Brh Highpressurecontrolvalve g

8/4/2019 Brh Highpressurecontrolvalve g

http://slidepdf.com/reader/full/brh-highpressurecontrolvalve-g 1/16

December 1998 Product Flier PF51.2:HP

D102432X412

HighPressure Control

Valves

W6848

S Globe- and angle-style valves for high-pressure steam, hydro-carbon, or general service, including cavitating liquids or noisygases and vapors

S Temperatures to 537_C and pressures to PN 250 (Class 2500)and sizes from DN 25 through DN 150 DIN and 1 through 20 inch-es ANSI; balanced or unbalanced trim

S Increased pressure capabilities available (ANSI IntermediateStandard or Intermediate Special ratings). Many trim selectionsallow pressure drops up to the full valve rating.

S ENVIRO-SEALR and HIGH-SEALt packing systems to help en-sure compliance with environmental emissions requirements

S FIELDVUER

digital valve controllers offer digital control and re-mote diagnostics. The proven line of Fisher positioners, control-lers, transmitters, and switches also is available



2

Product Flier PF51.2:HP

These high-pressure valves areextremely rugged, single-port, cage-guided globe and angle valves for

applications in power, refining,hydrocarbon, chemical, and otherindustries.Select from several flowcharacteristics and trimtypes...linear, equal percentage,Micro-Flow, Micro-Flute, Cavitrol ® III

trim and Whisper Trim ® III noise-attenuating trim.

For Low-FlowRequirements...Micro-Flute and

Micro-Flow valve plugs provideexcellent control for applicationsrequiring a maximum C

vas low as

.354 for a 1-inch valve.

Cavitating Liquids...Two- andthree-stage Cavitrol III trims caneliminate cavitation noise anddamage in a valve that has beensized for the flow conditions. Thetrim is normally used wherepressure drop is up to 149 bar for

two-stage and 207 bar for threestage trim.

Liquid passes through cage orificesin each stage, undergoing a portionof the total required pressure drop.This partial pressure drop in eachstage of a properly sized valvenormally prevents the liquidpressure from falling to or below itsvapor pressure, eliminating theformation of vapor bubbles.

The High-Pressure Valve Family

Typical Globe Valve

W5815-1/IL

W5816-1/IL

Cavitrol ® III Three-Stage Trim (Typical F L

Coefficient for Two- or Three-Stage Trim is .98)

W5818-1/IL

Micro-Flute Valve Plug for Control of Low Flow Rates

W6020

Typical Angle Valve

Cavitrol ® III Trim for Control of Liquid

Cavitation

W3747



3


W2629

PTFE ENVIRO-SEAL® Packing System Graphite HIGH-SEAL™ Packing System

W5803-1* W5801-1*/IL

Noisy Gases andVapors...Whisper Trim III cagescan substantially reduce noise ingas, vapor, or steam applications.Whisper Trim III cages usemultiple orifices of a specialshape, size and spacing. Theorifices break up turbulent fluidstreams, reducing noise-producinginteractions. The trim is availablein several performance levels, andis used for various ratios ofpressure drop to inlet pressure(∆P/P

1).

Trims for Sour-Gas

Service...Trims can be furnishedfor compliance to NACE (NationalAssociation of CorrosionEngineers). If needed, chemicaland physical test data, heattreatment documentation,hardness test data, and acertificate of compliance to thespecification can be provided.

Protection Against ProcessFluid Emissions...Optional

ENVIRO-SEAL and HIGH-SEALpacking systems provide asuperior stem seal to prevent lossof valuable or hazardous processfluids. These live-loaded systemsprovide longer packing life andreliability.

IEC 534-4 and ANSI/FCI 70-2-1991 Class V Shutoff at HighTemperatures —With balanced C-seal trim, available in some

(larger) sizes permits Class Vshutoff with temperatures up to593°C.

The High-Pressure Valve Family

Whisper Trim ® III Cage--Performance

Level D1 or D3 for ∆P/P 1 Ratios up to 0.99

Whisper Trim ® III Cage--Performance

Level A1 - C3

W2041



4

Product Flier PF51.2:HPActuators and Accessories

W3387/IL

Type 657 or 667 Actuator

Actuators

Typen 657 andn 667 spring-returndiaphragm actuators are thestandard actuators for these valves.

