Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Blue® 2 3/8" TO 13 5/8"
3
PREM
IUM
CO
NN
ECTI
ON
SBL
UE®
Tena
risH
ydril
TenarisHydril offers outstanding premium connection design and technology worldwide. With a comprehensive range of high performance products backed by an extensive global fieldservice network and licensed threading shops, we develop solutions to meet the needs of ever more demanding E&P environments.
TenarisHydril
TenarisHydril premium connections are sup-plied and supported by Tenaris, the leading manufacturer and supplier of steel tubes and integrated tubular services to the world's energy industry.
For further information please visit our website at www.tenaris.com.
4
Main attributes
SIZE AVAILABILITY
2 3/8" TO 13 5/8"
FEATURES
Designed for high performance and versatility. ISO 13679 CAL IV tested and field proven.Parabolic seal contact pressure profile minimizes galling risk while improves sealing performance stability.70 ISO 13679 CAL IV testsInstalled in 70 countriesChosen by 200 operators7 million feet installed with Dopeless® technology
APPLICATIONS
Deepwater HP/HT & Deep wellsHorizontal & extended reach wellsShalesCasing while drillingThermal ApplicationsGeothermalSurface & intermediate casingProduction casing, tie-backs and linersTubing
OPTIONS
Dopeless® technologyMatched strengthSpecial bevelSpecial clearance
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5
PREM
IUM
CO
NN
ECTI
ON
SBL
UE®
Tena
risH
ydril
Easy make-up is developed with the rugged, coarse pitch thread and steep taper for deep stabbing.
.
Superior compression strength obtained by optimized torque shoulder and controlled 25 degree stab flank reduced clearance.
.
100% internal and external pressure metal seal.Toroidal design generates stable seal behavior for all combined-load conditions.Dope pocket accommodates excess of thread compound for efficient and reliable make-up.
.
.
.
1
2
3
Operational solutions
3
2
1
6 6
Seal design
BEHAVIOR UNDER EXTREME COMBINED LOADS
The sphere-to-cone seal geometry (toroidal surface on the pin, tapered surface on the box) achieves the parabolic seal contact pressure profile. This provides lower contact pressure peaks (minimizing galling risks during make-up) but higher average contact pressure in combination with longer seal contact length. When combined, these two characteristics provide a more stable sealing performance even under extreme combined loads. This presents 100% PIPY gas-tightness and 100% API collapse pressure (or 100% PEPY gas-tightness).
As achieved in the thread design, and incombination with taper and pitch parameters, seal configuration was optimized to ensurethe best sealing performance while preserving seal integrity.
PIN
BOX
RA
DIU
S
DOPE POCKET
TANGENT POINT (SEALING POINT)
Safer make-up
The main seal contact point set apart from pin end provides seal protection while running and less sensitivity of the sealing capacity to axial displacement that could be reached under extreme loads.
Deep stabbing reduces sliding distance and risk of galling.
Dope pocket
When used with dope, the “Dope pocket” volume accommodates excess of thread compound, thus minimizing both thread integrity (pin) risk and weaker sealing performance due to dope entrapment. The cylindrical crests of the box thread close to the dope pocket allow the surplus dope to flow from the threads to the dope pocket.
7
PREM
IUM
CO
NN
ECTI
ON
SBL
UE®
Tena
risH
ydril
Stable contact pressures for all loading conditions
The TSH Blue® connection's performance matches the pipe body's performance in terms of tension, compression, internal and external pressures. This is clearly seen overlapping the connection service envelope (CSE) to the Von Mises Ellipse of the pipe body.
Connection performance validation is done according to the ISO 13679 CAL IV specification, over the 14 different loading points that are
defined on the ellipse (95% of the VME of the pipe body) not only for design verification, but also for customer qualification.
Sealing performance is evaluated in each ofthe quadrants by plotting the seal contact pressure along the seal length for each of the loading points.
100% PB VME=CSE 95% CSE
TEST LOAD ENVELOPE 100% API COLLAPSE
LOADING POINTS (LP)
INTERNAL PRESSURE
100% PIPY
100% PBYS-100% PBYS
-100% PEPY
100% APY CP
5
6
7
43
2
1
14
1312
MU
00-50
8&9
50
50
50
1110
EXTERNAL PRESSURE
COM
PRES
SION
TENS
ION
AB
DC
LOADING POINTS 8&9 LOADING POINT 10 LOADING POINT 11
LOADING POINT 12
LOADING POINT 1
LOADING POINT 14
LOADING POINT 12 LOADING POINT 13
SEAL
CO
NTA
CTPR
ESSU
RE
SEAL LENGTH
MAKE-UP LOADING POINT 1 LOADING POINT 2 LOADING POINT 3
LOADING POINT 4 LOADING POINT 5
MAKE-UP
LOADING POINT 5 LOADING POINT 6 LOADING POINT 7
LOADING POINTS 8&9
SEAL
CO
NTA
CTPR
ESSU
RE
SEAL LENGTH
SEAL
CO
NTA
CTPR
ESSU
RE
SEAL LENGTH
SEAL
CO
NTA
CTPR
ESSU
RE
SEAL LENGTH
QUADRANT A
Contact pressure under internal pressure and tension.
SERVICE ENVELOPE
FOR BLUE®
In each of the ISO 13679 CAL IV 14 loading points the integrity and intensity of the contact pressures in the metal-to-metal seal are checked, so as to ensure the sealing capacity of the connection.
8
LOADING POINTS 8&9 LOADING POINT 10 LOADING POINT 11
LOADING POINT 12
LOADING POINT 1
LOADING POINT 14
LOADING POINT 12 LOADING POINT 13
SEAL
CO
NTA
CTPR
ESSU
RE
SEAL LENGTH
MAKE-UP LOADING POINT 1 LOADING POINT 2 LOADING POINT 3
LOADING POINT 4 LOADING POINT 5
MAKE-UP
LOADING POINT 5 LOADING POINT 6 LOADING POINT 7
LOADING POINTS 8&9
SEAL
CO
NTA
CTPR
ESSU
RE
SEAL LENGTH
SEAL
CO
NTA
CTPR
ESSU
RE
SEAL LENGTH
SEAL
CO
NTA
CTPR
ESSU
RE
SEAL LENGTH
LOADING POINTS 8&9 LOADING POINT 10 LOADING POINT 11
LOADING POINT 12
LOADING POINT 1
LOADING POINT 14
LOADING POINT 12 LOADING POINT 13
SEAL
CO
NTA
CTPR
ESSU
RE
SEAL LENGTH
MAKE-UP LOADING POINT 1 LOADING POINT 2 LOADING POINT 3
LOADING POINT 4 LOADING POINT 5
MAKE-UP
LOADING POINT 5 LOADING POINT 6 LOADING POINT 7
LOADING POINTS 8&9
SEAL
CO
NTA
CTPR
ESSU
RE
SEAL LENGTH
SEAL
CO
NTA
CTPR
ESSU
RE
SEAL LENGTH
SEAL
CO
NTA
CTPR
ESSU
RE
SEAL LENGTH
LOADING POINTS 8&9 LOADING POINT 10 LOADING POINT 11
LOADING POINT 12
LOADING POINT 1
LOADING POINT 14
LOADING POINT 12 LOADING POINT 13
SEAL
CO
NTA
CTPR
ESSU
RE
SEAL LENGTH
MAKE-UP LOADING POINT 1 LOADING POINT 2 LOADING POINT 3
LOADING POINT 4 LOADING POINT 5
MAKE-UP
LOADING POINT 5 LOADING POINT 6 LOADING POINT 7
LOADING POINTS 8&9
SEAL
CO
NTA
CTPR
ESSU
RE
SEAL LENGTH
SEAL
CO
NTA
CTPR
ESSU
RE
SEAL LENGTH
SEAL
CO
NTA
CTPR
ESSU
RE
SEAL LENGTH
QUADRANT D
Contact pressure under external pressure and tension.
