15
Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. A M151108 EDR-6631A MVA-2000+ RAV 161211 Page 1 of 3 Maximum Ratings Pin Connections Voltage Variable Attenuator 50Ω 10 to 2000 MHz Broad Band Operating Temperature -55°C to 85°C Storage Temperature -55°C to 85°C Absolute Max. Supply Voltage(V+) 7V Absolute Max. Control Voltage(Vctrl) 14V Absolute Max. RF Input Level +19 dBm Notes: Rise/Fall time: 17µSec/10µSec Typ. Switching Time, turn on/off: 20µSec. Typ. Improved R.Loss in/out performance can be achieved at certain frequencies by choosing a V+ between +3V to +5V Equivalent Schematic MATCHING MATCHING V CONTROL V+ RF IN RF OUT Electrical Specifications (T AMB = 25 O C) Features Applications CASE STYLE: GP731 • Power level control • Feed forward amplifiers • CATV • Broadband, 10-2000 MHz • Low Insertion Loss, 1.9 dB typ. • IP3, +45 dBm Typ. • Small phase deviation over attenuation range • No external bias and RF matching network required • Shielded case • Aqueous washable FREQ. MIN. INSERTION MAX. ATTENUATION INPUT CONTROL IP3 RETURN POWER SUPPLY (MHz) LOSS, dB (+12V) dB (0V) POWER Voltage Current (dBm) LOSS Voltage Current (dBm) (V) (mA) (dB) (V) (mA) Min. Max. Typ. Max. Typ. Min. Max. Max. Typ. Typ. Max. 10 - 500 1.7 2.7 43 25 +19 0 - 12 15 43 23 +3 to +5 5 500 -1000 1.9 2.8 28 20 +19 0 - 12 15 48 23 +3 to +5 5 1000 -2000 2.1 3.0 23 15 +19 0 - 12 15 50 23 +3 to +5 5 MVA-2000+ MVA-2000+ TYPICAL ATTENUATION AT 1000MHz 0 5 10 15 20 25 30 0 2 4 6 8 10 12 CONTROL VOLTAGE (V) ATTENUATION (dB) V+=3V V+=5V RF IN 6 RF OUT 2 V CONTROL 4 V+ 8 GROUND 1,3,5,7 Permanent damage may occur if any of these limits are exceeded. Outline Drawing Demo Board MCL P/N: TB-286 Suggested PCB Layout (PL-154) inch mm Outline Dimensions ( ) A B C D E F G H J .350 .350 .100 .175 .075 .100 .110 .040 .080 8.89 8.89 2.54 4.45 1.93 2.54 2.79 1.02 2.03 K L M N P Q R wt. .050 .040 .195 .390 .120 .390 .070 grams 1.27 1.02 4.95 9.91 3.05 9.91 1.78 0.25 .045±.002 TRACE WIDTH, 4 PL. (SEE NOTE BELOW) .040 TYP. PACKAGE OUTLINE PIN 1 .110 .390 SQ. .100 TYP. .070 TYP. .140 TYP. 8X ø.020 PTH FOR GROUND NOTES: 1. TRACE WIDTH IS SHOWN FOR FR4 WITH DIELECTRIC THICKNESS .025” ± .002”; COPPER: 1/2 OZ. EACH SIDE. FOR OTHER MATERIALS TRACE WIDTH MAY NEED TO BE MODIFIED 2. BOTTOM SIDE OF THE PCB IS CONTINUOUS GROUND PLANE. DENOTES PCB COPPER LAYOUT WITH SMOBC (SOLDER MASK OVER BARE COPPER) DENOTES COPPER LAND PATTERN FREE OF SOLDER MASK Suggested Layout, Tolerance to be within .002 PCB Land Pattern Available Tape and Reel at no extra cost Reel Size Devices/Reel 7” 10, 20, 50, 100, 200 13” 500,1000 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications

Broad Band Voltage Variable Attenuator MVA-2000+

  • Upload
    others

  • View
    7

  • Download
    0

Embed Size (px)

Citation preview

MVA-2000+Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
REV. A M151108 EDR-6631A MVA-2000+ RAV 161211 Page 1 of 3
Maximum Ratings
Pin Connections
Broad Band
Operating Temperature -55°C to 85°C Storage Temperature -55°C to 85°C Absolute Max. Supply Voltage(V+) 7V Absolute Max. Control Voltage(Vctrl) 14V Absolute Max. RF Input Level +19 dBm
Notes:
Rise/Fall time: 17µSec/10µSec Typ. Switching Time, turn on/off: 20µSec. Typ. Improved R.Loss in/out performance can be achieved at certain frequencies by choosing a V+ between +3V to +5V
Equivalent Schematic
MATCHING MATCHING
V CONTROL
• Power level control • Feed forward amplifiers • CATV
• Broadband, 10-2000 MHz • Low Insertion Loss, 1.9 dB typ. • IP3, +45 dBm Typ. • Small phase deviation over attenuation range • No external bias and RF matching network required • Shielded case • Aqueous washable
FREQ. MIN. INSERTION MAX. ATTENUATION INPUT CONTROL IP3 RETURN POWER SUPPLY (MHz) LOSS, dB (+12V) dB (0V) POWER Voltage Current (dBm) LOSS Voltage Current
(dBm) (V) (mA) (dB) (V) (mA) Min. Max. Typ. Max. Typ. Min. Max. Max. Typ. Typ. Max.