Typen 585C and 585CR nType470 piston actuators are availablefor very high thrust requirements.n Series 490 piston actuatorsfeature high thrust and long travelsfor very large valves.nType 350andnType 323 electrohydraulicactuators permit valve operation inlocations where supply pressure airis difficult to supply.

Accessories

FIELDVUE ® Digital Valve

Controller...The controller isavailable mounted on the actuators.

Positioners andTransducers...Pneumaticpositioners and electro-pneumaticpositioners and transducers can beprovided with these actuators.

Position Transducers, SolenoidValves, and Limit Switches...Alsoavailable.

W6296

Type 585C or 585CR Pneumatic Piston

Actuator

W6701

FIELDVUE

®

Digital Valve Controller



5


Only a few of the more commonly selected product materials, sizes,options, and accessories are covered in this flier.

Contact your nearest sales office or sales representative (refer to the backcover) for assistance in selecting and sizing these products. More detailedspecifications are available on request.

Selecting Valve ComponentsValve Trim and Body Style .................................................................. 6End Connections and Valve Body Materials ........................................ 6Valve Plug, Seat Ring, and Cage (Trim) Materials ............................... 7Other Valve Parts ................................................................................ 8Temperature and Pressure Drop Summary .......................................... 8

SpecificationsTypical Actuator-Valve Size Combinations .......................................... 9Typical Actuator-Valve Dimensions and Weights ................................. 9Selected Flow Coefficients ................................................................ 10Conversion of Sizing Coefficients....................................................... 10

Selecting an Actuator and AccessoriesType 657 and 667 Pneumatic Diaphragm Actuators .......................... 11FIELDVUE ® Digital Valve Controller .................................................. 12Valve Positioners ............................................................................... 13

Other Accessories ............................................................................ 14

Reference InformationOrdering Information .......................................................................... 15Sales Offices and Sales Representatives .......................................... 16

Selecting High-Pressure Valves





7


Valve Plug, Seat Ring, and Cage (Trim) Materials

J404T04

D-Type Trim (Graphite Piston Ring Cage- Plug Seal)

S-Type Trim (No Cage-Plug Seal)T-Type Trim (Elastomeric Cage-Plug Seal)

W5951-1/IL W5952-1/ILW5816-1/IL

VALVE SIZE VALVEBODY

MATERIAL

VALVEPLUG

CAGE SEAT RING NOTESDIN Inches

DN 25 - 150 1 - 6

Steel

S416000(416

stainlesssteel)

S17400 (17-4PH

stainless steel)H1075

S41600 - - -

Many other

materials,including those for

sour service

(NACE MR0175),Whisper Trim III,

and Cavitrol III trimare available

CF8M

S316000

(316stainless

steel) withCoCr-A

hardfacingon seat and

guide

S31600 hardchrome coated

S31600 withCoCr-A on seat

For some valvetypes, seat ring

is solid R3 (alloy6).

For some types,cage is S31600

electrolized

- - - 8 - 14

Steel

S42000

(420stainless

steel)

CA6NM S17400 H1075 - - -

CF8M

S316000

with CoCr-A


guide

S31600

electrolized

Solid R0006 (alloy

6) - - -

- - - 20 WC9

CF8M withCoCr-A


guide

M152 s tainless

steel

S31600 withCoCr-A

hardfacing on seat- - - - - -



8


Temperature

In most applications, thetemperature limits for a control valveassembly are determined by a fewpart materials...Trim Type: Elastomeric plug-cage

seal, graphite plug-cage seal, or noplug-cage sealPacking Type: PTFE or graphiteValve Body Material: Varioussteel materials or CF8MGaskets and Seals: Graphite,metal, or elastomeric O-ring seals.Body-to-Bonnet Bolting: Steel or

Temperature and Pressure Drop Summary

stainless steel (strainhardened or annealed).

