Upload
vanque
View
215
Download
0
Embed Size (px)
Citation preview
Brady B-595 Indoor/Outdoor Vinyl Tape for the GlobalMark® Printer
www.bradyid.com
Size & Material Catalog Number
Size Material White Yellow Red Blue Green Black Brown Gold Gray Purple Orange Clear
4"x100' B-588 NewB-595
76542113109
76547113114
76552113119
76560113127
76556113123
76564113131
76568113135
76572113139
76576113143
76590113147
76594113151
97734113105
3"x100' B-588 NewB-595
76543113110
76548113115
––
––
––
––
––
––
––
––
––
––
2.25"x100' B-588 NewB-595
76544113111
76549113116
76553113120
76561113128
76557113124
76565113132
76569113136
76573113140
76577113144
76591113148
76595113152
97735113106
1.125"x100'B-588 NewB-595
76545113112
76550113117
76554113121
76562113129
76558113125
76566113133
76570113137
76574113141
76578113145
76592113149
76596113153
97736113107
0.5"x100' B-588 NewB-595
76546113113
76551113118
76555113122
76563113130
76559113126
76567113134
76571113138
76575113142
76579113146
76593113150
76597113154
97737113108
*B-595 parts available March 1, 2010. B-588 parts will be available while supplies last.
■■ Adherestopipes,walls,equipment--mostcleandrysurfaces■■ Conformstorough,curvedandhighlytexturedsurfaces■■ Standsuptogrease,oilandmostindustrialchemicals■■ 8–10yearoutdoordurabilityinaveragetemperaturesfrom-40ºFto180ºF
NEW B-595 Continuous Vinyl Tape
BeginningMarch1,2010,Brady’sleadingoutdoorgradevinylfortheGlobalMark®PrinterisbeingreplacedbyanewB-595vinyl.ThisnewvinylhasevenbetterperformanceandthemostaggressiveadhesiveeverofferedfortheGlobalmark®Printer–allatthesamepriceandrolllength.ThesenewB-595labelingsuppliesareidealforindoorandoutdoorfacilitylabels,including5Slabels,safetylabels,warninglabels,pipemarkers,arcflashlabels,equipmentlabels,andvisualworkplacelabels.
Withtheadvancedadhesiveandlow-shrinkconstruction,newB-595vinylisnowalsorecommendedfor“problemapplications”thatprovedifficultformosttypicalvinylmaterials:■■ More Aggressive Adhesive:B-595vinylwilladheretodifficultlowsurface
energyitems,including:PVCpiping,blow-moldedequipmentcases,ABSplastics,powder-coatedsurfacesandequipmentmadefromrecycledplastics.TheB-595materialalsoexcelsatstickingtohighlytexturedsurfacessuchaspaintedcinderblockwalls,finishedunevenwood,texturedplastics,rough-pipesandpaper-jacketedpipes.
■■ Lower Application Temperature:B-595vinylcanbeappliedat0ºFinsteadof40ºForabove(servicetempremains-40ºFto180ºF).
■■ Low-Shrink Vinyl:B-595vinyldiminishesunsightlybuildupofdustandgrimearoundthelabeledgethatistypicallyseenwithvinyllabels.Italsoreducesadhesivebuildupinprintermechanisms.
Visit www.bradyid.com/globalmark for more details on additional tapes for your
GlobalMark® Printer.
BradyWorldwide,Inc.6555W.GoodHopeRoadMilwaukee,WI532231-888-272-3946www.bradyid.com
BradyCanada355AppleCreekBlvd.Markham,ONL3R9X71-800-263-6179www.bradycanada.ca
©2010BradyWorldwide,Inc.AllRightsReserved
Size & Material Catalog Number
Size MaterialNFPA Diamond w/Text Area
NFPA Diamond Diamond Only
Color Bar w/Text Area
Color Bar Color Bar Only
Color Bar HMIG Format
NFPA Diamond NFR Label
21⁄4"x4" B-588(240/roll) NewB-595
76732115766
––
76730115767
––
––
––
4"x61⁄4" B-588(170/roll) NewB-595
76733115763
––
76731115764
––
––
––
4"x4" B-588(240/roll) NewB-595
––
76729115765
––
––
––
––
21⁄4"x21⁄4" B-588(365/roll) NewB-595
51860115772
51861115773
51854115771
76734115768
––
––
11⁄8"x3" B-588(300/roll) NewB-595
––
––
––
––
76735115770
76736115769
Catalog # Description
96089 4.11”x200’RTKBlackRibbon
■■ ColorBarorNFPA704Mdiamondformats■■ 4colordiamondorbarsarepre-printedsotheseonlyrequire1-color
printpass(black)throughprinter
■■ Pre-printedcontinuousstripeontopportionofwhitevinyl.
