Embed Size (px)
Citation preview
B.P PODDAR INSTITUTE OF MANAGEMENT AND TECHNOLOGY
List of SPIE chapter events in the year 2015-2016
1. EAPE’15(Emerging Areas of Photonics and Electronics 2015).
2. Seminar on Digital Camera and its General optics.
3. KHET 2k16.
4. Avigyan 2k16(Tech quiz).
5. Seminar on Photonic Devices and VLSI.
6. Solar Project (Education Outreach Program).
7. Attending Workshops and Conference on Recent Trends in Emerging
Technology in Dehradun Institute of Technology (DIT), SPIE chapter.
8. School Awareness Program in Scottish Church Collegiate School,
Kolkata.
9. Attending Student Chapter Leadership Workshop and Optics and
Photonics conference in San Diego, California, USA.
10. Hardware design and implementation competition in B.P Poddar
Institute of Management and Technology.
11. Industrial Tour in SIMOCO Telecommunication South East Asia.
12. Chapter Meetings.
Chapter Budget 2015-2016
1. Previous year allotted grant $1230.00 (EAPE’15 = $1000 and School
Awareness Program = $230) 2. Chapter activity grant received 2015-
2016
$1770.00
Total $ 3000.00
Chapter Expenditure 2015-2016
EVENTS Expenditure
1. EAPE’15 $1350.00
2. Seminar on Digital Camera and
it’s general optics
$140.00
3. KHET 2k16 $150.00
4. Avigyan 2k16 $250.00
5. Seminar on Photonic Device and
VLSI
$230.00
6. School Awareness Program $100.00
7. Hardware Design and
Implementation Competition
$100.00
8. Industrial tour at SIMOCO $460.00
10. Chapter Meetings and Website
maintenance
$100.00
Total $ 2880.00
Carry Forward for next year (2016-2017) = ($3000.00 - $2880.00) = $120.00
October 9-10, 2015
Jointly organized by Department of Electronics and Communication Engineering
B.P. Poddar Institute of Management and Technology Kolkata, India
& S.P.I.E. Student Chapter
B.P. Poddar Institute of Management and Technology Kolkata, India
EAPE (Emerging Areas of Photonics and Electronics) is a conference on opto-electronics and cross disciplinary subjects. It
is a platform for students to publish their research work and show their expertise on certain topics. EAPE is an inter
college student research paper competition where under graduate and post graduate students (except Phd) can
participate and publish their research paper on the basis of selection. This conference is organized by the student
chapter of SPIE of BPPIMT. Some renowned professors and in house lecturers are invited to present their talk.
It was organized on 9th and 10th October, 2015. The inauguration ceremony was started by Principal, Dean Academics
and Head of the department (ECE) on 9th October at 10:00 am. At first students of BPPIMT performed some cultural
program as a part of inauguration ceremony. Then after that session, the main session started at 11:00 am. In first
session Dr. Probal Sengupta (Chief Technology Officer Alumnus Software Pvt. Ltd and Adjunct Professor AKCSIT
(CU)) delivered a speech on Interfacing Techniques In Embedded Systems. It was a 2 hours duration session. In
the next session Dr. Arijit Saha (Associate Prof. Electronics and Communication Engineering B.P Poddar Institute Of
Management And Technology) delivered a lecture on Optical Wireless Communication - An Overview. After that
student paper presentation started where session chair was governed by Dean Academics Prof (Dr.) B.N
Chatterjee. Two students presented their research paper at this session (1.Fabrication of ZnO1-xMnxO thin
films by sol-gel technique for device applications by Prerna Sharma, R.N. Gayen. 2. High Contrast non-
linear Switching in Plasmonic Slot Wave Guide by Sushmita Paul, Mina Ray ). The session ends at 4:30 pm.
On next day 10th October in the first session (from 11:00 am to 1:30pm) Prof.(Dr.) Prabir Kumar Biswas( Head of the
Department Electronics and Communication Engineering, IIT Kharagpur) gave a speech on 3D Imaging Techniques.
The session duration was 2.5 hours. After that the next session started at 2:00 pm, and Dr. Surajit Mandal (Associate
Professor Electronics and Communication Engineering, B.P Poddar Institute Of Management And Technology)
Delivered a speech on Application Of Some Mathematical Transforms in Some Signal and Image Processing.
Then student paper presentation started. In first session the session chair was held by Prof(Dr.) Shila
Ghosh(HOD of ECE dept. of BPPIMT). Three papers was presented in this session (1.Wireless Transmission of
Electricity by Gaurav Paul, Dibyendu Mukherjee, Avinash Chaurasia, Anirban Dutta 2.Vehicle Monitoring &
Emergency Respose System Using Impact Sensors and Accelerometer by Avirup Roy, Avishek Prabir
Chaudhury, Mayukh Sinha, Anurag Chaudhury 3.Review on Electro-Conductive Nature of CNTs and
Buckypaper by Swarnav Mukhopadhyay, Souranu Majhi). At the next session the session chair person was Dr.
