Embed Size (px)
Citation preview
BORETS COMPANY
Borets suBmersiBle induction motors
Borets induction motors are hand-wound, two-pole, three-phase designs that operate at a full-load speed of 2900 rpm at 50 Hz or 3500 rpm at 60 Hz. Motors are filled with highly-refined dielectric oil that provides bearing lubrication and thermal conductivity.
operating conditionsParameter specification
Fluid temperature, °С (°F) 160 (320)
Fluid pressure at pump intake, psi up to 5690
Solids content, g/l up to 1
H2S concentration, g/l up to 1.25
Borets motors are available in a wide range of diameters, horsepower/voltage ratings, and special-purpose insulation materials, allowing for their application in hostile high-temperature environments.
Technical specifications
series Housing od 50 Hz 60 Hz sections number
mm in. kW HP kW HP
95 95 3.74 16 to 150 19 to 180 21 to 201 26 to 241 1 to 3
375 95.3 3.75 9 to 112 13 to 150 11 to 134 15 to 180 1 to 3
103 103 4.06 8 to 210 11 to 282 10 to 252 13 to 338 1 to 3
456 115.8 4.56 12 to 248 17 to 333 15 to 298 20 to 400 1 or 2
117 117 4.61 8 to 360 11 to 483 10 to 432 13 to 580 1 to 3
130 130 5.12 22 to 450 30 to 604 26 to 540 35 to 724 1 to 3
562 142.7 5.62 37 to 747 50 to 1000 45 to 896 60 to 1200 1 to 3
185 185 7.28 100 to 350 134 to 469 120 to 420 161 to 563 1
BORETS COMPANY
5, Moldavskaya st., Moscow, 121467, RussiaTel./Fax: + 7 495 660 - 21 - 90 e-mail: [email protected]
Borets also offers four-pole three-phase electric motors (1500 rpm at 50 Hz and 1800 rpm at 60 Hz).
Technical specifications
series Housing od 50 Hz 60 Hz sections numbermm in. kW HP kW HP
103 103 4.06 8 to 16 11 to 21 10 to 19 13 to 26 1
117 117 4.61 8 to 32 11 to 43 10 to 38 13 to 51 1
motor designs
two-Pole motormotor design Fluid Temperature, °С (°F)
Standard 110 (230)
Heat-Resistant 135 (275)
Extra Heat-Resistant 160 (320)
Corrosion-ResistantHousing external coating
350 micron thick stainless steelStainless steel coated
with epoxy varnish
Four-Pole motormotor design Fluid Temperature, °С (°F)
Standard 120 (250)
Corrosion-ResistantHousing external coating
350 micron thick stainless steelStainless steel coated
with epoxy varnish