■■ IdealforprintingArcFlashlabelsandothersignsusingMarkware™Software
NEW Right-to-Know Pre-Print Labels For GlobalMark® Printer
NEW Pre-Print Header Stripe Labels For Arc Flash And Signs
Other Supplies Also Available for GlobalMark® Printer
Size & Material Catalog Number
Tape Size Stripe Width Material Red Stripe Orange Stripe Yellow Stripe
4"x100' 1" B-588 NewB-595
101948113161
101949113162
105045113163
3"x100' .75" B-588 NewB-595
101946113157
101947113158
105044113159
2.25"x100' .50" B-588 NewB-595
101944113155
101945113156
105043115774
Polyester Tapes
Phosphorescent Tapes
Reflective Tapes
Repositionable Tapes
Tag Stock Magnetic Stock
*B-595 parts available March 1, 2010. B-588 parts will be available while supplies last.
*B-595 parts available March 1, 2010. B-588 parts will be available while supplies last.
Special Black Ribbon Required For RTK Labels:Pre-PrintedRight-To-KnowLabelsrequiretheuseofribbonCatalogNumber96089.
Y1162974 MS1162974
Brady B-595 Indoor/Outdoor Vinyl Tape for the MiniMark™ Printer
www.bradyid.com
Size & Material Catalog Number
Size Material White Yellow Red Blue Green Black Brown Gold Gray Purple Orange Clear
4"x100' B-588 NewB-595
102976113182
102977113191
102978113196
102980113208
102979113204
102982113212
102985115759
102984115755
102983113218
102986113216
102981113200
102975113187
3"x100' B-588 NewB-595
102987113183
102988113192
––
––
––
––
––
––
––
––
––
––
2.25"x100' B-588 NewB-595
102964113184
102965113193
102966113197
102968113209
102967113205
102970113213
102973115760
102972115756
102971113219
102974113217
102969113201
102963113188
1.125"x100'B-588 NewB-595
102952113185
102953113194
102954113198
102956113210
102955113206
102958113214
102961115761
102960115757
102959115753
102962115751
102957113202
102951113189
0.5"x100' B-588 NewB-595
102940113186
102941113195
102942113199
102944113211
102943113207
102946113215
102949115762
102948115758
102947115754
102950115752
102945113203
102939113190
*B-595 parts available March 1, 2010. B-588 parts will be available while supplies last.
■■ Adherestopipes,walls,equipment--mostcleandrysurfaces■■ Conformstorough,curvedandhighlytexturedsurfaces■■ Standsuptogrease,oilandmostindustrialchemicals■■ 8–10yearoutdoordurabilityinaveragetemperaturesfrom-40ºFto180ºF
NEW B-595 Continuous Vinyl Tape
BeginningMarch1,2010,Brady’sleadingoutdoorgradevinylfortheMiniMark™PrinterisbeingreplacedbyanewB-595vinyl.ThisnewvinylhasevenbetterperformanceandthemostaggressiveadhesiveeverofferedfortheMiniMark™Printer–allatthesamepriceandrolllength.ThesenewB-595labelingsuppliesareidealforindoorandoutdoorfacilitylabels,including5Slabels,safetylabels,warninglabels,pipemarkers,arcflashlabels,equipmentlabels,andvisualworkplacelabels.
Withtheadvancedadhesiveandlow-shrinkconstruction,newB-595vinylisnowalsorecommendedfor“problemapplications”thatprovedifficultformosttypicalvinylmaterials:■■ More Aggressive Adhesive:B-595vinylwilladheretodifficultlowsurface
energyitems,including:PVCpiping,blow-moldedequipmentcases,ABSplastics,powder-coatedsurfacesandequipmentmadefromrecycledplastics.TheB-595materialalsoexcelsatstickingtohighlytexturedsurfacessuchaspaintedcinderblockwalls,finishedunevenwood,texturedplastics,rough-pipesandpaper-jacketedpipes.
■■ Lower Application Temperature:B-595vinylcanbeappliedat0ºFinsteadof40ºForabove(servicetempremains-40ºFto180ºF).
■■ Low-Shrink Vinyl:B-595vinyldiminishesunsightlybuildupofdustandgrimearoundthelabeledgethatistypicallyseenwithvinyllabels.Italsoreducesadhesivebuildupinprintermechanisms.
