producers CanFishServices corebusiness is theprovision
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 141/167
to Canadian and International oil and gas producers. CanFish Services core business is the provisionof Fishing Tool Services including manufacture and sale of fishing tool equipment, engineering andplanning, well site supervision and rental of all types of Fishing Tools and Fishing Tool Services inconjunction with Wireline Pipe Recovery Services.
Specific services include:Open Hole Fishing ServicesWork Over Planning and ExecutionRemedial Work Over Execution
Whipstock and Sidetrack ServicesOne Trip WhipstocksWashover Burning ShoesCasing Cutting and RetrievalSpearsMilling ToolsEconomills
High Performance Pilot MillsGeneral Rental ToolsCasing RollersComplete Wireline Pipe Recovery ServicesBack Off Equipment
Chemical CuttingCased Hole Fishing ServicesPacker Milling and Retrieving
Coiled Tubing FishingRetrievable WhipstocksWashover Pipe and AccessoriesCasing PatchesOver-shotsTaper Taps and Die CollarsJunk Mills
Taper MillsSection MillsCasing Repair Driving SwagesFree Point Tools 1 l/16” - 1.3/8”Jet Cutting
General Wireline Services
CanFish Services Inc. has approximately fifteen Fishing Tool Supervisors on staff with an averageminimumof eighteenyears direct fieldexperience WealsohaveseveralFishingToolSupervisors with
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 142/167
minimum of eighteen years direct field experience. We also have several Fishing Tool Supervisors withsignificant international experience working onshore and offshore in the North Sea, Middle East andSouth East Asia.
Locations
CanFish Services Ltd.Bay 1 1804 4 StNisku, Alberta
Ph: (780) 955-8998Fx: (780) 955-8944
CanFish Services Ltd.Suite 1410Calgary, AlbertaPh: (403) 231-9140
Fx: (403) 231-9140
CanFish Services Inc10903 78 Ave.Grande Prairie, Alberta
Ph: (780) 532-7713Fx: (780) 513-4161
Lloydminister Agent:Tryton Tools Services Ltd.37093 – 56b Ave.Lloydminister, Alberta
Ph: (780) 875-0800Fx: (780) 875-8731
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 143/167
TORQUE CONNECTIONS
111/16 2 1/16
2.375 &
Short
2.875&
Short 31/8 33/8 33/4
4.75 &
Short 5 51/2 61/2
61/2
Short. 63/4 71/2
8&
Short
8"
Series 3 95/8
95/8
Short 111/4
End Cap 200 500 500 1000 1200 1500 1500 4000 4000 4500 6500 6500 6500 12000 12000 12000 25000 25000 60000
Body Connection 300 600 1000 2000 3000 3500 4500 10000 12000 15000 22000 22000 22000 35000 40000 40000 60000 60000 75000Mandrel To Washpipe 120 200 250 500 1000 1250 1500 3000 4000 4500 6000 11000 6000 10000 12000 12000 35000 50000
Preload Nut200
short only
400short only 400
D.S. To Washpipe 100 150 200 400 800 1000 1000 2500 3500 4000 5500 10000 5500 9000 11000 11000 18000 25000 40000
D.S. To Rotor 100 150 200 400 800 1000 1000 2500 3500 4000 5500 5500 5500 9000 11000 11000 18000 25000 40000
Adj. Mandrel 800 2000 2000 3500 3500 10000 12000 13000 22000 22000 22000 35000 40000 40000 60000 60000 75000
Stab/Thread Protector 3500 8000 10000 12000 12000 12000 24000 30000 30000 38000 38000 75000
BUILD RATESDEGREES per 100ft
Tool Size (in) Hole Size (in) .39° .78° 1.15° 1.50° 1.83° 2.12° 2.38° 2.60° 2.77° 2.90° 2.97° 3.00°
2 7/8 3 1/2 0 2 3 9 8 9 14 4 20 3 26 3 32 4 38 6 44 9 51 2 57 6 63 9
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 144/167
NOTE! All calculations contained herein are based on slick drilling assemblies. Addition of stabilization may significantlyalter dog leg expectancies. Formation, competence, or lack thereof, may also adversely affect the accuracy of the abovepredictions.
2 7/8 3 1/2 0.2 3.9 8.9 14.4 20.3 26.3 32.4 38.6 44.9 51.2 57.6 63.9
4 1/2 1.9 5.7 10.1 14.8 19.8 25.1 30.6 36.2 41.9
3 1/8 3 3/4 3.4 9 15.3 22.1 29.2 36.4 43.8 51.3 58.8 66.4 74.1
3 7/8 1.8 6.6 12.5 18.9 25.7 32.7 39.9 47.1 54.6 62 69.6
4 3/4 3.3 8 13.2 18.8 24.7 30.9 37.4 43.9
3 3/8 4 1/2 1.8 5.2 9.2 13.6 18.2 23 27.9 32.9 38 43.1 48.2
4 3/4 3.3 6.9 11 15.3 19.9 24.6 29.4 34.3 39.3 44.3
5 7/8 2.4 5.5 9 12.7 16.7 20.9 25.2 29.7
3 3/4 4 1/2 1.3 5.7 10.8 16.4 22.2 28.3 34.4 40.7 47.1 53.5 59.9
4 3/4 2.7 7.2 12.2 17.6 23.3 29.1 35.2 41.3 47.5 53.8
5 7/8 3.1 7.1 11.5 16.2 21.2 26.3 31.7
4 3/4 6 2.2 5 8.1 11.4 14.9 18.4 22 25.6 29.3 33 36.7
6 1/8 1.7 4.4 7.4 10.6 14 17.5 21 24.6 28.3 31.9 35.6
6 1/4 1.3 3.8 6.7 9.9 13.2 16.6 20.1 23.7 27.3 30.9 34.6
6 1/2 2.8 5.5 8.5 11.7 15 18.4 21.9 25.4 29 32.6
6 3/4 2 4.4 7.2 10.3 13.5 16.8 20.2 23.6 27.1 30.7
