Bosch diy-au-en

Bosch Power Tools DIY Catalogue 2010

www.bosch-do-it.com.au

The Complete Power Tool Range

If you've used any of Bosch's lithium-ion garden tools and know about their many benefits, you'll be pleased to know that there's a lot more waiting for you in Bosch's DIY power tools range. In fact, much of Bosch's experience in bringing lithium-ion powered garden tools to market, such as cordless hedge trimmers, shears and the world's first lithium-ion powered lawn mower, the Rotak LI, was jointly acquired in the research and development of this comprehensive range of innovative tools.

Bosch has continued to develop and launch lithium-ion powered tools that make DIY projects easier and more enjoyable to take on. Bosch’s Uneo, for example, is very versatile, allowing you to hammer, drill and drive screws in any surface with just one tool. And Bosch’s lightweight and compact IXO, the world’s best-selling powertool to be powered by a lithium-ion battery. No other tool is handier and more popular for project requiring intricate fixing.

Many of Bosch’s DIY tools are ideal for outdoor projects. Another benefit to choosing Bosch is that the lithium-ion batteries on selected garden tools are interchangeable with those on certain Bosch power tools, meaning you can complete any job without losing valuable time.

As Bosch offers such a wide range of tools featuring this leading technology, you can embark on any project knowing that there’ll be a Bosch tool packed with all the features you need. So whether you’re drilling the decking or sanding it down, mowing the lawn or tidying up your shrubs and hedges, Bosch’s cordless tools with innovative lithium-ion technology offer unbeatable advantages and make house and garden projects a real pleasure.

Turn a house and a garden into your homeWith Bosch Lithium-Ion Technology

Full power at all times Reduced self-discharge, no memory effect: constant battery capacity over the entire lifetime. Always ready when you are thanks to lithium-ion technology.

Same power at half the size Due to the lithium-ion technology, the size and weight of the batteries are reduced by approx. 60% compared to conventional nickel cadmium batteries – although they offer the same amount of power.

High power, low weight Bosch cordless tools with lithium-ion technology impress with their very compact design, low weight and ease of use. This saves you a lot of effort when working.

Long lifetime The intelligent Electronic Cell Protection, Bosch ECP, protects the lithium-ion batteries against excessive temperatures and overload, therefore giving them a particularly long lifetime.

Compact, durable and quickly recharged Due to their short charge times, Bosch cordless tools with lithium-ion technology are ready to use quickly. They are also especially durable and last six times longer than conventional nickel cadmium batteries.

Li-Ion 85%

NiCd 0%

Battery charge after four months

on standby.

Lithium-ion technology at a glance:

3

Cordless Garden Tools 6–9Cordless endurance thanks to lithium-ion technology.

Secateurs 10

Shrub Shears 10

Mowers 11

Grass Trimmers 12

Hedgecutters 13

High Pressure Washers 14–15

Fine Spray Systems 16–17Paintbrushes ans drips were yesterday. Today we spray.

PMF 180 E 18–21The new all-rounder from Bosch.

Summary of contentsGarden Tools

Bosch tools for all occasions

Uneo

Rotary Hammer

Impact Drills

Cordless Drill/Drivers/ Screwdrivers

UNEO 29

Rotary Hammer 32

1-Speed Impact Drills 30

2-Speed Impact Drills 31

Cordless Drill/Drivers 22-23

Lithium-ion Cordless Drill/Drivers 24-25

IXO 26

Impact Driver 27

Lithium-ion Cordless 2-Speed Hammer Drills 28

4 Bosch Power Tools DIY 2010 Catalogue

Sanders

Angle Grinders All Purpose Vacuum Cleaner

Decoration Tools

Multifunction Tool

Digital Measuring ToolsSaws

Planer/Router

Orbital Sander 38

Random Orbital Sanders 39

Belt Sander 40

Multi-Sanders 41

Electric Tacker 48

Cordless Universal Cutter 49

Glue Gun 49

Heat Guns 50

Angle Grinders 42 All Purpose Vacuum Cleaner 51

Fine Spray Systems 47

Multifunction Tool 43

Digital Detectors 44

Digital Laser Rangefinders 45

Laser Spirit Level 46

Cross-Line Laser Levels 46

Jigsaws 33

All Purpose Saw 34

Circular Saw 35

Planer 36

Router 36

5

The cordless garden tools from Bosch.

Cordless endurance thanks to lithium-ion technology.

Bosch Rotak – the lawnmower revolution.

The first cordless lawnmower with the same power as a mains-powered mower. This means extremely high cutting power and extremely short charge times of only one hour. The powerful lithium-ion battery does not experience self-discharge or memory effect. Beyond comparison: 40% lighter than conventional lawnmowers, it makes particularly good cuts. Grass up to 30 cm long. Even close to edges thanks to the innovative grass combs.

The complete Bosch Lawnmower range can be found at a glance on Pages 11.


Lithium-ion batteries offer many advantages:

•More power at less weight•Best handling: up to 40% more

compact and 50% lighter than conventional cordless garden tools

•Reduced self-discharge and memory effect, so they are always ready for use

• Short charge times in comparison to conventional batteries

Now you can look forward to full cordless power and lightweight, handy tools!

A world first: Bosch Cordless Garden Tools with lithium-ion

technology are incredibly powerful, only half as heavy as con-

ventional cordless garden tools and, therefore, much easier to

handle – no cable, no petrol, no self-discharge and no memory

effect, so they are always ready for use. This makes gardening

work even more enjoyable.

Mowing lawns, shaping bushes, cutting hedges – all of these are much

easier to do if you have a constant supply of full cordless power. Due

to innovative technology and superior know-how, Bosch now also

offers its established reliability with modern lithium-ion batteries.

Special electronics ensure maximum lifetime of the lithium-ion garden

tools. And the energy reserves are swiftly replenished thanks to the

fast battery chargers.

This means that you finally have more energy for the most important

thing: designing your garden. Starting with the lawn. Whether wild

and meadowy or with graphically straight surfaces, lawns have to be

cared for. The Rotak Cordless Lawnmower is ideal for this. Its

innovative grass combs reliably guide grass growing close to walls

and edges towards the blade. And its motor has the same power as

a corded mower with the highest cutting strength. Typical Bosch:

the absolute demand for perfect performance applies in equal

measure to the Bosch Isio, the new cordless shrub and edging

shear. It helps you to shape the natural growth of your plants. This is

what you get from Bosch – quality tools for convenient gardening,

whether small or large.

Cordless freedom and more time for creativity. Bosch Cordless Garden Tools turn your garden into a pleasure ground.

Bosch Isio – It’s all a matter of shape.

The new Isio cordless edging and shrub shear. For individually designing small box shrubs on the balcony or patio. Thanks to the SDS system, the laser-cut quality blades can be changed at the push of a button – for accurately cutting the edges of your lawn.

Further information on Page 10.

7

The garden tools from Bosch – Giving gardeners a cutting edge.

A beautiful lawn. Resilient like a football pitch,

neat like a playing field. No problem. Take the

Bosch Rotak Mower. Whether with or without a

cable, it provides enormous power previously

only available from petrol-driven lawnmowers.

This is noticeable when mowing damp, heavy or

especially long grass: the Bosch Powerdrive™

Motor automatically increases the power as soon

as the cutter is slowed down. In this way, the

motor always works extremely powerfully through

the most difficult situations. And its Rotak grass

combs also cut the edges. Another trendsetting

innovation is the new grass trimmer with lithium-

ion technology. Find out more about this in the

product field below.

Better cutting made easy.

The same applies to hedges. You have to cut

them. A Bosch Cordless Hedgecutter makes light

work of this. It is not dependent on plug sockets,

it is durable due to lithium-ion technology and it

is up to 30 percent lighter – this gives you a

clear advantage when it comes to powerful

hedgecutting. No matter how old or large your

hedge is and how hard or thick the branches

are – in the new range of hedgecutters from

Bosch you will find the appropriate solution for

any requirement.

NEW!Bosch Cordless Grass Trimmer – for perfect lawn edges.

For cordless freedom when trimming your lawn. With convenient lithium-ion technology – particularly lightweight and powerful. Powerful cutting. Fast charging. Always ready for use. Maximum flexibility due to continuously adjustable telescopic handle for trimming under bushes, 90° rotating cutter head for edging.

The complete Bosch Grass Trimmer range can be found at a glance on Pages 12.


The world’s lightest cordless hedgecutter.

Winner of weight comparison: up to 30% lighter than comparable tools due to lithium-ion batteries. Patented Power-Tech system for powerful cutting when other hedgecutters stall. Laser-cut, diamond ground blades and 15 mm tooth spacing, enabling you to cut even medium-thick branches perfectly. Put simply: more power at less weight.

The complete Bosch Hedgecutter range can be found at a glance on Pages 13.

The tool’s perfectly balanced centre of gravity together with the especially smooth running of the low-wear conrod drive ensure that Bosch Hedgecutters offer very convenient handling. For this reason, any hedge can be effortlessly and efficiently worked on, even in critical areas.

Built-in safety Work can only be performed when both hands are in contact with the handle. Convenient and safe without a cable. Handy, easy hedgecutting in any position due to perfect handle ergonomics.

Power-Tech The patented Power-Tech system enables the tool to carry on cutting powerfully when other hedgecutters stall.

NEW!

9

Bosch innovation World’s first battery integrated lithium-ion secateurs replacing the straining manual cutting action.

Strong performancePatented ‘Power-Blade’ System for effortless pruning with a cutting diameter of up to 14 mm.

Bosch Lithium-Ion TechnologyNo self-discharge, no memory effect and always ready to use. Delivers on average 500 cuts of 9 mm soft wood (fresh wood) with one battery charge.

Bosch Lithium-Ion Technology No self-discharge, no memory effect and always ready to use. Delivers an incredible run time of up to 50 mins.

• Charge level indicator• Safety lock prevents unintentional

activation• Innovative trigger system• Easy charging, thanks to the mobile

phone-type charger

• Practical charge indicator• Easy blade changing thanks

to Bosch SDS• Laser-cut quality blades

for a precise cut• Comfortable softgrip

SpecificationsISIO Cordless

Shrub ShearISIO Cordless

Shear Set

Battery type Lithium-ion Lithium-ion

Battery power 3.6 V 3.6 V

Blade length 110 mm 80 mm

Tooth spacing 8 mm –

Weight 0.6 kg 0.5 kg

Charge time 5 h 5 h

Running time 40 min 40 min

Part no. 0 600 833 041 0 600 833 043

Accessories:

Grass shear blade 2 609 002 039 2 609 002 039

Shrub shear blade 2 609 002 040 2 609 002 040

Lubricant spray 250 ml 1 609 200 399 1 609 200 399

Specifications CISO

Battery type Lithium-ion

Battery voltage max. 14 mm diameter

Cutting capacity 18 V

Cuts per battery charge 5001

Cutting system Bypass

Power-Blade System ✓

Charge time 5 hours

Weight 0.6 kg

Part no. 0 600 855 041

Accessories:

Spare blade F 016 800 286

Pruning made easy with the world’s first secateurs with an integrated lithium-ion battery. It delivers on average more than 500 cuts with one battery charge. With just one move of your finger, it cuts through branches or twigs up to a diameter of 14 millimetres smoothly and cleanly.

The ISIO is handy, very lightweight and always ready for use due to the lithium-ion technology. As a cordless shrub shear, it is perfect for shaping shrubs and small hedges. As a cordless edging shear, it is perfect for accurately cutting the edges of your lawn.

