BMW E38 E39 E46 E53 E60 E61 E90 remote key resync
1. Unlock your car and sit in the drivers seat then lock the
doors (locking the doors isn't important it also works if they're
unlocked but its easier to watch the doors pins later)
2. Put your key in the ignition
3. Turn your key to the 1st position briefly just so you see the
mileage until service light come up (or
whatever it is that your bottom middle box on the dashboard
displays) then turn off and remove key.
You need only do this once you can do it more than once for your
own preference but it doesn't matter once is enough. Also it
doesn't matter if you leave it on in the 1st position for 1second
or 10
seconds as long as the process of turning it to 1st position and
off again removing the key has been completed.
4. Press and hold the door unlock button and whilst doing that
press the door lock button 3 times then release the unlock button,
as soon as you release that unlock button the door pins will shoot
up
and back down again or if it was unlocked then they go down then
back up again it doesn't really matter it's just a sign to tell you
that the programming was successful. If you have a second key
then
dont repeat steps 3 just pick up the other key as soon as those
door pins have shot up and down and do the same as you did with the
first key. Hold the door unlock button and press the lock
button
3 times then let go of the door unlock button and the door pins
will shoot up and down again.
VMKautolocksmith
22 Cavendish Street Peterborough
Cambridgeshire PE1 5EG
United Kingdom
Tel: +44 1780 407679
Mob: +44 7733 773791 Email: [email protected]
