Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Ball valve are designed, constructed and tested according to API-6D standards.
All trunnion mounted type ball valve employ a sealing principle
that facilitates all services requiring double block and bleed
integrity.
DESIGN AND TEST
DOUBLE BLOCK AND BLEED
DOUBLE PISTON EFFECT
Body to Stemanti-static ball
Ball to Stemanti-static ball
B ED FCA
UP STREAM DOWN STREAM
BODY CAVITY
(A-C) (D-E)
B ED FCA
BODY CAVITY
UP STREAM DOWN STREAM(A-C) (D-E)
DOUBLE PISTON EFFECT SELF RELIEVING
(B-C) (D-F) (B-C) (D-F)
Body to Stemanti-static ball
Ball to Stemanti-static ball
B ED FCA
UP STREAM DOWN STREAM
BODY CAVITY
(A-C) (D-E)
B ED FCA
BODY CAVITY
UP STREAM DOWN STREAM(A-C) (D-E)
DOUBLE PISTON EFFECT SELF RELIEVING
(B-C) (D-F) (B-C) (D-F)
On request the seat rings design may be modified to perform
the double piston effect action. In this case the pressure
acting on both the external and internal side of the seat rings,
results in force pushing the game against the ball, therefore
each seat rings grants the required tightness even if the
pressure is applied in the body cavity. This feature adds an
extra sealing feature to the valve, but to release the possible
over pressure developed into the body cavity it is necessary
to use an exyernal safety relief valve.
All model trunnion mounted type ball valve are supplied with spring-loaded seats to ensure that the seats are
always in contact with the ball. this design providesa very efficient seal even at low line pressure. As the line
pressure increases, the seat is forced into tighter contact with the ball providing a positive shut-off.
SEALING PRINCIPLE
UP STREAM
S SR
BALL VALVE
DOWN STREAM
S SR
PK_100PK_104
The secondary metal seat is provided to contact between
the seat and ball in the event the primary non-metallic seat
is destroyed by fire all trunnion mounted type ball valve are
fire-safe designed. The double body and cap seals provide
maximum security. It is fitted with special graphite seals so
as to effectively preclude leakage in the event of fire. All top
trunnion mounted ball valve have been tested to API-607 and
API-6FA
FIRE SAFE CONSTRUCTION
All model trunnion mounted type ball valve are designed to provide high integrity shut-off. Upon request,
sealant lubrication fittings are installed. In the event of seat insert or stem seal damage, external or internal
leakage can occur. Emergency sealant injection can save the integrity of the valve by incorporating a sealant
seal around the stem or between the seat and the ball until such time the valve may be properly serviced.
SECONDARY SEAT AND STEM SEALING OPTION
Burned O-Ring
Line Pressure
Metal to Metal Seat
Burned Seat
Graphite Seal
Stem Sealant Injection Seat Sealant Injection
PK_101PK_105
All top flanged end products shall have an integrally cast(ISO)actuator mounting pad. This feature provides
for direct mount of gear operators or electric actuators. The additional cast for separate mounting bracket is
eliminated.
The stem seal retainer, with its(2) static viton o-ring seals; Accepts the forces provided by the combination
iso mounting pad/packing gland & transmits those forces as packing/disc spring factory pre-load. A variety of
o-ring seals are available for those exceptionally demanding applications. Field maintenance & costly repairs
are virtually eliminated.
Optional conical disc springs insure adequate loading of packing at all times. Excessive stem torque and
packing deformation due to over-tightening of conventional packing glands is eliminated. The constant
"LOAD" provided by the disc springs compensates for normal wear-repair and maintenance costs are
virtually eliminated.
The high pressure/high temperature packing set is comprised of self-cleaning, die-formed, high-density and
low-density graphite molded packing materials. This unique design eliminates stem galling, lowers required
valve stem torque and increases product performance.
ACTUATOR MOUNTING ISO 5211
STATIC SEALED STEM SEAL RETAINER
SPRING FORCE
PACKING
This option provides premier valve stem sealing characteristics for adverse conditions of extreme pressure/
temperture variations. Designed to meet the most stringent fugitive emission regulations,design is comprised
of an extra deep stuffing box/packing/stem seal retainer & conical disc spring. The disc spring provide
contiuous compression of the packing assembly and compensate for wear.
