British Standard List

BS 6339 ........................................................12, 25BS 7772 ..............................................................16BS 7780 ........................................................16, 24BS 7839 ........................................................17, 24DD CEN/TS 15656 ..............................................18BS EN 81 ............................................................19BS EN 267 ............................................................8BS EN 453 ..........................................................20BS EN 632 ....................................................11, 24BS EN 869 ..........................................................20BS EN 1057 ........................................................20BS EN 1495 ........................................................20BS EN 1676 ..........................................................8BS EN 1706 ........................................................10BS EN 1713 ..................................................14, 24BS EN 1870 ........................................................21BS EN 2240 ........................................................10BS EN 2863 ........................................................10BS EN 2954 ........................................................10BS EN 3226 ........................................................11BS EN 3227 ........................................................11BS EN 3537 ........................................................11BS EN 3538 ........................................................11BS EN 3539 ........................................................11BS EN 3660 ........................................................11BS EN 3753 ........................................................11BS EN ISO 3908 ............................................11, 24BS EN ISO 4254 ............................................11, 24BS EN 4474 ........................................................11BS EN 4632 ........................................................11BS EN 4662 ........................................................11BS EN ISO 4945 ............................................11, 23BS EN ISO 5821 ............................................11, 24BS EN 6069 ........................................................11BS EN ISO 9445 ............................................11, 24BS EN 10283 ......................................................11BS EN 12062 ................................................14, 24BS EN 12663 ......................................................12BS EN 12864 ......................................................21BS EN 12965 ......................................................21BS EN 13001 ......................................................21BS EN 13322 ................................................19, 23BS EN ISO 13351 ..........................................12, 25BS EN 13418 ......................................................21BS EN 14910 ......................................................21BS EN 15056 ......................................................21BS EN 15622 ......................................................14BS EN ISO 17635 ..........................................14, 24BS EN ISO 20815 ................................................14BS EN ISO 23279 ..........................................14, 24BS EN 23908 ................................................11, 24BS EN 25821 ................................................11, 24BS ISO 3547 .......................................................22BS ISO 3548 .......................................................16BS ISO 3780 .................................................16, 26BS ISO 4251 .................................................16, 26BS ISO 6194 .................................................16, 24BS ISO 6550 .......................................................16BS ISO 6580 .................................................12, 25BS ISO 7612 .......................................................17BS ISO 10191 ...............................................17, 26BS ISO 10679 .....................................................17BS ISO 10911 ...............................................17, 24BS ISO 11929 ...............................................17, 25BS ISO 12188 .....................................................17BS ISO 12214 .....................................................17BS ISO 16110 .....................................................17BS ISO 16750 .....................................................17BS ISO 16992 .....................................................17

BS EN 50290 ......................................................14BS EN 50364 ......................................................14BS EN 50366 ......................................................19BS EN 50397 ......................................................14BS EN 50411 ......................................................15BS EN 55015 ......................................................19BS EN 60079 ................................................24, 25BS EN 60318 ................................................15, 24BS EN 60335 ..........................................15, 19, 22BS EN 60384 ........................15, 19, 20, 23, 24, 25BS EN 60630 ......................................................22BS EN 60730 ................................................15, 22BS EN 60745 ................................................15, 24BS EN 60809 ......................................................22BS EN 61010 ......................................................22BS EN 61029 ......................................................15BS EN 61051 ................................................20, 25BS EN 61280 ......................................................15BS EN 61300 ................................................15, 23BS EN 61347 ......................................................22BS EN 61557 ......................................................24BS EN 61753 ......................................................15BS EN 61755 ......................................................15BS EN 61850 ......................................................15BS EN 61869 ......................................................16BS EN 62002 ......................................................16BS EN 62148 ......................................................16BS EN 62333 ......................................................16BS EN 62493 ......................................................16BS IEC 60079 ......................................................25BS IEC 61010 ......................................................25BS CECC 30801 ..................................................24DD IEC/TS 61850 ..........................................19, 25DD CLC/TS 61850 ........................................19, 25PD CLC/TR 50542 ...............................................18PD IEC/TR 61292 ................................................18PD IEC/TR 61341 ................................................18PD IEC/TR 62476 ................................................18BS QC 300000 .............................................15, 24BS QC 300100 .............................................15, 24BS QC 300301 ....................................................24BS QC 300400 ....................................................24BS QC 300401 ....................................................24BS QC 300600 ....................................................24BS QC 300601 ....................................................25BS QC 300700 ....................................................25BS QC 300701 ....................................................25BS QC 300801 ....................................................25BS QC 301200 ....................................................25BS QC 301201 ....................................................25BS QC 301800 ....................................................25BS QC 301900 ....................................................25BS QC 301901 ....................................................25BS QC 420000 ....................................................25

Engineering

BS 799 ..................................................................8BS 848 ................................................................12BS 3385 ..............................................................23BS 3455 ..............................................................23BS 3510 ..............................................................23BS 3664 ..............................................................23BS 3775 ..............................................................23BS 3890 ..............................................................23BS 4247 ..............................................................23BS 5045 ..............................................................23BS 5288 ..............................................................23BS 6200 ........................................................11, 23

The following British Standards are listed orreferred to in this issue of Update Standardswith the exception of those in ‘New WorkStarted’.

Building and civil engineering

BS 4248 ........................................................14, 23BS 5950 ..............................................................23BS 5974 ................................................................8BS 6100 ................................................................8BS 6911 ........................................................17, 23BS 9295 ................................................................8DD CEN/TS 13307 ..............................................18DD CEN/TS 15366 ..............................................18BS EN 196 ............................................................8BS EN 249 ............................................................8BS EN 338 ............................................................8BS EN 1501 ........................................................21BS EN 1994 ........................................................23BS EN 1996 ........................................................19BS EN 1999 ........................................................21BS EN ISO 7096 ..................................................19BS EN 12269 ......................................................12BS EN 13084 ......................................................19BS EN 14279 ......................................................21BS EN 14695 ......................................................12BS EN 15304 ......................................................12BS EN 15636 ......................................................14BS EN 15651 ......................................................14BS EN 15743 ................................................14, 23BS EN 15848 ......................................................14BS ISO 10265 ...............................................17, 23PD CEN/TR 14383 ...............................................18NA to BS EN 1993 ................................................8NA to BS EN 1999 ..............................................22

Consumer products and services

BS 1384 ........................................................16, 23BS 3951 ..............................................................20BS 4540 ........................................................10, 23BS 8517 ................................................................8DD CEN ISO/TS 10272 ........................................18DD CEN ISO/TS 16634 ........................................18BS EN 597 ..........................................................22BS EN 1022 ........................................................22BS EN 1023 ........................................................22BS EN 1129 ........................................................22BS EN 1130 ........................................................22BS EN 1334 ........................................................22BS EN 1725 ........................................................22BS EN ISO 2825 ............................................10, 23BS EN 12507 ......................................................12BS EN 12727 ......................................................22BS EN 15543 ......................................................19BS EN 50131 ................................................14, 24BS ISO 5 .......................................................16, 23BS ISO 3890 .......................................................16BS ISO 9211 .......................................................17BS ISO 17321 .....................................................22BS ISO 23954 .....................................................17DD ISO/TS 27105 ................................................19DD ISO/TS 27106 ................................................19DD CLC/TS 50131 ........................................14, 24

Electrotechnical

BS 4607 ..............................................................20BS 6201 ........................................................15, 23BS EN 50015 ......................................................24BS EN 50065 ......................................................21

British Standards - Quick Reference Guide

4 Update Standards May 2010Prices may be subject to change.

BS 6200 ........................................................11, 23BS 6201 ........................................................15, 23BS 6339 ........................................................12, 25BS 6580 ................................................................8BS 6701 ................................................................8BS 6911 ........................................................17, 23BS 7723 ........................................................17, 24BS 7772 ..............................................................16BS 7780 ........................................................16, 24BS 7839 ........................................................17, 24BS 8517 ................................................................8BS 9295 ................................................................8BS 10999 ..............................................................8DD 261 ...............................................................18DD CEN/TS 13307 ..............................................18DD CEN/TS 14961 ........................................12, 24DD CEN/TS 15366 ..............................................18DD CEN/TS 15656 ..............................................18DD CEN/TS 15674 ..............................................22DD CEN/TS 15675 ..............................................22DD CEN ISO/TS 10272 ........................................18DD CEN ISO/TS 16634 ........................................18DD CEN ISO/TS 17234 ..................................14, 24BS EN 81 ............................................................19BS EN ISO 105 ......................................................8BS EN 196 ............................................................8BS EN 208 ............................................................8BS EN 249 ............................................................8BS EN 267 ............................................................8BS EN 338 ............................................................8BS EN 453 ..........................................................20BS EN 550 ..........................................................24BS EN 597 ..........................................................22BS EN 632 ....................................................11, 24BS EN 869 ..........................................................20BS EN 980 ..........................................................24BS EN 1007 ..........................................................8BS EN 1022 ........................................................22BS EN 1023 ........................................................22BS EN 1057 ........................................................20BS EN 1071 ........................................................19BS EN 1129 ........................................................22BS EN 1130 ........................................................22BS EN 1236 ........................................................26BS EN 1237 ........................................................26BS EN ISO 1248 ..................................................19BS EN 1334 ........................................................22BS EN 1495 ........................................................20BS EN 1501 ........................................................21BS EN 1656 ..........................................................8BS EN 1676 ..........................................................8BS EN 1706 ........................................................10BS EN 1713 ..................................................14, 24BS EN 1725 ........................................................22BS EN 1820 ........................................................21BS EN 1870 ........................................................21BS EN 1994 ........................................................23BS EN 1996 ........................................................19BS EN 1999 ........................................................21BS EN 2240 ........................................................10BS EN ISO 2825 ............................................10, 23BS EN 2863 ........................................................10BS EN 2954 ........................................................10BS EN ISO 3175 ............................................10, 11BS EN 3226 ........................................................11BS EN 3227 ........................................................11BS EN 3537 ........................................................11BS EN 3538 ........................................................11BS EN 3539 ........................................................11

BS 7723 ........................................................17, 24DD CEN/TS 14961 ........................................12, 24DD CEN ISO/TS 17234 ..................................14, 24BS EN ISO 105 ......................................................8BS EN 1007 ..........................................................8BS EN 1071 ........................................................19BS EN 1236 ........................................................26BS EN 1237 ........................................................26BS EN ISO 1248 ..................................................19BS EN ISO 3175 ............................................10, 11BS EN ISO 3924 ..................................................11BS EN ISO 7837 ..................................................26BS EN ISO 11111 ..........................................12, 21BS EN ISO 11295 ..........................................12, 24BS EN 12472 ......................................................21BS EN ISO 12625 ................................................12BS EN 12878 ......................................................26BS EN 13301 ......................................................12BS EN 13302 ................................................12, 24BS EN 13366 ......................................................26BS EN 13368 ......................................................26BS EN 13507 ......................................................12BS EN 13689 ................................................12, 24BS EN 13702 ................................................12, 24BS EN 13900 ......................................................26BS EN ISO 14419 ................................................12BS EN 14787 ......................................................26BS EN 14888 ......................................................26BS EN 14896 ................................................12, 24BS EN 14961 ................................................12, 24BS EN ISO 15487 ................................................12BS EN 15845 ......................................................14BS EN ISO 17234 ..........................................14, 24BS EN ISO 19739 ................................................19BS EN ISO 24998 ..........................................14, 23BS ISO 7507 .................................................17, 24BS ISO 8779 .......................................................17BS ISO 12643 .....................................................17BS ISO 14436 .....................................................17BS ISO 19334 .....................................................17BS ISO 28078 .....................................................18PD CEN/TR 15993 ...............................................18PD CEN/TR 15996 ...............................................18

Alpha-numeric sequence of BritishStandards quoted in this issue

BS 611 ..........................................................14, 23BS 799 ..................................................................8BS 848 ................................................................12BS 1384 ........................................................16, 23BS 2000 .................................................11, 12, 24BS 3385 ..............................................................23BS 3455 ..............................................................23BS 3510 ..............................................................23BS 3664 ..............................................................23BS 3775 ..............................................................23BS 3890 ..............................................................23BS 3951 ..............................................................20BS 4247 ..............................................................23BS 4248 ........................................................14, 23BS 4540 ........................................................10, 23BS 4607 ..............................................................20BS 4899 ..............................................................23BS 5045 ..............................................................23BS 5288 ..............................................................23BS 5724 ........................................................15, 16BS 5950 ..............................................................23BS 5974 ................................................................8BS 6100 ................................................................8

BS ISO 27025 .....................................................17BS ISO 27894 .....................................................17BS 4A 113 ..........................................................20BS 4A 114 ..........................................................20BS 3S 500 ...........................................................19BS 4S 500 ...........................................................19BS AU 50 ................................................16, 17, 26BS AU 175 ....................................................16, 26

Health and environment

BS 5724 ........................................................15, 16BS 10999 ..............................................................8DD CEN/TS 15674 ..............................................22DD CEN/TS 15675 ..............................................22BS EN 208 ............................................................8BS EN 550 ..........................................................24BS EN 980 ..........................................................24BS EN 1656 ..........................................................8BS EN 1820 ........................................................21BS EN ISO 7885 ..................................................11BS EN ISO 10993 ................................................12BS EN ISO 11135 ................................................24BS EN ISO 11737 ................................................12BS EN 12183 ......................................................12BS EN 12184 ......................................................12BS EN 12342 ......................................................21BS EN 13034 ......................................................21BS EN 13544 ......................................................21BS EN 14605 ......................................................21BS EN 14884 ......................................................22BS EN ISO 14937 ................................................12BS EN 15269 ......................................................12BS EN 15882 ......................................................14BS EN ISO 20795 ................................................14BS EN ISO 21533 ................................................19BS EN ISO 21969 ................................................14BS EN 45502 ......................................................14BS EN 60601 ................................................15, 16BS EN 62083 ......................................................16BS EN 80601 ......................................................16BS ISO 7176 .................................................16, 17BS ISO/TR 14696 .................................................25BS ISO 81060 .....................................................18PD CEN/TR 15874 ...............................................18

Information systems

BS 6701 ................................................................8BS EN ISO 13606 ................................................12BS EN 61918 ......................................................16BS ISO/IEC 13335 ...............................................25BS ISO/IEC 24735 ...............................................17DD ISO/TS 21547 ................................................18DD ISO/TS 27790 ................................................19PD ISO/TR 11633 ................................................18PD ISO/TR 11636 ................................................18PD ISO/TR 12309 ................................................18PD ISO/IEC TR 18018 ..........................................18

Management systems

BS 4899 ..............................................................23DD 261 ...............................................................18BS EN ISO 14001 ................................................19

Materials and chemicals

BS 611 ..........................................................14, 23BS 2000 .................................................11, 12, 24BS 6580 ................................................................8

Update Standards May 2010 Prices may be subject to change. 5

British Standards - Quick Reference Guide continued...

BS ISO 10679 .....................................................17

BS ISO 10911 ...............................................17, 24

BS ISO 11929 ...............................................17, 25

BS ISO 12188 .....................................................17

BS ISO 12214 .....................................................17

BS ISO 12643 .....................................................17

BS ISO/IEC 13335 ...............................................25

BS ISO 14436 .....................................................17

BS ISO/TR 14696 .................................................25

BS ISO 16110 .....................................................17

BS ISO 16750 .....................................................17

BS ISO 16992 .....................................................17

BS ISO 17321 .....................................................22

BS ISO 19334 .....................................................17

BS ISO 23954 .....................................................17

BS ISO/IEC 24735 ...............................................17

BS ISO 27025 .....................................................17

BS ISO 27894 .....................................................17

BS ISO 28078 .....................................................18

BS ISO 31000 .....................................................18

BS ISO 81060 .....................................................18

BS IEC 60079 ......................................................25

BS IEC 61010 ......................................................25

BS CECC 30801 ..................................................24

DD ISO/TS 21547 ................................................18

DD ISO/TS 27105 ................................................19

DD ISO/TS 27106 ................................................19

DD ISO/TS 27790 ................................................19

DD CLC/TS 50131 ........................................14, 24

DD CLC/TS 61850 ........................................19, 25

DD IEC/TS 61850 ..........................................19, 25

PD CEN/TR 14383 ...............................................18

PD CEN/TR 15874 ...............................................18

PD CEN/TR 15993 ...............................................18

PD CEN/TR 15996 ...............................................18

PD ISO/TR 11633 ................................................18

PD ISO/TR 11636 ................................................18

PD ISO/TR 12309 ................................................18

PD ISO/IEC TR 18018 ..........................................18

PD CLC/TR 50542 ...............................................18

PD IEC/TR 61292 ................................................18

PD IEC/TR 61341 ................................................18

PD IEC/TR 62476 ................................................18

BS 4A 113 ..........................................................20

BS 4A 114 ..........................................................20

BS 4S 500 ...........................................................19

BS 3S 500 ...........................................................19

BS QC 300000 .............................................15, 24

BS QC 300100 .............................................15, 24

BS QC 300301 ....................................................24

BS QC 300400 ....................................................24

BS QC 300401 ....................................................24

BS QC 300600 ....................................................24

BS QC 300601 ....................................................25

BS QC 300700 ....................................................25

BS QC 300701 ....................................................25

BS QC 300801 ....................................................25

BS QC 301200 ....................................................25

BS QC 301201 ....................................................25

BS QC 301800 ....................................................25

BS QC 301900 ....................................................25

BS QC 301901 ....................................................25

BS QC 420000 ....................................................25

BS AU 50 ................................................16, 17, 26

BS AU 175 ....................................................16, 26

NA to BS EN 1993 ................................................8

NA to BS EN 1999 ..............................................22

BS EN 15651 ......................................................14BS EN 15743 ................................................14, 23BS EN 15845 ......................................................14BS EN 15848 ......................................................14BS EN 15882 ......................................................14BS EN ISO 17234 ..........................................14, 24BS EN ISO 17635 ..........................................14, 24BS EN ISO 19739 ................................................19BS EN ISO 20795 ................................................14BS EN ISO 20815 ................................................14BS EN ISO 21533 ................................................19BS EN ISO 21969 ................................................14BS EN ISO 23279 ..........................................14, 24BS EN 23908 ................................................11, 24BS EN ISO 24998 ..........................................14, 23BS EN 25821 ................................................11, 24BS EN 45502 ......................................................14BS EN 50015 ......................................................24BS EN 50065 ......................................................21BS EN 50131 ................................................14, 24BS EN 50290 ......................................................14BS EN 50364 ......................................................14BS EN 50366 ......................................................19BS EN 50397 ......................................................14BS EN 50411 ......................................................15BS EN 55015 ......................................................19BS EN 60079 ................................................24, 25BS EN 60318 ................................................15, 24BS EN 60335 ..........................................15, 19, 22BS EN 60384 ........................15, 19, 20, 23, 24, 25BS EN 60601 ................................................15, 16BS EN 60630 ......................................................22BS EN 60730 ................................................15, 22BS EN 60745 ................................................15, 24BS EN 60809 ......................................................22BS EN 61010 ......................................................22BS EN 61029 ......................................................15BS EN 61051 ................................................20, 25BS EN 61280 ......................................................15BS EN 61300 ................................................15, 23BS EN 61347 ......................................................22BS EN 61557 ......................................................24BS EN 61753 ......................................................15BS EN 61755 ......................................................15BS EN 61850 ......................................................15BS EN 61869 ......................................................16BS EN 61918 ......................................................16BS EN 62002 ......................................................16BS EN 62083 ......................................................16BS EN 62148 ......................................................16BS EN 62333 ......................................................16BS EN 62493 ......................................................16BS EN 80601 ......................................................16BS ISO 5 .......................................................16, 23BS ISO 3547 .......................................................22BS ISO 3548 .......................................................16BS ISO 3780 .................................................16, 26BS ISO 3890 .......................................................16BS ISO 4251 .................................................16, 26BS ISO 6194 .................................................16, 24BS ISO 6550 .......................................................16BS ISO 6580 .................................................12, 25BS ISO 7176 .................................................16, 17BS ISO 7507 .................................................17, 24BS ISO 7612 .......................................................17BS ISO 8779 .......................................................17BS ISO 9211 .......................................................17BS ISO 10191 ...............................................17, 26BS ISO 10265 ...............................................17, 23

BS EN 3660 ........................................................11BS EN 3753 ........................................................11BS EN ISO 3908 ............................................11, 24BS EN ISO 3924 ..................................................11BS EN ISO 4254 ............................................11, 24BS EN 4474 ........................................................11BS EN 4632 ........................................................11BS EN 4662 ........................................................11BS EN ISO 4945 ............................................11, 23BS EN ISO 5821 ............................................11, 24BS EN 6069 ........................................................11BS EN ISO 7096 ..................................................19BS EN ISO 7837 ..................................................26BS EN ISO 7885 ..................................................11BS EN ISO 9445 ............................................11, 24BS EN 10283 ......................................................11BS EN ISO 10993 ................................................12BS EN ISO 11111 ..........................................12, 21BS EN ISO 11135 ................................................24BS EN ISO 11295 ..........................................12, 24BS EN ISO 11737 ................................................12BS EN 12062 ................................................14, 24BS EN 12183 ......................................................12BS EN 12184 ......................................................12BS EN 12269 ......................................................12BS EN 12342 ......................................................21BS EN 12472 ......................................................21BS EN 12507 ......................................................12BS EN ISO 12625 ................................................12BS EN 12663 ......................................................12BS EN 12727 ......................................................22BS EN 12864 ......................................................21BS EN 12878 ......................................................26BS EN 12965 ......................................................21BS EN 13001 ......................................................21BS EN 13034 ......................................................21BS EN 13084 ......................................................19BS EN 13301 ......................................................12BS EN 13302 ................................................12, 24BS EN 13322 ................................................19, 23BS EN ISO 13351 ..........................................12, 25BS EN 13366 ......................................................26BS EN 13368 ......................................................26BS EN 13418 ......................................................21BS EN 13507 ......................................................12BS EN 13544 ......................................................21BS EN ISO 13606 ................................................12BS EN 13689 ................................................12, 24BS EN 13702 ................................................12, 24BS EN 13900 ......................................................26BS EN ISO 14001 ................................................19BS EN 14279 ......................................................21BS EN ISO 14419 ................................................12BS EN 14605 ......................................................21BS EN 14695 ......................................................12BS EN 14787 ......................................................26BS EN 14884 ......................................................22BS EN 14888 ......................................................26BS EN 14896 ................................................12, 24BS EN 14910 ......................................................21BS EN ISO 14937 ................................................12BS EN 14961 ................................................12, 24BS EN 15056 ......................................................21BS EN 15269 ......................................................12BS EN 15304 ......................................................12BS EN ISO 15487 ................................................12BS EN 15543 ......................................................19BS EN 15622 ......................................................14BS EN 15636 ......................................................14

Alpha-numeric sequence of British Standards continued...