10 - 500 1.7 2.7 43 25 +19 0 - 12 15 43 23 +3 to +5 5 500 -1000 1.9 2.8 28 20 +19 0 - 12 15 48 23 +3 to +5 5
1000 -2000 2.1 3.0 23 15 +19 0 - 12 15 50 23 +3 to +5 5
MVA-2000+
0
5
10
15
20
25
30
0 2 4 6 8 10 12 CONTROL VOLTAGE (V)
A TT
EN U
A TI
O N
(d B
V+=3V
V+=5V
RF IN 6 RF OUT 2 V CONTROL 4 V+ 8 GROUND 1,3,5,7
Permanent damage may occur if any of these limits are exceeded.
Outline Drawing
inch mmOutline Dimensions ( )
A B C D E F G H J .350 .350 .100 .175 .075 .100 .110 .040 .080 8.89 8.89 2.54 4.45 1.93 2.54 2.79 1.02 2.03
K L M N P Q R wt. .050 .040 .195 .390 .120 .390 .070 grams 1.27 1.02 4.95 9.91 3.05 9.91 1.78 0.25
.045±.002 TRACE WIDTH, 4 PL. (SEE NOTE BELOW)
.040 TYP.
PACKAGE OUTLINE
PIN 1
8X ø.020 PTH FOR GROUND
NOTES: 1. TRACE WIDTH IS SHOWN FOR FR4 WITH DIELECTRIC THICKNESS .025” ± .002”; COPPER: 1/2 OZ. EACH SIDE. FOR OTHER MATERIALS TRACE WIDTH MAY NEED TO BE MODIFIED 2. BOTTOM SIDE OF THE PCB IS CONTINUOUS GROUND PLANE.
DENOTES PCB COPPER LAYOUT WITH SMOBC (SOLDER MASK OVER BARE COPPER)
DENOTES COPPER LAND PATTERN FREE OF SOLDER MASK
Suggested Layout, Tolerance to be within .002
PCB Land Pattern
Available Tape and Reel
at no extra cost
Reel Size Devices/Reel 7” 10, 20, 50, 100, 200 13” 500,1000
+RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications
MVA-2000+
Performance Charts
Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
MVA-2000+ ATTENUATION Vs. FREQUENCY
0
10
20
30
40
50
60
FREQUENCY (MHz)
A TT
EN U
A TI
O N
(d B
OVER CONTROL VOLTAGES AT 1000MHz @ V+=3V
0
8
16
24
32
40
48
INPUT POWER (dBm)
0V 1V 2V 6V 12V
MVA-2000+ INPUT RETURN LOSS Vs. FREQUENCY OVER CONTROL VOLTAGES @ V+=3V
0
10
20
30
40
50
60
FREQUENCY (MHz)
R ET
U R
N L
O SS
(d B
MVA-2000+ ATTENUATION Vs. FREQUENCY
0
10
20
30
40
50
60
FREQUENCY (MHz)
A TT
EN U
A TI
O N
(d B
OVER CONTROL VOLTAGES AT 1000MHz @ V+=5V
0
8
16
24
32
40
48
INPUT POWER (dBm)
) 0V 1V 2V 6V 12V
MVA-2000+ INPUT RETURN LOSS Vs. FREQUENCY OVER CONTROL VOLTAGES @ V+=5V
0
10
20
30
40
50
60
FREQUENCY (MHz)
R ET
U R
N L
O SS
(d B
MVA-2000+Performance Charts
Page 3 of 3
Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
MVA-2000+ OUTPUT RETURN LOSS Vs. FREQUENCY
OVER CONTROL VOLTAGES @ V+=3V
0
10
20
30
40
50
FREQUENCY (MHz)
R ET
U R
N L
O SS
(d B
MVA-2000+ IP3 Vs. FREQUENCY
10
20
30
40
50
60
70
FREQUENCY (MHz)
IP 3
(d B
0
100
