Br Enclosures Ilinq Catalogue

7/30/2019 Br Enclosures Ilinq Catalogue

1/64

2011 iLINQ CATALOGUE


2/64

Commerical & Domestic Metering EnclosuresHager B&R is a joint venture between B&R and Hager, representing B&Rs domestic and

commercial range of enclosures. These include domestic metering enclosures & connection

equipment (meter boxes), commercial metering enclosures and switchboards up to 630 Amps.

Data Racks and Cabinets

B&R Data Systems is a leading Australian manufacturer of high quality products and solutions

for the Australian ICT, Telecommunications and Data Centre markets. B&R Data Systems

specialise in server and network racks, power management, cooling, cable management and

security solutions.

Hazardous Area Equipment

B&R Ex Systems is a new division of B&R Enclosures specialising in the supply of electricalequipment for hazardous areas. B&R Ex Systems offer a comprehensive range of enclosures,

lighting, controls and glanding, as well as custom control touts.

Industrial Enclosures & Switchboards

B&R Enclosures manufactures a range of electrical enclosures for a variety of applications in

industrial, mining, switchboards and process control. Since operations began in 1955, B&R

Enclosures has been a leading manufacturer of electrical enclosures to the Australian market.

B&R engages in a policy of continuous development and improvement of its products. Therefore the Company reserves the right to alter, add and/or delete speciciations of any product or equipment without notice and without incurring liability.

B&R Enclosures is Australias leading manufacturer of electrical enclosures, with a comprehensive range of products designed

for industrial conditions, and the severe environments so common in Australia.

A brand built on quality

Company Overview


3/64

Introduction

Overview...................................................................................................................2

Single Door Enclosure Overview ..............................................................................4

Double Door Enclosure Overview ............................................................................5

Enclosure Selection Guide .......................................................................................6

Size Selection Charts

1800 high, 400 deep .................................................................................................7

1800 high, 600 deep .................................................................................................8

1800 high, 800 deep .................................................................................................92000 high, 400 deep ...............................................................................................10

2000 high, 600 deep ...............................................................................................11

2000 high, 800 deep ...............................................................................................12

2200 high, 400 deep ...............................................................................................13

2200 high, 600 deep ...............................................................................................14

2200 high, 800 deep ...............................................................................................15

Product Information

General Accessories...............................................................................................16

Single Door Enclosure ............................................................................................18

Double Door Enclosure ..........................................................................................20

Frame .....................................................................................................................22

Single Door .............................................................................................................24

Double Door ...........................................................................................................26

Cladding .................................................................................................................28

Top Cover ...............................................................................................................30

Gland Plate & Frame ..............................................................................................32

Adjustable Gland Plate System ..............................................................................34

Mounting Pan .........................................................................................................36

Swing Frame ..........................................................................................................38

Swing Frame Trim ..................................................................................................40

19" Rack Rails ........................................................................................................42

Internal Rail System ...............................................................................................44

Hinged Escutcheon ................................................................................................46

Plinth Kit .................................................................................................................48

Plinth Cladding .......................................................................................................50

Plinth Mounting Base..............................................................................................52

Plan Holder .............................................................................................................54

Laptop Lectern........................................................................................................56

Light Kits .................................................................................................................58

Technical GuideIP Ratings Chart .....................................................................................................60

Contents


4/64

2 Introduction

Overview

B&R manufacture a range of products

to suit various environments and

locations. Some enclosures are suited

to highly specic applications whilst

others have been designed for a wide

variety of uses. We call these multiple

application enclosure systems.

These multiple application systems

are available with a wide range

of accessories to better allow the

enclosures to be congured to suit the

application. The benet of a multiple

application enclosure is that you are

able to order your highly specic

requirement to arrive quickly and cost-

effectively, by conguring a standard

enclosure with a range of accessories.

iLINQ is our newest multiple application

enclosure system and is suitable for a

range of applications including:

Industrial automation

Control system & plant construction

Electronic packaging

Information technology Networking infrastructure

Telecommunications

iLINQ is a bayable enclosure

system that can be congured to

suit a wide variety of applications. It

features a unique symmetrical rail

prole that allows components to be

interchangeable whether on top, bottom,

front or back. As part of the design

process B&R has worked with a widevariety of industry experts to ensure

iLINQ suits industry specications and

applications.

The enclosures are available in

single or double door congurations

and can be quickly and easily bayed

together. A standard enclosure comes

preassembled with frame, door, xed

rear panel, top (with eye bolts), gland

plate system and mounting pan. Ifrequired as a stand alone enclosure,

side panels or doors can be purchased

separately. Once bayed together or

tted with side panels, enclosures are

rated to IP55, ensuring limited ingress

of dust and complete protection from

low pressure jets of water. An extensive

range of cladding components and

accessories are available, and all

components that make up an enclosure

can be purchased individually, so that a

solution can be congured to meet your

exact requirements.


5/64

iLINQ is an Australian designed and

manufactured, high quality, modular,

bayable enclosure system, that is

extremely versatile and easy to install.

B&R developed the iLINQ range

in response to demand from our

customers for a user friendly bayable

enclosure system which was both easy

to use and cost-effective.

Some of the key features of iLINQ are:

Easy to order

Easy to assemble

Easy to install

Flexible design

Panel cutouts and paint any

powdercoat colour (special order)

Easy to order The symmetrical

design of the enclosure system allows

the same part to t many locations.

The easy to use catalogue clearly

lists all parts and accessories for each

enclosure size. All B&R staff have had

extensive assembly training and areavailable to help congure your iLINQ

bayable enclosure system.

Easy to assemble iLINQ enclosures

are delivered preassembled with

front door, rear panel, gland plate

system, mounting pan and at top. All

components can also be purchased

separately for applications which

require a special conguration.

Cladding can be taken off and rotated

very quickly. A door can be changed

from right to left hand hinging in less

than 5 minutes. For ease of installation,

there are only 5 metric hex drive keys

required 2, 3, 4, 5, 6. All xings are

hex drive button head set screws andtaptites.

M6 and M8 front access cage nuts and

M5 taptites are used throughout the

enclosures, at 25mm increments.

Easy to install The plinth system

allows levelling from inside the

enclosure frame. One person can bay

iLINQ enclosures together using hand

tools or a battery drill.

Why buy iLINQ?The ultimate enclosure solution for multiple applications.