The following table includes asummary of the generaltemperature capabilities of

these valves. However, manyother parts (bolting, etc.) mustbe capable of withstanding theprocess temperature. Makeonly a preliminary selectionfrom this table. Always requestassistance from your salesoffice or sales representative

for selecting materials.Pressure Drop

For most of the selections in thisflier, pressure drops equal to thepressure-temperature ratings at lowtemperatures. As temperature

increases, the inlet pressure andpressure drop capabilites arereduced.Also, pressure drop is limited by thestrength of the actuator.Contact your sales office or salesrepresentative for assistance indetermining operating limits and inselecting an actuator.

Other Valve Parts (Sizes to DN 150 or 14 inches)

J404T05

PART MATERIALSTEMPERATURE

RANGE, °CNOTES

Body-to-bonnet bolting

Use forBody

Material:

Stud and Nut Material - - -

For DIN valves attemperatures below -10°C,contact your sales office or

sales representative.

SteelSA-193-B7steel studsSA-194-2H steel nuts

WCB, WCC, C5,WC9 Valves

-29 to 427

LCC Valves -46 to 343

CF8M

SA-193-B8M stainless steel studs (strain hardened)SA-194-2H steel nuts

-46 to 232

SA-193-B8M stainless steel studs (annealed)SA-194-8M stainless steel nuts

-198 to 537

Not applicable for all valvetypes. Contact your sales

office or salesrepresentative

Packing - - -

PTFE V-ring -40 to 232

- - -Graphite ribbon/filament-198 to 537 (to

371 for oxidizing

service)High-temperature graphite ribbon/filament for oxidizing

service371 to 593

ENVIRO-SEAL and HIGH-SEAL packing systems withPTFE, duplex, Kalrez, or graphite packing

Temperature limits vary with pressure andfugitive emissions standards; contact your

nearest sales office or sales representative forinformation

Gaskets- - -

Depending on valve type and size, gaskets are eithersilver-plated N04400 (Monel) or a combination of

graphite with either stainless steel or Inconel

Temperature capabilities as low as -254°Cand as high as 593°C (427°C in oxidizing

service) are possible. Contact your sales officeor sales representative

Piston ring for D-typetrim

- - -

Graphite in oxidizing service17F2717F39

-254 to 427-254 to 537

- - -

Graphite in non-oxidizing service17F2717F39

-254 to 254-254 to 593

- - -

Seal ring for T-typetrim

- - - Standard moly-filled PTFE with alloy backup ring -17 to 232 - - -



9


J404T07

J404T08

Typical Actuator-Valve Size Combinations, Weights, and Dimensions

Shown are common sizes ofdiaphragm actuators that will matewith the valves. Ability of theactuator to operate the valvesdepends on size, operatingpressure, and valve pressure drop.

Contact your nearest sales officeor sales representative for sizingand selection.

Temperature and Pressure Drop Summary (Continued)

J404T01

C

E

A

VALVE SIZE

SPRING-RETURNPNEUMATICDIAPRAGMACTUATOR

DIN INCHES Type 657 or 667

DN 25 -80

1 - 3 Size 40, 45, or 46

DN 100,150

4, 6 Size 50, 60, or 70

- - - 8 - 14 Size 100

- - - 20 Size 100

Representative Dimensions (mm) and Weights (kg) with Standard Bonnet and Stem Diameter. For

Information Only; Do Not Use for Planning an Installation

VALVE

SIZE DIMENSION A

DIAPHRAGM

ACTUATOR

DINANSI,Inches

DIN ANSIDim.

CDim.

E

Weightwith

Valve

DN 25DN 50DN 80DN 100DN 150

12346

269344424489691

292375442511714

473473473473473

91992094810841149

97107152356510

- - -- - -- - -- - -

8101214

- - -- - -- - -- - -

1137116817151727

729729729729

2559255925772577

2244244444444444

For Sizes to DN 150 DIN and 4 Inches ANSI Only

TrimType

Plug-CageSeal

Packing Body Material

TemperatureCapability of Valve

Assembly withStandard Materials,

°C

Notes

T PTFE

PTFELCC steel and

CF8M

Other steel

-40 to 232-29 to 232 For DIN valves at

temperatures below-10°C, contact yoursales office or sales

representative.Limit graphitepacking and

gaskets to 371°C in

oxidizing serviceCF8M valves canbe used from -198

to 537°C wi thoptional materials

WC9 and C5 valves

can be used to 599

°C wi th optionalmaterials

GraphiteLCC steel and

CF8M

Other steel

-46 to 232-29 to 232

D Graphite

PTFE

LCC steel and

CF8MOther steel

-40 to 232-29 to 232

Graphite

LCC steel

WCB, WCC, WC9CF8M

-46 to 343

-29 to 427-46 to 427

S None

PTFE

LCC steel and

CF8MOther steel

-40 to 232-29 to 232

Graphite

LCC steel

WCB, WCC, WC9CF8M

-46 to 343

-29 to 427-46 to 427



10

Product Flier PF51.2:HPSelected Flow Coefficients

H417T09

Following are conversions for use with common sizing equations.

