Contact: Tim Peer, P.E.

Vice President District Energy

607-592-2198

tpeer@bondbrothers.com

DISTRICT ENERGY SERVICES

DISTRICT ENERGY AT A GLANCE

We are not just a construction management firm. The District Energy Division of BOND is a team of professionals that has integrated the core strengths of the BOND construction management philosophy into years of experience constructing, commissioning, operating and maintaining utility (district energy) systems. With extensive college, university and healthcare experience, we understand the difficulties and nuisances of constructing and operating these types of facilities in those environments. At BOND we put that experience to work for our clients by:

WHAT MAKES BOND UNIQUE IN THE DISTRICT ENERGY MARKET?

OUR PARTNER ASSOCIATIONS

� Incorporating operations and maintainability into our design reviews

� Challenging the Project Team at all stages to review and include site specific commissioning requirements in the design

� Developing a schedule that incorporates the tasks that are unique to utility installations including permitting equipment delivery, design-construction sequencing and realistic commissioning timing/durations

� Budgeting that includes trades, vendors and specialty contractors required to construct, pre-test and commission utility grade mechanical, electrical and controls systems

� Working with the critical constituencies such as the interconnecting utility, permitting & approval agencies and fuel suppliers

� Developing a logistics plan that incorporates the challenges of working in operating facilities that must continue to deliver steam, chilled water and power even during construction

� Working with the plant operations and maintenance staff to incorporate their institutional knowledge and expertise

� Understanding and analyzing future expansion needs in the initial equipment sizing and subsequent design reviews

� Outlining the project turnover requirements early in a manner that supports and seamlessly integrates into the long-term needs of the client

� Supporting the project after turnover to the owner with ongoing operator training and support as may be desired

� Central Energy Plants � Chillers / Boiler Upgrades � Cogeneration / Trigeneration � Thermal Distribution Piping � Microgrid Integration

DISTRICT ENERGY SOLUTIONS

DISTRICT ENERGY SERVICES PROGRAM MANAGEMENT

The experienced professionals at BOND can provide comprehensive program management and consulting services for district heating, district cooling, and microgrid systems. BOND’s team has extensive experience related to engineering, energy master planning, and central plant operations. This diverse expertise can be put to work for a concept through completion approach to project delivery or to develop operational refinements to improve performance. The goal

of this program is to achieve operational excellence and meet the Owner’s goals of Safety, Reliability, and Efficiency.

BOND’s services are specifically tailored to the client’s needs and desired outcomes. The goal is to determine which strategic investments and improvements are needed to achieve operational excellence, then assist the owner to implement and validate the supporting projects. The service offerings can include, but are not limited to, the following:

PROJECT DEFINITION

PROJECT EXECUTION

PROJECT VALIDATION

PROGRAM MANAGEMENT

Operations & Maintenance: Utility Expense Analysis & Procurement Support

Environmental Health & Safety Training

Training Program Development Operating Procedure Development

O&M Readiness Programs Condition Assessments Deferred Maintenance Planning

Capital Projects: Preconstruction Services Project Controls Design Build Construction Management (@Risk, Agency CM)

General Contracting Start-Up & Commissioning

Support Services: Feasibility Studies Project Management Consulting & Technical Oversight Site Assessments & Evaluations 3D Laser Scanning & Logistic Planning Permitting Support Technical Consulting & 3rd Party Reviews Asset Management Programs Capital Plan Estimating & Development Procurement & Materials Management QA/QC Plan Development & Oversight Start-Up Supervision Manufacturer Inspections & Factory Acceptance Testing (FAT) Oversight

Facilitation of 3rd Party & Alternative Financing Options

Commissioning Plans

OPERATIONAL EXCELLENCE

BOND VIRTUAL DESIGN & CONSTRUCTION

COLLABORATIVE TECHNOLOGIESWe believe whole-heartedly in the power of innovation to drive communication and collaboration. As Virtual Design & Construction (VDC) trends transform our industry, BOND leads the market in integrating latest technologies into our projects. From the corporate-wide utilization of Building Information Modeling (BIM) to cutting-edge existing building laser scanning, BOND leverages technology to provide value to our clients.