4 3/4 SH 6 1.8 5 8.9 13.1 17.5 22.1 26.8 31.6 36.4 41.4 46.3
6 1/8 1.2 4.1 7.8 11.8 16.1 20.6 25.2 29.9 34.7 39.6 44.5
6 1/4 3.3 6.8 10.7 14.8 19.2 23.7 28.4 33.1 37.9 42.76 1/2 1.9 5 8.5 12.4 16.6 20.9 25.4 30 34.6 39.4
6 3/4 3.4 6.6 10.3 14.2 18.3 22.6 27.1 31.6 36.2
5 6 2.4 5.5 9 12.7 16.5 20.4 24.4 28.4 32.4 36.5 40.6
6 1/8 1.8 4.7 8.1 11.7 15.5 19.3 23.2 27.2 31.2 35.2 39.3
6 1/4 1.3 4 7.3 10.8 14.4 18.2 22.1 26 30 34 38
6 1/2 2.8 5.8 9.1 12.6 16.2 20 23.8 27.7 31.6 35.6
6 3/4 1.8 4.5 7.5 10.9 14.4 18 21.7 25.5 29.4 33.3
5 1/2 6 3/4 1.9 4.5 7.3 10.3 13.4 16.5 19.8 23 26.3 29.5 32.8
7 7/8 1 3 5.4 8 10.8 13.6 16.6 19.6 22.7 25.8
6 1/2 7 7/8 1.6 4 6.6 9.4 12.2 15.2 18.2 21.2 24.3 27.3 30.4
8 1/2 2.1 4.3 6.8 9.4 12.2 15 17.9 20.9 23.8 26.8
8 3/4 1.5 3.6 5.9 8.5 11.1 13.9 16.7 19.6 22.5 25.5
9 5/8 1.4 3.3 5.5 7.9 10.4 13 15.7 18.4 21.3
6 1/2 Short 7 7/8 1.3 3.9 7 10.2 13.7 17.2 20.8 24.4 28.1 31.9 35.6
8 1/2 1.5 3.9 6.8 9.8 13 16.4 19.8 23.3 26.9 30.5
8 3/4 0.7 3 5.6 8.5 11.6 14.2 18.2 21.6 25 28.6
9 5/8 0.2 2.2 4.6 7.2 10.1 13.1 16.2 19.4 22.7
6 3/4 7 7/8 1.8 4.2 6.9 9.7 12.6 15.5 18.5 21.5 24.5 27.5 30.6
8 1/2 2.2 4.5 7.1 9.7 12.5 15.3 18.2 21.1 24.1 27
8 3/4 1.6 3.8 6.2 8.7 11.4 14.2 17 19.9 22.8 25.7
9 5/8 1.5 3.5 5.7 8.1 10.6 13.3 15.9 18.7 21.5
BUILD RATESDEGREES per 100ft
Tool Size (in) Hole Size (in) .39° .78° 1.15° 1.50° 1.83° 2.12° 2.38° 2.60° 2.77° 2.90° 2.97° 3.00°
7 1/2 9 5/8 1.5 3.5 5.8 8.2 10.7 13.4 16 19.3 21.5 24.3
9 3/4 1 2 3 2 5 4 7 8 10 3 12 9 15 5 18 2 21 23 7
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 145/167
2 3/8
FIXED HOUSING
NOTE! All calculations contained herein are based on slick drilling assemblies. Addition of stabilization may significantly alter dogleg expectancies. Formation, competence, or lack thereof, may also adversely affect the accuracy of the above predictions
9 3/4 1.2 3.2 5.4 7.8 10.3 12.9 15.5 18.2 21 23.7
9 7/8 1 2.8 5 7.4 9.8 12.4 15 17.7 20.4 23.2
10 5/8 1.2 3.1 5.1 7.4 9.8 12.2 14.7 17.3 20
8 9 7/8 2.1 4.2 6.5 9 11.5 14.1 16.7 19.4 22.1 24.8
10 5/8 2.4 4.4 6.6 8.9 11.4 13.9 16.4 19 21.6
12 1/4 1 2.7 4.6 6.6 8.8 11 13.3 15.7
8 SH 9 7/8 1.6 3.9 6.6 9.4 12.4 15.5 18.7 21.9 25.2 28.4
10 5/8 1.6 3.8 6.2 8.9 11.7 14.7 17.7 20.8 23.9
12 1/4 3.2 5.4 7.9 10.4 13.1 15.8
9 5/8 12 1/4 2 3.9 6.1 8.4 10.8 13.3 15.8 18.4 21 23.7
13 1/2 1.5 3.1 5.1 7.1 9.3 11.6 14 16.4 18.9
14 3/4 1 2.5 4.3 6.2 8.2 10.4 12.6 14.9
17 1/2 1 2.6 4.2 6 7.8
11 1/4 12 1/4 4.7 6.9 9.3 11.6 14 16.3 18.7 21.1 23.5 25.9
13 1/2 3.8 5.8 7.9 10 12.3 14.5 16.8 19 21.4
14 3/4 3.3 5.1 7 9 11.1 13.2 15.4 17.6
17 1/2 3.8 5.4 13.9 9 10.9
T o o l S iz e ( i n ) H o le S i z e ( in ) 1 . 2 5 ° 1 . 5 ° 3 . 0 ° 4 . 0 °
2 1 / 1 6 2 7 / 8 1 3 . 7 1 9 . 8 5 9 . 9 8 8 . 23 3 / 8 5 . 6 1 0 . 6 4 6 . 7 7 3 . 5
3 1 / 2 4 8 . 7 4 3 . 8 7 0 . 2
2 3 / 8 3 1 / 8 1 4 . 9 2 1 . 4 6 3 . 8 9 3 . 5
3 3 / 4 4 . 1 9 4 5 7 3 . 6
4 1 / 2 - - 2 9 . 1 5 4
Tool Size (in) Hole Size (in) 0.39° 0.77° 1.11° 1.41° 1.66° 1.85° 1.96° 2°
2 3/8 3 1/8 1.8 6.7 12.7 19.2 26.1 33.3 40.6
3 1/4 0.3 4.6 10 16.2 22.8 29.7 36.8
3 7/8 0.5 4.8 9.8 15.3 21.3
4 1/2 0.8 5.1 9.8
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 146/167
PISTON DEPTHS
Tool Size Bottomed Out (In) Piston Depth (In)
“A”
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 147/167
WHEN PISTON REACHES OR EXCEEDS“PISTON DEPTH”, CHANGE OUT TOOLS
( ) p ( )
1 11/16" 13/16" 9/16"
2 1/16" 1 1/4" 1"
2 3/8" & Short 1 1/4" 1"
2 7/8" & Short 1 11/16" 1 7/16"
3 1/8" 1 3/16" 15/16"
3 3/8" 1 7/16" 1 3/16"
3 3/4" 1 7/16" 1 3/16"
4 3/4" 2 5/8" 2 3/8"
4 3/4" Short 2 11/16" 2 3/8"
5" 2 1/4" 2"
5" Series 3 2 1/4" 2"
5 1/2" 2 13/16" 2 9/16"6 1/2" Short 2 3/16" 1 15/16"
6 3/4" 2 3/16" 1 15/16"
7 1/2" 3" 2 3/4"
8" 3 1/4" 3"
8" Short 2 5/16" 2 1/16"
8" Series 3 2 5/16" 2 1/16"
9 5/8" 2 3/8" 2 1/8"
9 5/8" Short 3 11/16" 3 7/16"
11 1/4" 4 1/8" 3 7/8"
" A "
MOTOR FISHING DIMENSIONS
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 148/167
Motor Lobes Stages A B C D E F G H J K L M N P Q
1 11/16 1-2 3 - 18 - 30 81 84 - 1.67 1.67 - 1.67 1.24 1.67 0.56 1.67
1 11/16 5-6 3 - 18 - 30 93 95 - 1.67 1.67 - 1.67 1.24 1.67 0.56 1.67
1 11/16 5-6 5 - 18 - 30 126 129 - 1.67 1.67 - 1.67 1.24 1.67 0.56 1.67
2 1/16 1-2 2 - 24 - 35 95 99 - 2.06 2.06 - 2.06 1.40 2.06 0.62 2.06
2 1/16 4-5 1 - 24 - 35 72 76 - 2.06 2.06 - 2.06 1.40 2.06 1.27 2.06
2 1/16 4-5 2 - 24 - 35 101 104 - 2.06 2.06 - 2.06 1.40 2.06 1.27 2.06
2 3/8 1-2 7 - 27 42 47 102 107 - 2.37 2.37 2.62 2.37 1.47 2.37 1.14 2.37
