BOSS Flamco Pipe Support System

1.1

Flamco have manufactured pipe support systems for

50 years, the complete range has been exclusive to

BSS under the BOSS Flamco brand for 38 years.

Their extensive range of product is used for

supporting horizontal and vertical heating and air

conditioning pipework with buildings.

In addition to standalone product, Flamco can also

offer a bespoke prefabrication solution from

conception through to completion - a flexible and

practical approach for our clients.

BOSS Flamco Pipe Support System Introduction

31016_bss_site support_final_Layout 1 1/8/10 12:42 PM Page 1.1

1.2

Typical Method of Installing a Pipe Hangerto BOSS Flamco RailThe resulting installation is quick, strong, secure, flexible and neat.

1

Secure rod to thefixing point

2

Fit ‘T’ cap onto rodand push sleeve into it

3

Screw and tightenthe ball head ontothe threaded rodsecurely

4

Fit the clip aroundthe pipe

5

Press clip jawsaround the ball head

6

Pull sleeve and captheir full distancedown over clip jaws

PVC ‘T’ CAP 3 STANDARD SIZES

THREADED ROD

SLEEVE

THREADED BALL HEAD

JOGGLE

CLIPA full range of sizes to fit allapplications are available

Easy and simple to use pipe support system

BASIC HANGER ASSEMBLY


1.3

BOSS Flamco BK Unlined Pipe Hangers for steel tube (BBA approved)•The hanger is used for installing steel tube horizontally.•Comprises three components and is supplied as acomplete assembly in a large variety of sizes.

Typical installation to Flamco rail

Features• Max. swing of thepipe hanger 2 x 6°

• BK12 sleeve withlocking system

• Temperature range: -20°C to +120°C

Construction and Coating • Bracket BK6 zinc-coated material(Sendzimir)

• Bracket BK8 zinc-coated material(Sendzimir)

• Bracket BK12electrolytically zinc-plated

• Sleeveelectrolytically zinc-plated

• Ball headelectrolytically zinc-plated

For installationdimensions whenusing BO ExtensionPieces see page 1.30.

Note 1: Should beinstalled with a ‘T’ cap (see page1.29).

Note 2: Technicaladvice should besought for use onsteam lines.


BOSS Flamco BK Unlined Pipe Hangers

Hangers foruse withEN10255steel tube

Full rangeof BK pipehangers

Continued>>* This hanger has no joggle.

Hanger EN10255 Clip Thread Maximum Clip material Dim BSSreference Steel tube ID working width x ‘A’ code

NB Approx load thicknessinch OD mm mm N mm mm

*BK 6 x 3/8" 3/8 17.2 17.7 M6 1500 12 x 1.5 40 19010006BK 6 x 1/2" 1/2 21.3 21.8 M6 1500 12 x 1.5 40 19010017BK 6 x 3/4" 3/4 26.9 27.4 M6 1500 12 x 1.5 40 19010028BK 6 x 1 1 33.7 34.2 M6 1500 12 x 1.5 40 19010039BK 6 x 44 11/4 42.4 45.0 M6 1500 12 x 1.5 40 19010050BK 6 x 51 11/2 48.3 51.5 M6 1500 12 x 1.5 40 19010061BK 6 x 62 2 60.3 62.0 M6 1500 12 x 1.5 40 19021132BK 8 x 78 21/2 76.1 78.8 M8 2500 16 x 1.9 54 19010083BK 8 x 90 3 88.9 90.9 M8 2500 16 x 1.9 54 19010094BK 12 x 121 4 114.3 122.2 M12 5000 25 x 2.75 60 19010102BK 12 x 146 5 139.7 147.5 M12 5000 25 x 2.75 60 19010113BK 12 x 171 6 165.1 172.7 M12 5000 25 x 2.75 60 19010124BK 6 x 38 - - 38.5 M6 1500 12 x 1.5 40 19021110BK 6 x 44 - - 45.0 M6 1500 12 x 1.5 40 19010050BK 6 x 51 - - 51.5 M6 1500 12 x 1.5 40 19010061BK 6 x 57 - - 57.6 M6 1500 12 x 1.5 40 19021121BK 6 x 62 - - 62.0 M6 1500 12 x 1.5 40 19021132BK 6 x 64 - - 64.1 M6 1500 12 x 1.5 40 19010072BK 8 x 68 - - 68.5 M8 2500 16 x 1.9 54 19011606BK 8 x 70 - - 70.7 M8 2500 16 x 1.9 54 19019803BK 8 x 74 - - 74.5 M8 2500 16 x 1.9 54 19011617BK 8 x 76 - - 76.9 M8 2500 16 x 1.9 54 19019814BK 8 x 78 - - 78.8 M8 2500 16 x 1.9 54 19010083BK 8 x 83 - - 83.3 M8 2500 16 x 1.9 54 19019825BK 8 x 87 - - 87.5 M8 2500 16 x 1.9 54 19011628BK 8 x 89 - - 89.8 M8 2500 16 x 1.9 54 19021143BK 8 x 90 - - 90.9 M8 2500 16 x 1.9 54 19010094BK 8 x 95 - - 96.0 M8 2500 16 x 1.9 54 19019836BK 8 x 98 - - 98.5 M8 2500 16 x 1.9 54 19011639BK 8 x 102 - - 102.6 M8 2500 16 x 1.9 54 19020034

1.4


1.5

BOSS Flamco BK Unlined Pipe Hangers

BK 12 x 105 - - 105.5 M12 5000 25 x 2.75 60 19011650BK 12 x 108 - - 109.1 M12 5000 25 x 2.75 60 19019847BK 12 x 113 - - 113.5 M12 5000 25 x 2.75 60 19011661BK 12 x 114 - - 115.4 M12 5000 25 x 2.75 60 19019858BK 12 x 121 - - 122.2 M12 5000 25 x 2.75 60 19010102BK 12 x 125 - - 125.5 M12 5000 25 x 2.75 60 19011672BK 12 x 127 - - 128.3 M12 5000 25 x 2.75 60 19020045BK 12 x 133 - - 134.3 M12 5000 25 x 2.75 60 19021154BK 12 x 137 - - 137.5 M12 5000 25 x 2.75 60 19011683BK 12 x 140 - - 141.1 M12 5000 25 x 2.75 60 19019869BK 12 x 144 - - 144.5 M12 5000 25 x 2.75 60 19011694BK 12 x 146 - - 147.5 M12 5000 25 x 2.75 60 19010113BK 12 x 152 - - 153.9 M12 5000 25 x 2.75 60 19021165BK 12 x 159 - - 160.6 M12 5000 25 x 2.75 60 19019880BK 12 x 165 - - 165.5 M12 5000 25 x 2.75 60 19011702BK 12 x 168 - - 170.0 M12 5000 25 x 2.75 60 19019891BK 12 x 171 - - 172.7 M12 5000 25 x 2.75 60 19010124BK 12 x 178 - - 179.6 M12 5000 25 x 2.75 60 19010168BK 12 x 185 - - 185.5 M12 5000 25 x 2.75 60 19011713BK 12 x 193 - - 195.6 M12 5000 25 x 2.75 60 19010190BK 12 x 199 - - 199.5 M12 5000 25 x 2.75 60 19011724BK 12 x 205 - - 205.5 M12 5000 25 x 2.75 60 19011735BK 12 x 216 - - 218.2 M12 5000 25 x 2.75 60 19021187BK 12 x 219 - - 221.3 M12 5000 25 x 2.75 60 19010135BK 12 x 225 - - 225.5 M12 5000 25 x 2.75 60 19011746BK 12 x 231 - - 231.5 M12 5000 25 x 2.75 60 19011757BK 12 x 241 - - 243.4 M12 5000 25 x 2.75 60 19019910BK 12 x 251 - - 251.5 M12 5000 25 x 2.75 60 19011768BK 12 x 267 - - 269.7 M12 5000 25 x 2.75 60 19010146BK 12 x 273 - - 275.7 M12 5000 25 x 2.75 60 19019921BK 12 x 299 - - 301.5 M12 5000 25 x 2.75 60 19010179BK 12 x 323 - - 327.1 M12 5000 25 x 2.75 60 19010157

Hanger EN10255 Clip Thread Maximum Clip material Dim BSSreference Steel tube ID working width x ‘A’ code

NB Approx mm load thickness mminch OD mm N mm

Full rangeof BK pipehangers


1.6

BOSS Flamco BKK Unlined Pipe Hangers

Hanger EN1057 R250 Clip Thread Maximum Clip material Dim BSSreference Copper tube ID working width x A code

Table ‘X’ mm load thickness mmOD mm N mm

*BKK 6 x 12 12 12.0 M6 650 12 x 1.5 40 19010305*BKK 6 x 15 15 15.0 M6 650 12 x 1.5 40 19010316BKK 6 x 22 22 22.0 M6 650 12 x 1.5 40 19010327BKK 6 x 28 28 28.0 M6 650 12 x 1.5 40 19010338BKK 6 x 35 35 35.0 M6 650 12 x 1.5 40 19010349BKK 6 x 42 42 42.0 M6 650 12 x 1.5 40 19010360BKK 6 x 54 54 54.0 M6 650 12 x 1.5 40 19010371BKK 8 x 70 67 70.7 M8 1000 16 x 1.9 54 19010382BKK 8 x 76 76 76.9 M8 1000 16 x 1.9 54 19010393BKK 12 x 108 108 109.1 M12 1500 25 x 2.75 60 19010401BKK 12 x 133 133 134.3 M12 1500 25 x 2.75 60 19010412BKK 12 x 159 159 160.6 M12 1500 25 x 2.75 60 19010423* These hangers have no joggle

• The hanger is used for installing copper tube horizontally.•Comprises three components and is supplied as acomplete assembly.