AT ALL TIMES-STEM SEAL
Ball valve present a particular problem with the build up of static
electricity auound the ball. They have anti-static design which
provides contact between stem and ball, and stem and body to
eliminate static electricity.
ANTI-STATIC DESIGN ISO17292
Actuator Mounting(ISO 5211)
Fire Sealed Graphite Packing
Stem Sealed Lantern Ring
Stem Sealant Fitting
Low Operating Torque(Stem Bush)
Anti-Static Device(ISO 17292)
PK_102PK_106
Trunnion mount design locates the low stem trunnion assembly
within the confines of body & cap. In so doing, both the line
pressure and media act upon all valve cavity components
equally.The advantages of such a design include:
1. The pressure & media does not concentrate in one location
only, instead the forces are dispersed equally throughout the
pressurized areas.
2. Ball movement and side loading of lower stem is minimized,
thereby decreasing operational torque valve and improving
stem seal life end.
3. Gurantee the low torque and extend valve life.
TRUNNION LOW STEM DESIGN
The PTFE gasket acts as the primary seal for top
unibody ball valve. the secondary seal is made of
flexible graphite; A material with extremely good
resistance to fire conditions.
UNIQUE DOUBLE SEALING DESIGN AND METAL TO METAL CONTACT
RTFE SeatRTFE Gasket(Primary Seal)
GraphiteGasket(Secondary Seal)
Metal to Metal
RTFE SeatRTFE Gasket(Primary Seal)
GraphiteGasket(Secondary Seal)
Metal to Metal
APPLICATION OF SEAT PER TEMPERATURE
SEAT METARIAL DESIGN TEMPERATURECLASS
RTFE
RTFE
RTFE
NYLON(DEVLON)
NYLON(DEVLON)
NYLON(DEVLON)
PEEK
METAL
150#
300#
600#
900#
1500#
2500#
ALL CLASS
ALL CLASS
- 50℃ ~ +180℃
- 50℃ ~ +150℃
- 50℃ ~ +100℃
- 45℃ ~ +190℃
- 45℃ ~ +170℃
- 45℃ ~ +160℃
200℃ & OVER
250℃ & OVER
PK_103PK_107
H1
(APP
ROX)
W1
NO. PART NAME MATERIAL123456789
1011121314151617181920
BODYCAPBALLSTEMPACKING GLANDSEAT RINGPACKINGTHRUST BEARING(STEM)CAP GASKETCAP BOLTNUTO-RING(CAP)O-RING(STEM)GLAND BOLTSTOP BOLTLEVER BOLTSTOPPERWASHERLEVERANTI STATIC
A216 - WCBA216 - WCBA351-CF8MA276-316A276-316RTFEGRAPHITEPTFEGRAPHITEA193-B7A194-2HVITONVITONA193-B7A193-B7A283-D+GAL’VA283-D+GAL’VA307-BCARBON STEEL316SS
STANDARD MATERIAL SPECIFICATIONS
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
L
H (A
PPRO
X)ød
W
FLOATING BALL, FULL BORE ASME CLASS 150#, 300#, 600#
PK_104PK_108
DIMENSION AND WEIGHTCLASS 150 UNIT : mm
1/215
108--
90-
180-
2.2
3/420
117--
100-
180-
3.2
125
127--
106-
230-
4.8
1 1/238
165178190128
-250
-8.2
250
178190216145
-250
-11.5
376
20321628219517835025028.5
410022924130521519835025042.0
615239440645728525845030084.5
8203457470521337325500400
152.0
SIZE
L
Ød
HH1W
W1 WEIGHT(kg)
B
RFRTJBW
CLASS 300 UNIT : mm
SIZE
L
Ød
HH1W
W1 WEIGHT(kg)
B
RFRTJBW
CLASS 600 UNIT : mm
SIZE
L
Ød
HH1W
W1WEIGHT(kg)
B
RFRTJBW
1/215
140--
90-
180-
2.8
3/420
152--
100-
180-
3.8
125
165--
106-
230-
5.6
1 1/238
190203190128
-250
-10.5
250
216232216145
-250
