BlueLine Upright Refrigerators and Freezers

Manual of Instrucons for use and Installaon

Upright Refrigerators and Freezers

Index

1. Technical Specifications

2. Basic Features

2.1 Blueline Digital ThermostatThe BLUELINE controller has been programmed with algorithms in order to reduce the amount of starts the compressor needs to make in relaon to its usage. Most electrical energy is used on a refrigerated cabinet when a compressor starts, so by reducing the number of starts it reduces the overall energy usage. This does not affect the storage temperature of the product.

2.2 E2.2 Environmentally Friendly and Funconal DesignCabinets are manufactured using environmentally friendly technology. Insulaon is made of Cyclopean. The reversible door has an ergonomic easy-grip handle.

2.3 Door LockAll models are equipped with a door lock. This ensures that your stock stays safe aer closing.

2.4 StrengthTheThe powerful refrigeraon system is designed to withstand heavy day-to-day loads. During peak loading, when other refrigerators would give up, the correct temperature is kept stable throughout the cabinet.

2. Basic Features

2.5 Easy CleaningThe inside walls of the cabinet are made of moulded plasc, making them easy to clean.

2.6 Removable GasketsThe door gasket keeps in cold, for cleaning, it is easy to remove with no need for tools – simple and hygienic.

2.7 2.7 Robust Stable Wire ShelvesIn refrigerators, the heavy duty movable wire shelves are mounted in U-shaped rails moulded into the plasc walls. The rails prevent the shelves from lng when pulled out.

3. Location and InstallationThe cabinet should be placed in a room that is dry and sufficiently venlated. To operate efficiently it should not be posioned in direct sunlight or near warm appliances. Please note that opmal cabinet performance is aained at an ambient operang temperature between +16 to +35C.

BBy placing the cabinet in an environment with high air humidity, it may be necessary to acquire extra equipment for evaporaon of the drip water in the pan near the compressor. The cabinet can be installed freestanding against a wall.

Important – the cabinet must have sufficient venlaon and free air circulaon beneath, above and behind the cabinet and the spacers at the rear of the cabinet will help ensure that there is sufficient air space.

4. Power RequirementsTheThe cabinet is intended for connecon to an alternang current, the connecon voltage (V) and the frequency (Hz) are shown on the name plate in the cabinet. The power connecon is made by using a three pin plug to a wall socket.

WARNING – THE APPLIANCE MUST BE EARTHED

TheThe flexible cord fied to this appliance has three cores for use with a 3-pin 13 amp plug. If a B.B 1363 (13 amp) fused plug is used, it should be fied with a 13amp fuse or a moulded right-angled Schuko plug. Note that the plate with a hole in it between and above two pins – this connects to French and Belgian sockets, which have an earth pin that scks out. Running in a slot coming from that plate is a connuaon strip from the plage. Other European countries use a socket with a scrolled metal connector emerging from the side which mates with that strip. This ensures that the Schuko can be used in most mainland European countries.

Important: The wires in this mains lead are coloured in accordance with the following code;

Green and Yellow = EarthBlue = NeutralBrown = Live

5. Starting UpPlug in the Plug in the cabinet, aer a short while the digital display will show the actual cabinet temperature.

6. Temperature SettingThe digital Blueline controller is programmed in such a way that the thermostat automacally maintains the appropriate temperature inside the cabinet. This temperature control is gauged by the factory and should NOT be touched by the user, only if the internal temperature is too warm or too cold should buons be pressed.

7. DefrostingTheThe refrigerator models defrost automacally using water evaporaon. In order to defrost the freezer models you will need to disconnect the mains power cord and wait for the internal ice to melt.

8. Changing the Door HingeThe door can be changed from right handed to le handed hinge or vice versa. In order to do this you will need to follow the instrucons listed below;

- Switch off the power at the mains socket, remove the top panel and disconnect the mul plug inside- Remove the hinge pin and li off the door-- Move hinge from one side to the other- Move the handle from one side to the other- Place the door in the hinge on the desired side. Insert the hinge pin in the hinge and in the door hinge bush. Fasten the hinge- Connect the mul plug to the panel and then fasten the panel.- Resume power to the cabinet

9. Troubleshooting

10. CleaningBefore cleaning, switch the cabinet off at the mains!The cabinet should be kept clean by using a mild soap soluon. Do not use abrasive cleansers. The plasc parts cannot withstand boiling water (maximum temperature should be =85C).

When regular cleaning is performed, be sure to wipe clean the rubber door gasket in order to ensure that any scky substances are removed as they may damage the gasket.

TheThe condenser fan air outlet must be free of any obstrucons such as leaves, paper etc. in order to ensure opmum performance of the cabinet.

The condenser on the back of the cabinet must be regularly cleaned as well. This is best done with a so brush and vacuum cleaner.

11. DisposalIf the cabinet is no longer of use and you wish to dispose of it please do so in an environmentally friendly manner and in regards to the local regulaons on the disposal of such products.

AlAlternavely, Acme offer a free disposal service. We will come and collect and safely dispose of your equipment free of charge.

Call us now on 01254 277999