Ivy Majumdar. In this session three papers was presented (1.Integration of SWARM Intelligence into Self-
driving cars by Debdyut Hazra 2.Intelligent Traffic Control System by Akash Singh 3.Wireless and Mobile
Networks by Arunava Dhar).The session ended at 5:00 pm by a thanks giving speech by HOD of ECE dept. of
BPPIMT Prof (Dr.) Shila Ghosh and the President of SPIE student chapter of BPPIMT Swarnav
Mukhopadhyay.
The conference was pretty much successful and inspirational to all students.
Poster and Topics of EAPE’15:
Some memorable moments of EAPE’15
Invited Lecturers:
1. Dr. Probal Sengupta (Chief Technology Officer Alumnus Software
Pvt. Ltd and Adjunct Professor AKCSIT (CU).
2. Prof.(Dr.) Prabir Kumar Biswas( Head of the Department Electronics
and Communication Engineering, IIT Kharagpur).
In house lecturers:
1. Dr. Arijit Saha (Associate Prof. Electronics and Communication
Engineering B.P Poddar Institute Of Management And Technology)
2. Dr. Surajit Mandal (Associate Professor Electronics and
Communication Engineering, B.P Poddar Institute Of Management
And Technology)
Members and Faculties of SPIE BPPIMT who organized EAPE’15
3rd February, 2016 S.P.I.E. Student Chapter
B.P. Poddar Institute of Management and Technology Kolkata, India
It was our privilege to have our alumni Mr. Saumik Bhattacharya with us and he
delivered a lecture on “Digital Camera and its General Optics”. He has currently
completed his PhD. in Digital Image Processing, from IIT Kanpur, India. It was an
excellent seminar and the junior students got a clear view of the working principle
of modern digital camera (especially DSLR). And he discussed about his recent
research on fish eye lens and mobile camera and put some light on his patient which
Samsung have bought from him for developing new anti-aliasing algorithm.
Some of the Pictures:
27th February, 2016 S.P.I.E. Student Chapter
B.P. Poddar Institute of Management and Technology Kolkata, India
The annual quiz competition of SPIE BPPIMT student chapter, ABHIGYAN 2k16
(The Tech Quiz) was held on 27.02.2016. It was held in the august presence of
Principal, Dr. Sutapa Mukherjee, Registrar, Dr. Sandip Ghosh, and HOD of ECE
Dr. Shila Ghosh and other faculty members of BPPIMT. The competition had its
prelims before, where out of 100 teams 10 teams had been selected for round II and
from there 6 teams for the final. The quiz competition was held in the seminar hall,
and was presided by Aakash Dey, Amit Singh and Shreya Chatterjee. It contained
several rounds comprising of questions related to general knowledge focusing on
technology. Rounds like identify the logo, know the voice, audio visual round, and
picture quiz round made the participants feel relaxed. While rounds like who am I,
rapid fire, latest tech finder and tech question round was for the final. And it put
some pressure on the finalist. Though it was the most enjoyable round. The quiz
included another interesting and was named KNOW YOUR COLLEGE round.
There were also lots of questions and prizes for the audience. Top three teams were
awarded.
17th-19th March, 2016 S.P.I.E. Student Chapter
B.P. Poddar Institute of Management and Technology Kolkata, India
Khet is a chess-like abstract strategy board game using lasers that was formerly
known as Deflection. Players take turns moving Egyptian theme pieces around
the playing field, firing their low-powered laser diode after each move. Most of
the pieces are mirrored on one or more sides, allowing the players to alter the
path of the laser through the playing field. When a piece is struck by a laser on a
non-mirrored side, it is eliminated from the game. This year the event was also
an inter college event and it was a two day gaming competition. In this year the
number of participants have increased to around 200. There were five rounds
with three different difficulty levels (beginner, moderate, expert). SPIE members
have already made the game famous and the interest is growing day by day. The
finalists were awarded by SPIE students’ chapter of BPPIMT.
7th May, 2016 S.P.I.E. Student Chapter
B.P. Poddar Institute of Management and Technology Kolkata, India
We have arranged this seminar for creating awareness and improving knowledge of
students in Photonic Devices and VLSI technology. We have invited renowned
professors from Calcutta University and Jadavpur University to help students. Prof
Biswanath Roy from Jadavpur University gave a lecture on “Effect of light in
Human life” and discussed about his recent project on illumination. His student
presented a model of his project. And Prof Sushanta Sen gave lecture on “Recent
trends in VLSI technology” and discussed how the development in industry is
dependent on VLSI technology. Also mentioned some critical criterion to design a
good VLSI architecture. Students started question answering session after the
speech is over and they were so much happy to know about these topics.