-15.0
376
28229828219517835025033.0
410030532130521519835025050.5
6152403419457285258450300
108.0
8203502517521337325500400
184.0
1/215
16516516590-
180-
3.7
3/420
191191191100
-180
-5.6
125
216216216106
-230
-7.8
1 1/238
241241241128
-250
-13.5
250
292295292148
-250
-27.5
376
35635935620118240025053.6
410043243543222020250025093.0
6152559562559290263700300
178.5
8203660664660340335
1000400
340.5
PK_105PK_109
NO. PART NAME MATERIAL123456789
101112131415161718192021
BODYCAPBALLSTEMSEAT RINGPACKING GLANDCAP BOLTLEVER NUTSTEM NUTSTOPPERLOCKING DEVICEPACKINGGASKETSEAT SEALBACK SEATO-RING(CAP)O-RING(SEAT)THRUST WASHERANTI STATIC DEVICECONICAL SPRINGLEVER
A105A105A276-316A564-630NYLONA276-316A193-B7A194-2HA194-2HA283D+GAL’VA283D+GAL’VGRAPHITEGRAPHITEGRAPHITEGRAPHITEVITONVITONRTFE316SSC.S+GAL’VA108-1020+VINYL
STANDARD MATERIAL SPECIFICATIONS
L
ød
H (A
PPRO
X)
W
FLOATING BALL, FULL BORE ASME CLASS 900#, 1500#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
PK_106PK_110
CLASS 900 / 1500 UNIT : mm
1/213
21621621695
1802.2
3/420
2292292291001803.2
125
2542542541102304.8
1 1/238
3053053051182508.2
SIZE
L
Ød
HW
B
RFRTJBW
WEIGHT(kg)
DIMENSION AND WEIGHT
PK_107PK_111
NO. PART NAME MATERIAL123456789
1011121314151617181920
BODYCAPBALLSTEMPACKING GLANDSEAT RINGPACKINGTHRUST BEARING(STEM)CAP GASKETCAP BOLTNUTO-RING(CAP)O-RING(STEM)GLAND BOLTSTOP BOLTLEVER BOLTSTOPPERWASHERLEVERANTI STATIC
A216 - WCBA216 - WCBA351-CF8MA276-316A276-316RTFEGRAPHITEPTFE316/GRAPHITEA193-B7A194-2HVITONVITONA193-B7A193-B7A283-D+GAL’VA283-D+GAL’VA307-BCARBON STEEL316SS
STANDARD MATERIAL SPECIFICATIONS
H1
(APP
ROX)
W1
L
H (A
PPRO
X)
ød1
ød
W
PK_108
FLOATING BALL,REDUCED BORE ASME CLASS 150#, 300#, 600#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
PK_112
DIMENSION AND WEIGHTCLASS 150
CLASS 300 UNIT : mm
1/21513
140--
90-
180-
2.8
3/42015
152--
90-
180-
3.2
12520
165--
100-
180-
4.6
1 1/23825
190203190106
-230
-8.5
25038
216232216128
-250
-13.2
37650
282298282145
-250
-31.0
410076
30532130519517835025042.5
615210040341945721519835025079.8
8203152502517521285258450300
135.0
10252203568584559337325500400
220.5
SIZE
L
ØdØd1
HH1W
W1 WEIGHT(kg)
B
RFRTJBW
CLASS 600 UNIT : mm1/21513
16516516590-
180-
3.7
3/42015
19119119190-
180-
4.8
12520
216216216100
-180
-6.5
1 1/23825
241241241106
-230
-9.8
25038
292295292128
-250
-18.5
37650
356359356148
-250
-30.5
410076
43243543220118240025067.8
6152100559562559220202500250
122.5
8203152660663660290263700300
182.5
SIZE
L
ØdØd1
HH1W
W1WEIGHT(kg)
B
RFRTJBW
UNIT : mm1/21513
108--
90-
180-
2.2
3/42015
117--
90-
180-
2.8
12520
127--
100-
180-
3.5
1 1/23825
165178190106
-230
-5.2
25038
178190216128
-250
-10.2
37650
203216282145
-250
-22.5
410076
22924130519517835025032.5
615210039440645721519835025052.5
8203152457470521285258450300
105.5
10252203533546559337325500400
180.5
SIZE
L
ØdØd1
HH1W
W1WEIGHT(kg)
B
RFRTJBW
PK_109PK_113
NO. PART NAME MATERIAL12345678