BS 6701:2010Telecommunications equipment andtelecommunications cabling. Specification forinstallation, operation and maintenance

supersedes BS 6701:2004ISBN 978 0 580 67615 4£43.00 members, £86.00 non-members

TCT/7

BS 8517-2:2010Security dogs. Code of practice for the use ofdetection dogs

no current standard is supersededISBN 978 0 580 66766 4£62.00 members, £124.00 non-members

GW/3

BS 9295:2010Guide to the structural design of buriedpipelines


B/505

BS 10999:2010Specification for distress signal units for the fireand rescue service


PH/4

NA to BS EN 1993-3-1:2006UK National Annex to Eurocode 3. Design ofsteel structures. Towers, masts and chimneys.Towers and masts


B/525/32

BS EN PUBLICATIONS

The following are British Standardimplementations of the English languageversions of European Standards (ENs).

BSI has an obligation to publish all ENsand to withdraw any conflicting BritishStandards. This has led to a series ofstandards, BS ENs, using the EN number.

Note: The date referenced in theidentifier is the date of the Europeanstandard.

BS EN ISO 105-C08:2010Textiles. Tests for colour fastness. Colourfastness to domestic and commercial launderingusing a non-phosphate reference detergentincorporating a low-temperature bleachactivator

supersedes BS EN ISO 105-C08:2002+A1:2008ISBN 978 0 580 66849 4£43.00 members, £86.00 non-members

TCI/81

BRITISH STANDARDS

The following British Standardpublications are available fromBSI Customer Services (see ’How to order’on page 2).

The publications listed below are newand revised British Standards that weremade available last month.

An existing BSI publication bearing anumber identical to one announcedbelow is automatically withdrawn unlessstated otherwise.

In all other cases of supersession, detailsare given and a corresponding entryappears in the ’British Standardswithdrawn’ section.

BRITISH STANDARD IMPLEMENTATIONSWILL BE SUPPLIED IN PREFERENCE TOEUROPEAN OR INTERNATIONALSTANDARDS, UNLESS OTHERWISEREQUESTED.

Please order by the British Standardreference not the ISBN number.

BS 2000 series standards are also availablefrom:–Library of the Energy Institute61 New Cavendish StreetLondon W1G 7ARTel: 020 7467 7100Fax: 020 7255 1472Email: [email protected] this series, member pricing isapplicable to BSI and Energy Institutemembers.

BS 799-5:2010Oil burning equipment. Carbon steel oil storagetanks. Specification

supersedes BS 799-5:1987ISBN 978 0 580 59342 0£71.00 members, £142.00 non-members

RHE/13

BS 5974:2010Code of practice for the planning, design,setting up and use of temporary suspendedaccess equipment


B/514/39

BS 6100-0:2010Building and civil engineering. Vocabulary.Introduction and index


B/500/-/1

BS 6580:2010Specification for corrosion inhibiting, enginecoolant concentrate (“antifreeze”)

supersedes BS 6580:1992+A1:1993ISBN 978 0 580 70794 0£35.00 members, £70.00 non-members

I/-

8 Update Standards May 2010Prices may be subject to change.8

BS EN 196-6:2010Methods of testing cement. Determination offineness

supersedes BS EN 196-6:1992ISBN 978 0 580 62238 0£71.00 members, £142.00 non-members

B/516

BS EN 208:2009Personal eye-protection. Eye-protectors foradjustment work on lasers and laser systems(laser adjustment eye-protectors)

supersedes BS EN 208:1999ISBN 978 0 580 59669 8£62.00 members, £124.00 non-members

PH/2

BS EN 249:2010Sanitary appliances. Shower trays made fromcrosslinked cast acrylic sheets. Requirementsand test methods


B/503

BS EN 267:2009Automatic forced draught burners for liquidfuels


GSE/27

BS EN 338:2009Structural timber. Strength classes


B/518

BS EN 1007-5:2010Advanced technical ceramics. Ceramiccomposites. Methods of test for reinforcements.Determination of distribution of tensilestrength and of tensile strain to failure offilaments within a multifilament tow atambient temperature


RPI/13

BS EN 1656:2009Chemical disinfectants and antiseptics.Quantitative suspension test for the evaluationof bactericidal activity of chemical disinfectantsand antiseptics used in the veterinary area. Testmethod and requirements (phase 2, step 1)


CH/216

BS EN 1676:2010Aluminium and aluminium alloys. Alloyedingots for remelting. Specifications


NFE/35

British Standards

BS EN 1706:2010Aluminium and aluminium alloys. Castings.Chemical composition and mechanicalproperties


NFE/35

BS EN 2240-021:2010Aerospace series. Lamps, incandescent. Lamp,code 313. Product standard


ACE/6



ACE/6



ACE/6



ACE/6



ACE/6



ACE/6



ACE/6

BS EN Publications continued...




ACE/6



ACE/6



ACE/6



ACE/6

BS EN ISO 2825:2010Spices and condiments. Preparation of a groundsample for analysis


AW/7

BS EN 2863:2010Aerospace series. Nuts, anchor, self-locking,fixed, 90º corner, with counterbore, in heatresisting steel, MoS2 lubricated. Classification:1100 MPa (at ambient temperature)/315ºC


ACE/12

BS EN 2954-002:2010Aerospace series. Macrostructure of titaniumand titanium alloy wrought products.Macrostructure of bar, section, forging stockand forgings


ACE/61/-/49

BS EN ISO 3175-1:2010Textiles. Professional care, drycleaning andwetcleaning of fabrics and garments.Assessment of performance after cleaning andfinishing

supersedes BS EN ISO 3175-1:1998ISBN 978 0 580 68536 1£43.00 members, £86.00 non-members

TCI/82

10



ACE/6



ACE/6



ACE/6



ACE/6



ACE/6



ACE/6



ACE/6



ACE/6

BS EN 4662:2010Aerospace series. Test specification for vibrationcontrol components


ACE/12

BS EN ISO 4945:2009Steel. Determination of nitrogen content.Spectrophotometric method

supersedes BS 6200-3.22.2:1985ISBN 978 0 580 68220 9£35.00 members, £70.00 non-members

ISE/102

BS EN ISO 5821:2009Resistance welding. Spot welding electrode caps


WEE/29

BS EN 6069:2009Aerospace series. Rivet, 100º reduced flushhead, close tolerance. Inch series


ACE/12

BS EN ISO 7885:2010Dentistry. Sterile injection needles for single use

supersedes BS EN ISO 7885:2001ISBN 978 0 580 59580 6£35.00 members, £70.00 non-members

CH/106/4

BS EN ISO 9445-1:2010Continuously cold-rolled stainless steel.Tolerances on dimensions and form. Narrowstrip and cut lengths


ISE/105

BS EN ISO 9445-2:2010Continuously cold-rolled stainless steel.Tolerances on dimensions and form. Wide stripand plate/sheet


ISE/105

BS EN 10283:2010Corrosion resistant steel castings


ISE/111

BS EN 3753:2010Aerospace series. Nuts, anchor, self-locking,fixed, 60º corner, with counterbore, in alloysteel, cadmium plated, MoS2 lubricated.Classification: 1100 MPa (at ambienttemperature)/235ºC


ACE/12

BS EN ISO 3908:2009Hardmetals. Determination of insoluble (free)carbon. Gravimetric method


ISE/65

BS EN ISO 3924:2010(BS 2000-582:2010)Petroleum products. Determination of boilingrange distribution. Gas chromatographymethod


PTI/13

Available from the Institute of Petroleum, see the’British Standards’ section foreword for orderinginformation.

BS EN ISO 4254-1:2009Agricultural machinery. Safety. Generalrequirements


AGE/6

BS EN ISO 4254-7:2009Agricultural machinery. Safety. Combineharvesters, forage harvesters and cottonharvesters


AGE/32

BS EN 4474:2009Aerospace series. Aluminium pigmentedcoatings. Coating methods


ACE/61

BS EN 4632-005:2009Aerospace series. Weldability and brazeabilityof materials in aerospace constructions.Homogeneous assemblies of heat resisting Ni orCo base alloys


ACE/61/-/2

BS EN ISO 3175-2:2010Textiles. Professional care, drycleaning andwetcleaning of fabrics and garments. Procedurefor testing performance when cleaning andfinishing using tetrachloroethene


TCI/82

BS EN 3226:2009Aerospace series. Nuts, hexagon, plain, normalheight, normal across flats, steel, cadmiumplated. Classification: 1100 MPa/235ºC


ACE/12

BS EN 3227:2010Aerospace series. Nuts, hexagonal, plain,normal height, normal across flats, in steel,cadmium plated, left hand thread.Classification: 1100 MPa (at ambienttemperature)/235ºC


ACE/12

BS EN 3537:2010Aerospace series. Nuts, anchor, self-locking,fixed, two lug, with counterbore, in heatresisting steel, MoS2 lubricated. Classification:1100 MPa (at ambient temperature)/315ºC


ACE/12

BS EN 3538:2010Aerospace series. Nuts, anchor, self-locking,fixed, two lug, reduced series, withcounterbore, in heat resisting steel, MoS2lubricated. Classification: 1100 MPa (at ambienttemperature)/315ºC


ACE/12

BS EN 3539:2010Aerospace series. Nuts, anchor, self-locking, onelug, fixed, with counterbore, in heat resistingsteel, MoS2 lubricated. Classification: 1100 MPa(at ambient temperature)/315ºC


ACE/12

BS EN 3660-021:2009Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors. Cable outlet, style A, 90º, unsealed,self-locking with clamp strain relief for EN 3645.Product standard


ACE/6


BS EN ISO 14419:2010Textiles. Oil repellency. Hydrocarbon resistancetest


TCI/24

BS EN 14695:2010Flexible sheets for waterproofing. Reinforcedbitumen sheets for waterproofing of concretebridge decks and other trafficked areas ofconcrete. Definitions and characteristics


B/546/9

BS EN ISO 14937:2009Sterilization of health care products. Generalrequirements for characterization of asterilizing agent and the development,validation and routine control of a sterilizationprocess for medical devices


CH/198

BS EN 14961-1:2010Solid biofuels. Fuel specifications and classes.General requirements

supersedes DD CEN/TS 14961:2005ISBN 978 0 580 67082 4£86.00 members, £172.00 non-members

PTI/17

BS EN 15269-1:2010Extended application of test results for fireresistance and/or smoke control for door,shutter and openable window assemblies,including their elements of building hardware.General requirements


FSH/22/5

BS EN 15304:2010Determination of the freeze-thaw resistance ofautoclaved aerated concrete


B/523

BS EN ISO 15487:2010Textiles. Method for assessing appearance ofapparel and other textile end products afterdomestic washing and drying


TCI/82

BS EN ISO 12625-12:2010Tissue paper and tissue products. Determinationof tensile strength of perforated lines.Calculation of perforation efficiency


PAI/11

BS EN 12663-1:2010Railway applications. Structural requirements ofrailway vehicle bodies. Locomotives andpassenger rolling stock (and alternative methodfor freight wagons)

supersedes BS EN 12663:2000 which remainscurrentISBN 978 0 580 58608 8£71.00 members, £142.00 non-members

RAE/1/-/2

BS EN 13301:2010(BS 2000-504:2010)Bitumen and bituminous binders.Determination of staining tendency of bitumen

supersedes the dual numbered standardBS EN 13301:2003, BS 2000-504:2003ISBN 978 0 580 62919 8£19.50 members, £26.00 non-members

PTI/13


BS EN 13302:2010(BS 2000-505:2010)Bitumen and bituminous binders.Determination of dynamic viscosity ofbituminous binder using a rotating spindleapparatus

supersedes the dual numbered standardsBS EN 13302:2003, BS 2000-505:2003,BS EN 13702-2:2003, BS 2000-514:2003 andBS EN 14896:2006, BS 2000-546:2006ISBN 978 0 580 62920 4£19.50 members, £26.00 non-members

PTI/13


BS EN ISO 13351:2009Fans. Dimensions

supersedes the dual numbered standardsBS ISO 6580:2005, BS 6339:2005 andBS EN ISO 13351:2008, BS 848-4:1997ISBN 978 0 580 65054 3£43.00 members, £86.00 non-members

MCE/17

BS EN 13507:2010Thermal spraying. Pre-treatment of surfaces ofmetallic parts and components for thermalspraying


STI/40

BS EN ISO 13606-5:2010Health informatics. Electronic health recordcommunication. Interface specification


IST/35

BS EN ISO 10993-16:2010Biological evaluation of medical devices.Toxicokinetic study design for degradationproducts and leachables


CH/194

BS EN ISO 11111-1:2009Textile machinery. Safety requirements.Common requirements


TCI/33

BS EN ISO 11295:2010Classification and information on design ofplastics piping systems used for renovation


PRI/88/3

BS EN ISO 11737-2:2009Sterilization of medical devices. Microbiologicalmethods. Tests of sterility performed in thedefinition, validation and maintenance of asterilization process


CH/198

BS EN 12183:2009Manual wheelchairs. Requirements and testmethods


CH/173/1

BS EN 12184:2009Electrically powered wheelchairs, scooters andtheir chargers. Requirements and test methods


CH/173/1

BS EN 12269-2:2010Determination of the bond behaviour betweenreinforcing steel and autoclaved aeratedconcrete by the beam test. Long term test


B/523

BS EN 12507:2005Transportation services. Guidance notes on theapplication of EN ISO 9001:2000 to the roadtransportation, storage, distribution and railwaygoods industries


TW/2



BS EN ISO 23279:2010Non-destructive testing of welds. Ultrasonictesting. Characterization of indications in welds


WEE/46

BS EN ISO 24998:2008Plastics laboratory ware. Single-use Petri dishesfor microbiological procedures


LBI/36/1

BS EN 45502-2-3:2010Active implantable medical devices. Particularrequirements for cochlear and auditorybrainstem implant systems


CH/150/6

BS EN 50131-4:2009Alarm systems. Intrusion and hold-up systems.Warning devices

supersedes DD CLC/TS 50131-4:2006ISBN 978 0 580 62769 9£71.00 members, £142.00 non-members

GW/1/1

BS EN 50290-4-2:2008Communication cables. General considerationsfor the use of cables. Guide to use


EPL/46

BS EN 50364:2010Limitation of human exposure toelectromagnetic fields from devices operatingin the frequency range 0 Hz to 300 GHz, used inelectronic article surveillance (EAS), radiofrequency identification (RFID) and similarapplications


GEL/106

BS EN 50397-3:2010Covered conductors for overhead lines and therelated accessories for rated voltages above 1 kV A.C. and not exceeding 36 kV A.C. Guideto use


GEL/20/16

BS EN 15845:2010Paper and board. Determination of thecytotoxicity of aqueous extracts


PAI/11

BS EN 15848:2010Water conditioning equipment inside buildings.Adjustable chemical dosing systems.Requirements for performance, safety andtesting


B/504/-/13

BS EN 15882-3:2009Extended applications of results from fireresistance tests for service installations.Penetration seals


FSH/22

BS EN ISO 17234-1:2010Leather. Chemical tests for the determination ofcertain azo colorants in dyed leathers.Determination of certain aromatic aminesderived from azo colorants

supersedes DD CEN ISO/TS 17234:2003ISBN 978 0 580 62590 9£35.00 members, £70.00 non-members

TCI/69

BS EN ISO 17635:2010Non-destructive testing of welds. General rulesfor metallic materials


WEE/46

BS EN ISO 20795-2:2010Dentistry. Base polymers. Orthodontic basepolymers


CH/106/2

BS EN ISO 20815:2010Petroleum, petrochemical and natural gasindustries. Production assurance and reliabilitymanagement


PSE/17

BS EN ISO 21969:2009High-pressure flexible connections for use withmedical gas systems


CH/121/6

BS EN 15622:2010Copper and copper alloys. Determination oflead content. Flame atomic absorptionspectrometric method (FAAS)


NFE/34

BS EN 15636:2010Sanitary appliances. Shower trays made fromimpact modified extruded acrylic sheets.Requirements and test methods


B/503

BS EN 15651-1:2010Sealants for non-structural use in joints inbuildings and pedestrian walkways. Sealants forfacade elements


B/547

BS EN 15651-2:2010Sealants for non-structural use in joints inbuildings and pedestrian walkways. Sealants forglazing


B/547

BS EN 15651-3:2010Sealants for non-structural use in joints inbuildings and pedestrian walkways. Sealants forsanitary joints


B/547

BS EN 15651-4:2010Sealants for non-structural use in joints inbuildings and pedestrian walkways. Sealants forpedestrian walkways


B/547

BS EN 15651-5:2010Sealants for non-structural use in joints inbuildings and pedestrian walkways. Evaluationof conformity and marking


B/547

BS EN 15743:2010Supersulfated cement. Composition,specifications and conformity criteria


B/516



To order visit

www.bsigroup.com/shop

BS EN 61300-2-21:2010Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures. Tests. Compositetemperature/humidity cyclic test

supersedes BS EN 61300-2-21:1997ISBN 978 0 580 56916 6£43.00 members, £86.00 non-members

GEL/86/2

BS EN 61753-111-7:2010Fibre optic interconnecting devices and passivecomponents performance standard. Sealedclosures for category A. Aerial


GEL/86/2

BS EN 61753-111-8:2010Fibre optic interconnecting devices and passivecomponents performance standard. Sealedclosures for category G. Ground


GEL/86/2

BS EN 61753-111-9:2010Fibre optic interconnecting devices and passivecomponents performance standard. Sealedclosures for category S. Subterranean


GEL/86/2

BS EN 61755-3-1:2009Fibre optic connector optical interfaces. Opticalinterface, 2,5 mm and 1,25 mm diametercylindrical full zirconia PC ferrule, single modefibre


GEL/86/2

BS EN 61755-3-2:2009Fibre optic connector optical interfaces. Opticalinterface, 2,5 mm and 1,25 mm diametercylindrical full zirconia ferrules for 8 degreesangled-PC single mode fibres


GEL/86/2

BS EN 61850-6:2010Communication networks and systems forpower utility automation. Configurationdescription language for communication inelectrical substations related to IEDs


PEL/57

BS EN 60745-2-8:2009Hand-held motor-operated electric tools. Safety.Particular requirements for shears and nibblers

supersedes BS EN 60745-2-8:2003+A1:2009 whichremains currentISBN 978 0 580 64796 3£43.00 members, £86.00 non-members

CPL/116

BS EN 60745-2-9:2009Hand-held motor-operated electric tools. Safety.Particular requirements for tappers


CPL/116

BS EN 60745-2-14:2009Hand-held motor-operated electric tools. Safety.Particular requirements for planers


CPL/116

BS EN 60745-2-18:2009Hand-held motor-operated electric tools. Safety.Particular requirements for strapping tools


CPL/116

BS EN 60745-2-20:2009Hand-held motor-operated electric tools. Safety.Particular requirements for band saws


CPL/116

BS EN 61029-2-9:2009Safety of transportable motor-operated electrictools. Particular requirements for mitre saws

supersedes BS EN 61029-2-9:2002 which remainscurrentISBN 978 0 580 59415 1£71.00 members, £142.00 non-members

CPL/116

BS EN 61029-2-11:2009Safety of transportable motor-operated electrictools. Particular requirements for combinedmitre and bench saws


CPL/116

BS EN 61280-1-4:2010Fibre optic communication subsystem testprocedures. General communication subsystems.Light source encircled flux measurementmethod


GEL/86/3

BS EN 50411-2-9:2010Fibre organisers and closures to be used inoptical fibre communications systems. Productspecifications. Non-sealed closures for air blownfibre microduct cable, for category S & A


GEL/86/2

BS EN 60318-1:2009Electroacoustics. Simulators of human head andear. Ear simulator for the measurement ofsupra-aural and circumaural earphones

supersedes BS EN 60318-1:1998 and BS EN 60318-2:1998ISBN 978 0 580 56421 5£62.00 members, £124.00 non-members

EPL/29

BS EN 60335-2-30:2009Household and similar electrical appliances.Safety. Particular requirements for room heaters


CPL/61/07

BS EN 60384-1:2009Fixed capacitors for use in electronicequipment. Generic specification

supersedes BS 6201-1:1982, BS EN 60384-1:2001,BS QC 300000:1983 and BS QC 300100:1991ISBN 978 0 580 56872 5£93.00 members, £186.00 non-members

EPL/40X

BS EN 60601-2-41:2009Medical electrical equipment. Particularrequirements for basic safety and essentialperformance of surgical luminaires andluminaires for diagnosis


CH/62/4

BS EN 60601-2-54:2009Medical electrical equipment. Particularrequirements for the basic safety and essentialperformance of x-ray equipment forradiography and radioscopy

supersedes the dual numbered standardsBS EN 60601-2-7:1998, BS 5724-2.7:1998 andBS EN 60601-2-32:1995, BS 5724-2.32:1995 whichremain current. Partially supersedes BS EN 60601-2-28:1993, BS 5724-2.128:1993ISBN 978 0 580 56960 9£93.00 members, £186.00 non-members

CH/62/2

BS EN 60730-2-4:2007Automatic electrical controls for household andsimilar use. Particular requirements for thermalmotor protectors for motor-compressors ofhermetic and semi-hermetic type


CPL/72


BS ISO 3890-1:2009Milk and milk products. Determination ofresidues of organochlorine compounds(pesticides). General considerations andextraction methods

supersedes BS ISO 3890-1:2000

ISBN 978 0 580 67125 8£62.00 members, £124.00 non-members

AW/5

BS ISO 3890-2:2009Milk and milk products. Determination ofresidues of organochlorine compounds(pesticides). Test methods for crude extractpurification and confirmation



AW/5

BS ISO 4251-4:2010Tyres (ply rating marked series) and rims foragricultural tractors and machines. Tyreclassification and nomenclature

supersedes BS AU 50-1.4.3a:1992


AUE/4

BS ISO 6194-3:2009Rotary shaft lip-type seals incorporatingelastomeric sealing elements. Storage, handlingand installation

supersedes BS 7780-3:1994


MCE/11

BS ISO 6550-4:2009Road vehicles. Sheath-type glow-plugs withconical seating and their cylinder head housing.M8 x 1 glow-plugs



MCE/9

BS ISO 7176-4:2008Wheelchairs. Energy consumption of electricwheelchairs and scooters for determination oftheoretical distance range



CH/173/1

BS ISO 7176-9:2009Wheelchairs. Climatic tests for electricwheelchairs



CH/173/1

BS IMPLEMENTATIONS

BS Implementations comprise the ISO orIEC text without any national deviationand with front and back cover indicatingthe UK committee responsible.No other information will normally beadded.