2 3/8 2-3 4 - 27 42 47 130 137 - 2.37 2.37 2.62 2.37 1.47 2.37 1.27 2.37
2 3/8 4-5 3 - 27 42 47 102 107 - 2.37 2.37 2.62 2.37 1.47 2.37 1.28 2.37
2 3/8 5-6 2.5 - 27 42 47 102 107 - 2.37 2.37 2.62 2.37 1.47 2.37 1.33 2.37
2 7/8 1-2 5.2 - 30 48 54 162 178 - 2.87 2.87 3.03 2.93 2.01 2.87 1.59 2.87
2 7/8 2-3 7 - 30 48 54 145 151 - 2.87 2.87 3.03 2.93 2.01 2.87 1.75 2.87
2 7/8 3-4 4 - 30 48 54 109 114 - 2.87 2.87 3.03 2.93 2.01 2.87 1.68 2.87
2 7/8 5-6 3.3 - 30 48 54 109 114 - 2.87 2.87 3.03 2.93 2.01 2.87 1.66 2.87
2 7/8 7-8 2.5 - 30 48 54 109 106 - 2.87 2.87 3.03 2.93 2.01 2.87 1.85 2.87
MOTOR FISHING DIMENSIONS
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 149/167
Motor Lobes Stages A B C D E F G H J K L M N P Q
3 1/8 7-8 2.5 - 22 35 41 89 93 - 3.12 3.12 3.25 3.12 2.19 2.87 1.85 2.87
3 1/8 7-8 3 - 22 35 41 142 107 - 3.12 3.12 3.25 3.12 2.19 3.12 1.97 3.12
3 1/8 7-8 4 - 22 35 41 111 115 - 3.12 3.12 3.25 3.12 2.19 3.12 1.85 3.12
3 3/8 1-2 5 - 40 55 64 223 247 - 3.38 3.62 3.87 3.62 2.46 3.37 1.88 3.37
3 3/8 4-5 5 - 40 55 64 175 188 - 3.38 3.62 3.87 3.62 2.46 3.37 1.94 3.37
3 3/8 7-8 2.5 - 40 55 64 157 169 - 3.38 3.62 3.87 3.62 2.46 3.37 1.96 3.37
3 3/8 7-8 3 - 40 55 64 175 188 - 3.38 3.62 3.87 3.62 2.46 3.37 1.96 3.37
3 3/8 9-10 3 - 40 55 64 119 125 - 3.38 3.62 3.87 3.62 2.46 3.50 2.16 3.50
3 3/4 4-5 3.5 - 44 - 52 181 193 - 3.75 3.62 3.87 3.62 2.74 3.75 2.16 3.75
3 3/4 4-5 5 - 44 - 52 163 176 - 3.75 3.62 3.87 3.62 2.74 3.37 1.94 3.37
3 3/4 7-8 2.3 - 44 - 52 181 193 - 3.75 3.62 3.87 3.62 2.74 3.75 2.25 3.753 3/4 7-8 3 - 44 - 52 163 176 - 3.75 3.62 3.87 3.62 2.74 3.37 1.96 3.37
3 3/4 9-10 2 - 44 - 52 92 97 - 3.75 3.62 3.87 3.62 2.74 3.50 2.16 3.50
3 3/4 9-10 3 - 44 - 52 92 110 - 3.75 3.62 3.87 3.62 2.74 3.50 2.16 3.50
4 1/8 6-7 3 - 39 57 65 221 225 - 4.13 4.13 - 4.13 2.88 3.88 2.25 3.88
4 1/8 7-8 2 - 39 57 65 221 225 - 4.13 4.13 - 4.13 2.88 3.88 2.23 3.88
4 3/4 1-2 3 16 57 85 93 225 236 5.50 4.80 5.00 5.37 5.00 3.00 4.75 2.43 4.75
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 150/167
MOTOR FISHING DIMENSIONS
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 151/167
Motor Lobes Stages A B C D E F G H J K L M N P Q
5 1/2 9-10 3.4 24 65 95 103 231 237 6.25 5.53 5.53 5.75 5.53 3.65 5.50 3.49 5.53
6 1/2 1-2 4 24 70 100 116 294 302 7.13 6.56 6.56 6.87 6.75 3.53 6.50 3.43 6.56
6 1/2 4-5 4.8 24 70 100 116 255 269 7.13 6.56 6.56 6.87 6.75 3.53 6.50 4.22 6.56
6 1/2 6-7 5 24 70 100 116 310 316 7.13 6.56 6.56 6.87 6.75 3.53 6.50 4.32 6.56
6 1/2 7-8 3 24 70 100 116 232 247 7.13 6.56 6.56 6.87 6.75 3.53 6.50 4.52 6.56
6 1/2 8-9 2 24 70 100 116 195 202 7.13 6.56 6.56 6.87 6.75 3.53 6.50 4.6 6.56
6 1/2 8-9 3 24 70 100 116 232 237 7.13 6.56 6.56 6.87 6.75 3.53 6.50 4.32 6.56
6 1/2 S 1-2 4 16 53 78 94 274 280 7.13 6.56 6.56 6.87 6.75 3.65 6.50 3.43 6.56
6 1/2 S 4-5 4.8 16 53 78 94 235 247 7.13 6.56 6.56 6.87 6.75 3.65 6.50 4.22 6.56
6 1/2 S 6-7 5 16 53 78 94 288 294 7.13 6.56 6.56 6.87 6.75 3.65 6.50 4.32 6.56
6 1/2 S 7-8 2 16 53 78 94 241 247 7.13 6.56 6.56 6.87 6.75 3.65 6.50 4.52 6.56
6 1/2 S 7-8 3 16 53 78 94 212 225 7.13 6.56 6.56 6.87 6.75 3.65 6.50 4.52 6.56
6 1/2 S 8-9 2 16 53 78 94 175 180 7.13 6.56 6.56 6.87 6.75 3.65 6.50 4.60 6.56
6 1/2 S 8-9 3 16 53 78 94 212 215 7.13 6.56 6.56 6.87 6.75 3.65 6.50 4.32 6.56
6 3/4 4-5 4.8 26 71 101 117 256 270 7.13 6.75 6.75 7.00 6.75 3.50 6.75 4.22 6.75
MOTOR FISHING DIMENSIONS
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 152/167
Motor Lobes Stages A B C D E F G H J K L M N P Q
6 3/4 4-5 7 26 71 101 117 313 327 7.13 6.75 6.75 7.00 6.75 3.50 6.75 4.22 6.75
6 3/4 5-6 7 26 71 101 117 309 317 7.13 6.75 6.75 7.00 6.75 3.50 6.75 4.27 6.75
6 3/4 6-7 5 26 71 101 117 309 317 7.13 6.75 6.75 7.00 6.75 3.50 6.75 4.32 6.75
6 3/4 7-8 2 26 71 101 117 262 270 7.13 6.75 6.75 7.00 6.75 3.50 6.75 4.30 6.75
6 3/4 7-8 3 26 71 101 117 233 348 7.13 6.75 6.75 7.00 6.75 3.50 6.75 4.52 6.75
6 3/4 8-9 2 26 71 101 117 202 204 7.13 6.75 6.75 7.00 6.75 3.50 6.75 4.60 6.75
6 3/4 8-9 3 26 71 101 117 233 242 7.13 6.75 6.75 7.00 6.75 3.50 6.75 4.60 6.75
7 1/2 4-5 3.6 29 74 103 119 272 287 8.50 7.50 7.50 7.75 7.50 4.89 7.50 4.94 7.50
7 1/2 7-8 3 29 74 103 119 272 287 8.50 7.50 7.50 7.75 7.50 4.89 7.50 5.19 7.50
8 1-2 4 32 77 112 123 303 310 9.00 8.03 8.03 8.50 8.03 4.89 8.03 4.36 8.03
8 4-5 3.6 32 77 112 123 277 291 9.00 8.03 8.03 8.50 8.03 4.89 8.03 4.94 8.03
8 7-8 3 32 77 112 123 277 291 9.00 8.03 8.03 8.50 8.03 4.89 8.03 5.19 8.03