The Technology

The Technology

Features:

Features:

Secateurs

Shrub Shears

NEW

NEW

NEW


Sec

ateu

rs /

S

hrb

She

ars

Innovative Grass CombsWider than the front wheels of the lawn mower, the innovative grass combs enable cutting of grass growing close to the edge due to their special design. This ensures that no strips of uncut grass are left behind, even when cutting along flower beds, walls or paths.

Rotak 37 LI

‘Efficient Energy Management’This increases the run time of the lithium-ion batteries in the Rotak LI by 10 to 20%. The intelligent cutting electronics deliver exactly the required amount of energy to suit the length and density of the grass, and keep the blade rotation speed constant. And when the motor is switched off, the energy recovery system converts the energy generated by the blade run-down motion into electrical energy, which is fed back into the mower’s battery.

Lithium-ion technologyThanks to its lithium-ion technology, your mower is still charged even if you have

not used it for some time. What’s more, you can charge it after every application without having to worry about it – regardless of whether the battery is fully charged, half charged or almost flat.

Rotak 34 and Rotak 43

Powerdrive™ MotorThe innovative reduction gear unit converts the high speed of the motor

into enormous power. If it is slowed down by resistance, the torque automatically increases and the motor continues to work powerfully, even under difficult conditions and high load.

Mowers

The corded rotary mowers from Bosch powerfully mow even long grass with their Powerdrive™ motor and cut right up to the edges thanks to the innovative grass combs. With no need for plug sockets, the new Rotak cordless mower offers power, freedom of movement, energy efficiency and all of the advantages of the innovative Bosch lithium-ion technology.

The Technology

Specifications Rotak 37 LI

Power source | Battery voltage 36 V/2.6 Ah lithium-ion battery

Charge time | Quick charge time 1 h | 80% of the power in 30 mins

‘Efficient Energy Management’ ✓

Recommended lawn area 150–300 m2

Width-of-cut 37 cm

Cutting system Rotary blade

Grass combs ✓

Grass box capacity 40 litres

Height-of-cut 20–70 mm

Height-of-cut settings 10, central

Type of switch Full width on/off switch

Integrated carrying handle ✓

Charge level indicator ✓

Weight 13.9 kg

Part no. 0 600 881 J40

Accessories:

Replacement blade F 016 800 277

36 V Li-ion battery 2 607 336 040

Li-ion quick charger 2 607 225 274

Specifications Rotak 34 Rotak 43

Motor power 1300 W 1700 W

Torque 20 Nm 23 Nm

Width-of-cut 34 cm 43 cm

Bosch Powerdrive™ Motor ✓ ✓

Cutting system Rotary blade Rotary blade

Grass combs ✓ ✓

Grass box capacity 40 litres 50 litres

Height-of-cut 20–70 mm 20–70 mm

Height-of-cut settings 10, central 10, central

Type of switch Standard Full width on/off switch

Integrated carrying handle ✓ ✓

Motor overload cut-out ✓ ✓


Part no. 0 600 881 A40 0 600 881 D40

Accessories:

Replacement blade F 016 800 271 F 016 800 274

Available Q2 2010

Available Q2 2010

NEW

NEW NEW

11

Mow

er

AdjustableHeight-adjustable telescopic handle, 90° rotating cutter head for fast edging and effortless trimming.

ART 26 LI

Lithium-ion technologyThanks to its lithium-ion technology, your trimmer is still charged even if you have

not used it for some time. What’s more, you can charge it after every application without having to worry about it – regardless of whether the battery is fully charged, half charged or almost flat.

Convenient and powerfulThe ART 26 LI edges up to 1000 metres with one battery charge. A short charge time of just 3 hours makes this 2.4 kg lightweight tool always ready to use.

Quick change blade systemInnovative plastic blade system for energy-efficient and accurate cutting.

ART 23 and 30 Combitrim

VersatileThe new combitrim range comes with two spools, one for normal grass and one with extra-strong line for more stubborn growth.

Grass Trimmers

• Auxiliary handle• Telescopic handle • Plant protector• Light weight

Bosch corded grass trimmers provide high power and cutting diameters of up to 30 centimetres. They give good results in little time. The Bosch cordless Li-ion grass trimmer offers the greatest freedom of movement is not dependent on a plug and is low in weight.

The Technology

Features:

Available Q2 2010

Available Q2 2010

Specifications ART 26 LI

Power source Lithium-ion

Battery voltage 18 V

Charge time 3 h

Cutting diameter 26 cm

Telescopic handle ✓

Height adjustment 80–114 cm

Cutting system Plastic blade

90° rotating cutter head ✓

Set of wheels –

Plant protector ✓

Weight 2.4 kg

Part no. 0 600 878 L40

Accessories:

Spare blades F 016 800 183

18 V Li-ion battery 2 607 336 040


Specifications ART 23 Combitrim ART 30 Combitrim


Cutting diameter 23 cm 30 cm

Telescopic handle ✓ ✓

Height adjustment 80–115 cm 80–115 cm

Cutting systemExtra-strong line + ‘Pro-Tap’ spool

Extra-strong line + ‘Pro-Tap’ spool

‘Pro-Tap’ spool 1.6 mm x 4 m 1.6 mm x 4 m

Extra-strong line (6 pieces) 6 x dia. 2.4 mm 6 x dia. 2.4 mm

90° rotating cutter head ✓ ✓

Set of wheels – ✓

Plant protector – ✓


Part no. 0 600 878 B40 12.3 kg

Accessories:

Pro-Tap line F 016 800 176 F 016 800 176

Pro-Tap spool F 016 800 175 F 016 800 175

Extra-strong line 23 cm (10pk) F 016 800 174 F 016 800 174

Extra-strong line 30 cm (10pk) F 016 800 182 F 016 800 182

NEWNEW NEW


Gra

ss

Trim

mer

s

Blade tip protectorFor easy cutting along the edges of walls and the ground.

AHS 48 LI

Electronic ‘Anti-Blocking’ System If a thick branch cannot be cut through immediately, the innovative micro-electronics detect this and instantly

adjust the running direction of the blades to continue cutting powerfully through wood where other tools would stall.

Lithium-ion technologyThanks to its lithium-ion technology, your hedgecutter is still charged even if you have not used it for some

time. What’s more, you can charge it after every application without having to worry about it – regardless of whether the battery is fully charged, half charged or almost flat.

AHS 650-24 ST and AHS 52-16

Advanced handle ergonomicsOptimum centre of gravity and 4 switch positions for relaxed and balanced work.

• Laser cut, diamond ground blades• Light weight• Blade tip protector

Bosch corded electric hedgecutters offer more power and a tooth spacing of up to 24 mm. The Bosch cordless Li-ion hedgecutter offers more freedom of movement and removes the risk of cutting through a cable. It is very lightweight and its innovative ‘Anti-Blocking’ System prevents virtually any chance of stalling.

The Technology

Features:

Hedgecutters

Available Q2 2010

Available Q2 2010

Specifications AHS 48 LI

Power source Lithium-ion

Battery voltage 18 V

Charge time 3 h

Run time Up to 50 min

‘Anti-Blocking’ System ✓

Tooth opening 15 mm

Blade length 480 mm

No-load stroke rate 2200 spm

Weight 2.2 kg

Part no. 0 600 849 0 40

Accessories:

18V/ 1.3 Ah Li-ion battery 2 607 336 040


Lubricant spray 250 ml 1 609 200 399

Specifications AHS 650-24 ST AHS 52-16


Tooth opening 24 mm 16 mm

Blade length 650 mm 520 mm

Slipping clutch torque 50 Nm –

No-load stroke rate 2800 spm 3200 spm

Blade tip protector ✓ –


Part no. 0 600 848 440 0 600 847 403

Accessories:

Lubricant spray 250 ml 1 609 200 399 1 609 200 399

NEW

NEW NEW

13

Hed

gecutters

Metal pumpThe high quality Bosch metal pump with stainless steel and brass components

ensures long life.

Mobile*Equipped with two robust wheels for easy manoeuvrability.

Storage facilities*Cable and hose storage features are incorporated.

Aquatak Click 125

Bosch innovationNo tedious untangling, no more buckling and knotting thanks to the

new ‘Torsion-Flex’ highpressure hose.

* Excludes Aquatak 10 and 100

High Pressure Washers

Bosch offers you a wide range of high-pressure washers, each with a variety of different features. They also differ from each other in terms of motor power and maximum water pressure from 100 to 125 bar. When choosing a high-pressure washer, you should base your decision on the type of cleaning work you intend to do, i.e. whether it is heavy or light, frequent or occasional.

The Technology

Specifications Aquatak 10 Aquatak 100 Aquatak 110 PLUS Aquatak 115 Plus Aquatak Clic 125

Max. pressure 100 bar 100 bar 110 bar 115 bar 125 bar

Motor power 1300 W 1400 W 1600 W 1700 W 1800 W

Max. flow rate 300 L/h 330 L/h 380 L/h 380 L/h 410 L/h

Max. flow temperature 40 ºC 40 ºC 40 ºC 40 ºC 60 ºC

Self-priming function – – – – ✓ ✓

Weight 6 kg 6 kg 7.2 kg 7.2 kg 13 kg

Part Number 0 600 876 G40 0 600 876 A40 0 600 876 D40 0 600 876 E40 0 600 879 040

Comes complete with: Fan lance Jet Fan lance Vario Jet Fan lance Vario Jet Fan lance 4 Jet lance

– – Roto Power lance Roto Power lance –

– Flexi Jet lance Flexi Jet lance Flexi Jet lance –

– – Wash brush Wash brush –

3.5 m hose 3.5 m hose 5 m hose 6 m hose 6 m hose

Integrated 0.5 L detergent tank




Integrated 1 L detergent tank


Hig

h P

ress

ure

Was

hers

Choose the right accessories for your Bosch high-pressure washer

All-purpose cleaner F016800232

Car cleaner F016800236

Polishing wax 0.5 L - F0168002332.5 L - F016800234

Alloy wheel cleaner F016800229

Patio cleaner F016800237

Glass cleaner F016800235

Insect cleaner for cars F016800230

Universal adapter setF016800108

Get the best results whenever and whatever you’re cleaning with the full range of specially formulated Bosch detergents.

Wash brush F016800209

Adjustable rotary brush F016800211

Extension lance F016800206

Bosch Aquasurf cleaner* F016800169 *Not recommended for Aquatak Go

Flexi-jet lance F016800171

Water filter F016800221

Back-flow valve F016800222

Detergent bottle* F016800208 * Except for Aquatak 1250, 115 PLUS, 110 PLUS

Hose extension* F016800212 *Not recommended for Aquatak Go

15

Paintbrushes and drips were yesterday. Today we spray. The new fine spray systems from Bosch.

SprayControl TechnologyHigh air volume, low pressure. The result: brilliant paint application due to the highest level of fine paint atomisation.

Setting the 3-stage paint nozzle A wide paint jet in horizontal or vertical direction or a pencil jet – the paint nozzle can be precisely adjusted for accurate spraying.

Tank replacement thanks to SDS quick coupling Bosch SDS enables you to change the tank in no time – for fast paint changes and easy cleaning.

Do you want to quickly freshen up wood, plastic and metal? No problem. The portable Spray System PFS 65 offers precise and constant spraying quality with the highest possible flexibility. With the tool over your shoulder and the lightweight gun securely in your hand, you can work quickly and easily, even overhead.