Note: The date referenced in theidentifier is the date of the internationalstandard.

BS ISO 5-1:2009Photography and graphic technology. Densitymeasurements. Geometry and functionalnotation


CPW/42

BS ISO 5-2:2009Photography and graphic technology. Densitymeasurements. Geometric conditions fortransmittance density


CPW/42

BS ISO 5-3:2009Photography and graphic technology. Densitymeasurements. Spectral conditions

supersedes BS ISO 5-3:1995ISBN 978 0 580 65284 4£86.00 members, £172.00 non-members

CPW/42

BS ISO 5-4:2009Photography and graphic technology. Densitymeasurements. Geometric conditions forreflection density


CPW/42

BS ISO 3548-2:2009Plain bearings. Thin-walled half bearings withor without flange. Measurement of wallthickness and flange thickness


MCE/12

BS ISO 3780:2009Road vehicles. World manufacturer identifier(WMI) code

supersedes BS AU 175-2b:1983ISBN 978 0 580 58481 7£35.00 members, £70.00 non-members

AUE/15

BS EN 61869-1:2009Instrument transformers. General requirements


PEL/38

BS EN 61918:2008Industrial communication networks. Installationof communication networks in industrialpremises


AMT/7

BS EN 62002-1:2008Mobile and portable DVB-T/H radio access.Interface specification


EPL/100

BS EN 62083:2009Medical electrical equipment. Requirements forthe safety of radiotherapy treatment planningsystems

supersedes BS EN 62083:2001 which remainscurrentISBN 978 0 580 60073 9£71.00 members, £142.00 non-members

CH/62/3

BS EN 62148-15:2010Fibre optic active components and devices.Package and interface standards. Discretevertical cavity surface emitting laser packages


GEL/86/3

BS EN 62333-3:2010Noise suppression sheet for digital devices andequipment. Characterization of parameters ofnoise suppression sheet


EPL/51

BS EN 62493:2010Assessment of lighting equipment related tohuman exposure to electromagnetic fields


CPL/34

BS EN 80601-2-35:2009Medical electrical equipment. Particularrequirements for the basic safety and essentialperformance of heating devices using blankets,pads and mattresses and intended for heatingin medical use

supersedes the dual numbered standardBS EN 60601-2-35:1997, BS 5724-2.35:1997 whichremains currentISBN 978 0 580 57168 8£93.00 members, £186.00 non-members

CH/62/4



BS ISO 16110-2:2010Hydrogen generators using fuel processingtechnologies. Test methods for performance


PVE/3/8

BS ISO 16750-2:2010Road vehicles. Environmental conditions andtesting for electrical and electronic equipment.Electrical loads


AUE/16

BS ISO 16992:2010Passenger car tyres. Spare unit substitutiveequipment (SUSE)

supersedes BS ISO 16992:2006ISBN 978 0 580 65006 2£43.00 members, £86.00 non-members

AUE/4

BS ISO 19334:2010Binders for paints and varnishes. Gum rosin.Gas-chromatographic analysis


STI/3

BS ISO 23954:2009Oil of lime expressed, Persian type (Citruslatifolia Tanaka)


AW/54

BS ISO/IEC 24735:2009Information technology. Office equipment.Method for measuring digital copying machineproductivity


IST/3

BS ISO 27025:2010Space systems. Programme management.Quality assurance requirements


ACE/68/-/5

BS ISO 27894:2009Vacuum technology. Vacuum gauges.Specifications for hot cathode ionizationgauges


MCE/8/-/4

BS ISO 10679:2010Steel. Cast tool steel


ISE/111

BS ISO 10911:2010Solid hardmetal end mills with cylindrical shank.Dimensions


MTE/18

BS ISO 11929:2010Determination of the characteristic limits(decision threshold, detection limit and limits ofthe confidence interval) for measurements ofionizing radiation. Fundamentals andapplication

supersedes BS ISO 11929-1:2000, BS ISO 11929-2:2000, BS ISO 11929-3:2000, BS ISO 11929-4:2001, BS ISO 11929-5:2005, BS ISO 11929-6:2005, BS ISO 11929-7:2005 and BS ISO 11929-8:2005ISBN 978 0 580 59044 3£93.00 members, £186.00 non-members

NCE/2

BS ISO 12188-1:2010Tractors and machinery for agriculture andforestry. Test procedures for positioning andguidance systems in agriculture. Dynamictesting of satellite-based positioning devices


AGE/6

BS ISO 12214:2010Road vehicles. Direction-of-motion stereotypesfor automotive hand controls


AUE/12

BS ISO 12643-4:2010Graphic technology. Safety requirements forgraphic technology equipment and systems.Converting equipment and systems


PAI/43

BS ISO 14436:2010Pulps. Standard tap water for drainabilitymeasurements. Conductivity 40 mS/m to 150 mS/m


PAI/11

BS ISO 7176-21:2009Wheelchairs. Requirements and test methodsfor electromagnetic compatibility of electricallypowered wheelchairs and scooters, and batterychargers


CH/173/1

BS ISO 7507-4:2010Petroleum and liquid petroleum products.Calibration of vertical cylindrical tanks. Internalelectro-optical distance-ranging method


PTI/12

BS ISO 7612:2009Diesel engines. Base-mounted in-line fuelinjection pumps and high-pressure supplypumps for common rail fuel injection systems.Mounting dimensions


MCE/22

BS ISO 8779:2010Plastics piping systems. Polyethylene (PE) pipesfor irrigation. Specifications


PRI/88/2

BS ISO 9211-1:2010Optics and photonics. Optical coatings.Definitions


CPW/172/3

BS ISO 9211-2:2010Optics and photonics. Optical coatings. Opticalproperties


CPW/172/3

BS ISO 10191:2010Passenger car tyres. Verifying tyre capabilities.Laboratory test methods

supersedes BS AU 50-1.1.4b:1996ISBN 978 0 580 69281 9£62.00 members, £124.00 non-members

AUE/4

BS ISO 10265:2008Earth-moving machinery. Crawler machines.Performance requirements and test proceduresfor braking systems


B/513/1


DRAFTS FOR DEVELOPMENT

DD 261:2010Human reliability. Guide to the fundamentalconsiderations


DS/1

DD CEN ISO/TS 10272-3:2010Microbiology of food and animal feeding stuffs.Horizontal method for detection andenumeration of Campylobacter spp. Semi-quantitative method


AW/9

DD CEN/TS 13307-2:2009Laminated and finger jointed timber blanks andsemi-finished profiles for non-structural uses.Production control


B/543

DD CEN/TS 15366:2009Winter and road service area maintenanceequipment. Solid absorbents intended for roadusage


B/513

DD CEN/TS 15656:2009Copper and copper alloys. Determination ofphosphorus content. Spectrophotometricmethod


NFE/34

DD CEN ISO/TS 16634-2:2009Food products. Determination of the totalnitrogen content by combustion according tothe Dumas principle and calculation of thecrude protein content. Cereals, pulses andmilled cereal products


AW/4

DD ISO/TS 21547:2010Health informatics. Security requirements forarchiving of electronic health records. Principles


IST/35

PD CEN/TR 15874:2009Railway applications. Noise emission. Road testof standard for rail roughness measurementEN 15610:2009


EH/1/2

PD CEN/TR 15993:2010Automotive fuels. Ethanol (E85) automotivefuel. Background to the parameters requiredand their respective limits and determination


PTI/2

PD CEN/TR 15996:2010Hydrometry. Measurement of snow waterequivalent using snow mass registration devices


CPI/113

PD ISO/IEC TR 18018:2010Information technology. Systems and softwareengineering. Guide for configurationmanagement tool capabilities


IST/15

PD CLC/TR 50542:2010Railway applications. Communication meansbetween safety equipment and man-machineinterfaces (MMI)


GEL/9

PD IEC/TR 61292-6:2010Optical amplifiers. Distributed Ramanamplification


GEL/86/3

PD IEC/TR 61341:2010Method of measurement of centre beamintensity and beam angle(s) of reflector lamps


CPL/34/1

PD IEC/TR 62476:2010Guidance for evaluation of products withrespect to substance-use restrictions in electricaland electronic products


GEL/111

BS ISO 28078-2:2009Plastics. Poly(phenylene sulfide) (PPS) mouldingand extrusion materials. Preparation of testspecimens and determination of properties


PRI/82

BS ISO 31000:2009Risk management. Principles and guidelines


RM/1

BS ISO 81060-2:2009Non-invasive sphygmomanometers. Clinicalvalidation of automated measurement type


CH/121/5

PUBLISHED DOCUMENTS

PD ISO/TR 11633-1:2009Health informatics. Information securitymanagement for remote maintenance ofmedical devices and medical informationsystems. Requirements and risk analysis


IST/35

PD ISO/TR 11633-2:2009Health informatics. Information securitymanagement for remote maintenance ofmedical devices and medical informationsystems. Implementation of an informationsecurity management system (ISMS)


IST/35

PD ISO/TR 11636:2009Health informatics. Dynamic on-demand virtualprivate network for health informationinfrastructure


IST/35

PD ISO/TR 12309:2009Health informatics. Guidelines for terminologydevelopment organizations


IST/35

PD CEN/TR 14383-5:2010Prevention of crime. Urban planning andbuilding design. Petrol stations


B/562

BS Implementations continued...


DD ISO/TS 27105:2009Milk and milk products. Determination of hen’segg white lysozyme by HPLC


AW/5

DD ISO/TS 27106:2009Cheese. Determination of nisin A content by LC-MS and LC-MS-MS


AW/5

DD ISO/TS 27790:2009Health informatics. Document registryframework


IST/35

DD CLC/TS 61850-80-1:2010Communication networks and systems forpower utility automation. Guideline toexchanging information from a CDC-based datamodel using IEC 60870-5-101 or IEC 60870-5-104

supersedes DD IEC/TS 61850-80-1:2009ISBN 978 0 580 69044 0£99.00 members, £198.00 non-members

PEL/57

AEROSPACE SERIES

BS 4S 500:2010Aerospace series. Procedure for inspection,testing and acceptance of steel sheet and strip

supersedes BS 3S 500:1996+A1:1997ISBN 978 0 580 67014 5£71.00 members, £142.00 non-members

ACE/61

BS EN 13322-1:2003+A1:2006Transportable gas cylinders. Refillable weldedsteel gas cylinders. Design and construction.Carbon steel

CORRIGENDUM 1

PVE/3/3

Also incorporates Amendment 1

BS EN ISO 14001:2004Environmental management systems.Requirements with guidance for use

CORRIGENDUM 1

SES/1/1

BS EN 15543:2008Glass packaging. Finishes for bottles. Screwthread finishes for bottles for non-carbonatedliquids

CORRIGENDUM 1

PKW/0/-/7

BS EN ISO 19739:2005Natural gas. Determination of sulfurcompounds using gas chromatography

CORRIGENDUM 2

PTI/15

Also incorporates Corrigenda 1

BS EN ISO 21533:2003Dentistry. Reusable cartridge syringes intendedfor intraligamentary injections

CORRIGENDUM 2

CH/106/4


BS EN 50366:2003+A1:2006Household and similar electrical appliances.Electromagnetic fields. Methods for evaluationand measurement

CORRIGENDUM 1

CPL/61


BS EN 55015:2006+A2:2009Limits and methods of measurement of radiodisturbance characteristics of electrical lightingand similar equipment

CORRIGENDUM 1

GEL/210/11

Also incorporates Amendments 1 & 2

BS EN 60335-1:2002+A2:2006Household and similar electrical appliances.Safety. General requirements

CORRIGENDUM 6

CPL/61

Also incorporates Corrigenda 1, 2, 3, 4 & 5 andAmendments 2, 11, 12 & 13

BS EN 60384-2:2005Fixed capacitors for use in electronicequipment. Sectional specification: Fixedmetallized polyethylene-terephthalate filmdielectric D.C. capacitors

CORRIGENDUM 1

EPL/40X

CORRIGENDA TO BRITISHSTANDARDS

Most amendments are not issuedseparately. Those that make significantchanges to a standard are incorporatedinto the standard which is reissued (see‘Updated British Standards’). BritishStandards which have been corrected viacorrigenda are available on request, freeof charge to past purchasers of thestandard. All amendments and corrigendato date of despatch are included withinany main publication when ordered forthe first time.

The following corrigenda to BritishStandards were made available lastmonth.

BS EN 81-3:2000+A1:2008Safety rules for the construction and installationof lifts. Electric and hydraulic service lifts

CORRIGENDUM 1

MHE/4


BS EN 1071-6:2007Advanced technical ceramics. Methods of testfor ceramic coatings. Determination of theabrasion resistance of coatings by a micro-abrasion wear test

CORRIGENDUM 1

RPI/13

BS EN ISO 1248:2008Iron oxide pigments. Specifications andmethods of test

CORRIGENDUM 2

STI/1


BS EN 1996-2:2006Eurocode 6. Design of masonry structures.Design considerations, selection of materialsand execution of masonry

CORRIGENDUM 1

B/525/6

BS EN 1996-3:2006Eurocode 6. Design of masonry structures.Simplified calculation methods for unreinforcedmasonry structures

CORRIGENDUM 1

B/525/6

BS EN ISO 7096:2008Earth-moving machinery. Laboratory evaluationof operator seat vibration

CORRIGENDUM 1

B/513/1

BS EN 13084-7:2005Free-standing chimneys. Product specificationsof cylindrical steel fabrications for use in singlewall steel chimneys and steel liners

CORRIGENDUM 1

B/506/14


Help Us to Help

You!

Always quote your Customer Number

Don’t know your number?

Contact Customer Services

020 8996 9001

who will be happy to check it for you

UPDATED BRITISHSTANDARDS

The following standards have beenamended and the amendments havebeen incorporated into an updatedstandard.

NOTE: Updated British Standardsmust be reordered as theamendments are not availableseparately.

BS 3951-2.1:1991+A5:2006(ISO 1496-1:1990+A5:2006)Freight containers. Specification and testing ofseries 1 freight containers. General cargocontainers for general purposes

AMENDMENT 5£62.00 members, £124.00 non-members

TW/1

Also incorporates Amendments 1, 2, 3 & 4

BS 4607-1:1984+A2:2010Non-metallic conduit fittings for electricalinstallations. Specification for fittings andcomponents of insulating material


PEL/213


BS 4607-5:1982+A3:2010Non-metallic conduit fittings for electricalinstallations. Specification for rigid conduits,fittings and boxes of insulating material


PEL/213


BS EN 453:2000+A1:2009Food processing machinery. Dough mixers.Safety and hygiene requirements


MCE/3/5

BS EN 869:2006+A1:2009Safety of machinery. Safety requirements forpressure metal diecasting units


MCE/3/10

BS EN 1057:2006+A1:2010Copper and copper alloys. Seamless, roundcopper tubes for water and gas in sanitary andheating applications


NFE/34/3

BS EN 1495:1997+A2:2009Lifting platforms. Mast climbing work platforms


MHE/12


BS EN 60384-16-1:2005Fixed capacitors for use in electronicequipment. Blank detail specification: Fixedmetallized polypropylene film dielectric D.C.capacitors. Assessment levels E and EZ

CORRIGENDUM 1

EPL/40X

BS EN 60384-21:2004Fixed capacitors for use in electronicequipment. Sectional specification: Fixedsurface mount multilayer capacitors of ceramicdielectric, Class 1

CORRIGENDUM 1

EPL/40X

BS EN 60384-21-1:2004Fixed capacitors for use in electronicequipment. Blank detail specification: Fixedsurface mount multilayer capacitors of ceramicdielectric, Class 1. Assessment level EZ

CORRIGENDUM 1

EPL/40X

BS EN 60384-22:2004Fixed capacitors for use in electronicequipment. Sectional specification: Fixedsurface mount multilayer capacitors of ceramicdielectric, Class 2

CORRIGENDUM 1

EPL/40X

BS EN 60384-22-1:2004Fixed capacitors for use in electronicequipment. Blank detail specification: Fixedsurface mount multilayer capacitors of ceramicdielectric, Class 2. Assessment level EZ

CORRIGENDUM 1

EPL/40X

BS EN 61051-1:2008Varistors for use in electronic equipment.Generic specification

CORRIGENDUM 1

EPL/40X

BS 4A 113:1999Specification for cadmium-plated, mushroom-headed, unified-thread, slotted drive, bolts

CORRIGENDUM 2

ACE/12


BS 4A 114:1999Specification for corrosion-resisting steel,mushroom-headed, slotted-drive, bolts(strength a class 880/1080)

CORRIGENDUM 1

ACE/12

BS EN 60384-2-1:2005Fixed capacitors for use in electronicequipment. Blank detail specification: Fixedmetallized polyethylene-terephthalate filmdielectric D.C. capacitors. Assessment levels Eand EZ

CORRIGENDUM 1

EPL/40X

BS EN 60384-3-1:2006Fixed capacitors for use in electronicequipment. Blank detail specification: Surfacemount fixed tantalum electrolytic capacitorswith manganese dioxide solid electrolyte.Assessment level EZ

CORRIGENDUM 2

EPL/40X


BS EN 60384-4-1:2007Fixed capacitors for use in electronicequipment. Blank detail specification: Fixedaluminium electrolytic capacitors with non-solidelectrolyte. Assessment level EZ

CORRIGENDUM 1

EPL/40X

BS EN 60384-8:2005Fixed capacitors for use in electronicequipment. Sectional specification: Fixedcapacitors of ceramic dielectric, Class 1

CORRIGENDUM 1

EPL/40X

BS EN 60384-8-1:2005Fixed capacitors for use in electronicequipment. Blank detail specification: Fixedcapacitors of ceramic dielectric, Class 1.Assessment level EZ

CORRIGENDUM 1

EPL/40X

BS EN 60384-9:2005Fixed capacitors for use in electronicequipment. Sectional specification: Fixedcapacitors of ceramic dielectric, Class 2

CORRIGENDUM 1

EPL/40X

BS EN 60384-9-1:2005Fixed capacitors for use in electronicequipment. Blank detail specification: Fixedcapacitors of ceramic dielectric, Class 2.Assessment level EZ

CORRIGENDUM 1

EPL/40X

BS EN 60384-13:2006Fixed capacitors for use in electronicequipment. Sectional specification. Fixedpolypropylene film dielectric metal foil D.C.capacitors

CORRIGENDUM 2

EPL/40X


BS EN 60384-16:2005Fixed capacitors for use in electronicequipment. Sectional specification: Fixedmetallized polypropylene film dielectric D.C.capacitors

CORRIGENDUM 1

EPL/40X

Corrigenda to British Standards continued...