8 8-9 4 32 77 112 123 303 310 9.00 8.03 8.03 8.50 8.03 4.89 8.03 5.46 8.03
8 S 1-2 4 36 60 94 106 283 293 9.00 8.03 8.03 8.50 8.03 4.89 8.03 4.36 8.03
8 S 4-5 3.6 36 60 94 106 258 274 9.00 8.03 8.03 8.50 8.03 4.89 8.03 4.94 8.03
MOTOR FISHING DIMENSIONS
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 153/167
Motor Lobes Stages A B C D E F G H J K L M N P Q
8 S 7-8 3 36 60 94 106 258 274 9.00 8.03 8.03 8.50 8.03 4.89 8.03 5.19 8.03
8 S 8-9 4 36 60 94 106 264 276 9.00 8.03 8.03 8.50 8.03 4.89 8.03 5.46 8.03
9 5/8 2-3 7.5 25 71 108 125 329 333 12.00 10.75 9.62 9.87 9.62 6.62 9.62 6.27 9.62
9 5/8 3-4 4.5 25 71 108 125 294 303 12.00 10.75 9.62 9.87 9.62 6.62 9.62 5.98 9.62
9 5/8 4-5 4 25 71 108 125 271 279 12.00 10.75 9.62 9.87 9.62 6.62 9.62 6.21 9.62
9 5/8 5-6 3 25 71 108 125 294 303 12.00 10.75 9.62 9.87 9.62 6.62 9.62 6.24 9.62
11 1/4 3-4 3.6 - 76 123 142 332 343 12.25 11.25 11.25 11.75 11.25 7.73 11.25 9.97 11.25
Casing Dimensions and Bit Clearances(dimensions in in. unless noted otherwise)
OD Wt Wall ID OD Drift Bit Bit Clearance OD Wt Wall ID OD Drift Bit Bit Clearance
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 154/167
OD Wt. Wall ID OD Drift Bit Bit Clearance(lb/ft) Size Size
4 ½
9.5 0.205 4.090 5.000 3.965 3 7/8 3.875 0.09011.6 0.250 4.000 5.000 3.875 3 7/8 3.875 0.00013.5 0.290 3.920 5.000 3.795 3 3/4 3.750 0.04515.1 0.337 3.826 5.000 3.701 3 5/8 3.625 0.076
511.5 0.220 4.560 5.563 4.435 4 1/4 4.250 0.18513.0 0.253 4.494 5.563 4.369 4 1/4 4.250 0.11915.0 0.296 4.408 5.563 4.283 4 1/4 4.250 0.03318.0 0.362 4.276 5.563 4.151 4 1/8 4.125 0.026
5 ½13.0 0.228 5.044 6.050 4.919 4 3/4 4.750 0.16914.0 0.244 5.012 6.050 4.887 4 3/4 4.750 0.13715.5 0.275 4.950 6.050 4.825 4 3/4 4.750 0.07517.0 0.304 4.892 6.050 4.767 4 3/4 4.750 0.01720.0 0.361 4.778 6.050 4.653 4 5/8 4.625 0.02823.0 0.415 4.670 6.050 4.545 4 1/2 4.500 0.045
6
15.0 0.238 5.524 6.625 5.399 5 3/8 5.375 0.02418.0 0.288 5.425 6.625 5.299 5 1/8 5.125 0.17420.0 0.324 5.352 6.625 5.227 5 1/8 5.125 0.10223.0 0.380 5.240 6.625 5.115 4 7/8 4.875 0.24026.0 0.434 5.132 6.625 5.007 4 7/8 4.875 0.132
OD Wt. Wall ID OD Drift Bit Bit Clearance(lb/ft) Size Size
6 5/8
17.0 0.245 6.135 7.390 6.010 6 6.000 0.01020.0 0.288 6.049 7.390 5.924 5 7/8 5.875 0.04924.0 0.352 5.921 7.390 5.796 5 3/4 5.750 0.04628.0 0.417 5.791 7.390 5.666 5 5/8 5.625 0.04132.0 0.475 5.675 7.390 5.550 5 3/8 5.375 0.175
717.0 0.231 6.538 7.656 6.413 6 3/8 6.375 0.03820.0 0.272 6.456 7.656 6.331 6 1/4 6.250 0.08123.0 0.317 6.366 7.656 6.241 6 1/8 6.125 0.116
26.0 0.362 6.276 7.656 6.151 6 1/8 6.125 0.02629.0 0.408 6.184 7.656 6.059 6 6.000 0.05932.0 0.453 6.094 7.656 5.969 5 7/8 5.875 0.09435.0 0.498 6.004 7.656 5.879 5 7/8 5.875 0.00438.0 0.540 5.920 7.656 5.795 5 3/4 5.750 0.045
7 5/820.0 0.250 7.125 8.500 7.000 6 3/4 6.750 0.25024.0 0.300 7.025 8.500 6.900 6 3/4 6.750 0.150
26.4 0.328 6.969 8.500 6.844 6 3/4 6.750 0.09429.7 0.375 6.875 8.500 6.750 6 3/4 6.750 0.00033.7 0.430 6.765 8.500 6.640 6 5/8 6.625 0.01539.0 0.500 6.625 8.500 6.500 6 3/8 6.375 0.125
Casing Dimensions and Bit Clearances(dimensions in in. unless noted otherwise)
OD Wt Wall ID OD Drift Bit Bit Clearance OD Wt Wall ID OD Drift Bit Bit Clearance
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 155/167
OD Wt. Wall ID OD Drift Bit Bit Clearance(lb/ft) Size Size
8 5/8
24.0 0.2648.097 9.625 7.972 7 7/8 7.875 0.09728.0 0.3048.017 9.625 7.892 7 7/8 7.875 0.01732.0 0.3527.921 9.625 7.796 7 3/4 7.750 0.04636.0 0.4007.825 9.625 7.700 7 5/8 7.625 0.07540.0 0.4507.725 9.625 7.600 7 3/8 7.375 0.22544.0 0.5007.625 9.625 7.500 7 3/8 7.375 0.12549.0 0.5577.511 9.625 7.386 7 3/8 7.375 0.011
9 5/829.3 0.2819.063 10.625 8.907 8 3/4 8.750 0.157
32.3 0.3129.001 10.625 8.845 8 3/4 8.750 0.09536.0 0.3528.921 10.625 8.765 8 3/4 8.750 0.01540.0 0.3958.835 10.625 8.697 8 5/8 8.625 0.07243.5 0.4358.755 10.625 8.599 8 1/2 8.500 0.09947.0 0.4728.681 10.625 8.525 8 1/2 8.500 0.02553.5 0.5458.535 10.625 8.379 8 3/8 8.375 0.004
10 3/432.75 0.27910.19211.750 10.0369 7/8 9.875 0.16140.50 0.35010.05011.750 9.894 9 7/8 9.875 0.019
45.50 0.4009.950 11.750 9.794 9 3/4 9.750 0.04451.00 0.4509.850 11.750 9.694 9 5/8 9.625 0.06955.50 0.4959.760 11.750 9.604 9 9.000 0.60460.70 0.5459.660 11.750 9.504 9 9.000 0.50465.70 0.5959.560 11.750 9.404 9 9.000 0.404
OD Wt. Wall ID OD Drift Bit Bit Clearance(lb/ft) Size Size
11 3/4