200
300
400
500
600
FREQUENCY (MHz)
PH A
SE S
H IF
T (D
MVA-2000+ OUTPUT RETURN LOSS Vs. FREQUENCY
OVER CONTROL VOLTAGES @ V+=5V
0
10
20
30
40
50
FREQUENCY (MHz)
R ET
U R
N L
O SS
(d B
MVA-2000+ IP3 Vs. FREQUENCY
10
20
30
40
50
60
70
FREQUENCY (MHz)
IP 3
(d B
0
100
200
300
400
500
600
FREQUENCY (MHz)
PH A
SE S
H IF
T (D
Voltage Variable Attenuator MVA-2000+ Typical Performance Data
(V)
0.0 24.26 27.25 1.0 15.89 18.93 2.0 8.35 11.05 3.0 5.73 8.38 4.0 4.17 6.82 5.0 3.23 5.67 6.0 2.63 4.71 7.0 2.41 3.82 8.0 2.26 3.02 9.0 2.14 2.46 10.0 2.05 2.08 11.0 1.98 1.96 12.0 1.91 1.89
FREQ.
(MHz)
10 55.55 58.51 16.78 19.71 5.57 8.03 2.51 4.33 1.73 1.72 20 52.61 55.69 16.70 19.66 5.55 8.04 2.49 4.33 1.71 1.71 50 47.86 50.94 16.62 19.63 5.54 8.08 2.49 4.35 1.72 1.71 100 43.17 46.23 16.59 19.58 5.54 8.07 2.47 4.38 1.71 1.71 150 40.01 43.10 16.51 19.56 5.51 8.09 2.48 4.39 1.72 1.71 200 37.72 40.76 16.52 19.54 5.54 8.09 2.49 4.39 1.73 1.73 300 34.39 37.49 16.45 19.49 5.55 8.12 2.51 4.43 1.74 1.73 400 31.97 35.07 16.38 19.43 5.58 8.18 2.53 4.48 1.77 1.77 500 30.11 33.19 16.32 19.37 5.59 8.20 2.55 4.51 1.80 1.79 600 28.55 31.65 16.25 19.27 5.62 8.22 2.56 4.53 1.83 1.82 700 27.24 30.33 16.15 19.20 5.65 8.27 2.58 4.58 1.86 1.84 800 26.08 29.17 16.04 19.12 5.66 8.32 2.60 4.63 1.88 1.86 900 25.05 28.13 15.92 18.99 5.68 8.36 2.60 4.68 1.90 1.88 1000 24.26 27.25 15.89 18.93 5.73 8.38 2.63 4.71 1.91 1.89 1100 23.47 26.43 15.83 18.82 5.77 8.41 2.65 4.75 1.93 1.92 1200 22.79 25.69 15.75 18.71 5.80 8.43 2.68 4.77 1.94 1.94 1300 22.12 24.99 15.65 18.59 5.82 8.48 2.70 4.81 1.96 1.97 1400 21.57 24.34 15.61 18.47 5.87 8.51 2.72 4.84 1.98 1.98 1500 21.03 23.74 15.54 18.36 5.93 8.55 2.75 4.89 2.01 2.01 1600 20.56 23.16 15.50 18.21 5.98 8.58 2.79 4.93 2.04 2.04 1700 20.01 22.58 15.36 18.04 6.00 8.63 2.81 4.99 2.07 2.06 1800 19.51 22.06 15.22 17.90 6.04 8.72 2.84 5.07 2.12 2.11 1900 19.02 21.54 15.06 17.77 6.08 8.82 2.85 5.17 2.16 2.13 2000 18.63 21.04 14.98 17.62 6.13 8.88 2.88 5.24 2.18 2.16 2100 18.22 20.58 14.88 17.49 6.18 8.98 2.90 5.34 2.20 2.20 2200 17.88 20.12 14.81 17.34 6.24 9.05 2.94 5.41 2.25 2.24 2300 17.49 19.66 14.73 17.24 6.31 9.18 2.96 5.53 2.27 2.27 2400 17.15 19.23 14.65 17.11 6.38 9.29 3.01 5.64 2.32 2.32 2500 16.86 18.83 14.63 16.98 6.49 9.44 3.05 5.78 2.38 2.37
V CONTROL
ATTENUATION Vs. V CONTROL Vs. V+