Portable and flexible. Fast and durable. Precise with little spray mist

All of these advantages are thanks to the innovative SprayControl Technology. For brilliant, fine and controlled paint application. Three times faster than with a paintbrush or roller. With no blots, drips or spatters. It is also low in noise and vibration. This is the modern way of spraying effortlessly. With nothing but enthusiasm.


No more blotches! Now there is the new generation of Bosch Fine

Spray Systems with innovative SprayControl Technology, which enables

effortless spraying of spotless paint surfaces. At last, a spray system

that prevents spattering and limits the spray mist. One system in

three models. For projects of all sizes.

Evenly painted doors, tables, benches, carports, boats – the new fine spray

systems from Bosch always produce such perfect results that you will really

look forward to your painting work. Thanks to the innovative SprayControl

Technology, you can work at high volume and low pressure more precisely

than ever before. With no spatters and no tears. And the high level of accuracy

means less masking is required. So you are guaranteed to work faster. Also

with all different kinds of materials: weatherproof varnishes, scratchproof

synthetic paints, extremely smooth polishes, waterproof undercoat, heat-

resistant engine paint (and even with detergents and insect repellents).

With the new Bosch Fine Spray Systems, you can achieve flawless varnishing

and painting results with no effort.

NEW!

PFS 55 Handy fine spray system for small and medium-sized projects.

PFS 65Portable and compact fine spray system for medium-sized projects.

There is a solution for making work more pleasur-able: consistent painting without tears, bristles or lumps. Simply work with the handy Bosch Fine Spray System PFS 55 for smaller projects.

17

The high-frequency oscillation allows for precise work without kick-back.

All tool accessories can be fixed at the appropriate angle with no risk of slipping. Tool changes are made quick and easy by the single-screw principle.

Oscillation Angle function

Oscillation:

The PMF 180 E from Bosch is a true model of versatility. Do

you want to replace your old carpet with a nice new parquet?

The PMF 180 E can help!

Do you want the joints in your bathroom to shine in a brilliant new

white? The PMF 180 E is raring to go! And do you want to finally

restore the classic motorbike you have stowed away in your garage?

No problem with the PMF 180 E! The more you work with it, the more

you will come to appreciate its abilities: its handiness and power. The

manoeuvrability in tight spaces: when it saws, when it cuts, when it

sands, when it ... You are sure to come up with countless other ways

of using the PMF 180 E.

One tool for all jobs. The new all-rounder from Bosch.

15000–21000/min2.8°


Plunge-cutting saw blades wood, plastic, plasterboard in widths of 10, 20, 32 mm

Sawing biscuit joints Cutting hinges to length

BiM segment saw blade

Shortening door frames

Versatile when working in tight spaces.

The depressed centre of the bi-metal segment saw blade brings you closer to your cutting target: it enables you to get into border areas that conventional machines only reach with extreme difficulty or do not reach at all.

Versatile when working in tight corners and close to edges.

Cutouts in worktops Trimming plasterboard Cutting pipes

Plunge-cutting saw blades for metal (aluminium, copper, metal plate) in widths of 10, 20 mm

Sawing

Whether short or long cuts, whether in the middle or at the very

edge: the PMF 180 E and the BiM segment saw blade with depressed

centre enable you to work everywhere quickly and easily. Your

parquet will be flush in no time, protruding wooden parts will be

removed in a flash and the new drainpipe will be cut to the right

length very quickly. And you will be able to do this without great

effort but with the highest precision.

The PMF 180 E works precisely right into the furthest angle because

its shape helps you in tight spaces – even in areas close to floors and

walls. Therefore, the PMF 180 E gives you a clear advantage in

comparison to conventional power tools. Cutouts in door frames

when laying parquet and laminate are done with ease. Do you want to

work on fitted worktops? No problem, either! And not even metal can

stop the PMF 180 E. The metal saw blades enable you to cut nails

and pipes to the required length in no time.

Sawing

19

The PMF 180 E: a multi-talented tool with many qualities

Whether sawing, cutting, routing or sanding – the PMF 180 E from Bosch is a truly multi-talented tool. Its powerful 180-watt motor with 15,000–21,000 oscillations per minute ensures precise and fast results. Pleasant, convenient working due to low vibration, continuously variable electronics and weight of only 1.2 kg.


Versatile when performing hard applications.

The PMF 180 E also makes light work of the hardest materials.

Simply clamp in the TC Riff segment saw blade and the PMF 180 E is

ready to start: for making an additional cable duct in the wall, for

cutting your new wall tiles or for removing the old joint material.

Thanks to its power, the PMF 180 E ensures a safe and precise cut.

Cutting, routing

Make work in hard subsurfaces easier for yourself: the tungsten-carbide Riff segment saw blade effortlessly removes old putty joints and can even work in wall tiles.

Cutting tilesRemoving joint materialCutting cable ducts

TC Riff segment saw blade for working on hard materials

NEW!


The PMF 180 E ensures perfect surfaces. In your house, around your

house or, for example, when working on the body of your car or

motorbike. Its sanding attachment turns it into a powerful and

reliable delta sander. And because the PMF 180 E is extremely

lightweight and handy, you can achieve impressive results without

having to apply a lot of feed pressure. What’s more, you also create

little dust because the PMF 180 E has a port for connecting a

vacuum cleaner.

White Paint helps you when working on paint and varnish.

Red Wood is the specialist for all work with wood.

Black Stone is ideal for working on hard and brittle surfaces.

Apply the perfect finish with the polishing fleece without grit and with the polishing felt.

Bosch quality accessories

Versatile when the perfect finish is required.

Sanding

The sanding attachmentFitted and equipped in no time: the sanding sheets are really easy to replace thanks to the micro Velcro-type fastening system.

Versatile for your ideas.The PMF 180 E not only opens the way to new ideas, it also enables

you to put them into practice. Whether wood, plastic, metal, stone or

whatever you want to sand: make it easy for yourself and choose

from the countless sanding sheets in the Bosch range of accessories.

Not only do they suit the respective material, they also fit the PMF

180 E. The same applies to the cleaning and polishing fleeces that

you can use to put the finishing touches to a surface when you have

finished working on it.

Smoothing plasterboard Sanding fillerEvening out surfaces

Dust extraction guard

21

Specifications PSR 12-2 PSR 14.4-2 PSR 1800

Screw diameter up to 7 mm 8 mm 8 mm

Drilling diameter in steel 12 mm 12 mm 10 mm

Drilling diameter in wood 23 mm 26 mm 28 mm

No-load speed (1st gear/2nd gear) 0–400 rpm/0–1,200 rpm 0–400 rpm/0–1,400 rpm 0–700 rpm

Max. torque (drill setting) 27 Nm 30 Nm 30 Nm

Battery voltage 12 V 14.4 V 18 V

Machine weight with battery 1.6 kg 1.7 kg 1.7 kg

Part number 0 603 916 J40 0 603 916 G40 0 603 955 342

Cordless 1-Speed Drill/Drivers

Two-sleeve ‘Click’ keyless chuckThe ‘Click’ keyless chuck for easy changing of screwdriver bits and drill bits emits an acoustic signal as soon as the screwdriver bit or the drill bit is clamped in tight.

Integrated work light (PSR 1800)Thanks to the built-in LED, your workpiece is always

well lit and clearly visible.

Bosch ElectronicFor speed control using the trigger switch – ‘acceleration’ from 0–max. For smooth pilot drilling followed by rapid drilling at full speed.

Quick-change battery packRechargeable NiCd battery. It is small, works in any location, is very sturdy and maintenance-free. It provides a high power output level and is capable of a large a large number of charging and discharging cycles.

Setting ring with torque preselection, plus drill settingOn all Bosch Cordless Drill/Drivers you can select the ‘screwdriving’/‘drilling’ modes by turning a setting ring. There are 25+1 torque settings (5+1 PSR 1800) available for screwdriving. When the machine reaches the set value, it automatically stops the screwdriving process.

Run-out brakeStops the motor in the shortest possible time – no after-run. Ideal for series screwdriving, as you can work without interruption.

SoftgripSmooth and safe handling because vibrations are reduced to a minimum.

Collective features of PSR 12-2, PSR 14.4 and PSR 1800:• Setting ring with torque preselection

plus drill setting• Easy handling thanks to two-sleeve • ‘Click’ keyless chuck• Run-out brake• Electronic forward/reverse indicator• Powerful motor and planetary gears• Softgrip• Screwdriver bit storage on housing• Bosch Electronic• Quick-change battery pack

with voltage coding

The cordless drill/drivers from Bosch are compact, lightweight and powerful universal tools for cordless drilling and screwdriving. The battery technology and the high level of ergonomics enable optimum work in any situation.

The Technology

Features:


Cor

dle

ss

Dri

ll /

Dri

vers

/

Scr

ewd

rive

rs

Charging technologyThis series is equipped with a 20 minute turbo charger that automatically detects the charge status of the battery and reduces the current supply when the full charge status is reached. This intelligent ‘battery full’ detection reduces both wear on the batteries and power consumption.

‘Click’ keyless chuck with Bosch Auto-LockThe keyless chuck for easy changing of screwdriver bits and drill bits emits an acoustic signal as soon as the screwdriver bit or the drill bit is clamped in tight. The integrated Bosch Auto-Lock ensures that the machine locks the drill spindle at standstill, making it easy and convenient to open the keyless chuck.

High-performance planetary gears2-speed gears with superior lifetime, best power transfer (high efficiency), high degree of running smoothness with the smallest possible dimensions. High torque in 1st gear (e.g. large screw diameters) and high speed in 2nd gear.

Run-out brakeStops the motor in the shortest possible time – no after-run. Ideal for series screwdriving, as you can work without interruption.

Integrated work lightThanks to the built-in LED, your workpiece is always well lit and clearly visible.

Bosch ElectronicFor speed control using the trigger switch – ‘acceleration’ from 0–max. For smooth pilot drilling followed by rapid drilling at full speed.

Quick-change battery packRechargeable NiCd battery. The battery is small, works in any location, is very sturdy and requires no maintenance. It provides a high power output level and is capable of a large number of charging and discharging cycles.

Setting ring with torque preselection, plus drill settingThe torque on all Bosch Cordless Drill/Drivers can easily be set using a setting ring. There are 25 torque settings available for screwdriving. When the setting is correct, the machine is automatically stopped as soon as the screw has been driven flush into the material.

Cordless 2-Speed Drill/Drivers

• 2-speed high-performance planetary gears

• Setting ring with 25-stage torque preselection plus drill setting

• ‘Click’ keyless chuck with Bosch Auto-Lock for the easiest tool changes

• Bright light even in dark corners thanks to the integrated ‘PowerLight’

• Quick charger with intelligent ’battery full’ detection

• Run-out brake• Lock-on switch• Softgrip• Bosch Electronic• Quick-change battery pack with voltage

coding and increased capacity (1.5 Ah)• Screwdriver bit storage on housing• Electronic forward/reverse indicator

The cordless drill/drivers from Bosch are compact, lightweight and powerful tools for cordless drilling and screwdriving. The battery technology and a high level of ergonomics enable optimum work in any situation.