BKK PIPE HANGERS FOR EN1057 R250 TABLE ‘X’ COPPER TUBE

Typical installation to Flamco rail


Material andCoating• Bracket copper• Sleeveelectrolyticallyzinc-plated

• Ball headelectrolyticallyzinc-plated

Note: Should beinstalled with a ‘T’cap, see page 1.29.


1.7

Hanger EN10255 Thread Min breaking Strip L1 L2 L3 BSSreference Steel tube load dimensions min. min. min. code

NB required mm mm mm mminch N*

BKS 10 x 3/4 3/4 M10 1512 12 x 1.5 87 104 72 19010508BKS 10 x 1 1 M10 1824 12 x 1.5 87 107 75 19010519BKS 10 x 11/4 11/4 M10 1913 12 x 1.5 87 111 79 19010530BKS 10 x 11/2 11/2 M10 2313 12 x 1.5 87 114 82 19010541BKS 10 x 2 2 M10 2815 12 x 1.5 87 120 88 19010552BKS 10 x 76 21/2 M10 4181 16 x 1.9 132 173 111 19010563BKS 10 x 89 3 M10 4715 16 x 1.9 132 180 118 19010574BKS 12 x 114 4 M12 6561 25 x 2.75 186 242 180 19010596BKS 12 x 140 5 M12 8896 25 x 2.75 190 260 198 19010604BKS 12 x 168 6 M12 11632 25 x 2.75 195 279 217 19010615BKS 12 x 219 8 M12 16903 25 x 2.75 210 320 258 19010626

BOSS Flamco BKS Unlined Pipe Hangerfor Sprinkler Systems

Features• Rigid fastening

• *Breaking loads asper FM standards

Coatings• Bracket BKS 10Sendzimir

• Bracket BKS 12electrolyticallyzinc-plated

• Washerelectrolyticallyzinc-plated

• Sleeveelectrolyticallyzinc-plated

• Ball headelectrolyticallyzinc-plated

These clips, specifically designed for use in sprinkler systems, aremanufactured to FM Standards, meeting the Factory Mutual ResearchCorporation, Boston, USA requirements for the suspension of sprinklerpiping and have also been approved by the NFPA. The clip design,which is heavier than the standard brackets, ensures that the piping isrigidly secured to withstand the shock loads imposed on the pipesupport system when the sprinkler installation operates.

Approval• FM approved with extra locknutand washer onsizes 21/2" andabove

Note: The sizes 3/4"up to and including2" are supplied witha nut, the sizes from76 on are suppliedwith a nut andwasher.

FM

Typical installation


1.8

Hanger Pipe Thread Approval Min. test BSSreference EN10255 Steel tube breakload* code

NB OD FM VdS FM VdSinch mm

BES 8 x 3/4 3/4 26.9 M8 - � 1512 4000 19012106

BES 8 x 1 1 33.7 M8 - � 1824 4000 19012117

BES 8 x 11/4 11/4 42.4 M8 - � 1913 4000 19012128

BES 8 x 11/2 11/2 48.3 M8 - � 2313 4000 19012139

BES 8 x 2 2 60.3 M8 - � 2815 4000 19012150

BES 10 x 3/4 3/4 26.9 M10 �� - 1512 4000 19012161

BES 10 x 1 1 33.7 M10 � - 1824 4000 19012172

BES 10 x 11/4 11/4 42.4 M10 � - 1913 4000 19012183

BES 10 x 11/2 11/2 48.3 M10 � - 2313 4000 19012194

BES 10 x 2 2 60.3 M10 � - 2815 4000 19012202

BES 10 x 21/2 21/2 76.1 M10 � � 4181 7000 19012213

BES 10 x 3 3 88.9 M10 � � 4715 7000 19012224

BES 10 x 31/2 31/2 101.6 M10 � � 5583 7000 19012235

BES 10 x 108 - 108 M10 � � 6055 7000 19012246

BES 10 x 114 4 114.3 M10 � � 6561 7000 19012257

BES 12 x 133 - 133 M12 � � 8534 10000 19012268

BES 12 x 140 5 139.7 M12 � � 8896 10000 19012279

BES 12 x 159 - 159 M12 � � 11104 10000 19012290

BES 12 x 168 6 168.9 M12 � � 11632 10000 19012309

BES 12 x 219 8 219.1 M12 � - 16903 17000 19012320

BES 16 x 219 8 219.1 M16 - � 16903 17000 19012331

Features• One-piece clipguarantees a highpermissible load

• Mounting withoutany tools

• Locking deviceallowing easypremounting

• Height adjustable

Coatings• Sendzimir steelexcept 8" versionwhich iselectrolyticallygalvanized

Approval• FM and VdSapproved

* Min. breaking load according to FM/VdS regulation.

•BES pipe hangers are designed for mountingsprinkler system pipes to ceilings.

• They meet the requirements of both FM andVdS standards.

BOSS Flamco BES Unlined PipeHanger for Sprinkler Systems


1.9

Clip Clip Nut Max. Clip material *EN10255 Steel tube BSSreference ID range working width x thick- NB Approx code

mm load ness mm inch OD mm

BSF 8/10 13.0-17.5 M8/10 1650 20 x 2.5 3/8 17.2 19041989BSF 8/10 21-25.5 M8/10 1650 20 x 2.5 1/2 21.3 10942006BSF 8/10 26.5-30.5 M8/10 1650 20 x 2.5 3/4 26.9 19042017BSF 8/10 33.5-38.5 M8/10 1650 20 x 2.5 1 33.7 19042028BSF 8/10 41-47 M8/10 1650 20 x 2.5 11/4 42.4 19042039BSF 8/10 48-54 M8/10 1650 20 x 2.5 11/2 48.3 19042050BSF 8/10 56-62.5 M8/10 1650 20 x 2.5 2 60.3 19042061BSF 8/10 62.5-69.5 M8/10 1650 20 x 2.5 - - 19042072BSF 8/10 69.5-76.5 M8/10 1650 20 x 2.5 21/2 76.1 19042083BSF 8/10 77.5-84 M8/10 1650 20 x 2.5 - - 19042094BSF 8/10 85-92.5 M8/10 1650 20 x 2.5 3 88.9 19042102BSF 8/10 93-100.5 M8/10 3000 20 x 2.5 - - 19042113BSF 8/10 101.5-110 M8/10 3000 20 x 2.5 - - 19042124BSF 8/10 110-117.5 M8/10 3000 20 x 2.5 4 114.3 19042135BSF 8/10 119.5-127.5 M8/10 3000 20 x 2.5 - - 19042146BSF 10 127.5-133.5 M10 3000 20 x 2.5 - - 19022156BSF 10 134.5-142.5 M10 4000 30 x 3.0 5 139.7 19022167BSF 10 143.5-150.5 M10 4000 30 x 3.0 - - 19022178BSF 10 151.5-159.5 M10 4000 30 x 3.0 - - 19022189BSF 10 163.5-171.5 M10 4000 30 x 3.0 6 165.1 19022337BSF 10 172.5-182 M10 4000 30 x 3.0 - - 19022348BSF 12 93-100.5 M12 3000 25 x 2.5 - - 19022208BSF 12 101.5-110 M12 3000 25 x 2.5 - - 19022219BSF 12 110-117.5 M12 3000 25 x 2.5 - - 19022230BSF 12 119.5-127.5 M12 3000 25 x 2.5 - - 19022241BSF 12 127.5-133.5 M12 3000 25 x 2.5 - - 19022252BSF 12 134.5-142.5 M12 4000 30 x 3.0 - - 19022263BSF 12 143.5-150.5 M12 4000 30 x 3.0 - - 19022274BSF 12 151.5-159.5 M12 4000 30 x 3.0 - - 19022285BSF 12 163.5-171.5 M12 4000 30 x 3.0 - - 19022296BSF 12 172.5-182 M12 4000 30 x 3.0 - - 19022304BSF 12 192.5-198 M12 4000 30 x 3.0 - - 19022315BSF 12 215-220 M12 4000 30 x 3.0 8 219 19022326

BOSS Flamco BSF Unlined ClipsSuitable for steel tubes which have to be fitted close to ceilings andwalls. The range includes sizes to accommodate insulation blocks for1/2" to 4" N.B. EN10255 steel tube (15mm-50mm thick) and 15mm-76mm EN1057 R250 Table ‘X’ copper tube (15mm-50mm thick).