QUADRANT C
Contact pressure under external pressure and compression.
QUADRANT B
Contact pressure under internal pressure and compression.
THICKER PIN NOSE
9
PREM
IUM
CO
NN
ECTI
ON
SBL
UE®
Tena
risH
ydril
Thread design
IMPROVED COMPRESSION
AND OVER TORQUE CAPACITY
The proper combination of the thread con-figuration (reduced stabbing flank gaps and optimized stabbing flank angle) and the thicker negative torque shoulder section provides 100% compression ratings as well as high over-torque capacity (normally 250% of maximum torque).
Improved running
Thread parameters such as thread taper and thread pitch were also optimized in order to provide the best running response in terms of simplicity and safety (deep stabbing, low cross-threading risk, reduced turns to make-up
PIN
BOX
position). This is achieved by using two different tapers and two different thread pitches thatallow to cover the whole range (from 2 3/8"to 13 5/8").
Tensile capacity
Optimized positive run-out load flank angle, able to equalize pipe body tensile capacity while providing better manufacturing and repairing conditions (compared to hooked thread pro-files).
REDUCED THREAD GAP (STABBING FLANK)
NEGATIVE TORQUE SHOULDER
POSITIVELOAD FLANK
PIN
BOX
Technical data table &Torque table for Blue®
12
DESIGNATION
4.605.105.806.306.607.356.407.808.609.359.8010.5010.707.709.2010.2012.7013.7014.3014.7015.508.209.5010.9013.2014.8516.1016.5018.9010.5011.6012.6013.5015.2016.6017.0017.7018.9021.5013.0015.0018.0020.3020.8021.4023.2024.1026.70
CONNECTION INSIDE
DIAMETERWall Thickness
PIPE BODY
Inside Diameter
Standard Drift Diameter
Special Drift Diameter
COUPLING
OutsideDiameter
Length
MAKE-UP LOSS
CRITICAL SECTION
AREA
2 3/8
2 7/8
3 1/2
4
4 1/2
5
0.1900.2180.2540.2800.2950.3360.2170.2760.3080.3400.3620.3920.4050.2160.2540.2890.3750.4130.4300.4490.4760.1900.2260.2620.3300.3800.4150.4300.5000.2240.2500.2710.2900.3370.3750.3800.4020.4300.5000.2530.2960.3620.4080.4220.4370.4780.5000.562
1.9951.9391.8671.8151.7851.7032.4412.3232.2592.1952.1512.0912.0653.0682.9922.9222.7502.6742.6402.6022.5483.6203.5483.4763.3403.2403.1703.1403.0004.0524.0003.9583.9203.8263.7503.7403.6963.6403.5004.4944.4084.2764.1844.1564.1264.0444.0003.876
2.7762.7762.8272.8462.8622.9133.3073.3463.3863.4373.4493.4883.5043.9373.9374.0164.1504.1504.1694.1934.2284.4414.4414.4414.5674.6104.6614.6814.7764.9214.9214.9615.0005.0475.1065.1145.1465.1895.2875.5125.5125.6305.6505.6735.6935.7565.7875.874
5.9065.9065.9065.9065.9065.9067.2057.2057.2057.2057.2057.2057.2058.2288.2288.2288.2288.2288.2288.2288.2288.7808.7808.7808.7808.7808.7808.7808.7809.2139.2139.2139.2139.2139.2139.2139.2139.2139.21310.55110.55110.55110.55110.55110.55110.55110.55110.551
1.9471.9151.8681.8331.8371.7972.4062.3392.2762.2282.2092.1852.1613.0162.9692.9062.7992.7722.7362.7202.7203.5373.4743.4313.3563.2813.2623.2343.0933.9963.9573.9173.8783.8233.7993.7913.7683.7403.6024.4214.3504.2644.2094.1934.1854.1344.0913.969
2.6552.6552.6552.6552.6552.6553.2023.2023.2023.2023.2023.2023.2023.6163.6163.6163.6163.6163.6163.6163.6163.8053.8053.8053.8053.8053.8053.8053.8054.0124.0124.0124.0124.0124.0124.0124.0124.0124.0124.5794.5794.5794.5794.5794.5794.5794.5794.579
inin in
1.3041.4771.6931.8431.9282.1531.8122.2542.4832.7082.8583.0583.1432.2292.5902.9163.6814.0054.1484.3044.5212.2742.6803.0773.8054.3214.6734.8225.4983.0093.3393.6013.8364.4084.8604.9185.1755.4986.2843.7734.3745.2755.8856.0706.2656.7917.0687.835
in in in in in
Size
in
Nominal Weight
lb/ft
Technical data table 2 3/8" TO 5"
Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for the connection correspond to the lighter weight (for more information consult TenarisHydril Running Manual).Compression efficiency for SC and MS options is the same as the standard connection.For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option.
1.9011.8451.7731.7211.6911.6092.3472.2292.1652.1012.0571.9971.9712.9432.8672.7972.6252.5492.5152.4772.4233.4953.4233.3513.2153.1153.0453.0152.8753.9273.8753.8333.7953.7013.6253.6153.5713.5153.3754.3694.2834.1514.0594.0314.0013.9193.8753.751
—————————————————————————————————
3.750——————————————
.
..
