BROCHURE - PRB · PRB - GENERAL BROCHURE 2 PRB near you PRB a sales force of over 125 people 2 PRB POITIERS ZAE de St Eloi 15 rue Edouard-Branly 86000 POITIERS Tel.: +33 (0)5.49.46.26.36

Tiler Facade specialist & PW/Carcass

Painter & flooring specialist

E.W.I.

www.prb.fr

GENERALBROCHURE

2PRB - GENERAL BROCHURE www.prb.fr

PRB near you

PRB a sales forceof over 125 people

2 PRB POITIERSZAE de St Eloi 15 rue Edouard-Branly86000 POITIERSTel.: +33 (0)5.49.46.26.36Fax: +33 (0)5.49.01.97.79

3 PRB RENNES8 rue du Comte de DionBâtiment BZAC de La Touche Tizon35230 NOYAL-CHATILLON-SUR-SEICHE Tel.: +33 (0)2 99 53 02 78Fax : +33 (0)2 99 53 79 70

4 PRB QUIMPERZA du Petit Guélen1 chemin de Kérarnou29000 QUIMPERTel.: +33 (0)2.98.52.80.38Fax: +33 (0)2.98.52.80.87

5 PRB TOURSZ.A.C. du Papillon37210 PARCAY-MESLAYTel.: +33 (0)2.47.40.21.00Fax: +33 (0)2.47.29.08.19

6 PRB CAENRue Henri SprietZI Georges Claude14120 MONDEVILLETel.: +33 (0)2 31 35 03 14 Fax: +33 (0)2 31 82 14 54

7 PRB ORLEANS22 bis, rue des Marchais45140 ST JEAN-DE-LA-RUELLETel.: +33 (0)2.38.55.34.25Fax: +33 (0)2.38.72.28.71

8 PRB PARIS SUDZ.A.C. du Fond des Prés91460 MARCOUSSISTel.: +33 (0)1.69.01.66.80Fax: +33 (0)1.69.80.62.50

9 PRB PARIS NORD34, rue Gay-Lussac – Z.I. Compans77290 MITRY-MORYTel.: +33 (0)1.60.03.32.45 Fax: +33 (0)1.64.44.50.80

10 PRB NORD42 rue des MarlettesZ.A. du Blanc Terroir62490 QUIERY-LA MOTTETel.: +33 (0)3.21.15.14.68 Fax: +33 (0)3.21.21.09.99

11 PRB NANCYMarché de gros36, rue Jean Mermoz54500 VANDOEUVRE-LES-NANCYTel.: +33 (0)3 83 54 62 21 Fax: +33 (0)3 83 57 23 82

12 PRB DIJONRue de la Pièce Léger21160 MARSANNAY-LA-COTETel.: +33 (0)3.80.63.81.29 Fax: +33 (0)3.80.56.69.62

13 PRB AUVERGNETransports CASSIERZ.I. du Brezet 20-22 rue des Frères Lumières63000 CLERMONT-FERRANDTel.: +33 (0)4.73.92.55.36Fax: +33 (0)4.73.90.89.13

14 PRB LYON3, chemin de Mûre – Z.I. de l’Aigue69780 ST PIERRE-DE-CHANDIEUTel.: +33 (0)4.78.40.21.72 Fax: +33 (0)4.78.40.22.42

15 PRB AVIGNON133 rue Thomas-EdisonZI du Fournalet – 84700 SORGUESTel.: +33 (0)4.90.02.21.00Fax: +33 (0)4.90.02.11.05

16 PRB LE CANNETLe Théron83340 LE CANNET-DES-MAURESTel.: +33 (0)4.94.60.74.00Fax: +33 (0)4.94.60.79.28

17 PRB MARSEILLES56, rue Ampère – Z.I. Canourgues13340 ROGNACTel.: +33 (0)4.42.78.73.11Fax: +3 (0)4.42.78.75.70

18 PRB VENDARGUES675, avenue de Bigos34740 VENDARGUESTel.: +33 (0)4.67.03.11.62Fax: +33 (0)4.67.03.15.19

19 PRB RIVESALTESZone Artisanale de Rivesaltes5001, Panisso Est66600 RIVESALTESTel.: +33 (0)4.68.68.94.70Fax: +33 (0)4.68.81.15.80