38.00 0.30011.15012.750 10.99410 5/8 10.625 0.36942.00 0.33311.08412.750 10.92810 5/8 10.625 0.30347.00 0.37511.00012.750 10.84410 5/8 10.625 0.21954.00 0.43510.88012.750 10.72410 5/8 10.625 0.09960.00 0.48910.77212.750 10.6169 7/8 9.875 0.741
13 3/848.00 0.33012.71514.375 12.55912 1/4 12.250 0.30954.50 0.38012.61514.375 12.45912 1/4 12.250 0.20961.00 0.43012.51514.375 12.35912 1/4 12.250 0.109
68.00 0.48012.41514.375 12.25912 1/4 12.250 0.00972.00 0.51412.37414.375 12.19110 10.000 2.191
1655.00 0.31215.37517.000 15.18815 15.000 0.18865.00 0.37515.25017.000 15.06215 15.000 0.06275.00 0.43815.12517.000 14.93814 3/4 14.750 0.18884.00 0.49515.01017.000 14.82314 3/4 14.750 0.073
20
94.00 0.438 19.124 21.000 18.936 17 1/2 17.500 1.436
Shouldered Connection Equivalents X-REF
Common Name Size Equivalent Connection
Internal flush(IF) 23/8 27/8slimhole; NC26
Common Name Size Equivalent Connection
DoubleStreamline(DSL) 31/2 27/8extrahole
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 156/167
Internal flush (IF) 2 3/8 2 7/8 slimhole; NC 262 7/8 3 1/2 slimhole; NC 313 1/2 4 1/2 slimhole; NC 38
4 4 1/2 extra hole; NC 465 double streamline
Full hole (FH) 4 4 1/2 double streamline;NC 40
Extra hole (XH) (EH) 2 7/8 3 1/2 double streamline3 1/2 4 slimhole
4 1/2 external flush4 1/2 4 internal flush; NC 465 4 1/2 internal flush; NC 50
5 1/2 double streamline
Slimhole (SH) 2 7/8 2 3/8 internal flush; NC 263 1/2 2 7/8 internal flush; NC 314 3 1/2 extra hole
4 1/2 external flush
4 1/2 3 1/2 internal flush; NC 3
Double Streamline (DSL) 3 1/2 2 7/8 extra hole4 1/2 4 full hole; NC 405 1/2 4 1/2 internal flush
5 extra hole; NC 50
Numbered connection (NC) 26 2 3/8 internal flush2 7/8 slimhole
31 2 7/8 internal flush3 1/2 slimhole
38 3 1/2 internal flush4 1/2 slimhole
40 4 full hole4 1/2 double streamline
46 4 internal flush4 1/2 extra hole
50 4 1/2 internal flush5 extra hole5 1/2 double streamline
External flush (EF) 4 1/2 4 slimhole
3 1/2 extra hole
DRILL COLLAR WEIGHTS(lb/ft.)
D ill C ll O D C ll B (i )
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 157/167
Drill Collar O.D.
1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 13/16 3 3 1/4 3 1/2 3 3/4 4
2 7/8 19 18 16
3 21 20 183 1/8 22 22 20
3 1/4 26 24 22
3 1/2 30 29 27
3 3/4 35 33 32
4 40 39 37 35 32 29
4 1/8 43 41 39 37 35 32
4 1/4 46 44 42 40 38 35
4 1/2 51 50 48 46 43 41
4 3/4 54 52 50 47 44
Collar Bore (in.)
1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 13/16 3 3 1/4 3 1/2 3 3/4 45 61 59 56 53 50
5 1/4 68 65 63 60 57
5 1/2 75 73 70 67 64 60
5 3/4 82 80 78 75 72 67 64 60
6 90 88 85 83 79 75 72 68
6 1/4 98 96 94 91 88 83 80 76 72
6 1/2 107 105 102 99 96 91 89 85 80
6 3/4 116 114 111 108 105 100 98 93 89
7 120 117 114 110 107 103 98 93 84
7 1/4 130 127 124 119 116 112 108 103 93
1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 13/16 3 3 1/4 3 1/2 3 3/4 4
7 3/4 150 147 144 139 136 132 128 123 112
8 160 157 154 150 147 143 138 133 122
8 1/4 171 168 165 160 158 154 149 144 133
8 1/2 182 179 176 172 169 165 160 155 150
9 203 200 195 192 188 184 179 174
9 1/2 227 224 220 216 212 209 206 198
9 3/4 240 237 232 229 225 221 216 211
10 254 251 246 243 239 235 230 225
11 310 307 302 299 295 291 286 281
ANNULAR CAPACITIES
Drillpipe ∅ Hole Size Annular Capaci ty
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 158/167
Drillpipe ∅(in)
Hole Size(in)
Annular Capaci ty(gal/ft)
5 12 1/4 5.10
9 7/8 2.968 3/4 2.10
8 1/2 1.93
4 1/2 12 1/4 5.30
9 7/8 3.15
8 1/2 2.12
7 7/8 1.70
3 1/2 6 3/4 1.36
6 1/2 1.22
6 1/8 1.04
2 7/8 4 3/4 0.58
4 1/2 0.49
4 1/8 0.36
3 7/8 0.27
( )24.51
DDgal/ftcapacityannular
2
p
2
h −=
HOLE CAPACITIES
OD ft3/ft ft/ft3 bbl/ft ft/bbl gal/ft ft/gal
1 0.0055 183.3465 0.001 1029.458 0.0408 24.5109
OD ft3/ft ft/ft3 bbl/ft ft/bbl gal/ft ft/gal
7 0.2673 3.7418 0.0476 21.0093 1.9991 0.5002
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 159/167
1 1/8 0.0069 144.8664 0.0012 813.399 0.0516 19.3666
1 1/4 0.0085 117.3418 0.0015 658.8532 0.0637 15.687
1 3/8 0.0103 96.9767 0.0018 544.5068 0.0771 12.9644
1 1/2 0.0123 81.4873 0.0022 457.5369 0.0918 10.8937
1 5/8 0.0144 69.433 0.0026 389.854 0.1077 9.2822
1 3/4 0.0167 59.8682 0.003 336.1496 0.1249 8.00361 7/8 0.0192 52.1519 0.0034 292.8236 0.1434 6.972
2 0.0218 45.8366 0.0039 257.3645 0.1632 6.1277
2 1/8 0.0246 40.6027 0.0044 227.9769 0.1842 5.428
2 1/4 0.0276 36.2166 0.0049 203.3498 0.2065 4.8417
2 3/8 0.0308 32.5046 0.0055 182.5078 0.2301 4.3454
2 1/2 0.0341 29.3354 0.0061 164.7133 0.255 3.9217
2 5/8 0.0376 26.6081 0.0067 149.3998 0.2811 3.5571
2 3/4 0.0412 24.2442 0.0073 136.1267 0.3085 3.2411