Visit www.bradyid.com/minimark for more details on additional tapes for your
MiniMark™ Printer.
BradyWorldwide,Inc.6555W.GoodHopeRoadMilwaukee,WI532231-888-272-3946www.bradyid.com
BradyCanada355AppleCreekBlvd.Markham,ONL3R9X71-800-263-6179www.bradycanada.ca
©2010BradyWorldwide,Inc.AllRightsReserved
■■ Pre-printedcontinuousstripeontopportionofwhitevinyl.
■■ IdealforprintingArcFlashlabelsandothersignsusingMarkware™Software
NEW Pre-Print Header Stripe Labels For Arc Flash And Signs
Other Supplies Also Available for MiniMark™ Printer
Size & Material Catalog Number
Tape Size Stripe Width Material Red Stripe Orange Stripe Yellow Stripe
4"x100' 1" B-588 NewB-595
103012113221
103010113222
102996113220
3"x100' .75" B-588 NewB-595
103013113225
103011113227
102995113226
2.25"x100' .50" B-588 NewB-595
110347113230
110348113228
110349113229
Self-Laminating Cable & Wire Markers Tamper-Resistant Metallized Polyester
*B-595 parts available March 1, 2010. B-588 parts will be available while supplies last.
Get the most out of your MiniMark™ Printer and B-595 Vinyl Tapes by using Markware™ Facility Identification Software. ■■ ForAllYourSafetyandFacilityIdentificationNeedsinOnePowerfulPackage.
■■ UseyourPCtoquicklydesignprofessionallookingsignsandlabels,orfreelycustomizelabellayoutstoyourownspecifications.ThenprintdirectlytoyourMiniMark™Printer!
Y1162975 MS1162975
Brady B-595 Vinyl Film With Permanent Adhesive
TDS No. B-595 Effective Date: 05-Feb-2010
Description:Brady B-595 indoor/outdoor marking film is a high gloss, durable, flexible, pressure sensitive adhesive product, designed for use in cartridge form with the GlobalMarkr® Industrial Label Maker and MiniMark™ Industrial Label Printer.
Details:Use:Brady-595 is used for Pipemarkers, Arrow Tape, Warehouse Marking, Warning Panels and Safety Signs, Arc Flash, Visual Workplace labels,
Special Properties:Permanent cold temperature applicable pressure sensitive acrylic
Substrate Type:Vinyl film
Standard Material Colors:White, red, yellow, green, blue, orange, black, gray, brown, gold, purple, clear.
Standard Legend Colors:Black, white, red, green, blue, and magenta
Thickness (PSTC-133): 0.004 in.(0.10 mm)
Adhesive Properties:Adhesion to Steel (PSTC-101) 15 Minute Dwell (Avg.) – 80 oz/in (87.5 N/100mm) Ultimate Dwell (72 Hrs.) 85 oz/in (93 N/100mm) Tack (ASTM D 2979) (Avg) 1100 g (10.5 N)
Adhesion to Powder Coated Metal (PSTC-101)15 Minute Dwell (Avg.) 60 oz/in (65 N/100mm)Ultimate Dwell (72 Hrs.) 75 oz/in (82 N/100mm)
Adhesion to Polypropylene (PSTC-101)15 Minute Dwell (Avg) 60oz/in (65 N/100mm)Ultimate Dwell (72 Hrs.) (Avg) 69 oz/in (75 N/100mm)Adhesion to Textured ABS (PSTC-101)15 Minute Dwell (Avg) 37 oz/in (40 N/100mm)Ultimate Dwell (72 Hrs.) (Avg) 40 oz/in (44 N/100mm)
Adhesion to Glass (PSTC-101)15 Minute Dwell (Avg) 82 oz/in (90 N/100mm) Ultimate Dwell (72 Hrs.) (Avg) 88 oz/in (96 N/100mm)
Note------Not recommended for Bare concrete or Unpainted Wood
Abrasion Resistance (Method 5306 of U.S. Federal Test Method Std. No. 191A):CS-10 wheels, 500 g wts.The printed legend withstands up to 250 cycles.