sq in
13
PREM
IUM
CO
NN
ECTI
ON
SBL
UE®
Tena
risH
ydril
100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100
2.6462.6812.7202.7522.7682.8113.1613.2363.2763.3113.3353.3703.3823.7723.8233.8703.9764.0204.0354.0594.0874.2764.2874.3354.4254.4884.5314.5474.6304.7804.8154.8464.8704.9334.9924.9925.0205.0515.1385.3155.3545.4455.5085.5245.5435.5945.6225.693
2.7052.7442.7952.8312.8502.9023.2283.3193.3663.4093.4373.4763.4923.8433.9063.9614.0874.138
———
4.2994.3624.4214.528
————
4.8544.8984.9334.965
——————
5.3825.4535.5635.6345.6575.6775.7405.7725.858
1.1141.2631.4311.5661.6341.8231.5391.9142.1162.2992.4232.6092.6721.8942.1992.4853.1403.4133.5123.6633.8382.2092.2882.6073.2303.6723.9794.0904.6872.5622.8293.0673.2473.7324.1664.1934.4104.6595.3523.3773.7084.4755.0175.1545.3245.7726.0166.645
85.086.085.085.085.085.085.085.085.085.085.085.085.085.085.085.085.085.085.085.085.097.085.085.085.085.085.085.085.085.085.085.085.085.085.085.085.085.085.090.085.085.085.085.085.085.085.085.0
104.3118.2135.4147.4154.3172.2145.0180.3198.6216.6228.7244.7251.5178.3207.2233.2294.5320.4331.8344.3361.7181.9214.4246.1304.4345.7373.9385.8439.8240.7267.1288.1306.9352.7388.8393.5414.0439.8502.7301.8349.9422.0470.8485.6501.2543.2565.4626.8
71.781.293.1101.4106.1118.499.7124.0136.6148.9157.2168.2172.9122.6142.5160.4202.5220.3228.1236.7248.7125.1147.4169.2209.3237.7257.0265.2302.4165.5183.6198.0211.0242.5267.3270.5284.7302.4345.6207.5240.6290.1323.7333.8344.6373.5388.7430.9
117.3132.9152.3165.9173.5193.8163.1202.8223.5243.7257.2275.2282.9200.6233.1262.4331.3360.5373.3387.4406.9204.6241.2276.9342.5388.9420.6434.0494.8270.8300.5324.1345.3396.7437.4442.6465.8494.8565.5339.5393.7474.7529.7546.3563.9611.2636.1705.2
123.8140.3160.8175.1183.2204.5172.1214.1235.9257.2271.5290.5298.6211.7246.1277.0349.7380.5394.0408.9429.5216.0254.6292.3361.5410.5444.0458.1522.3285.8317.2342.1364.4418.8461.7467.2491.7522.3597.0358.4415.5501.1559.1576.6595.2645.1671.5744.4
143.4162.5186.2202.7212.1236.8199.3247.9273.1297.9314.4336.4345.8245.2284.9320.7404.9440.6456.3473.5497.3250.1294.8338.4418.6475.4514.1530.4604.8330.9367.3396.1422.0484.9534.6541.0569.3604.8691.2415.0481.2580.2647.4667.7689.2747.0777.5861.9
162.9184.6211.6230.4241.0269.1226.5281.7310.4338.5357.3382.3392.9278.6323.8364.4460.2500.7518.5538.0565.2284.2335.0384.6475.7540.2584.2602.8687.2376.1417.3450.1479.5551.0607.5614.8646.9687.2785.5471.6546.8659.3735.7758.7783.1848.8883.5979.4
COMPRESSION EFFICIENCY
%
JOINT YIELD STRENGTH
OutsideDiameter
OutsideDiameter
Critical Section Area
TensileEfficiency
SPECIAL CLEARANCE COUPLING
OPTIONS
MATCHED STRENGTH
in inx 1000 lb sq in %
55 ksi 80 ksi 90 ksi 95 ksi 110 ksi 125 ksi
TENSILE EFFICIENCY
100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100
%
14
DESIGNATION
15.5017.0020.0023.0026.0026.8028.4029.7032.6020.0023.2024.0028.0032.0035.0036.7023.0024.7526.0029.0032.0035.0038.0041.0029.7033.7035.8039.0042.8045.3046.1047.6048.6051.8056.1036.0040.0044.0049.0052.0054.0058.7036.0040.0043.5047.0053.5058.4059.4061.1064.9070.30
CONNECTION INSIDE
DIAMETERWall Thickness
PIPE BODY
Inside Diameter
COUPLING
OutsideDiameter
Length
MAKE-UP LOSS
CRITICAL SECTION
AREA
5 1/2
6 5/8
7
7 5/8
7 3/4
8 5/8
9 5/8
0.2750.3040.3610.4150.4760.5000.5300.5620.6250.2880.3300.3520.4170.4750.5250.5620.3170.3430.3620.4080.4530.4980.5400.5900.3750.4300.4650.5000.5620.5950.5950.6250.6400.6870.7500.4000.4500.5000.5570.5950.6250.6870.3520.3950.4350.4720.5450.5950.6090.6250.6720.734
4.9504.8924.7784.6704.5484.5004.4404.3764.2506.0495.9655.9215.7915.6755.5755.5016.3666.3146.2766.1846.0946.0045.9205.8206.8756.7656.6956.6256.5016.4356.5606.5006.4706.3766.2507.8257.7257.6257.5117.4357.3757.2518.9218.8358.7558.6818.5358.4358.4078.3758.2818.157
6.0636.0636.1026.1816.3076.3076.3506.3826.4697.2837.2837.2837.3907.4097.4927.5397.6777.6777.6777.6777.7327.8077.8707.9498.4258.4658.4658.4968.5398.5918.7408.7408.7728.8438.9379.4889.4889.4889.6269.6269.6389.73610.62610.62610.62610.62610.62610.62610.62610.65410.72810.827
10.74810.74810.74810.74810.74810.74810.74810.74810.74810.55110.55110.55110.55110.55110.55110.55110.55110.55110.55110.55110.55110.55110.55110.55110.66910.66910.66910.66910.66910.66911.49611.49611.49611.49611.49611.69311.69311.69311.69311.69311.69311.69311.69311.69311.69311.69311.69311.69311.69311.69311.69311.693
4.9114.8604.7894.6954.6164.5894.5304.5064.4275.9735.8945.8555.7495.6785.6195.6236.2876.2286.1896.1186.0636.0125.9695.8906.8016.6996.6596.6046.5536.5616.6916.6326.6006.5066.3807.7877.7097.6507.5357.4967.4377.3908.8298.7818.7118.6598.5458.4948.5538.5148.4358.356
4.6774.6774.6774.6774.6774.6774.6774.6774.6774.4804.4804.4804.4804.4804.4804.4804.4804.4804.4804.4804.4804.4804.4804.4804.5514.5514.5514.5514.5514.5514.9684.9684.9684.9684.9685.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.065
4.5144.9635.8286.6297.5137.8548.2758.7199.5715.7336.5266.9368.1339.17810.06110.7046.6567.1737.5498.4499.31710.17310.95911.8818.5419.72010.45911.19312.47013.14113.37513.99014.29615.24416.49410.33511.55712.76314.11715.01015.70817.13210.25511.45512.56013.57215.54716.88017.25017.67218.90120.502
inin in sq inin in in in
Size
in
Nominal Weight
lb/ft
5 1/2" TO 9 5/8"
Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for the connection correspond to the lighter weight (for more information consult TenarisHydril Running Manual).Compression efficiency for SC and MS options is the same as the standard connection.For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option.
.
..