BUILDING INFORMATION MODELING—A CORPORATE STANDARDBOND’s use of BIM promotes the development of a common set of project goals, minimizing risk before construction begins in the field. Our shared 3D models facilitate a new level of transparency between BOND, our design & engineering partners, and our clients. Utilizing this powerful visualization tool, we virtually enact the building process to resolve design conflicts early, enhancing schedule efficiency and lowering cost. Perhaps most importantly, BIM serves as an excellent communication tool, spurring interaction between all members of our project teams and making the construction process easy. With 3D models, our clients can virtually “walk through” their project, proposing changes and understanding how design impacts outcome long before groundbreaking clients.

IN-HOUSE LASER SCANNINGOur in-house laser scanning capabilities have proven to be tremendously valuable to our clients, setting our teams up for success by providing the most accurate as-built documentation for fit-out and renovation work. We convert scan data into 3D Revit models, compatible with design and engineering models, to provide clash detection and logistics and safety planning services for our clients. During construction, laser scanning serves as a corporate quality control tool with a focus on proper installation and future facilities asset management.

GOING BEYOND BIMWe offer an in-house Virtual Design & Construction (VDC) Department to help our clients build more efficiently in today’s world. BOND integrates BIM into a company-wide technology platform. We streamline our estimates through On Screen Take-Off (OST), simulate our schedules through Primavera P6 Scheduling, provide critical pick planning to sequence work, and deliver 3D field layouts with the latest GPS technology.

3D Logistics Planning & Reviews Model-Enhanced Estimates 3D Laser Scanning & Modelling Clash Detection Advanced Schedule Simulation Critical Pick Planning

Enhance Communication & Collaboration Accelerate Project Schedule Lower Cost Improve Overall Quality Minimize Risk Resolve Design Conflicts Eliminate Surprises Reduce Errors Facilitate Long-Term Equipment Access & Maintenance

VDC BENEFITSVDC SERVICES

BIM Model View

FINANCIAL

∙ Capital Cost Estimating ∙ Utility Expense Analysis ∙ Operations & Maintenance Costs

Assessments ∙ Operational Modelling Comparing Options

with Financial Metrics (SPB, NPV, ROI) ∙ Monte Carlo Simulations (@RISK Modelling) ∙ Research & Application Writing for Financial

Incentive Programs

MECHANICAL

∙ Energy Curve Development, Analysis, & Optimal Equipment Sizing

∙ Load Growth Forecasting, Scenario Development, & Firm Capability Analysis

∙ Heat & Mass Balance Assessments (Thermoflex Modelling)

∙ Preliminary Equipment Lists & Specifications ∙ Preliminary Concept Drawings Including:

Process Flow Diagrams, P&IDs, & General Arrangements

∙ Fuel Assessments

ELECTRICAL

∙ Review of Utility Interconnection Process ∙ Preliminary Short Circuit & Utility Impact

Analysis (ETAP Modelling) ∙ Preliminary Protection & Coordination

Review ∙ Preliminary Equipment Lists & Specifications ∙ Preliminary Concept Drawings Including:

Single Line Diagrams, Controls Architecture, & General Arrangements

SITE / CIVIL

∙ Preliminary Cut, Fill, & Grading Plans ∙ Preliminary Structural Design Criteria ∙ Preliminary Structural & Foundation Review

or Design ∙ Site Access & Construction Staging Review

The experienced professionals at BOND can provide initial feasibility assessments, analysis, and conceptual designs for steam, chilled water, and combined heat & power (CHP) projects. These range from central plant upgrades, renewal, and analysis of CHP alternatives to upgrades and expansion of thermal or electrical distribution systems. The BOND approach is to develop early concept level budgets and schedules that are truly representative of the technical options being considered. Couple this with BOND’s working knowledge and relationships with the gas and electric utilities, and our ability to bring a level of realism to the early feasibility analysis provides critical insight to support sound decision-making. The BOND approach mitigates risks associated with future budget or schedule unforeseens related to the Owner’s selected technology option. BOND can also deliver the selected technology option via a design/build arrangement. This method provides a focused management process around project risks while obtaining a competitive solicitation for the major cost centers.