Gloss (ASTM D 523): 60 ° 50 Gardner Units minimum
Minimum Application Temperature:0°F (-18°C)
Service Temperature:-40°F to 180°F (-40°C to 82°C)
Average Outdoor Durability:8-10 years (Average expected outdoor life of product will depend on user definition of failure, climatic conditions, mounting techniques and material color.) Ribbon and material UV resistance does not represent ribbon wear. A polyester overlaminate is recommended for harsh environments - long term exposure to wind and rain.Chemical Resistance:
NE = No EffectNT = Not TestedF = Failed (affected Sample)
7 Day Immersion: Immersed in reagent for 7 days.Dip Test: Five 10 minute dips in reagent with 30 minute recovery.Rub Test: Rubbed sample for up to 100 rubs on Sutherland Ink Rub Tester
Shelf Life:1 year when stored at 70°F (21°C) and 40% to 50% R.H.
REAGENT 7 DAY IMMERSION DIP TEST Sutherland RUB TEST30% Sulfuric Acid NE NE NE10% Sulfuric Acid NE NE NE30% HCI NE NE NE10% HCI NE NE NE50% NaOH NE NE NE10% NaOH F NE FMethyl Ethyl Ketone F F FAcetone F F F10% Sodium Hypocholirite FMethanol F NE FIPA (Isopropanol) F NE NEASTM #3 Oil NE NE NESAE 20 Oil NE NE NEAlconox® NE NE NEToluene F F FMineral Spirits F F NEGlacial Acetic Acid F F NE5% Acetic Acid NE NE NEDiesel Fuel F F NEHeptane F NE NE 10% Ammonia NE NE FTurpentine F F NEKerosene F F NEWater NE NE FGasoline F F F
Trademarks:ANSI: American National Standards Institute (U.S.A.)ASTM: American Society for Testing and Materials (U.S.A.)Alconox® is a registered trademark of Alconox Co.Fed. Spec.: United States Federal Specification (U.S.A.)Globalmark® is a registered trademark of Brady Worldwide, Inc.HandiMark® is a registered trademark of Brady Worldwide, Inc.Labelizer® is a registered trademark of Brady Worldwide, Inc.MINIMARK™ is a trademark of Brady Worldwide, Inc.PSTC: Pressure Sensitive Tape Council (U.S.A.)Powermark™ is a trademark of Brady Worldwide, Inc.SAE: Society of Automotive Engineers (U.S.A.)
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.
WARRANTYBrady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under
no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.
Copyright 2009 Brady Worldwide, Inc. | All Rights ReservedMaterial may not be reproduced or distributed in any form without written permission.
Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289Y1162976 MS1162976© 2010 Brady Worldwide, Inc. All Rights Reserved
Material may not be reproduced or distributed in any form without written permission.
material color.) Ribbon and material UV resistance does not represent ribbon wear. A polyester overlaminate is recommended for harsh environments - long term exposure to wind and rain.Chemical Resistance:
NE = No EffectNT = Not TestedF = Failed (affected Sample)
7 Day Immersion: Immersed in reagent for 7 days.Dip Test: Five 10 minute dips in reagent with 30 minute recovery.Rub Test: Rubbed sample for up to 100 rubs on Sutherland Ink Rub Tester
Shelf Life:1 year when stored at 70°F (21°C) and 40% to 50% R.H.
REAGENT 7 DAY IMMERSION DIP TEST Sutherland RUB TEST30% Sulfuric Acid NE NE NE10% Sulfuric Acid NE NE NE30% HCI NE NE NE10% HCI NE NE NE50% NaOH NE NE NE10% NaOH F NE FMethyl Ethyl Ketone F F FAcetone F F F10% Sodium Hypocholirite FMethanol F NE FIPA (Isopropanol) F NE NEASTM #3 Oil NE NE NESAE 20 Oil NE NE NEAlconox® NE NE NEToluene F F FMineral Spirits F F NEGlacial Acetic Acid F F NE5% Acetic Acid NE NE NEDiesel Fuel F F NEHeptane F NE NE 10% Ammonia NE NE FTurpentine F F NEKerosene F F NEWater NE NE FGasoline F F F
Trademarks:ANSI: American National Standards Institute (U.S.A.)ASTM: American Society for Testing and Materials (U.S.A.)Alconox® is a registered trademark of Alconox Co.Fed. Spec.: United States Federal Specification (U.S.A.)Globalmark® is a registered trademark of Brady Worldwide, Inc.HandiMark® is a registered trademark of Brady Worldwide, Inc.Labelizer® is a registered trademark of Brady Worldwide, Inc.MINIMARK™ is a trademark of Brady Worldwide, Inc.PSTC: Pressure Sensitive Tape Council (U.S.A.)Powermark™ is a trademark of Brady Worldwide, Inc.SAE: Society of Automotive Engineers (U.S.A.)
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.