Features • Connection sizesM8, M10 or M12according to sizeof clip

• Certain smallersizes are availablewith either M8 orM10 connections

• Temperaturerating: -20°C to+120°C

• Screws suppliedwith retainingwashers

Coating • Electrolyticallyzinc-plated

* The BSF Clipwhen fitteddirectly to EN10255 steeltube will fit tightonto the tube.

* Larger sizesavailable, pleasecontact your local BSS branch.

Typicalinstallations


1.10

Clip Clip Nut Max. Clip material *EN10255 BSSreference ID range working width Steel tube code

mm load x thickness NB Approx mm inch OD mm

BSFD 10 21-25.5 2 x M10 1000 20 x 2.5 1/2 21.3 19022400

BSFD 10 26.5-30.5 2 x M10 1000 20 x 2.5 3/4 26.9 19022411

BSFD 10 33.5-38.5 2 x M10 1000 20 x 2.5 1 33.7 19022422

BSFD 10 41.5-47 2 x M10 1000 20 x 2.5 11/4 42.4 19022433

BSFD 10 48-54 2 x M10 1000 20 x 2.5 11/2 48.3 19022444

BSFD 10 56-62.5 2 x M10 1000 20 x 2.5 2 60.3 19022455

Features• Connection sizes,M2 x M10 of clip



Coating• Electrolyticallyzinc-plated

* The BSF clip whenfitted directly toEN10255 steeltube will fit tightonto the tube.

* Larger sizesavailable, pleasecontact your localBSS branch.

Typical installations

BOSS Flamco BSFD Unlined Clips


1.11

BOSS Flamco BSU Unlined Clips

Note: The BSU clipwhen fitted directlyto EN10255 steeltube will fit tightonto the tube.

Clip ref./ Pipe Threaded Max. Strip BSSExt. dia. EN10255 working dimensions code

of pipe from Steel tube load– to mm NB inch N (V=3) mm

BSU 20-25 1/2" M8/10 500 20 x 1.5 19023306

BSU 26-30 3/4" M8/10 600 20 x 1.5 19023317

BSU 32-36 1" M8/10 800 20 x 1.5 19023328

BSU 38-43 11/4" M8/10 1000 20 x 1.5 19023339

BSU 44-49 11/2" M8/10 1200 20 x 1.5 19023350

BSU 56-61 2" M8/10 1300 20 x 1.5 19023361

BSU 75-80 21/2" M8/10 1500 20 x 1.5 19023372

BSU 87-92 3" M8/10 1500 20 x 1.5 19023383

BSU 108-116 4" M8/10 2000 20 x 2.5 19023424

BSU 131-141 5" M8/10 2000 20 x 2.5 19023435

BSU 165-169 6" M8/10 2000 20 x 2.5 19023446

BSU 108-116 4" M10/12 2000 20 x 1.5 19023394

BSU 131-141 5" M10/12 2000 20 x 1.5 19023402

BSU 165-169 6" M10/12 2000 20 x 1.5 19023413

Features• Dual connectionsizes either M8/10or M10/12according to size

• Temperature range



•A lightweight clip designed for close mountingsteel pipes to the wall or ceiling.


1.12

BOSS Flamco BSO Unlined Clips for steel tube

Clip Clip Max. Clip Bolts *EN10255 BSSreference ID range working Steel tube code

mm load NB Approx N inch OD mm

BSO 2" 56 - 62.5 1200 20 x 2.5 M8 x 25 2 60.3 19056009BSO 21/2" 69.5 - 76.5 1200 20 x 2.5 M8 x 25 21/2 76.1 19056020BSO 3" 85 - 92.5 1200 20 x 2.5 M8 x 25 3 88.9 19056031BSO 4" 110 - 117.5 2000 20 x 2.5 M10 x 30 4 114.3 19056042BSO 5" 134.5 - 142.5 4000 30 x 3 M10 x 30 5 139.7 19056053* Larger sizes available, please contact your local BSS branch.

Features• Connection sizeseither M10 orM12 using J.B. Hanger



BOSS Flamco JB Hanger

Reference Connection Thread Max BSSsize working code

load N

JB10 M10 M10 6000 19056075

Features• Available M10 or M12

• Nut incorporated



1.13

1

Drill wall and insertthe wall plug

2

Fit locknut and screwin woodscrew usingdrive cap

3

Remove the drive capand push on thecollar

4

Fit clip around thepipe

5

Close clip and pushon collar

6

Tighten the locknutagainst the collar

Typical Method of Installing BOSS Flamco Wall Clip

WOODSCREW

LOCKNUT

COLLAR

CLIP

BASIC WALL CLIP ASSEMBLY


Clip Clip Thread Clip EN10255 BSSreference inside material width Steel tube code

dimension x thickness NB Approx mm mm inch OD mm

BM 8 x 3/8" su 18.2 M8 10 x 1.2 3/8 17.2 19015507BM 8 x 1/2" su 22.3 M8 10 x 1.2 1/2 21.3 19015518BM 8 x 3/4" su 27.9 M8 10 x 1.2 3/4 26.9 19015529BM 8 x 1" su 34.7 M8 10 x 1.2 1 33.7 19015540BM 10 x 11/4" su 43.4 M10 12 x 1.5 11/4 42.4 19015551BM 10 x 11/2" su 49.3 M10 12 x 1.5 11/2 48.3 19015562BM 10 x 2" su 61.4 M10 12 x 1.5 2 60.3 19015573BM 12 x 76 su 77.4 M12 16 x 1.9 - - 19015488BM 12 x 83 su 83.8 M12 16 x 1.9 21/2 76.1 19015584BM 12 x 89 su 90.3 M12 16 x 1.9 3 88.9 19015595BM 12 x 114 su 115.9 M12 16 x 1.9 4 114.3 19015499

BOSS Flamco BM Unlined Wall Clips•This clip is for mounting steel tube.•Supplied as three separate components and canbe assembled with other accessories to suit yourparticular requirements as illustrated below.

Features• One piece clipheld in position bytightening thebacknut onto theconical sleeve

• Conical sleevewith locating edgefor good clamping

Construction and Coating • Clip zinc coatedmaterial(Sendzimir)


• Back nutelectrolyticallyzinc-plated

Wall fixing using a shortwoodscrew. See page 5.4 forwoodscrew information.

Wall fixing using a long woodscrew. See page 5.4 for woodscrew information.

Fixing using a backplate.Refer to pages 1.32-1.34for all types of backplateavailable.

Fixing to Flamco Rail. Referto page 5.1 for nuts, washersand railclamps. Refer to page2.16 for threaded rod.

Fixing to existing girder.Refer to page 5.1 for nutsand washers. Refer to page2.16 for threaded rod.

THE MAIN METHODS OF FIXING BM WALL CLIPS

1.14


1.15

Clip Clip Thread Clip EN1057 R250 BSSreference ID dimensions width Copper tube code

mm x thickness Table ‘X’mm OD mm

BM 8 x 12 su 12.1 M8 10 x 1.2 12 19015603BM 8 x 15 su 15.1 M8 10 x 1.2 15 19015614BM 8 x 22 su 22.1 M8 10 x 1.2 22 19015625BM 8 x 28 su 28.1 M8 10 x 1.2 28 19015636BM 8 x 35 su 35.1 M8 10 x 1.2 35 19015647BM 10 x 42 su 42.2 M10 12 x 1.5 42 19015658BM 10 x 54 su 54.2 M10 12 x 1.5 54 19015669BM 10 x 68 su 69.1 M12 16 x 1.9 67 19015710BM 10 x 76 su 77.4 M12 16 x 1.9 76 19015721

BOSS Flamco BMK Unlined Wall Clips

Features• One piece clipheld in position bytightening thebacknut onto theconical sleeve

• Conical sleevewith locating edgefor good clamping

Construction and Coating• Clip copper


• Back nutelectrolyticallyzinc-plated

•This clip is for mounting copper tube.•This clip is supplied as three separate componentsand can be assembled with other accessories to suityour particular requirements as illustrated below.

Wall fixing using a shortwoodscrew. See page 5.4 forwoodscrew information.

Wall fixing using a long woodscrew. See page 5.4 for woodscrew information.

Fixing using a backplate.Refer to pages 1.32-1.34for all types of backplateavailable.

Fixing to Flamco Rail. Referto page 5.1 for nuts, washersand railclamps. Refer to page2.16 for threaded rod.