The BOND team has staff with extensive experience related to engineering, energy master planning, and central plant operations. Having this significant depth of engineering and operational experience on the team conducting the early feasibility analysis is invaluable to sound decision-making. BOND has the right team and experience to assist you with charting your energy future.

FEASIBILITY ASSESSMENTS

PERMITTING & SUPPORT

∙ Conceptual Project Schedule ∙ Existing Conditions Assessment ∙ Zoning & Local Ordinance Review ∙ Photo Simulations for Visual Impact Analysis ∙ Work Sequencing Simulations for Traffic or

Operational Impact Analysis ∙ CHP Emission Reduction Summary ∙ Preliminary Emission Rates & Preliminary Air

Permitting Review

DISTRICT ENERGY SERVICES FEASIBILITY ASSESSMENTS

The experienced professionals at BOND can provide Design-Build (DB) delivery for steam, chilled water, and combined heat & power projects. District energy and central plant related projects are not simple construction undertakings. They require a specialized team with the right skills and experience to ensure a seamless transition within the operating facility. Our team has a focused expertise on managing the critical components of these projects thus allowing the customer to stay focused on their core business needs.

The BOND team will design, build, and commission any central plant project including chillers, boilers, CHP (combustion turbine, steam turbine, or reciprocating engine) while the customer stays focused on their job. Our team understands the complexity of these undertakings. We have in-depth knowledge of the operations, engineering design, utility interconnections, environmental & local permitting, regulatory issues, fuel sourcing, construction, and commissioning.

The DB project delivery model is best suited for customers who want a single point of contact for the project. The BOND approach is a disciplined process to develop, design, and deliver projects on an expedited delivery schedule. This will allow the operational savings to be realized much earlier than alternative project delivery methods. The BOND process ensures consistent oversight and careful monitoring of quality, cost, and, schedule.

Engineering – BOND has worked with the premier engineering firms in this field and can solicit the design services competitively or work with the Owner’s incumbent engineer. Our approach is to select the right engineering team based on their current workload, project location, and any specialized requirements of the Owner or interconnecting utility company.

Equipment - BOND has a solid working relationship with the major equipment suppliers. Our team will work with the Owner to obtain a competitive price from their pre-selected equipment suppliers or conduct a competitive solicitation process.

Subcontractors – BOND maintains an extensive list of prequalified subcontractors. This ensures a competitive solicitation using construction partners that have the bandwidth to support the work and live up to the BOND standards of quality and performance. BOND will also work with the Owner to prequalify bidders from their pool of trusted subcontractors.

INVESTMENTGRADE ANALYSIS

FEASIBILITYSCREENING

DESIGN

CONSTRUCTION

START-UP

Low cost investigation to justify investment grade evaluationBroad approach to options

Full 8760 modellingDetailed optionsFully developed Owner’s program and basis of initial GMP proposalGo/No-Go Decision

Equipment procurement3D modellingInitial interconnect submissionLocal permittingAir permitting

Utility interconnectionEquipment deliveriesCoordination and risk management with existing operation

Compliance testingTrainingPerformance verificationTurnover documentation

DISTRICT ENERGY SERVICES DESIGN-BUILD

Using this project delivery method, BOND will provide the Owner with market competitive construction management services. In this case, BOND is responsible for managing all aspects of detail design and construction while ensuring the Owner’s goals in terms of quality, scope, cost, and schedule are met. For the customer, this process will:

1. Reduce project risk2. Deliver predictable results3. Allow the customer to stay focused on their core business

Projects can be completed open book or with a GMP. As shown on the chart of typical cost centers, the sole-sourced component of the work is relatively small. This factor will be countered with the savings associated with a faster project delivery.

Indicative Scale of the Different Cost Centers for a

Typical CHP Project