KV

= (0.865) CV

C1

= 39.76(√XT)

Cg

= CVC

1

Km

= FL

2

CS

= = 1/20 (Cg). C

sis only applicable for inlet pressures up to 70 bar(a).

Conversion of Sizing Coefficients

VALVE SIZEPORTDIA.

MAXIMUMTRAVEL

LINEAR EQUAL PERCENTAGE

Valve Opening, Percent of Total Travel

10 30 70 100 100 10 30 70 100 100

DIN Inches mm mm CV FL CV FL

Class 900 & 1500 D & T Trim (Design HPD & HPT) Flow Down

5080100150

2346

47.673.092.1

136.5

38505076

- - -- - -6.918.78

12.531.554.7149

43.0101165385

52.2121201425

.91

.93

.91

.91

- - -- - -3.123.90

3.264.2113.923.1

26.453.290.6156

41.092.7165319

.93

.92

.85

.82

XT

- - - XT

- - -

5080

100150

23

46

47.673.0

92.1136.5

3850

5076

- - -- - -

.327

.763

.632

.580

.576

.544

.780

.795

.673

.721

.695

.773

.726

.726

- - -- - -

- - -- - -

- - -- - -

.676.961

.619

.761

.524

.615

.633

.661

.463

.496

.791

.768

.683

.593

- - -- - -

- - -- - -

Class 900 & 1500 D & T Trim (Design EHD & EHT) Flow Down

CV

FL

CV

FL

- - -- - -

8 &1012 & 14

177.8254.0

76102

105211

332593

7881460

10201970

.82

.8032.581.3

85.3207

334752

7551570

- - -- - -

XT

- - - XT

- - -

- - -- - -

8 &1012 & 14

177.8254.0

76102

.591

.443.661.669

.624

.662.592.629

- - -- - -

.969

.689.842.579

.641

.647.639.596

- - -- - -

Class 2500 D & T Trim (Design EHD & EHT) Flow Down

CV

FL

CV

FL

- - -- - -

8 &1012 & 14

136.5177.8

6476

75.1104

212369

495804

6211030

.82

.8119.838.4

50.388.0

210360

484800

.82

.81

XT

- - - XT

- - -

- - -- - -

8 &1012 & 14

136.5177.8

6476

.772

.406.840.478

.729

.552.688.584

- - -- - -

.584

.727.697.736

.702

.552.683.553

- - -- - -

Class 900 & 1500 S Trim (Design HPS) Flow Up

CV

FL

CV

FL

5080

23

47.673.0

3850

- - -- - -

11.730.6

47.5111

54.6127

.98

.96- - -- - -

3.044.08

26.753.7

45.8101

.92

.88

XT

- - - XT

- - -

5080

23

47.673.0

3850

- - -- - -

.681.636

.718

.734.711.739

- - -- - -

- - -- - -

.670

.821.598.641

.652

.730- - -- - -



11


H417T16

These heavy-duty actuators featurespring-return action and a varietyof operation options and actuator-mounted accessories.

The actuator can be used for on-offor throttling service, with or withouta positioner.

The Type 657 is air to close, andthe Type 667 is air to open.

Options...n Adjustable travel stop,n top-mounted handwheel, and nside-mounted manual actuator.

Specifications...Refer to thefollowing table and the actuator-valve selection tables.

Accessories...Refer to thefollowing pages for n pneumaticand electro-pneumatic valvepositioners,n FIELDVUE digital valvecontrollers, and n positiontransmitters.