The Technology

Features:

Specifications PSR 14.4 VE PSR 18 VE

Screw diameter up to 8 mm 10 mm

Drilling diameter in steel 10 mm 12 mm

Drilling diameter in wood 35 mm 40 mm

No-load speed (1st gear / 2nd gear) 0–400 / 1,250 rpm 0–400/1250 rpm

Torque settings 25 + 1 25 + 1

Max. torque in soft/hard screwdriving applications 22 / 36 Nm 28/44 Nm

Battery voltage 14.4 V 18 V

Machine weight with battery 1.75 kg 2.0 kg

Part number 0 603 951 G41 0 603 951 E41

Comes complete with:

20 min quick charger 3 3

2 battery pack 3 3

Plastic carrying case 3 3

23

Cord

less D

rill / Drivers /

Screw

drivers

Lithium-ion technologyThanks to its lithium-ion technology, your

cordless drill/driver is still charged even if you have not used it for some time. What’s more, you can place it onto the charging station after every application without having to worry about it – regardless of whether the battery is fully charged, half charged or almost flat. Lithium-ion technology also allows for a particularly lightweight and compact design.

Lithium-ion Cordless 1-Speed Drill/Drivers

Integrated work light Thanks to the built-in LED, your workpiece is always well lit and clearly visible.

Forward/reverse indicatorGreen LED forwards: drive Green LED backwards: unscrew

Bosch Electronic Cell Protection (ECP)The Bosch Electronic Cell Protection (ECP) ensures

that the lithium-ion batteries have a particularly long life.

Charge level indicatorThe intelligent battery charge level indicator shows you in three stages how full the battery is.

SoftgripConvenient handling thanks to ergonomic shape and integrated softgrip.

Quick-change battery pack (only PSR 14.4 LI)Rechargeable lithium-ion battery pack with increased lifetime thanks to Bosch Electronic Cell Protection (ECP). Smaller, lighter and always ready for use thanks to lithium-ion technology.

Setting ring with pre-selectable torque settings, plus drill setting‘Screwdriving’/’drilling’ modes can be selected by turning a setting ring. There are 10 torque settings available for screwdriving. When the machine reaches the set value, it automatically stops the screwdriving process.

‘Click’ keyless chuck with Bosch Auto-LockThe ‘Click’ keyless chuck for the easiest changing of screwdriver bits and drill bits, by hand and without the need for additional tools, emits an acoustic signal as soon as the screwdriver bit or the drill bit is clamped in tight. The integrated Bosch Auto-Lock ensures that the machine locks the drill spindle at standstill, making it easy and convenient to open the keyless chuck.

NEWNEW

• Most handy tools in their class due to particularly lightweight and compact design

• No memory effect, no self-discharge: always ready for use thanks to lithium-ion technology

• Intelligent 3-stage battery charge level indicator

• Increased lifetime thanks to Bosch Electronic Cell Protection (ECP)

• Setting ring with 10 pre-selectable torque settings, plus drill setting

• ‘Click’ keyless chuck with Bosch Auto-Lock for the easiest bit changes


• 3-hour lithium-ion charging station with intelligent ‘battery full’ detection

• Run-out brake stops the tool immediately when required

• Lock-off switch• Softgrip for convenient working• Bosch Electronic for easy speed control• Electronic forward/reverse indicator• 14.4 V lithium-ion quick-change

battery pack with voltage coding (only PSR 14.4 LI)

The cordless 1-speed drill/drivers with lithium-ion technology are handy, powerful tools thanks to the efficient battery technology from Bosch.

The Technology

Features:

Specifications PSR 10.8 LI PSR 14.4 LI




No-load speed 0 – 410 rpm 0 – 450 rpm


Max. torque in soft/hard screwdriving applications 10/25 Nm 12/28 Nm

Battery voltage 10.8 V 14.4 V


Part number 0 603 954 040 0 603 954 140


Cor

dle

ss

Dri

ll /

Dri

vers

/

Scr

ewd

rive

rs

Specifications PSR 14.4 LI-2 PSR 18 LI-2




No-load speed (1st gear/2nd gear) 0–370 / 1,150 rpm 0–400 / 1,250 rpm


Max. torque in soft/hard screwdriving applications 17 / 30 Nm 22 / 36 Nm



Part number 0 603 956 T42 0 603 956 S42


Lithium-ion charging station 3 3

Battery pack(s) 3 3


Lithium-ion Cordless 2-Speed Drill/Drivers

Lithium-ion technologyThanks to its lithium-ion technology, your cordless drill/driver

is still charged even if you have not used it for some time. What’s more, you can place it onto the charging station after every application without having to worry about it – regardless of whether the battery is fully charged, half charged or almost flat. 25% less in size and weight than standard Nicad drill/drivers.






CapacityDrive over 250 screws nonstop with one full battery charge – thanks to the particularly high-

endurance lithium-ion battery packs.

Quick-change battery packRechargeable lithium-ion battery pack with increased lifetime thanks to Bosch Electronic Cell Protection (ECP). Smaller, lighter and always ready for use thanks to lithium-ion technology.

Setting ring with torque preselection, plus drill settingOn all Bosch Cordless 2-Speed Drill /Drivers you can select the ‚screwdriving‘/‘drilling‘ modes by turning a setting ring. There are 25 torque settings available for screwdriving. When the machine reaches the set value, it automatically stops the screwdriving process.

Keyless chuckNo keys or other tools are required to insert or remove accessories.

Bosch Auto-LockThe Auto-Lock system ensures the quickest and easiest changing of accessories. The drill spindle automatically locks the drill once it comes to a standstill and the keyless chuck can be easily and conveniently opened.

• Most handy tool in its class due to particularly lightweight and compact design





• Setting ring with 25-stage torque preselection plus drill setting

• Keyless chuck with Bosch Auto-Lock for the easiest tool changes

• Bright light even in dark corners thanks to the integrated ‘PowerLight‘


• Run-out brake• Lock-on switch• Softgrip• Bosch Electronic• New lithium-ion quick-change battery

pack with voltage coding• Electronic forward/reverse indicator

The cordless drill/drivers deliver even better performance thanks to the latest lithium-ion battery technology: high torques and optimum ergonomics ensure high-endurance, powerful drilling and screwdriving.

The Technology

Features:

25

Cord

less D

rill / Drivers /

Screw

drivers

Specifications IXO 3

Screw diameter up to 5 mm

No-load speed 180 rpm

Max. torque 3 Nm

Battery voltage 3.6 V

Drill chuck Magnetic bit holder with hexagonal shank

Machine weight 0.3 kg

Part number 0 603 959 140

IXO

Lithium-ion technologyThanks to its lithium-ion technology, the IXO is still charged even if it

has not been used for months at a time. What’s more, you can place it onto the charging station after every application without having to worry about it – regardless of whether the battery is fully charged, half charged or almost flat. The lithium-ion technology makes it possible to equip the IXO with an extremely small battery. The result – the IXO is lighter and handier than any other cordless screwdriver.


Forward/reverse indicatorGreen LED forwards: driveGreen LED backwards: unscrew

Charge level indicatorAn LED enables you to check the battery power quickly and easily.

SoftgripConvenient handling thanks to ergonomic shape and integrated softgrip.

Optional accessories:

Angle screw adapter For hard-to-reach areas

Torque setting adapterFor optimum power metering when driving small screws


• Spindle lock• PowerLight• Softgrip• Forward/reverse operation• Forward/reverse indicator and charge

level indicator via LED• Battery charger also ideal for storing

the tool

Lightweight, compact – and nevertheless powerful: the IXO from Bosch for universal screwdriving applications. This tool sits perfectly in your hand thanks to its ergonomic design with softgrip, and the latest battery technology ensures extra-long runtimes.

The Technology

Features:


Cor

dle

ss

Dri

ll /

Dri

vers

/

Scr

ewd

rive

rs

Specifications PDR 14.4


No-load speed 0–2,600 rpm

Impact rate 0–3,000 rpm

Max. torque 130 Nm

Battery capacity 1.5 Ah

Weight 1.7 kg

Part number 0 603 917 G40

Impact Driver

Powerful high-performance motorSmall but powerful tools for tough jobs: with a torque of up to 130 Nm, the Bosch Cordless Impact Drivers are truly powerful screwdrivers for driving and loosening screws, particularly in metal.


Quick-change battery packRechargeable NiCD battery. The battery is small, works in any location, is very sturdy and requires no maintenance. It provides a high power output level and is capable of a large number of charging and discharging cycles.

• High torque and high impact force • Auto-Lock• Compact and ergonomic design• Forward/Reverse• LED light • Removable belt• Externally changeable carbon brushes• Metal gear housing

The cordless impact driver from Bosch is a compact, lightweight and powerful tool for versatile use. The battery technology and the high level of ergonomics enable optimum work in any situation.

The Technology

Features:

27

Cord

less D

rill / Drivers /

Screw

drivers

Lithium-ion Cordless 2-Speed Hammer Drills


Charging technologyThe intelligent lithium-ion charging station allows for the battery to be charged both on its own and together with the tool in only one hour. It automatically detects the charge status of the battery and reduces the current supply when the full charge status is reached. This intelligent ‘battery full’ detection reduces both wear on the batteries and power consumption.



NEW NEW

CapacityDrive over 300 screws nonstop with one full battery charge – thanks to the particularly high-endurance lithium-ion battery packs.

Quick-change battery packRechargeable lithium-ion battery pack with increased lifetime thanks to Bosch Electronic Cell Protection (ECP). Smaller, lighter and always ready for use thanks to lithium-ion technology.

Setting ring with pre-selectable torque settings, plus drill setting, plus hammer drill settingOn all Bosch cordless 2-speed hammer drills you can select the ‘screwdriving’ / ‘drilling’ / ‘hammer drilling’ modes by turning a setting ring. There are 30 torque settings available for screwdriving. When the machine reaches the set value, it automatically stops the screwdriving process.

Keyless chuck with Bosch Auto-LockNo keys or other tools are required to insert or remove accessories. Bit changes are by hand without additional tools. The Auto-Lock system ensures the quickest and easiest changing of accessories. The drill spindle automatically locks the drill once it comes to a standstill and the keyless chuck can be easily and conveniently opened.


• Most handy tools in their class due to particularly lightweight and compact design





• Setting ring with 30 pre-selectable torque settings, plus drill setting, plus hammer drill setting

• Keyless chuck with Bosch Auto-Lock and for the easiest bit changes



• Run-out brake• Lock-off switch• Softgrip• Bosch Electronic• New lithium-ion quick-change

battery pack with voltage coding• Electronic forward/reverse indicator

The cordless hammer drills from Bosch are extremely high-performance multifunctional tools for cordless hammer drilling, drilling and screwdriving.

The Technology

Features:

Specifications PSB 14.4 LI-2 PSB 18 LI-2




Drilling diameter in masonry 14 mm 15 mm

Drilling diameter in concrete 10 mm 12 mm

No-load speed (1st gear / 2nd gear) 0 – 350/1,550 rpm 0 – 400/1,650 rpm

Max. torque 23/40 Nm 30/48 Nm




Part number 0 603 958 440 0 603 958 340


60-minute quick charger ✓ ✓

Auxiliary handle ✓ ✓

Plastic carrying case ✓ ✓

Lithium-ion technologyThanks to its lithium-ion technology, your

cordless drill/driver is still charged even if you have not used it for some time. What’s more, you can place it onto the charging station after every application without having to worry about it – regardless of whether the battery is fully charged, half charged or almost flat. Lithium-ion technology also allows for a particularly lightweight and compact design.