Honorable guests:
1. Prof Biswanath Roy (Electrical Engineering Dept., Jadavpur University)
2. Prof Sushanta Sen ( Radio physics and Electronics Dept. Calcutta University)
Some Memorable moments:
August, 2015-May, 2016 S.P.I.E. Student Chapter
B.P. Poddar Institute of Management and Technology Kolkata, India
Solar project: We have done a solar project in a village near Domjur, Howrah. We
have provided light in a cemetery, where people suffer due to power cut of several
hours. In emergency situation the villagers become helpless. So we have solved
their issues and now they are really happy with that. Currently we have done on
another project in Sundarban. We are working on a solar project in a primary school
where students of two-three villages comes to study at night. The school teachers
also run an orphanage. We have provided home solar power system to them. And
now they are very much happy with that and their problems have solved. The
children of the village now can study without any trouble and the orphans can live
their life more comfortably. Thanks to SPIE for their support.
This solar project was a very gratifying experience for us. The way SPIE governing
the future of not only science but also society make us feel proud to be a part of it!
The happiness in those innocent eyes was enough to say that we did the job we
were supposed to do.
Some pictures from project work:
Our SPIE Team Members with Orphanage children in Canning, Sundarban
Our SPIE Team Members in Domjur, Howrah
19th -20th December, 2015 S.P.I.E. Student Chapter
B.P. Poddar Institute of Management and Technology Kolkata, India
In December, 2015 our chapter member Supriyo koyal(Joint Secretary) represented
our chapter in a workshop and conference on ‘Recent Trends in Emerging
Technology’ (RTET-2015) organized by SPIE STUDENT CHAPTER AND OSA
CHAPTER, DIT University, Dehradun. Thanks to DIT University SPIE students
Chapter for organizing such a great Workshop and Conference. This helped us a lot
for connecting with new people and create networking, exploring new areas and
fields of science.
7th July, 2016 S.P.I.E. Student Chapter
B.P. Poddar Institute of Management and Technology Kolkata, India
Awareness in education is a serious problem in India. The theoretical knowledge
based education system is literally destroying the quality of education. We are
trying to build a skillful and educated youth as our backbone of our educational
system. We are approaching schools to teach and aware the students of primary and
secondary division. We use our educational outreach kit and to show the basic
properties of light and lasers.
This year we have arranged school awareness program in Scottish Church
Collegiate School. Four members from SPIE student’s chapter arranged a small
workshop for students in the school. They aware them about the importance of light
in our daily life and the light as a source of renewable energy and its applications.
Also they showed some models for practical realization of the theoretical
knowledge. Also, the students got some practical example of the general properties
of light. Almost 150 students attended the program and they were extremely happy
to see that physics does magic perfectly in our life. Thanks to SPIE for their
support.
Some pictures of School Awareness Program:-
27th August-1st September, 2016 S.P.I.E. Student Chapter
B.P. Poddar Institute of Management and Technology Kolkata, India
In this year Swarnav Mukhopadhyay, president of SPIE student chapter BPPIMT
represented our chapter in Optics and Photonics conference. The leadership
workshop was very much helpful for creating leaders in student chapters. Prof. Jean
Luc was awesome and his speech motivated all students and participants present in
the conference room. And other workshops and professional development courses
was also fabulous. It was a great opportunity for students for networking with
others and build their network more and more. The conference was highly inspiring
and motivating event for students who wants to do research work. Thanks to SPIE
for this much of support for enlarging knowledge and experience of students as well
as student chapters for year after year.
Some memorable moments from the conference:-
29th September- 1st October, 2016 S.P.I.E. Student Chapter
B.P. Poddar Institute of Management and Technology Kolkata, India
This competition encourages students to extend their knowledge to a professional
level in electronic circuit design and implementation. It also encourages them to
nurture their creativity and innovation on applied engineering concepts. There were
four students in each group and total numbers of group were 20. Certain project task
were given to each group, among them top five group was chosen for the final
round according to their performances and accuracy. In final round more tough
projects were given to them and three groups were able to complete the project.
And they were awarded as per their problem solving skill, accuracy and way of
approach to problem and speed of completion. Students were very much excited
about this events and they are waiting to perform their best in next year. A large
number of student gathering is a proof of the success of this event.
26th October, 2016 S.P.I.E. Student Chapter
B.P. Poddar Institute of Management and Technology Kolkata, India
An industrial tour was organized by the department of Electronics and
Communication on 26th of October 2016 for undergraduate graduate students. A
total number of 60 students and four faculty members had done the industrial visit
in Simoco Telecommunication, Sector – V, Saltlake City, Kolkata. Mrs Paramita ,
head operation Training and solution introduced the program scheduled to us.