2 7/8 0.0451 22.1818 0.008 124.5469 0.3372 2.9654
3 0.0491 20.3718 0.0087 114.3842 0.3672 2.7234
3 1/8 0.0533 18.7747 0.0095 105.4165 0.3984 2.5099
3 1/4 0.0576 17.3582 0.0103 97.4635 0.4309 2.3206
3 3/8 0.0621 16.0963 0.0111 90.3777 0.4647 2.1518
3 1/2 0.0668 14.9671 0.0119 84.0374 0.4998 2.00093 5/8 0.0717 13.9526 0.0128 78.3416 0.5361 1.8653
3 3/4 0.0767 13.038 0.0137 73.2059 0.5737 1.743
3 7/8 0.0819 12.2104 0.0146 68.5591 0.6126 1.6324
4 0.0873 11.4592 0.0155 64.3411 0.6528 1.5319
4 1/8 0.0928 10.7752 0.0165 60.5008 0.6942 1.4405
4 1/4 0.0985 10.1507 0.0175 56.9942 0.7369 1.357
4 3/8 0.1044 9.5789 0.0186 53.7839 0.7809 1.2806
4 1/2 0.1104 9.0541 0.0197 50.8374 0.8262 1.2104
4 5/8 0.1167 8.5713 0.0208 48.1266 0.8727 1.1459
4 3/4 0.1231 8.1262 0.0219 45.627 0.9205 1.0864
4 7/8 0.1296 7.7148 0.0231 43.3171 0.9696 1.0314
5 0.1364 7.3339 0.0243 41.1783 1.02 0.9804
5 1/8 0.1433 6.9805 0.0255 39.1941 1.0716 0.9332
5 1/4 0.1503 6.652 0.0268 37.35 1.1245 0.8893
5 3/8 0.1576 6.3462 0.0281 35.6329 1.1787 0.84845 1/2 0.165 6.061 0.0294 34.0317 1.2341 0.8103
5 5/8 0.1726 5.7947 0.0307 32.536 1.2909 0.7747
5 3/4 0.1803 5.5455 0.0321 31.1367 1.3489 0.7414
5 7/8 0.1883 5.312 0.0335 29.8259 1.4082 0.7101
6 0.1963 5.093 0.035 28.5961 1.4687 0.6809
6 1/8 0.2046 4.8872 0.0364 27.4408 1.5306 0.6534
6 1/4 0.2131 4.6937 0.0379 26.3541 1.5937 0.6275
6 3/8 0.2217 4.5114 0.0395 25.3308 1.6581 0.6031
6 1/2 0.2304 4.3396 0.041 24.3659 1.7237 0.5801
6 5/8 0.2394 4.1773 0.0426 23.4551 1.7907 0.5585
6 3/4 0.2485 4.0241 0.0443 22.5944 1.8589 0.538
6 7/8 0.2578 3.8791 0.0459 21.7803 1.9284 0.5186
7 1/8 0.2769 3.6116 0.0493 20.2786 2.0711 0.4828
7 1/4 0.2867 3.4882 0.0511 19.5854 2.1445 0.4663
7 3/8 0.2967 3.3709 0.0528 18.9271 2.219 0.4506
7 1/2 0.3068 3.2595 0.0546 18.3015 2.2949 0.4357
7 5/8 0.3171 3.1535 0.0565 17.7063 2.372 0.4216
7 3/4 0.3276 3.0526 0.0583 17.1398 2.4504 0.40817 7/8 0.3382 2.9565 0.0602 16.6 2.5301 0.3952
8 0.3491 2.8648 0.0622 16.0853 2.6111 0.383
8 1/8 0.3601 2.7773 0.0641 15.5942 2.6933 0.3713
8 1/4 0.3712 2.6938 0.0661 15.1252 2.7768 0.3601
8 3/8 0.3826 2.614 0.0681 14.6771 2.8616 0.3495
8 1/2 0.3941 2.5377 0.0702 14.2486 2.9477 0.3393
8 5/8 0.4057 2.4646 0.0723 13.8385 3.035 0.3295
8 3/4 0.4176 2.3947 0.0744 13.446 3.1236 0.3201
8 7/8 0.4296 2.3277 0.0765 13.0699 3.2135 0.3112
9 0.4418 2.2635 0.0787 12.7094 3.3047 0.3026
9 1/8 0.4541 2.2019 0.0809 12.3635 3.3971 0.2944
9 1/4 0.4667 2.1428 0.0831 12.0317 3.4908 0.2865
9 3/8 0.4794 2.0861 0.0854 11.7129 3.5858 0.2789
9 1/2 0.4922 2.0315 0.0877 11.4067 3.682 0.2716
9 5/8 0.5053 1.9791 0.09 11.1124 3.7796 0.2646
9 3/4 0.5185 1.9287 0.0923 10.8293 3.8784 0.2578
9 7/8 0.5319 1.8802 0.0947 10.5569 3.9785 0.2514
10 0.5454 1.8335 0.0971 10.2946 4.0798 0.2451
10 1/8 0.5591 1.7885 0.0996 10.042 4.1824 0.2391
10 1/4 0.573 1.7451 0.1021 9.7985 4.2864 0.2333
10 3/8 0.5871 1.7033 0.1046 9.5638 4.3915 0.2277
10 1/2 0.6013 1.663 0.1071 9.3375 4.498 0.2223
10 5/8 0.6157 1.6241 0.1097 9.1191 4.6057 0.2171
10 3/4 0.6303 1.5866 0.1123 8.9082 4.7147 0.2121
10 7/8 0.645 1.5503 0.1149 8.7046 4.825 0.2073
11 0.66 1.5153 0.1175 8.5079 4.9366 0.2026
11 1/8 0.675 1.4814 0.1202 8.3178 5.0494 0.198
11 1/4 0.6903 1.4487 0.1229 8.134 5.1635 0.1937
11 3/8 0.7057 1.417 0.1257 7.9562 5.2789 0.189411 1/2 0.7213 1.3864 0.1285 7.7842 5.3956 0.1853
11 5/8 0.7371 1.3567 0.1313 7.6177 5.5135 0.1814
11 3/4 0.753 1.328 0.1341 7.4565 5.6327 0.1775
11 7/8 0.7691 1.3002 0.137 7.3003 5.7532 0.1738
12 0.7854 1.2732 0.1399 7.149 5.8749 0.1702
12 1/8 0.8018 1.2471 0.1428 7.0024 5.998 0.1667
12 1/4 0.8185 1.2218 0.1458 6.8602 6.1223 0.1633
12 3/8 0.8353 1.1972 0.1488 6.7223 6.2479 0.1601
12 1/2 0.8522 1.1734 0.1518 6.5885 6.3747 0.1569
12 5/8 0.8693 1.1503 0.1548 6.4587 6.5028 0.1538
12 3/4 0.8866 1.1279 0.1579 6.3327 6.6323 0.1508
12 7/8 0.9041 1.1061 0.161 6.2103 6.7629 0.1479
DISPLACEMENT & CAPACITY
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 160/167
OD
(in)
ID
(in)
NOMINALWEIGHT
(lb/ft)
STEELDISPLACEMENT
(gal/ft)
CAPACITY
(gal/ft)
2 3/8 1.815 6.65 0.10542 0.13440
2 7/8 2.151 10.40 0.16674 0.18858
3 1/2 2.764 13.30 0.21084 0.31164
3 1/2 2.602 15.50 0.24486 0.27636
4 3.340 14.00 0.23100 0.455284 1/2 3.826 16.60 0.27510 0.59724
4 1/2 3.640 20.00 0.32676 0.54054
5 4.276 19.50 0.31500 0.74592
5 4.000 25.60 0.39144 0.65268
STANDARD HEAVY-WALLDRILLPIPE PROPERTIES
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 161/167
NominalSize(in.)