4.8254.7674.6534.5454.4234.3754.3154.2514.1255.9245.8405.7965.6665.5505.4505.3766.2416.1896.1516.0595.9695.8795.7955.6956.7506.6406.5706.5006.3766.3106.4356.3756.3456.2516.1257.7007.6007.5007.3867.3107.2507.1268.7658.6798.5998.5258.3798.2798.2518.2198.1258.001
Standard Drift Diameter
Special Drift Diameter
in
————
4.500———————————
6.250———
6.000—
5.875——————
6.3756.500
—6.375
———
7.625———————
8.625—
8.5008.375
————
15
PREM
IUM
CO
NN
ECTI
ON
SBL
UE®
Tena
risH
ydril
100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100
5.8315.8745.9536.0246.1026.1346.1696.2096.2837.0207.0517.0637.1577.2367.2997.3467.4097.4137.4417.5087.5677.6307.6857.7488.0758.1548.2018.2528.3358.3788.4888.5288.5478.6068.6859.1269.1819.2529.3319.3829.4219.50410.07910.12210.16510.21710.32310.39410.40910.43310.49610.579
5.9255.9726.0676.1576.2206.2876.331
——
7.0717.1467.1817.2917.3867.4657.5207.4847.5317.5637.642
————
8.2018.2958.3548.4138.5128.5638.6778.7248.7448.8198.9099.2449.3319.4179.5129.575
——
10.16510.24010.31110.37810.50410.587
————
3.8364.2354.9655.6316.3816.6857.0267.4098.1445.3975.7465.8766.9327.8218.5419.0856.0506.0956.4177.2037.9028.6549.31610.0807.2638.2668.8749.53410.61111.18011.38311.90912.17212.96914.0379.0339.82510.85212.00012.75313.33514.5649.3099.99810.68711.50613.22214.37514.63215.01816.05317.422
85.085.085.085.085.085.085.085.085.094.088.085.085.085.085.085.091.085.085.085.085.085.085.085.085.085.085.085.085.085.085.085.085.085.085.087.085.085.085.085.085.085.091.087.085.085.085.085.085.085.085.085.0
361.1397.0466.2530.3601.0628.3662.0697.5765.7458.7522.0554.9650.6734.2804.9856.3532.5573.9603.9675.9745.4813.8876.7950.5683.2777.6836.8895.4997.61051.31070.01119.21143.71219.51319.5826.8924.51021.01129.41200.81256.61370.6820.4916.41004.81085.71243.71350.41380.01413.71512.11640.2
248.2273.0320.5364.6413.2432.0455.2479.5526.4315.3358.9381.5447.3504.8553.4588.7366.1394.5415.2464.7512.4559.5602.7653.4469.7534.6575.3615.6685.8722.8735.6769.5786.3838.4907.1568.4635.6701.9776.5825.6863.9942.3564.0630.0690.8746.5855.1928.4948.7971.91039.51127.6
406.2446.7524.5596.6676.2706.8744.8784.7861.4516.0587.3624.3732.0826.0905.5963.4599.0645.6679.4760.4838.5915.5986.31069.3768.6874.8941.31007.31122.31182.71203.71259.11286.61372.01484.4930.21040.11148.61270.61350.91413.71541.9922.91030.91130.41221.51399.21519.21552.51590.41701.11845.2
428.8471.5553.7629.8713.7746.1786.2828.3909.3544.7619.9658.9772.6871.9955.81016.9632.3681.5717.1802.7885.1966.41041.11128.7811.3923.4993.61063.31184.61248.41270.61329.11358.11448.21566.9981.91097.91212.51341.21426.01492.21627.6974.21088.21193.21289.31476.91603.61638.71678.81795.61947.7
496.5545.9641.1729.2826.4863.9910.3959.11052.8630.7717.8763.0894.61009.51106.71177.5732.1789.1830.3929.41024.91119.01205.41306.9939.51069.21150.51231.21371.71445.51471.21538.91572.51676.91814.31136.91271.31403.91552.91651.11727.91884.51128.01260.01381.61492.91710.11856.71897.51943.92079.12255.2
564.2620.4728.5828.7939.1981.71034.41089.81196.4716.7815.7867.01016.61147.21257.61338.0832.0896.7943.61056.11164.61271.61369.81485.11067.61215.01307.41399.11558.71642.61671.91748.81787.01905.52061.71291.91444.61595.31764.71876.31963.52141.51281.91431.81570.01696.51943.32109.92156.22208.92362.62562.7
COMPRESSION EFFICIENCY
%
OutsideDiameter
OutsideDiameter
Critical Section Area
TensileEfficiency
SPECIAL CLEARANCE COUPLING
OPTIONS
MATCHED STRENGTH
in inx 1000 lb sq in %
JOINT YIELD STRENGTH
55 ksi 80 ksi 90 ksi 95 ksi 110 ksi 125 ksi
TENSILE EFFICIENCY
100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100
%
16
DESIGNATION CONNECTION INSIDE
DIAMETERWall Thickness
PIPE BODY
Inside Diameter
COUPLING
OutsideDiameter
Length
MAKE-UP LOSS
CRITICAL SECTION
AREA
9 7/8
10 3/4
11 3/4
11 7/8
13 3/8
13 1/213 5/8
0.6250.6680.7000.7070.7250.3500.4000.4500.4950.5450.5950.6500.6720.7000.7340.4350.4890.5340.5820.4700.5820.3800.4300.4800.5140.5500.5800.6080.6250.7190.5800.5550.625
8.6258.5398.4758.4618.42510.0509.9509.8509.7609.6609.5609.4509.4069.3509.28210.88010.77210.68210.58610.93510.71112.61512.51512.41512.34712.27512.21512.15912.12511.93712.34012.51512.375
10.98410.98410.98410.98411.03111.57511.57511.65411.69311.74811.89011.91311.92911.92911.98412.75212.75212.75212.75212.85412.85414.17314.17314.25214.25214.29914.35414.40214.43314.59814.48814.66514.665
11.69311.69311.69311.69311.69311.69311.69311.69311.69311.69311.69311.69311.69311.69311.69311.69311.69311.69311.69312.28312.28313.03113.03113.03113.03113.03113.03113.03113.03113.03112.99212.99212.992
8.6918.6468.5938.6088.5739.9639.8859.8069.7519.6929.6339.5709.5589.5039.45210.95010.83110.75310.67010.97310.87912.52012.44212.37112.31212.26112.22112.18212.17412.15012.40012.47812.422
5.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.0655.3615.3615.7195.7195.7195.7195.7195.7195.7195.7195.7195.7195.7195.719
18.16319.32220.17620.36220.84011.43613.00614.56115.94817.47318.98320.62421.27722.10123.09715.46317.30018.81520.42016.84120.64815.51417.48719.44520.76722.16023.31424.38625.03428.58723.54122.78825.525
inin in sq inin in in in
Size
in
Nominal Weight
lb/ft
9 7/8" TO 13 5/8"
8.4698.3838.3198.3058.2699.8949.7949.6949.6049.5049.4049.2949.2509.1949.12610.72410.61610.52610.43010.77910.55512.45912.35912.25912.19112.11912.05912.00311.96911.78112.15312.32812.188
.
..
Interchangeable where bracketed. Small variations in the connection Internal Diameter will appear. Performance Data and Make-Up Torque for the connection correspond to the lighter weight (for more information consult TenarisHydril Running Manual).Compression efficiency for SC and MS options is the same as the standard connection.For the MS option, the coupling OD is reduced to the minimum critical area capable of providing the same tensile efficiency as the standard option.