B&R Enclosures iLINQ Catalogue 2011 3


6/64

1800mm high

Top Cover Flat

Fixed Cladding*

Mounting Pan

Gland Plate System

Frame

Door

Model LQE180404 LQE180604 LQE180804 LQE180406 LQE180606 LQE180806 LQE180408 LQE180608 LQE180808

Height (mm) 1800 1800 1800 1800 1800 1800 1800 1800 1800

Width (mm) 400 600 800 400 600 800 400 600 800

Depth (mm) 400 400 400 600 600 600 800 800 800


Height (mm) 2000 2000 2000 2000 2000 2000 2000 2000 2000

Width (mm) 400 600 800 400 600 800 400 600 800

Depth (mm) 400 400 400 600 600 600 800 800 800


Height (mm) 2200 2200 2200 2200 2200 2200 2200 2200 2200

Width (mm) 400 600 800 400 600 800 400 600 800

Depth (mm) 400 400 400 600 600 600 800 800 800

iLINQ Single Door Enclosure

2000mm high

2200mm high

*All side cladding sold separately

Eye Bolts

4 Introduction

Single Door Enclosure Overview


7/64

Top Cover FlatEye Bolts

Frame

Door second

closing

Mounting Pan

Door rst closing

1800mm high

Model LQE180804/DD LQE181004/DD LQE181204/DD LQE180806/DD LQE181006/DD LQE181206/DD LQE180808/DD LQE181008/DD LQE181208/DD

Height (mm) 1800 1800 1800 1800 1800 1800 1800 1800 1800

Width (mm) 800 1000 1200 800 1000 1200 800 1000 1200

Depth (mm) 400 400 400 600 600 600 800 800 800


Height (mm) 2000 2000 2000 2000 2000 2000 2000 2000 2000

Width (mm) 800 1000 1200 800 1000 1200 800 1000 1200

Depth (mm) 400 400 400 600 600 600 800 800 800


Height (mm) 2200 2200 2200 2200 2200 2200 2200 2200 2200

Width (mm) 800 1000 1200 800 1000 1200 800 1000 1200

Depth (mm) 400 400 400 600 600 600 800 800 800

iLINQ Double Door Enclosure

2000mm high

2200mm high

*All side cladding sold separately

Fixed Cladding*

Gland Plate System


Double Door Enclosure Overview


8/64

nc osure eatures

Galvanised ro formed prole

Stainless steel hinge pins

Symmetrical frame

Patented 100mm & 200mm plinth system

Front M6 & M8 nu s in rame

Materials

Frame galvanised steel

c ness .

Cladding zinc coated steel

hickness .6mm

as e po yur e ane oame n p ace

ur ace n s pow ercoa e

ro ec o n ra n g

iLINQ enclosures feature a unique symmetrical rail prole that allows components to be interchangeable whether on top,

bottom, front or back.

The enclosures are available in single or double door congurations and can be quickly and easily bayed together. Once bayed

together or tted with cladding, enclosures are rated to IP55, ensuring limited ingress of dust and complete protection from low

pressure jets of water.

The enclosure is powdercoated with a light grey RAL7035 ripple nish. Other colours and solutions are available upon request.

Inclusions

Frame

Rear xed panel (screw on type)

Flat top with eye bolts

Solid door (1000mm & 1200mm wide cabinets are tted with double doors)

Quarter turn lock with a 7mm square insert

3mm thick galvanised mounting pan

Fixed gland plate 1.6mm thick galvanised steel plate(2 per set on double door enclosures)

Step 1 Select enclosure model size from Size Selection Chart (pages 7 15). The charts are categorised by height

and depth (one page displays one height and depth with widths available) and is incremented from smallest to

largest height.

Step 2 Select cladding & mounting components from the range listed in the size selection column under the

selected enclosure.

Step 3 Select accessories from the range listed in the selected enclosure column in the size selection chart.

Step 4 If additional information is required see dimensions section (from page 16 59) or contact your local B&Rsales ofce.

Step 5 Contact local sales ofce to place order and/or arrange for any special requirements such as punching or

specic powdercoat colours.

How to order

Enclosure Selection Guide

6 Introduction


9/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

# Items required with component

1800 High, 400 Deep

Single Door Double Door (DD)

PageEnclosure Width (mm) 400 600 800 800 DD 1000 DD 1200 DD

Enclosure LQE180404 LQE180604 LQE180804 LQE180804/DD LQE181004/DD LQE181204/DD 1821

Enclosure includes frame, door, xed rear panel, at top (with eye bolts), gland plate system and mounting pan. See below for side panels and plinths.

Cladding & Mounting Components

Description 400 600 800 800 DD 1000 DD 1200 DD Page

Side

Cladding CP hinged LQCP1804 LQCP1804 LQCP1804 LQCP1804 LQCP1804 LQCP1804 2829

Cladding CF xed LQCF1804 LQCF1804 LQCF1804 LQCF1804 LQCF1804 LQCF1804 2829

Door solid LQD1804 LQD1804 LQD1804 LQD1804 LQD1804 LQD1804 2427

Plinth kit 100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP0112 4849


Side Plinth cladding 100 mm LQPC0104 LQPC0104 LQPC0104 LQPC0104 LQPC0104 LQPC0104 5051

Plinth cladding 200 mm LQPC0204 LQPC0204 LQPC0204 LQPC0204 LQPC0204 LQPC0204 5051

Side cladding and plinth components not included in enclosure (LQE) assembly

Accessories


Swing Frames

Swing Frame (RU) LQSF36U LQSF36U LQSF36U 3839

# Rail horizontal (2) # LQRF06 # LQRF08 # LQRF08 3839

Trim side LQSS36U08 LQSS36U08 4041

Trims centre (2) LQSC36U08 LQSC36U08 4041

# Set of 2 Horizontal rails required with each swing frame sold. Swing frame trims optional

Escutcheon hinged

1800 high enclosure equals 17 x 100mm internal escutcheon modules

Escutcheon LQHE1706 LQHE1708 LQHE1708 4647

# Rail vertical # LQRV17 # LQRV17 # LQRV17 4647

Rail horizontal LQRH06 LQRH08 LQRH08 4647

# Vertical rails required with each escutcheon

Horizontal rails optional

Plan Holder

35 mm deep LQPH04/35 LQPH06/35 LQPH06/35 LQPH04/35 LQPH05/35 LQPH06/35 5455

# Door rail # LQRD06 # LQRD08 # LQRD06 4445



# 1 required when tting plan holder

Laptop Lectern

Laptop lectern LQLL LQLL LQLL 5657


# 2 required when tting laptop lecterns

Light Kits

Fluorescent Light kit LQLK15W LQLK15W LQLK15W LQLK15W LQLK15W 5859

LED Light Kit LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 LQLK10W/L8 5859

Door Rail

Horizontal LQRD04 LQRD06 LQRD08 LQRD04 LQRD05 LQRD06 4445

Size Selection Chart



10/64

1800 High, 600 Deep

Single Door Double Door (DD)Page

Enclosure Width (mm) 400 600 800 800 DD 1000 DD 1200 DD





Side



Door LQD1806 LQD1806 LQD1806 LQD1806 LQD1806 LQD1806 2427






Accessories


Swing Frames


# Rail - horizontal # LQRF06 # LQRF08 # LQRF08 3839


Trim centre LQSC36U08 LQSC36U08 4041

# Horizontal rails required with each swing frame sold. Swing frame trims optional

Escutcheon - hinged

1800 high enclosures equals 17 x 100mm internal escutcheon modules






Plan Holder






Laptop Lectern


# Door rail # LQRD06 # LDRD08 # LQRD06 4445


Light Kits



Door Rail



8 Size Selection Chart

Enclosure Selection Guide


11/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

1800 High, 800 Deep

Single Door Double Door (DD)Page

Enclosure Width (mm) 400 600 800 800 DD 1000 DD 1200 DD





Side









Accessories


Swing Frames


# Rail horizontal # LQRF06 # LQRF08 # LQRF08 3839




Escutcheon hinged







Plan Holder






Laptop Lectern




Light Kits



Door Rail






12/64

2000 High, 400 Deep







Side

Cladding CP - hinged LQCP2004 LQCP2004 LQCP2004 LQCP2004 LQCP2004 LQCP2004 2829

Cladding CF - xed LQCF2004 LQCF2004 LQCF2004 LQCF2004 LQCF2004 LQCF2004 2829


Plinth kit -100 mm LQP0104 LQP0106 LQP0108 LQP0108 LQP0110 LQP0112 4849

Plinth kit - 200 mm LQP0204 LQP0206 LQP0208 LQP0208 LQP0210 LQP0212 4849

Side Plinth cladding - 100 mm LQPC0104 LQPC0104 LQPC0104 LQPC0104 LQPC0104 LQPC0104 5051