Fixing to existing girder.Refer to page 5.1 for nutsand washers. Refer to page2.16 for threaded rod.

THE MAIN METHODS OF FIXING BMK WALL CLIPS


1.16

Clip Max. Dimensions mm EN10255 BSSreference working Steel tube code

load A B C D NB Approx N inch OD mm

BW 1/2" 600 22.6 38.3 44 31 1/2 21.3 19020610BW 3/4" 600 28.1 41.0 44 31 3/4 26.9 19020621BW 1" 600 35.1 44.5 44 31 1 33.7 19020632BW 11/4" 600 44.1 49.0 56 42 11/4 42.4 19020643BW 11/2" 600 49.6 51.8 56 42 11/2 48.3 19020654BW 2" 600 61.6 57.8 56 42 2 60.3 19020665

BOSS Flamco BW Unlined Wall ClipsBW wall clips are designed to support horizontalpipework with nominal bores from 1/2" up to andincluding 2". The clip comprises two sections, the lowersection carrying the mounting bracket which can be fixedto the wall by two No.12 woodscrews. The upper sectionof the clip can be moved to one side by slackening thelocking screw to enable the pipe to be placed in thebottom section of the clip. With the pipe in situ, refit theupper section of the clip and tighten the locking screw.


1.17

BOSS Flamco BKI RubberLined Pipe Hangersfor steel/copper tube (BBA approved)


• BKI 12 sleeve withlocking system

• Rubber, see page1.31 for SR noisesuppression striptechnicalinformation

Construction and Coating• Noise suppressionrubber strip

• Bracket BKI 6 zinc-coatedmaterial(Sendzimir)

• Bracket BKI 8 zinc-coatedmaterial(Sendzimir)

• Bracket BKI 12 electrolytically zinc-plated

• Sleeveelectrolytically zinc-plated

• Ball headelectrolytically zinc-plated

Note: Should beinstalled with a ‘T’ cap (see page1.29).

• The hanger comes fitted with a rubber noisesuppression strip and can be used for hangingeither steel or copper tube horizontally.

•Comprises four components and is suppliedas a complete assembly.

Typical installation to Flamco rail.


1.18

BOSS Flamco BKI Rubber Lined Pipe Hangersfor steel/copper tube

Hanger Clip Thread Max. Max. Clip EN10255 BSSreference ID with working working material Steel tube code

rubber load load at width x NB Approxmm N 20dB (A) N thickness mm inch OD mm

BKI 6 x 3/8" 17.7 M6 1500 400 12 x 1.5 3/8 17.2 19019600BKI 6 x 1/2" 22.7 M6 1500 400 12 x 1.5 1/2 21.3 19019611BKI 6 x 3/4" 27.4 M6 1500 400 12 x 1.5 3/4 26.9 19019622BKI 6 x 1" 35.1 M6 1500 400 12 x 1.5 1 33.7 19019633BKI 6 x 44 43.7 M6 1500 400 12 x 1.5 11/4 42.4 19019644BKI 6 x 51 51.5 M6 1500 400 12 x 1.5 11/2 48.3 19019655BKI 6 x 64 64.1 M6 1500 400 12 x 1.5 2 60.3 19019666BKI 8 x 78 78.0 M8 2500 700 16 x 1.9 21/2 76.1 19019677BKI 8 x 90 91.0 M8 2500 700 16 x 1.9 3 88.9 19019688BKI 12 x 121 121.7 M12 5000 2000 25 x 2.75 4 114.3 19019699BKI 12 x 146 148.0 M12 5000 2000 25 x 2.75 5 139.7 19019707BKI 12 x 171 172.7 M12 5000 2000 25 x 2.75 6 165.1 19019718

Other sizes available ex-works delivery.

BKI PIPE HANGERS FOR EN10255 STEEL TUBE

Hanger Clip Thread Max. Max. Clip Dim EN1057 R250 BSSreference ID with working working material ‘A’ Copper tube code

rubber load load at width x Table ‘X’mm N 20dB (A) N thickness mm mm OD mm

*BKI 6 x 12 12.0 M6 1500 400 12 x 1.5 40 12 19019729*BKI 6 x 15 15.0 M6 1500 400 12 x 1.5 40 15 19019740BKI 6 x 22 22.0 M6 1500 400 12 x 1.5 40 22 19019751BKI 6 x 28 28.0 M6 1500 400 12 x 1.5 40 28 19019762BKI 6 x 35 35.0 M6 1500 400 12 x 1.5 40 35 19019773BKI 6 x 42 42.0 M6 1500 400 12 x 1.5 40 42 19019784BKI 6 x 54 54.0 M6 1500 400 12 x 1.5 40 54 19019795

* These hangers have no joggle.Other sizes available ex-works delivery.

BKI PIPE HANGERS FOR EN1057 R250 COPPER TUBE TABLE ‘X’


1.19

BOSS Flamco BSA Rubber Lined Clipsfor steel and copper tube (BBA approved)

Features• Temperatureresistant from -40°C to +110°C

• Noise damping 18dB (A) to DIN 52218

• Available M8 orM8/M10 (pleasespecify at time ofordering)

• Spring activatedassembly


• Clip electrolyticallyzinc-plated

Clip Clip No. of Thread Max. Clip EN1057 R250 EN10255 BSSreference ID fast- std. combi working material Copper tube Steel tube code

mm ening load at width x Table ‘X’ NB Approxscrews 18dB thickness OD

(A) mm mm OD mm inch mm

BSA x 14/16 14-16 1 M8 M8/M10 600 25 x 1.75 15 - - 19055007BSA x 20/24 20-24 1 M8 M8/M10 600 25 x 1.75 22 1/2 21.3 19055018BSA x 25/28 25-28 1 M8 M8/M10 600 25 x 1.75 28 3/4 26.9 19055029BSA x 33/37 33-37 1 M8 M8/M10 600 25 x 1.75 35 1 33.7 19055040BSA x 38/42 38-42 1 M8 M8/M10 600 25 x 1.75 42 11/4 42.4 19055051BSA x 45/49 45-49 1 M8 M8/M10 600 25 x 1.75 - 11/2 48.3 19055062BSA x 50/54 50-54 1 M8 M8/M10 600 25 x 1.75 54 - - 19055073BSA x 56/60 56-60 1 M8 M8/M10 600 25 x 1.75 - 2 60.3 19055084


Typical examples of ceiling andwall mounted applications

• The clip is for horizontal or vertical wallmounting use, for all types of pipe.

• Single screw design and comes complete withnoise suppression strip. Allows the pipe to befitted close to a wall or ceiling.


1.20

BOSS Flamco BSA Rubber Lined Clips for steel and copper tube (BBA approved)

Features• Temperatureresistant from -40°C to +110°C

• Noise damping 18dB (A) to DIN 52218

• Available in M8 or M8/M10(please specify attime of ordering)

• Spring activatedassembly



•The clip is for horizontal or vertical wallmounting use, for all types of pipe.

• Two screw design and comes complete withnoise suppression strip. Allows the pipe to befitted close to a wall or ceiling.

Clip Clip No. of Thread Max. Clip EN1057 R250 EN10255 BSSreference ID fast- std. combi working material Copper tube Steel tube code

mm ening load at width x Table ‘X’ NB Approxscrews 180dB thickness OD

(A0 mm mm OD mm inch mm

BSA x 68/73 68-73 2 M8 M8/M10 1200 25 x 2.75 67 - - 19055095

BSA x 75/80 75-80 2 M8 M8/M10 1200 25 x 2.75 76 21/2 76.1 19055103

BSA x 89/91 89-91 2 M8 M8/M10 1200 25 x 2.75 - 3 88.9 19055114

BSA x 108/116 108-116 2 M10 - 1200 25 x 2.75 108 4 114.3 19021804

BSA x 133/141 133-141 2 M10 - 1200 25 x 2.75 133 5 139.7 19021815

BSA x 165/168 165-168 2 M10 - 1200 25 x 2.75 159 6 165.1 19021826


Typical examples of ceiling and wall mounted applications


1.21

Clip EN10255 Thread Max Strip BSSreference Steel tube working dimensions code

NB load in N mminch

BSA-G 20-24 1/2 M8/M10 1000 25 x 1.75 19055210BSA-G 25-28 3/4 M8/M10 1000 25 x 1.75 19055221BSA-G 33-37 1 M8/M10 1000 25 x 1.75 19055232BSA-G 38-42 11/4 M8/M10 1000 25 x 1.75 19055243BSA-G 44.5-49 11/2 M8/M10 1000 25 x 1.75 19055254BSA-G 56-60 2 M8/M10 2000 25 x 2.75 19055265BSA-G 75-80 21/2 M8/M10 2000 25 x 2.75 19055276BSA-G 89-91 3 M8/M10 2000 25 x 2.75 19055287BSA-G 108-116 4 M8/M10 2000 25 x 2.75 19055298

BOSS Flamco BSA-G Rubber Lined Clips for imperial plastic tube

•For horizontal and verticalwall mounting.