10111213141516171819212223243132333435
BODYCAPLOWER COVERBALLSEAT RETAINERSTEMLOWER STEMLANTERN RINGCAP BOLTNUTLOWER COVER BOLTPAD BOLTSEAT RINGPACKINGCAP GASKETLOWER COVER GASKETFIRE SAFE SEALTHRUST BEARINGSTEM BEARINGLOWER STEM BEARINGPAD BEARINGO-RINGSPRINGPINGEAR BOXSTEM SEALANT FITTINGDRAIN PLUG
A216-WCBA216-WCBA216-WCBA351-CF8MA351-CF8MA276-316A276-316A276-316A193-B7A194-2HA193-B7A193-B7RTFEGRAPHITEGRAPHITEGRAPHITEGRAPHITEDU-BUSHDU-BUSHDU-BUSHDU-BUSHVITONINCONEL-X750316SSDUCTILE316SS316SS
STANDARD MATERIAL SPECIFICATIONS
L
H (A
PPRO
X)
W1
ød
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
PK_110
TRUNNION BALL, FULL BORE ASME CLASS 150#, 300#, 600#
PK_114
DIMENSION AND WEIGHTCLASS 150 UNIT : mm
10254533546559356500272
12305610622635415500473
14337686698762485560571
16387762775838550560875
18438864876914598710938
20489914927991640710
1525
24591
106710791143745800
2152
SIZE
L
Ød
HW
WEIGHT(kg)
B
RFRTJBW
CLASS 300 UNIT : mm
10254568584559362500303
12305648664635420500502
14337762778762490560602
16387838854838555560
1005
18438914930914603710
1158
20489991
1010991645710
1825
24591
114311651143750800
2558
SIZE
L
Ød
HW
WEIGHT(kg)
B
RFRTJBW
CLASS 600 UNIT : mm
10254787791787425560552
12305838841838475560787
14337889892889540630849
16387991994991610710
1489
18438
109210951092655800
2172
20489
119412001194710800
2628
24591
139714061397815900
3392
SIZE
L
Ød
HW
WEIGHT(kg)
B
RFRTJBW
PK_111PK_115
NO. PART NAME MATERIAL123456789
1011121416171820252627282933343536
BODYCAPBALLSTEMSEAT RINGPACKINGCAP GASKETGLAND GASKETFIRE SAFE SEALSEAT RETAINERTRUNNION PLATEGLANDSTEM BEARINGTRUNNION BEARINGPAD BEARINGTHRUST BEARINGO-RINGCAP BOLTNUTGLAND BOLTPAD BOLTPINSPRINGGEAR BOXSTEM SEALANT FITTINGDRAIN PLUG
A216-WCB or A105A216-WCB or A105A351-CF8MA276-316RTFEGRAPHITEGRAPHITEGRAPHITEGRAPHITEA351-CF8MA105+ENPAISI-1020DU-BUSHDU-BUSHDU-BUSHDU-BUSHVITONA193-B7A194-2HA193-B7A193-B7A276-316INCONEL-X750DUCTILE316SS316SS
STANDARD MATERIAL SPECIFICATIONS
L
H (A
PPRO
X)
W1
ød
PK_112
TRUNNION BALL, FULL BORE ASME CLASS 150#, 300#, 600#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
PK_116
DIMENSION AND WEIGHTCLASS 150 UNIT : mm
16387762775838503560870
18438864876914515710
1210
20489914927991553710
1850
24591
106710791143585800
3180
26635
1143-
1245685800
3770
28686
1244-
1346723900
4635
30737
1295-
1397778900
5370
32781
1371-
1524906900
6960
34832
1473-
1626920900
7950
36876
1524-
1727955900
8950
SIZE
L
Ød
HW1
WEIGHT(kg)
B
RFRTJBW
CLASS 300 UNIT : mm
16387838854838513560
1480
18438914930914525710
1685
20489991
1010991565710
2290
24591
114311651143595800
3610
26635
124512701245705800
4810
28686
134613721346745900
5920
30737
139714221397798900
6740
32781
152415531524926900
8080
34832
162616541626940900
9260
36876
172717561727975900
10280
SIZE
L
Ød
HW1
WEIGHT(kg)
B
RFRTJBW
CLASS 600 UNIT : mm
16387991994991518710
1580
18438
109210951092535800
2180
20489
119412001194575800