Plinth cladding - 200 mm LQPC0204 LQPC0204 LQPC0204 LQPC0204 LQPC0204 LQPC0204 5051


Accessories


Swing Frames






Escutcheon hinged







Plan Holder


# Door rail # LQRD06 # LQRD08 - - # LQRD06 4445




Laptop Lectern




Light Kits



Door Rail






13/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

2000 High, 600 Deep







Side









Accessories


Swing Frames






Escutcheon - hinged







Plan Holder






Laptop Lectern




Light Kits



Door Rail






14/64

2000 High, 800 Deep







Side









Accessories


Swing Frames






Escutcheon - hinged







Plan Holder






Laptop Lectern




Light Kits



Door Rail






15/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

2200 High, 400 Deep







Side









Accessories


Swing Frames






Escutcheon hinged







Plan Holder






Laptop Lectern




Light Kits



Door Rail






16/64

2200 High, 600 Deep







Side









Accessories


Swing Frames

Swing Frame (RU) LQSF45U LQSF45U LQSF45U LQSF45U LQSF45U 3839





Escutcheon hinged







Plan Holder






Laptop Lectern




Light Kits



Door Rail






17/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

2200 High, 800 Deep







Side









Accessories


Swing Frames

Swing Frame (RU) LQSF45U LQSF45U LQSF45U LQSF45U LQSF45U 3839

# Rail - horizontal # LQRF06 # LQRF08 # LQRF08 3839

Trim - side LQSS45U08 LQSS45U08 4041

Trim - centre LQSC45U08 LQSC45U08 4041


Escutcheon - hinged







Plan Holder





* 1 required when tting plan holder

Laptop Lectern




Light Kits



Door Rail






18/64

Baying Accessories

Catalogue No Description

LQBK Baying kit (8 external / 10 internal)

LQMF1801 Mounting pan inll 1800 high



Locks


LQLA7S Lock assembly 7mm square

LQLS/92268 Swing handle, keylockable (92268)

SKZ Key - ZA27 3 way (7 mm , 8 mm , 3 mm )

SK8 Key - Metal (8 mm )

LQLI8S Lock insert 8mm square

LQLI8T Lock insert 8mm triangle

LQLI3D Lock insert 3mm double bit

Square Lock InsertSKZ key

Swing Handle Lock

Baying kit and mounting pan

inll panel

7mm Square Turnbuckle

Lock Assembly

16 Product Information

General Accessories


19/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

General Accessories


LQDS Door Stay (white)

Fixings

Catalogue No Description Pack Qty

LQCG06 Cage nuts M6 (front access) 20

LQCG08 Cage nuts M8 (front access) 20

IPCG06 Cage nuts M6 (rear access) 20

IPCG08 Cage nuts M8 (rear access) 20

LQB0612 Button head hex drive set screws (M6 x 12) 20







IPWS06 Star washers M6 20

IPWS08 Star washers M8 20

IPWF06 Flat washers M6 20

IPWF08 Flat washers M8 20

Front access cage nut Rear access cage nut

Star washers Flat washers

Button head hex drive set screw

For more information visit www.brenclosures.com.au/lqa.htm B&R Enclosures iLINQ Catalogue 2011 17


20/64

Inclusions

Frame


Flat top with four eye bolts

Solid door


Mounting pan 3mm thick galvanised Fixed gland plate 1.6mm thick galvanised steel

iLINQ single door enclosures feature a unique symmetrical rail prole that allows components to be interchangeable whether on

top, bottom, front or back.

The enclosures can be bayed with any combination of single or double door enclosure widths. The heights and depths must

be the same. Once bayed together or tted with side panels, enclosures are rated to IP55, ensuring limited ingress of dust and

complete protection from low pressure jets of water.

The enclosure is powdercoated with a light grey RAL7035 ripple nish. Other options and solutions are available upon request.

nc osure eatures

Galvanised roll formed prole

Stainless s ee nge p ns

Symmetrical frame

a en e p n sys em (optional)

Front access M6 & M8 cage nuts in rame

Materials


c ness . mm

Cladding zinc coated steel

Thickness 1.6mm

Gasket po yure ane foamed n p ace

Surface nish pow ercoa e

ro ec o n ra n g

brenclosures.com.au/lqse.htm


Single Door Enclosure


21/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

2000mm High

Catalogue No

Height Width Depth

H1 W1 D1

LQE200404 2004 399 408

LQE200604 2004 599 408

LQE200804 2004 799 408

LQE200406 2004 399 608

LQE200606 2004 599 608

LQE200806 2004 799 608

LQE200408 2004 399 808LQE200608 2004 599 808

LQE200808 2004 799 808

1800mm High

Catalogue No

Height Width Depth

H1 W1 D1

LQE180404 1804 399 408

LQE180604 1804 599 408

LQE180804 1804 799 408

LQE180406 1804 399 608

LQE180606 1804 599 608

LQE180806 1804 799 608

LQE180408 1804 399 808LQE180608 1804 599 808

LQE180808 1804 799 808

2200mm High

Catalogue No

Height Width Depth

H1 W1 D1

LQE220404 2204 399 408

LQE220604 2204 599 408

LQE220804 2204 799 408

LQE220406 2204 399 608

LQE220606 2204 599 608

LQE220806 2204 799 608

LQE220408 2204 399 808LQE220608 2204 599 808

LQE220808 2204 799 808

Front View

H1

"

"

W1

H2

Side View

D1

92

B&R Enclosures iLINQ Catalogue 2011 19For more information visit www.brenclosures.com.au/lqse.htm

Single Door Enclosure

Additional Dimensions

Front Opening

Height, H2 = (H1 94)Width, W2 = (W1 90)

Side Opening

Height, H2 = (H1 94)

Depth, D2 = (D1 99)

Top Opening

Width, W2 = (W1 90)

Depth, D2 = (D1 99)

Bottom Fixings

Width, W3 = (W1 131)

Depth, D3 = (D1 140)

Top Opening

W1

W2

W3

D1

D2

D3

27

Detail

D1

D2

D3

W1

W2

W3


22/64

Inclusions

Frame


Flat top with four eye bolts

2 Solid doors

1st closing door has 2 locking points2nd closing door has 4 locking points


Mounting Pan 3mm thick galvanised Fixed gland plates 2 x 1.6mm thick galvanised steel

iLINQ double door enclosures feature a unique symmetrical rail prole that allows components to be interchangeable whether

on top, bottom, front or back.