20 PRB TOULOUSE3 avenue de Pradié31120 PORTET-SUR-GARONNETel.: +33 (0)5.61.40.72.62Fax: +33 (0)5.61.44.59.77

21 PRB PAURue Mondeils – ZA 64230 DENGUINTel.: +33 (0)5.59.62.06.16Fax: +33 (0)5.59.61.82.58

22 PRB BORDEAUX5, rue Jacques-Brel33185 LE HAILLANTel.: +33 (0)5.56.34.88.36Fax: +33 (0)5.56.34.25.74

23 PRB ROUENRue du Pré aux Bœufs76800 ST ÉTIENNE-DU-ROUVRAYTel.: +33 (0)2.32.80.11.22Fax: +33 (0)2.35.66.37.17

24 PRB CHAMBÉRY1558 avenue de la Houille Blanche73000 CHAMBÉRYTel.: +33 (0)4.79.69.22.57Fax: +33 (0)4.79.69.22.08

25 PRB ST RAMBERTD’ALBON2B rue de l’Avenir26140 SAINT-RAMBERT-D’ALBONTel.: +33 (0)4.75.23.83.16Fax: +33 (0)4.75.23.29.47

An international presence

PRB SitePLANTS 16 rue de la TourCS 1001885150 LES ACHARDSTel.: +33 (0)2.51.98.10.10Fax: +33 (0)[email protected]

LOGISTICS7 rue Michel Breton85150 LES ACHARDS

1

1

43

5

6

10

8

9

712

11

2

13

22

2018

15

1716

19

21

14

23

24

25

1 - FACADES (except for specific EWI) SMOOTHING RENDERS / RENDER UNDERCOATS Standard render under-coats and single-coat under-coats • Rehabilitation render under-coat ............................. p 8

COLOURED / SINGLE-COAT FACADE RENDERS Normal single-coat: heavy and semi-heavy • Lightweight and semi-lightweight single-coats ................................ p 9

MINERAL FINISH RENDERS .......................................................................................................... p 10

REFURBISHMENT – RESTORATION – HERITAGE .................................................................. p 10

SCULPTED MORTARS AND RENDERS Patterns • Stencils • Styldécor accessories ................... p 10

OTHER RENDER Air tight sealing render .............................................................................................. p 13

COMPLEMENTARY PRODUCTS Cleaning and rehabilitation • Crack treatment • Additives • Water repellents ................................................ p 13

Fixing • beads and corners • Other accessories .......................................................................................... p 14

2 - EWI (except for insulation) PREPARATION Fixing & blocking panels • Filling and box holes ............................................................. p 15

FRAMES AND FIXINGS Profiles ....................................................................................................... p 16

Anchors ..................................................................................................................................................... p 19

Frames • Insulating fixings (accessories) ..................................................................................................... p 21

Other accessories ...................................................................................................................................... p 24

FINISHES Thick render........................................................................................................................... p 25

3 - FLOOR PREPARATION SEALING - WATERPROOFING - RESINS Primers • Systems ........................................................ p 25

Coatings .................................................................................................................................................... p 26 PRIMERS FOR FLOOR RENDERS AND ADHESIVE MORTARS .......................................... p 26

FLOOR LEVELLING AND SMOOTHING Improved ......................................................................... p 26

Quick setting fibred or not • Anhydrite, calcium sulphate based • Other floor mortars .................................... p 27

SCREEDS Screed mortars ..................................................................................................................... p 27

Hydraulic binders for screeds ...................................................................................................................... p 28

4 - TILING UNDER-TILE AND UNDER-SCREED SYSTEMS Watertightness and sealing products ............................................................................................................p 28

Sealing membrane, mats and bands • under-tiling acoustic insulation ............................................................p 29

FIXING TILING Adhesive mortars ....................................................................................................................................... p 31

Adhesives .................................................................................................................................................. p 32

Technical adhesives • Adhesives for traditional installation ........................................................................... p 33

TILING GROUTING Cement grout • Resin grout ................................................................................... p 33

5 - PAINTERS & FLEXIBLE FLOOR COVERING SPECIALISTS LIQUID PAINTS Adhesive primers • Key coats • Interior paints • Exterior paints ................................................................... p 35

FWC Flexible waterproof covering ..................................................................................................................p 36

STRUCTURED COATINGS TPC Thick Paint Coatings ......................................................................... p 37

Thick FWC • TMC Thick Mineral Coating • Paint and TPC additives ................................................................ p 38