2780
24591
139714061397605900
3930
26635
144814601448615800
5830
28686
154915621549755900
6940
30737
165116641651815900
8560
32781
177817941778940900
9940
34832
193019461930956900
11570
36876
208320982083995900
13530
SIZE
L
Ød
HW1
WEIGHT(kg)
B
RFRTJBW
PK_113PK_117
H (A
PPRO
X)
W
L
H (A
PPRO
X)
W1
ød
NO. PART NAME MATERIAL123456789
11121314151617192021232829303132333536
BODYCAPBALLSTEMLOWER STEMSEAT POCKETSEAT RETAINERLOWER COVERGLANDSEAT RINGPACKINGCAP GASKETLOWER COVER GASKETGLAND GASKETSEAT POCKET SEALSTEM BEARINGPAD BEARINGLOWER STEM BEARINGTHRUST BEARINGO-RINGCAP BOLTNUTLOWER COVER BOLTGLAND BOLTPAD BOLTPINSPRINGGEAR BOX
A216 WCB or A105A216-WCBA351-CF8MA564-630A564-630A351-CF8MA351-CF8MA105AISI-1020NYLONGRAPHITEGRAPHITEGRAPHITEGRAPHITEGRAPHITEDU-BUSHDU-BUSHDU-BUSHDU-BUSH / PTFEVITONA193-B7A194-2HA193-B7A193-B7A193-B7A276-316INCONEL-X750DUCTILE
STANDARD MATERIAL SPECIFICATIONS
PK_114
TRUNNION BALL, FULL BORE ASME CLASS 900#, 1500#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
PK_118
CLASS 900 UNIT : mm
250
36837136820515530030052.0
376
38138438123517840030081.0
4100457460457270264500400
170.0
6152610613610
-325
-630
390.0
8203737740737
-355
-630
640.0
10254838841838
-450
-630
1070.0
12305965968965
-520
-630
1610.0
SIZE
L
Ød
HH1W
W1WEIGHT(kg)
B
RFRTJBW
CLASS 1500 UNIT : mm
250
36837136820516030030052.0
376
470473470240183400300
105.0
4100546549546275270500400
205.0
6152705711705
-350
-630
525.0
8203832841832
-410
-630
880.0
10254991
1000991
-465
-710
1560.0
12305
113011461130
-565
-710
2355.0
SIZE
L
Ød
HH1W
W1WEIGHT(kg)
B
RFRTJBW
DIMENSION AND WEIGHT
PK_115PK_119
NO. PART NAME MATERIAL123456789
1011121416171820252627282933343536
BODYCAPBALLSTEMSEAT RINGPACKINGCAP GASKETGLAND GASKETFIRE SAFE SEALSEAT RETAINERTRUNNION PLATEGLANDSTEM BEARINGTRUNNION BEARINGPAD BEARINGTHRUST BEARINGO-RINGCAP BOLTNUTGLAND BOLTPAD BOLTPINSPRINGGEAR BOXSTEM SEALANT FITTINGDRAIN PLUG
A216 WCB or A105A216 WCB or A105A351-CF8MA276-316RTFEGRAPHITEGRAPHITEGRAPHITEGRAPHITEA351-CF8MA105+ENPAISI-1020DU-BUSHDU-BUSHDU-BUSHDU-BUSHVITONA193-B7A194-2HA193-B7A193-B7A276-316INCONEL-X750DUCTILE316SS316SS
STANDARD MATERIAL SPECIFICATIONS
L
H (A
PPRO
X)
W1
ød
PK_116
TRUNNION BALL, FULL BORE ASME CLASS 900#, 1500#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
PK_120
DIMENSION AND WEIGHTCLASS 900 UNIT : mm
8203737740737396630645
10254838841838485710
1070
12305965968965531800
1610
14324
102910381029600900
1560
16375
113011401130620900
2240
18425
121912321219700900
3000
20473
132113331321750
10004360
24571
154915681549840
10007030
SIZE
L
Ød
HW1
WEIGHT(kg)
B
RFRTJBW
CLASS 1500 UNIT : mm
8194832841832410630880
10241991
1000991495710
1560
12289
113011461130565800
2355
14317
125712761257605900
3020
16362
138414061384625900
4260
18407
153715591537710900
6400
20457
166416861664760
10009300
24534
204320712043850
100014550
SIZE
L
Ød
HW1
WEIGHT(kg)
B
RFRTJBW
PK_117PK_121