Cor

dle

ss

Dri

ll /

Dri

vers

/

Scr

ewd

rive

rs

Specifications Uneo


Max. drilling diameter in concrete 10 mm

Max. drilling diameter in steel 8 mm

Max. drilling diameter in wood 10 mm

No-load speed 0–900 rpm

Impact rate 0–4,800 bpm

Impact stop 3

Single impact energy 0.9 J

Bosch Hammer Mechanism pneumatic


Battery capacity 1.3 Ah

Bosch Electronic 3

Bosch SDS-Quick toolholder 3

Forward/reverse operation 3

Forward/reverse indicator 3

Charge level indicator 3



3-hour charger 3

Concrete drill bits (SDS-Quick) 1 x dia. 6 mm, 1 x dia. 8 mm 3

Metal drill bits (HSS) 1 x dia. 5 mm, 1 x dia. 6 mm 3

Four long screwdriver bits 1 x Ph2, 1 x Pz1, 1 x Pz2, 1 x SL 1.0 x 5.5

3

Uneo – Hammering, drilling, screwdriving

Pneumatic functionUneo – the unique three-in-one tool from Bosch – makes it possible to drive

screws, drill and hammer drill in concrete with only one tool. The innovation is a pneumatic hammer mechanism with the smallest ever dimensions! In combination with a powerful motor, it enables high utilisation of power in an extremely small space. The single impact force of 0.9 joules at 4,800 blows per minute speaks for itself.

Lithium-ion batteryThanks to the modern lithium-ion battery, work with the Uneo is not

impaired by annoying cables. With its 14.4 volts, it offers all of the advantages of modern lithium-ion technology: powerful working, no self-discharge and it is ready for use at all times. For example, 100 screws (5x50 mm) can be driven with one battery charge. Thanks to the practical battery charger, the Uneo is as easy to charge as a mobile phone. A practical display informs you about the charging state during work. If the red LED lights up, it is advisable to recharge the battery soon. Two illuminated arrows show whether forward or reverse operation is set, for example when screwdriving.

Dimensions and weightThanks to its particularly compact shape and innovative technology, the Uneo has unbelievably small dimensions and weighs only 1.1 kilograms. The tool is as small as a DIN A5 sheet of paper, therefore making it very convenient to use.

Fully equipped for immediate useAnother new feature is the drill bit holder for the concrete

drill bits: the SDS-Quick system. Drill bits with small wings on the shank can be inserted quickly and conveniently, in exactly the same way as the SDS-plus system: insert the drill bit, let it engage and off you go. But all drill bits or screwdriver bits with a hexagonal shank can also be used.

To enable you to perform the wide range of applications straight after purchase, Bosch offers the innovative Uneo in a set with four drill bits for a wide variety of materials, and four different types of long screwdriver bits. Easy screwdriving and drilling – even in concrete: Uneo from Bosch – the unique three-in-one tool!



• Pneumatic function• Immediately ready for use.

Comes complete with collection of practical accessories

• Lithium-ion battery• 3 functions in one: hammering,

drilling and screwdriving

The Uneo from Bosch. The compact 3-in-1 power tool. Hammers, drills and drives screws in any surface – even concrete. And thanks to lithium-ion technology, not only is it particularly handy, it is also always ready for use.

The Technology

Features:

29

Uneo

Specifications PSB 500 RE PSB 600 RE PSB 650 RE

Power input 500 W 600 W 650 W

Max. drilling diameter in concrete 13 mm 13 mm 16 mm

Max. drilling diameter in steel 10 mm 12 mm 12 mm

Max. drilling diameter in wood 20 mm 30 mm 30 mm

No-load speed 50–3,000 rpm 0–2,800 rpm 50–3,000 rpm

Machine weight 1.5 kg 1.7 kg 1.7 kg

Speed preselection in the switch – – 3

Bosch Press+Lock – – 3

Softgrip 3 3 3

Part number 0 603 126 040 0 603 409 240 0 603 126 240


Auxiliary handle 3 3 3

Depth stop 3 3 3

DIY accessories set – (100 pc) 3 (200 pc) 3

Plastic carrying case 3 3 3

1-Speed Impact Drills

Bosch ElectronicThe speed can be varied either by preselecting it on a setting wheel or by using the accelerator function (from 0–max.). The speed is set to suit the material being worked on and the speed control enables slow pilot drilling followed by rapid drilling at full speed.

SoftgripFor maximum convenience when drilling, a secure grip and better control of the machine.

Bosch Auto-LockThe Auto-Lock (PSB 650 RE) system is an innovative development for impact drills

for tool-free drill bit changes. The drill spindle automatically locks the drill once it comes to a stop. The user only has to turn the drill’s chuck, and can therefore change accessories more quickly and easily than with any other fixing system available.

Bosch Constant ElectronicBosch Constant Electronic keeps the speed constant under load (ideal for heavy-duty use such as sawing holes, drilling large diameters or stirring).

Bosch Press+LockBy pressing the button on the top of the drill, the user can lock the drill spindle and

can then open and close the drill chuck by turning it. This system enables you to change accessories more quickly and easily than with conventional twin-sleeve keyless chucks.

Bosch Power ControlMachines with Bosch Power Control feature speed preselection and torque preselection. Speed preselection is for drilling suited to materials; torque preselection is for uniform screwdriving of a large number of screws. The sliding switch can be used to switch between speed preselection and torque preselection. The setting wheel is used to select the required value. When torque preselection is used, the machine is switched off automatically when the set value is reached. This enables the user to insert screws to a uniform depth.• Bosch Electronic

• Forward/reverse operation• Longer lifetime of carbon brushes

due to revolving brush plate• Ergonomically shaped handle

The ergonomic, compact design of the Bosch impact drills makes them comfortable and safe to handle when impact drilling, drilling and screw driving.

The Technology

Features:


Imp

act

D

rills

Specifications PSB 700-2 RE PSB 1000-2 RCE

Power input 701 W 1010 W

Max. torque 32 Nm 60 Nm

Max. drilling diameter in concrete (1st gear / 2nd gear) 20/13 mm 20/13 mm

Max. drilling diameter in steel (1st gear / 2nd gear) 13/8 mm 16/8 mm

Max. drilling diameter in wood (1st gear / 2nd gear) 40/25 mm 40/25 mm

Max. screw diameter 8 mm 12 mm

No-load speed (1st gear / 2nd gear) 0–800 / 2,600 rpm 0–1,100 / 2,800 rpm

Impact rate 44,200 bpm 47,600 bpm

Machine weight 2.4 kg 2.4 kg

Speed preselection 3 3

Bosch Safe Stop – 3

Bosch Constant Electronic – 3

Bosch Auto-Lock – 3

2-speed gears with ‘Supertorque’ – 3

Part number 0 603 172 540 0 603 172 840


Auxiliary handle 3 3

Depth stop 3 –


2-Speed Impact Drills

2-speed gears2-speed drills are particularly versatile in operation. Low speed with high torque in 1st gear, e.g. sawing holes or drilling large diameters; high speed with adapted torque in 2nd gear for working with a small drilling diameter.

Bosch Constant ElectronicBosch Constant Electronic keeps the speed constant under load (ideal for heavy-duty use such as sawing holes, drilling large diameters or stirring).

SupertorqueThe Supertorque function offers extra power for all applications that put special demands on user and machine. This electronic third gear offers a maximum level of torque in the ‘S’ switch position for particularly hard tasks.

Keyless chuckImpact-resistant, sturdy keyless drill chuck. In conjunction with Auto-Lock, the automatic drill spindle lock, accessories can be changed quickly and conveniently with one hand.

Bosch Safe StopThe PSB 1000-2 RCA is equipped with an overload cut-off device to protect the machine. If the drill bit gets jammed during drilling, the power transfer from the motor to the drill bit is interrupted and subsequently stops. This overload protection is deactivated when Supertorque is switched on.

SoftgripFor maximum convenience when drilling, a secure grip and better control of the machine.

• 2-speed gears• Bosch Electronic• Forward/reverse operation• Bosch Auto-Lock keyless chuck • (except for PSB 700-2 RE)• Lock-on switch for continuous operation

fully integrated in the handle• Ergonomically shaped handle

The two-speed gearbox ensures a high level of versatility and power. Whether holesawing, stirring work or large drilling diameters - Bosch offers the right tool for every user.

The Technology

Features:

31

Imp

act D

rills

Specifications PBH 2000 SRE

Power input 550 W

Max. drilling diameter in concrete 20 mm

Max. drilling diameter in steel 13 mm

Max. drilling diameter in wood 30 mm

No-load speed 0–2,300 rpm

Impact rate 0–5,800 bpm

Single impact energy 1.5 J

Bosch Hammer Mechanism pneumatic


Bosch SDS quick-change chuck 3

Rotation stop 3

Vario Lock 3

Forward/reverse operation 3

Slimline design 3

Lock-on switch for continuous operation 3



Keyed chuck 3

Auxiliary handle 3

Depth stop 3

Plastic carrying case 3

Rotary Hammer

Bosch Hammer MechanismBosch Hammers work with pneumatic hammer mechanisms. They feature high impact force and create the impact energy on their own, independent of the feed pressure of the user. Rotary Hammers are therefore ideally suited to work in hard materials such as concrete or granite.

Bosch ElectronicThe speed can be varied either by preselecting it on a setting wheel or by using the accelerator function (from 0–max). The speed is set to suit the material being worked on and the speed control enables slow pilot drilling followed by rapid drilling at full speed.

Bosch SDS-plusFor rapid tool fitting. Together with the specially designed drill bits, this enables highly

efficient power transfer from the machine to the drill bit and is thus the main reason behind the outstanding drilling performance. The drill bits are also changed quickly and without tools.

Bosch SDS quick-change chuckTool-free changing of the SDS-plus shank bits (hammering) and the standard chuck (keyed) for normal straight-shank drill or screwdriver bits. (Non-impact mode for non-SDS bits)

Selection SwitchNo matter whether you are hammering, chiselling, drilling or screwdriving – the selection switch ensures that you have the right setting. Impact stop: for switching off the hammer mechanism when drilling in wood or metal and when screwdriving. Rotation stop: for switching off the rotary motion when chiselling, e.g. with flat chisel.

Vario LockEnables chisels to be fitted in 36 different positions. This means you can choose the optimum angle between the wall and the chisel – no loss of performance due to an unfavourable working position.

• Areas of application: hammering in concrete and stone, chiselling, drilling and screwdriving

• Bosch SDS-plus• Impact stop• Overload clutch

The Bosch rotary hammer – excellently suitable for powerful hammering in concrete and masonry, chiselling and drilling. The immense power of the rotary hammer from Bosch is able to overcome even the toughest resistance quickly and easily – regardless of the feed pressure.

The Technology

Features:


Rot

ary

H

amm

ers

Specifications PST 670 L PST 700 PEL PST 800 PEL


Power output 270 W 290 W 340 W

Cutting depth in wood 67 mm 70 mm 80 mm

Cutting depth in steel 3 mm 4 mm 6 mm

No-load stroke rate 3,100 spm 500–3,100 spm 500–3,100 spm


Sole plate Steel Steel Steel

Bosch SDS 3 3 3

Bosch Electronic – 3 3

4-stage pendulum action – 3 3

Air-blast facility 3 3 3

Laser beam that can be switched on/off 3 3 3

Softgrip 3 3 3

Tool box – – 3

Part number 0 603 413 140 0 603 413 540 0 603 352 140

Jigsaws

Bosch SDSThe standard Bosch SDS enables effortless and safe saw blade

changes within seconds – without additional tools. Fit the saw blade and you’re ready for action. With saw blade ejection.

Bosch ElectronicBosch Electronic enables the user to adjust the stroke rate. Either by preselecting a stroke rate range on a setting wheel or by controlling the stroke rate via the trigger switch in the handle (‚acceleration‘ from 0–max.). The stroke rate preselection enables you to adjust the stroke rate range to suit the material you are working on (only for PST 800 PEL).