Please

do not send

confirmation

of

orders placed by

telephone

as it can lead to

duplication

BS EN 13034:2005+A1:2009Protective clothing against liquid chemicals.Performance requirements for chemicalprotective clothing offering limited protectiveperformance against liquid chemicals (Type 6and Type PB [6] equipment)


PH/3/3

BS EN 13418:2004+A1:2008Plastics and rubber machines. Windingmachines for film or sheet. Safety requirements


MCE/3/2

BS EN 13544-2:2002+A1:2009Respiratory therapy equipment. Tubing andconnectors


CH/121/5

BS EN 13544-3:2001+A1:2009Respiratory therapy equipment. Airentrainment devices


CH/121/5

BS EN 14279:2004+A1:2009Laminated veneer lumber (LVL). Definitions,classification and specifications


B/541

BS EN 14605:2005+A1:2009Protective clothing against liquid chemicals.Performance requirements for clothing withliquid-tight (Type 3) or spray-tight (Type 4)connections, including items providingprotection to parts of the body only (Types PB[3] and PB [4])


PH/3/3

BS EN 14910:2007+A1:2009Garden equipment. Walk-behind combustionengine powered trimmers. Safety


AGE/20

BS EN 15056:2006+A1:2009Cranes. Requirements for container handlingspreaders


MHE/3

BS EN 50065-1:2001+A1:2010Signalling on low-voltage electrical installationsin the frequency range 3 kHz to 148,5 kHz.General requirements, frequency bands andelectromagnetic disturbances


PEL/205

BS EN ISO 11111-5:2005+A1:2009Textile machinery. Safety requirements.Preparatory machinery to weaving and knitting


TCI/33

BS EN ISO 11111-6:2005+A1:2009Textile machinery. Safety requirements. Fabricmanufacturing machinery


TCI/33

BS EN ISO 11111-7:2005+A1:2009Textile machinery. Safety requirements. Dyeingand finishing machinery


TCI/33

BS EN 12342:1998+A1:2009Breathing tubes intended for use withanaesthetic apparatus and ventilators


CH/121/5


BS EN 12472:2005+A1:2009Method for the simulation of wear andcorrosion for the detection of nickel releasefrom coated items


STI/53

BS EN 12864:2001+A3:2009Low-pressure, non adjustable regulators havinga maximum outlet pressure of less than orequal to 200 mbar, with a capacity of less thanor equal to 4 kg/h, and their associated safetydevices for butane, propane or their mixtures


GSE/24


BS EN 12965:2003+A2:2009Tractors and machinery for agriculture andforestry. Power take-off (PTO) drive shafts andtheir guards. Safety


AGE/6


BS EN 13001-1:2004+A1:2009Cranes. General design. General principles andrequirements


MHE/3

Also incorporates Corrigenda 1 & 2

BS EN 1501-1:1998+A2:2009Refuse collection vehicles and their associatedlifting devices. General requirements and safetyrequirements. Rear-end loaded refuse collectionvehicles


B/508/1


BS EN 1501-2:2005+A1:2009Refuse collection vehicles and associated liftingdevices. General requirements and safetyrequirements. Side loaded refuse collectionvehicles


B/508/1

BS EN 1820:2005+A1:2009Anaesthetic reservoir bags


CH/121/5

BS EN 1870-5:2002+A1:2009Safety of woodworking machines. Circularsawing machines. Circular saw benches/up-cutting cross-cut sawing machines


MTE/23

BS EN 1870-7:2002+A1:2009Safety of woodworking machines. Circularsawing machines. Single blade log sawingmachines with integrated feed table andmanual loading and/or unloading


MTE/23

BS EN 1999-1-1:2007+A1:2009Eurocode 9. Design of aluminium structures.General structural rules


B/525/9

BS EN ISO 11111-3:2005+A1:2009Textile machinery. Safety requirements.Nonwoven machinery


TCI/33

BS EN ISO 11111-4:2005+A1:2009Textile machinery. Safety requirements. Yarnprocessing, cordage and rope manufacturingmachinery


TCI/33


BRITISH STANDARDSREVIEWED ANDCONFIRMED

It is BSI policy for every standard to bereviewed by the technical committeeresponsible not more than five years afterpublication, to establish whether it is stillcurrent and, if it is not, to identify and setin hand appropriate action.

Confirmation indicates the continuingcurrency of a standard.

Where any standard in this list has beenamended since publication, confirmationincludes all amendments published todate. Reference to a particularamendment indicates that it is publishedconcurrently with the confirmation.

BS EN 597-1:1995Furniture. Assessment of the ignitability ofmattresses and upholstered bed bases. Ignitionsource: smouldering cigarette

FW/6

BS EN 597-2:1995Furniture. Assessment of the ignitability ofmattresses and upholstered bed bases. Ignitionsource: match flame equivalent

FW/6

BS EN 1022:2005Domestic furniture. Seating. Determination ofstability

FW/0

BS EN 1023-1:1997Office furniture. Screens. Dimensions

FW/0

BS EN 1023-2:2000Office furniture. Screens. Mechanical safetyrequirements

FW/0

BS EN 1023-3:2000Office furniture. Screens. Test methods

FW/0

BS EN 1129-1:1995Furniture. Foldaway beds. Safety requirementsand testing. Safety requirements

FW/0/2

BS EN 1129-2:1995Furniture. Foldaway beds. Safety requirementsand testing. Test methods

FW/0/2

BS EN 1130-1:1997Furniture. Cribs and cradles for domestic use.Safety requirements

CW/1/5

BS EN 1130-2:1996Furniture. Cribs and cradles for domestic use.Test methods

CW/1/5

BS EN 1334:1996Domestic furniture. Beds and mattresses.Methods of measurement and recommendedtolerances

FW/0/2

BS EN 1725:1998Domestic furniture. Beds and mattresses. Safetyrequirements and test methods

FW/0/2

BS EN 12727:2000Furniture. Ranked seating. Test methods andrequirements for strength and durability

FW/0

BS EN 14884:2005Air quality. Stationary source emissions.Determination of total mercury: automatedmeasuring systems

EH/2/1

DD CEN/TS 15674:2007Air quality. Measurement of stationary sourceemissions. Guidelines for the elaboration ofstandardised methods

EH/2/1

DD CEN/TS 15675:2007Air quality. Measurement of stationary sourceemissions. Application of EN ISO/IEC 17025:2005to periodic measurements

EH/2/1

BS ISO 3547-1:2006Plain bearings. Wrapped bushes. Dimensions

MCE/12

BS ISO 3547-2:2006Plain bearings. Wrapped bushes. Test data foroutside and inside diameters

MCE/12

BS ISO 3547-3:2006Plain bearings. Wrapped bushes. Lubricationholes, grooves and indentations

MCE/12

BS ISO 3547-4:2006Plain bearings. Wrapped bushes. Materials

MCE/12

BS ISO 17321-1:2006Graphic technology and photography. Colourcharacterization of digital still cameras (DSCs).Stimuli, metrology, and test procedures

CPW/42

BS EN 60335-2-24:2003+A2:2007Household and similar electrical appliances.Safety. Particular requirements for refrigeratingappliances, ice-cream appliances and ice-makers


CPL/61/3

Also incorporates Amendments 2 & 11 andCorrigenda 1

BS EN 60630:1998+A6:2009Maximum lamp outlines for incandescent lamps


CPL/34/1

Also incorporates Amendments 1, 2, 3, 4 & 5

BS EN 60730-2-14:1997+A2:2008Automatic electrical controls for household andsimilar use. Particular requirements for electricactuators


CPL/72


BS EN 60809:1996+A4:2009(IEC 809:1995)Lamps for road vehicles. Dimensional, electricaland luminous requirements


CPL/34/1

Also incorporates Amendments 1, 2 & 3

BS EN 61010-031:2002+A1:2008Safety requirements for electrical equipmentfor measurement, control and laboratory use.Safety requirements for hand-held probeassemblies for electrical measurement and test


EPL/66

BS EN 61347-1:2001+A1:2008Lamp controlgear. General and safetyrequirements


CPL/34/3


NA to BS EN 1999-1-1:2007+A1:2010UK National Annex to Eurocode 9. Design ofaluminium structures. General structural rules


B/525/9

Updated British Standards continued...


To order visit


BS 3510:1968Specification for a basic symbol to denote theactual or potential presence of ionizingradiation

NCE/2

This standard has been withdrawn as it issuperseded by ISO 361:1975 which was neveradopted as a British Standard

BS 4248:2004Supersulfated cement

B/516/6

Superseded by BS EN 15743:2010

BS 4540-2:1982Sampling of spices and condiments. Method forpreparation of a ground sample for analysis

AW/7

Superseded by BS EN ISO 2825:2010

BS 4899-1:1991Guide to user’s requirements for technicalmanuals (based on the principles of BS 4884).Content

DS/1

This standard has been withdrawn as it conflictswith BS EN 62079:2001

BS 4899-2:1992Guide to user’s requirements for technicalmanuals (based on the principles of BS 4884).Presentation

DS/1

This standard has been withdrawn as it conflictswith BS EN 62079:2001

BS 5045-2:1989Transportable gas containers. Specification forsteel containers of 0.5 L up to 450 L watercapacity with welded seams

PVE/3/3

Superseded by BS EN 13322-1:2003+A1:2006

BS 5950-3.1:1990+A1:2010Structural use of steelwork in building. Designin composite construction. Code of practice fordesign of simple and continuous compositebeams

B/525/4

Superseded by BS EN 1994-1-1:2004

BS 6200-3.22.2:1985Sampling and analysis of iron, steel and otherferrous metals. Methods of analysis.Determination of nitrogen. Steel:spectrophotometric method

ISE/102


BS 6201-1:1982Fixed capacitors for use in electronicequipment. Methods of test

EPL/40X

Superseded by BS EN 60384-1:2009

BS 6911-14:1998Testing earth-moving machinery. Crawlermachines. Performance requirements and testprocedures for braking systems

B/513/1

Superseded by BS ISO 10265:2008

BS 5288:1976Specification. Sealed radioactive sources

NCE/2

This standard has been proposed for obsolescenceas the techniques are old but it is considered thatthere still is a small level of use

BRITISH STANDARDSPROPOSED FORWITHDRAWAL

A note of any objections to thesewithdrawals should be sent to DebbieStead, Head of Committee Service Centre– Operations, BSI Head Office, 389Chiswick High Road, London W4 4AL orvia email [email protected] by30 June, 2010.

Where any standard in this list has beenamended since publication, a proposal towithdraw also includes all amendmentspublished to date.

BS EN 61300-2-30:1997Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures. Tests. Solar radiation

GEL/86/2

This standard has been proposed for withdrawal asthe European Standard has been proposed forwithdrawal by CENELEC

BRITISH STANDARDSWITHDRAWN

If any standard in this list has beenamended since publication, allamendments published to date are alsowithdrawn

BS 611-2:1990Petri dishes. Specification for plastics Petridishes for single use

LBI/36


BS 1384-1:1985Photographic density measurements. Guide forterms, symbols and notations

CPW/42

Superseded by BS ISO 5-1:2009

BS 1384-2:2001Photographic density measurements. Geometricconditions for transmission density

CPW/42


BS 3385:1973Specification for direct reading pocket typeelectroscope exposure meters

NCE/2

This standard has been withdrawn as it is no longerused by the industry

BRITISH STANDARDSPROPOSED FORDECLARATION OFOBSOLESCENCE

Declaration of obsolescence indicates thatthe standard is not recommended for usein new equipment, but needs to beretained for the servicing of existingequipment that is expected to have along working life.

A note of any objections to the proposalsbelow should be sent to Debbie Stead,Head of Committee Service Centre –Operations, BSI Head Office, 389 ChiswickHigh Road, London W4 4AL or via emailto [email protected] 30 June, 2010.

BS 3455:1973Glossary of terms used in nuclear science andtechnology

NCE/2


BS 3664:1963Specification for film badges for personnelradiation monitoring

NCE/2


BS 3775:1964Specification for counting trays (planchets) forradioactive assay

NCE/2


BS 3890:1965General recommendations for the testing,calibration and processing of radiationmonitoring films

NCE/2


BS 4247-1:1981Surface materials for use in radioactive areas.Methods of measuring and evaluating thedecontamination factor

NCE/2


BS 4247-2:1982Surface materials for use in radioactive areas.Guide to the selection of materials

NCE/2



BS EN 60745-2-21:2007Hand-held motor-operated electric tools. Safety.Particular requirements for drain cleaners

CPL/116


BS EN 61557-8:1997Electrical safety in low voltage distributionsystems up to 1000 V A.C. and 1500 V D.C.Equipment for testing, measuring ormonitoring of protective measures. Insulationmonitoring devices for IT systems

PEL/85


BS QC 300000:1983Harmonized system of quality assessment forelectronic components. Fixed capacitors for usein electronic equipment. Generic specification

EPL/40X


BS QC 300100:1991Harmonized system of quality assessment forelectronic components. Fixed capacitors for usein electronic equipment. Sectional specification:fixed polyethylene-terephthalate film dielectricmetal foil D.C.. capacitors

EPL/40X


BS QC 300301:1993Specification for harmonized system of qualityassessment for electronic components. Blankdetail specification. Fixed capacitors for use inelectronic equipment. Aluminium electrolyticcapacitors with non-solid electrolyte.Assessment level E

EPL/40X


BS QC 300400:1983Harmonized system of quality assessment forelectronic components. Fixed capacitors for usein electronic equipment. Sectional specification:fixed metallized polyethylene terephthalatefilm dielectric D.C. capacitors

EPL/40X


BS QC 300401:1984Specification for harmonized system of qualityassessment for electronic components. Fixedcapacitors for use in electronic equipment.Blank detail specification: fixed metallizedpolyethylene terephthalate film dielectric D.C.capacitors. Assessment level E

EPL/40X


BS QC 300600:1991Harmonized system of quality assessment forelectronic components. Fixed capacitors for usein electronic equipment. Sectional specificationfor fixed capacitors of ceramic dielectric, class 1

EPL/40X


BS EN 13702-2:2003(BS 2000-514:2003)Methods of test for petroleum and its products.Bitumen and bituminous binders.Determination of dynamic viscosity of modifiedbitumen. Coaxial cylinders method

PTI/13

Superseded by the dual numbered standardBS EN 13302:2010, BS 2000-505:2010

BS EN 14896:2006(BS 2000-546:2006)Bitumen and bituminous binders. Dynamicviscosity of bituminous emulsions, cut-back andfluxed bituminous binders. Rotating spindleviscometer method

PTI/13

Superseded by the dual numbered standardBS EN 13302:2010, BS 2000-505:2010

DD CEN/TS 14961:2005Solid biofuels. Fuel specifications and classes

PTI/17


DD CEN ISO/TS 17234:2003Leather. Chemical tests. Determination ofcertain azo colourants in dyed leathers

TCI/69

Superseded by BS EN ISO 17234-1:2010

BS EN 23908:1993Hardmetals. Determination of insoluble (free)carbon content. Gravimetric method

ISE/65


BS EN 25821:1992Resistance spot welding electrode caps

WEE/29


BS CECC 30801:1993Specification for harmonized system of qualityassessment for electronic components. Blankdetail specification. Tantalum surface mountingcapacitors

EPL/40X


BS EN 50015:1998Electrical apparatus for potentially explosiveatmospheres. Oil immersion “o”

GEL/31/17


DD CLC/TS 50131-4:2006Alarm systems. Intrusion and hold-up systems.Warning devices

GW/1/1


BS EN 60318-2:1998Electroacoustics. Simulators of human head andear. An interim acoustic coupler for thecalibration of audiometric earphones in theextended high-frequency range

EPL/29


BS 7723-4:1995Methods for calibration of vertical cylindricaltanks for petroleum and liquid petroleumproducts. Internal electro-optical distance-ranging method

PTI/12


BS 7780-3:1994Rotary shaft lip type seals. Storage, handlingand installation

MCE/11


BS 7839:1995Solid hardmetal end-mills with parallel shanks.Dimensions

MTE/18


BS EN 550:1994Sterilization of medical devices. Validation androutine control of ethylene oxide sterilization

CH/198


BS EN 632:1996Agricultural machinery. Combine harvesters andforage harvesters. Safety

AGE/32


BS EN 980:2003Graphical symbols for use in the labelling ofmedical devices

CH/210/3

Superseded by BS EN 980:2008

BS EN 1713:1998Non-destructive testing of welds. Ultrasonictesting. Characterization of indications in welds

WEE/46


BS EN ISO 9445:2006Continuously cold-rolled stainless steel narrowstrip, wide strip, plate/sheet and cut lengths.Tolerances on dimensions and form

ISE/105

Superseded by BS EN ISO 9445-1:2010 andBS EN ISO 9445-2:2010

BS EN 12062:1998Non-destructive examination of welds. Generalrules for metallic materials

WEE/46


BS EN 13689:2002Guidance on the classification and design ofplastics piping systems used for renovation

PRI/88/3


British Standards Withdrawn continued...


BS ISO 11929-6:2005Determination of the detection limit anddecision threshold for ionizing radiationmeasurements. Fundamentals and applicationsto measurements by use of transient mode

NCE/2


BS ISO 11929-7:2005Determination of the detection limit anddecision threshold for ionizing radiationmeasurements. Fundamentals and generalapplications

NCE/2


BS ISO 11929-8:2005Determination of the detection limit anddecision threshold for ionizing radiationmeasurements. Fundamentals and applicationto unfolding of spectrometric measurementswithout the influence of sample treatment

NCE/2


BS ISO/IEC 13335-1:2004Information technology. Security techniques.Management of information andcommunications technology security. Conceptsand models for information andcommunications technology securitymanagement

IST/33

This standard has been withdrawn. A call forcontributions was issued by the ISO/IEC JTC 1/SC 27Secretariat to National Bodies to the periodic pre-review of ISO/IEC 13335-1:2004. It was unanimouslyagreed that the standard should be withdrawn asthe material contained in ISO/IEC 27000:2009 andISO/IEC 27005:2008 have made ISO/IEC 13335-1:2004 redundant

BS ISO/TR 14696:1999Reaction to fire tests. Determination of fireparameters of materials, products andassemblies using an intermediate scale heatrelease calorimeter (ICAL)

FSH/21

This standard has been withdrawn as it issuperseded by ISO 14696:2009 which will not beimplemented as a British Standard

BS IEC 60079-19:1993Electrical apparatus for explosive gasatmospheres. Repair and overhaul forapparatus used in explosive atmospheres (otherthan mines or explosives)

GEL/31/11


BS IEC 61010-3-1:1997Safety requirements for electrical equipmentfor measurement, control, and laboratory use.Conformity verification report for IEC 61010-1

EPL/66

This standard has been withdrawn as theInternational Standard has been withdrawn by IEC

DD IEC/TS 61850-80-1:2009Communication networks and systems forpower utility automation. Guideline toexchanging information from a CDC-based datamodel using IEC 60870-5-101 or IEC 60870-5-104

PEL/57

Superseded by DD CLC/TS 61850-80-1:2010

BS QC 301901:1992Specification for harmonized system of qualityassessment for electronic components. Fixedcapacitors for use in electronic equipment.Blank detail specification. Fixed multilayerceramic chip capacitors. Assessment level E

EPL/40X

Superseded by BS EN 60384-21:2004, BS EN 60384-21-1:2004, BS EN 60384-22:2004 andBS EN 60384-22-1:2004

BS QC 420000:1992Harmonized system of quality assessment forelectronic components. Varistors for use inelectronic equipment: generic specification

EPL/40X


BS ISO 6580:2005(BS 6339:2005)General-purpose industrial fans. Circularflanges. Dimensions

MCE/17


BS ISO 11929-1:2000Determination of the detection limit anddecision threshold for ionizing radiationmeasurements. Fundamentals and applicationto counting measurements without theinfluence of sample treatment

NCE/2


BS ISO 11929-2:2000Determination of the detection limit anddecision threshold for ionizing radiationmeasurements. Fundamentals and applicationto counting measurements with the influenceof sample treatment

NCE/2


BS ISO 11929-3:2000Determination of the detection limit anddecision threshold for ionizing radiationmeasurements. Fundamentals and applicationto counting measurements by high resolutiongamma spectrometry, without the influence ofsample treatment

NCE/2


BS ISO 11929-4:2001Determination of the detection limit anddecision threshold for ionizing radiationmeasurements. Fundamentals and applicationto measurements by use of linear-scaleanalogue ratemeters, without the influence ofsample treatment

NCE/2


BS ISO 11929-5:2005Determination of the detection limit anddecision threshold for ionizing radiationmeasurements. Fundamentals and applicationsto counting measurements on filters duringaccumulation of radioactive material

NCE/2


BS QC 300601:1993Harmonized system of quality assessment forelectronic components. Fixed capacitors for usein electronic equipment. Blank detailspecification. Fixed capacitors of ceramicdielectric, class 1. Assessment level E

EPL/40X


BS QC 300700:1992Harmonized system of quality assessment forelectronic components. Fixed capacitors for usein electronic equipment. Sectional specificationfor fixed capacitors of ceramic dielectric, class 2

EPL/40X


BS QC 300701:1993Harmonized system of quality assessment forelectronic components. Fixed capacitors for usein electronic equipment. Blank detailspecification. Fixed capacitors of ceramicdielectric, class 2. Assessment level E

EPL/40X


BS QC 300801:1993Harmonized system of quality assessment forelectronic components. Fixed capacitors for usein electronic equipment. Blank detailspecification. Fixed tantalum chip capacitors.Assessment level E

EPL/40X


BS QC 301200:1983Harmonized system of quality assessment forelectronic components. Fixed capacitors for usein electronic equipment. Sectional specification:fixed metallized polypropylene film dielectricd.c. capacitors

EPL/40X


BS QC 301201:1984Specification for harmonized system of qualityassessment for electronic components. Fixedcapacitors for use in electronic equipment.Blank detail specification: fixed metallizedpolypropylene film dielectric d.c. capacitors.Assessment level E

EPL/40X


BS QC 301800:1991Harmonized system of quality assessment forelectronic components. Fixed capacitors for usein electronic equipment. Sectional specificationfor fixed polypropylene film dielectric metal foild.c. capacitors

EPL/40X


BS QC 301900:1992Harmonized system of quality assessment forelectronic components. Fixed capacitors for usein electronic equipment. Sectional specificationfor fixed multilayer ceramic chip capacitors

EPL/40X

Superseded by BS EN 60384-21:2004, BS EN 60384-21-1:2004, BS EN 60384-22:2004 andBS EN 60384-22-1:2004


BS 8020 (Revision)Tools for live working. Insulating hand tools forwork on or near conductor rail systemsoperating at voltages up to 1000 V A.C. or 1500 V D.C.

will supersede BS 8020:2002

PEL/78

BS 8204-6:2008/Amendment 1Screeds, bases and in situ floorings. Syntheticresin floorings. Code of practice

B/507/6

BS 8542-1Building modelling shapes and symbols library.Recommended 2D symbols and shaperepresentations of building and engineeringelements for use in building informationmodelling software

B/555

BS 8544Guide on life cycle costing during the in-usephase

B/500/3

BS 8877Online recruitment services. Code of practice

SVS/9

BS 8909Specification for a sustainability managementsystem for film

SDS/1/7

BS EN 3-8 (Revision)Portable fire extinguishers. Additionalrequirements to EN 3-7 for the construction,resistance to pressure and mechanical tests forextinguishers with a maximum allowablepressure equal to or lower than 30 bar

will supersede BS EN 3-8:2006

FSH/2

BS EN 30-1-1:2008/Amendment 2Domestic cooking appliances burning gas.Safety. General

GSE/35

BS EN WI 00207205Non-domestic storage furniture. Test methodsfor the determination of strength, durabilityand stability

FW/0/4

BS EN WI JW001001Energy audits. General

SEM/1/1

BS EN 593:2009/Amendment 1Industrial valves. Metallic butterfly valves

PSE/18/3

BS EN 716-1:2008/Amendment 1Furniture. Children’s cots and folding cots fordomestic use. Safety requirements

CW/1/5

BS EN 716-2:2008/Amendment 1Furniture. Children’s cots and folding cots fordomestic use. Test methods

CW/1/5

BS EN 13900-5:2005Pigments and extenders. Methods of dispersionand assessment of dispersibility in plastics.Determination by filter pressure value test

STI/1

BS EN 14787:2005Fertilizers and liming materials. Determinationof water content. Guidelines andrecommendations

CII/37

BS EN 14888:2005Fertilizers and liming materials. Determinationof cadmium content

CII/37

NEW WORK STARTED

The reference number of the committeeresponsible for each item of new workstarted is given after each entry.