ADHESIVES FOR FLEXIBLE COVERINGS Flooring adhesives • Wall adhesives • Speciality adhesives .......................................................................... p 38

6 - PW & CARCASS MORTARS AND CONCRETES Masonry: mortars and concretes • Standard concretes (non-structural) p 39

BINDERS Lime • Cements ..................................................................................................................... p 40

ROADS Embedding and blocking.............................................................................................................. p 40

REPAIR PROTECTION AND EMBEDDING MORTARS Concrete repairs • Carcass waterproofing and protection ...............................................................................p 41

WALL SKIM COAT RENDERS Mineral levellers • Organic levellers ................................................... p 41

7 - INSULATION EPS Facade • 2F Grooved • Basements .................................................................................................... p 42

ROCKWOOL Facade .............................................................................................................................. p 45

8 - SELF SERVICE & PC BUILDER SS Treatment products • Wall preparation renders • Cements ................................................. p 45

Mortars ..................................................................................................................................................... p 47

Complementary products ............................................................................................................................ p 48

PLASTER SS Plaster board specialist – Plasterer ................................................................................... p 48

TILING SSPrimers for floor renders • Floor levelling products • Waterproofing

and sealing products .................................................................................................................................. p 51

Laying tiling • Grouting tiling ....................................................................................................................... p 52

OTHER PRODUCTS Floor treatment • Additives • Pastes .................................................................... p 54

9 - THRESHOLDS, SUPPORTS & CORNICES EPS RENDER Supports • Bands • Guides • Cornices ........................................................................... p 56

CONCRETE Thresholds and supports ..................................................................................................... p 58

10 - OTHER TOOLS AND CONSUMABLES Tiler combs and kits • Floats • Levels

Broad knives • Trowels • Miscellaneous containers • Adhesive tape • Protective film ................................... p 59

11 - PRODUCT INDEX .................................................................................................................... p 64

PRBGENERAL

BROCHURE

Keys– Average consumptions calculated on flat and smooth bases.– T.S: Technical sheet. – A.T: Technical specification issued by the CSTB

(French Scientific and Technical Centre for Construction).

– Qualification certificate issued by the CSTB.– DTU: Unified Technical Documents.– : Compliant with essential requirements.

N.B. : Document not contractually binding. Before any use of products, consult the corresponding technical sheet for more detailed information.

summary

www.prb.fr3PRB - GENERAL BROCHURE

Summary

Jacques LAURENT: my wonderful mason’s story

1953

From the age of fourteen, he started his apprenticeship with his father and his two brothers at Chaillé-sous-les-Ormeaux (85).

1960

Jacques LAURENT leaves for his national service in Algeria for 28 months where he participated in building different constructions and forts.

1962

Just two days after his return from Algeria, he set up his first building site, a boundary wall, which is still standing 47 years later. He was hardly more than 22 years old when he set up his building company in Nieul-le-Dolent – birthplace of his mother's family – together with his wife Marie-Luce. Jacques LAURENT accepted his second job which no contractor would take on due to its size (2000 m²), the "Cercle St Pierre" “ in Nieul-le-Dolent. He successfully built this auditorium, assisted only by 2 labourers, “as for my wife, she was already drawing up the quotations and doing the accounts “.

1974

Looking at his balance sheet, the figures speak for themselves, "render" is a loss maker so he decides to act... Jacques LAURENT goes to Germany to look for a spraying machine and then draws up specifications and creates a render for the business with his employees. Customers, partners and competitors find this render to be both elegant and stable and so he begins to market this new one-coat render.

1975

Jacques LAURENT develops the "ideal" render. He quite naturally called it PRB 85 – Produits de Revêtement du Bâtiment 85 – to show his strong attachment to his Vendée origins (85 is the Vendée département number). This is the start of an exceptional adventure. A tireless worker, perfectly supported by his wife Marie-Luce, they set out together to make their mark on the facades of Vendée, France and the world.

Jacques LAURENT was still only a child when he built his first small brick houses. His father was already in the construction industry and Jacques LAURENT was to follow him. His father gave him his love of a job well done.

1953 Jacques LAURENT joins the family business. 1975 The first PRB plant U1.

“be organised, efficient, and have an eye for detail”Jacques LAURENT (1939-2009) and Marie-Luce LAURENT

Phot

o.©

PRB

Jean-Jacques LAURENTChairman of the Board

“My father passed on to me the taste for work well done; it isn't a question of changing the spirit, but simply of continuing what he has done up to this point in time. This means manufacturing good products and maintaining good customer relations and the family spirit."

