Guarantee :Boral Plasterboard warrants goods manufactured and supplied by it to be of consistent quality and free from any defects. Any goods found to be defective will be replaced without charge.

The liability of Boral Plasterboard under this warranty is limited to (at the sole discretion of Boral Plasterboard) the replacement of goods or the supply of equivalent goods.

Boral Connecting Clip

Boral Soffit Bracket

Boral J-Channel

Boral Metal Angle

20mm x 37mm x 20mm @ 1220mm

Boral Universal Furring Channel

10mm Boral Unispan Plasterboard

610mm

1200mm

Recessed Edge

Square Edge

Yes

Yes

1220

2440

10mm = 7.0kg/m²

BS 1230 part 1, ASTM C-1396/C 1396M-09a

BS 476 part 4 / part 6 / part 7, ASTM C473

BORAL UnispanBORAL Unispan is a lightweight 10mm thickness resilient plasterboard. It is speciallyformulated as a Ceiling Lining for Framing Spacing at up to 610mm centers*. BORALUnispan has a superior anti-sag performance and is faster and easier to install due tothe fact that it is approximately 12% lighter than 12mm plasterboard and lessfasteners are required.

Product Data

The above lengths are standard sizes, Boral Plasterboard is able to produce any required sheet lengthdepending upon the order size.

How to specify this product:Supply and install BORAL Unispan 10mm as shown on the relevant drawings.BORAL Unispan must be installed and finished in accordance to manufacturer’sspecification.

For more information, please contact our technical service.

BORAL Unispan Commercial/Residential Ceiling System

Edge Details:

Width (mm):

Length (mm):

Weight:

Product Standard:

Product Testing:

Metric (mm) 10mmThickness

•

NOTE: Not recommended for external use.

8 Mercury AvenueBarangay Bagumbayan,

Quezon City 1110,Philippines

Tel: (632) 911 6709Fax: (632) 911 6709 ext. *98

Manila Office:(Servicing Luzon Area)

Unit 6,G/F Century Plaza Complex,

Juana Osmeña St.,Cebu City

Tel: (6332) 254 2772

www.usgboral.com

Boral Plasterboard

Philippines, Inc.

Cebu Office:(Servicing Visayas and Mindanao Areas)