Where a work item has the temporarydesignation “BS EN XXXX”, it has not yetbeen allocated a standard number by theEuropean standards body.

BS 644:2009/Amendment 1Timber windows. Fully finished factory-assembled windows of various types.Specification

B/538/1

BS XXXXWater consumption in buildings. Code ofpractice

B/504

BS 2869 (Revision)Fuel oils for agricultural, domestic andindustrial engines and boilers. Specification


PTI/2

BS 6164 (Revision)Code of practice for safety in tunnelling in theconstruction industry


B/513

BS 6259 (Revision)Code of practice for the design, planning,installation, testing and maintenance of soundsystems


EPL/100

BS 6896 (Revision)Specification for installation of gas-firedoverhead radiant heaters for industrial andcommercial heating (2nd and 3rd family gases)


GSE/30

BS 7371-6:1998/Amendment 1Coatings on metal fasteners. Specification forhot dipped galvanized coatings

FME/9/1

BS AU 50-1.1.4b:1996Tyres and wheels. Tyres. Car tyres. Method oftest for verifying tyre capabilities

AUE/4


BS AU 50-1.4.3a:1992Tyres and wheels. Tyres. Agricultural tractor andmachine tyres. Specification for classificationcodes and nomenclature for ply rating markedseries tyres

AUE/4


BS AU 175-2b:1983Vehicle identification numbers (VIN).Specification for world manufacturer identifier(WMI) codes

AUE/15


BRITISH STANDARDS UNDERREVIEW

The following British Standardsimplement International and/or EuropeanStandards which are currently underreview to see if they should be confirmed,revised or withdrawn.

Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL or via email [email protected] by30 June, 2010, in order to be consideredby the relevant UK Committee.

BS EN 1236:1995Fertilizers. Determination of bulk density (loose)

CII/37

BS EN 1237:1995Fertilizers. Determination of bulk density(tapped)

CII/37

BS EN ISO 7837:2001Fertilizers. Determination of bulk density (loose)of fine-grained fertilizers

CII/37

BS EN 12878:2005Pigments for the colouring of building materialsbased on cement and/or lime. Specifications andmethods of test

STI/1

BS EN 13366:2001Fertilizers. Treatment with a cation exchangeresin for the determination of the chelatedmicro-nutrient content and of the chelatedfraction of micro-nutrients

CII/37

BS EN 13368-1:2001Fertilizers. Determination of chelating agents infertilizers by ion chromatography. EDTA, HEDTAand DTPA

CII/37

British Standards Withdrawn continued...


BS EN 13175 (Revision)LPG equipment and accessories. Specificationand testing for liquefied petroleum gas (LPG)tank valves and fittings

will supersede BS EN 13175:2003

PVE/19

BS EN 13369 (Revision)Common rules for precast concrete products

will supersede BS EN 13369:2004+A1:2006

B/524

BS EN 14127 (Revision)Non-destructive testing. Ultrasonic thicknessmeasurement


WEE/46

BS EN 14276-1:2006/Amendment 1Pressure equipment for refrigerating systemsand heat pumps. Vessels. General requirements

RHE/18

BS EN 14276-2:2007/Amendment 1Pressure equipment for refrigerating systemsand heat pumps. Piping. General requirements

RHE/18

BS EN 14388 (Revision)Road traffic noise reducing devices.Specifications


B/509/6

BS EN 14961-2Solid biofuels. Fuel specifications and classes.Wood pellets for non-industrial use

PTI/17

BS EN 14961-3Solid biofuels. Fuel specifications and classes.Wood briquettes for non- industrial use

PTI/17

BS EN 14961-4Solid biofuels. Fuel specifications and classes.Wood chips for non-industrial use

PTI/17

BS EN 14961-5Solid biofuels. Fuel specifications and classes.Firewood for non-industrial use

PTI/17

BS EN 15011Cranes. Bridge & gantry cranes

MHE/3/3

BS EN 15022-4 (Revision)Copper and copper alloys. Determination of tincontent. Medium tin content. Flame atomicabsorption spectrometry method (FAAS)

will supersede DD CEN/TS 15022-4:2006

NFE/34

BS EN 15080-12Extended application of results from fireresistance tests. Load bearing masonry walls

FSH/22/2

BS EN 1793-6Road traffic noise reducing devices. Testmethod for determining the acousticperformance. Intrinsic characteristics. In situvalues of airborne sound insulation under directsound field conditions

B/509/6

BS EN ISO 8980-3 (Revision)Ophthalmic optics. Uncut finished spectaclelenses. Transmittance specifications and testmethods

will supersede BS EN ISO 8980-3:2004

CH/172/3

BS EN ISO 10380 (Revision)Pipework. Corrugated metal hoses and hoseassemblies

will supersede BS EN ISO 10380:2003

PSE/12

BS EN 12101-3 (Revision)Smoke and heat control systems. Specificationfor powered smoke and heat exhaustventilators


FSH/25

BS EN 12201-4 (Revision)Plastic piping systems for water supply.Polyethylene (PE). Valves


PRI/88/2

BS EN 12680-3 (Revision)Founding. Ultrasonic examination. Spheroidalgraphite cast iron castings


ISE/35

BS EN 12758 (Revision)Glass in building. Glazing and airborne soundinsulation. Product descriptions anddetermination of properties


B/520/4

BS EN 12859 (Revision)Gypsum blocks. Definitions, requirements andtest methods


B/544/1

BS EN 13126-1 (Revision)Building hardware. Requirements and testmethods for windows and doors heightwindows. Requirements common to all types ofhardware


B/538

BS EN 13126-3 (Revision)Building hardware, fittings for windows anddoor height windows. Requirements and testmethods. Manoeuvring fittings for espagnolettebolts/sliding button

will supersede DD CEN/TS 13126-3:2004

B/538

BS EN 836:1997/Amendment 4Garden equipment. Powered lawnmowers.Safety

AGE/20

BS EN 958:2006/Amendment 1Mountaineering equipment. Energy absorbingsystems for use in klettersteig (via ferrata)climbing. Safety requirements and test methods

SW/136/5

BS EN 1097-1 (Revision)Tests for mechanical and physical properties ofaggregates. Determination of the resistance towear (micro-Deval)


B/502/6

BS EN 1097-6 (Revision)Tests for mechanical and physical properties ofaggregates. Determination of particle densityand water absorption


B/502/6

BS EN 1110 (Revision)Flexible sheets for waterproofing. Bitumensheets for roof waterproofing. Determinationof flow resistance at elevated temperature


B/546/1

BS EN 1367-5 (Revision)Tests for thermal and weathering properties ofaggregates. Determination of resistance tothermal shock


B/502/6

BS EN 1370 (Revision)Founding. Surface roughness inspection byvisual tactile comparators


ISE/35

BS EN 1371-1 (Revision)Founding. Liquid penetrant inspection. Sand,gravity die and low pressure die castings


ISE/35

BS EN 1744-7Tests for chemical properties of aggregates.Determination of loss on ignition (LoI) ofMunicipal Incinerator Bottom Ash (MIBA)

B/502/6

BS EN 1793-1 (Revision)Road traffic noise reducing devices. Testmethod for determining the acousticperformance. Intrinsic characteristics of soundabsorption


B/509/6

BS EN 1793-2 (Revision)Road traffic noise reducing devices. Testmethod for determining the acousticperformance. Intrinsic characteristics of airbornesound insulation


B/509/6


BS EN 60874-1-1 (Revision)Connectors for optical fibres and cables. Blankdetail specification

will supersede BS EN 60874-1-1:2007

GEL/86/2

BS EN 61175 (Revision)Industrial systems, installation and equipmentand industrial products. Designation of signals


GEL/3

BS EN 61274-1 (Revision)Adaptors for fibre optic connectors. Genericspecification


GEL/86/2

BS EN 61274-1-1 (Revision)Adaptors for fibre optic connectors. Blank detailspecification


GEL/86/2

BS EN 61300-2-52Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures. Tests. Bending test for cords

GEL/86/2

BS EN 61314-1 (Revision)Fibre optic interconnecting devices and passivecomponents. Fibre optic fan-outs. Genericspecification


GEL/86/2

BS EN 61314-1-1 (Revision)Fibre optic fan-outs. Blank detail specification


GEL/86/2

BS EN 61439-4Low-voltage switchgear and controlgearassemblies. Particular requirements forassemblies for construction sites (A CS)


PEL/17/3

BS EN 61753-071-2Fibre optic interconnecting devices and passivecomponents performance standard. Non-connectorised single-mode fibre optic 1 x 2 and2 x 2 spatial switches for category C. Controlledenvironments

GEL/86/2

BS EN 61753-088-2Fibre optic interconnecting devices and passivecomponents performance standard. Non-connectorised single-mode fibre optic LANWDM devices with channel spacing of 800 GHzfor category C. Controlled environments

GEL/86/2

BS EN 62005-9-1Fibre optic interconnecting devices and passivecomponents. Reliability. Qualification of passiveoptical components

GEL/86/2

PD CEN/TR 16110Characterization of waste. Guidance on the useof ecotoxicity tests applied to waste

B/508/3

DD CEN/TS 16115Ambient air quality. Measurement ofbioaerosols. Determination of moulds usingfilter sampling systems and cultivation basedanalyses

EH/2/1

BS EN 16117-1Copper and copper alloys. Determination ofcopper content. Electrolytic determination ofcopper in materials with copper content lessthan 99, 85%

NFE/34

BS EN 16119LPG equipment and accessories. Sealing capsand plugs for cylinder and tank valves.Specification and testing

PVE/19

PD CEN ISO/TR 20573 (Revision)Footwear. Performance requirements forcomponents for footwear. Heels and top pieces

will supersede PD ISO/TR 20573:2006

TCI/69

BS EN 50085-2-1:2006/Amendment 1Cable trunking systems and cable ductingsystems for electrical installations. Cabletrunking systems and cable ducting systemsintended for mounting on walls and ceilings

PEL/213

BS EN 50495Safety devices required for the safe functioningof equipment with respect to explosion risks

GEL/31

BS EN 60335-2-40 (Revision)Household and similar electrical appliances.Safety. Particular requirements for electricalheat pumps, air-conditioners and dehumidifiers

will supersede BS EN 60335-2-40:2003+A2:2009

CPL/61/4

BS EN 60603-7-1 (Revision)Connectors for electronic equipment. Detailspecification for 8-way, shielded, free and fixedconnectors


EPL/48

BS EN 60734 (Revision)Household electrical appliances. Performance.Hard water for testing


CPL/59/1

BS EN 60874-1 (Revision)Connectors for optical fibres and cables. Genericspecification


GEL/86/2

BS EN 15085-1:2007/Amendment 1Railway applications. Welding of railwayvehicles and components. General

RAE/1/-/2

BS EN 15151-1Mountaineering equipment. Braking devices.Braking devices with assisted locking, safetyrequirements and test methods

SW/136/5

BS EN 15151-2Mountaineering equipment. Braking devices.Manual braking devices, safety requirementsand test methods

SW/136/5

BS EN 15202 (Revision)LPG equipment and accessories. Essentialoperational dimensions for LPG cylinder valveoutlet and associated equipment connections


PVE/19

BS EN 15234-1Solid biofuels. Fuel quality assurance. Generalrequirements

will supersede DD CEN/TS 15234:2006

PTI/17

BS EN 15303-1Design and application of plasterboard systemson frames. General principles of design

B/544/3

BS EN 15415-1Solid recovered fuels. Determination of particlesize distribution. Screen method for smalldimension particles

will supersede DD CEN/TS 15415:2006

PTI/17

BS EN 15502-1Gas-fired heating boilers. General requirementsand tests

GSE/29

BS EN 15502-2-1Gas-fired heating boilers. Specific standard fortype C appliances and type B2, B3 and B5appliances of a nominal heat input notexceeding 1000 kW

GSE/29

DD CEN/TS 15916-1Copper and copper alloys. Determination oftellurium content. Low tellurium content. Flameatomic absorption spectrometric method (FAAS)

NFE/34

BS EN 16105Paints and varnishes. Leaching of substancesfrom coatings. Laboratory immersion method

STI/28

BS EN 16109Fertilizers. Determination of micro-nutrient ionscomplexed in fertilizers. Identification oflignosulfonates

CII/37

New Work Started continued...


BS ISO 15639Standardisation of the injection site of differentanimal species

AGE/6/1

PD ISO/TR 16314Rubber. Measurement of the aromaticity of oilin reclaimed rubbers

PRI/23

BS ISO 16331-1Optics and optical instruments. Laboratoryprocedures for testing surveying andconstruction instruments. Performance ofhandheld laser distance meters

CPW/172/6

BS ISO 17123-5Optics and optical instruments. Field proceduresfor testing geodetic and surveying instruments.Electronic tacheometers

CPW/172/6

BS ISO 17378-1Water quality. Determination of arsenic.Method using hydride generation atomicfluorescence spectrometry (HG-AFS)

EH/3/2

BS ISO 17378-2Water quality. Determination of arsenic.Method using hydride generation atomicabsorption spectrometry (HG-AAS)

EH/3/2

BS ISO 17379-1Water quality. Determination of selenium.Method using hydride generation atomicfluorescence spectrometry (HG-AFS)

EH/3/2

BS ISO 17379-2Water quality. Determination of selenium.Method using hydride generation atomicabsorption spectrometry (HG-AAS)

EH/3/2

BS ISO 18754Fine ceramics (advanced ceramics, advancedtechnical ceramics). Determination of densityand apparent porosity

RPI/13

BS ISO 19973-1 (Revision)Pneumatic fluid power. Assessment ofcomponent reliability by testing. Generalprocedures

will supersede BS ISO 19973-1:2007

MCE/18

BS ISO 19973-2 (Revision)Pneumatic fluid power. Assessment ofcomponent reliability by testing. Directionalcontrol valves


MCE/18

BS ISO 19973-3 (Revision)Pneumatic fluid power. Assessment ofcomponent reliability by testing. Cylinders withpiston rod


MCE/18

BS ISO 7700-2Methods for analysis of oilseeds. Check of thecalibration of moisture meters

will supersede BS 4289-8:1988

AW/307

BS ISO 8373 (Revision)Manipulating industrial robots. Vocabulary


AMT/4

BS ISO 8784-1 (Revision)Pulp, paper and board. Microbiologicalexamination. Total count of bacteria, yeast andmould based on disintegration


PAI/11

BS ISO 13372 (Revision)Condition monitoring and diagnostics ofmachines. Vocabulary

will supersede BS ISO 13372:2004

GME/21/7

BS ISO 13517Metallic powders. Determination of flowrate bymeans of a calibrated funnel (Gustavssonflowmeter)

ISE/65

BS ISO 13926-3Pen systems. Seals for pen-injectors for medicaluse

CH/212

BS ISO 14229-1Road vehicles. Unified diagnostic services (UDS).Specification and requirements


AUE/16

BS ISO 14229-2Road vehicles. Unified diagnostic services (UDS).Session layer services

AUE/16

BS ISO 14641-1Electronic archiving. Specifications concerningthe design and the operation of an informationsystem for electronic information preservation

IDT/1/3

PD ISO/IEC TR 14763-2-1Information technology. Generic cabling.Implementation and operation of customerpremises cabling. Identifiers withinadministration systems

TCT/7

BS ISO 14903Refrigerating systems and heat pumps.Qualification of tightness of components andjoints

RHE/18

BS ISO 15081 (Revision)Agricultural irrigation equipment. Graphicalsymbols for pressurized irrigation systems


AGE/30

BS EN 62271-101:2006/Amendment 2High-voltage switchgear and controlgear.Synthetic testing

PEL/17/1

BS EN 62638Recurrent test and test after repair andmodification of electrical equipment

PEL/85

BS EN 62642-8Alarm systems. Intrusion and hold-up systems.Security fog device/systems

GW/1/1

BS EN 62674-1High frequency inductive components. Fixedsurface mount inductors for use in electronicand telecommunication equipment

EPL/51

BS EN 67287-2Maritime navigation and radiocommunicationequipment and systems Class B shipborneequipment of the automatic identificationsystem (AIS). Self-organising time divisionmultiple access (SOTDMA)

EPL/80

BS EN 140401-802:2007/Amendment 1Detail specification. Fixed low power film SMDresistors. Rectangular. Stability classes 1; 2

EPL/40X

BS EN 140401-803:2007/Amendment 1Detail specification. Fixed low power film SMDresistors. Cylindrical. Stability classes 0,05; 0,1;0,25; 0,5; 1; 2

EPL/40X

BS ISO 1652:2004/Amendment 1Rubber latex. Determination of apparentviscosity by the Brookfield test method

PRI/50

BS ISO 3316Assembly tools for screws and nuts.Attachments for hand-operated square drivesocket wrenches. Dimensions and tests

MTE/15

BS ISO 4548-7Full-flow lubricating oil filters for internalcombustion engines. Method of test forvibration fatigue

will supersede BS 7403-7:1991

MCE/21/5

BS ISO 5270 (Revision)Pulps. Laboratory sheets. Determination ofphysical properties


PAI/11

BS ISO 5294Synchronous belt drives. Pulleys

MCE/10

BS ISO 7176-25Wheelchairs. Batteries and chargers forpowered wheelchairs. Requirements and testmethods

CH/173/1


10/30210204 DCBS 8543 Financial services compliance.Framework

SVS/6/2

10/30218583 DCBS 2869 Fuel oils for agricultural, domestic andindustrial engines and boilers. Specification

PTI/2

10/30218774 DCBS 8878 Web accessibility. Code of practice

IST/45

DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –ADOPTIONS

All Draft British Standards are availablefrom BSI Customer Services (see ’How toorder’ on page 2)

Most drafts are charged at£10.00 to members and£20.00 to non-members.

Larger draft documents are charged at ahigher price according to the number ofpages and are priced individually below.

Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL by 30 June, 2010 unlessotherwise stated, to be considered by therelevant BSI committee.

Draft standards may be modified beforeadoption and issue as British Standards.