@V Control=0V @V Control=1V @V Control=3V @V Control=6V @V Control=12V
(dB)
@V+=3V @V+=5V @V+=3V @V+=5V@V+=5V @V+=3V @V+=5V @V+=3V
REV. X1 MVA-2000+
Voltage Variable Attenuator MVA-2000+ Typical Performance Data
FREQ.
(MHz)
10 7.65 13.99 10.57 18.81 20.87 21.12 20.96 21.42 28.61 28.66 20 7.84 14.54 10.86 19.95 21.85 20.99 21.63 21.48 33.00 33.05 50 8.04 15.04 11.15 20.96 22.69 20.62 22.05 21.26 36.98 37.11 100 8.16 15.38 11.33 21.72 23.26 20.26 22.24 21.00 37.51 37.78 150 8.24 15.56 11.45 22.12 23.64 20.03 22.41 20.81 36.54 36.69 200 8.29 15.70 11.53 22.46 23.80 19.85 22.37 20.70 34.44 34.59 300 8.42 15.99 11.73 23.09 24.23 19.50 22.36 20.39 31.99 31.98 400 8.54 16.24 11.92 23.65 24.60 19.16 22.27 20.10 29.94 29.86 500 8.68 16.51 12.12 24.26 25.03 18.81 22.24 19.78 28.64 28.68 600 8.85 16.80 12.36 24.96 25.65 18.43 22.37 19.44 28.05 28.06 700 8.99 17.09 12.57 25.61 26.15 18.12 22.37 19.20 27.56 27.59 800 9.14 17.41 12.81 26.48 26.84 17.84 22.49 18.99 27.42 27.39 900 9.29 17.71 13.02 27.28 27.65 17.56 22.71 18.73 27.54 27.49 1000 9.41 17.96 13.23 28.08 28.48 17.37 23.00 18.64 28.13 27.97 1100 9.55 18.20 13.45 28.96 29.40 17.23 23.23 18.52 28.50 28.26 1200 9.67 18.39 13.62 29.70 30.34 17.09 23.51 18.44 29.07 28.79 1300 9.77 18.54 13.77 30.31 31.14 17.03 23.73 18.44 29.93 29.61 1400 9.86 18.61 13.92 30.80 31.63 17.01 23.74 18.44 30.41 30.13 1500 9.97 18.69 14.08 31.25 32.33 16.91 23.84 18.39 30.60 30.30 1600 10.05 18.69 14.17 31.25 32.52 16.94 23.90 18.46 31.46 31.16 1700 10.15 18.69 14.29 31.23 32.45 16.93 23.57 18.52 31.25 30.82 1800 10.26 18.69 14.44 31.00 33.09 16.85 23.55 18.46 30.58 30.24 1900 10.37 18.73 14.61 30.50 33.43 16.78 23.40 18.43 30.58 30.23 2000 10.49 18.74 14.80 29.97 33.80 16.66 23.09 18.40 30.08 29.84 2100 10.66 18.80 15.07 29.27 34.80 16.47 22.89 18.28 29.29 29.02 2200 10.86 18.88 15.37 28.42 36.05 16.26 22.77 18.12 29.01 28.78 2300 11.06 18.98 15.67 27.61 37.54 16.04 22.71 17.96 29.07 28.70 2400 11.34 19.20 16.14 26.68 40.57 15.74 22.65 17.75 29.01 28.64 2500 11.62 19.39 16.60 25.69 45.15 15.45 22.64 17.52 29.05 28.5
@V+=5V @V+=3V @V+=5V@V+=5V @V+=3V @V+=5V @V+=3V@V+=3V @V+=5V
INPUT RETURN LOSS Vs. V CONTROL Vs. V+
@V Control=0V @V Control=1V @V Control=3V @V Control=6V @V Control=12V
(dB)
Voltage Variable Attenuator MVA-2000+ Typical Performance Data
FREQ.