4-stage pendulum actionThe saw blade can move in two different ways: a stroke action and a pendulum action.

The elliptical saw blade pendulum action distributes the pressure across the entire sawing path, enabling fast cutting and a longer lifetime of the saw blade (only PST 700 PEL and PST 800 PEL).

Bosch ‚Low Vibration‘The integrated mass balance compensates forces and torques produced by the movement of the stroke drive and ensures extremely smooth running.

Roller guideThe saw blade is guided by the support roller. This roller absorbs the force generated

by the feed pressure of the jigsaw and prevents the saw blade from going ’astray’ to either side. This is the only way in which accurate and precise cuts are possible.

Laser beamThe laser beam can be switched on/off individually, making it the

perfect sawing aid for straight and precise cuts. What’s more, the laser module can be removed to enable sawing close to edges and shuts down automatically after 10 minutes to prevent the batteries from going flat accidentally.

Tool boxEasy storage of saw blades in the integrated saw blade storage compartment (only

for PST 800 PEL)

Dust extractionFor connection to a Bosch All Purpose Vacuum Cleaner or to an ordinary

household vacuum cleaner. Dust is directly extracted at the saw blade to the extraction channel integrated in the housing and fed to the vacuum cleaner. This gives a clear view of the cutting line and an environment free of dust.

• Bosch SDS• Sole plate which can be swivelled

to both sides and moved to the back• Softgrip• Switchable air-blast function• Connection for dust extraction• Roller guide for accurate cutting• Transparent protective cover

(except for PST 670 L)

The new generation of jigsaws from Bosch enable you to saw tight curves and wavy lines more easily and precisely than ever before and without vibration. They come as standard with Bosch SDS for effortless and safe saw blade changes in seconds – without the need for additional tools.

The Technology

Features:

33

Saw

s

Specifications PFZ 500 E

Power input 500 W

Power output 320 W

Cutting depth in wood 150 mm

Cutting depth in steel 10 mm

Stroke rate 0–2,700 spm

Saw blade stroke 23 mm


Bosch Electronic 3

Bosch SDS 3

Lock-on switch 3

Softgrip 3



Saw blade for wood 3

Saw blade for wood and metal 3


All Purpose Saw

Bosch SDSSaw blades can be changed without tools by using a slide element button. This ensures

quick and convenient blade change – from a wood saw blade to a saw blade for metal. The all purpose saw is ready in next to no time for new tasks.

Bosch ElectronicBosch Electronic enables the user to adjust the stroke rate. Either by controlling it via the trigger switch in the handle (‘acceleration’ from 0–max.) as with the PFZ 500 E.

Ergonomically designed handle systemThe variable, ergonomic handle system – handle with on/off switch – ensures comfortable and safe handling. Equally suitable for right-handed or left-handed operation.

Integrated hand protectorThe hand protector integrated into the design of the PFZ 500 E ensures safe and convenient working.

SoftgripFor outstanding, safe guidance and effortless working.

• Bosch SDS• Bosch Electronic• Low-vibration running

The all-purpose saw from Bosch is a speedy all-round saw for quick cuts in wood, plastic and metal. It offers high performance with compact dimensions and good ergonomics.

The Technology

Features:


Saw

s

Specifications PKS 66

Power input 1000 W

Power output 760 W

Cutting depth range at 90° 0–66 mm

Cutting depth range at 45° 0–48 mm

Circular saw blade rated diameter 190 mm

Circular saw blade bore size 30 mm

No-load speed 4,800 rpm

Guide plate 160 × 345 mm


Protective guard Aluminium

Mitre cuts 3

Double-sided safety switch 3

Spindle lock 3

Part number 0 603 204 X40

Circular Saw

Safety switchPrevents inadvertent activation. The tool can only be switched on when

the safety switch is pressed and held in place.

Cutting depth adjustment / Angle adjustmentAccurate cutting depth adjustment and precise adjustment for bevel cuts via the quick clamping lever. Easy, accurate.

Bosch Circular Saw BladesThe OPTILINE WOOD saw blade is supplied as standard with all Bosch Circular Saws.

Alternately, two offset teeth and one flat tooth ensure fast and clean cutting results. OPTILINE WOOD saw blades are specially designed for wood cutting applications.

Spindle lockThe spindle lock allows for quick and convenient saw blade changing. Simply press the button – saw blade locked – and use the Allen key to loosen the spindle nut.

• Lock-on switch• Pendulum protective guard• Easy cutting depth adjustment• Dust extraction (adapter needed) • Auxiliary handle integrated

in the housing

The circular saw from Bosch is the ideal tool for precise rip and mitre cuts. With the highest level of convenience and safety, it offers perfect control and maximum precision in a wide range of applications.

The Technology

Features:

35

Saw

s

Specifications PHO 1

Cutting depth 0–1.5 mm

Rebating depth 0–8 mm

Power input 500 W

Power output 250 W

Planing width 82 mm

No-load speed 19,000 rpm


Lock-on switch 3

V-grooves 3



Tungsten carbide reversible planer blade

3

Allen key 3

Planer

Combined guidance and cutting depth adjustment handleFirstly, it serves as an

auxiliary handle for secure guidance of the planer. Secondly, it can be used to set the cutting depth, even during planing.

V-groovesV-grooves for easy slanting of edges.

Integrated dust extractionIt can either be directed into a dust bag (optional accessory) or a Bosch All

Purpose Vacuum Cleaner or an ordinary household vacuum cleaner. The dust extraction can be connected to either the right or left, ensuring an environment free of dust.

Specifications POF 1200 AE

Power input 1200 W

Power output 650 W

Maximum router cage stroke 55 mm

Toolholder (supplied) 6 mm, 8 mm and 1/4’

No-load speed 11,000–28,000 rpm


Spindle lock 3

Bosch SDS for template guide 3

Bosch Speed Electronic 3

Part number 0 603 26A 140


Centring pin 3

Template guide (Ø 17 mm) 3

Straight bit (dia. 8 mm) 3

Collets 3

Spanner 3

Parallel guide 3

Dust extraction adapter 3

Router

Bosch Speed ElectronicSpeed Electronic enables infinitely variable speed preselection. This can be preselected to suit the material with a setting wheel.

On/off switch on handleThe on/off switch is ergonomically integrated in the handle. For comfortable work and more safety.

Bosch SDSHigh-quality sole plate with coating. The SDS system enables easy, tool-free

insertion of the template guide.

Dust extractionFor connection to a Bosch All Purpose Vacuum Cleaner or ordinary household vacuum cleaner. Dust is directly extracted at the router bit via the extraction adapter and fed to the vacuum cleaner. This gives a clear view of the workpiece and an environment free of dust.

Spindle lockEasy router bit changing – the integrated spindle lock makes this possible. Simply lock the spindle at the push of a button, loosen the nut, replace the router bit, tighten the nut and release the lock again.

• Patented Woodrazor blade system• Lock-on switch• Combined guidance and cutting

depth adjustment handle• Electronically balanced cutter

block for quiet running• Integrated connection

for dust extraction

• Bosch Electronic• Speed adjustment via setting wheel• Spindle lock for easy router bit changing• SDS system for easy insertion

of the template guide• On/off switch on handle• Depth pre-setting with scale

and adjustment in stages• Guide columns with protective

rubber sleeves• Softgrip• Connection for dust extraction• Transparent protective guard

The Bosch planer stands for fast and precise working with a high material removal rate and large planing width. It comes as standard with a combined guidance and cutting depth adjustment handle for non-slip guidance and continuously variable adjustment.

The router from Bosch is a versatile tool: its applications range from accurate groove, edge and profile routing through to long-hole and copy routing. It enables you to work with an extremely high level of convenience and precision.

The Technology

The Technology

Features:

Features:


Pla

ners

/

Rou

ters

Surface qualityMaterial

removal rateShapes/Curves

Corners/Edges

Orbital SanderFor large and perfect surfaces right into corners

Belt SanderFor the highest material removal rate on large surfaces

Tool

Multi-SanderMulti-talented tool for medium-sized surfaces and corners

Random Orbit SanderFor effective sanding on curved surfaces

100%

100%

100%

100%

The appropriate sanding tool

Since not all sanding tasks are the same, Bosch offers the ideal tool for every sanding application. The graph below shows you the special advantages of the individual tools at a glance. This makes it easy for you to find the right tool for your requirements.

for any requirement.

37

Sand

ers

Bosch ElectronicThe Bosch Electronic enables the user to set the orbital stroke rate by using a setting

wheel to preselect an orbital stroke rate range. The orbital stroke rate preselection is used prior to sanding to set an orbital stroke rate range that is suitable for the material being worked on.

SoftgripFor effortless working and safe handling.

Specifications PSS 250 AE

Power input 250 W

Power output 125 W

Sanding plate 92 × 182 mmMicro Velcro-type system 92 × 185 mmClamping system 93 × 230 mm

Sanding surface 167 cm2

Oscillations 14,000–24,000 opm

Oscillating circuit diameter 2.0 mm


Bosch Micro-Filter System 3

Softgrip 3

Bosch Electronic 3

Sanding sheet clamping system 3

Sanding plate with micro Velcro-type fastening 3


Orbital Sander

Integrated dust extractionA built-in, powerful dust extraction system

transports the dust at high speed into the Bosch Micro-Filter System. This ensures that the dust extraction rate is high. Guarantees longer life of the sanding sheets, a clear view of the sanding area and an environment free of dust.

Easy handlingIt is easy to see how full the transparent dust box is. The tried and tested

ribbed filter system is easily cleaned and can be used repeatedly.

Sanding sheet clamping systemThe easy-to-use clamp lever makes changing sanding

sheets convenient and easy; the sanding sheets are firmly and securely seated.

Sanding plate with Velcro-type fasteningThe sanding plate is equipped with a durable micro Velcro-

type fastening system. This allows you to change sanding sheets quickly and easily: pull off the old sanding sheet and attach a new one, that’s it.

• Bosch Micro-Filter System• Integrated dust extraction• Ergonomic handle for accurate handling• Softgrip

Fast and fine sanding on even surfaces. Smooth sanding or paint removal – the Bosch orbital sander produces the best sanding results on wood and metal.

The Technology

Features:


San

der

s

Bosch ElectronicBosch Electronic enables the user to adjust the orbital stroke rate. On the Bosch

Random Orbit Sander, this is done using the orbital stroke rate preselection by means of a setting wheel. In this way, the machine can be individually adapted to the material and the task. Premature wear of the sanding sheet is prevented and the life of the sanding sheet is extended.

Velcro-type fasteningThe sanding plate is equipped with a Velcro-type fastening system. This allows you to

change sanding sheets quickly and easily: pull off the old sanding sheet and attach a new one.

Specifications PEX 400 AE PEX 270 AE


Sanding plate diameter 125 mm 125 mm

Oscillations 9,000–26,000 opm 15,000–24,000 opm

Eccentricity 2.50 mm 2.00 mm


Bosch Micro-Filter System 3 3

Bosch Electronic 3 3

All-round adjustable auxiliary handle 3

Sanding plate with Velcro-type fastening 3 3

Part number 0 603 310 637 0 603 369 768


Bosch Micro-Filter 3 3

3 sanding sheets (Red Wood) 3 3

Spanner 3 –

Rubber sanding plate 3 3

Auxiliary handle 3 –

Random Orbit Sanders



Quickly cleanedThe sturdy container and the filter can be used for very long periods – saving

you money. The quick fastening lock ensures easy handling of the dust box and therefore uncomplicated disposal of the sanding dust.