• For ceiling mounting.•BSA-G clips: special forplastic tube.

Features• The smooth rubberstrip incorporatesnoise-suppressionqualities and allowsthe plastic tube toexpand in the clip

• The plastic spacingwasher preventsovertightening ofthe clip

• Quick closingmechanism makespre-mountingwithout toolspossible

• Special M8/M10combination nut

Construction and Coating• Smooth rubber strip

• Plastic spacingwasher


• Quick closingmechanism


1.22

BOSS Flamco BSB Rubber Lined Clips for steel and copper tube

FeaturesRubber Lining:

• 1/2" temperatureresistant from -40°C to +110°C

• Noise damping 18 dB (A) to DIN 52218

• Available in eitherM10 or M8connection (pleasespecify at time ofordering)

Construction and Coating • Undivided clip

• Noise suppressionrubber strip


•The clip is for horizontal or vertical wallmounting use, for all types of pipe.

• Single screw design and comescomplete with noise suppression strip.

•Allows the pipe to be fitted close to a wall or ceiling.

Clip Clip No. of Max. Clip EN1057 EN10255 BSSreference ID fast- working material R250 Steel tube code

mm ening load at width x Copper tubescrews 18dB thickness Table ‘X’ NB Approx

(A) N mm OD mm inch OD mm

M8 ThreadBSB 8 x 15 14-16 1 40 18 x 1 15 - - 19022507BSB 8 x 3/8" 17-20 1 40 18 x 1 - 3/8 17.2 19022518BSB 8 x 1/2" 21-24 1 60 18 x 1 22 1/2 21.3 19022529BSB 8 x 3/4" 26-29 1 80 18 x 1 28 3/4 26.9 19022540BSB 8 x 1" 33-36 1 120 18 x 1 35 1 33.7 19022551BSB 8 x 11/4" 41-44 1 160 18 x 1 42 11/4 42.4 19022562BSB 8 x 11/2" 47-50 1 200 18 x 1 - 11/2 48.3 19022573BSB 8 x 54 54 1 200 18 x 1 54 - - 19022584BSB 8 x 2" 60-62 1 300 18 x 1 - 2 60.3 19022595M10 ThreadBSB 10 x 15 14-16 1 40 18 x 1 15 - - 19022603BSB 10 x 1/2" 17-20 1 40 18 x 1 - 1/2 17.2 19022614BSB 10 x 3/4" 21-24 1 60 18 x 1 22 3/4 21.3 19022625BSB 10 x 1" 26-29 1 80 18 x 1 28 1 26.9 19022636BSB 10 x 11/4" 33-36 1 120 18 x 1 35 11/4 33.7 19022647BSB 10 x 11/2" 41-44 1 160 18 x 1 42 11/2 42.4 19022658BSB 10 x 54 54 1 200 18 x 1 54 - - 19022669BSB 10 x 2" 60-62 1 300 18 x 1 - 2 60.3 19022680

Typical examples of ceiling andwall mounted applications


1.23

BOSS Flamco BSI Rubber Lined Clips

Clip ref./ EN10255 Thread Max. Max. Strip BSSExt. dia. Steel tube working working load* dimensions code

of pipe from NB load 16dB(A)– to mm inch M8/10 M10/12 N in N mm

BSI 15-19 3/8 M8/10 - 1000 250 20 x 1.5 19022691

BSI 20-25 1/2 M8/10 - 1000 300 20 x 1.5 19022710

BSI 26-30 3/4 M8/10 - 1000 350 20 x 1.5 19022721

BSI 32-36 1 M8/10 - 1000 400 20 x 1.5 19022732

BSI 38-43 11/4 M8/10 - 1000 400 20 x 1.5 19022743

BSI 44-49 11/2 M8/10 - 1000 450 20 x 1.5 19022754

BSI 50-55 - M8/10 - 1000 450 20 x 1.5 19022765

BSI 56-61 2 M8/10 - 1000 500 20 x 1.5 19022776

BSI 62-67 - M8/10 - 3000 500 20 x 2.0 19022787

BSI 75-80 21/2 M8/10 - 3000 550 20 x 2.0 19022798

BSI 87-92 3 M8/10 - 3000 600 20 x 2.0 19022806

BSI 108-116 4 M8/10 - 2150 700 20 x 2.0 19022872

BSI 108-116 4 M8/10 M10/12 2150 700 20 x 2.0 19022817

BSI 131-141 5 - M10/12 2150 800 20 x 2.0 19022839

BSI 159-163 - - M10/12 2150 1000 20 x 2.0 19022850

BSI 165-169 6 - M10/12 2150 1150 20 x 2.0 19022861

Features• Fitted with a sound suppressingrubber lining

• Reinforcementgrooves ensurethat BSI clipsmaintain theirshape

• Ideal for confinedspaces; fixing bolt features screw-cross-head

• Fitted with twobolts with anti-loss ring

* To achieve a good sound suppression do not overload the fitting.


1.24

Clip ref./ EN10255 Thread Max. Max. Strip BSSExt. dia. Steel tube working working load* dimensions code

of pipe from NB load 15dB(A)– to mm inch N in N mm

BSH 15-18 3/8 M8/10 1000 250 20 x 1.5 19061016

BSH 19-22 1/2 M8/10 1000 300 20 x 1.5 19061027

BSH 27-30 3/8 M8/10 1000 400 20 x 1.5 19061038

BSH 32-35 - M8/10 1000 400 20 x 1.5 19061049

BSH 40-44 11/4 M8/10 1000 450 20 x 1.5 19061060

BSH 48-52 11/2 M8/10 1000 500 20 x 1.5 19061071

BSH 53-58 - M8/10 1000 500 20 x 1.5 19061082

BSH 60-65 2 M8/10 1000 500 20 x 1.5 19061093

BSH 75-80 21/2 M8/10 1000 500 20 x 1.5 19061101

BSH 87-92 3 M8/10 1000 500 20 x 1.5 19061112

BSH 108-116 4 M8/10 1000 500 20 x 1.5 19061123

Features• One-piece clipwith quick closingmechanism

• Lightweightconstruction withgood load bearingcharacteristics

• Fitted with asound suppressingrubber lining

• Reinforcementgrooves ensurethat BSH clipsmaintain theirshape

• Ideal for confined spaces

* To achieve a good sound suppression do not overload the fitting.

•A lightweight clip designed for close mountingsteel pipes to the wall or ceiling.

BOSS Flamco BSH Rubber Lined Clips


1.25

Koolphen™ Phenolic Support Insulation Blocksto suit Steel Tube•Standard blocks available for EN10255 steel tube - NB 1/2" to 6".•Chilled water installations.•Hot water services (Temp limit +120°C).•Mains cold water.

EN10255 Block Metal Thickness of insulation/BSS codeSteel tube length spreaderNB mm plate 15 20 25 30 32 40 50inch swg mm mm mm mm mm mm mm1/2 100 - 19042884 19043403 19043008 19049780 19050008 19050403 190509053/4 100 - 19042895 19043414 19043019 19049791 19050019 19050414 190509161 100 - 19042903 19043425 19043030 19049810 19050030 19050425 1905092711/4 100 - 19042914 19043436 19043041 19049821 19050041 19050436 19050938*11/2 100 20 19042925 19043447 19043052 19049832 19050052 19050447 19050949*2 100 20 19042936 19043458 19043063 19049843 19050063 19050458 19050960*21/2 100 20 - 19043469 19043074 19049854 19050074 19050469 19050971*3 100 20 - 19043480 19043085 19049865 19050085 19050480 19050982*4 100 20 - 19043491 19043096 19049876 19050096 19050491 19050993*5 100 20 - 19043510 19043104 19049887 - 19050510 19051010*6 125 16 - 19043521 19043115 19049898 - 19050521 19051021

Typical installation

Features• CFC Free

• Block cut toaccurate standardlengths andthicknesses

• Self adhesive sealensures vapourbarrier ismaintained

• Class ‘O’ foil vapour barrier

• Lightweight,therefore easy tohandle and fit

TemperatureRange• Koolphen blocks: -180°C to +120°C

Construction and Coating• Bore coated• High densityphenolic foam(KOOLPHEN)

• Spreader platesare available to suit

Note: Other lengths and thicknesses available ex-works.Full range of brackets to suit Koolphen blocks available ex-stock.

* Spreader plate supplied as standard on bottom half of block.


1.26

Koolphen™ Phenolic Support Insulation Blocksto suit Copper Tube•Standard blocks available for EN1057 R250 copper tube - OD 15mm to 159mm.•Chilled water installations.•Hot water services (Temp limit +120°C).•Mains cold water.