The enclosures can be bayed with any combination of single or double door enclosure widths. The heights and depths must

be the same. Once bayed together or tted with side panels, enclosures are rated to IP55, ensuring limited ingress of dust and

complete protection from low pressure jets of water.

The enclosure is powdercoated with a light grey RAL7035 ripple nish. Other colours and solutions are available upon request.

nc osure eatures

a van se ro orme pro e


ymme r c a rame

Patented plinth system (optional)

ron nu s n rame

a er a s


Thickness 1.5mm

a ng z n c coa e s ee

Thickness 1.6mm

Gasket polyurethane foamed in place

Surface nish powdercoated RAL7035 Protection rating IP55

brenclosures.com.au/lqdde.htm

Double Door Enclosure



23/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

2000mm High

Catalogue No

Height Width Depth

H1 W1 D1

LQE200804/DD 2004 799 408

LQE201004/DD 2004 999 408

LQE201204/DD 2004 1199 408

LQE200806/DD 2004 799 608

LQE201006/DD 2004 999 608

LQE201206/DD 2004 1199 608

LQE200808/DD 2004 799 808

LQE201008/DD 2004 999 808

LQE201208/DD 2004 1199 808

1800mm High

Catalogue No

Height Width Depth

H1 W1 D1

LQE180804/DD 1804 799 408

LQE181004/DD 1804 999 408

LQE181204/DD 1804 1199 408

LQE180806/DD 1804 799 608

LQE181006/DD 1804 999 608

LQE181206/DD 1804 1199 608

LQE180808/DD 1804 799 808

LQE181008/DD 1804 999 808

LQE181208/DD 1804 1199 808

2200mm High

Catalogue No

Height Width Depth

H1 W1 D1

LQE220804/DD 2204 799 408

LQE221004/DD 2204 999 408

LQE221204/DD 2204 1199 408

LQE220806/DD 2204 799 608

LQE221006/DD 2204 999 608

LQE221206/DD 2204 1199 608

LQE220808/DD 2204 799 808

LQE221008/DD 2204 999 808

LQE221208/DD 2204 1199 808

Front View

H1

"

"

W1


Front Opening


Side Opening


Depth, D2 = (D1 99)

Top Opening

Width, W2 = (W1 90)

Depth, D2 = (D1 99)

Bottom Fixings

Width, W3 = (W1 131)

Depth, D3 = (D1 140)

Top Opening

W1

W2

W3

D1

D2

D3

27

B&R Enclosures iLINQ Catalogue 2011 21For more information visit www.brenclosures.com.au/lqdde.htm

Double Door Enclosure

Detail

D1

D2

D3

W1

W2

W3

H2

Side View

D1

92


24/64

rame eatures

a van se ro orme pro e

High frequency welded

ymme r c a rame

Ideal for custom suites

s a n ess s ee nge p ns

Front access M6 & M8 cage nuts

Materials

a van se s ee

hickness .5mm

Inclusions Symmetrical frame

16 cladding mounts


iLINQ frames are ideal when the enclosures are to be bayed together into a customised suite and are available preassembled.

Doors, side panels, tops, gland plates, plinths and other accessories can be added to the frame so that it is congured to the

specic requirements of the application.

brenclosures.com.au/lqf.htm

Frame



25/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

2200mm High

Catalogue No

Height Width Depth

H1 W1 D1

LQF220404 2199 399 399

LQF220604 2199 599 399

LQF220804 2199 799 399

LQF221004 2199 999 399

LQF221204 2199 1199 399

LQF220606 2199 599 599

LQF220806 2199 799 599

LQF221006 2199 999 599

LQF221206 2199 1199 599

LQF220808 2199 799 799

LQF221008 2199 999 799

LQF221208 2199 1199 799

1800mm HighHeight Width Depth

Catalogue No H1 W1 D1

LQF180404 1799 399 399

LQF180604 1799 599 399

LQF180804 1799 799 399

LQF181004 1799 999 399

LQF181204 1799 1199 399

LQF180606 1799 599 599

LQF180806 1799 799 599

LQF181006 1799 999 599

LQF181206 1799 1199 599

LQF180808 1799 799 799

LQF181008 1799 999 799

LQF181208 1799 1199 799

2000mm HighHeight Width Depth

Catalogue No H1 W1 D1

LQF200404 1999 399 399

LQF200604 1999 599 399

LQF200804 1999 799 399

LQF201004 1999 999 399

LQF201204 1999 1199 399

LQF200606 1999 599 599

LQF200806 1999 799 599

LQF201006 1999 999 599

LQF201206 1999 1199 599

LQF200808 1999 799 799

LQF201008 1999 999 799

LQF201208 1999 1199 799

Side View

D1

H2

B&R Enclosures iLINQ Catalogue 2011 23For more information visit www.brenclosures.com.au/lqf.htm

Frame


Front Opening


Side Opening


Depth, D2 = (D1 94)

Top Opening

Width, W2 = (W1 90)

Depth, D2 = (D1 90)

Bottom Fixings

Width, W3 = (W1 131)

Depth, D3 = (D1 131)

Top Opening

W1

W2

W3

D1

D2

D3

27

Detail

D1

D2

D3

W1

W2

W3

Front View

W1

H1


26/64

ng e oor eatures

uppor oa s o g

4 hinge and locking points

u a e or enc osures o mm w e

Quick & easy installation

Materials

Body zinc coated steel

c ness .6mm


Surface nish powdercoated RAL7035

Inclusions

Symmetrical door

19 x 19mm door stiffener rails


7mm square quarter turn lock

Earth strap kit

iLINQ doors can be tted on any vertical surface of the frame, front, rear or either side in right or left hand congurations.They

are available in a variety of styles to suit the application including:

Doors tted with windows (indicated by /W on the part number)

Vented doors (indicated by /V on the part number)

All iLINQ doors are stiffened to support loads of up to 100 kg and come complete with 4 hinge and locking points and a quarter

turn locking system with a 7mm square insert. Standard single doors can be tted in minutes to all four sides of the frame in

every combination of left or right hand hinge. Single doors are suitable for enclosures up to 800mm wide.

A key lockable (92268) swing handle is available as an option. Lock inserts with 8mm triangle, 8mm square and 3mm double bit

can be purchased seperately. Two M6 earth studs are included.