1976 – Mock-up of the first PRB bag Current bag4PRB - GENERAL BROCHURE

1975 • Birth of PRB

Founding of PRB (Produits de Revêtement du Bâtiment) in La Mothe-Achard and the first facade rendering production unit, strategically located by a railway line.The first company founded by Jacques LAURENT in 1962 allowed him to carry out the first tests on renders which were later sold under the “PRB” brand as early as 1975. The first render was called “PRB 85”.

1980 • Unit 2

Five years after creating its first plant, PRB inaugurated a second unit (U2) used for the production of hydraulic binder based products such as other facade renders and sub-renders.It is characterised by a high level of technology in relation to the specificity of the activity and marks the acceleration of the development of the different product lines. The work force was 22 at the time.

1981 • La Sablière

Sand is an essential component in the production of PRB products. Jacques LAURENT decided to find a raw materials site making it possible to extract clean sand.By chance he came across a 50 ha sandy site in La Boissière-des-Landes, which he purchased and quite naturally called “Sablière de la Lande”.

1986 • The PRB network

In order to distribute his products nationally, in 1986 Jacques LAURENT decided to use rail transport and created a network of logistics warehouses.In 2015, PRB had 24 national warehouses regularly supplied by the logistics platform in Vendée.Opening of the first PRB platform in Marcoussis (91) followed by the Rennes (35), Le Cannet (83) and Bordeaux (33) platforms in 1990.

1994 • Unit 3

PRB built a third 2500 m² unit (unit 3 and 4) which was fully automated, to produce organic binder based decorative products. The company thereby diversified its offer by proposing ready-to-use products (paste tiling adhesive, paste levellers, thick plastic coverings and paints).

1997 • Unit 5

PRB invested in a production unit for hydraulic binder based renders in order to increase its production capacity. Fully automated and computerised, unit 5 guarantees strict raw material dosage and constant product quality.Its specificity is that it can produce facade renders, tiling adhesives, floor levellers and fine grouting at the same time. It can also bag the small packaging lines. Opening of a fourth platform in Lyon (69).

1998 • Cement terminal

PRB installed two silos of a total of about 7000 m3 of storage on the La Cabaude commercial port in Sables d’Olonne.Currently, the silos are used to receive white cement which at the time was imported by truck and is now imported by ship, thereby reducing CO2 emissions.

1999 • ISO certification

PRB obtained ISO 9001 quality certification for its design, production and sales activities for industrial mortars, renders, tiling adhesive and coverings for the building industry.The objective of PRB’s quality approach is to permanently improve its products and services in order to increase customer satisfaction and loyalty.Opening of 2 PRB platforms in Tours (37) and Marseilles (13).

2003 • Unit 6

Creation of a giant plant, with 10,500 m² of storage, used to manufacture hydraulic binder based products to support growing render and adhesive product sales.

Unit 6 is organised around a production line fitted with two 10 nozzle bagging units and pulled off the technical exploit of producing one 25 kg bag per second.Every day it processes 2,000 tonnes of product, representing 1/3 of PRB render production which is of 600,000 tonnes per year.Opening of 3 PRB platforms in Carpentras (84), Vendargues (34) and Toulouse (31).

2008 • PRB grows…

In order to meet the needs of increasing activity and store raw materials, unit 6 was extended by the construction of 6 additional 1200 m3 silos.The same year, PRB purchased a plot of 6.3 ha located on the other side of the dual carriageway connecting La Roche-sur-Yon to Sables d’Olonne in order to build a future platform. PRB had a 24 metre long tunnel dug to directly connect the 2 sites.

2009 • PRB in mourning

This year was marked by the death of Jacques LAURENT, who founded PRB.Many tributes were paid to the exceptional success of this native of Chaillé-sous-les-Ormeaux, a mason’s son and brother, who was at the origin of PRB’s industrial success, currently the 3rd French producer of facade renders. PRB extended its storage platform to the west of the site by 4410 m2 .The U2 laboratory was demolished to clear space for a central truck lane.PRB obtained its ISO 14001 quality certification for its entire environmental approach, for its production site and its warehouses.Opening of 2 platforms in Orleans (45) and Dijon (21).