NO. PART NAME MATERIAL12345678
10111213141516171819212223243132333435
BODYCAPLOWER COVERBALLSEAT RETAINERSTEMLOWER STEMLANTERN RINGCAP BOLTNUTLOWER COVER BOLTPAD BOLTSEAT RINGPACKINGCAP GASKETLOWER COVER GASKETFIRE SAFE SEALTHRUST BEARINGSTEM BEARINGLOWER STEM BEARINGPAD BEARINGO-RINGSPRINGPINGEAR BOXSTEM SEALANT FITTINGDRAIN PLUG
A216-WCBA216-WCBA216-WCBA351-CF8MA351-CF8MA276-316A276-316A276-316A193-B7A194-2HA193-B7A193-B7RTFEGRAPHITEGRAPHITEGRAPHITEGRAPHITEDU-BUSHDU-BUSHDU-BUSHDU-BUSHVITONINCONEL-X750316SSDUCTILE316SS316SS
STANDARD MATERIAL SPECIFICATIONS
ød1
ød
L
H (A
PPRO
X)
W1
PK_118
TRUNNION BALL, REDUCED BORE ASME CLASS 150#, 300#, 600#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
PK_122
DIMENSION AND WEIGHTCLASS 150 UNIT : mm
10254203533546559325400230
12305254610622635356500282
14337254686698762356500478
16387305762775838415500583
18438337864876914485560889
20489387914927991550560954
24591489
106710791143640710
1652
30737591
1295-
1397745800
4450
SIZE
L
ØdØd1
HW1
WEIGHT(kg)
B
RFRTJBW
CLASS 300 UNIT : mm
10254203568584559325400280
12305254648664635362500312
14337254762778762362500521
16387305838854838420500623
18438337914930914490560
1025
20489387991
1010991555560
1180
24591489
114311651143645710
1950
30737591
139714221397745800
6100
SIZE
L
ØdØd1
HW1
WEIGHT(kg)
B
RFRTJBW
CLASS 600 UNIT : mm
10254203787791787335400350
12305254838841838425560605
14337254889892889425560820
16387305991994991475560980
18438337
109210951092540630
1805
20489387
119412001194610710
2480
24591489
139714061397710800
3800
30737591
165116641651815900
5910
SIZE
L
ØdØd1
HW1
WEIGHT(kg)
B
RFRTJBW
PK_119PK_123
NO. PART NAME MATERIAL123456789
1011121416171820252627282933343536
BODYCAPBALLSTEMSEAT RINGPACKINGCAP GASKETGLAND GASKETFIRE SAFE SEALSEAT RETAINERTRUNNION PLATEGLANDSTEM BEARINGTRUNNION BEARINGPAD BEARINGTHRUST BEARINGO-RINGCAP BOLTNUTGLAND BOLTPAD BOLTPINSPRINGGEAR BOXSTEM SEALANT FITTINGDRAIN PLUG
A216-WCB or A105A216-WCB or A105A351-CF8MA276-316RTFEGRAPHITEGRAPHITEGRAPHITEGRAPHITEA351-CF8MA105+ENPAISI-1020DU-BUSHDU-BUSHDU-BUSHDU-BUSHVITONA193-B7A194-2HA193-B7A193-B7A276-316INCONEL-X750DUCTILE316SS316SS
STANDARD MATERIAL SPECIFICATIONS
ød1
ød
L
H (A
PPRO
X)
W1
PK_120
TRUNNION BALL, REDUCED BORE ASME CLASS 150#, 300#, 600#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
PK_124
DIMENSION AND WEIGHTCLASS 150 UNIT : mm
16387305762775838415500730
18438337864876914435630
1025
20489387914927991503710
1210
24591489
106710791143553710
2100
30737591
1295-
1397585800
3430
36876737
1524-
1727778900
6450
SIZE
L
ØdØd1
HW1
WEIGHT(kg)
B
RFRTJBW
CLASS 300 UNIT : mm16387305838854838420500
1010
18438337914930914440630
1420
20489387991
1010991510710
1729
24591489
114311651143560710
2750
30737591
139714221397590800
4630
36876737
172717561727785900
8330
SIZE
L
ØdØd1
HW1
WEIGHT(kg)
B
RFRTJBW
CLASS 600 UNIT : mm
16387305991994991425710
1360
18438337
109210951092445710
1580
20489387