(MHz)
10 8.42 16.05 14.39 27.51 17.40 23.45 20.81 23.95 28.47 28.51 20 8.65 16.88 14.78 30.82 17.93 23.59 21.47 24.35 32.85 32.86 50 8.86 17.56 15.18 32.82 18.38 23.24 21.88 24.26 36.75 36.76 100 8.99 17.97 15.39 32.75 18.62 22.88 22.02 24.03 36.93 37.08 150 9.05 18.17 15.53 32.37 18.81 22.68 22.12 23.84 35.57 35.61 200 9.12 18.38 15.65 31.51 18.93 22.36 22.13 23.51 33.79 33.93 300 9.24 18.68 15.91 30.15 19.24 21.89 22.22 23.02 31.27 31.19 400 9.40 19.04 16.22 28.66 19.60 21.36 22.22 22.42 29.13 29.10 500 9.56 19.36 16.52 27.45 19.92 20.87 22.25 21.88 27.75 27.74 600 9.71 19.71 16.88 26.48 20.34 20.42 22.43 21.48 27.24 27.19 700 9.89 20.18 17.27 25.41 20.86 19.91 22.68 20.99 26.73 26.68 800 10.05 20.56 17.61 24.58 21.27 19.50 22.78 20.65 26.29 26.20 900 10.19 20.91 17.95 23.97 21.74 19.19 23.03 20.40 26.35 26.23 1000 10.35 21.38 18.27 23.28 22.24 18.86 23.48 20.14 26.75 26.54 1100 10.45 21.57 18.51 22.89 22.56 18.65 23.59 20.04 26.70 26.49 1200 10.51 21.73 18.64 22.57 22.75 18.49 23.73 20.00 27.14 26.90 1300 10.61 21.98 18.82 22.15 23.10 18.32 24.11 19.92 27.86 27.59 1400 10.74 22.32 19.10 21.61 23.56 18.01 24.47 19.68 28.08 27.85 1500 10.79 22.23 19.17 21.48 23.60 17.97 24.35 19.74 28.22 27.92 1600 10.79 22.19 19.04 21.21 23.50 17.89 24.49 19.82 29.34 29.12 1700 10.97 22.64 19.49 20.62 24.28 17.52 25.05 19.42 29.12 28.72 1800 11.03 22.42 19.59 20.56 24.28 17.48 24.57 19.40 28.35 28.08 1900 11.11 22.52 19.70 20.24 24.55 17.32 24.88 19.33 28.85 28.45 2000 11.33 23.23 20.26 19.50 25.58 16.84 25.71 18.82 28.73 28.51 2100 11.54 23.54 20.82 19.07 26.59 16.51 26.01 18.42 27.87 27.56 2200 11.77 24.34 21.27 18.41 27.67 16.05 27.00 18.02 27.93 27.69 2300 11.93 25.02 21.57 17.85 28.53 15.66 28.17 17.68 28.17 27.70 2400 12.31 27.13 22.18 16.89 30.20 14.94 31.05 16.93 27.52 26.93 2500 12.65 28.95 22.58 16.20 30.88 14.45 34.10 16.37 26.71 25.90
@V+=3V @V+=5V
OUTPUT RETURN LOSS Vs. V CONTROL Vs. V+
@V Control=0V @V Control=2V @V Control=3V @V Control=6V @V Control=12V
(dB)
@V+=3V @V+=5V @V+=3V @V+=5V@V+=5V @V+=3V @V+=5V @V+=3V
REV. X1 MVA-2000+
Voltage Variable Attenuator MVA-2000+ Typical Performance Data
FREQ.