62.8066.9068.8070.4072.1040.5045.5051.0055.5060.7065.7071.1073.2076.6079.2054.0060.0065.0071.0058.8071.8054.5061.0068.0072.0077.0080.7085.0086.0098.0081.4079.1088.20
Standard Drift Diameter
Special Drift Diameter
in
8.500———
8.375———
9.625—
9.504—————
10.62510.625
—10.87510.625
———
12.250———
12.000—
12.250—
12.250
17
PREM
IUM
CO
NN
ECTI
ON
SBL
UE®
Tena
risH
ydril
100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100
10.65410.71710.75610.76810.79111.21711.25611.32711.39411.46911.53911.61411.64611.68511.72812.31912.39812.46512.53112.47212.63813.85813.89813.97614.02814.07914.12214.16514.18914.32314.28314.32314.421
10.85810.890
———
11.30311.39411.48411.56311.65011.73611.82711.862
——
12.46912.56712.64612.72812.63812.83513.95714.05114.14214.20514.26814.32314.37014.40214.56314.44114.47214.634
15.41016.40817.13217.33217.73210.39411.08912.34613.53914.88316.16317.52418.09918.82019.61713.17514.70316.01017.32414.28817.54913.97314.83016.55617.68118.81119.77020.73121.25824.25620.00319.47921.702
85.085.085.085.085.091.085.085.085.085.085.085.085.085.085.085.085.085.085.085.085.090.085.085.085.085.085.085.085.085.085.085.085.0
1453.01545.71614.11629.01667.2914.91040.51164.91275.81397.91518.61649.91702.21768.11847.71237.01384.01505.21633.61347.31651.81241.11399.01555.61661.41772.81865.11950.92002.72286.91883.31823.12042.0
999.01062.71109.71119.91146.2629.0715.3800.8877.1961.01044.11134.31170.21215.61270.3850.5951.51034.91123.1926.21135.6853.3961.81069.51142.21218.81282.21341.21376.91572.31294.81253.31403.9
1634.71738.91815.91832.61875.61029.21170.51310.51435.31572.61708.51856.21914.91989.12078.71391.71557.01693.41837.81515.71858.31396.31573.81750.01869.01994.42098.22194.82253.12572.82118.72050.92297.3
1725.51835.61916.81934.41979.81086.41235.61383.31515.11660.01803.41959.32021.32099.62194.21469.01643.51787.51939.91599.91961.51473.81661.31847.31972.92105.22214.82316.72378.22715.72236.42164.92424.9
1997.92125.42219.42239.92292.41258.01430.71601.71754.31922.12088.12268.72340.52431.22540.61700.91903.02069.72246.21852.52271.21706.51923.62138.92284.42437.62564.52682.52753.83144.52589.62506.72807.8
2270.42415.22522.02545.32605.01429.51625.81820.11993.52184.12372.92578.02659.62762.72887.11932.92162.42351.92552.52105.12580.91939.22185.92430.62595.92770.02914.23048.33129.33573.32942.72848.53190.7
COMPRESSION EFFICIENCY
%
OutsideDiameter
OutsideDiameter
Critical Section Area
TensileEfficiency
SPECIAL CLEARANCE COUPLING
OPTIONS
MATCHED STRENGTH
in inx 1000 lb sq in %
JOINT YIELD STRENGTH
55 ksi 80 ksi 90 ksi 95 ksi 110 ksi 125 ksi
TENSILE EFFICIENCY
100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100
%
18
4.60
5.10
5.80
6.30
6.60
7.35
6.40
7.80
8.60
9.35
9.80
2 3/8
2 7/8
0.190
0.218
0.254
0.280
0.295
0.336
0.217
0.276
0.308
0.340
0.362
558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580
15201690175017801880198017001910199020302150227020002260236024102560269022102510263026902880299022702560268027402920305025702920306031303340347023002530263026802820294028903220336034303630375033203760394040304260436037404260447045804820492039504510
16701860193019602070218018702100219022302370250022002490260026502820296024302760289029603170329025002820295030103210336028303210337034403670382025302780289029503100323031803540370037703990413036504140433044304690480041104690492050405300541043504960
230250260270280300260290300300320340300340350360380400330380390400430450340380400410440460390440460470500520350380390400420440430480500510540560500560590600640650560640670690720740590680
12901440149015101600168014501620169017301830193017001920201020502180229018802130224022902450254019302180228023302480259021802480260026602840295019602150224022802400250024602740286029203090319028203200335034303620371031803620380038904100418033603830
20102310244025002680287022702610275028203020323027103100326033303570380030403460363037203970423030403470363037203970423034703930411042004480476029903470366037504040433038004390462047405090544045405220550056306040645051705930623063806830728054606240
Torque table 2 3/8" TO 3 1/2"Please consider footnotes on page 30 related to torque values
13701520158016001690178015301720179018301940204018002030212021702300242019902260237024202590269020402300241024702630275023102630275028203010312020702280237024102540265026002900302030903270338029903380355036303830392033703830402041204340443035604060
SIZE(OD)
NOMINAL WEIGHT
WALLTHICKNESS
SMYS OFSTEEL GRADE
YIELDTORQUE
MAKE UP TORQUE
MinimumMaximumMinimum Optimum Maximum
SHOULDER TORQUE
ft.lbft.lb ft.lbin ft.lbksi ft.lbft.lbin lb/ft
19
PREM
IUM
CO
NN
ECTI
ON
SBL
UE®
Tena
risH
ydril
2 7/8
3 1/2
9.80
10.50
10.70
7.70
9.20
10.20
12.70
13.70
14.30
14.70
15.50
0.362
0.392
0.405
0.216
0.254
0.289
0.375
0.413
0.430
0.449
0.476
909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095
47404860509052004250486051105230547055904440511053705510573058602850345035803640384039303360378039504030421043303950446046704770495050905250600063006430660067705650650068306930712073206020698073407400761078106250724076107680789080906460744078307920
52105350560057204680535056205750602061504880562059106060630064503140380039404000422043203700416043504430463047604350491051405250545056005780660069307070726074506220715075107620783080506620768080708140837085906880796083708450868089007110818086108710
710730760780640730770780820840670770810830860880430520540550580590500570590600630650590670700720740760790900950960990102085098010201040107011009001050110011101140117094010901140115011801210970112011701190
40304130433044203610413043404450465047503770434045604680487049802420293030403090326033402860321033603430358036803360379039704050421043304460510053605470561057504800553058105890605062205120593062406290647066405310615064706530671068805490632066606730
6550671071707640584066606980714076308120616070107350752080308540338040704350449049105330400048405170534058406340472056906080628068607440618074007890814088709600657078508360862093901016070208390894092201004010860724086309190947010310111507380877093309610
42704370458046803830437046004710492050304000460048304960516052702570311032203280346035403020340035603630379039003560401042004290446045804730540056705790594060905090585061506240641065905420628066106660685070305630652068506910710072805810670070507130
SIZE(OD)
NOMINAL WEIGHT
WALLTHICKNESS
SMYS OFSTEEL GRADE
YIELDTORQUE
MAKE UP TORQUE
MinimumMaximumMinimum Optimum Maximum
SHOULDER TORQUE
ft.lbft.lb ft.lbin ft.lbksi ft.lbft.lbin lb/ft
20
15.50
8.20
9.50
10.90
13.20
14.85
16.10
16.50
18.90
10.50
11.60
3 1/2
4
4 1/2
0.476
0.190
0.226
0.262
0.330
0.380
0.415
0.430
0.500
0.224
0.250
11012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125
8130834028103140327033303530363034403910410042004410455039704580482049405140531050905880619063506560676060107020743075207770801064707540797080808340860067907960840084908760903085701026010600107101103011350365041604370447047304900414047805030516054305630
8940917030903450360036603880399037804300451046204850501043705040530054305650584056006470681069907220744066107720817082708550881071208290877088909170946074708760924093409640993094301129011660117801213012490402045804810492052005390455052605530568059706190
1220125042047049050053054052059062063066068060069072074077080076088093095098010109001050111011301170120097011301200121012501290102011901260127013101350129015401590161016501700550620660670710740620720750770810840
69107090239026702780283030003090292033203490357037503870337038904100420043704510433050005260540055805750511059706320639066006810550064106770687070907310577067707140722074507680728087209010910093809650310035403710380040204170352040604280439046204790
104501128041805030537055406050655052706330676069707610825060707280777080108730946077009160974010030109101178092001090011570119101293013940976011510122101256013610146601033012160129001327014370154701342015670165701702018370197105710694074307670840091406550795085108790963010470