PipeID
(in.)
NominalWeight(lb./ft.)
Tool JointConnection
3 1/2 2.063 25.3 3 1/2 IF or NC 38
4 2.563 29.7 4 FH or NC 40
4 1/2 2.750 39.9 4 IF or NC 46
5 3.000 48.5 4 1/2 IF or NC 50
SPIRAL-WATETM HEAVY-WALLDRILLPIPE PROPERTIES
NominalSize(in.)
PipeID
(in.)
NominalWeight(lb./ft.)
Tool JointConnection
3 1/2 2.125 28.3 3 1/2 IF or NC 38
4 2.563 33.8 4 FH or NC 404 1/2 2.750 44.0 4 IF or NC 46
5 3.000 55.3 4 1/2 IF or NC 50
5 1/2 3.250 63.0 5 FH
6 5/8 5.000 57.0 6 5/8 FH
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 162/167
NOZZEL FLOW AREAS(IN2)
Nozzle Size 1 2 3 4 5 6 7 8 9 10
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 163/167
(32nds)1 2 3 4 5 6 7 8 9 10
17 .221 .442 .663 .884 1.105 1.326 1.547 1.768 - -
18 .249 .498 .747 .996 1.245 1.494 1.743 - - -
20 .307 .614 .921 1.228 1.535 - - - - -
22 .371 .742 1.113 1.484 - - - - - -
24 .441 .882 1.323 1.764 - - - - - -
26 .519 1.038 1.557 - - - - - - -
28 .601 1.202 - - - - - - - -
30 .690 1.380 - - - - - - - -
1” .785 1.570 - - - - - - - -
1 1/8” .994 - - - - - - - - -
1 1/4” 1.227 - - - - - - - - -
MUD WEIGHT
lb/gal lb/ft3 kg/m3
Specific
Gravity
Gradient
Depth
(psi/ft)
Gradient
Depth
(kPa/m) lb/gal lb/ft3 kg/m3
Specific
Gravity
Gradient
Depth
(psi/ft)
Gradient
Depth
(kPa/m) lb/gal lb/ft3 kg/m3
Specific
Gravity
Gradient
Depth
(psi/ft)
Gradient
Depth
(kPa/m)
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 164/167
8.34 62.38 999.3 1 0.434 9.8
8.5 63.58 1018.5 1.02 0.442 10
8.6 64.32 1030.5 1.03 0.447 10.1
8.7 65.07 1042.4 1.04 0.452 10.2
8.8 65.82 1054.4 1.05 0.458 10.4
8.9 66.57 1066.4 1.07 0.463 10.5
9 67.31 1078.4 1.08 0.468 10.6
9.1 68.06 1090.4 1.09 0.473 10.7
9.2 68.81 1102.3 1.1 0.478 10.8
9.3 69.56 1114.3 1.12 0.484 10.9
9.4 70.31 1126.3 1.13 0.489 11.1
9.5 71.05 1138.3 1.14 0.494 11.2
9.6 71.8 1150.3 1.15 0.499 11.3
9.7 72.55 1162.3 1.16 0.504 11.4
9.8 73.3 1174.2 1.18 0.51 11.5
9.9 74.05 1186.2 1.19 0.515 11.6
10 74.79 1198.2 1.2 0.52 11.8
10.1 75.54 1210.2 1.21 0.525 11.9
10.2 76.29 1222.2 1.22 0.53 12
10.3 77.04 1234.2 1.24 0.536 12.1
10.4 77.79 1246.1 1.25 0.541 12.2
10.5 78.53 1258.1 1.26 0.546 12.4
10.6 79.28 1270.1 1.27 0.551 12.5
10.7 80.03 1282.1 1.28 0.556 12.6
10.8 80.78 1294.1 1.29 0.562 12.7
10.9 81.53 1306 1.31 0.567 12.8
11 82.27 1318 1.32 0.572 12.9
11.1 83.02 1330 1.33 0.577 13.1
11.2 83.77 1342 1.34 0.582 13.2
11.3 84.52 1354 1.36 0.588 13.3
11.4 85.27 1366 1.37 0.593 13.411.5 86.01 1377.9 1.38 0.598 13.5
11.6 86.76 1389.9 1.39 0.603 13.6
11.7 87.51 1401.9 1.4 0.608 13.8
11.8 88.26 1413.9 1.41 0.614 13.9
11.9 89.01 1425.9 1.43 0.619 14
12 89.75 1437.8 1.44 0.624 14.1
12.1 90.5 1449.8 1.45 0.629 14.2
12.2 91.25 1461.8 1.46 0.634 14.4
12.3 92 1473.8 1.48 0.64 14.5
12.4 92.74 1485.8 1.49 0.645 14.6
12.4 92.74 1485.8 1.49 0.645 14.6
12.5 93.49 1497.8 1.5 0.65 14.7
12.6 94.24 1509.7 1.51 0.655 14.8
12.7 94.99 1521.7 1.52 0.66 14.912.8 95.74 1533.7 1.53 0.666 15.1
12.9 96.48 1545.7 1.55 0.671 15.2
13 97.23 1557.7 1.56 0.676 15.3
13.1 97.98 1569.6 1.57 0.681 15.4
13.2 98.73 1581.6 1.58 0.686 15.5
13.3 99.48 1593.6 1.6 0.692 15.6
13.4 100.22 1605.6 1.61 0.697 15.8
13.5 100.97 1617.6 1.62 0.702 15.9
13.6 101.72 1629.6 1.63 0.707 16
13.7 102.47 1641.5 1.64 0.712 16.1
13.8 103.22 1653.5 1.65 0.718 16.2
13.9 103.96 1665.5 1.67 0.723 16.4
14 104.71 1677.5 1.68 0.728 16.514.1 105.46 1689.5 1.69 0.733 16.6
14.2 106.21 1701.5 1.7 0.738 16.7
14.3 106.96 1713.4 1.72 0.744 16.8
14.4 107.7 1725.4 1.73 0.749 16.9
14.5 108.45 1737.4 1.74 0.754 17.1
14.6 109.2 1749.4 1.75 0.759 17.2
14.7 109.95 1761.4 1.76 0.764 17.3
14.8 110.7 1773.3 1.78 0.77 17.4
14.9 111.44 1785.3 1.79 0.775 17.5
15 112.19 1797.3 1.8 0.78 17.6
15.1 112.94 1809.3 1.81 0.785 17.8
15.2 113.69 1821.3 1.82 0.79 17.9
15.3 114.44 1833.3 1.84 0.796 1815.4 115.18 1845.2 1.85 0.801 18.1
15.5 115.93 1857.2 1.86 0.806 18.2
15.6 116.68 1869.2 1.87 0.811 18.3
15.7 117.43 1881.2 1.88 0.816 18.5
15.8 118.18 1893.2 1.9 0.822 18.6
15.9 118.92 1905.1 1.91 0.827 18.7
