8/28/2014 Bootable usb pendrive using cmd - Bootable USB | Bootable USB

http://bootableusb.net/bootable-usb-pendrive-using-cmd/ 1/6

Search This Site...Home Privacy Sitemap Advertise Terms of use Contact US

Home Bootable USB » Flash DIsk Flash Drive Flash Memory Pendrive Reviews USB Stick

Home Bootable USB Bootable usb pendrive using cmd

Posted by bootable | 83 comments

Bootable usb pendrive using cmd

Creating a usb

pendrive using command

prompt is not hard, it is one

of the most common ways to

create a bootable usb.

This method does not

work if your operating sistem

is windows xp or windows 8 ,

you cannot select the primary

partition in comand prompt.

You just need to follow these simple steps:

1. First step is to obtain the windows files from somewhere and save them to a folder in your

pc. You can rip a windows dvd , or if you have the iso image file you can open it with magic

disc or daemon tools or even winrar , and you need to copy the whole content to a folder

anywhere in your pc , you just need to make sure you know where it is located.

2. Make sure your usb stick is inserted, go to start search cmd , right click the file and select

run as administrator. The command prompt will appear, now you need to write the

following comands:

3. diskpart→list disk→select disk 1(chose the usb device, you will recognize it by its

size)→clean(this will erase the usb)→create partition primary→select partition

1→active→format fs=ntfs(this will format the usb drive and will take 10-15 minutes)→

Popular Recent Random

Install Windows 7 from aUSB drive the very easywayPosted in Bootable USB, USB Drive,

Windows 7

WED06

Bootable usb pendriveusing cmdPosted in Bootable USB, ISO, Pendrive,

USB Drive, USB Stick, Windows 7,

Windows 8

THU29

Make a Bootable ExternalHard Drive and InstallWindows 7/8Posted in Bootable USB, External Hard

Drive, Flash Drive, Windows 7, Windows

8

SAT11

Install Windows or Ubuntufrom usb drive using RufusPosted in Bootable USB, Flash Drive,

Flash Memory, ISO, Linux, Pendrive, USB

Drive, USB Stick, Windows 7, Windows 8

FRI24

Advertising

8/28/2014 Bootable usb pendrive using cmd - Bootable USB | Bootable USB

http://bootableusb.net/bootable-usb-pendrive-using-cmd/ 2/6

4. After the format is done you have to continue writting in command promt : →assign(now

you will notice that the usb drive changed its letter to (H): or (G))→exit(this command will

exit the disk part function)

5. Now you have to write the path to the executable file in your windows saved folder , make

sure that in your windows folder you have the boot folder with the bootsect executable file.

6. In my case the command goes like this: E:→cd win 7 sp1→

→cd boot→bootsect.exe/nt60 h:(h is the letter of the usb drive ,this

comand will update the boot core)→exit (this will exit command prompt).

Bootable USB Recommend:

Recent Comments

Sunny on Make a BootableExternal Hard Drive and InstallWindows 7/8

amar on Bootable usb pendriveusing cmd

Paul on Install Windows 7 from aUSB drive the very easy way

8/28/2014 Bootable usb pendrive using cmd - Bootable USB | Bootable USB

http://bootableusb.net/bootable-usb-pendrive-using-cmd/ 3/6

83 Comments

← Older Comments

Thank you very much…

1. Now you have to copy all the files in the windows folder to your usb drive.

2. ALL DONE. You can now restart your pc and boot from the usb hard drive.

wazi ahmad August 15, 2014

rusty on Install Windows 7 from aUSB drive the very easy way

ochiroo on Install Windows 7from a USB drive the very easyway

Nikhil on Install Windows 7 from aUSB drive the very easy way

8/28/2014 Bootable usb pendrive using cmd - Bootable USB | Bootable USB

http://bootableusb.net/bootable-usb-pendrive-using-cmd/ 4/6

Good.

But use this to save some time format fs=ntfs quick

Very nice info

but is it compulsory to set the bootsect path ?

like you can see I’ve wrote this post and i guess we can us Bootable Pen

Drive without setting the BootSect Path.

Please refer this !

Nice one it works for me.

Thank you.

F:\Windows 7\boot>bootsect.exe/nt60 h:

Target volumes will be updated with BOOTMGR compatible bootcode.

Could not map drive partitions to the associated volume device objects:

Access is denied.

what should i do now???

REPLY

Lukas August 17, 2014

REPLY

Piyush August 19, 2014

REPLY

Abarao Bhople August 20, 2014

REPLY

mir August 21, 2014

8/28/2014 Bootable usb pendrive using cmd - Bootable USB | Bootable USB

http://bootableusb.net/bootable-usb-pendrive-using-cmd/ 5/6

thanx buddy keep it up

thank you so much.

it is showing it got copied but in pendrive it is showing nothing

← Older Comments

Post a Reply

Your email address will not be published. Required fields are marked *

Name *

Email *

Website

REPLY

mohsin August 22, 2014

REPLY

ziaul haque August 22, 2014

REPLY

amar August 27, 2014

REPLY

8/28/2014 Bootable usb pendrive using cmd - Bootable USB | Bootable USB

http://bootableusb.net/bootable-usb-pendrive-using-cmd/ 6/6

Comment

You may use these HTML tags and attributes: <a href="" title=""> <abbr title="">

<acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime="">

<em> <i> <q cite=""> <strike> <strong>

SUBMIT COMMENT

Home Privacy Sitemap Advertise Terms of use Contact US