EN1057 Block Metal Thickness of insulation/BSS codeR250 length spreader

Copper tube mm plate 15 20 25 30 40 50NB mm swg mm mm mm mm mm mm

15 100 - 19043126 19043606 19043200 19050192 19050587 1905108722 100 - 19051512 19043617 19043211 19050200 19050598 1905109828 100 - 19051523 19043628 19043222 19050211 19050606 1905110635 100 - 19051534 19043639 19043233 19050222 19050617 1905111742 100 20 19051545 19043650 19043244 19050233 19050628 1905112854 100 20 19051556 19043661 19043255 19050244 19050639 1905113967 100 20 19051567 19043672 19043266 19050255 19050650 1905115076 100 20 19051578 19043683 19043277 19050266 19050661 19051161108 100 20 19051589 19043702 19043299 19050277 19050672 19051172133 100 20 19051608 19043713 19043307 19050288 19050683 19051183159 125 16 19051619 19043724 19043318 19050299 19050694 19051194

Typical installation.

Features• CFC Free

• Block cut toaccurate standardlengths andthicknesses

• Self adhesive sealensures vapourbarrier ismaintained

• Class ‘O’ foil vapourbarrier

• Lightweight,therefore easy tohandle and fit

TemperatureRange• Koolphen blocks: -180°C to +120°C

Construction and Coating• Bore coated• High densityphenolic foam(KOOLPHEN)


Note: Other lengths and thicknesses available ex-works.Full range of brackets to suit Koolphen blocks available ex-stock.


1.27

Woodblock Pipe Support Blocks

Applications• Chilled water• Mains cold water• L.T.H.Wtemperature -20°Cto +100°C

Construction and Coating• Can be suppliedwith bracket

• Manufactured intwo halves fromkiln driedhardwood


EN10255 Woodblock Thickness of Woodblock/BSS codeSteel tube length

NB mm 25 30 40 50inch mm mm mm mm1/2 100 19153003 19153132 19153250 191533683/4 100 19153014 19153143 19153261 191533791 100 19153025 19153154 19153272 1915339011/4 100 19153036 19153165 19153283 1915340911/2 100 19153047 19153176 19153294 191534202 100 19153058 19153187 19153302 1915343121/2 100 19153069 19153198 19153313 191534423 100 19153080 19153206 19153324 191534534 100 19153091 19153217 19153335 191534645 100 19153110 19153228 19153346 191534756 125 19153121 19153239 19153357 19153486


1.28

Calcium Silicate Pipe Support Blocks


Applications• Available for EN10255steel tube NB 1/2" to 6"and EN1057 R250table x copper tube

• L.T.H.W, M.T.H.W,H.T.H.W.

• Steam lines

• Condensate lines

Construction• VICULAD nominaldensity 430 kgm3

• Thermal conductivity 0.09 W/mk @ 20°C

• Complies with class O requirements

• Class 1 to RS 476:part7:1971

• Non-combustible whentested to BS 476:part 4:1970

Temperature Range• 0°C to 600°C

Note:

• All calcium silicatepipe support blockssupplied ex-works

• Full range ofoversized pipebrackets to suitblocks O.D. availableex-works

• Spreader platesavailable to suit


1.29

Cap reference Suitable for Dimensions BSSthreaded rod diameter code

A B Cmm mm

T6 M6 30.5 15 19011008

T8 M8 37.5 21 19011019

T12 M12 57 30 19011030

Features • To be used withall BK hangers to ensure adripwater-proofand dust-proofassembly

• Also aninstallation aidwhen fitting a BK pipe hanger

• Maximumtemperature 70°C

Material and Colour• Soft PVC, black


BOSS Flamco T-caps for BK, BKI and BKK Pipe Hangers(BBA Approved)


1.30

Extension Upper For Length Min. Max. BSSreference BK threaded A D H working code

hanger rod mm mm mm load D N

BO 6 Steel BK6 M6 37 H-60 120 1150 19012800BO 8 Steel BK8 M8 35 H-80 155 1850 19012811BO 12 Steel BK12 M12 56 H-115 230 3750 19012822BOK 6 Copper BKK6 M6 37 H-60 120 480 19012907BOK 8 Copper BKK8 M8 35 H-80 155 750 19012918Note: To reduce to smaller size rod use KSM 2 with BO 12

KSM 3 with BO 8/BOK 8

BOSS Flamco BO and BOK Extension PiecesBO steel (BBA Approved) and BOK copper

Features• For hanging pipesbelow each other,whilst at the sametime retainingflexibility

Construction and Coatings• BO electrolyticallyzinc-plated

• BOK extensionpiece copper


• Nutselectrolyticallyzinc-plated

Note: Always selectextension pieces for the upper BK hanger.

Typical installation usingan extension piece.

Extension piecedimensions


1.31

BOSS Flamco SR Sound Suppressing Strips

Ref. Clip/Rail DimensionsShore Coil mm Weight BSS

Type Dim. Quality Hardness Length g/cm3 codemm m B H D

SR1 BK 6 12 x 1.55 LR 155/1 55º 20 16.5 7.2 3.9 1.29 19019515

SR1 BM 10 12 x 1.55 LR 155/2 55º 20 16.5 7.2 3.9 1.29 19019515

SR2 BK 8 16 x 1.95 LR 155/1 55º 20 20.5 10.5 6.3 1.29 19019526

SR2 BM 12 16 x 1.95 LR 155/2 55º 20 20.5 10.5 6.3 1.29 19019526

SR3 BK 12 25 x 2.75 LR 155/1 55º 20 31.5 12 6.3 1.29 19019537

SR4 R0, R1 - LR 144/2 44º 20 30 16.5 7 1.32 19019548

R2, R3,

R4, R6

Features• At normalfrequency andpressure range,noise suppression20dB (A)

• Temperature-resistant from -40°C to +110°C

• Electrical values:Specificresistance: 2 x109M ohm cm2

Surface resistance:2 x 109M ohm

Note: When noisesuppression strip isused the insidediameter of theassociated clip mustbe greater than theoutside diameter ofthe pipe to be fitted.

Material• RubberSBR/EPDM

•SR lining for Flamco clips SR1, 2 & 3 and Flamco Rail SR4

SR4SR1, 2, 3


1.32

Backplate Thread Dimensions Slotted hole BSSreference A B H code

mm mm mm

GP 8-80 x 30 M8 54 30 80 9 x 14 19053206GP 8/10-80 x 30 M8/M10 54 30 80 9 x 14 19053132GP 12-80 x 30 M12 54 30 80 9 x 14 19053217GP 1/2-120 x 40 1/2" 85 40 120 11 x 14 19053228

BOSS Flamco GP Backplates


GP backplates are used in conjunction withthreaded rod or tube cut to length and threaded.


1.33

Reference Thread Woodscrew Dimensions Woodscrew BSSA fastening D E F fastening codemm mm mm mm

BMD 8 x 50 50 M8 dia. 8 76 26 40 - 19015806BMD 8 x 70 70 M8 dia. 8 96 26 40 1" 19015817BMD 8 x 90 90 M8 dia. 8 116 26 40 2" 19015828

BOSS Flamco BMD Backplate Assemblies

Features• Rigid pipeinstallation due tofixed centres

• BMD suppliedcomplete withwoodscrew,washer and plasticplug

Coating• Backplateassemblyelectrolyticallyzinc-plated

• Woodscrewselectrolyticallyzinc-plated

• Washerselectrolyticallyzinc-plated

Note: The followingFlamco wall clipscan be used incombination withthe Flamcobackplateassemblies BMD.

For use with two wall clips.

BM up to BM8 x 1 su

BMK up to BMK8 x35 su

BSA8

Typical installations using BMD backplate assemblies.

BMD with BSA Clips BMD with BM Clips


1.34

Reference Thread Woodscrew Dimensions BSA 8 BSSA fastening D E F up to codemm mm mm mm

BME 8 x 50/90 50-90 M8 dia. 8 72-112 25 29 2" 19015850

BOSS Flamco BME AdjustableBackplate Assemblies

Features• Any desired pipespacing between50 and 90mmcan be used

• Even if the drilledhole was widened,the wall clips canbe fixed exactly inthe plannedposition

• Fixed distancefrom pipe to wall

• Distance betweenthe pipes can beread off thebackplateassembly

Coating • Backplateassemblyelectrolyticallyzinc-plated

Note: The followingFlamco wall clipscan be used incombination withthe Flamcobackplateassemblies BME -BSA 8, BSF 8, BSB8 or BSA 8/10.

For use with two wall clips.

Not supplied with woodscrew,washer or plastic plug.


