Upload
air-repair-llc
View
32
Download
3
Embed Size (px)
DESCRIPTION
Operating principle The cyclone separator works according to the mass inertia principle. It consists of a vortex cartridge and a reservoir. The vortex cartridge induces the compressed air into rotary movement. Solid and liquid components in the air are forced against the inside walls of the separator by their own mass inertia. This causes heavy particles of dirt and water to separate and flow into the collection reservoir.LAYOUT The cyclone separator is ideally suited as a bulk water separator when located before a refrigerant dryer or directly after the compressor if no air receiver is used; or if it is placed at a distance; or if the compressed air supply pipe is mounted vertically.MINIMAL PRESSURE LOSS There is a minimal pressure loss across a cyclone separator which means that operating pressure is always optimised – saving energy.EFFICIENCY Apart from the drain, the cyclone separator operates wear free because there are no moving parts which means increased output of the compressed air treatment system.BEKOMAT An electronically level controlled, loss-free, Bekomat condensate drain can be fitted as an option assuring increased compressed air treatment safety.Maintenance free filtration: The BOGE heavy-duty cyclone separators takes liquids, aerosols and solids from the compressed air. Based on the law of inertia they operate with practically no maintenance – ideally suited for compressed air systems without an air receiver when directly installed downstream of the compressor.Air Repair, LLC specializes in air compressor repair, sales and service for oil injected rotary screw air compressors, oil free rotary screw air compressors, piston air compressors, refrigerant dryers, desiccant dryers, absorption dryers, and nitrogen generators in West Virginia, Maryland, Ohio and Pennsylvania. We are a distributor for Boge Air Compressors, FS Curtis Air Compressors and Rollair Air Compressors. Air Repair, LLC is an authorized dealer in specialized aluminum air piping from PREVOST Air Piping. Air Repair, LLC is a warranty service station for the following air compressor and air tool and manufacturers: STANLEY BLACK & DECKER, PORTER CABLE, and DeVILLBLISS. Air Repair, LLC offers complete service and repair for the following air compressor manufacturers: BOGE AIR COMPRESSORS, FS-CURTIS AIR COMPRESSORS, ROLAIR SYSTEMS AIR COMPRESSORS, SULLAIR AIR COMPRESSORS, QUINCY AIR COMPRESSORS, INGERSOLL RAND AIR COMPRESSORS, KAESER AIR COMPRESSORS, CHAMPION AIR COMPRESSORS, ATLAS COPCO AIR COMPRESSORS, GARDNER DENVER AIR COMPRESSORS, and CAMPBELL HAUSFELD AIR COMPRESSORS.http://www.airrepairllc.com
Citation preview
Z 20N – Z 183N Z 275 – Z 375
20 BOGE AIR. THE AIR TO WORK.
Cyclone separator Z 20N to Z 375
BEKOMAT
An electronically level controlled, loss-free,
Bekomat condensate drain can be fi tted as
an option assuring increased compressed air
treatment safety.
EFFICIENCY
Apart from the drain, the cyclone separator
operates wear free because there are no
moving parts which means increased output
of the compressed air treatment system.
MINIMAL PRESSURE LOSS
There is a minimal pressure loss across
a cyclone separator which means that
operating pressure is always optimised
– saving energy.
LAYOUT
The cyclone separator is ideally suited as a
bulk water separator when located before a
refrigerant dryer or directly after the compressor
if no air receiver is used; or if it is placed at a
distance; or if the compressed air supply pipe is
mounted vertically.
Operating principle
The cyclone separator works according
to the mass inertia principle. It consists
of a vortex cartridge and a reservoir.
The vortex cartridge induces the
compressed air into rotary movement.
Solid and liquid components in the air
are forced against the inside walls of
the separator by their own mass inertia.
This causes heavy particles of dirt and
water to separate and fl ow into the
collection reservoir.
Z 20N – Z 183N
Z 275 – Z 375
21 Compressed Air Treatment | Filters
Maintenance free fi ltration: The BOGE heavy-duty cyclone separators
takes liquids, aerosols and solids from the compressed air. Based on
the law of inertia they operate with practically no maintenance – ideally
suited for compressed air systems without an air receiver when directly
installed downstream of the compressor.
BOGE
Type
Flow capacity*
m3/min at
Compressed
air connection
Max. operating
pressure
Dimensions
A B
8 bar 10 bar 13 bar bar mm mm
Z 20N 2.20 2.80 3.50 G 1⁄2 16 103 238
Z 35N 3.85 4.90 6.13 G 3⁄4 16 139 324
Z 53N 5.87 7.47 9.33 G 1 16 139 324
Z 75N 8.25 10.50 13.13 G 11⁄2 16 190 528
Z 125N 13.75 17.50 21.88 G 2 16 190 528
Z 183N 20.17 25.67 32.08 G 2 16 190 528
Z 275 30.25 38.50 48.13 G 21⁄2 16 180 580
Z 375 41.25 52.92 65.63 G 3 16 180 580
* relates to the compressor’s intake condition (+ 20°C, 1 bar)