Type 657 and 667 Pneumatic Diaphragm Actuators

Type 657 and 667 Actuator Speci fications

ACTUATORSIZE

NOMINALOPERATING

PRESSURE RANGES

MAXIMUMCASING

PRESSURE,BAR

MAXIMUMTHRUST,

N

AMBIENTTEMPERATURES,

°CMATERIALS

APPROXIMATEWEIGHT, kg

Bar PsigType657

Type667

Type657

Type667

30

0.2 to 1.0or 0.4 to

2.0

3 to 15 or6 to 30

9.6 7.610 321

Nitrile: -40 to 82Silicone: -50 to 149

Diaphragm: Nitrile

(standard) orsilicone elastomers

Yoke: Cast iron(standard) or steel

Diaphgram Plate:Aluminum is

standardOther Major MetalParts: steel or cast

iron with bronzeseal bushing

16 15

34 5.2 6.2 22 22

40 5.2 6.2 12 010 23 23

45 4.1 5.2 25 132 37 41

46 3.4 4.5 33 584 49 55

50 4.1 5.2 25 131 42 43

60 3.4 4.5 30 246 53 55

70 4.5 4.1 39 142 107 115

80 4.1 4.1 63 392 234 284

100 7.9 7.9 200 160 346 544

W0363-1



12


FIELDVUE ® Digital Valve Controller on a

Type 657 or 667 Actuator

W6701

FIELDVUE ® Digital Valve Controller

FIELDVUE digital valve controllersare communicating,microprocessor-based controllersthat convert a current signal to apressure signal to operate theactuator. Through the HART® communications protocol, thecontroller gives easy access toactuator-valve information that iscritical to process operation.

The Type DVC5010 controller isavailable to mount on sliding-stemactuators.

ValveLink™ Software...ValveLink software allows easyaccess to the information availablefrom the FIELDVUE controller. Thesoftware provides diagnostic

information such as dynamic errorband and step response on easy-to-interpret screens.

Access to diagnostics is through aModel 275 HART communicator or

a personal computer usingWindows™ software.

Options...Process PID, auto-calibrate (AC) for automaticcalibration and ease of installation,advanced diagnostics (AD), andpressure gauges.

CE Mark...The Type DVC5010 hasthe CE Mark to EMC Directive(electromagnetic compatibility): It

meets the requirements of EN50081-1 (emissions for lightindustry) and EN 50082-2 (immunityfor industrial environment).

H472T02

H415T02

H410T07

FIELDVUE Valve Controller Physical Specifications

SUPPLY PRESSURE, BAROUTPUTSIGNAL

STEADY-STATE

AIRCONSUMPTION,

Nm3/h

TEMPERATURELIMITS

WEIGHT HOUSINGMinimum andRecommended

Maximum

As needed by

actuator6.5

Up to 95%of supplypressure

Less than 0.3 at1.4 bar supply

pressure-40 to 80°C 2.7 kg

IP 65 per IEC 529

classification

Digital Controller Electrical Specifications

ELECTRICAL INPUT

REVERSEPOLARITY

PRORTECTION

Point-to-Point ConnectionMulti-Drop

Connection

Analog InputSignal

Minimum VoltageAvailable atInstrument

Terminals

MinimumControlCurrent

MinimumCurrent withoutMicroprocessor

Restart

MaximumVoltage

OvercurrentProtection

InstrumentPower

4 to 20 mA dc

nominal

Analog Control:11.5 Vdc

HARTCommunication:

12 Vdc

4.0 mA 3.5 mA 30 Vdc

Input circuit limitscurrent to preventinternal damage

(hardware revisions4 and 5 only)

12 to 30 Vdc atapproximately 8

mA

No damageoccurs from

reversal of loopcurrent

Digital Controller Cert if icat ions

I N TR I N SIC S A FETY

INTRINSICSA FETY O R

N O N - I N C EN D I -V E

F LAM E P R O OF D IV IS IO N 2EXPLO SI O N -

P R O O F

LC IE C S A (1) or FM (1) S A A C E NE L E C S A A C S A F M C S A or F M

EE x ia IIC T5

Class I, Division1, Groups (1) A ,

B, C, D T5 (Tam b

80°C)

Ex n IIC T5, T6Ex ia IIC T4, T5,

T6

EEx d IIB +H

2T5

(Tam b

80°C )

Ex d IIB +H

2T6

(Tam b

80°C)

Class 1 Div is ion2, Groups A, B ,C, D C lass 2 ,

Div is ion 2,Groups E , F, G

Class 1 Div is ion2, Groups A, B,C, D C lass 2 ,

Div is ion 2,Groups F, G

Class I, Division1, Groups B, C ,

D C lass II,Div is ion 1,

Groups E , F, G

1. Contact your nearest sales off ice or sales representative for the appropriate FM entity ratings and CSA parametric ratings foreach group.