732075102530283029403000318032703100352036903780397041003570412043404450463047804580529055705720590060805410632066906770699072105820679071707270751077406110716075607640788081307710923095409640993010220329037403930402042604410373043004530464048905070
3 1/2" TO 5"
SIZE(OD)
NOMINAL WEIGHT
WALLTHICKNESS
SMYS OFSTEEL GRADE
YIELDTORQUE
MAKE UP TORQUE
MinimumMaximumMinimum Optimum Maximum
SHOULDER TORQUE
ft.lbft.lb ft.lbin ft.lbksi ft.lbft.lbin lb/ft
21
PREM
IUM
CO
NN
ECTI
ON
SBL
UE®
Tena
risH
ydril
4 1/2
5
12.60
13.50
15.20
16.60
17.00
17.70
18.90
21.50
13.00
15.00
18.00
0.271
0.290
0.337
0.375
0.380
0.402
0.430
0.500
0.253
0.296
0.362
558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580
46105360566058106070629050905940629064606700695059607020744075807860815065407680813082908600890066607820828084308750906070708310880089509270960075808920945095909930102809520114201192012060124701287040004380453046104790497047005220543055105740597058406490
50705900623063906680692056006530692071107370765065607720818083408650897071908450894091209460979073308600911092709630997077809140968098501020010560834098101040010550109201131010470125601311013270137201416044004820498050705270547051705740597060606310657064207140
690800850870910940760890940970101010408901050112011401180122098011501220124012901340100011701240126013101360106012501320134013901440114013401420144014901540143017101790181018701930600660680690720750710780810830860900880970
392045604810494051605350433050505350549057005910507059706320644066806930556065306910705073107570566066507040717074407700601070607480761078808160644075808030815084408740809097101013010250106001094034003720385039204070422040004440462046804880507049605520
7440901096409950108901183083401008010770111201216013210971011680124701287014050152301045012520133501376015000162401065012750135901401015270165301129013480143601480016120174401206014370152901575017140185201563018470196002017021880235807800950010180105201154012560959011650124801289014130153701211014600
4150482050905230546056604580535056605810603062605360632067006820707073405890691073207460774080105990704074507590788081506360748079208060834086406820803085108630894092508570102801073010850112201158036003940408041504310447042304700489049605170537052605840
SIZE(OD)
NOMINAL WEIGHT
WALLTHICKNESS
SMYS OFSTEEL GRADE
YIELDTORQUE
MAKE UP TORQUE
MinimumMaximumMinimum Optimum Maximum
SHOULDER TORQUE
ft.lbft.lb ft.lbin ft.lbksi ft.lbft.lbin lb/ft
22
18.00
20.30
20.80
21.40
23.20
24.10
26.70
15.50
17.00
20.00
23.00
5
5 1/2
0.362
0.408
0.422
0.437
0.478
0.500
0.562
0.275
0.304
0.361
0.415
909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095
67406830711073806520730075607660799083106750756078207930826085906950777080508160850088307630854088308950931096808050904093209450983010220923010410107001085011280117204730522054105510574059505270588061206220648067506260704073307440777081107360834086408770
74107510782081207170803083208430879091407430832086008720909094507650855088608980935097108390939097109850102401065088609940102501040010810112401015011450117701194012410128905200574059506060631065505800647067306840713074306890774080608180855089208100917095009650
1010102010701110980110011301150120012501010113011701190124012901040117012101220128013201140128013201340140014501210136014001420147015301380156016101630169017607107808108308608907908809209309701010940106011001120117012201100125013001320
57305810604062705540621064306510679070605740643066506740702073005910660068406940723075106490726075107610791082306840768079208030836086907850885091009220959099604020444046004680488050604480500052005290551057405320598062306320660068906260709073407450
156001610017600191001368016450175601811019770214301418017020181601873020430221301448017360185101909020810225401608019200204402107022940248101736020670220002267024660266502111024970265202729029600319209900121201300013450147701610011440139901502015530170601860013790168101802018620204302225016940205602201022730
6070615064006640587065706800689071907480608068007040714074307730626069907250734076507950687076907950806083808710725081408390851088509200831093709630977010150105504260470048704960517053604740529055105600583060805630634066006700699073006620751077807890
5" TO 6 5/8"
SIZE(OD)
NOMINAL WEIGHT
WALLTHICKNESS
SMYS OFSTEEL GRADE
YIELDTORQUE
MAKE UP TORQUE
MinimumMaximumMinimum Optimum Maximum
SHOULDER TORQUE
ft.lbft.lb ft.lbin ft.lbksi ft.lbft.lbin lb/ft
23
PREM
IUM
CO
NN
ECTI
ON
SBL
UE®
Tena
risH
ydril
6 5/8
23.00
26.00
26.80
28.40
29.70
32.60
20.00
23.20
24.00
28.00
32.00
0.415
0.476
0.500
0.530
0.562
0.625
0.288
0.330
0.352
0.417
0.475
11012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125
91709560858097401006010210106601111089301015010460106201109011560958010900112401141011910124101007011460118101199012510130401124012770131601335013930145105660634066006700701073306650758078708010842088307170822085208680914096108720100101038010570111401171099101141011860120801276013430
100901052094401071011070112301173012220982011170115101168012200127201054011990123601255013100136501108012610129901319013760143401236014050144801469015320159606230697072607370771080607320834086608810926097107890904093709550100501057095901101011420116301225012880109001255013050132901404014770
13801430129014601510153016001670134015201570159016601730144016401690171017901860151017201770180018801960169019201970200020902180850950990101010501100100011401180120012601320108012301280130013701440131015001560159016701760149017101780181019102010
77908130729082808550868090609440759086308890903094309830814092709550970010120105508560974010040101901063011080955010850111901135011840123304810539056105700596062305650644066906810716075106090699072407380777081707410851088208980947099508420970010080102701085011420
2490027080199002401025650264702893031400208702515026860277103027032840229802760029450303803315035930239802874030650316003446037320271103233034410354603859041720131001636017670183202028022240161802022021840226402507027490177502217023940248302748030130223502778029950310403429037550254903157034000352203887042520
82508600772087709050919095901000080409140941095609980104008620981010120102701072011170906010310106301079011260117401012011490118401202012540130605090571059406030631066005990682070807210758079506450740076707810823086507850901093409510100301054089201027010670108701148012090
SIZE(OD)
NOMINAL WEIGHT
WALLTHICKNESS
SMYS OFSTEEL GRADE
YIELDTORQUE
MAKE UP TORQUE
MinimumMaximumMinimum Optimum Maximum
SHOULDER TORQUE
ft.lbft.lb ft.lbin ft.lbksi ft.lbft.lbin lb/ft
24
35.00
36.70
23.00
24.75
26.00
29.00
32.00
35.00
38.00
41.00
29.70
6 5/8
7
7 5/8
0.525
0.562
0.317
0.343
0.362
0.408
0.453
0.498
0.540
0.590
0.375
558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580
109901262013110133501409014820114601314013640138901465015400655074407750788082808680728083808700886093309810780090109360954010070106008920103501078011000116401229099601154012030122701300013720109801271013240135001428015070119001375014310145901543016260132001523015840161501707017990901010380
12090138801442014690155001630012610144501500015280161201694072108180853086709110955080109220957097501026010790858099101030010490110801166098101139011860121001280013520109601269013230135001430015090120801398014560148501571016580130901513015740160501697017890145201675017420177701878019790991011420
1650189019702000211022201720197020502080220023109801120116011801240130010901260131013301400147011701350140014301510159013401550162016501750184014901730180018401950206016501910199020302140226017902060215021902310244019802280238024202560270013501560
9340107301114011350119801260097401117011590118101245013090557063206590670070407380619071207400753079308340663076607960811085609010758088009160935098901045084709810102301043011050116609330108001125011480121401281010120116901216012400131201382011220129501346013730145101529076608820