See page 26 for information on double doors.

brenclosures.com.au/lqsd.htm

Single Door



27/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

Single Door

Catalogue No

External

Single Door

Door Rail

Fixing Points

Internal

Stiffener Rail Window SizeHeight Width Height Width Height Width Height Width

Solid Door Window Door Vented Door H1 W1 H2 W2 H3 W3 H4 W4

LQD1804 1758 358 1669 269 1650 250

LQD1806 LQD1806/W LQD1806/V 1758 558 1669 469 1650 450 1620 420

LQD1808 LQD1808/W LQD1808/V 1758 758 1669 669 1650 650 1620 620

LQD2004 1958 358 1869 269 1850 250

LQD2006 LQD2006/W LQD2006/V 1958 558 1869 469 1850 450 1820 420

LQD2008 LQD2008/W LQD2008/V 1958 758 1869 669 1850 650 1820 620

LQD2204 2158 358 2069 269 2050 250

LQD2206 LQD2206/W LQD2206/V 2158 558 2069 469 2050 450 2020 420

LQD2208 LQD2208/W LQD2208/V 2158 758 2069 669 2050 650 2020 620

W1

W2

W3

W4

H2

H3

H4

Internal View

60

49

55

55

Side View

H1

17

27

B&R Enclosures iLINQ Catalogue 2011 25For more information visit www.brenclosures.com.au/lqsd.htm

Front View

W1

H1

"

"

Single Door


28/64

iLINQ double doors can be tted to any vertical surface of the frame, front, rear or either side. They are available in a variety of

styles to suit the application including:

Doors tted with windows (indicated by /W on the part number)

Vented doors (indicated by /V on the part number)

All iLINQ doors are stiffened to support loads of up to 100 kg and come complete with 4 hinge and locking points and a quarter

turn locking system with a 7 mm square insert. Standard double doors can be tted in minutes to all four sides of the frame in

every combination of left and right hand hinge. Double doors are available as an option for 600mm wide enclosures.

A key lockable (92268) swing handle is available as an option. Lock inserts with 8mm triangle, 8mm square and 3mm double bit

can be purchased seperately. Two M6 earth studs on each door are included.

See page 24 for information on single doors.

Inclusions

Symmetrical door with mullion rst closing

Symmetrical door with lock second closing

19 x 19mm door stiffener rail

4 hinge and 2 locking points on rst closing door

4 hinge and locking points on second closing door

7mm square quarter turn lock

Earth strap kit

ou e oor eatures

uppor oa s o g


u a e or enc osures mm an w er

Quick & easy installation

Materials

Body Zinc coated steel

c ness .6mm



brenclosures.com.au/lqdd.htm

Double Door



29/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

Double Door

Catalogue No

ExternalDouble Doors

Stiffener RailFixing Points

InternalStiffener Rail Window Size

Height Width Height Width Height Width Height Width

Solid Door Window Door Vented Door H1 W1 H2 W2 H3 W3 H4 W4

LQDD1808 1758 758 1669 269 1650 250

LQDD1810 LQDD1810/W LQDD1810/V 1758 958 1669 369 1650 350 1620 320

LQDD1812 LQDD1812/W LQDD1812/V 1758 1158 1669 469 1650 450 1620 420

LQDD2008 1958 758 1869 269 1850 250

LQDD2010 LQDD2010/W LQDD2010/V 1958 958 1869 369 1850 350 1820 320

LQDD2012 LQDD2012/W LQDD2012/V 1958 1158 1869 469 1850 450 1820 420

LQDD2208 2158 758 2069 269 2050 250

LQDD2210 LQDD2210/W LQDD2210/V 2158 958 2069 369 2050 350 2020 320

LQDD2212 LQDD2212/W LQDD2212/V 2158 1158 2069 469 2050 450 2020 420

Front View

H1

"

"

W1

W1

W3

W2

W4

W3

W2

W4

Side View

H1

17

27

B&R Enclosures iLINQ Catalogue 2011 27For more information visit www.brenclosures.com.au/lqdd.htm

Internal View

65

65

55

55

H3

H4

H2

Double Door


30/64

a ng eatures

o ver ca rame sur ace

Option of xed hinged cladding

uppor s oa s o o g

a er a s

Body zinc coated steel

Thickness 1.6mm

as e po yur e ane oame n p ace


iLINQ cladding panels can be tted on any vertical surface of the frame, front, rear or either side. They are available in two

congurations:

Fixed Screw xed to 8 hinge/cladding points assembled on the frame.

Hinged Screw xed to one side and hinged on the other.

iLINQ panels will support loads of up to 100kg.

Two M6 earth studs are included.

Inclusions (Fixed)

Symmetrical xed panel

Eight M6 x 12 button head hex drive set screws

Earth strap kit

Inclusions (Hinged)

Symmetrical hinged panel

Four M6 x 12 button head hex drive set screws

4 hinges

Earth strap kit

brenclosures.com.au/lqc.htm

Cladding



31/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

Cladding

Catalogue No

External

Height Width

Fixed Panel Hinged Panel H1 W1

LQCF1804 LQCP1804 1758 357LQCF1806 LQCP1806 1758 557

LQCF1808 LQCP1808 1758 757

LQCF1810 LQCP1810 1758 957

LQCF1812 LQCP1812 1758 1157

LQCF2004 LQCP2004 1958 357

LQCF2006 LQCP2006 1958 557

LQCF2008 LQCP2008 1958 757

LQCF2010 LQCP2010 1958 957

LQCF2012 LQCP2012 1958 1157

LQCF2204 LQCP2204 2158 357

LQCF2206 LQCP2206 2158 557

LQCF2208 LQCP2208 2158 757

LQCF2210 LQCP2210 2158 957

LQCF2212 LQCP2212 2158 1157

Fixed

Side ViewFront View Side View

H1

W1

Hinged

Front View

H1

W1

15

15

B&R Enclosures iLINQ Catalogue 2011 29For more information visit www.brenclosures.com.au/lqc.htm


32/64

op over eatures

a ven e op ons ava a e

4 M12 Eyebolts (at top)

Materials

inc coated steel

c ness . mm



iLINQ top covers are available in two variations at or vented.

Flat top covers are used for sealing the top of the enclosure and come with four M12 eyebolts for lifting (SWL 1360kg). They

come complete with all xings required for installation and two M6 earth studs.

Vented top covers are typically used when the enclosure is positioned in a controlled environment and additional cooling air ow

is required. They come complete with all xings required for installation and two M6 earth studs (vented option does not come

with M12 eyebolts). A gland plate system can also be used on the top of the frame, if required.

Refer to page 32 for information on gland plate systems.

Inclusions (Flat Top Cover)

Symmetrical at top

4 x M12 eyebolts

Sealing washers

4 x internal tube nut xings

(Double door enclosures have 6 xing points)

Earth strap kit All xings

Inclusions (Vented Top Cover)

Symmetrical vented top

4 x M8 x 50 hexagonal spacers

8 x M8 x 25 button head hex drive set screws

8 x M8 star washers

Earth strap kit

All xings

brenclosures.com.au/lqtc.htm

Top Cover



33/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

Top Cover

Catalogue No

External Fixing Position

Width Depth Width Depth

Flat Vented W1 D1 W2 D2

LQTF0404 LQTV0404 399 399 292 292

LQTF0604 LQTV0604 599 399 492 292

LQTF0804 LQTV0804 799 399 692 292

LQTF1004 LQTV1004 999 399 892 292

LQTF1204 LQTV1204 1199 399 1092 292

LQTF0606 LQTV0606 599 599 492 492

LQTF0806 LQTV0806 799 599 692 492

LQTF1006 LQTV1006 999 599 892 492

LQTF1206 LQTV1206 1199 599 1092 492

LQTF0808 LQTV0808 799 799 692 692

LQTF1008 LQTV1008 999 799 892 692

LQTF1208 LQTV1208 1199 799 1092 692

Side View

Flat

Top View

D1

D2

24

W1

W2

Side View

Vented

D1

D

2

Top View

50

W1

W2

B&R Enclosures iLINQ Catalogue 2011 31For more information visit www.brenclosures.com.au/lqtc.htm


34/64

Gland System Features

Fitted internally or externally into top or

bottom of frame

arge g an ng

Easy when tting removing

va a e con gure or spec a

applications

Materials

rame a umn um ex rus on

Gasket closed cell neoprene

a e op ons

1.6mm galvanised steel

3mm brassmm a u m n um

Inclusions (Gland Kit) Symmetrical extruded aluminium frame

Symmetrical 1.6 mm galvanised steel gland plates

1000mm & 1200mm wide 2 xed gland plates and centre mullion.