13

Product Flier PF51.2:HPValve Positioners

Type 3582 and 3582i Valve Positioners (for Type 657 and 667 Actuators)

The Type 3582 pneumatic and3582i electro-pneumatic valvepositioners are accurate, efficientpositioners for use with Type 657and 667 actuators.

The field-proven design is fast torespond to input signal changesand is able to withstand thevibrations of most plants.

W5500

Options...nGauges and n bypassvalve for direct-acting positioners

using full input signal range.CE Mark...This product has the CEMark to EMC Directive(electromagnetic compatibility):n EN 50081 n EN 50082 Namurrecommendations--increasedlevels (refer to the table for othercertifications)

H411T11

H411T10

H411T12

Type 3582 and 3582i Positioner Specifications

Type Input Signal Supply PressureInput

BellowsRating

OperativeTemperature

WEIGHT Connections

3582n 0.2 to 1.0 or

n 0.4 to 2.0 bar

n 3 to 15 or n 6 to 30

psig

0.3 bar above theactuator requirement up

to 3.4 bar maximum2.4 bar -40 to 71°C 2.5 kg

Pressure and VentConnections: 1/4-inch

NPTType 3582i Conduit:

1/2 NPT3582i

4 to 20 mA constant current with30 Vdc maximum compliance

voltage; equivalent circuit is 120ohms shunted by three 5.6 V

zener diodes

0.3 bar above theactuator requirement up

to 3.4 bar maximum- - - -40 to 71°C 3.6 kg

Type 3582 and 3528i Capacities and Housing

SUPPLYPRESSURE,

BAR

SUP PLY AIRDEMAND, Nm3/h

AIR CONSUMPTION, Nm3/hHOUSING

Type 3582 Type 3582i

1.4 4.7 0.38 0.42 IP 5 4 pe r IEC 529 classification (weatherproof);vent should be on the side or bottom for

weatherproof applications2.0 7.0 0.48 0.53

2.4 8.1 0.54 0.59

Type 582i Certifications

INTRINSIC SAFETY OR NON-

INCENDIVE

INTRINSIC

SAFETY OR NON-INCENDIVE FLAMEPROOF DIVISION 2

EXPLOSION-

PROOF

PTB CSA(1)or FM(1) SAA LCIE SAA CSA FM CSA or FM

EEx ia IIC T6Class I, Division 1,Groups(1) A, B, C,

D T5

Ex ia IIC T4Ex n IIC T4

EEx dIICT6

Ex d IIB T6

Class I Division 2,Groups A, B, C, DClass III, Division 2,

Groups E, F, G

Class I Division 2,Groups A, B, C, DClass II, Division 2,

Groups F, G

Class I, Division 1,Groups A, B, C, DClass II Division 1,

Groups E, F, G

1. Contact your nearest sales office or sales representative for the appropriate FM entity ratings and CSA parametric ratings for each group.



14

Product Flier PF51.2:HPOther Accessories

Type 3065 Limit Switch Box (for Type 657 and 667 Actuators)

The limit switch box can beinstalled on the actuator to hold

proximity or microswitches, whichcan turn on an alarm or displaydevice when a pre-set limit isreached. Additional microswitchesare available.

The device has separate cams foropen and closed positions, andadjustment of one cam does notaffect the other.

Certifications...CE Mark to EMCdirective n EN 50081 and

n EN 50082

Self-Adjusting...Complicatedadjustments are not required.

StandardizedInstallation...Covered by IEC534-6 (NAMUR). The box can besupplied with a mounting kit.

W6682B

H411T08

Other Accessories

Type 67AFR Filter-Regulator...TheType 67AFR provides constantlycontrolled supply pressure toactuator accessories system. Thisregulator features an internal filterand limited-capacity internal relief,allowing partial reduction ofdownstream pressure.