1.35

Ball hanger Thread Length mm Max. BSSreference D1 D2 L2 - L3 L1 working code

loadN

K 6 x 6 M6F M6F 7 - 30 58 1500 19012032K 8 x 8 M8F M8F 8 - 30 65 2500 19012043K 12 x 12 M12F M12F 15 - 53 96 5000 19012054K 10 x 6 M10M M6F 7 - 30 72 1500 19012010K 10 x 8 M10M M8F 8 - 30 73 2500 19012021K 10 x 10 M10M M10F 8 - 30 72 2500 19012065

Ball hanger Thread Length mm Max. BSSreference D1 D2 L2 L1 H working code

loadN

KK 8 x 8 M8M M8F 7 39 29 2500 19053900KK 10 x 10 M10M M10F 7 42 30.5 2500 19053911

BOSS Flamco K and KKBall Hangers

Features• Max. swing of the ball element 2 x 20°

• Vertically adjustedby turning lowestpart of the ballhanger

• Inspection hole for checkingposition of rodinside the hanger

Coating• Electrolytically zinc-plated

Type K Ball Hangers

Type KK Ball Hangers


Note: L2 Minimum distance rod must be screwed into hanger.L3 Maximum distance rod must be screwed into hanger.Rod must not be screwed in so far as to stop ball movement.

IMPORTANTLocknut mustbe fitted asshown on anyinstallation.


1.36

Bracket Thread Dimensions Max. BSSreference A B C D working code

mm mm mm loadN

GK 50 x 6 M6 55 24 11 500 19054101GK 50 x 8 M8 55 24 11 500 19054112

Bracket Thread Dimensions Max. BSSreference D1 D2 Tube A B C Back Slotted working code

mm mm mm Plate hole loadN

GK 150 x 8-10 M8 M10 10x35x20 120 80 35 112x40 11x22 1500 19054123GK 150 x 10-12 M8 M10 10x35x20 120 80 35 112x40 11x22 1500 19054134

BOSS Flamco GK Expansion Units

FeaturesGK50

• Fits in Flamco rail R1, R2, R4 and R6

• Maximum axialmovementdepends on rail length

GK150• Standard axialmovement

• Slotted holes inbackplate foraccurateadjustment

• Available withdifferent threadconnections (asshown opposite)

Construction and CoatingGK50• Sliding block nylon PA6

• Thread connectionbrass

GK150

• Backplate andtube ST37electrolytically zinc-plated

• Carriage holdernylon PA6

• Plate stop plastic

GK50

GK150


1.37

Bracket Dimensions Max. BSSreference Tube A B C D Back Slotted working code

mm mm mm mm Plate hole loadN

GK 750 245x40x40 200 110 89 13 150x50 13x26 7500 19054145

Bracket Thread Dimensions Max. BSSreference A B C D E Slotted working code

mm mm mm mm hole loadN

GK 500 x 6 M6 220 195 50 45 11x22 5000 19014601GK 500 x 8 M8 220 195 50 45 11x22 5000 19014612GK 500 x 10 M10 220 195 50 45 11x22 5000 19014623GK 500 x 12 M12 220 195 50 45 11x22 5000 19014634

FeaturesGK500• Maximum axialmovement 90mm

• Pressure platecompletelyenclosed in sliding block

• Slotted holes for accurateadjustment

GK750• Slotted holes inbackplate foraccurateadjustment

Construction and CoatingGK500• Carriage holderand pressure plate ST37electrolyticallyzinc-plated

• Sliding block nylon PA6

GK750

• Bracket and tube ST37electrolyticallyzinc-plated

• Carriage holdernylon PA6

• Plate stop plastic

BOSS Flamco GK Expansion Units

GK500

GK750


1.38

Reference Thread Dimensions Max. BSSA B C D E F working code

mm mm mm mm mm loadN

DA6 M6 dia. 40 x 30 dia 8.5 32 55 - 500 19018203DA8 M8 dia. 40 x 30 dia 8.5 32 55 - 500 19018214DA12 M12 dia. 50 x 40 M12 - 99 20 2000 19018225

BOSS Flamco DA Noise Suppression Units

Features• Noise suppression20 dB(A)

• Temperature-resistant from -40°C to +110°C

• Hardness: 65-70°Shore A

Construction and Coating• Housingelectrolyticallyzinc-plated

• Suppressor unit:DA6 and DA8 -EPDMDA12 naturalrubber

Typicalinstallationshows howeasy it is to fitthe DA fixture.


1.39

Apache Pipe Hanger Clamps•For metric pipes from 15mm to 171mm ODand imperial pipes from 1/2" to 6" bore.

•Dual bossing15-96mmM8+M1096-171mmM10+M12

Min/Max Imperial Dimensions Dual SWL BSSOD bore size H1 H2 W D boss Kgf codemm mm mm mm mm

15-18 20 45 30 25 M8/M10 13 78710006

19-22 1/2" 20 50 35 25 M8/M10 17 78710017

23-27 3/4" 20 55 40 25 M8/M10 23 78710028

27-31 22 60 45 25 M8/M10 23 78710039

32-35 1" 22 65 45 28 M8/M10 31 78710050

36-44 11/4" 23 70 55 28 M8/M10 31 78710061

44-52.5 11/2" 23 75 65 28 M8/M10 40 78710072

52.5-58 23 85 70 28 M8/M10 47 78710083

58-69 2" 25 90 80 28 M8/M10 47 78710094

69-81 21/2" 25 105 90 30 M8/M10 59 78710102

81-96 3" 28 120 105 30 M8/M10 71 78710113

96-108 30 140 120 30 M10/M12 73 78710124

108-122 4" 30 150 135 30 M10/M12 73 78710135

122-138 28 165 155 40 M10/M12 73 78710146

138-145 5" 32 175 155 40 M10/M12 90 78710157

145-171 6" 35 215 185 40 M10/M12 91 78710168

Features• Ratchet designenables eachclamp toaccommodate arange of pipe sizes

• Fits any standardor non-standardpipe

• No loosecomponents,captive overstrapsecures pipe

• Very rapidinstallation

• Robust designmade from toughblack polyamide

• Continuous safeworkingtemperature up to 82°C

• Good chemicalresistance (applyfor further details)

• High safety factor,recommended safeworking load lessthan 10% offailure load


1.40

Min/Max Imperial Dimensions Dual SWL BSS OD bore size H1 H2 W D boss Kgf codemm mm mm mm mm

15-18 34 73 11.5 30 2 5 13 78710305

19-22 1/2" 34 77 11.5 35 25 17 78710316

23-27 3/4" 34 80 11.5 40 25 23 78710327

27-31 34 85 11.5 45 25 23 78710338

32-35 1" 34 90 14 45 28 31 78710349

36-44 11/4" 34 95 14 55 28 31 78710360

44-52.5 11/2" 34 105 14 65 28 40 78710371

52.5-58 34 115 14 70 28 47 78710382

58-69 2" 34 120 14 80 2 8 47 78710393

69-81 21/2" 34 130 14 90 30 59 78710401

81-96 3" 34 145 14 105 30 71 78710412

96-108 34 160 17 120 30 73 78710423

108-122 4" 34 170 17 135 30 73 78710434

122-138 34 190 17 155 40 73 78710445

138-145 5" 34 200 17 155 40 90 78710456

145-171 6" 34 225 17 185 40 91 78710467

Apache Framing Channel Pipe Clamps•For metric pipes from 15mm to 171mm ODand imperial pipes from 1/2" to 6" bore.

•Simple twist fit.

• Fits standard 41x41 and 41x21 channel.

Features• Ratchet designenables eachclamp toaccommodate arange of pipe sizes

• Fits any standardor non-standardpipe

• No loosecomponents,captive overstrapsecures pipe

• Very rapidinstallation

• Robust designmade from toughblack polyamide

• Continuous safeworkingtemperature up to 82°C

• Good chemicalresistance (applyfor further details)

• High safety factor,recommended safeworking load lessthan 10% offailure load


1.41

Apache TwisterQuick-fit connection forThreaded Rod to Channel.

Rod size Dimensions BSSmm H W D code

mm mm mm

10 16.5 58 40 78710478

Features• Quick and simple to fit

• Replacestraditional channel nutassembly

• Fits 41 x 41 and41 x 21 channel

• Accepts M10threaded rod

• Robust design foruse with ApachePipe HangerClamps

twister

POSITION TWIST LOCK


1.42

Pipe ClipsTo suit 15, 22 and28mm copper pipe.Manufactured in whitepolypropylene.

Product description Fig No. Pack BSSsize code

Single Open Pipe Clip for 15mm Pipe 330R 100 00200118



Double Open Pipe Clip for 15mm Pipe 332R 100 00200151

Double Open Pipe Clip for 22mm Pipe 332R 100 00200162

Single Hinged Pipe Clip for 15mm Pipe 340R 100 00200203



Double Hinged Pipe Clip for 15mm Pipe 342R 50 00200236



Stand Off Spacer for 15mm 330R 335R 100 00200269



Standard Nail Clip for 10/12mm Pipe 320R 100 00200077

Standard Nail Clip for 15mm Pipe 320R 100 00200088

Standard Nail Clip for 22mm Pipe 320R 100 00200099

FeaturesOpen Pipe ClipsStiffened external ribsfor added retention.