(MHz)
10 18.77 19.08 32.03 31.42 41.30 31.87 47.28 48.41 20 22.75 24.58 36.37 36.28 45.18 36.44 49.32 51.19 30 26.51 28.99 38.98 39.35 47.78 39.15 51.79 52.14 40 29.62 31.85 40.92 41.31 49.66 40.93 54.11 53.56 50 33.23 33.86 42.60 42.98 51.27 42.43 55.45 55.56 60 33.93 35.47 43.69 43.81 52.08 43.42 55.34 56.00 80 35.75 36.52 45.53 46.04 52.26 45.18 54.13 54.54 100 36.33 36.10 47.36 47.76 49.30 46.51 51.12 50.91 200 36.63 38.12 53.42 50.45 50.44 47.68 52.29 53.43 300 37.97 39.64 55.33 50.43 52.26 48.30 55.71 57.09 400 38.03 39.84 53.83 50.37 55.63 48.20 58.54 57.23 500 39.04 40.80 51.90 51.95 53.78 49.35 56.23 54.73 600 39.83 40.98 50.29 51.77 51.62 49.71 55.24 54.06 700 40.59 41.69 49.84 52.03 49.99 50.99 52.97 52.64 800 40.26 41.71 49.24 52.67 49.70 53.30 51.58 51.75 900 41.61 42.19 49.19 53.97 48.99 53.98 50.97 50.86 1000 41.85 42.56 50.43 56.61 49.97 55.32 52.63 52.64 1100 41.38 42.36 52.19 57.08 50.49 54.92 54.51 54.91 1200 41.64 42.67 54.87 55.73 52.06 53.71 57.28 57.33 1300 42.92 43.12 52.94 55.83 50.72 54.94 56.33 56.20 1400 42.28 42.85 57.17 52.53 53.02 51.56 56.78 55.97 1500 43.04 43.81 56.03 54.70 51.95 53.03 56.79 57.68 1600 43.84 44.30 55.64 55.35 51.29 53.50 55.53 57.59 1700 43.26 43.25 53.10 52.11 50.48 52.40 52.18 52.18 1800 43.96 43.86 53.79 52.05 50.20 53.47 52.06 53.04 1900 44.12 44.28 54.28 53.25 48.53 54.31 51.86 52.69 2000 44.30 45.04 55.00 55.44 49.43 54.72 52.67 53.12 2100 44.29 45.01 55.30 55.39 49.56 55.43 53.47 53.47 2200 45.08 45.68 55.19 54.13 49.70 55.48 54.41 54.88 2300 45.49 46.21 54.82 53.51 50.33 54.32 54.65 53.92 2400 45.64 45.96 55.35 54.24 50.78 55.55 54.82 53.87 2500 45.27 45.99 55.44 53.65 50.73 54.15 54.78 53.85
@V+=3V @V+=5V@V+=5V @V+=3V @V+=5V @V+=3V
(dBm)
@V+=3V @V+=5V
@V Control=0V @V Control=3V @V Control=6V @V Control=12V
REV. X1 MVA-2000+
Voltage Variable Attenuator MVA-2000+ Typical Performance Data
FREQ.