Type 3583 Pneumatic PositionTransmitter...Provides a standardpneumatic signal that is proportionalto valve plug position. The outputsignal can operate remote indicatingdevices.

Type 646 or 846 Electro-Pneumatic Transducers...Thesetransducers convert a standard 4 to

20 mA dc signal to a proportionalpneumatic signal.

Type 2625 Volume Booster...Thevolume booster can be used inconjunction with a postioner toincrease actuator stroking speed.

Type 3065 Limit Switch Specifications

HOUSING

Makrolon plastic or aluminum housing

-40 to 80°C ambient temperature for housing

DIN 40 050-IP65 housing enclosure

SWITCHES

Type EI - S inductive proximity switch, slot shapedEEx ia IIC T6

Type EI - Z inductive proximity switch, cylindrical shapedEEx ia IIC T6

P & F Model SJ3.5 N or SN P & F Model NJ 2-11-N-G or SN-G

-25 to 75°C (N)-40 to 100°C (SN)DIN 40 050--IP 67

-25 to 100°C (N-G)-25 to 100°C (SN-G)

DIN 40 050--IP 68

Rating voltage is 8 V = (Ri ~ 1k)

Operating voltage is 5 - 25 V

Power input is > 3 mA with active surface uncovered; < 1mA with active surface coveredType EM Microswitch

Type EM-Ex microswitchEEx d IIC T6

Burgess V4NT7AR1 Bartec 07-2501-6-30/63

-40 to 80°CDIN 40 050--IP 54

-25 to 70°CDIN 40 050--IP 54

Alternating current switching capacity at 125 or 250 V:5.0 A resistive load0.5 A light-bulb load5.0 A inductive load

Alternating current switching capacity at 125 or 250 V:7.0 A resistive load0.5 A light-bulb load5.0 A inductive load

Direct current switching capacity:5 A at 30 V or 0.25 A at 250 V resistive load

2 A (opening) and 1.5 A (closing) at 30 V light-bulb load

0.1 A (opening) and 0.2 A (closing) at 250 V light-bulb load3 A at 30 V or 0.03 A at 250 V inductive load

Direct current switching capacity:10 A at 15 V or 0.25 A at 250 V resistive load

2 A at 15 V or 0.2 A at 250 V light-bulb load10 A at 15 V or 0.03 A at 250 V inductive load



15

Product Flier PF51.2:HPOrdering Information

H410T11

When ordering, please specify...

Application

Type of ApplicationThrottling or on-off

Reducing or relief

Controlled Fluid

Include chemical analysisof fluid if possible

Specific gravity

Fluid Temperature

Inlet Pressures

Minimum

Normal

Maximum

Pressure Drops

Minimum flowing

Normal flowing

Maximum flowing

Maximum at shutoff

Flow

Minimum controlled

Normal

Maximum

Maximum Permissible Noise Level, if Critical

Shutoff Classification Required

Line Size, Schedule, and End Connection Type

Valve, Actuator, and Accessories

From this or other product flier, select your choice whereever a choice is offered. If you cannot find the selectionyou need, contact your nearest sales office or salesrepresentative.



In other areas:

Marshalltown, Iowa 50158 USASao Paulo 05424 BrazilSingapore 128461

The contents of this publicat ion are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicabilit y. We reserve the right to

modify or improve the designs or specifications of such products at any time without notice.

For More Information, Contact...

© Fisher Controls International, Inc. 1997; All Rights Reserved

This product may be covered by one or more of the following patents: 5,129,625; 5,131,666; 5,056,757; 5,230,498; and 5,299,812 or under pending patents. Cavitrol, ENVIRO-SEAL, FIELDVUE, FloVue, Fisher,Fisher-Rosemount, HIGH-SEAL, M anaging The Process Better, ValveLink, and Whisper Trim are marks owned by Fisher Co ntrols Internati onal, Inc. or Fisher-Rosemount Systems, Inc. HART ismark owned by The HART Communications Foundation, Inc. All other marks are the property of their respective owners.