10/30086524 DCBS ISO 10844 Acoustics. Specification of testtracks for measuring noise emitted by roadvehicles and their tyres

EH/1/2

Comments for the above document are required by4 June, 2010

10/30089025 DCBS ISO/IEC 14492 AMD3 Informationtechnology. Lossy/lossless coding of bi-levelimages

IST/37

10/30116426 DCBS EN 50136-1-7 Alarm systems. Alarmtransmission systems and equipment. Part 1-7.Requirements for common protocol for alarmtransmission using packet switched network

GW/1/5

Comments for the above document are required by30 August, 2010

10/30145959 DCBS ISO/IEC 19795-5 Information Technology.Biometric performance testing and reporting.Part 5. Grading scheme for access controlscenario evaluation

IST/44

Comments for the above document are required by31 May, 2010

BS ISO 28005-1Security management systems for the supplychain. Electronic port clearance (EPC). Messagestructures

SME/32

BS ISO 30005Ship recycling management systems.Information control for hazardous materials inthe manufacturing chain of ship building andship operations

SME/32

BS ISO 80003-3Physiological quantities and their units.Chemistry

SS/7

PD 6695-3-1Background Paper to the UK National Annex toBS EN 1993-3-1

B/525

PAS 83 (Revision)Guidance on codes of practice, standardisedmethods and regulations for cell-basedtherapeutics

will supersede PAS 83:2006

DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –NATIONAL BRITISHSTANDARDS

You may now comment on any NationalBritish Standard online. BSI BritishStandards has launched a Draft Reviewsystem which allows access to the draftsof all National British Standards. Toenhance access of Drafts for PublicComment for the wider community, makecomments more visible and move intocollaborative working practices, you willnow be able to comment on any NationalBritish Standard by visitinghttp://www.bsigroup.com/drafts. Allyou need to do is register. This service isfree of charge.

Please note that the only standardsavailable on this service are pure BritishStandards (National Standards e.g:BS XXXX). European and internationaldocuments are not included at this time.

Deadlines for receipt of comments oneach of the individual drafts can be foundat http://www.bsigroup.com/drafts.The deadline for the following drafts is30 June, 2010 unless otherwise stated.

Should you wish to receive these drafts inhard copy format, they are available for afee from BSI Customer Services (see ’Howto order’ on page 2).

10/30173459 DCBS 8452 Use of clamp-on (externally mounted)ultrasonic flow-metering techniques for fluidapplications. Guide

CPI/30/5

BS ISO 20022-1 (Revision)Financial services. UNIversal Financial industrymessage scheme. Overall methodology andformat specifications for inputs to and outputsfrom the ISO 20022 repository


IST/12

BS ISO 20022-2 (Revision)Financial services. UNIversal Financial Industrymessage scheme. Roles and responsibilities ofthe registration bodies


IST/12

BS ISO 20022-3Financial services. UNIversal Financial Industrymessage scheme. Modelling

IST/12

BS ISO 20022-4Financial services. UNIversal Financial Industrymessage scheme. XML Schema Generation

IST/12

BS ISO 20022-5Financial services. UNIversal Financial Industrymessage scheme. Reverse Engineering

IST/12

BS ISO 20022-7Financial services. UNIversal Financial Industrymessage scheme. Registration

IST/12

BS ISO 20022-8Financial services. UNIversal Financial Industrymessage scheme. ASN.1 Generation

IST/12

BS ISO 21809-3:2008/Amendment 1Petroleum and natural gas industries. Externalcoatings for buried or submerged pipelinesused in pipeline transportation systems. Fieldjoint coatings

PSE/17/2

BS ISO 22300Societal security. Vocabulary

SSM/1

BS ISO 23914-1Water quality. Determination of antimony.Method using hydride generation atomicfluorescence spectrometry (HG-AFS)

EH/3/2

BS ISO 23914-2Water quality. Determination of antimony.Method using hydride generation atomicabsorption spectrometry (HG-AAS)

EH/3/2

BS ISO/IEC 24754-2Information technology. Minimum requirementsfor specifying document rendering systems.Formatting specifications for documentrendering systems

IST/41

New Work Started continued...


10/30200372 DCBS ISO 17359 Condition monitoring anddiagnostics of machines. General guidelines

GME/21/7

Comments for the above document are required by19 July, 2010

10/30201340 DCBS ISO 24294 Round and sawn timber.Vocabulary

B/543

10/30202469 DCBS ISO 12192 Paper and board. Determinationof compressive strength. Ring crush method

PAI/11

10/30203575 DCBS EN ISO 5403-1 Leather. Determination ofwater resistance of flexible leather. Part 1.Repeated linear compression (penetrometer)

TCI/69

10/30203578 DCBS EN 61577-3 Radiation protectioninstrumentation. Radon and radon decayproduct measuring instruments. Part 3. Specificrequirements on radon decay productmeasuring instruments

NCE/2

10/30204498 DCBS ISO/IEC 23000-5 Information technology.Multimedia application format (MPEG-A). Part5. Media streaming application format£18.00 members, £36.00 non-members

IST/37

10/30205468 DCBS EN 60297-3-107 Mechanical structures forelectronic equipment. Part 107. Dimensions ofsubracks and plug-in units, micro format

EPL/48


10/30205782 DCBS ISO 2954 Mechanical vibration of rotatingand reciprocating machinery. Requirements forinstruments for measuring vibration severity

GME/21/2


10/30205809 DCBS ISO 776 Pulps. Determination of acid-insoluble ash

PAI/11

10/30206130 DCBS EN 16012 Thermal insulation for buildings.Reflective insulation products. Determination ofthe declared thermal performance

B/540/9


10/30195043 DCBS EN ISO 22825 Non-destructive testing ofwelds. Ultrasonic testing. Testing of welds inaustenitic steels and nickel-based alloys

WEE/46

10/30196346 DCBS ISO 28005-2 Security management systemsfor the supply chain. Electronic port clearance(EPC). Part 2. Core data elements

SME/32

10/30196691 DCBS ISO 10988 Equipment for crop protection.Knapsack motorized sprayers. Test methods andperformance limits

AGE/15

10/30196884 DCBS EN ISO 9092 Textiles. Nonwoven. Definition

TCI/24

10/30196961 DCBS ISO 14470 Food irradiation. Requirementsfor the development, validation and routinecontrol of the ionizing radiation process usedfor the treatment of food

AW/90


10/30196989 DCBS ISO 12933 Agricultural tractors.Requirements for braking

AGE/6


10/30198657 DCBS EN 60695-7-1 Fire hazard testing. Part 7-1.Toxicity of fire effluent. General guidance

GEL/89

10/30198921 DCBS ISO 11891 Hot formed helical compressionsprings. Technical specifications

FME/9/3

10/30199110 DCBS ISO 3534-3 Statistics. Vocabulary andsymbols. Part 3. Design of experiments

SS/1

10/30199169 DCBS ISO 12406 Surface chemical analysis.Secondary ion mass spectrometry. Method fordepth profiling of arsenic in silicon

CII/60

10/30199179 DCBS ISO 28600 Surface chemical analysis. Datatransfer format for scanning-probe microscopy

CII/60

10/30200334 DCBS ISO 129-1 Technical drawings. Indication ofdimensions and tolerances. Part 1. Generalprinciples

TDW/4

10/30157037 DCBS ISO/IEC 24753 Information technology.Radio frequency identification (RFID) for itemmanagement. Application protocol. Encodingand processing rules for sensors and batteries

IST/34

10/30169922 DCBS EN ISO 10685-1 Ophthalmic optics.Spectacle frames and sunglasses electroniccatalogue and identification. Part 1. Productidentification and electronic catalogue producthierarchy

CH/172/3

10/30171677 DCBS ISO 11485-1 Glass in building. Curved glass.Part 1. Terminology and definitions

B/520/1


10/30171680 DCBS ISO 11485-2 Glass in building. Curved glass.Part 2. Quality requirements

B/520/1


10/30174936 DCBS ISO 11352 Water quality. Determination ofmeasurement uncertainty based on validationdata

EH/3/2

10/30175543 DCBS ISO/IEC 19784-4 Biometric applicationprogramming interface. Part 4. Biometric sensorfunction provider interface

IST/44


10/30187736 DCBS EN 1175-1 AMD1 Safety of industrial trucks.Electrical requirements. Part 1. Generalrequirements for battery powered trucks

MHE/7

10/30187739 DCBS EN 1175-2 AMD1 Safety of industrial trucks.Electrical requirements. Part 2. Generalrequirements of internal combustion enginepowered trucks

MHE/7

10/30187742 DCBS EN 1175-3 AMD1 Safety of industrial trucks.Electrical requirements. Part 3. Specificrequirements for the electric powertransmission systems of internal combustionengine powered trucks

MHE/7

10/30189302 DCBS EN ISO 19131 AMD1 Geographicinformation. Data product specifications

IST/36

10/30193837 DCBS EN ISO 3630-5 Dentistry. Root-canalinstruments. Part 5. Shaping and cleaninginstruments

CH/106/4


10/30214655 DCBS EN 16072 Intelligent transport systems.ESafety. Pan European eCall-Operatingrequirements

EPL/278

10/30214867 DCBS EN ISO 21049 Pumps. Shaft-sealing systemsfor centrifugal and rotary pumps£33.00 members, £66.00 non-members

MCE/6

10/30214877 DCBS ISO 17769-2 Liquid pumps and installation.General terms. Definitions, quantities, lettersymbols and units. Part 2. Pumping system

MCE/6

10/30214897 DCBS ISO 3898 Bases for design of structures.Names and symbols of physical quantities.Generic quantities

B/525/1


10/30214922 DCBS ISO 17769-1 Liquid pumps and installation.General terms. Definitions, quantities, lettersymbols and units. Part 1. Liquid pumps

MCE/6

10/30214931 DCBS EN 1534 Wood flooring. Determination ofresistance to indentation (Brinell). Test method

B/543

10/30214952 DCBS EN 14169-2 Protection profile for securesignature creation device. Part 2. Device withkey generation

IST/17

10/30214955 DCBS EN 13108-9 Bituminous mixtures. Materialspecifications. Part 9. Bituminous mixture forUltra-thin layer Asphalt Concrete (UTLAC)

B/510/1

10/30214958 DCBS EN 1915-1 Aircraft ground supportequipment. General requirements. Part 1. Basicsafety requirements

ACE/57

10/30214961 DCBS EN 12312-1 Aircraft ground supportequipment. Specific requirements. Part 1.Passenger stairs

ACE/57

10/30214964 DCBS EN 12312-9 Aircraft ground supportequipment. Specific requirements. Part 9.Container/pallet loaders

ACE/57

10/30214967 DCBS EN 14588 Solid biofuels. Terminology,definitions and descriptions

PTI/17


10/30209871 DCBS ISO 20176 Road vehicles. H-point machine(HPM II). Specifications and procedure for H-point determination

AUE/12

10/30210450 DCBS EN 61076-4-116 Connectors for electronicequipment. Product requirements. Part 4-116.Printed board connectors. Detail specificationfor a high-speed two-part connector withintegrated shielding function

EPL/48


10/30211442 DCBS EN 62047-10 Semiconductor devices. Microelectromechanical devices. Part 10. Micro-pillarcompression test for MEMS materials

EPL/47


10/30211446 DCBS EN 62047-11 Semiconductor devices. Micro-electromechanical devices. Part 11. Test methodfor linear thermal expansion coefficients ofMEMS materials

EPL/47


10/30212177 DCBS EN 12405-1 AMD2 Gas meters. Conversiondevices. Part 1. Volume conversion

GSE/25

10/30212192 DCBS ISO/IEC 15444-1 AMD3 Informationtechnology. JPEG 2000 image coding system.Part 1. Core coding system

IST/37

10/30213237 DCBS EN 16058 Influence of metallic materials onwater intended for human consumption.Dynamic rig test for assessment of surfacecoatings with nickel layers. Long-term testmethod

EH/6


10/30214018 DCBS EN 15722 Road transport and traffictelematics. ESafety. ECall minimum set of data

EPL/278

10/30214021 DCBS EN 16062 Intelligent transport systems.ESafety. ECall high level applicationrequirements (HLAP)

EPL/278

10/30214551 DCBS ISO 20126 Dentistry. Manual toothbrushes.General requirements and test methods

CH/106/7

10/30206580 DCBS ISO/IEC 29109-6 Information technology.Conformance testing methodology forbiometric data interchange formats defined inISO/IEC 19794. Part 6. Iris image data

IST/44


10/30206587 DCBS ISO/IEC 29109-8 Information technology.Conformance testing methodology forbiometric data interchange formats defined inISO/IEC 19794. Part 8. Finger pattern skeletaldata

IST/44


10/30207705 DCBS ISO/IEC 15444-11 AMD1 Informationtechnology. JPEG 2000 image coding system.Part 11. Wireless

IST/37

10/30207724 DCBS ISO 18941 Imaging materials. Colourreflection prints. Test method for ozone gasfading stability

CPW/42

10/30207740 DCBS ISO 12949 Standard test method formeasuring the heat release rate of lowflammability mattresses and mattress sets

FSH/21/7


10/30207746 DCBS ISO 20805 Hot-rolled steel sheet in coils ofhigher yield strength with improved formabilityand heavy thickness for cold forming

ISE/109

10/30209057 DCBS ISO 16000-6 Indoor air. Determination ofvolatile organic compounds in indoor and testchamber air by active sampling on Tenax TAsorbent, thermal desorption and gaschromatography using MS/FID

EH/2/3


10/30209149 DCBS EN ISO/IEC 15415 Information technology.Automatic identification and data capturetechniques. Bar code symbol print quality testspecification. Two-dimensional symbols

IST/34

10/30209768 DCBS ISO 13435 Textile machinery andaccessories. Bars for drop wires for electricalwarp stop motions

TCI/33

10/30209804 DCBS ISO 7870-4 Control charts. Cumulative sumcharts

SS/4

Draft British Standards for Public Comment continued...


10/30218217 DCBS EN 61314-1-1 Fibre optic interconnectingdevices and passive components. Fibre opticfan-outs. Part 1-1. Blank detail specification

GEL/86/2


10/30218221 DCBS EN 61314-1 Fibre optic interconnectingdevices and passive components. Fibre opticfanouts. Part 1. Generic specification

GEL/86/2


10/30218225 DCBS EN 60874-1 Fibre optic interconnectingdevices and passive components. Connectors foroptical fibres and cables. Part 1. Genericspecification

GEL/86/2


10/30218229 DCBS EN 60874-1-1 Fibre optic interconnectingdevices and passive components. Connectors foroptical fibres and cables. Part 1-1. Blank detailspecification

GEL/86/2


10/30218329 DCBS EN 62271-105 High-voltage switchgear andcontrolgear. Part 105. Alternating switch-fusecombinations

PEL/17/1


10/30218335 DCBS EN 60603-7-1 Connectors for electronicequipment. Part 7-1. Detail specification for 8-way, shielded, free and fixed connectors

EPL/48

10/30218388 DCBS EN 60730-2-9 AMD1 Automatic electricalcontrols for household and similar use. Part 2-9.Particular requirements for temperature sensingcontrols

CPL/72

10/30218397 DCBS EN 60745-1 AMD1 Hand-held motor-operated electric tools. Safety. Part 1. Generalrequirements

CPL/116

10/30218401 DCBS EN 61029-1 AMD1 Safety of transportablemotor-operated electric tools. Part 1. Generalrequirements

CPL/116

10/30218417 DCBS ISO 1652 AMD1 Rubber latex.Determination of apparent viscosity by theBrookfield test method

PRI/50

10/30216950 DCBS EN 13965-2 Characterization of waste.Terminology. Part 2. Management related termsand definitions

B/508/3

10/30217198 DCBS EN ISO 10426-2 Petroleum and natural gasindustries. Cements and materials for wellcementing. Part 2. Testing of well cements£18.00 members, £36.00 non-members

PSE/17/-/3

10/30217996 DCBS EN 61010-2-032 Safety requirements forelectrical equipment for measurement, control,and laboratory use. Part 2-032. Particularrequirements for hand-held and hand-manipulated current sensors for electrical testand measurement

EPL/66


10/30218149 DCBS EN 50085-2-1 AMD Cable trunking systemsand cable ducting systems for electricalinstallations. Part 2-1. Cable trunking systemsand cable ducting systems intended formounting on walls and ceilings

PEL/213

10/30218152 DCBS EN 50539-11 Low-voltage surge protectivedevices. Surge protective devices for specificapplication including D.C. Part 11.Requirements and tests for SPDs in photovoltaicapplications

PEL/37/1

10/30218180 DCBS EN 60904-5 Photovoltaic devices. Part 5.Determination of the equivalent celltemperature (ECT) of photovoltaic (PV) devicesby the open-circuit voltage method

GEL/82

10/30218198 DCBS EN 50132-5-3 Alarm systems. CCTVsurveillance systems for use in securityapplications. Part 5-3. Video transmission.Analogue and digital video transmission

GW/1/10

Comments for the above document are required by27 August, 2010

10/30218209 DCBS EN 61274-1-1 Fibre optic interconnectingdevices and passive components. Adaptors forfibre optic connectors. Part 1-1. Blank detailspecification

GEL/86/2


10/30218213 DCBS EN 61274-1 Fibre optic interconnectingdevices and passive components. Adaptors forfibre optic connectors. Part 1. Genericspecification

GEL/86/2


10/30215039 DCBS EN 690 Agricultural machinery. Manurespreaders. Safety

AGE/32


10/30215042 DCBS EN 997 WC pans and WC suites withintegral trap

B/503

10/30215045 DCBS EN 15287-1 AMD1 Chimneys. Design,installation and commissioning of chimneys.Part 1. Chimneys for non-roomsealed heatingappliances

B/506/1


10/30215057 DCBS EN 15194 AMD1 Cycles. Electrically powerassisted cycles. EPAC Bicycles

GME/25

10/30215342 DCBS EN ISO 5403-2 Leather. Determination ofwater resistance of flexible leather. Part 2.Repeated angular compression (Maeser)

TCI/69

10/30215969 DCBS EN 60127-7 Miniature fuses. Part 7.Miniature fuse-links for special applications

PEL/32

10/30216630 DCBS EN 12666-1 AMD1 Plastics piping systemsfor non-pressure underground drainage andsewerage. Polyethylene (PE). Part 1.Specifications for pipes, fittings and the system

PRI/88/1

10/30216645 DCBS EN 12226 Geosynthetics. General tests forevaluation following durability testing

B/553


10/30216724 DCBS EN 15210-2 Solid biofuels. Methods for thedetermination of mechanical durability ofpellets and briquettes. Briquettes

PTI/17


10/30216887 DCBS EN 60317-0-8 Specifications for particulartypes of winding wires. Part 0-8. Generalrequirements. Polyester glass fibre wound, resinor varnish impregnated or not impregnated,bare or enamelled rectangular copper wire

GEL/55



prEN ISO 1833-12Mixtures of acrylic, certain modacrylics, certainchlorofibres, certain elastanes and certain otherfibres (method using dimethylformamide)

prEN ISO 1833-13Mixtures of certain chlorofibres and certainother fibres (method using carbondisulfide/acetone)

prEN ISO 1833-14Mixtures of acetate and certain chlorofibres(method using acetic acid)

prEN ISO 1833-15Mixtures of jute and certain animal fibres(method by determining nitrogen content)

prEN ISO 1833-16Mixtures of polypropylene fibres and certainother fibres (method using xylene)

prEN ISO 1833-17Mixtures of chlorofibres (homopolymers of vinylchloride) and certain other fibres (method usingsulfuric acid)

prEN ISO 1833-18Mixtures of silk and wool or hair (method usingsulfuric acid)

prEN ISO 1833-19Mixtures of cellulose fibres and asbestos(method by heating)

prEN ISO 1833-20Mixtures of elastane and certain other fibres(method using dimethylacetamide)

prEN ISO 1833-21Mixtures of chlorofibres, certain modacrylics,certain elastanes, acetates, triacetates andcertain other fibres (method usingcyclohexanone)

The above standards have been issued underthe UAP procedure. Copies are available fromthe Programme Manager (below). Anycomments should be submitted no later than28 July, 2010.Contact: Eddie LevioEmail: [email protected]

TCI/80

prEN 4673-003Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys. Technicalspecification

Please note the above document has beenissued for Formal Vote. Copies of the draft areavailable on request from the contact point(below).Contact: Committee Service CentreEmail: [email protected]

ACE/12

DOCUMENTS NOT ISSUEDAS DPCs

Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000

ISO/DIS 12090-1Rolling bearings. Linear motion rollingbearings, profiled rail guides. Boundarydimensions and tolerances for series 1, 2 and 3

ISO/DIS 12090-2Rolling bearings. Linear motion rollingbearings, profiled rail guides. Boundarydimensions and tolerances for series 4 and 5

These standards have been circulated as DIS forthe second time. The drafts are available onrequest from the contact point (below).