2010 • Unit 7 & building 11

Construction of unit 7 to produce paste tile adhesive. Its efficient process allows it produce large quantities, thereby offloading production from units 3 and 4.Construction of a building grouping together all the administrative departments and senior management.Opening of 4 PRB platforms in Poitiers (86), Quimper (29), Perpignan (66), and Nancy (54)

2011 • Dock and platform

Opening of the logistics platform and the reception building to decongest the plant entrance by optimising the flow of trucks.At the same time PRB extended the dock near its production site and the rail platform at its Rognac warehouse in order to massively expand the transport of products to its warehouses in the south of France by privileging rail transport as much as possible.Opening of a PRB platform in Clermont-Ferrand (63)

2012 • Unit 9 & shop

Creation of unit 9, a new plant for the production of polystyrene insulating panels, a material used as part of external wall insulation systems by PRB.Opening of a new storage platform of 4410 m3 which PRB had acquired in 2009.Opening of two PRB platforms in Quiéry-la-Motte (62) and Pau (64).

2013 • Unit 8

Creation of unit 8 for the production of fine joints and renders. Based on the best production processes in the existing plants, it provides highly flexible production.Assembly of a third 3700 m3 silo on the la Cabaude commercial port in Sables d’Olonne making it possible to stock different cements.Opening of 2 PRB platforms in Chambéry (73) and Mitry-Mory (77).

2015-2016 • Espace Jacques LAURENT

Construction of the Espace Jacques LAURENT, on 3 levels: a show-room, a reception area and a 240 seat auditorium. The flat roof has a view over the entire PRB site. ISO 50001 energy certification.

PRB: The history

2015-2016 Construction of the Espace Jacques LAURENT.

www.prb.fr5

4 5PRB - PRODUITS POUR REVÊTEMENTS SOUPLES www.prb.fr

Émissions dans l’air intérieurDepuis 2012, les produits de construction et de décoration sont munis d’une étiquette qui indique, de manière simple et lisible, leur niveau d’émission en polluants volatils.* Information sur le niveau d’émission de substances volatiles dans l’air intérieur, présentant un risque de toxicité par inhalation, sur une échelle de classe allant de A+ (très faibles émissions) à C (fortes émissions)

L’EMICODE®

C’est une marque déposée pour un système de classification, des produits de pose, colles et produits de construction, en fonction de leur comportement émissif.EC1PLUS, respecte les critères de classification les plus strictes.

Le Label SNJFLe certificat “Label SNJF” est un label français qui s’applique aux mastics de jointoiement. C’est un véritable gage de qualité pour l’utilisateur.

ACERMIL’ARCERMI accompagne de manière neutre et indépendante l’innovation des isolants. Elle valide en usine et en laboratoire les caractéristiques des isolants thermiques tels que le PSE.

PRB adhère à ECODDSECODDS est un éco-organisme chargé d’organiser le fonctionnement et d’assurer la pérennisation de la filière des Déchets Diffus Spécifiques des ménages dans des conditions respectueuses de l’environnement et de la santé. En adhérant à ECODDS, PRB finance ces missions sous forme d’éco-contribution.

Le point vert d’ECO-EMBALLAGES Il a été crée il y a 20 ans et contrairement aux idées reçues il n’informe pas sur le recyclage du produit, mais indique que PRB participe financièrement à la collecte, au tri et au recyclage des emballages ménagers.

PEFC, une gestion durable pour des produits écoresponsables.PRB édite l’ensemble de ses catalogues avec des produits issu de forêts gérées durablement et de sources contrôlées.

PRB choisi un imprimeur, labélisé imprim’vert ! Ce label à pour objectif de favoriser la mise en place, par les imprimeurs, d’actions concrètes visant à diminuer les impacts de leur activité sur l’environnement.

Vos repères PRB

Marquage CE Certification QB

Sol intérieur Mur intérieur Plafond Sol extérieur Mur extérieur Toiture Appentis Plan de travail Paroi enterrée Piscine

Zones d’applications des produits

SAC AVEC POIGNÉE=

PLUS FACILE À TRANSPORTER

Émissions de poussières réduites avant gâchage.

Pigments spécifiques autorisant l’application de teintes sombres et soutenues en façade.

Produit ignifugé Séchage rapide du produit

Produit sans solvant suivant la définition

de la norme EN 923 : 2015

Moins de produit pour un même

rendement.

Une poignée, pour un sac plus pratique à prendre en main.

Exemple d’un marquage QB de mortier colle.

