Brawler TiresFor all makes of skid steers

Brawler Tires

Say goodbye to flatsIf you rely on a skid steer in your business, then you know a skid steer is only as tough as its tires. A flat tire can happen all too easily and drive your work to a complete stop. Who can afford the downtime?

Now, there’s a new solution. Brawler Solid Flex tires are a completely different kind of tire that never, ever goes flat.With Solid Flex, you can say goodbye to flats forever.

Never change a flat

Brawler Solid Flex tires are made with their own super-strength rim, molded directly to the tire. The solid rubber tire and wheel form one ultra-strong unit. Constructed from a special tread compound that is abrasion, cut and chunk-resistant, they’re designed specifically for handling severe operating conditions. Since they’re made from solid rubber, they can’t go flat.

Enjoy a smoother ride

Solid Flex gives you a comfortable ride like pneumatic tires, but without the maintenance. The elliptical aperture design creates a cushioned spring-action that absorbs stress and softens the ride.

Avoid damaged wheel rims and extra work

When you run on Brawler Solid Flex tires, damaged wheel rims are unlikely. No special equipment is needed for mounting Solid Flex tires since they are molded right onto their own super-strength wheel rim.

Trust Solid Flex for all makes and models

Brawler Solid Flex tires are compatible with all major brands of skid steer equipment. They’re the only all-makes, solid rubber tire tested in John Deere skid steers and approved to John Deere standards.

Brawler® Solid Flex TiresFor all makes of skid steers

Reduce your cost-per-hourBy reducing your tire replacements and downtime, you’ll reduce your overall costs. Solid Flex gives you:

– Up to three times the tread depth of regular pneumatic and pneumatic foam-filled tires1

– Five-year warranty against defects in workmanship and material for the original useable tread depth, limited to 60 months from the date of purchase.

See your John Deere dealer for all applicationsBuilt with up to three times more tread depth than typical pneumatic tires,1 Brawler Solid Flex tires perform exceptionally well in heavy-duty service applications:

Dairies Scrap yards Feedlots Nurseries Poultry farms Rental fleet services Recycling centers

Solid Flex Tire Size Replaces Pneumatic Tire Size John Deere Part Number Bolt Hole Pattern Description Tread Depth Load-Carrying Capacity (Lbs.)

31 x 5 x 9 10 x 16.5 SW10165841 N/A Smooth Solid Flex 2.4-in. or 75/32nds2 5920

31 x 6 x 10 10 x 16.5 SW10165527L, 8 bolts, Traction Left & 2.0-in. or 64/32nds 6595 SW10165527R 8-in. center Right Hand

31 x 6 x 10 10 x 16.5 SW10166101L, 6 bolts, Traction Left & 2.0-in. or 64/32nds 6595 SW10166101R 6-in. center Right Hand

33 x 6 x 10 12 x 16.5 SW12165852 N/A Smooth Solid Flex 2.4-in. or 77/32nds2 7335

33 x 6 x 11 12 x 16.5 SW12165528L, 8 bolts, Traction Left & 2.4-in. or 77/32nds 7915 SW12165528R 8-in. center Right Hand

36 x 7 x 11 14 x 17.5 SW141756465L, 8 bolts, Traction Left & 2.8-in. or 90/32nds 8540 SW141756465R 8-in. center Right Hand

BRAWLER is a registered trademark of Maine Industrial Tire LLC. Additional tire sizes are available. See your John Deere Dealer for details.

Brawler Solid Flex tire typical pneumatic tire

BRAWLER Solid Flex Tires

1 Source: Maine Industrial Tire, LLC. Typical pneumatic tire tread depth ranges on average between 19/32nds and 24/32nds.The tread depth on Brawler Solid Flex tires ranges between 61/32nds and 90/32nds, depending on tire size.

2 Smooth tire tread depth reflects total wearable rubber thickness.

Solid Flex vs. Pneumatic and Foam-Filled Tires

# Service disposal was calculated by 4 mounts/dismounts at $20 plus $8 for disposal. Total $112 per replacement. * Flat repairs — on average, 8 flat repairs per year, for 3 years at a cost of $65 ($40 flat repair, $8 fuel surcharge,

$15 service call, and $2 incidentals [patches, valve stems, tubes]).**Downtime — based on 20 hours at a rate of $50 per hour. May vary based on customer and application.

April 2010

Pneumatic Foam-Filled Solid Flex Cost Hours Cost Hours Cost Hours

Cost for Tires (12 x 16.5) $900 500 $900 500 $3,400 1,500

Foam Filled $800

2 Replacement Sets $1,800 1,000 $1,800 1,000

2 Foam-Filled Installs $1,600

2 Service and Disposal Calls # $224 $224

Subtotal $2,924 $5,324 $3,400 1,500

Flat Repairs* $1,560 $0

Wheel Replacements $125 $125

Equipment Downtime** $1,000 $100

Total — Tire Expense $5,609 1,500 $5,549 1,500 $3,400 1,500

Tires Cost Per Hour $3.74 $3.70 $2.27

JohnDeere.com/AgParts

DSPB45398 Litho in U.S.A. (10-09)

You don’t have to own green equipment to get John Deere parts and service. Our dealers offer parts and service for all makes, so everyone can take advantage of John Deere quality and expertise.

We have parts available for more than two million applications for other brands and expert technicians who can service just about any machine. Because you deserve one stop, no matter how many brands you have in your field.

That’s the John Deere difference. See us today.

WE’RE HERE TOkEEP YOU ROLLINg,NO mATTER WHAT BRANDSYOU HAvE IN YOUR FIELD.