All xings

Inclusions (Gland Plates)

Symmetrical gland plate in selected material

All xings

NOTE: Gland frame puchased separately

Inclusions (Gland Frame)

Symmetrical extruded aluminium frame

All xings

NOTE: Gland plates puchased separately

The iLINQ gland plate kit consists of an extruded aluminium frame tted with a xed 1.6 mm galvanised steel gland plate. To

build a customised gland plate system the frame and optional gland plate material can be purchased separately and congured

to suit the application.

brenclosures.com.au/lqgpf.htm

Gland Plate and Frame



35/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

Gland Plate & Frame

Gland Plate Kit Gland FrameGland Plate1.6 mm steel

Gland Plate6mm Aluminium

Gland Plate3 mm Brass

Opening Size Plate Size

Width Depth Width Depth

W1 D1 W2 D2

LQGK0404 LQGF0404 LQGP0404 LQGP0404/A6 LQGP0404/B3 243 243 270 270












Gland Frame

Top View

D1

Side View

26

W1

Gland Plate

Top View

D2

W2

B&R Enclosures iLINQ Catalogue 2011 33For more information visit www.brenclosures.com.au/lqgpf.htm


36/64

usta e an ateeatures

e n erna y ex erna y n o op

o om o rame

Large glanding area

asy w en ng remov ng

Available as a kit

Materials

rame a umn um ex rus on

Plate 1.6mm galvanised steel

Gasket closed cell neoprene or

oame n p ace poyure ane

Inclusions

Extruded aluminium frame

1.6mm steel gland plates (see page 35 for quantities)

All xings

iLINQ adjustable gland plate systems are optional in enclosures 600mm (depth or width) and above. Gland plates can be tted

either internally or externally into the bottom or top of new or existing enclosures. The adjustable gland plate kit is supplied with

an extruded aluminium frame and one set of 3 plates (2 xed, 1 sliding) of 1.6mm galvanised steel for 600mm and 800mm wide

frames and 2 sets for 1000mm and 1200mm wide frames.

The sliding plate can be adjusted to form an opening or removed to punch holes as required. The plates are secured by serrated

clamp nuts for effective earthing.

brenclosures.com.au/lqagp.htm

Adjustable Gland Plate System



37/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

Adjustable Gland Plate System

Gland Plate Kit Number of plates

Opening Size Overall Plate Size

Individual

PlateWidth Depth Width Depth Depth

W2 D2 W1 D1 D3

LQGK0606/GA 3 443 443 470 470 166

LQGK0806/GA 3 643 443 670 470 166

LQGK1006/GA 6 843 443 870 470 166

LQGK1206/GA 6 1043 443 1070 470 166

LQGK0608/GA 3 443 643 470 670 266

LQGK0808/GA 3 643 643 670 670 266

LQGK1008/GA 6 843 643 870 670 266

LQGK1208/GA 6 1043 643 1070 670 266

Accessories Description

LQGN Clamp nut for xing gland plates to frame

Top View

W1

W2

D1

D2

B&R Enclosures iLINQ Catalogue 2011 35For more information visit www.brenclosures.com.au/lqagp.htm

Gland Frame

Individual Plate

W1

D3

Side Plate

16

14


38/64

Metal mounting pans are manufactured from 3mm galvanised steel and are stiffened to support loads of up to 500kg. They are

depth adjustable in 25mm increments and can be installed using slides that locate the pan into the correct position for mounting

to the frame. Mounting pans can be mounted off any prole using the same mounting pan bracket and xings. In bayed

enclosure systems a mounting pan inll panel is available to ll the space between the mounting pans. The mounting pan inll

brackets can be mounted on either horizontal or vertical frame prole rails.

brenclosures.com.au/lqmp.htm

Mounting Pan

ount ng an eatures ene o suppor oa o o g

Depth adjustable

n pane ava a e or aye enc osures

a er a s

Body galvanised steel

hickness 3mm

rac e s z nc a oy

Inclusions (Mounting Pan)

Summetrical 3mm galvanised steel mounting pan

4 mounting brackets

All xings

Inclusions(InfllPanel)

Summetrical 3mm galvanised steel mounting pan

2 mounting brackets

All xings



39/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

Mounting Pan

Catalogue No.

Size Fixings

Height Width Height Width

H1 W1 H2 W2

LQMP1804 1675 275 1649 249

LQMP1806 1675 475 1649 449

LQMP1808 1675 675 1649 649

LQMP1810 1675 875 1649 849LQMP1812 1675 1075 1649 1049

LQMP2004 1875 275 1849 249

LQMP2006 1875 475 1849 449

LQMP2008 1875 675 1849 649

LQMP2010 1875 875 1849 849

LQMP2012 1875 1075 1849 1049

LQMP2204 2075 275 2049 249

LQMP2206 2075 475 2049 449

LQMP2208 2075 675 2049 649

LQMP2210 2075 875 2049 849

LQMP2212 2075 1075 2049 1049

MountingPanInfllPanel(for bayed systems)

Catalogue No.

Size

Height

H1

LQMF1801 1675

LQMF2001 1875

LQMF2201 2075

Mounting Pan Inll Panel

Front View

124

H1

Front View

W1

W2

H1

H2

B&R Enclosures iLINQ Catalogue 201 37For more information visit www.brenclosures.com.au/lqmp.htm

Side View

27

25

Side View


40/64

w ng rame eatures

u a e or moun ng equ pmen

Allows to equipment

u a e or oa s o o g w en

installed internally

Suitable for loads of o 80kg when

ns a e ex erna y

a er a s

Frame 76 38mmRHS

Thickness 2.5 mm

iLINQ swing frames are used to install 19" rack mounted equipment which allows access to both the front and rear without

having to remove or open cladding on the side or back of the enclosure. The swing frames are very robust, constructed from

76 x 38 x 2.5 mm RHS and are suitable for loads of up to 100kg when installed internally or 80kg when installed externally.

A horizontal swing frame rail set is required to mount the swing frame which are available in widths to suit the enclosure

(purchased seperately).

There are two mounting positions internal 135and external 180. The internal position is suitable for heavy equipment(100kg) and can be swung up to 135. The external position is rated to carry slightly lower weights (80kg), but swings out to a

full 180. This gives unrestricted access to the inside of the enclosure.