Domaine d’emploi du produit

Référentiel de certification

Classification du produit

N° de certificat

Exemple d’un marquage CE de mortier colle.

N° DOP (Déclaration de performance)

Norme NF EN

Nom du produit

Identification du fabricant

Caractéristiquesessentielles

Qualité & PerformanceL’amélioration continue est ancrée au cœur de notre fonctionnement et c’est notamment pour cette raison que nous travaillons quotidiennement à l’optimisation des process pour mettre au point des produits performants et durables. Pour répondre à cette stratégie nous favorisons l’investissement dans de nouveaux outils de production ainsi que dans la Rechercher & Développement.

PRB choisit aussi de travailler avec des organismes de certification et de contrôle, vous garantissant ainsi la qualité et la performance de nos produits. Les certifications et labels vous apportent la certitude qu’ils respectent un cahier des charges précis et qu’ils sont évalués de façon neutre et indépendante.

Environnement & ÉnergieLa préservation de la ressource énergétique est une considération essentielle de notre démarche environnementale. Elle est intégrée à tous les niveaux de la société. De nos achats d’outils de production aux gestes quotidiens des équipes, nous avons fait de la performance énergétique une priorité.

Pour répondre à cette problématique d’épuisement des ressources, nous favorisons aussi le transport ferroviaire. Ce type de flux logistique, alternatif au transport routier, est utilisé entre notre site de production vendéen et nos points de distribution du sud de la France.

Diminuer, trier, recycler et valoriser nos déchets sont aussi des préoccupations quotidiennes. Aujourd’hui nous valorisons la majorité de nos résidus.

Local & DurableL’intégration locale fait partie des gènes de la société depuis sa création. Elle est déployée à travers la participation aux événements sportifs et culturels de la région : Vendée Globe, clubs sportifs, festivals, Puy du Fou…

Nos certifications

Conformités réglementaires, labels et pictogrammesDéveloppement durable & Qualité

SANSSOLVANT

Selon la norme EN 923 : 2015

ECO DDS LOGOTYPE

PR

BSun

Sun

SunSéchageRapide

PRB - GENERAL BROCHURE www.prb.fr6

PRB

The coating of façades was once a technique, PRB has now made it an art.An art which combines the richness of the material and harmony of the colours.Beyond just being a range of rendering for protecting, insulating and decorating façades, PRB's research teams have developed a comprehensive range of products to resolve all problems that architects, painters, bricklayers and façade specialists or tilers come up against in the different stages of construction.For several years, PRB 1st independent manufacturer and 3rd single-coat render producer in France, has been consolidating its offer of products for tilers, floor specialists, masons, painters and the general public.To make this vision a success, we must carry on improving our products, maintain customer relationships, profits and the family spirit.

Our 5 strategic directions 1. Provide better customer service. Improve products, stock availability, order management...2. Diversify. Develop mortars, small packaging and DIY Superstore markets.3. Avoid profit margin erosion. Lower procurement and production costs, improve productivity.4. Limit environmental impacts. Control water releases, chemical risks and atmospheric pollution.5. Maintain the Company’s human values. Keep good soft skills, creativity and efficiency in everyday situations.

PRB in numbers• 1st independent and 3rd producer of facade renders in France• A 50 ha site• 600,000 tonnes of products produced every year• 110,000 m2 of industrial buildings • 24 warehouses all over France• A 125 people sales force• Over 500 employees• A turnover of 182 million € annually (2015 figures)

4 5PRB - PRODUITS POUR REVÊTEMENTS SOUPLES www.prb.fr

Émissions dans l’air intérieurDepuis 2012, les produits de construction et de décoration sont munis d’une étiquette qui indique, de manière simple et lisible, leur niveau d’émission en polluants volatils.* Information sur le niveau d’émission de substances volatiles dans l’air intérieur, présentant un risque de toxicité par inhalation, sur une échelle de classe allant de A+ (très faibles émissions) à C (fortes émissions)

L’EMICODE®

C’est une marque déposée pour un système de classification, des produits de pose, colles et produits de construction, en fonction de leur comportement émissif.EC1PLUS, respecte les critères de classification les plus strictes.

Le Label SNJFLe certificat “Label SNJF” est un label français qui s’applique aux mastics de jointoiement. C’est un véritable gage de qualité pour l’utilisateur.