(MHz)
10 126.64 128.23 178.45 179.07 179.16 179.48 179.06 179.30 178.98 179.04 20 127.53 129.13 180.23 180.74 181.31 181.55 181.32 181.60 181.36 181.28 50 120.70 120.04 183.74 183.90 185.46 185.63 185.56 185.87 185.65 185.62 100 117.61 117.56 189.12 188.93 191.75 191.80 192.01 192.15 192.12 192.12 150 119.68 118.78 194.07 193.58 197.86 197.75 198.14 198.30 198.32 198.28 200 123.13 122.28 199.07 198.28 203.95 203.72 204.31 204.44 204.53 204.51 300 132.51 130.91 209.07 207.81 215.97 215.58 216.49 216.55 216.78 216.78 400 143.12 140.57 219.14 217.10 228.02 227.39 228.63 228.70 228.98 229.00 500 154.00 150.86 229.17 226.65 239.96 239.05 240.74 240.67 241.14 241.17 600 165.21 161.53 239.36 236.26 251.92 250.80 252.94 252.76 253.34 253.39 700 176.36 172.06 249.34 245.84 263.80 262.54 264.92 264.86 265.45 265.50 800 188.05 182.94 259.55 255.37 275.76 274.20 277.04 276.82 277.61 277.65 900 199.78 193.93 270.04 265.22 287.77 285.85 289.13 288.81 289.65 289.71 1000 211.79 205.01 280.62 274.92 299.79 297.43 301.30 300.70 301.83 301.99 1100 223.31 215.97 290.77 284.74 311.68 309.11 313.41 312.66 314.00 314.16 1200 235.15 227.04 301.26 294.53 323.65 320.76 325.55 324.61 326.20 326.38 1300 246.88 238.16 311.78 304.40 335.67 332.43 337.76 336.71 338.41 338.56 1400 258.82 249.17 322.55 314.44 347.71 343.90 349.99 348.50 350.61 350.75 1500 270.86 260.33 333.40 324.49 359.72 355.46 362.22 360.44 362.88 363.00 1600 282.51 271.48 343.83 334.41 371.75 367.13 374.44 372.39 375.12 375.22 1700 294.43 282.60 354.60 344.57 383.73 378.92 386.56 384.48 387.29 387.44 1800 305.96 293.75 365.37 354.89 395.65 390.66 398.79 396.58 399.50 399.72 1900 318.32 304.97 376.52 365.04 407.83 402.27 410.89 408.57 411.72 411.95 2000 330.21 316.27 387.50 375.41 419.81 413.89 423.17 420.49 423.95 424.17 2100 342.36 327.53 398.79 385.95 431.98 425.40 435.55 432.40 436.21 436.53 2200 354.54 338.91 409.95 396.20 444.10 436.92 447.81 444.31 448.49 448.84 2300 367.19 350.44 421.69 406.70 456.35 448.25 460.16 455.96 460.70 461.05 2400 379.27 361.69 432.74 417.29 468.46 459.85 472.54 467.94 473.05 473.41 2500 391.91 373.31 444.61 427.59 480.68 470.95 484.94 479.40 485.32 485.70
@V+=3V @V+=5V
PHASE SHIFT Vs. V CONTROL Vs. V+
@V Control=0V @V Control=1V @V Control=3V @V Control=6V @V Control=12V
(deg)
@V+=3V @V+=5V @V+=3V @V+=5V@V+=5V @V+=3V @V+=5V @V+=3V
REV. X1 MVA-2000+
Voltage Variable Attenuator MVA-2000+ Typical Performance Curves
Attenuation @ 1000 MHz 0
5
10
15
20
25
30
35
40
45
50 0 1 2 3 4 5 6 7 8 9 10 11 12
V Control (V)
10
20
30
40
50
60
70
80
90
100 0 250 500 750 1000 1250 1500 1750 2000 2250 2500
Frequency (MHz)
A tte
nu at
io n
(d B
10
20
30
40
50
60
70
80
90
100 0 250 500 750 1000 1250 1500 1750 2000 2250 2500
Frequency (MHz)
A tte
nu at
io n
(d B
Input Return Loss @ V+=3 V 0
10
20
30
40
50
60
70
80
90
100 0 250 500 750 1000 1250 1500 1750 2000 2250 2500
Frequency (MHz)
R et
ur n
Lo ss
(d B
Input Return Loss @ V+=5 V 0
10
20
30
40
50
60
70
80
90
100 0 250 500 750 1000 1250 1500 1750 2000 2250 2500
Frequency (MHz)
R et
ur n
Lo ss
(d B
)
@ V Control=0 V @ V Control=1 V @ V Control=3 V @ V Control=6 V @ V Control=12 V
Output Return Loss @ V+=3 V 0
10
20
30
40
50
60
70
80
90
100 0 250 500 750 1000 1250 1500 1750 2000 2250 2500
Frequency (MHz)
R et
ur n
Lo ss
(d B
Output Return Loss @ V+=5 V 0
10
20
30
40
50