119412001194518800
2170
24591489
139714061397575800
3390
30737591
165116641651605900
5910
36876737
208320982083815900
10560
SIZE
L
ØdØd1
HW1
WEIGHT(kg)
B
RFRTJBW
PK_121PK_125
H (A
PPRO
X)
W
ød1
ød
L
H1
(APP
ROX)
W1
NO. PART NAME MATERIAL123456789
11121314151617192021232829303132333536
BODYCAPBALLSTEMLOWER STEMSEAT POCKETSEAT RETAINERLOWER COVERGLANDSEAT RINGPACKINGCAP GASKETLOWER COVER GASKETGLAND GASKETSEAT POCKET SEALSTEM BEARINGPAD BEARINGLOWER STEM BEARINGTHRUST BEARINGO-RINGCAP BOLTNUTLOWER COVER BOLTGLAND BOLTPAD BOLTPINSPRINGGEAR BOX
A216 WCB or A105A216-WCBA351-CF8MA564-630A564-630A351-CF8MA351-CF8MA105AISI-1020NYLONGRAPHITEGRAPHITEGRAPHITEGRAPHITEGRAPHITEDU-BUSHDU-BUSHDU-BUSHDU-BUSH / PTFEVITONA193-B7A194-2HA193-B7A193-B7A193-B7A276-316INCONEL-X750DUCTILE
STANDARD MATERIAL SPECIFICATIONS
PK_122
TRUNNION BALL, REDUCED BORE ASME CLASS 900#, 1500#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
PK_126
DIMENSION AND WEIGHTCLASS 900 UNIT : mm
25038
36837136819514830030045.0
37650
38138438120515530030058.0
410076
457460457235178400300
105.0
6152100610613610270264500300
230.0
8203152737740737
-325
-400
470.0
10254203838841838
-355
-630
530.0
12305254965968965
-450
-630
1200.0
SIZE
L
ØdØd1
HH1W
W1WEIGHT(kg)
B
RFRTJBW
CLASS 1500 UNIT : mm
25038
36837136819514830030045.0
37650
47047347020516030030075.0
410076
546549546240183400300
130.0
6152100705711705275270500300
301.0
8203152832841832
-350
-400
615.0
10254203991
1000991
-410
-630
1085.0
12305254
113011461130
-465
-630
1850.0
SIZE
L
ØdØd1
HH1W
W1 WEIGHT(kg)
B
RFRTJBW
PK_123PK_127
NO. PART NAME MATERIAL123456789
1011121416171820252627282933343536
BODYCAPBALLSTEMSEAT RINGPACKINGCAP GASKETGLAND GASKETFIRE SAFE SEALSEAT RETAINERTRUNNION PLATEGLANDSTEM BEARINGTRUNNION BEARINGPAD BEARINGTHRUST BEARINGO-RINGCAP BOLTNUTGLAND BOLTPAD BOLTPINSPRINGGEAR BOXSTEM SEALANT FITTINGDRAIN PLUG
A216 WCB or A105A216 WCB or A105A351-CF8MA276-316RTFEGRAPHITEGRAPHITEGRAPHITEGRAPHITEA351-CF8MA105+ENPAISI-1020DU-BUSHDU-BUSHDU-BUSHDU-BUSHVITONA193-B7A194-2HA193-B7A193-B7A276-316INCONEL-X750DUCTILE316SS316SS
STANDARD MATERIAL SPECIFICATIONS
ød1
ød
L
H (A
PPRO
X)
W1
PK_124
TRUNNION BALL, REDUCED BORE ASME CLASS 900#, 1500#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
PK_128
DIMENSION AND WEIGHTCLASS 900 UNIT : mm
8203152737740737375630470
10254203838841838396630530
12305254965968965485710
1200
14324305
102910381029531800
1695
16375305
113011401130531800
1790
18425324
121912321219600900
2240
20473375
132113331321620900
2970
24571473
154915681549750
10005580
SIZE
L
ØdØd1
HW1
WEIGHT(kg)
B
RFRTJBW
CLASS 1500 UNIT : mm
8194146832841832320630615
10241194991
1000991410630
1085
12289241
113011461130495710
1850
14317289
125712761257565800
2620
16362289
138414061384565800
2890
18407317
153715591537605900
5348
20457362
166416861664625900
6950
24534457
204320712043760
100011520
SIZE
L
ØdØd1
HW1
WEIGHT(kg)
B
RFRTJBW
PK_125PK_129