ACERMIL’ARCERMI accompagne de manière neutre et indépendante l’innovation des isolants. Elle valide en usine et en laboratoire les caractéristiques des isolants thermiques tels que le PSE.

PRB adhère à ECODDSECODDS est un éco-organisme chargé d’organiser le fonctionnement et d’assurer la pérennisation de la filière des Déchets Diffus Spécifiques des ménages dans des conditions respectueuses de l’environnement et de la santé. En adhérant à ECODDS, PRB finance ces missions sous forme d’éco-contribution.

Le point vert d’ECO-EMBALLAGES Il a été crée il y a 20 ans et contrairement aux idées reçues il n’informe pas sur le recyclage du produit, mais indique que PRB participe financièrement à la collecte, au tri et au recyclage des emballages ménagers.

PEFC, une gestion durable pour des produits écoresponsables.PRB édite l’ensemble de ses catalogues avec des produits issu de forêts gérées durablement et de sources contrôlées.

PRB choisi un imprimeur, labélisé imprim’vert ! Ce label à pour objectif de favoriser la mise en place, par les imprimeurs, d’actions concrètes visant à diminuer les impacts de leur activité sur l’environnement.

Vos repères PRB

Marquage CE Certification QB

Sol intérieur Mur intérieur Plafond Sol extérieur Mur extérieur Toiture Appentis Plan de travail Paroi enterrée Piscine

Zones d’applications des produits

SAC AVEC POIGNÉE=

PLUS FACILE À TRANSPORTER

Émissions de poussières réduites avant gâchage.

Pigments spécifiques autorisant l’application de teintes sombres et soutenues en façade.

Produit ignifugé Séchage rapide du produit

Produit sans solvant suivant la définition

de la norme EN 923 : 2015

Moins de produit pour un même

rendement.

Une poignée, pour un sac plus pratique à prendre en main.

Exemple d’un marquage QB de mortier colle.

Domaine d’emploi du produit

Référentiel de certification

Classification du produit

N° de certificat

Exemple d’un marquage CE de mortier colle.

N° DOP (Déclaration de performance)

Norme NF EN

Nom du produit

Identification du fabricant

Caractéristiquesessentielles

Qualité & PerformanceL’amélioration continue est ancrée au cœur de notre fonctionnement et c’est notamment pour cette raison que nous travaillons quotidiennement à l’optimisation des process pour mettre au point des produits performants et durables. Pour répondre à cette stratégie nous favorisons l’investissement dans de nouveaux outils de production ainsi que dans la Rechercher & Développement.

PRB choisit aussi de travailler avec des organismes de certification et de contrôle, vous garantissant ainsi la qualité et la performance de nos produits. Les certifications et labels vous apportent la certitude qu’ils respectent un cahier des charges précis et qu’ils sont évalués de façon neutre et indépendante.

Environnement & ÉnergieLa préservation de la ressource énergétique est une considération essentielle de notre démarche environnementale. Elle est intégrée à tous les niveaux de la société. De nos achats d’outils de production aux gestes quotidiens des équipes, nous avons fait de la performance énergétique une priorité.

Pour répondre à cette problématique d’épuisement des ressources, nous favorisons aussi le transport ferroviaire. Ce type de flux logistique, alternatif au transport routier, est utilisé entre notre site de production vendéen et nos points de distribution du sud de la France.

Diminuer, trier, recycler et valoriser nos déchets sont aussi des préoccupations quotidiennes. Aujourd’hui nous valorisons la majorité de nos résidus.

Local & DurableL’intégration locale fait partie des gènes de la société depuis sa création. Elle est déployée à travers la participation aux événements sportifs et culturels de la région : Vendée Globe, clubs sportifs, festivals, Puy du Fou…

Nos certifications

Conformités réglementaires, labels et pictogrammesDéveloppement durable & Qualité

SANSSOLVANT

Selon la norme EN 923 : 2015

ECO DDS LOGOTYPE

PR

BSun

Sun

SunSéchageRapide

Sustainable development & Quality

PRB - GENERAL BROCHURE www.prb.fr7

Quality & PerformanceContinuous improvement is at the core of our operations, which is why we work to optimise our processes to develop effective and durable products every day. To apply this strategy we invest in new production tools and in Research & Development.

PRB has also chosen to work with certification and inspection bodies, guaranteeing the quality and performance of our products. Certification and labels bring you the guarantee that they comply with specific specifications and are assessed objectively and independently.