For 800mm and wider enclosures, a swing frame trim (refer to page 40) is available to suit installation of the swing frame in

either the centre, left or right sides. The trim consists of symmetrical panels, a single panel for the left or right hand installations

and two symmetrical panels for centre installation. The trim panels are constructed from 1.6mm zinc coated steel powdercoated

mist blue (white) gloss and are attached to the swing frame using the xings supplied.

Inclusions (19" Swing Frame)

Swing frame 2 x slotted turnbuckle locks

RU indicator tape

All xings

NOTE: Horizontal swing frame rails purchased separately

brenclosures.com.au/lqsf.htm

Swing Frames



41/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

Horizontal Swing Frame Rails

Catalogue No.

Width Fixing WidthTo Fit FrameWidth (mm)W1 W2

LQRF06 551 538 600

LQRF08 751 738 800

19" Swing Frame

Catalogue No.

HeightTo Fit FrameHeight (mm)H1 RU

LQSF36U 1694 1800 36

LQSF40U 1894 2000 40

LQSF45U 2094 2200 45

19" Swing Frame 135

Front View

497

H1

Side View

113

76

19" Swing Frame 180497

Front View

H1

Side View

113

76

22

Horizontal Swing Frame Rails

Front View

W1

20

Top View

105

W1

W2

B&R Enclosures iLINQ Catalogue 2011 39For more information visit www.brenclosures.com.au/lqsf.htm


42/64

w ng rame r ms

eatures Symmetrical pane s

Side mount or centre mount

Materials

nc coa e s ee

Thickness 1.6

Surface nish powdercoated

For enclosures 800mm and wider, a swing frame trim is available to suit the installation of a swing frame in either the centre, left

or right sides. The trim consists of symmetrical panels, a single panel for the left or right hand installations and two symmetrical

panels for centre installation. The trims are constructed from 1.6mm zinc coated steel powdercoated mist blue (white) gloss.

Trims are securely xed to the swing frame and help direct airow through the 19" rack mounted equipment. The trims also

assist to make the equipment mounted to the rear of the swing frame secure.

Inclusions (Centre Mount)

Symmetrical swing frame trims (2)

All xings

Inclusions (Side Mount)

Symmetrical swing frame trim

All xings

Note: Image shows centre mount trim

brenclosures.com.au/lqsft.htm

Swing Frame Trims



43/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

Swing Frame Trim - Side

Catalogue No.

HeightTo Fit Swing

Frame RUH1

LQSS36U08 1694 36

LQSS40U08 1894 40

LQSS45U08 2094 45

Front View Top View

Swing Frame Trims Centre (2)

Swing Frame Trims - Centre (2)

Catalogue No.

HeightTo Fit Swing

Frame RUH1

LQSC36U08 1694 36

LQSC40U08 1894 40

LQSC45U08 2094 45

Front View

Swing Frame Trim Side

Top View

H1

H1

207

99

99

207

B&R Enclosures iLINQ Catalogue 2011 41For more information visit www.brenclosures.com.au/lqsft.htm


44/64

19" ac a eatures

Rails are EIA-10-D compliant

Easy identifable RU positioning

Supplied as a pair

Square holes punched a RU

ncremen s

a er a s

Zinc coated steel

Thickness 2.0mm

19" rack rails are supplied as a pair (one left and one right) with all xings included and are made from 2mm zinc coated steel

powdercoated mist blue (white) gloss. The rails are EIA-10-D compliant with square holes punched at RU increments suitable

for standard rear access cage nuts.

Matrix rails are required to mount the 19 rack rails and are purchased seperately.

Inclusions

Left and right rails (2)

RU indicator tape

All xings

NOTE: Matrix rails purchased separately

19" Rack Rails

brenclosures.com.au/lqrr.htm



45/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

19" Rack Rails 600mm wide

H1


H1


Catalogue No.

HeightTo Fit FrameHeight (mm)

To Suit EnclosureWidth (mm)

#Min. No ofmatrix railsH1 RU

LQRR38U 1700 1800 600 38 3

LQRR42U 1900 2000 600 42 3

LQRR47U 2100 2200 600 47 3

# For matrix rails refer to pages 44 45.


Catalogue No.

HeightTo Fit FrameHeight (mm)

To Suit EnclosureWidth (mm)

#Min. No ofmatrix railsH1 RU

LQRR38U/800 1700 1800 800 38 3

LQRR42U/800 1900 2000 800 42 3

LQRR47U/800 2100 2200 800 47 3

# For matrix rails refer to pages 44 45.

B&R Enclosures iLINQ Catalogue 2011 43For more information visit www.brenclosures.com.au/lqrr.htm

Front View Front View


46/64

nterna a eatures

a r x a su a e or eav er

complex congurations, mountable in

direction

Prole Rails suitable for mounting

g er componen s

oor a s n o e s en ng rame

on he internal side of the door

Materials

Matrix Rail galvanised steel

Dimensions 19 1.6mm

Prole Rail zinc coated steel

mens ons . mm

25x18x1.6mm

oor a z n c coa e s ee Dimensions 9 18 1.6mm

Surface nish prole & door rail

powdercoated

A matrix rail is typically used for heavier or complex congurations. It can be mounted to the frame prole, to other rails and any

combination of frame and rails in any direction height, width or depth. Accessories and equipment can be tted to the matrix

rails by using front access cage nuts (M6 or M8) or M5 taptites at 25mm increments. Matrix rail is supplied in 21 sizes in 100mm

increments to suit standard iLINQ frame dimensions.

Prole rails are typically used to hold lighter items in the enclosure and it is suitable for front access cage nuts (M6 or M8) or

M5 taptites. The prole rail is self aligning and ts between the frame prole of the enclosure and is secured by M5 taptites. Theprole rails are available in both 25mm and 50mm sizes to suit all enclosure depths only.

A door rail is used for supporting any door mounted equipment and are secured to the door stiffener rail with M5 taptites. Door

rails are supplied in all door widths. Prole rails and door rails are powdercoated mist blue (white) gloss.

brenclosures.com.au/lqirs.htm

Inclusions (Matrix Rail)

Symmetrical matrix rail

Die cast ends (2)

All xings

Inclusions(ProfleRail)

Symmetrical prole rail

All xings

Inclusions (Door Rail)

Symmetrical door rail

All xings

NOTE: Front access cage nuts for all rails purchased separately (refer to page 17)

Internal Rail System (IRS)



47/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

Matrix Rail

Catalogue No.

WidthTo suit

Frame SizeW1

LQRM01 119

LQRM02 219

LQRM03 319 400

LQRM04 419 LQRM05 519 600

LQRM06 619

LQRM07 719 800

LQRM08 819

LQRM09 919 1000

LQRM10 1019

LQRM11 1119 1200

LQRM12 1219

LQRM13 1319

LQRM14 1419

LQRM15 1519

LQRM16 1619

LQRM17 1719 1800

LQRM18 1819

LQRM19 1919 2000

LQRM20 2019

LQRM21 2119 2200

Door Rail

Catalogue No.

Width FixingTo suit

Door WidthW1 W2

LQRD04 288 268 400

LQRD05 388 368 500

LQRD06 488 468 600

LQRD08 688 668 800

25mmProfleRail

Catalogue No.