:WEB site:www .frco.com/fisher

AUSTRIAFisher-RosemountIndustrie - Zentrum No SudStraße 2a, obj M29A- 2351 Wr. Neudorf)

+43.2236.6073 +43.2236.60744

BELGIUMFisher-RosemountDe Kleetlaan 4B-1831 Diegem) +32.2.716.77.113 +32.2.725.83.00

BULGARYProcess ControlTzarichina Str.1BG- 1505 Sofia) +359.2.70.35.493 +359.2.75.91.43

CISFisher-RosemountMalaya TrubetskayaStreet 8 - 11th floorCIS-119881 Moscow) +7.095.232.69.683 +7.095.232.69.70

CROATIAFisher-RosemountBerny CommerceZagorska 2710000 Zagreb) +385.1.305.071.

3 +385.1.33.59.25

CZECH RepFisher-RosemountV olsinách 75Cz- 100 97 Praha 10) +420.2.810.026 663 +420.2.810.026.70

DENMARKFisher-RosemountHejrevang 11DK-3450 Allerød) +45.48.17.03.333 +45.48.17.02.44

FINLANDOy Valmet-RosemountSinimaentie 10BFIN - 02630 Espoo) +358.9.523.5003 +358.9.523.997

FRANCE and FRENCH

SPEAKING AFRICAFisher-Rosemount1 rue TraversièreSilic 125F- 94523 Rungis) +33.01.49.79.73.003 +33.01.49.79.73.99

GERMANY

Fisher-GuldeMannheimerstr. 63D-67071 Ludwigshafen) +49.0621.6811.03 +49.0621.6811.359

GREECE

T.C.B.44, Pentelis str.GR-17564 Faliro-Athens) +30.1.80.33.6523 +30.1.80.33.819

HUNGARY

Fisher-RosemountErsébet Királyné útja 1/cHu- 1146 Budapest) +36.1.343.02.033 +36.1.343.01.73

ITALY

Fisher-RosemountVia dell' Artigianato 8/12I-20053 Muggió (Mi)) +39.2.278.05903 +39.2.270.2302

NORWAYSolberg & AndersenPostboks 34 BrynN - 0611 Oslo) +47.22.63.57.003 +47.22.65.73.03

NETHERLANDS

Fisher-RosemountPatrijsweg 140NL-2289 EZ Rijswijk) +31.70.413.66.66

3 +31.70.390.68.15

POLANDFisher-Rosemount

Al. Wilanowska 272

PL- 02665 Warszawa) +48.22.85.73.7663 +48.22.85.73.856

PORTUGALFisher-RosemountRua Alfredo da Silva 8P-2720 Alfragide) +351.01.471.28.8503 +351.01.472.88.55

ROMANIA

Fisher-Rosemount RomaniaCalea Floreasca No. 91-11BL. F1, Tronson 5. AP.44Sector 1RO-71401 Bucharest) +40.1.230.41.493 +40.1.230.05.01

SLOVAK RepFisher-RosemountHanulova 5/bSR- 84101 Bratislava) +421.07.787.8113 +421.07.787.245

SLOVENIAMIRStrmeckijeva 16Sl-8270 Krsko) +386.608.231.4703 +386.608.231.471.

SPAIN

Fisher-RosemountCtra Fuencarral-AlcobendasKm 12.2; Edificio Auge 1E-28049 Madrid) +34.1.358.91.413 +34.1.358.91.45

: [email protected]

SWEDEN

peabIlanda GårdS - 65350 Karlstad) +46.54.53.07.50

3 +46.54.53.18.51.

SWITZERLAND

Fisher-RosemountBlegistr. 21CH-6341 Baar) +41.41.768.61.113 +41.41.761.87.40

TURKEY

Fisher-RosemountSti TophaneliogluCad 28/5FAltunizade 81130TR- Üsküdar - Istanbul)

+90.216.492.40.423 +90.216.492.40.47

UKRAINEFisher-RosemountTereschenkovskaya St. 13,Rm. 58252004 Kiev) +38.44.246.46.563 +38.44.246.46.58

UNITED-KINGDOM and

MIDDLE EASTFisher-RosemountKnight Road, StroodRochester, Kent ME2 2EZGB) +44.1634.73.60.003 +44.1634.736.655

Documents

Brh Highpressurecontrolvalve g