2832034940375903891042880468502851035090377203903042980469301596020040216802250024950274001846023200250902604028880317202017025330273902842031520346202337029290316503283036380399302609032580351803648040370442602874035750385603996044170483803103038490414704296047440519103502043270465704821053160581102368029790
9890113601180012020126801334010310118301228012500131901386059006700698070907450781065507540783079708400883070208110842085909060954080309320970099001048011060896010390108301104011700123509880114401192012150128501356010710123801288013130138901463011880137101426014540153601619081109340
6 5/8" TO 7 3/4"
SIZE(OD)
NOMINAL WEIGHT
WALLTHICKNESS
SMYS OFSTEEL GRADE
YIELDTORQUE
MAKE UP TORQUE
MinimumMaximumMinimum Optimum Maximum
SHOULDER TORQUE
ft.lbft.lb ft.lbin ft.lbksi ft.lbft.lbin lb/ft
25
PREM
IUM
CO
NN
ECTI
ON
SBL
UE®
Tena
risH
ydril
7 5/8
7 3/4
29.70
33.70
35.80
39.00
42.80
45.30
46.10
47.60
48.60
51.80
56.10
0.375
0.430
0.465
0.500
0.562
0.595
0.595
0.625
0.640
0.687
0.750
909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095
1079010980115701215010700124201291013150138901463011580134701402014300151301595012610146701528015580164901741014030163201701017360183901943014490168301753017880189201997014960172201790018230192402024015970184201916019530206302174016500190401981020200213602252018190209502180022220234902476020540235602450024970
1187012080127301337011770136601420014470152801609012740148201542015730166401755013870161401681017140181401915015430179501871019100202302137015940185101928019670208102197016460189401969020050211602226017570202602108021480226902391018150209402179022220235002477020010230502398024440258402724022590259202695027470
16201650174018201610186019401970208021901740202021002150227023901890220022902340247026102100245025502600276029102170252026302680284030002240258026902730289030402400276028702930309032602480286029703030320033802730314032703330352037103080353036803750
91709330983010330910010560109701118011810124409840114501192012160128601356010720124701299013240140201480011930138701446014760156301652012320143101490015200160801697012720146401522015500163501720013570156601629016600175401848014030161801684017170181601914015460178101853018890199702105017460200302083021220
3224033460371304080029130365503952041010454604992031350392704244044020487705352034450430504649048210533705853037620468505054052380579206345037590467205038052200576806316037460465105013051930573606279040790505705449056440623106818042570527505682058850649607106048260595906412066380731807997056130689507408076640
9710988010410109409630111801162011840125001317010420121201262012870136201436011350132001375014020148401567012630146901531015620165501749013040151501578016090170301797013460155001611016410173201822014370165801724017580185701957014850171401783018180192202027016370188601962020000211402228018490212002205022470
SIZE(OD)
NOMINAL WEIGHT
WALLTHICKNESS
SMYS OFSTEEL GRADE
YIELDTORQUE
MAKE UP TORQUE
MinimumMaximumMinimum Optimum Maximum
SHOULDER TORQUE
ft.lbft.lb ft.lbin ft.lbksi ft.lbft.lbin lb/ft
26
56.10
36.00
40.00
44.00
49.00
52.00
54.00
58.70
36.00
40.00
43.50
7 3/4
8 5/8
9 5/8
0.750
0.400
0.450
0.500
0.557
0.595
0.625
0.687
0.352
0.395
0.435
11012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125
2638027790117101344013960142101499015760122801384014260144801511015750150501745018210185801972020850174102014020990214202269023970185702150022440229002430025700198002293023950244502597027490215602492026000265402816029780122301386014340145901531016040139001584016430167301762018510156801797018690190502012021200
2902030570128801478015360156301649017340135101522015690159301662017330165601920020030204402169022940191502215023090235602496026370204302365024680251902673028270217802522026350269002857030240237202741028600291903098032760134501525015770160501684017640152901742018070184001938020360172501977020560209602213023320
39604170176020202090213022502360184020802140217022702360226026202730279029603130261030203150321034003600279032303370344036503860297034403590367039004120323037403900398042204470183020802150219023002410209023802460251026402780235027002800286030203180
224202362099501142011870120801274013400104401176012120123101284013390127901483015480157901676017720148001712017840182101929020370157801828019070194702066021850168301949020360207802207023370183302118022100225602394025310104001178012190124001301013630118201346013970142201498015730133301527015890161901710018020
8433092020302503818041360429404771052470349404419047900497505530060850385504878052870549206105067190462905836063200656107286080110488306153066620691607678084400527206635071810745408272090900563107068076430793108793096550337004289046560484005391059420377604796052040540806020066330434505516059850621906922076240
2374025010105401210012560127901349014180110501246012830130301360014180135501571016390167201775018770156701813018890192802042021570167101935020200206102187023130178202064021560220102337024740194002243023400238902534026800110101247012910131301378014440125101426014790150601586016660141101617016820171501811019080
7 3/4" TO 9 7/8"
SIZE(OD)
NOMINAL WEIGHT
WALLTHICKNESS
SMYS OFSTEEL GRADE
YIELDTORQUE
MAKE UP TORQUE
MinimumMaximumMinimum Optimum Maximum
SHOULDER TORQUE
ft.lbft.lb ft.lbin ft.lbksi ft.lbft.lbin lb/ft
27
PREM
IUM
CO
NN
ECTI
ON
SBL
UE®
Tena
risH
ydril
9 5/8
9 7/8
47.00
53.50
58.40
59.40
61.10
64.90
70.30
62.80
66.90
68.80
70.40
0.472
0.545
0.595
0.609
0.625
0.672
0.734
0.625
0.668
0.700
0.707
558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580
1717019760205802099022230234602027023450245002503026610281902209025600267902739029180309702168025130262902687028620303602256026140273502796029780315902466028530298503051032490344702714031330327603348035630377802419027880291402978031670335702553029370307103138033380353902734031560330603382036070383302729031520
1889021740226402309024450258102230025800269502753029270310102430028160294703013032100340702385027640289202956031480334002482028750300903076032760347502713031380328403356035740379202985034460360403683039190415602661030670320503276034840369302808032310337803452036720389303007034720363703720039680421603002034670
25802960309031503330352030403520368037503990423033103840402041104380465032503770394040304290455033803920410041904470474037004280448045804870517040704700491050205340567036304180437044704750504038304410461047105010531041004730496050705410575040904730
1459016800174901784018900199401723019930208302128022620239601878021760227702328024800263201843021360223502284024330258101918022220232502377025310268502096024250253702593027620293002307026630278502846030290321102056023700247702531026920285302170024960261002667028370300802324026830281002875030660325802320026790
477106050065610681707584083520571607231078370814009049099580616307783084300875409726010697057280722707827081260902609925060560763608267085830953101047806746084840918009527010570011613074740936901012701050601164301278006774085690928809647010724011801071820907109827010205011339012472076570965901046001086001206101326307535095050
1545017780185201889020010211101824021110220502253023950253701988023040241102465026260278701951022620236602418025760273202030023530246202516026800284302219025680268702746029240310202443028200294803013032070340002177025090262302680028500302102298026430276402824030040318502461028400297503044032460345002456028370
SIZE(OD)
NOMINAL WEIGHT
WALLTHICKNESS
SMYS OFSTEEL GRADE
YIELDTORQUE
MAKE UP TORQUE
MinimumMaximumMinimum Optimum Maximum
SHOULDER TORQUE
ft.lbft.lb ft.lbin ft.lbksi ft.lbft.lbin lb/ft
28
70.40
72.10
40.50
45.50
51.00
55.50
60.70
65.70
71.10
73.20
76.60
9 7/8
10 3/4
0.707
0.725
0.350
0.400
0.450
0.495
0.545
0.595
0.650
0.672
0.700
909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095
3302033770360303828028230325503409034850371603946015730164501645016450164501645017920187001870018700187001870020540214102141021410214102141022560234702347023470234702347024860258102581025810258102581026300273902739027390273902739029970310203102031020310203102032000320003200032000320003200032290333203332033320