Contact: Committee Service Centre

Email: [email protected]

MCE/7

prEN ISO 1833-1General principles of testing

prEN ISO 1833-2Ternary fibre mixtures

prEN ISO 1833-3Mixtures of acetate and certain other fibres(method using acetone)

prEN ISO 1833-4Mixtures of certain protein and certain otherfibres (method using hypochlorite)

prEN ISO 1833-5Mixtures of viscose, cupro or modal and cottonfibres (method using sodium zincate)

prEN ISO 1833-6Mixtures of viscose or certain types of cupro ormodal or lyocell and cotton fibres (methodusing formic acid and zinc chloride)

prEN ISO 1833-7Mixtures of polyamide and certain other fibres(method using formic acid)

prEN ISO 1833-8Mixtures of acetate and triacetate fibres(method using acetone)

prEN ISO 1833-9Mixtures of acetate and triacetate fibres(method using benzyl alcohol)

prEN ISO 1833-10Mixtures of triacetate or polylactide and certainother fibres (method using dichloromethane)

prEN ISO 1833-11Mixtures of cellulose and polyester fibres(method using sulfuric acid)

10/30218453 DCBS ISO/IEC 13066-1 Information technology.Interoperability with Assistive Technology (AT).Part 1. Requirements and recommendations forinteroperability

ICT/-/6

10/30218467 DCBS ISO/IEC 29155-1.3 Software and systemsengineering. Information technology projectperformance benchmarking framework. Part 1.Concepts and definitions

IST/15


10/30218470 DCBS EN 61056-1 General purpose lead-acidbatteries (valve regulated types). Part 1. Generalrequirements, functional characteristics.Methods of test

PEL/21


10/30218476 DCBS EN 61056-2 General purpose lead-acidbatteries (valve-regulated types). Part 2.Dimensions, terminals and marking

PEL/21


10/30218508 DCBS EN 1089-3 Transportable gas cylinders. Gascylinder identification (excluding LPG). Part 3.Colour coding

PVE/3/7

10/30218548 DCBS ISO 817 Refrigerants. Designation andsafety classification

RHE/18

10/30218859 DCBS EN ISO 21003-2 AMD1 Multilayer pipingsystems for hot and cold water installationsinside buildings. Part 2. Pipes

PRI/88/2

10/30218864 DCBS EN 140401-803 AMD1 Detail specification.Fixed low power film SMD resistors. Cylindrical.Stability classes 0,05. 0,1. 0, 25. 0,5. 1. 2

EPL/40X

10/30218867 DCBS EN 140401-802 AMD1 Detail specification.Fixed low power film SMD resistors.Rectangular. Stability classes 1; 2

EPL/40X

Draft British Standards for Public Comment continued...


To order visit


EN 1568-2:—Fire extinguishing media. Foam concentrates.Specification for high expansion foamconcentrates for surface application to water-immiscible liquids

CORRIGENDUM 1:March 2010

to EN 1568-2:2008FSH/18/3

EN 1568-3:—Fire extinguishing media. Foam concentrates.Specification for low expansion foamconcentrates for surface application to water-immiscible liquids


to EN 1568-3:2008FSH/18/3

EN 1568-4:—Fire extinguishing media. Foam concentrates.Specification for low expansion foamconcentrates for surface application to water-miscible liquids


to EN 1568-4:2008FSH/18/3

EN 1777:2010Hydraulic platforms (HPs) for fire fighting andrescue services. Safety requirements and testing

FSH/17/9

EN 1912:2004+A4:2010Structural timber. Strength classes. Assignmentof visual grades and species

B/518

EN 1998-2:—Eurocode 8. Design of structures for earthquakeresistance. Bridges

CORRIGENDUM 1:February 2010

to EN 1998-2:2005B/525/8

EN 1998-3:—Eurocode 8. Design of structures for earthquakeresistance. Assessment and retrofitting ofbuildings


to EN 1998-3:2005B/525/8

EN 2240-036:2010Aerospace series. Lamps, incandescent. Lamp,code 388. Product standard

ACE/6


ACE/6


ACE/6


ACE/6

EN 196-9:2010Methods of testing cement. Heat of hydration.Semiadiabatic method

B/516/12

EN 206-9:2010Concrete. Additional rules for Self-compactingConcrete (SCC)

B/517/1

EN 384:2010Structural timber. Determination ofcharacteristic values of mechanical propertiesand density

B/518

EN 534:2006+A1:2010Corrugated bitumen sheets. Productspecification and test methods

B/542/6

EN 806-4:2010Specifications for installations inside buildingsconveying water for human consumption.Installation

B/504/2

EN 1071-12:2010Advanced technical ceramics. Methods of testfor ceramic coatings. Reciprocating wear test

RPI/13

EN 1071-13:2010Advanced technical ceramics. Methods of testfor ceramic coatings. Determination of wearrate by the pin-on-disk method

RPI/13

EN 1097-2:2010Tests for mechanical and physical properties ofaggregates. Methods for the determination ofresistance to fragmentation

B/502

EN 1276:2009Chemical disinfectants and antiseptics.Quantitative suspension test for the evaluationof bactericidal activity of chemical disinfectantsand antiseptics used in food, industrial,domestic and institutional areas. Test methodand requirements (phase 2, step 1)

CH/216

EN 1367-2:2009Tests for thermal and weathering properties ofaggregates. Magnesium sulfate test

B/502/6

EN 1374:2000+A1:2010Agricultural machinery. Silos stationaryunloaders for round silos. Safety

AGE/6

EN 1568-1:—Fire extinguishing media. Foam concentrates.Specification for medium expansion foamconcentrates for surface application to water-immiscible liquids


to EN 1568-1:2008FSH/18/3

prEN 14516:2006/Amendment 1Baths for domestic purposes

prEN 14527:2006/Amendment 1Shower trays for domestic purposes

These documents are being circulated atCEN UAP stage. The drafts are available onrequest from the contact point (below).Contact: Committee Service CentreEmail: [email protected]

B/503

CEN/CENELEC UNIQUEACCEPTANCE PROCEDURE

Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000

prEN ISO 4063(ISO 4063:2009)Welding and allied processes. Nomenclature ofprocesses and reference numbers

This document, which will not be issued as aDraft for Public Comment, is identical to thecorrected version of ISO 4063:2009. It has beencirculated to CEN members for voting.Contact: Sarah MeagherEmail: [email protected]

WEE/1

CEN EUROPEANSTANDARDS

EUROPEAN RATIFIED TEXTS

The documents listed below have recentlybeen issued by CEN but have not yet beenpublished as BS ENs. BSI has an obligationto adopt all ENs and to withdraw anyconflicting British Standards (BSs) or partsof BSs. The following will beimplemented as BS ENs or as amendmentsto BS ENs shortly. Notification of theirimplementation will be given in theBS EN Publications section of the relevantedition of Update Standards.

EN 54-23:2010Fire detection and fire alarm systems. Fire alarmdevices. Visual alarm devices

FSH/12/5

EN 115-1:2008+A1:2010Safety of escalators and moving walks.Construction and installation

MHE/4

EN 196-8:2010Methods of testing cement. Heat of hydration.Solution method

B/516/12


EN 13042-5:2003+A1:2009Machines and plants for the manufacture,treatment and processing of hollow glass.Safety requirements. Presses

MCE/3/13

EN 13060:2004+A2:2010Small steam sterilizers

LBI/35

EN 13071-1:—Stationary waste containers up to 5000 l, toplifted and bottom emptied. Generalrequirements


to EN 13071-1:2008B/508/1

EN 13071-2:—Stationary waste containers up to 5000 l, toplifted and bottom emptied. Additionalrequirements for underground or partlyunderground systems


to EN 13071-2:2008B/508/1

EN 13128:—Safety of machine tools. Milling machines(including boring machines)


to EN 13128:2001+A2:2009MTE/1/1

EN 13128:2001+A2:2009Safety of machine tools. Milling machines(including boring machines)

MTE/1/1

EN 13523-8:2010Coil coated metals. Test methods. Resistance tosalt spray (fog)

STI/27

EN 13523-10:2010Coil coated metals. Test methods. Resistance tofluorescent UV radiation and watercondensation

STI/27

EN 13523-21:2010Coil coated metals. Test methods. Evaluation ofoutdoor exposed panels

STI/27

EN 13523-22:2010Coil coated metals. Test methods. Colourdifference. Visual comparison

STI/27

EN 13523-29:2010Coil coated metals. Test methods. Resistance toenvironmental soiling (dirt pick-up and striping)

STI/27

EN 13747:2005+A2:2010Precast concrete products. Floor plates for floorsystems

B/524

EN 4621:2010Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys. Technicalspecification

ACE/12

EN 4632-003:2010Aerospace series. Weldability and brazeabilityof materials in aerospace constructions.Welding and brazing of homogeneousassemblies of unalloyed and low alloy steels

ACE/61

EN 12254:2010Screens for laser working places. Safetyrequirements and testing

PH/2

EN 12371:2010Natural stone test methods. Determination offrost resistance

B/545

EN 12417:—Machine tools. Safety. Machining centres


to EN 12417:2001+A2:2009MTE/1/1

EN 12520:2010Furniture. Strength, durability and safety.Requirements for domestic seating

FW/0/2

EN 12525:2000+A2:2010Agricultural machinery. Front loaders. Safety

AGE/6

EN 12663-2:2010Railway applications. Structural requirements ofrailway vehicle bodies. Freight wagons

RAE/1/-/2

EN 12871:2010Wood-based panels. Performance specificationsand requirements for load bearing boards foruse in floors, walls and roofs

B/541

EN 13020:2004+A1:2010Road surface treatment machines. Safetyrequirements

B/513

EN 13023:2003+A1:2010Noise measurement methods for printing,paper converting, paper making machines andauxiliary equipment. Accuracy grades 2 and 3

MCE/3/9

EN 13035-9:2006+A1:2010Machines and plants for the manufacture,treatment and processing of flat glass. Safetyrequirements. Washing installations

MCE/3/13

EN 13035-11:2006+A1:2010Machines and plants for the manufacture,treatment and processing of flat glass. Safetyrequirements. Drilling machines

MCE/3/13


ACE/6


ACE/6


ACE/6


ACE/6

EN 2240-048:2010Aerospace series. Lamps, incandescent. Lamp,code 718 NPC. Product standard

ACE/6


ACE/6


ACE/6

EN 2241:2010Aerospace series. Lamp caps. Dimensions

ACE/6

EN 2852:2010Aerospace series. Nuts, hexagonal, plain,normal height, normal across flats, heatresisting steel passivated. Classification: 1100 MPa/650ºC

ACE/12

EN 2954-001:2010Aerospace series. Macrostructure of titaniumand titanium alloy wrought products. Generalrequirements

ACE/61/-/49

EN 3529:2010Aerospace series. Steel FE-PM2701(X2NiCoMo18-8-5). Vacuum induction meltedand vacuum arc remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. 1750 MPa ≤ Rm ≤ 2000 MPa

ACE/61/-/15

EN 4619:2010Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys. Installationand removal procedure

ACE/12

EN 4620:2010Aerospace series. Inserts, MJ threads, self-locking, with self broaching keys. Designstandard

ACE/12

CEN European Standards continued...


EN 55016-1-1:2010(IEC CISPR 16-1-1:2010)Specification for radio disturbance andimmunity measuring apparatus and methods.Radio disturbance and immunity measuringapparatus. Measuring apparatus

GEL/210/12

EN 60081:—(IEC 60081:1997/A4:2010)Double-capped fluorescent lamps. Performancespecifications

AMENDMENT 4:March 2010

to EN 60081:1998CPL/34/1

EN 60204-1:—(IEC 60204-1:2005)Safety of machinery. Electrical equipment ofmachines. General requirements


to EN 60204-1:2006MCE/3

EN 60204-11:—(IEC 60204-11:2000)Safety of machinery. Electrical equipment ofmachines. Requirements for HV equipment forvoltages above 1000 V A.C. or 1500 V D.C. andnot exceeding 36 Kv


to EN 60204-11:2000MCE/3

EN 60317-15:—(IEC 60317-15:2004/A1:2010)Specifications for particular types of windingwires. Polyesterimide enamelled roundaluminium wire, class 180


to EN 60317-15:2004GEL/55

EN 60317-42:—(IEC 60317-42:1997/A1:2010)Specifications for particular types of windingwires. Polyester-amide-imide enamelled roundcopper wire, class 200


to EN 60317-42:1997GEL/55

EN 60335-2-30:—(IEC 60335-2-30:2009)Household and similar electrical appliances.Safety. Particular requirements for room heaters


to EN 60335-2-30:2009CPL/61/07

EN 60335-2-89:2010(IEC 60335-2-89:2010)Household and similar electrical appliances.Safety. Particular requirements for commercialrefrigerating appliances with an incorporatedor remote refrigerant condensing unit orcompressor

CPL/61/3

CEN TECHNICALSPECIFICATIONS

CEN/TS 13036-2:2010Road and airfield surface characteristics. Testmethods. Assessment of the skid resistance of aroad pavement surface by the use of dynamicmeasuring systems

B/510/5

CEN/TS 15989:2010Firefighting vehicles and equipment. Symbolsfor operator controls and other displays

FSH/17

CENELEC PUBLICATIONS

EUROPEAN RATIFIED TEXTS

The documents listed below have recentlybeen issued by CENELEC but have not yetbeen published as BS ENs. BSI has anobligation to adopt all ENs and towithdraw any conflicting BritishStandards (BSs) or parts of BSs. Thefollowing will be implemented as BS ENsor as amendments to BS ENs shortly.Notification of their implementation willbe given in the BS EN Publications sectionof the relevant edition of UpdateStandards.

EN 50085-2-3:2010Cable trunking systems and cable ductingsystems for electrical installations. Particularrequirements for slotted cable trunking systemsintended for installation in cabinets

PEL/213

EN 50110-2:2010Operation of electrical installations. Nationalannexes

PEL/99

EN 50132-1:2010Alarm systems. CCTV surveillance systems foruse in security applications. Systemrequirements

GW/1/10

EN 50491-2:2010General requirements for Home and BuildingElectronic Systems (HBES) and BuildingAutomation and Control Systems (BACS).Environmental conditions

IST/6

EN 50495:2010Safety devices required for the safe functioningof equipment with respect to explosion risks

GEL/31

EN 50519:2010Assessment of workers’ exposure to electric andmagnetic fields of industrial induction heatingequipment

GEL/106

EN 13886:2005+A1:2010Food processing machinery. Cooking kettlesequipped with powered stirrer and/or mixer.Safety and hygiene requirements

MCE/3/5

EN 14351-1:2006+A1:2010Windows and doors. Product standard,performance characteristics. Windows andexternal pedestrian doorsets without resistanceto fire and/or smoke leakage characteristics

B/538

EN 14397-1:2010Fertilizers and liming materials. Determinationof carbon dioxide. Method for solid fertilizers

CII/37

EN 14492-1:—Cranes. Power driven winches and hoists. Powerdriven winch


to EN 14492-1:2006+A1:2009MHE/3

EN 14492-2:—Cranes. Power driven cranes and hoists. Powerdriven hoists


to EN 14492-2:2006+A1:2009MHE/3

EN 14655:2005+A1:2010Food processing machinery. Baguette slicers.Safety and hygiene requirements

MCE/3/5

EN 15434:2006+A1:2010Glass in building. Product standard forstructural and/or ultraviolet resistant sealant(for use with structural sealant glazing and/orinsulating glass units with exposed seals)

B/520/4

EN 15663:—Railway applications. Definition of vehiclereference masses


to EN 15663:2009RAE/1/-/2

EN 15705:2010Fertilizers. Determination of urea condensatesusing high performance liquid chromatography(HPLC). Isobutylidenediurea andcrotonylidenediurea (method A) and methylen-urea oligomers (method B)

CII/37

EN 15771:2010Vitreous and porcelain enamels. Determinationof surface scratch hardness according to theMohs scale

STI/36

CEN REPORTS

CEN/TR 15932:2010Plastics. Recommendation for terminology andcharacterisation of biopolymers and bioplastics

PRI/10

CEN European Standards continued...


EN 60950-1:—(IEC 60950-1:2005/A1:2009)Information technology equipment. Safety.General requirements


to EN 60950-1:2005EPL/108

EN 60964:2010(IEC 60964:2009)Nuclear power plants. Control rooms. Design

NCE/8

EN 60974-9:2010(IEC 60974-9:2010)Arc welding equipment Installation and use

WEE/6

EN 61000-4-4:—(IEC 61000-4-4:2004/A1:2010)Electromagnetic compatibility (EMC). Testingand measurement techniques. Electrical fasttransient/burst immunity test


to EN 61000-4-4:2004GEL/210/12

EN 61029-2-1:2010(IEC 61029-2-1:1993)Safety of transportable motor-operated electrictools. Particular requirements for circular sawbenches

CPL/116

EN 61029-2-8:2010(IEC 61029-2-8:1995)Safety of transportable motor-operated electrictools. Particular requirements for single spindlevertical moulders

CPL/116

EN 61029-2-10:2010(IEC 61029-2-10:1998)Safety of transportable motor-operated electrictools. Particular requirements for cutting-offgrinders

CPL/116

EN 61097-14:2010(IEC 61097-14:2010)Global maritime distress and safety system(GMDSS) AIS Search And Rescue Transmitter(AIS-SART). Operational and performancerequirements, methods of testing and requiredtest results

EPL/80

EN 61226:2010(IEC 61226:2009)Nuclear power plants. Instrumentation andcontrol important to safety. Classification ofinstrumentation and control functions

NCE/8

EN 60730-2-5:—(IEC 60730-2-5:2000/A2:2008)Automatic electrical controls for household andsimilar use. Particular requirements forautomatic electrical burner control systems


to EN 60730-2-5:2002CPL/72

EN 60730-2-15:2010(IEC 60730-2-15:2008)Automatic electrical controls for household andsimilar use. Particular requirements forautomatic electrical air flow, water flow andwater level sensing controls

CPL/72

EN 60745-2-2:2010(IEC 60745-2-2:2003/A1:2008)Hand-held motor-operated electric tools. Safety.Particular requirements for screwdrivers andimpact wrenches

CPL/116

EN 60745-2-6:2010(IEC 60745-2-6:2003/A2:2008)Hand-held motor-operated electric tools. Safety.Particular requirements for hammers

CPL/116

EN 60745-2-11:2010(IEC 60745-2-11:2003/A1:2008)Hand-held motor-operated electric tools. Safety.Particular requirements for reciprocating saws(jig and sabre saws)

CPL/116

EN 60832-1:2010(IEC 60832-1:2010)Live working. Insulating sticks and attachabledevices. Insulating sticks

PEL/78

EN 60832-2:2010(IEC 60832-2:2010)Live working. Insulating sticks and attachabledevices. Attachable devices

PEL/78

EN 60891:2010(IEC 60891:2009)Photovoltaic devices. Procedures fortemperature and irradiance corrections tomeasured I-V characteristics

GEL/82

EN 60904-10:2010(IEC 60904-10:2009)Photovoltaic devices. Methods of linearitymeasurement

GEL/82

EN 60909-3:2010(IEC 60909-3:2009)Short-circuit currents in three-phase A.C.systems. Currents during two separatesimultaneous line-to-earth short-circuits andpartial short-circuit currents flowing throughearth

PEL/73

EN 60601-1-2:—(IEC 60601-1-2:2007)Medical electrical equipment. Generalrequirements for basic safety and essentialperformance. Collateral standard.Electromagnetic compatibility. Requirementsand tests


to EN 60601-1-2:2007CH/62/1

EN 60601-1-3:—(IEC 60601-1-3:2008)Medical electrical equipment. Generalrequirements for basic safety and essentialperformance. Collateral standard. Radiationprotection in diagnostic x-ray equipment


to EN 60601-1-3:2008CH/62/2

EN 60601-1-6:—(IEC 60601-1-6:2006)Medical electrical equipment. Generalrequirements for basic safety and essentialperformance. Collateral standard. Usability


to EN 60601-1-6:2007CH/62/1

EN 60601-1-8:—(IEC 60601-1-8:2006)Medical electrical equipment. Generalrequirements for basic safety and essentialperformance. Collateral standard. Generalrequirements, test and guidance for alarmsystems in medical electrical equipment andmedical electrical systems


to EN 60601-1-8:2007CH/62/1

EN 60670-1:—(IEC 606070-1:2002)Boxes and enclosures for electrical accessoriesfor household and similar fixed electricalinstallations. General requirements


to EN 60670-1:2005PEL/23

EN 60691:—(IEC 60691:2002/A2:2010)Thermal-links. Requirements and applicationguide


to EN 60691:2003PEL/32

EN 60704-1:2010(IEC 60704-1:2010)Household and similar electrical appliances. Testcode for the determination of airborne noise.General requirements

CPL/59


CENELEC HD 60364-7-709:—(IEC 60364-7-709:2007)Low-voltage electrical installations.Requirements for special installations orlocations. Marinas and similar locations


to CENELEC HD 60364-7-709:2009JPEL/64

CENELEC HD 60364-7-717:2010(IEC 60364-7-717:2009)Low-voltage electrical installations.Requirements for special installations orlocations. Mobile or transportable units

JPEL/64

IEC PUBLICATIONS

It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.