Bosch PEX principleAll Bosch Random Orbit Sanders work with the PEX principle: random orbit

movement plus rotation. The resulting eccentric rotation of the sanding plate provides an excellent material removal rate and fine, scratch-free sanding results. Ideal conditions for subsequent surface finishing. Top results are also achieved for polishing work, e.g. of varnishes, brass or Perspex.

• Bosch Micro-Filter System• Integrated dust extraction• Sanding plate with Velcro-type fastening

Regardless of whether you want to sand or polish, whether on wood, plastic, metal, roughcast or paint, whether on flat or curved surfaces, the Bosch PEX principle in the random orbit sanders from Bosch ensures the finest finish and high sanding performance.

The Technology

Features:

39

Sand

ers

Bosch ElectronicBosch Electronic enables the user to adjust the belt speed. Either by preselecting a speed

range on a setting wheel and/or by controlling the belt speed via the trigger switch in the handle (‘acceleration’ from 0–max.). The speed preselection is used prior to sanding to set a speed range that is suitable for the material being worked on. The belt speed control via the trigger switch enables controlled initial sanding in delicate materials, for example varnishes, veneers, etc.



Quickly cleanedThe sturdy container and the filter can be used for very long periods – saving

you money. The quick fastening lock ensures easy handling of the dust box and therefore uncomplicated disposal of the sanding dust.

Sanding belt tensioning systemThe sanding belt can be changed comfortably

and easily with the easy-to-operate tensioning lever.

Automatic belt systemManual belt alignment is not required as the belt is automatically held in the

correct work position during sanding.

Specifications PBS 7 AE

Power input 600 W

Power output 300 W

Belt speed 170–250 m/min

Sanding surface 76 × 130 mm

Belt dimensions 75 × 457 mm


Bosch Micro-Filter System 3

Sanding belt tensioning system 3

Automatic belt system 3

Bosch Electronic 3



Bosch Micro-Filter 3

Angle adapter –

Sanding belt (Red Wood) 3

Subframe 3

Parallel and angle guide 3

Belt Sander

• Bosch Micro-Filter System• Integrated dust extraction• Sanding belt tensioning system• Fine adjustment of guide rollers

means that the belt can be operated with fine precision

Fast sanding of large surfaces with a high material removal rate – the belt sander from Bosch for maximum sanding performance on wood, plastic or metal.

The Technology

Features:


San

der

s

Specifications PSM 80 A PSM 160 A PRIO Cordless Multi-Sander

Power input 80 W 160 W –

Battery voltage – – 7.2 V

Oscillations 20,000 opm 24,000 opm 16,000 opm

Oscillating circuit diameter 1.4 mm 1.6 mm 1.2 mm

Sanding surface 104 cm2 104 cm2 104 cm2


Bosch SDS – – –

Part number 0 603 354 040 0 603 377 041 0 603 919 740


3 sanding sheets (Red Wood) 3 3 –

4 sanding sheets (3 × Red Wood, 1 × White Paint) – 3 –

2 sanding sheets, cleaning fleece, charging station – – 3

Multi-Sanders

Micro-Filter SystemThe built-in dust extraction element draws the dust directly into the supplied

Micro-Filter box. The dust is significantly reduced and the workplace remains clean.

A firmer holdThe sanding plate is equipped with a durable micro Velcro-type fastening system. This

makes changing the sanding sheets easy and fast.

Rotatable sanding tipTrue operating comfort: because the sanding plate is divided into sections, the delta tip can be effortlessly detached and it can be turned 360° for a longer lifetime.

Lithium-ion technologyThanks to its lithium-ion technology, the Prio holds its charge even if it has not

been used for months at a time. What’s more, you can place it onto the charging station after every application without having to worry about it – regardless of whether the battery is fully charged, half charged or almost flat.

PSM Models• Bosch Micro-Filter System• Integrated dust extraction• Dust box is transparent, which

makes it easy to see how full it is. It is also convenient to empty by opening the black cover

• Large, iron-shaped sanding plate divided into sections with particularly durable and strong micro Velcro-type fastening system

PRIO• Cordless multi-sander

with lithium-ion technology• No self-discharge• No memory effect• Practical accessories storage

and simultaneous charging in the charging station

• Battery charge level indicator• Quick charger: the cordless

multi-sander is fully ready for use again in just 30 minutes

Large surfaces? Small corners? No problem with these handy multi-sanders. Not only do they smoothen out surfaces, they also easily remove paint and varnish.

The Technology

Features:

41

Sand

ers

Specifications PWS 1000 PWS 1500 PWS 2000


Grinding disc diameter 100 mm 115 mm 125 mm

No-load speed 11,000 rpm 11,000 rpm 11,000 rpm


Part number 0 603 411 040 0 603 411 140 0 603 411 341

Angle Grinders

Protective guardAll Bosch Angle Grinders are fitted with a protective guard that can be adjusted without

tools to protect against flying sparks and other particles. Depending on the model, the guard can be adjusted up to 270°.

Protective guard codingCoding of the protective guard prevents incorrect fitting. The axial safety device ensures secure seating and more safety.

Spindle lockPressing the spindle lock fixes the spindle in place. Discs are changed easily using a spanner or without tools with the Bosch SDS quick-locking nut.

• Spindle lock • Protective guard adjustable

up to 270° without tools• Coding of the protective guard

prevents incorrect fitting • Easy-to-use on/off switch

Cutting, grinding, roughing or rust removal: the compact, handy angle grinders from Bosch offer plenty of power and a high level of safety and convenience.

The Technology

Features:

NEW


Ang

le

Gri

nder

s

Specifications PMF 180 E

Power input 180 W

Power output 74 W

Oscillation angle on left/right 1.4°

No-load speed 15,000–21,000 rpm

Weight 1.2 kg

Bosch Electronic 3



Delta sanding plate 93 mm 3

Bi-metal segment saw blade 3

HCS plunge-cutting saw blade for wood 3

Sanding sheet set Wood-top 3

Allen key 3


Multifunction Tool

Oscillation15,000–21,000 oscillations per minute at 2.8 angular degrees allow for precise working without kick-back.

MotorThe powerful 180-watt motor ensures sustained performance. Low vibrations without self-movements of the tool and the infinitely adjustable electronics increase convenience.

ToolholderThe attachments can be inserted into the toolholder in different positions. The positive engagement of the toolholder prevents any risk of slipping. The single-screw principle enables easy and fast tool changes.

Connection for dust extractionThe port for connecting a vacuum cleaner allows for clean working and a clear view of the work area.• Oscillation principle for versatile

applications – multifunctional and precise with powerful 180 watts

• Bosch Electronic: infinitely variable control of the oscillation speed by turning the setting wheel – to suit the material being worked on

• Toolholder with universal screw – fast and uncomplicated changing of all accessories with the Allen key

• Integrated connection for dust extraction

Sawing, cutting, routing, sanding.... The multifunction tools from Bosch offer countless possibilities for putting DIY ideas into practice.

The Technology

Features:

43

Multifunction

Tools

Specifications PDO 6 PDO Multi

Max. detection depthfor iron 6 cm 8 cmfor copper 5 cm 6 cmfor power cables 3 cm 5 cmfor wood – 2–3 cm

Calibration automatic automatic

Battery 1 × 9 V 6LR61 1 × 9 V 6LR61


Part number 0 603 010 100 0 603 010 000


Protective case – 3

2 marking pencils – 3

Battery 3 3

Digital Detectors

Maximum safety when drillingThe Bosch Detectors reliably detect, for

example, electrical cables. Green light for drilling: the luminous ring shows where you can drill. You can then mark the detected position immediately with a pencil.

Red lightObject found

Green lightOK to drill

For example, the PDO Multi:

Detection of metals

Detection of electrical cables

Detection of wooden substructures

Zoom modeRefines the search and enables exact locating of objects.

• Detection of metals and electrical cables• High detection depth• Detected objects are indicated

by a luminous ring• Concise display• Small and handy• Battery operation

You should play it safe if you want to drill in walls: the handy digital detectors from Bosch enable you to find live cables, pipes or girders and frames made of metal, as well as wooden substructures, with the highest precision and safety.

The Technology

Features:


Dig

ital

M

easu

ring

To

ols

Digital Laser Rangefinders

Laser technologyTruly accurate measurement results can only be achieved by measuring with laser technology.

Laser measurement with PLR 30Precise measurement using a laser. Measurement

accuracy ± 2 mm over 30 m.

In comparison:

Ultrasound measurementTapered measurement using ultrasound. Measurement accuracy ± 50 mm over 10 m.

Digital displayConcise display of the measurement results.

Extremely compactAs small as a mobile phone, the PLR 30 fits in any pocket.

• Measurement range 0.2–30 m• Extremely accurate due to laser

technology• Measurement functions: length, area,

volume and continuous measurement• Memory function• Addition and subtraction

of measured values• Large digital display• Battery operation

Equipped with state-of-the-art laser technology, the rangefinders from Bosch deliver measurement results with maximum precision and reliability.

The Technology

Features:

Specifications PLR 30

Laser diode 650 nm

Laser class 2

Measurement range 0.2 – 30.0 m

Measurement accuracy, typ. ± 2.0 mm

Measurement time, typ. < 0.5 s

Measurement time, max. 4 s

Power supply 4 x 1.5 V LR03 (AAA)

Automatic deactivation 5 mins

Weight 0.18 kg

Length measurement function ✓

Area measurement function ✓

Volume measurement function ✓

Continuous measurement function ✓

Indirect measurement function

Reference level of measurement Rear edge



Protective pouch ✓

Battery ✓

45

Digital

Measuring Tools

Specifications PLL 5

Working range*, approx. 5 m

Laser diode 635 nm

Laser class 2

Accuracy ± 1.0 mm/m

Weight 0.12 kg

Spirit level function integrated

Battery 2 × 1.5 V LR03 (AAA)



Battery 3

Wall holder 3

Specifications PCL 1 Set

Working range*, approx. 10 m

Laser diode 635 nm

Laser class 2M

Self-levelling time, typ. 4 s

Levelling range ≤ 5 °

Accuracy ± 0.5 mm/m

Tripod thread 1/4’

Weight 0.50 kg

Battery 4 × 1.5 V LR6 (AA)



Protective case 3

Batteries 3

Wall Holder –

Tripod (1.10 m) 3

Laser Spirit Level

Laser technologyThe high-quality laser projects a particularly clearly visible laser line

up to 5 metres.

Height adjustmentThe integrated magnet can be used to finely adjust the exact position of the laser

on the wall holder.

Aluminium contact surfaceThe PLL 5 can also be used as a ‚normal‘ spirit level for fast levelling work.

Cross-Line Laser LevelAt the push of a button, you have the option of a horizontal, vertical, slanted

or cross fire laser line, which can be switched on/off separately and is projected onto the wall to assist you with your work. Diagonal lines are also possible in a special mode.

Self-levelling laser linesThe innovative, self-levelling laser technology allows for accurate working without manual settings.

Cross-Line Laser Levels

• For all horizontal and vertical levelling work

• Projects a laser line up to 5 m• High-quality, bright laser• Particularly small and handy,

fits in any pocket• Practical wall holder – can be fixed to any surface

– allows for fine adjustment of the exact position of the laser

• Can also be used as a manual spirit level• Battery operation

• Self-levelling laser lines that can be switched on/off individually

• Horizontals, verticals, cross-lines or angles

• 10 m working range• 2 high-quality, bright lasers• 1/4‘ thread for use on a normal

camera tripod• Battery operation

*depending on lighting conditions

*depending on lighting conditions

Precise alignments, visible edges and geometric applications? No problem for the laser spirit level from Bosch.