The visit was supervised by Mr. Kamalendu, who showed the production unit
which consists of three sections:
1. Surface Mount Section for fabrication LED bulb
2. Testing Section (Intensity, Power, Efficiency, Color and Temperature of
LED Bulb)
3. Quality Checking Section
SURFACE MOUNT ASSEMBLY Surface-mount technology is a method for constructing electronic circuits in which
the components are mounted directly onto the surface of printed circuit boards
(PCBs). An electronic device so made is called a surface-mount device (SMD). In
the industry it has largely replaced the through-hole technology construction
method of fitting components with wire leads into holes in the circuit board. Both
technologies can be used on the same board for components not suited to surface
mounting such as transformers and heat-sinked power semiconductors.
An SMT component is usually smaller than its through-hole counterpart because it
has either smaller leads or no leads at all. It may have short pins or leads of various
styles, flat contacts, a matrix of solder balls (BGAs), or terminations on the body of
the component.
The SMA (Surface mount assembly) section consists of three additional sections
namely:
SMA Stencil Printer
Students being demonstrated by Mr. Kamlendu of SIMOCO Telecommunication
SMA Pick and Place Machine
Students are being given demonstration of the SMA pick and place machine.
SMA Reflow Oven
SMA Reflow Oven is being demonstrated
The Reflow Oven had five different heating sections embedded inside. The
matrixes of components are slowly passed through all the five sections and they get
mounted on the PCB board. The temperature is gradually increased since the
components may get damaged due to high temperature at once.
SMA SECTION AT A GLANCE
PCB board: where all components are soldered and pasted.
CLC machine (MICRO DEK): here soldering and pasting is done.
CMS 84: It’s a surface mount assembly system. It fixes component in a rill
wise selection fashion. It’s a programmable machine where text program is
done manually.
Bare PCB: its stencil fixing board, it helps in soldering and pasting.
INFRAFLOTM500C TURB AIR: It does final assembly, it checks pre
heating temperature (its generally 1500C). Usable temperature range: 2900C
to5000C.
Hand soldering: Here soldering is done manually. Heat sink is used for this
purpose.
TESTING SECTION
Thereafter manual soldering of secondary component and coils on PCB board are
done in the testing section. It checks all the parameters whether It matches with the
required one. The section comprises of a number of Matrix being tested in the
testing section in SIMOCO Telecommunication. Apart from that the properties of
fabricated LEDs are well tested. The intensity of LED bulb, its power consumption,
heat generation, surge protection, appropriate color (cool white) etc. are well tested
for product quality management.
QUALITY TEST ROOM
In this section all the SIMOCO products’ quality are being tested which were
shown to us by Mrs. Sucheta Panja. Quality of the product for a manufacturing
company is basically the customers’ specification quantity on particular parameter
of these products.
Quality test room, the designed matrix is being displayed
A radio (TM-610 with 128 channels) was shown to us who is mainly used in
wireless communication in police force. The radio works on some frequency ranges
like High (66 MHz to 88 MHz), Very High frequency (136 MHz to 174 MHz) and
Ultra High frequency (350 MHz to 800MHz).Thereafter parameters like frequency,
sensitivity, distortion, stability, fidelity, deviation of both transmitted signal and
received signal were measured to check it out whether they were matching with its
standard reference value or not.
Solar Appliances and modules manufacturing and testing section:
In this section general solar appliances like, solar torch, emergency light, solar PV
driver and module, LED street lights, solar inverter and pumping machine etc. are
assembled and manufactured in SIMOCO solar manufacturing unit.
Some more Pictures in fabrication and production department:
UPCOMING EVENTS
1. National Conference on Optics and Photonics 2016.
2. Solar Project.
3. Seminar on Nano-Photonics and VLSI.
4. Panel Discussion on “Recent Scenario of Optics and Electronics Industry in
India”.
5. School Awareness Program.
Spie Elected Officials 2015-16
Post Name Email id Spie Id
President Swarnav
Mukhopadhyay
3638530
Vice
President
Avirup Roy [email protected]
3638724
Secretary Dibyendu
Mukherjee
[email protected] 3638721
Joint
Secretary
Supriyo Koyal [email protected]
3643100
Treasurer Siddhant Gupta [email protected]
3679538
Co-
Treasurer
Mayukh Sinha [email protected]
3638543
Web
master
Akash De [email protected]
Contact Details:
Dr. Shila Ghosh (Advisor): [email protected]
Dr. Surajit Mandal: [email protected]
Dr. Arijit Saha: [email protected]
Swarnav Mukhopadhyay (President):
Debdyut Hajra: [email protected]
-Report by Swarnav Mukhopadhyay