The following IEC publications areavailable from BSI Customer Services (see’How to order’ on page 2)

IEC 60034-2-2:2010Rotating electrical machines. Specific methodsfor determining separate losses of largemachines from tests. Supplement to IEC 60034-2-1£72.99 members, £121.65 non-members

PEL/2

IEC 60034-18-1:2010(Edition 2)

Rotating electrical machines. Functionalevaluation of insulation systems. Generalguidelines£43.25 members, £72.09 non-members

PEL/2

IEC 60191-6-19:2010Mechanical standardization of semiconductordevices. Measurement methods of the packagewarpage at elevated temperature and themaximum permissible warpage£32.44 members, £54.07 non-members

EPL/47

IEC 60297-3-106:2010Mechanical structures for electronic equipment.Dimensions of mechanical structures of the 482,6 mm (19 in) series. Adaptation dimensions forsubracks and chassis applicable to metriccabinets or racks in accordance with IEC 60917-2-1£37.85 members, £63.08 non-members

EPL/48

IEC 60317-1:2010(Edition 4)

Specifications for particular types of windingwires. Polyvinyl acetal enamelled round copperwire, class 105£24.33 members, £40.55 non-members

GEL/55

EN 62439-4:2010(IEC 62439-4:2010)Industrial communication networks. Highavailability automation networks. Cross-network Redundancy Protocol (CRP)

AMT/7

EN 62439-5:2010(IEC 62439-5:2010)Industrial communication networks. Highavailability automation networks. BeaconRedundancy Protocol (BRP)

AMT/7

EN 62439-6:2010(IEC 62439-6:2010)Industrial communication networks. Highavailability automation networks. DistributedRedundancy Protocol (DRP)

AMT/7

EN 62563-1:2010(IEC 62563-1:2009)Medical electrical equipment. Medical imagedisplay systems. Evaluation methods

CH/62/2

CENELEC REPORTS

CLC/TR 50173-99-2:2010Information technology. Implementation of BCTapplications using cabling in accordance withEN 50173-4

TCT/7

CLC/TR 50417:2010Safety of household and similar electricalappliances. Interpretations related to EuropeanStandards in the EN 60335 series

CPL/61

CLC/TR 50485:2010Electromagnetic compatibility. Emissionmeasurements in fully anechoic chambers

GEL/210/12

CENELEC TECHNICALSPECIFICATIONS

CLC/TS 50539-12:2010Low-voltage surge protective devices. Surgeprotective devices for specific applicationincluding D.C. Selection and applicationprinciples. SPDs connected to photovoltaicinstallations

PEL/37/1

HARMONIZATIONDOCUMENTS

CENELEC HD 60364-4-43:2010Low-voltage electrical installations. Protectionfor safety. Protection against overcurrent£62.00 members, £124.00 non-members

JPEL/64

EN 61280-2-3:—(IEC 61280-2-3:2009)Fibre optic communication subsystem testprocedures. Digital systems. Jitter and wandermeasurements


to EN 61280-2-3:2009GEL/86/3

EN 61477:—(IEC 61477:2009)Live working. Minimum requirements for theutilization of tools, devices and equipment


to EN 61477:2009PEL/78

EN 61496-1:—(IEC 61496-1:2004)Safety of machinery. Electro-sensitive protectiveequipment. General requirements and tests


to EN 61496-1:2004MCE/3

EN 61978-1:2010(IEC 61978-1:2009)Fibre optic interconnecting devices and passivecomponents. Fibre optic passive chromaticdispersion compensators. Generic specification

GEL/86/2

EN 62061:—(IEC 62061:2005)Safety of machinery. Functional safety of safety-related electrical, electronic and programmableelectronic control systems


to EN 62061:2005MCE/3

EN 62115:—(IEC 62115:2003)Electric toys. Safety

INTERPRETATION SHEET 1:MARCH 2010

to EN 62115:2005CPL/61/21

EN 62439-1:2010(IEC 62439-1:2010)Industrial communication networks. Highavailability automation networks. Generalconcepts and calculation methods

AMT/7

EN 62439-2:2010(IEC 62439-2:2010)Industrial communication networks. Highavailability automation networks. MediaRedundancy Protocol (MRP)

AMT/7

EN 62439-3:2010(IEC 62439-3:2010)Industrial communication networks. Highavailability automation networks. ParallelRedundancy Protocol (PRP) and High availabilitySeamless Redundancy (HSR)

AMT/7

CENELEC Publications continued...


IEC 60601-2-43:2010(Edition 2)

Medical electrical equipment. Particularrequirements for the basic safety and essentialperformance of x-ray equipment forinterventional procedures£116.24 members, £193.74 non-members

CH/62/2

IEC 60603-7-41:2010Connectors for electronic equipment. Detailspecification for 8-way, unshielded, free andfixed connectors, for data transmissions withfrequencies up to 500 MHz£35.14 members, £58.57 non-members

EPL/48

IEC 60603-7-51:2010Connectors for electronic equipment. Detailspecification for 8-way, shielded, free and fixedconnectors, for data transmissions withfrequencies up to 500 MHz£35.14 members, £58.57 non-members

EPL/48

IEC 60730-1:2010(Edition 4)

Automatic electrical controls for household andsimilar use. General requirements£156.79 members, £261.32 non-members

CPL/72

IEC 60832-1:2010Live working. Insulating sticks and attachabledevices. Insulating sticks£100.02 members, £166.70 non-members

PEL/78

IEC 60832-2:2010Live working. Insulating sticks and attachabledevices. Attachable devices£129.76 members, £216.26 non-members

PEL/78

IEC 60917-2-4:2010Modular order for the development ofmechanical structures for electronic equipmentpractices. Sectional specification. Interface co-ordination dimensions for the 25mm equipmentpractice. Adaptation dimensions for subracks orchassis applicable in cabinets or racks inaccordance with IEC 60297-3-100 (19 in)£35.14 members, £58.57 non-members

EPL/48

IEC 61000-4-3:—Electromagnetic compatibility (EMC). Testingand measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test


to IEC 61000-4-3:2006£16.22 members, £27.03 non-members

GEL/210/12

IEC 61280-1-3:2010(Edition 2)

Fibre optic communication subsystem testprocedures. General communication subsystems.Central wavelength and spectral widthmeasurement£43.25 members, £72.09 non-members

GEL/86/3

IEC 60461:2010(Edition 4)

Time and control code£100.02 members, £166.70 non-members

EPL/100

IEC/TR 60493-2:2010Guide for the statistical analysis of ageing testdata. Validation of procedures for statisticalanalysis of censored normally distributed data£145.98 members, £243.30 non-members

GEL/112

IEC 60512-7-1:2010Connectors for electronic equipment. Tests andmeasurements. Impact tests (free connectors).Test 7a. Free fall (repeated)£18.92 members, £31.54 non-members

EPL/48

IEC 60512-9-1:2010Connectors for electronic equipment. Tests andmeasurements. Endurance tests. Test 9a.Mechanical operation£13.52 members, £22.53 non-members

EPL/48

IEC 60512-9-5:2010Connectors for electronic equipment. Tests andmeasurements. Endurance tests. Test 9e.Current loading, cyclic£13.52 members, £22.53 non-members

EPL/48

IEC 60512-19-1:2010Connectors for electronic equipment. Tests andmeasurements. Chemical resistance tests. Test19a. Fluid resistance of pre-insulated crimpbarrels£13.52 members, £22.53 non-members

EPL/48

IEC 60512-24-1:2010Connectors for electronic equipment. Tests andmeasurements. Magnetic interference tests. Test24a. Residual magnetism£10.81 members, £18.02 non-members

EPL/48

IEC 60601-2-23:2010(Edition 3)

Medical electrical equipment. Particularrequirements for the basic safety and essentialperformance of magnetic resonance equipmentfor medical diagnosis£140.57 members, £234.28 non-members

CH/62/4

IEC 60601-2-28:2010(Edition 2)

Medical electrical equipment. Particularrequirements for the basic safety and essentialperformance of x-ray tube assemblies formedical diagnosis£48.66 members, £81.10 non-members

CH/62/2

IEC 60317-8:2010(Edition 4)

Specifications for particular types of windingwires. Polyesterimide enamelled round copperwire, class 180£24.33 members, £40.55 non-members

GEL/55

IEC 60317-12:2010(Edition 3)

Specifications for particular types of windingwires. Polyvinyl acetal enamelled round copperwire, class 120£24.33 members, £40.55 non-members

GEL/55

IEC 60317-13:2010(Edition 3)

Specifications for particular types of windingwires. Polyester or polyesterimide overcoatedwith polyamide-imide enamelled round copperwire, class 200£24.33 members, £40.55 non-members

GEL/55

IEC 60317-17:2010(Edition 3)

Specifications for particular types of windingwires. Polyvinyl acetal enamelled rectangularcopper wire, class 105£24.33 members, £40.55 non-members

GEL/55

IEC 60317-25:2010(Edition 3)

Specifications for particular types of windingwires. Polyester or polyesterimide overcoatedwith polyamide-imide enamelled roundaluminium wire, class 200£24.33 members, £40.55 non-members

GEL/55

IEC 60317-43:—Specifications for particular types of windingwires. Aromatic polyimide tape wrapped roundcopper wire, class 240


to IEC 60317-43:1997£8.65 members, £14.42 non-members

GEL/55

IEC 60317-44:—Specifications for particular types of windingwires. Aromatic polyimide tape wrappedrectangular copper wire, class 240


to IEC 60317-44:1997£8.65 members, £14.42 non-members

GEL/55

IEC/TS 60349-3:2010(Edition 2)

Electrical traction. Rotating electrical machinesfor rail and road vehicles. Determination of thetotal losses of converter-fed alternating currentmotors by summation of the component losses£43.25 members, £72.09 non-members

GEL/9/2

IEC Publications continued...


ISO PUBLICATIONS

It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.

The following ISO publications areavailable from BSI Customer Services (see’How to order’ on page 2)

ISO 105-C06:2010(Edition 4)

Textiles. Tests for colour fastness. Colourfastness to domestic and commercial laundering£23.86 members, £39.76 non-members

TCI/81

Will be implemented as an identical British Standard

ISO 3580:2010(Edition 3)

Welding consumables. Covered electrodes formanual metal arc welding of creep-resistingsteels. Classification£38.32 members, £63.86 non-members

WEE/39

Will not be implemented as a British Standard

ISO 4000-1:2010(Edition 9)

Passenger car tyres and rims. Tyres (metricseries)£54.22 members, £90.36 non-members

AUE/4



Laboratory glassware. Volumetric instruments.Methods for testing of capacity and for use£38.32 members, £63.86 non-members

LBI/36/1


ISO 4802-1:2010(Edition 2)

Glassware. Hydrolytic resistance of the interiorsurfaces of glass containers. Determination bytitration method and classification£26.75 members, £44.58 non-members

CH/212


ISO 4802-2:2010(Edition 2)

Glassware. Hydrolytic resistance of the interiorsurfaces of glass containers. Determination byflame spectrometry and classification£28.91 members, £48.19 non-members

CH/212



Steel castings. Magnetic particle inspection£44.82 members, £74.70 non-members

ISE/111


IEC 62209-2:2010Human exposure to radio frequency fields fromhand-held and body-mounted wirelesscommunication devices. Human models,instrumentation, and procedures. Procedure todetermine the specific absorption rate (SAR) forwireless communication devices used in closeproximity to the human body (frequency rangeof 30 MHz to 6 GHz)£140.57 members, £234.28 non-members

GEL/106

IEC 62438:2010Radiation protection instrumentation. Mobileinstrumentation for the measurement ofphoton and neutron radiation in theenvironment£89.21 members, £148.68 non-members

NCE/2

IEC 62439-1:2010Industrial communication networks. Highavailability automation networks. Generalconcepts and calculation methods£116.24 members, £193.74 non-members

AMT/7

IEC 62439-3:2010Industrial communication networks. Highavailability automation networks. ParallelRedundancy Protocol (PRP) and High-availabilitySeamless Redundancy (HSR)£116.24 members, £193.74 non-members

AMT/7

IEC/TR 62630:2010Guidance for evaluating exposure from multipleelectromagnetic sources£100.02 members, £166.70 non-members

GEL/106

IEC/TR 62652:2010Effects of engaging and separating underelectrical load on connector interfaces incabling used to support IEEE 802.af (Power-over-Ethernet) applications£72.99 members, £121.65 non-members

EPL/48

IEC/PAS PUBLICATIONS

IEC/PAS 61076-2-109:2010Connectors for electronic equipment. Productrequirements. Circular connectors. Detailspecification for connectors M 12 x 1 withscrew-locking, for data transmissions withfrequencies up to 500 MHz£64.88 members, £108.13 non-members

EPL/48

IEC/PAS 61076-2-110:2010Connectors for electronic equipment. Productrequirements. Circular connectors. Detailspecification for circular connectors M 12 x 1with screw-locking, for high speed ethernet andhigh speed data communication withfrequencies up to 500 MHz and 10 gigabits/s£56.77 members, £94.62 non-members

EPL/48

IEC 61280-2-1:2010(Edition 2)

Fibre optic communication subsystem testprocedures. Digital systems. Receiver sensitivityand overload measurement£35.14 members, £58.57 non-members

GEL/86/3

IEC/TR 61292-4:2010(Edition 2)

Optical amplifiers. Maximum permissible opticalpower for the damage-free and safe use ofoptical amplifiers, including raman amplifiers£56.77 members, £94.62 non-members

GEL/86/3

IEC 61300-2-1:—Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures. Tests. Vibration (sinusoidal)

CORRIGENDUM 1:January 2010

to IEC 61300-2-1:2009GEL/86/2

IEC 61340-5-3:2010Electrostatics. Protection of electronic devicesfrom electrostatic phenomena. Properties andrequirements classification for packagingintended for electrostatic discharge sensitivedevices£48.66 members, £81.10 non-members

GEL/101

IEC 61760-3:2010Surface mounting technology. Standard methodfor the specification of components for throughhole reflow (THR) soldering£56.77 members, £94.62 non-members

EPL/501

IEC 61810-1:—Electromechanical elementary relays. Generalrequirements


to IEC 61810-1:2008EPL/94

IEC 61850-7-4:2010(Edition 2)

Communication networks and systems forpower utility automation. Basic communicationstructure. Compatible logical node classes anddata object classes£148.68 members, £247.80 non-members

PEL/57

IEC/TR 61850-90-1:2010Communication networks and systems forpower utility automation. Use of IEC 61850 forthe communication between substations£135.16 members, £225.27 non-members

PEL/57

IEC 62132-2:2010Integrated circuits. Measurement ofelectromagnetic immunity. Measurement ofradiated immunity. TEM cell and wideband TEMcell method£64.88 members, £108.13 non-members

EPL/47

IEC Publications continued...


ISO/IEC 11989:2010Information technology. iSCSI management API£91.09 members, £151.81 non-members

IST/6

Will not be implemented as a British Standard. Isapproved as suitable for use in the UK


Optics and photonics. Specification of rawoptical glass£31.09 members, £51.81 non-members

CPW/172/3


ISO/TR 12910:2010Light-frame timber construction. Comparison offour national design documents£54.22 members, £90.36 non-members

B/518


ISO 13229:2010Thermoplastics piping systems for non-pressureapplications. Unplasticized poly(vinyl chloride)(PVC-U) pipes and fittings. Determination of theviscosity number and K-value£18.07 members, £30.12 non-members

PRI/88/1


ISO/IEC 14496-5:—Information technology. Coding of audio-visualobjects. Reference software


to ISO/IEC 14496-5:2001£5.78 members, £9.64 non-members

IST/37


ISO/IEC 14496-20:—Information technology. Coding of audio-visualobjects. Lightweight Application SceneRepresentation (LASeR) and SimpleAggregation Format (SAF)


to ISO/IEC 14496-20:2008£5.78 members, £9.64 non-members

IST/37


ISO 15206:2010Timber poles. Basic requirements and testmethods£49.16 members, £81.93 non-members

B/518


ISO 16972:2010Respiratory protective devices. Terms,definitions, graphical symbols and units ofmeasurement£49.16 members, £81.93 non-members

PH/4


ISO 8536-2:2010(Edition 3)

Infusion equipment for medical use. Closuresfor infusion bottles£26.75 members, £44.58 non-members

CH/212


ISO 9241-210:2010Ergonomics of human-system interaction.Human-centred design for interactive systems£44.82 members, £74.70 non-members

PH/9



Gases and gas mixtures. Determination of firepotential and oxidizing ability for the selectionof cylinder valve outlets£40.48 members, £67.47 non-members

PVE/3/1



Anodizing of aluminium and its alloys.Instrumental determination of image clarity ofanodic oxidation coatings. Instrumental method£23.86 members, £39.76 non-members

STI/32


ISO 10545-6:2010(Edition 2)

Ceramic tiles. Determination of resistance todeep abrasion for unglazed tiles£15.91 members, £26.51 non-members

B/539



Geotextiles and geotextile-related products.Determination of water permeabilitycharacteristics normal to the plane, withoutload£33.25 members, £55.42 non-members

B/553


ISO 11161:—Safety of machinery. Integrated manufacturingsystems. Basic requirements


to ISO11161:2007£5.78 members, £9.64 non-members

MCE/3


ISO 11664-4:2008Colorimetry. CIE 1976 L*a*b* Colour space£20.96 members, £34.94 non-members

STI/14



Steel castings. Liquid penetrant inspection£44.82 members, £74.70 non-members

ISE/111


ISO 5794-1:2010(Edition 4)

Rubber compounding ingredients. Silica,precipitated, hydrated. Non-rubber tests£44.82 members, £74.70 non-members

PRI/23



Rubber, vulcanized or thermoplastic. Rubbersheets and rubber-coated fabrics.Determination of transmission rate of volatileliquids (gravimetric technique)£18.07 members, £30.12 non-members

PRI/22


ISO 6422-1:2010Layout key for trade documents. Paper-baseddocuments£18.07 members, £30.12 non-members

ICT/-/4


ISO 7967-5:2010(Edition 3)

Reciprocating internal combustion engines.Vocabulary of components and systems. Coolingsystems£35.42 members, £59.04 non-members

MCE/14/-/5


ISO 7967-9:2010(Edition 2)

Reciprocating internal combustion engines.Vocabulary of components and systems. Controland monitoring systems£28.91 members, £48.19 non-members

MCE/14


ISO 8124-3:2010(Edition 2)

Safety of toys. Migration of certain elements£38.32 members, £63.86 non-members

CW/15


ISO 8124-4:2010Safety of toys. Swings, slides and similar activitytoys for indoor and outdoor family domesticuse£57.11 members, £95.18 non-members

CW/15



ISO 29042-7:2010Safety of machinery. Evaluation of the emissionof airborne hazardous substances. Test benchmethod for the measurement of the pollutantconcentration parameter£18.07 members, £30.12 non-members

MCE/3


ISO/IEC TR 29107-1:2010Information technology. Intelligent homes.Taxonomy of specifications. Taxonomy method£44.82 members, £74.70 non-members

IST/6/-/12


ISO 29441:2010Water quality. Determination of total nitrogenafter UV digestion. Method using flow analysis(CFA and FIA) and spectrometric detection£31.09 members, £51.81 non-members

EH/3/2


ISO/IEC TR 29794-4:2010Information technology. Biometric samplequality. Finger image data£31.09 members, £51.81 non-members

IST/44


ISO/IEC TR 29794-5:2010Information technology. Biometric samplequality. Face image data£31.09 members, £51.81 non-members

IST/44


ISO/PAS PUBLICATIONS

ISO/PAS 3930:2009Instruments for measuring vehicle exhaustemissions. Metrological and technicalrequirements. Metrological control andperformance tests£51.32 members, £85.54 non-members

MCE/22

ISO/IEC 24739-3:2010Information technology. AT attachment withpacket interface-7. Serial transport protocolsand physical interconnect (ATA/ATAPI-7 V3)£96.14 members, £160.24 non-members

IST/6


ISO 25337:2010Plastics. Production quality control. Statisticalmethod for using single measurements£33.25 members, £55.42 non-members

PRI/21


ISO/TR 25743:2010Lifts (elevators). Study of the use of lifts forevacuation during an emergency£44.82 members, £74.70 non-members

MHE/4


ISO 27186:2010Active implantable medical devices. Four-poleconnector system for implantable cardiacrhythm management devices. Dimensional andtest requirements£69.40 members, £115.66 non-members

CH/150/6



Anaesthetic and respiratory equipment.Nebulizing systems and components£51.32 members, £85.54 non-members

CH/121/5


ISO 28640:2010Random variate generation methods£57.11 members, £95.18 non-members

SS/5


ISO 29042-5:2010Safety of machinery. Evaluation of the emissionof airborne hazardous substances. Test benchmethod for the measurement of the separationefficiency by mass of air cleaning systems withunducted outlet£18.07 members, £30.12 non-members

MCE/3


ISO 29042-6:2010Safety of machinery. Evaluation of the emissionof airborne hazardous substances. Test benchmethod for the measurement of the separationefficiency by mass of air cleaning systems withducted outlet£18.07 members, £30.12 non-members

MCE/3


ISO 17078-1:—Petroleum and natural gas industries. Drillingand production equipment. Side-pocketmandrels


to ISO 17078-1:2004£5.78 members, £9.64 non-members

PSE/17/-/4



Safety of machinery. Evaluation of the emissionof airborne hazardous substances. Test benchmethod for the measurement of the pollutantconcentration parameter£38.32 members, £63.86 non-members

EPL/278


ISO/IEC TR 19791:2010(Edition 2)

Information technology. Security techniques.Security assessment of operational systems£96.14 members, £160.24 non-members

IST/33


ISO 21809-5:2010Petroleum and natural gas industries. Externalcoatings for buried or submerged pipelinesused in pipeline transportation systems.External concrete coatings£42.65 members, £71.08 non-members

PSE/17/2


ISO/TS 22002-1:2009Prerequisite programmes on food safety. Foodmanufacturing£35.42 members, £59.04 non-members

AW/90


ISO 22840:2010Intelligent transport systems. Devices to aidreverse manoeuvres. Extended range backingaid systems (ERBA)£40.48 members, £67.47 non-members

EPL/278


ISO/TS 22939:2010Soil quality. Measurement of enzyme activitypatterns in soil samples using fluorogenicsubstrates in micro-well plates£28.91 members, £48.19 non-members

EH/4


ISO/IEC 24730-5:2010Information technology. Real-time locatingsystems (RTLS). Chirp spread spectrum (CSS) at2,4 GHz air interface£65.06 members, £108.43 non-members

IST/34


ISO Publications continued...


Help Us to Help

You!

Always quote your Customer Number

Don’t know your number?

Contact Customer Services

020 8996 9001

who will be happy to check it for you

Documents

British Standard List