Width FixingsTo suit

Frame SizeW1 W2

LQRP04/25 358 338 400

LQRP06/25 558 538 600

LQRP08/25 758 738 800

50mmProfleRail

Catalogue No.

Width FixingsTo suit

Frame SizeW1 W2

LQRP04/50 358 338 400

LQRP06/50 558 538 600

LQRP08/50 758 738 800

Front View

Matrix RailW1

75

25

Side View

22

Side View

18

Side View

25 mm Prole Rail

Front View

W1

W2

25

50 mm Prole Rail

W1

W2

Front View

50

18

Door Rail

Front View

W1

W2

25

Side View

18

Matrix Rail Detail

75

25

25

11

5.5

13

4.5

8

B&R Enclosures iLINQ Catalogue 2011 45For more information visit www.brenclosures.com.au/lqirs.htm


48/64

nge scutc eon

eatures Suitable for oa s of o g

Slotted cam locks (2)

ecesse an e

a er a s

Zinc coated steel

Thickness 1.6mm


The iLINQ hinged escutcheon is manufactured from 1.6mm zinc coated steel and is suitable for loads of up to 25kg. The

escutcheon is powdercoated mist blue (white) gloss. It is supplied with all xings necessary for installation onto the escutcheon

rail. Vertical hinged escutcheon rails are required when tting escutcheons.

To comply with IEC60529 IP2X specications, horizontal rails can be used. All escutcheon rails are powdercoated mist blue

(white) gloss.

brenclosures.com.au/lqhe.htm

Hinged Escutcheon

Inclusions (Matrix Rail)

Symmetrical Escutcheon

2 x turn slotted locks

All xings

NOTE: Vertical and horizontal escutcheon rails purchased separately



49/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

Hinged Escutcheon

Catalogue No.

Escutcheon Locking

Height Width Height Suits

H1 W1 H2 Height Width

LQHE1706 1700 500 1646 1800 600

LQHE1708 1700 700 1646 1800 800

LQHE1906 1900 500 1846 2000 600

LQHE1908 1900 700 1846 2000 800

LQHE2106 2100 500 2046 2200 600

LQHE2108 2100 700 2046 2200 800

Vertical Rail (2)

Catalogue No.

Height

H1 Suits Height

LQRV17 1758 1800

LQRV19 1958 2000

LQRV21 2158 2200

Escutcheon Vertical Rail (2) Horizontal Rail (2) Optional

Horizontal Rail (2)

Catalogue No.

Width

Suits WidthW1

LQRH06 505 600

LQRH08 705 800

Note: Horizontal rails required for IP2X applications.

W1 18

H1

W1

H1

"

"

H2

B&R Enclosures iLINQ Catalogue 2011 47For more information visit www.brenclosures.com.au/lqhe.htm

Front View Side View

Top View

Bottom View


50/64

nt t eatures

ecas p eces

Multiple xing points

eve ng ee

Easy access o he bottom of the

enclosure

Frontcladding

Option of solid vented

Access for pipe lifting

Option of 100mm 200mm high

Materials

Plinth feet ZA27 diecastn c a ng z nc coa e s ee

Thickness 1.2mm

Surface nish powdercoated

iLINQ plinths are designed to raise the enclosure off the oor to allow access to cabling. The plinth kit includes 4 diecast corner

feet (200mm high plinths use 8 corner feet) and 2 covers for the front and rear, 4 levelling feet and all xings. For vented plinth

applications use sufx /V when ordering.

Plinth cladding features 40mm pipe lifting access holes and plugs and are held in place with two M5 button head hex drive set

screws.

Plinth feet and covers are powdercoated textured matt black.

brenclosures.com.au/lqpk.htm

Plinth Kit

Inclusions

4 diecast corner feet on 100mm high plinths

8 diecast corner feet on 200mm high plinths

Levelling feet (4)

4 Plinth foot corner covers (8 required on 200mm high)

Front & rear cladding

All xings



51/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

100mm Plinth KitsCatalogue No Plinth Kits 100mm high Fixing Dimensions

Solid Vented H1 W1 W2 W3

LQP0104 LQP0104/V 100 396 372 199

LQP0106 LQP0106/V 100 596 572 399

LQP0108 LQP0108/V 100 796 772 599

LQP0110 LQP0110/V 100 996 972 799

LQP0112 LQP0112/V 100 1196 1172 999

200mm Plinth KitsCatalogue No Plinth Kits 200mm high Fixing Dimensions

Solid Vented H1 W1 W2 W3

LQP0204 LQP0204/V 200 396 372 199

LQP0206 LQP0206/V 200 596 572 399

LQP0208 LQP0208/V 200 796 772 599

LQP0210 LQP0210/V 200 996 972 799

LQP0212 LQP0212/V 200 1196 1172 999

Solid Plinth Kit

Vented Plinth Kit

Side View

H1

W1

Front View

H1

W1

Top View

W1

W3

Top View

W1

W2

W3

B&R Enclosures iLINQ Catalogue 2011 49For more information visit www.brenclosures.com.au/lqpk.htm


52/64

nt a ng eatures

asy o e o om o e

enclosure


Option of solid or vented

Option of 100mm 200mm high

Materials

Zinc coated steel

c ness . mm


Plinth cladding is available in 100mm and 200mm high options with 40mm pipe lifting access holes and plugs. Cladding is

manufactured from 1.2mm zinc coated steel and is powdercoated textured matt black.

Available in solid or vented options, the plinth cladding is held in place with two M5 button head hex drive set screws.

brenclosures.com.au/lqpc.htm

Plinth Cladding

Inclusions

Plinth cladding (1)

All xings



53/64

Introduction

SizeSelectionCharts

ProductInformation

TechnicalGuide

Plinth Cladding - 100mm highCladding 100 mm high

Catalogue No Height Width

Solid Vented H1 W1

LQPC0104 LQPC0104/V 111 277

LQPC0106 LQPC0106/V 111 477

LQPC0108 LQPC0108/V 111 677

LQPC0110 LQPC0110/V 111 877

LQPC0112 LQPC0112/V 111 1077

Plinth AccessoriesProduct Code Description

LQPF Die-cast corner foot kit (4)

LQPS02 Plinth stacking kit for 200 mm high plinths

Plinth Cladding - 200mm highCladding 200mm high

Catalogue No Height Width

Solid Vented H1 W1

LQPC0204 LQPC0204/V 211 277

LQPC0206 LQPC0206/V 211 477

LQPC0208 LQPC0208/V 211 677

LQPC0210 LQPC0210/V 211 877

LQPC0212 LQPC0212/V 211 1077

Solid Plinth Cladding

Vented Plinth Cladding

LQPF

Front View

H1

W1

Front View

H1

W1

B&R Enclosures iLINQ Catalogue 2011 51For more information visit www.brenclosures.com.au/lqpc.htm

LQPS02


54/64

nt ount ng ase

eatures Suitable for ns a a on a p pe ro ers


eavy u y

ron

Materials

Galvanised steel

c ness mm

Documents

Br Enclosures Ilinq Catalogue