16 119.67 1917.1 1.92 0.832 18.8
16.1 120.42 1929.1 1.93 0.837 18.9
16.2 121.17 1941.1 1.94 0.842 19.1
16.3 121.91 1953.1 1.96 0.848 19.2
g g y (p ) ( )
16.4 122.66 1965.1 1.97 0.853 19.3
16.5 123.41 1977 1.98 0.858 19.4
16.6 124.16 1989 2 0.863 19.5
16.7 124.91 2001 2.01 0.868 19.616.8 125.65 2013 2.02 0.874 19.8
16.9 126.4 2025 2.03 0.879 19.9
17 127.15 2036.9 2.04 0.884 20
17.1 127.9 2048.9 2.05 0.889 20.1
17.2 128.65 2060.9 2.06 0.894 20.2
17.3 129.39 2072.9 2.08 0.9 20.3
17.4 130.14 2084.9 2.09 0.905 20.5
17.5 130.89 2096.9 2.1 0.91 20.6
17.6 131.64 2108.8 2.11 0.915 20.7
17.7 132.39 2120.8 2.12 0.92 20.8
17.8 133.13 2132.8 2.14 0.926 20.9
17.9 133.88 2144.8 2.15 0.931 21.118 134.63 2156.8 2.16 0.936 21.2
18.1 135.38 2168.8 2.17 0.941 21.3
18.2 136.13 2180.7 2.18 0.946 21.4
18.3 136.87 2192.7 2.2 0.952 21.5
18.4 137.62 2204.7 2.21 0.957 21.6
18.5 138.37 2216.7 2.22 0.962 21.8
18.6 139.12 2228.7 2.23 0.967 21.9
18.7 139.87 2240.6 2.24 0.972 22
18.8 140.61 2252.6 2.26 0.978 22.1
18.9 141.36 2264.6 2.27 0.983 22.2
19 142.11 2276.6 2.28 0.988 22.3
19.1 142.86 2288.6 2.29 0.993 22.519.2 143.61 2300.6 2.3 0.998 22.6
19.3 144.35 2312.5 2.32 1.004 22.7
19.4 145.1 2324.5 2.33 1.009 22.8
19.5 145.85 2336.5 2.34 1.014 22.9
19.6 146.6 2348.5 2.35 1.019 23.1
19.7 147.34 2360.5 2.36 1.024 23.2
19.8 148.09 2372.4 2.38 1.03 23.3
19.9 148.84 2384.4 2.39 1.035 23.4
20 149.59 2396.4 2.4 1.04 23.5
PREFIXES
Multiplying Factor Prefix
Symbol
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 165/167
1 000 000 = 106 mega M
1 000 = 103 kilo k
100 = 102 hecto h
10 = 101 deca da
0.1 = 10-1 deci d
0.01 = 10-2 centi c
0.001 = 10-3 milli m
0.000 001 = 10-6 micro µ
CONVERSIONS
UNITS MULTIPLY BY TO OBTAIN
ac 43560 ft2
4047 2
UNITS MULTIPLY BY TO OBTAIN
ft 1.89394 x 10-4 mift2 0 0929 2
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 166/167
ac 4047 m2
ac 0.001562 mi2
atm 33.94 ft of water atm 14.7 lb/in2
atm 1.013 x 105 pascalsatm 1.033 kg/cm2
bbl (British, dry) 5.78 ft3
bbl (British, dry) 0.1637 m3
bbl (British, dry) 36 gal(British)bbl, cement 170.6 kg
bbl, cement 376 lb(cement)bbl, oil 42 gal (U.S.)bbl (U.S., liquid) 4.211 ft3
bbl (U.S., liquid) 0.1192 m3
bbl (U.S., liquid) 31.5 gal (U.S.)bbl/min 42 gal/minbbl/day 0.02917 gal/mincm3 3.531 x 10-5 ft3
deg (angle) 60 mindeg (angle) 0.01745 raddeg (angle) 3600 sdeg/s 0.1667 rpmdeg/s 2.778 x 10-3 rev/sdaN 2.2467 lbsft 12 inft 0.3048 m
ft2 0.0929 m2
ft3 1728 in3
ft
3
0.02832 m
3
ft3 7.481 gal (U.S.)ft3 28.32 litersft3 of water (60 deg. F) 62.37 lbft3/min 4.72 x 10-4 m3/sft3/min 0.1247 gal/sft3/min 0.472 liters/sft3/s 448.83 gal/minft3- atm 2116.3 ft-lb
ft-lb 1.286 x 10-3
Btuft-lb 0.1383 Kg-mft-lb 1.355818 N mft/min 0.508 cm/sft/min 0.01667 ft/sft/min 0.01829 km/hr ft/min 0.3048 m/minft/min 0.01136 mi/hr ft-lb/min 0.01667 ft-lb/sft-lb/min 2.26 x 10-5 KWft-lb/s 1.356 x 10-3 KWft-lb/s 1.818 x 10-3 hpg 0.001 kggal (British) 1.20094 gal (U.S.)gal 3785 cm3
gal 0.1337 ft3
gal 231 in3
CONVERSIONS
UNITS MULTIPLY BY TO OBTAIN
gal 3.785 litersgal/min 2 228 x 10-3 ft3/s
UNITS MULTIPLY BY TO OBTAIN
lb/gal .1198 g/cm3
lb/in2 6 894757 kPa
8/20/2019 BlkMax
http://slidepdf.com/reader/full/blkmax 167/167
gal/min 2.228 x 10 3 ft3/sgal/min 3.785 liters/min
g-cm
2
3.4172 x 10
-4
lb-in
2
hp 0.7457 kWin 25.4 mmin2 645.2 mm2
in2 6.452 cm2
in2 6.944 x 10-3 ft2
in3 1.639 x 10-5 m3
in3 5.787 x 10-4 ft3
in3 4.329 x 10-3 gal
in3
0.01639 literskg 2.2046 lbkg-m 7.233 ft-lbkg/m3 0.06243 lb/ft3
kg/m 0.672 lb/ftkW 44250 ft-lb/minkW-hr 2.655 x 106 ft-lblb 4.45 x 105 dyneslb 4.448 newtonslb 4.535 x 10-4 tons(metric)lb/ft3 16.02 kg/m3
lb/ft3 5 787 x 10-4 lb/in3
lb/in2 6.894757 kPaliter 0.03531 ft3
liter 0.001 m
3
liter 0.2642 galm 3.2808 ftm2 10.764 ft2
m3 264.2 galm3/s 15850 gal/minm3/s 60000 liters/minmi 2 2.788 x 107 ft2
mi 2 2.59 km2
rad 57.3 degrad/s 0.1592 rev/srad/s 9.549 rpmtemp. (°C) 1.8 (°C)+32 temp.°Ftemp. (°F) (°F - 32) 5/9 temp.°Ctons (metric) 1000 kgwatts 0.7376 ft-lb/swatts 1.341 x 10-3 hpyds 3 ftyds 0.9144 m