3632037150396304211031050358103750038340408804341017300181001810018100181001810019710205702057020570205702057022590235502355023550235502355024820258202582025820258202582027350283902839028390283902839028930301303013030130301303013032970341203412034120341203412035200352003520035200352003520035520366503665036650
49505070540057404230488051105230557059202360247024702470247024702690281028102810281028103080321032103210321032103380352035203520352035203730387038703870387038703950411041104110411041104500465046504650465046504800480048004800480048004840500050005000
2807028700306303254024000276702898029620315903354013370139801398013980139801398015230159001590015900159001590017460182001820018200182001820019180199501995019950199501995021130219402194021940219402194022360232802328023280232802328025470263702637026370263702637027200272002720027200272002720027450283202832028320
1029201068601186801305007867099100107280111360123620135880403205182056420587206561072510480106166067120698507804086220560607183078140812909075010021061850790808598089430997701101106818086970944909825010952012080063970812008810091550101890112230820201041001129301173501305901438408360010598011493011941013283014626088830112510121980126710
2972030390324303445025410293003068031370334403551014160148101481014810148101481016130168301683016830168301683018490192701927019270192701927020300211202112021120211202112022370232302323023230232302323023670246502465024650246502465026970279202792027920279202792028800288002880028800288002880029060299902999029990
9 7/8" TO 13 3/8"
SIZE(OD)
NOMINAL WEIGHT
WALLTHICKNESS
SMYS OFSTEEL GRADE
YIELDTORQUE
MAKE UP TORQUE
MinimumMaximumMinimum Optimum Maximum
SHOULDER TORQUE
ft.lbft.lb ft.lbin ft.lbksi ft.lbft.lbin lb/ft
29
PREM
IUM
CO
NN
ECTI
ON
SBL
UE®
Tena
risH
ydril
10 3/4
11 3/4
11 7/8
13 3/8
76.60
79.20
54.00
60.00
65.00
71.00
58.80
71.80
54.50
61.00
68.00
0.700
0.734
0.435
0.489
0.534
0.582
0.470
0.582
0.380
0.430
0.480
11012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125
3332033320342403528035280352803528035280218902267022670226702267022670247202560025600256002560025600269002778027780277802778027780292503007030070300703007030070244502529025290252902529025290287702961029610296102961029610243002501025010250102501025010273202805028050280502805028050309303171031710317103171031710
3665036650376603881038810388103881038810240802494024940249402494024940271902816028160281602816028160295903056030560305603056030560321803308033080330803308033080269002782027820278202782027820316503257032570325703257032570267302751027510275102751027510300503086030860308603086030860340203488034880348803488034880
50005000514052905290529052905290328034003400340034003400371038403840384038403840404041704170417041704170439045104510451045104510367037903790379037903790432044404440444044404440365037503750375037503750410042104210421042104210464047604760476047604760
2832028320291002999029990299902999029990186101927019270192701927019270210102176021760217602176021760228702361023610236102361023610248602556025560255602556025560207802150021500215002150021500244502517025170251702517025170206602126021260212602126021260232202384023840238402384023840262902695026950269502695026950
1409201551209449011946012945013444014942016441052070666607249075410841609292065280837409112094810105890116970743809538010378010798012059013319084040107690117150121880136060150250625308025087340908901015201121507447095320103660107830120340132860668408643094270981901099401217007849010147011066011525012904014283089620115610126010131210146810162410
2999029990308203175031750317503175031750197002040020400204002040020400222502304023040230402304023040242102500025000250002500025000263302706027060270602706027060220102276022760227602276022760258902665026650266502665026650218702251022510225102251022510245902525025250252502525025250278402854028540285402854028540
SIZE(OD)
NOMINAL WEIGHT
WALLTHICKNESS
SMYS OFSTEEL GRADE
YIELDTORQUE
MAKE UP TORQUE
MinimumMaximumMinimum Optimum Maximum
SHOULDER TORQUE
ft.lbft.lb ft.lbin ft.lbksi ft.lbft.lbin lb/ft
30
72.00
77.00
80.70
85.00
86.00
98.00
81.40
79.10
88.20
13 3/8
13 1/2
13 5/8
0.514
0.550
0.580
0.608
0.625
0.719
0.580
0.555
0.625
558090951101255580909511012555809095110125558090951101255580909511012555809095110125558090951101255580909511012555809095110125
330203374033740337403374033740355503627036270362703627036270378003853038530385303853038530399104065040650406504065040650409704175041750417504175041750463504736047360473604736047360371703791037910379103791037910335003527035270352703527035270367103843038430384303843038430
363203711037110371103711037110391103990039900399003990039900415804238042380423804238042380439004472044720447204472044720450704593045930459304593045930509905210052100521005210052100408904170041700417004170041700368503880038800388003880038800403804227042270422704227042270
495050605060506050605060533054405440544054405440567057805780578057805780599061006100610061006100615062606260626062606260695071007100710071007100558056905690569056905690503052905290529052905290551057605760576057605760
280702868028680286802868028680302203083030830308303083030830321303275032750327503275032750339203455034550345503455034550348203549035490354903549035490394004026040260402604026040260315903222032220322203222032220284802998029980299802998029980312003267032670326703267032670
98400126890138280143980161070178170106510137140149390155520173900192280112970145240158150164600183960203320119370153270166830173610193950214300121040155270168960175810196340216880127400162610176690183740204860225980106510136320148250154210172110190000110810143070155980162430181780201140120300154980168850175790196600217410
297203037030370303703037030370320003264032640326403264032640340203468034680346803468034680359203659036590365903659036590368703758037580375803758037580417204262042620426204262042620334503412034120341203412034120301503174031740317403174031740330403459034590345903459034590
13 3/8" TO 13 5/8"
SIZE(OD)
NOMINAL WEIGHT
WALLTHICKNESS
SMYS OFSTEEL GRADE
YIELDTORQUE
MAKE UP TORQUE
MinimumMaximumMinimum Optimum Maximum
SHOULDER TORQUE
ft.lbft.lb ft.lbin ft.lbksi ft.lbft.lbin lb/ft
....
SMYS: Specified Minimum Yield Strength.An appropriate safety factor should be applied to these yield torque values.Latest version of the specific Product Data Sheet can be obtained from Tenaris’s website.These torque values apply for Carbon and Low Alloy Steel Grades and shall be considered for reference purposes only. Torques may vary for other types of materials. Please contact your local Technical Sales representative for further support.
31
PREM
IUM
CO
NN
ECTI
ON
SBL
UE®
Tena
risH
ydril
For further information on our connections, please visit our website and find:
Running Manual (general guidelines on handling and care of connections and well installation recommendations)
Premium Connections Performance Data(connections performance, torque values,geometries and pipe body data)
Blanking Dimensions
Threading & Repair Shops locations
For technical assistance, please contact
Tenaris has produced this brochure for general information only. While every effort has been made to ensure the accuracy of the information contained within this publication, Tenaris does not assume any responsibility or liability for any loss, damage, injury resulting from the use of information and data herein. Tenaris products and services are only subject to the Company’s standard terms and Conditions or otherwise to the terms resulting from the respective contracts of sale, services or license, as the case may be. The information in this publication is subject to change or modification without notice. For more complete information please contact a Tenaris’s representative or visit our website at www.tenaris.com. This brochure supersedes TSH / PC / Version 04 / July 2013. TSH / PC / Version 05 / October 2018 ©Tenaris 2018. All rights reserved.
.
.
.
.
www.tenaris.com