Hinged Pipe ClipsSpecial hinge toreduce the risk ofstress cracking.Single clips can beassembled together.

Stand off Spacer22mm stand off forpipe installation.

Standard Nail ClipsRobust c/w highquality nail.

Open Pipe Clips (Single and Double) Stand Off Spacer

Hinged Pipe Clips (Single and Double) Standard Nail Clip


1.43

Pipe CoversA neat solution tocovering 15 or 22mmcopper pipes.Manufactured inwhite polypropylene.

Product description EPN Pack BSSsize code

Cover to suit 2 x 15mm pipes (76mm x 34mm) PC15/2500 10x2.5m 00200310

Cover to suit 2 x 22mm pipes (93mm x 41mm) PC22/2500 10x2.5m 00200321

Pipe Cover Bracket for 9 - PC15 pipe cover 9-PB15W 100 00200343

Pipe Cover Bracket for 9 - PC22 pipe cover 9-PB22W 100 00200354

FeaturesCover2.5m lengths held inplace by clippingdirectly onto doublehinged clips or topipe cover brackets.

Pipe Cover BracketFix in place usingscrews, open clips ornail clips.

Pipe Cover

Pipe Cover Bracket


1.44

EN10255 Tapping BSS codeSteel tubeNB inch Black 222RM Galvanised 222RMG

1/2 M10 13475008 134752003/4 M10 13475019 134752111 M10 13475030 1347522211/4 M10 13475041 1347523311/2 M10 13475052 134752442 M10 13475063 1347525521/2 M12 13475074 134752663 M12 13475085 134752774 M12 13475085 13475288

Standard Finish Self Colour or Galvanised

Munsen Ring Single (Malleable Iron)

Munsen Rings

EN10255 Tapping BSS codeSteel tubeNB inch Black 222RM Galvanised 222RMG

1/2 M10 13475938 134761063/4 M10 13475949 134761171 M10 13475960 1347612811/4 M10 13475971 1347613911/2 M10 13475982 134761502 M10 13475993 1347616121/2 M12 13476010 -


Munsen Ring Double (Malleable Iron)

EN1057 R250 Tapping BSS codeCopper tubeOD mm 499SM

15 M10 2401523022 M10 2401524128 M10 2401525235 M10 2401526342 M10 2401527454 M10 2401528567 M12 24015296


Munsen Ring Single (Cast Brass)

Tapping

Tapping

Tapping


1.45

Munsen Rings

EN1057 R250 Tapping BSS codeCopper tubeOD mm 500SM

15 M10 2401601822 M10 2401602928 M10 2401604035 M10 24016051


Munsen Ring Double (Cast Brass)

EN10255 Hole dia. BSS codeSteel tubeNB inch Black 238R Galvanised 239RG

1/2 6.5 13472131 134752863/4 6.5 13472142 134752971 6.5 13472153 13475305

11/4 6.5 13472164 1347531611/2 6.5 13472186 134753272 6.5 13472197 13475338

21/2 6.5 13472205 13475349Standard Finish Self Colour or Galvanised

EN1057 R250 Hole dia. BSS codeCopper tubeOD mm 498S

15 5 2401492222 5 2401493328 5 2401494435 5 2401495542 5 2401496654 5 2401497767 5 24014988


Screw To Wall (Cast Brass)

Tapping

Hole Dia.

Hole Dia.

Screw To Wall (Malleable Iron)


1.46

Backplates

Press Clips (Brass)

Female Malleable Iron

EN1057 R250 Hole dia. BSS codeCopper tubeOD mm 497S

15 5 2401640222 5 2401641328 5 2401642435 5 2401643542 5 24016446


Tapping BSS codeBlack 220RM Galvanised 220RMG

M10 13475307 13475362M12 13475318 13475373


Female and Male Back Plate (Brass) Finish Tapping BSS code

Female Male

Brass M10 496SM 24037202 495SM 24037213

Chrome Plated Brass M10 496SMCP 24037235 495SMCP 24014612

Hole Dia.

Female Male


1.47

EN10255 Steel tube Hole dia. Material BSSNB inch OD mm A code

1/2 15 60 8 25 x 3 191107003/4 20 71 8 25 x 3 191107111 25 74 8 25 x 3 1911072211/4 32 94 12 30 x 3 1911073311/2 40 104 12 30 x 3 191107442 50 114 12 30 x 3 1911075521/2 65 130 12 30 x 3 191107663 80 153 14 40 x 3 191107774 100 178 14 40 x 3 191107886 150 244 14 40 x 5 19110799

Heavy and Larger Saddles on request

Saddle Anchor (Light series for steel pipe) figure 102• StandardFinish RedOxide

EN10255 Steel tube Material Bolt size BSSNB inch OD mm B code

1/2 15 59 25 x 3 M6 x 25 191098413/4 20 65 25 x 3 M6 x 25 191098521 25 72 25 x 3 M6 x 25 1910986311/4 32 92 30 x 3 M10 x 30 1910987411/2 40 98 30 x 3 M10 x 30 191098852 50 110 30 x 3 M10 x 30 1910989621/2 65 126 30 x 3 M10 x 30 191100723 80 149 40 x 3 M10 x 30 191100834 100 174 40 x 3 M12 x 40 191100945 125 210 40 x 5 M12 x 40 191101026 150 235 40 x 5 M12 x 40 191101137 175 275 50 x 6 M16 x 50 191101248 200 300 50 x 6 M16 x 50 191101359 225 325 50 x 6 M16 x 50 1911014610 250 350 50 x 6 M16 x 50 1911015712 300 400 50 x 6 M16 x 50 19110168

Heavy and Larger Split Band Clips on request

Split Band Clip 2 Bolt (Light series for steel pipe) figure 100• 15mm-50mmStandard FinishZinc Plated

• 65mm-300mmStandard FinishRed Oxide


1.48

EN10255 Material Material Bolt BSSSteel tube A D A B size code

NB inch OD mm1 25 47 95 30 x 3 30 x 5 M10 x 30 1911250111/4 32 55 105 30 x 3 30 x 5 M10 x 30 1911251211/2 40 58 105 30 x 3 30 x 5 M10 x 30 191125232 50 72 116 30 x 3 30 x 5 M10 x 30 1911253421/2 65 80 140 30 x 3 30 x 5 M10 x 30 191125453 80 87 180 40 x 3 40 x 5 M12 x 40 191125564 100 99 180 40 x 3 40 x 5 M12 x 40 191125675 125 130 230 50 x 3 50 x 6 M16 x 50 191125786 150 144 230 50 x 3 50 x 6 M16 x 50 191125898 200 200 380 50 x 6 50 x 8 M16 x 50 1911260810 250 250 430 50 x 6 50 x 10 M20 x 70 1911261912 300 289 490 50 x 6 50 x 10 M20 x 70 19112630

Roller Chair and Guide Assembly (for steel pipe) figure 114• Standard Finish Red Oxide• 15mm to 50mm may differ frompicture reference

• Cast Roller Zinc Plated up to150mm - thereafter self colour

EN10255 Material BSSSteel tube A D code

NB inch OD mm1 25 80 50 30 x 3 1911330011/4 32 97 65 30 x 3 1911331111/2 40 97 65 30 x 3 191133222 50 118 70 30 x 3 1911333321/2 65 136 92 30 x 3 191133443 80 190 130 40 x 3 191133554 100 190 130 40 x 3 191133665 125 250 180 50 x 6 191133776 150 250 180 50 x 6 191133888 200 300 240 60 x 8 1911339910 250 355 292 60 x 8 1911340712 300 410 342 60 x 8 19113418

Single Roller Bracket (for steel pipe) figure 118• Standard Finish Red Oxide• Cast Roller Zinc Plated up to150mm - thereafter self colour


1.49

EN10255 Thread Material Material BSSSteel tube C size A B code

NB inch OD mm1/2 to 1 25 66 M6 25 x 3 25 x 3 1942000111/4 32 72 M10 30 x 3 30 x 3 1942001211/2 40 76 M10 30 x 3 30 x 3 194200232 50 80 M10 30 x 3 30 x 3 1942003421/2 65 105 M10 30 x 3 30 x 3 194200453 80 115 M12 40 x 5 40 x 3 194200564 100 140 M12 40 x 5 40 x 3 194200675 125 160 M16 50 x 6 50 x 6 194200786 150 183 M16 50 x 6 50 x 6 194200898 200 215 M20 50 x 10 50 x 6 1942010810 250 250 M20 50 x 10 50 x 6 1942011912 300 283 M20 50 x 10 50 x 6 19420130

Clevis Hanger – Budgie Swing (for steel pipe) figure 115S • Standard Finish Red Oxide


1.50


Documents

BOSS Flamco Pipe Support System