60
70
80
90
100 0 250 500 750 1000 1250 1500 1750 2000 2250 2500
Frequency (MHz)
R et
ur n
Lo ss
(d B
)
@ V Control=0 V @ V Control=2 V @ V Control=3 V @ V Control=6 V @ V Control=12 V
REV. X1 MVA-2000+
Voltage Variable Attenuator MVA-2000+ Typical Performance Curves
Input IP3 @ V+=3 V
10
20
30
40
50
60
70
80
90
100
110
0 250 500 750 1000 1250 1500 1750 2000 2250 2500
Frequency (MHz)
In pu
10
20
30
40
50
60
70
80
90
100
110
0 250 500 750 1000 1250 1500 1750 2000 2250 2500
Frequency (MHz)
In pu
50
100
150
200
250
300
350
400
450
500
550
0 250 500 750 1000 1250 1500 1750 2000 2250 2500
Frequency (MHz)
P ha
se S
hi ft
(d eg
Phase Shift @ V+=5 V
50
100
150
200
250
300
350
400
450
500
550
0 250 500 750 1000 1250 1500 1750 2000 2250 2500
Frequency (MHz)
P ha
se s
hi ft
(d eg
)
@ V Control=0 V @ V Control=1 V @ V Control=3 V @ V Control=6 V @ V Control=12 V
REV. X1 MVA-2000+
070704 Page 2 of 2
GP731 Rev.: G (1/APR/21) ECO-004952 File: GP731 Sheet 1 of 1 This document and its contents are the property of Mini-Circuits.
Case Style GP
CASE # A B C D E F G H J K L M
GP731 .350
(8.89) .350
(8.89) .100
(2.54) .175
(4.45) .075
(1.91) .100
(2.54) .110
(2.79) .040
(1.02) .080
(2.03) .050
(1.27) .040
(1.02) .195
GP731 .390
(9.91) .120
(3.05) .390
(9.91) .070
(1.78) .4
+0.3 -0.0
Dimensions are in inches (mm). Tolerances: 2 Pl. + .03; 3Pl. ± .015 Notes: 1. Case material: Nickel-Silver alloy. 2. Base: Printed wiring laminate. 3. Termination finish:
For RoHS Case Styles: 3-5 µ inch (.08-.13 microns) Gold over 120-240 µ inch (3.05-6.10 microns) Nickel plate. For RoHS-5 Case Styles: Tin-Lead plate.
Outline Dimensions GP731
98-TR-F78 Rev.: D (01/17/18) M164706 File: 98-TR-F78.docx Sheet 1 of 1 This document and its contents are the property of Mini-Circuits.
Tape & Reel Packaging TR-F78
and transportation. Tapes are static dissipative and comply with industry standards EIA-481/EIA-541.
Go to: www.minicircuits.com/pages/pdfs/tape.pdf
13 200
500, 1000
Note: Please consult individual model data sheet to determine device per reel availability.
Mini-Circuits Environmental Specifications
All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test.
Specification Test/Inspection Condition Reference/Spec
Individual Model Data Sheet
Individual Model Data Sheet
HAST 130°C, 85% RH, 96 hours JESD22-A110
Humidity 90 to 95% RH, 240 hours, 50°C MIL-STD-202, Method 103, Condition A, Except 50°C and end-point electrical test done within 12 hours
Thermal Shock -55° to 100°C, 100 cycles MIL-STD-202, Method 107, Condition A-3, except +100°C
Solder Reflow Heat Sn-Pb Eutectic Process: 225°C peak Pb-Free Process, 245°C peak
J-STD-020, Table 4-1, 4-2 and 5-2, Figure 5-1
Solderability 10X Magnification J-STD-002, Para 4.2.5, Test S, 95% Coverage
Vibration (High Frequency) 20g peak, 20-2000 Hz, 4 times in each of three axes (total 12) MIL-STD-883, Method 2007.3, Condition A
Mechanical Shock 50g, 11 ms, 1/2-sine, 18 shocks: 3 each direction, each of 3 axes
MIL-STD-202, Method 213, Condition A
Marking Resistance to Solvents Isopropyl alcohol + mineral spirits at 25°C; terpene defluxer at 25°C; distilled water + proylene glycol monomethyl ether + monoethanolamine at 63°C to 70°C
MIL-STD-202, Method 215
This document and its contents are the property of Mini-Circuits.
Rev:ENV03T3 A 02/28/11 File:M130240 ENV03T3.pdf
Page: 1