WARRANTYBrady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under
material color.) Ribbon and material UV resistance does not represent ribbon wear. A polyester overlaminate is recommended for harsh environments - long term exposure to wind and rain.Chemical Resistance:
NE = No EffectNT = Not TestedF = Failed (affected Sample)
7 Day Immersion: Immersed in reagent for 7 days.Dip Test: Five 10 minute dips in reagent with 30 minute recovery.Rub Test: Rubbed sample for up to 100 rubs on Sutherland Ink Rub Tester
Shelf Life:1 year when stored at 70°F (21°C) and 40% to 50% R.H.
REAGENT 7 DAY IMMERSION DIP TEST Sutherland RUB TEST30% Sulfuric Acid NE NE NE10% Sulfuric Acid NE NE NE30% HCI NE NE NE10% HCI NE NE NE50% NaOH NE NE NE10% NaOH F NE FMethyl Ethyl Ketone F F FAcetone F F F10% Sodium Hypocholirite FMethanol F NE FIPA (Isopropanol) F NE NEASTM #3 Oil NE NE NESAE 20 Oil NE NE NEAlconox® NE NE NEToluene F F FMineral Spirits F F NEGlacial Acetic Acid F F NE5% Acetic Acid NE NE NEDiesel Fuel F F NEHeptane F NE NE 10% Ammonia NE NE FTurpentine F F NEKerosene F F NEWater NE NE FGasoline F F F
Trademarks:ANSI: American National Standards Institute (U.S.A.)ASTM: American Society for Testing and Materials (U.S.A.)Alconox® is a registered trademark of Alconox Co.Fed. Spec.: United States Federal Specification (U.S.A.)Globalmark® is a registered trademark of Brady Worldwide, Inc.HandiMark® is a registered trademark of Brady Worldwide, Inc.Labelizer® is a registered trademark of Brady Worldwide, Inc.MINIMARK™ is a trademark of Brady Worldwide, Inc.PSTC: Pressure Sensitive Tape Council (U.S.A.)Powermark™ is a trademark of Brady Worldwide, Inc.SAE: Society of Automotive Engineers (U.S.A.)
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.
WARRANTYBrady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under
Brady Worldwide, Inc. 6555 W. Good Hope Road Milwaukee, WI 53223 1-888-272-3946 www.bradyid.com
Brady Canada 355 Apple Creek Blvd. Markham, ON L3R 9X7 1-800-263-6179 www.bradycanada.com
material color.) Ribbon and material UV resistance does not represent ribbon wear. A polyester overlaminate is recommended for harsh environments - long term exposure to wind and rain.Chemical Resistance:
NE = No EffectNT = Not TestedF = Failed (affected Sample)
7 Day Immersion: Immersed in reagent for 7 days.Dip Test: Five 10 minute dips in reagent with 30 minute recovery.Rub Test: Rubbed sample for up to 100 rubs on Sutherland Ink Rub Tester
Shelf Life:1 year when stored at 70°F (21°C) and 40% to 50% R.H.
REAGENT 7 DAY IMMERSION DIP TEST Sutherland RUB TEST30% Sulfuric Acid NE NE NE10% Sulfuric Acid NE NE NE30% HCI NE NE NE10% HCI NE NE NE50% NaOH NE NE NE10% NaOH F NE FMethyl Ethyl Ketone F F FAcetone F F F10% Sodium Hypocholirite FMethanol F NE FIPA (Isopropanol) F NE NEASTM #3 Oil NE NE NESAE 20 Oil NE NE NEAlconox® NE NE NEToluene F F FMineral Spirits F F NEGlacial Acetic Acid F F NE5% Acetic Acid NE NE NEDiesel Fuel F F NEHeptane F NE NE 10% Ammonia NE NE FTurpentine F F NEKerosene F F NEWater NE NE FGasoline F F F
Trademarks:ANSI: American National Standards Institute (U.S.A.)ASTM: American Society for Testing and Materials (U.S.A.)Alconox® is a registered trademark of Alconox Co.Fed. Spec.: United States Federal Specification (U.S.A.)Globalmark® is a registered trademark of Brady Worldwide, Inc.HandiMark® is a registered trademark of Brady Worldwide, Inc.Labelizer® is a registered trademark of Brady Worldwide, Inc.MINIMARK™ is a trademark of Brady Worldwide, Inc.PSTC: Pressure Sensitive Tape Council (U.S.A.)Powermark™ is a trademark of Brady Worldwide, Inc.SAE: Society of Automotive Engineers (U.S.A.)
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.
WARRANTYBrady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under