The cross and line lasers from Bosch now make complicated alignment of objects a thing of the past. Levelling work can be completed quickly and precisely thanks to state-of-the-art laser technology and extremely easy operation.

The Technology

The Technology

Features:

Features:


Dig

ital

M

easu

ring

To

ols

SprayControl TechnologyThe high level of fine paint atomisation ensures brilliant paint application. The air jacket that envelops

the paint jet enables precise and clean application of various spray materials. When the work is finished, only the parts used to guide the paint are separated by SDS and can be cleaned quickly and easily.

Electronic airflow control The airflow can be set electronically via the continuously variable 2-1 switch, in order to control

the paint mist and the speed of the paint application. The low airflow stage is used for a material with thin viscosity and a high airflow stage is used for a material with thick viscosity. A high airflow stage also results in faster paint application. (Only for PFS 105 E)

3-stage paint nozzleFor more diversity and flexibility when working.

Bosch SDSSDS system ensures easy, fast paint changes and easy cleaning.

Paint flow controlThe continuously variable flow control allows for precise working.

• SprayControl Technology• 3-stage controllable paint nozzle

(horizontal, vertical, pencil jet)• Handle extension makes it safe

to set the gun down• Paint tank with level indicator• Parked position for work breaks

The fine spray systems from Bosch ensure brilliant paint application. They enable you to measure the precise amount of paint, they are suitable for materials of various levels of viscosity and they offer a versatile range of applications for work in the house and garden.

The Technology

Features:

Specifications PFS 55 PFS 65


Max. pumping capacity 0 – 110 g/min 0 – 130 g/min

Atomisation energy 55 W 65 W

Paint application 5 m2 in 12 mins 5 m2 in 10 mins

Tank volume 600 ml 600 ml


Hose length – 1.8 m

Part number 0 603 206 040 0 603 206 140


600-ml tank ✓ ✓

Measuring container 100 ml ✓ ✓

Handle extension ✓ ✓

Carrying strap – ✓

Training DVD ✓ ✓

Fine Spray Systems

Air cap Jet Application

Vertical fan jet for horizontal working direction

Horizontal fan jet for vertical working direction

Pencil jet for corners, edges and hard-to-reach areas

NEW NEW

47

Decoration Tools

Specifications Cordless Tacker PTK 3.6 V


Impact rate 30 bpm

Application range with 11.4-mm staples 6–14 mm

Nails 14 mm


Bosch Electronic

Mechanical impact force preselection 3

Staple supply display 3

Bosch duotac automatic

Softgrip 3

PowerLight 3



5-hour charger 3

Battery pack(s) 3

1000 staples (type 53, length 8 mm) 3


Electric Tacker

Impact controlImpact is controlled either at the touch of a trigger switch or by pressing the tacker nose to the workpiece. You can choose between single impact or continuous impact for quicker repeat work.

Safety noseThe impact can only be triggered in the work position.

Impact force preselectionThe setting wheel can be used to preselect the required impact force in stages.

PowerLightThe integrated PowerLight enables you to work in dark and awkward areas.

SoftgripErgonomically shaped handle with softgrip and large switch for effortless work.• For rapid stapling of insulation

material, foils, textile wallpapers and many more materials.

• Front arrangement of tacker nose for tacking close to edges

• Staple supply display

Say goodbye to hammers, screws, glue and pins: the powerful tacker from Bosch helps you to quickly and easily fix panels and hard fibre boards and to fit insulation and decoration materials such as foils, strips or even fabrics.

The Technology

Features:


Dec

orat

ion

Too

ls

Specifications Xeo

Max. cutting strength 6 mm

No-load speed 240 rpm


Charge time 5 hours

Cutting performance up to 150 mper battery charge

Machine weight with battery 0.4 kg

Lock-on switch 3

AutoSharp 3



5-hour charger 3

Specifications PKP 18 E

Gluing capacity 20 g/min

Glue stick diameter 11 × 45–200 mm

Voltage 100–240 V




1 glue stick 3

1 extra-long nozzle 3

Cordless Universal Cutter

Lithium-ion technologyThanks to its lithium-ion technology, the Xeo holds its charge even if

it has not been used for months at a time. You can recharge it at any time without any problems – regardless of whether the battery is fully charged, half charged or flat. The lithium-ion technology makes it possible to equip the Xeo with an extremely small battery.

Charge level indicatorAn LED enables you to check the battery power quickly and easily.

SoftgripThanks to the ergonomic design with softgrip, any hand feels great with the Xeo.

Glue Gun

Mechanical feed systemThe glue feed for application can be finely regulated by means of a mechanical feed

system operated by the large switch.

Bosch Constant ElectronicAutomatic temperature control with electronically regulated heating elements for even glue consistency.

• Lithium-ion technology• No self-discharge• No memory effect• AutoSharp: self-sharpening blade• Charge level indicator via LED• Lock-on switch• Softgrip

• Bosch Constant Electronic• Glue stick up to 200 mm• Mechanical feed system: fine application

of glue – rapid, targeted application• Glue stick guide with viewing glass• Ready to use quickly thanks to glue

stick pre-heating• Practical nozzle with heat protection

cladding and anti-drip device• Wire stand makes it safe to set

the glue down• Temperature-resistant housing

with protective insulation

Decoration materials, cardboard or carpet: the Xeo cordless universal cutter from Bosch enables you to effortlessly and quickly cut all different kinds of flexible materials at any time – without a cable.

The glue gun from Bosch is ideal for adhesive attachment, model making, repairing, sealing and jointing. They stick almost anything: wood, plastic, ceramic, metal, glass, textiles, leather and much more.

The Technology

The Technology

Features:

Features:

49

Decoration Tools

Specifications PHG 630 DCE PHG 500-2


Temperature 50–630 °C 300 / 500 °C

Airflow 150 / 300 / 500 l/min 240 / 450 l/min


Thermal stop 3 3

Removable heat shield 3 –

Bosch Softgrip 3 –

Cold-air setting, 50 °C 3 –

Infinitely variable temperature control 3 –

Bosch Constant Electronic 3 –

Display 3 –

Part number 0 603 29C 737 0 603 29A 037

Heat Guns

Temperature displayA wide range of possible applications thanks to infinitely variable temperature

setting (50–630 °C) via a display (PHG 630 DCE). Cold-air setting for fast cooling and working at low temperatures (PHG 630 DCE).

Bosch Constant ElectronicThe preset temperature is kept constant electronically. For especially precise work,

e.g. soldering and welding (PHG 630 DCE).

Airflow controlThe airflow can be controlled over several stages. The lower airflow stage is used

to prevent the area surrounding the workpiece from overheating or to prevent light workpieces from shifting in the airflow. A higher airflow stage allows the workpiece to be heated more quickly.

Thermal stopAutomatic deactivation of the heating element to prevent overload

(Thermal Protection).

Bosch SoftgripConvenient handling and non-tiring working thanks to the ergonomic design

and softgrip.

• Thermal stop• Control of temperature and airflow

in stages• Support surface for bench-mounted

operation• Closed handle for safe work

Hot air guns from Bosch are perfectly suited to thawing, drying, speeding-up the drying process of glued connections, shaping, and dust-free removal of paint.

The Technology

Features:


Dec

orat

ion

Too

ls

Specifications PAS 11-21

Power input 1100 W

Max. airflow (at blower) 50 l/s

Max. ventilating pressure (at blower) 150 mbar

Container volume 21 L




Hose 2 m, 35 mm diameter 3

2 suction pipes, 0.5 m each 3

Crevice nozzle 21 cm 3

Coarse dirt nozzle 3

Paper filter bag 3

Permanent fabric filter 3

All Purpose Vacuum Cleaner

Sturdy permanent fabric filterThe Bosch All Purpose Vacuum Cleaners are

equipped with a sturdy permanent fabric filter which is easy to clean. The filter can remain in the cleaner when water is sucked in. Prior to using the cleaner for dry vacuum cleaning again, the permanent fabric filter should be left to dry thoroughly. An additional paper filter bag makes emptying easy and prevents most of the dust from escaping.

Hose system with snap lockThe Bosch All Purpose Vacuum Cleaners have an optimised hose system with snap lock. The hose is safely seated in the container. The connection can be turned, making the cleaner more flexible – no twisted or bent hoses.

Practical cable and accessory rack plus shelfEspecially practical is the cable and accessory rack

plus additional shelf surface for cleaner accessories, nozzles and other small parts.

Automatic remote switch-on facilityMany Bosch Power Tools have a connection for dust

extraction. The Bosch All Purpose Vacuum Cleaner is the ideal tool for this connection. It extracts chippings and dust effortlessly.

• Robust, powerful wet/dry vacuum cleaner

• Compact design• Sturdy permanent fabric filter• Hose system with snap lock• Cable and accessory rack plus shelf• Float valve

The all purpose vacuum cleaner from Bosch show its true potential where wet and dry vacuuming in the workshop, house, courtyard, garden or car is concerned. Purpose-built details such as the freely rotating hose, guide rollers, accessory rack and the rest area for small parts transform the cleaner into an all-round practical helper.

The Technology

Features:

51

All P

urpose

Vacuum

Cleaners

The best projects, detailed

instructions, hints and tips from

professionals, comprehensive

product information and much

more: bosch-do-it.com meets

all your DIY needs.

The House of Boschnow at www.bosch-do-it.com.au!

Are you looking for fresh project ideas to pep up your home? You will find them for every area of your home at our new website, bosch-do-it.com.au. Welcome to the House of Bosch – where ideas live!

Have a look around the House of Bosch and you will instantly notice that every room is full of ideas. When taking the

virtual tour through the kitchen, bathroom or living room, you will find great projects to help you make your home

even more attractive. From an elegant room divider to a practical side table, from easy to demanding – see what

inspires you most! To ensure that you enjoy building these objects from beginning to end, every project is explained

step by step. There is also a comprehensive DIY encyclopaedia that explains the most important terms, and there

are helpful hints and tips contributed by professionals. And if you are yet to obtain the right tool for the job, you can

browse through a detailed overview of all Bosch power tools in the

online product catalogue. What else is there to discover? Why not

pay us a visit? The doors of the House of Bosch are always open

to you!

Great ideas for every area

Experts

€150

1/2 – 1 day

Robert Bosch (Australia) Pty. Ltd.

1555 Centre Road Clayton Vic 3168

Phone: 1300 30 70 44 Fax: 1300 30 70 45

www.bosch-pt.com.au

Robert Bosch (New Zealand) Ltd.

Phone: 0800 543 353 Fax: 0800 428 570

www.bosch-pt.co.nz

Printed in Australia KRD 02/2009 – RB 1871 PG

Whilst every care has been taken in the preparation of this publication, Bosch does not warrant the accuracy or completeness of the information in this publication and Bosch reserves the right to alter specifications without notice. To the extent permitted by law, Bosch excludes all liability, including negligence, for any loss incurred in reliance on the contents of this publication.

Available here:

Why should you choose Bosch Power Tools for your DIY work? Quite simply because we offer the best solution for each of your challenges. And because each of our products is manufactured to the highest quality standards, ensuring that you will enjoy your tool for a long time. Should your Bosch Power Tool however break down at any time, we will quickly repair it. And at the end of its long life, we guarantee that your Bosch Power Tool can be disposed of in an environmentally-friendly manner.

Bosch Power Tools:100% Quality, 100% Service.

F005XP0074

Documents

Bosch diy-au-en