Environment & EnergyThe protection of energy resources is one of the essential concerns of our environmental policy. It is present at all levels of the company. From the purchase of our production tools, to the everyday work of our teams, we have made energy performance a priority.

To mitigate resource depletion issues, we also favour rail transport. This type of logistics flow, which is an alternative to road transport, is used between our production site in the French Vendée region and our distribution points in the south of France.

The reduction, sorting and recycling of our waste is also an everyday concern. Currently, we recycle most of our waste.

Local & SustainableLocal integration has been in the company’s DNA from the very beginning. It is materialised by our participation in regional sports and cultural events: Vendée Globe, sports clubs, Puy du Fou…

Our certificationsQual i ty Energy Environment

8PRB - GENERAL BROCHURE

1 • FACADES (except for specific EWI)

Tub weight ConsumptionAdvantages ColourName & Use

SMOOTHING RENDERS / RENDER UNDERCOATSStandard render undercoats and single-coat base layers

Rehabilitation sub-render

25 kg

16 to 17 kg/m2 approx. for

10 mm of thickness

Greyor

White

First application of a traditional two or three layer render system for walls Ideal for older buildings Breathable and strong

Mechanical or manual application Authorised substrates Rt2 and Rt3 Compatible with ceramic coverings, organic coverings (paint and thick

paint coverings), hydraulic and mineral decorative renders

Sub-render for external walls of the Rt2 and Rt3 type and interior walls Workability and flexibility of traditional air-slaked lime renders Lets the substrate breath Can be covered with a terra cotta tile finish

Mechanical or manual application Authorised substrate Rt3 Compatible with ceramic coverings, organic

coverings (paint and thick paint coverings), hydraulic and mineral decorative renders

Applicable on in-ground parts (See DTU 20.1) Adapted to base coats and render bodies

Sub-render for external walls of the Rt3 type and interior walls Associated coverings: ceramic, paint and thick paint covering, hydraulic renders

Weatherproofing of external walls of the Rt1, Rt2, Rt3 type and older masonry Smoothing render for interior Rt1, Rt2, Rt3 and older masonry interior walls Can be covered using: paint, thick paint covering, thick mineral covering, renders Lets the walls that are heavily coated in air-slaked lime breathe

Waterproofing and decoration of outside walls of the Rt1, Rt2 and Rt3 type (see conditions) and interior walls All types of finish (fine scratched, floated, flattened and sprayed...) Can be buried (see conditions)

Weatherproofing of external walls of the Rt3 type and interior walls Associated coverings: , paint and thick paint covering, hydraulic renders Can remain uncoated and can be buried

Weatherproofing and decoration for external walls of the Rt3 type and interior walls

Ideal for sponge floating Smooth and fine finish Render can be used in-ground

Sub-render coat for the weatherproofing of external walls of the Rt3 type and interior walls

Associated coverings: ceramic, paint and thick paint covering, hydraulic renders Can remain uncoated and can be buried

Weatherproofing of external walls of the Rt3 type and interior walls Associated coverings: ceramic, paint and thick paint covering, hydraulic renders Can remain uncoated and can be buried

Weatherproofing of external walls of the Rt1, Rt2 and Rt3 type and interior walls Associated coverings: paint and thick paint covering, OC1, OC2 CSIII and

CR CSIII hydraulic renders Low consumption thanks to the low load Buffers stress between the substrate and the finish Application in thick layers with low shrinkage

Rehabilitates ageing interior and exterior masonry containing saltpetre and/or damp Coverable, it can also remain bare

PRB BELLE ÉPOQUE SOUS-ENDUITGP TypeClass CS II (white) and III (grey)Traditional lime sub-render

Grey 30 kg


20 to 30 mm layer

i.e. 10 kg/cm thickness

PRB SC 150R typeClass CS IRehabilitation sub-render

Grey 25 kg


10 mm of thickness

PRB TRADI GPGP TypeClass CS IIIAir-slaked lime render body

Grey


10 mm of thickness

25 kg

PRB EP 18GP TypeClass CS IITraditional cement-lime sub-render

Grey 25 kg


10 mm of thickness

PRB EP 14GP TypeCS IV classTraditional cement sub-render

Cement grey25 kg

18 kg/m2 approx. for

10 mm of thickness

PRB TRADITIONNEL 160GP TypeCS IV classTraditional sub-render

Grey 25 kg

14.5 kg/m2 approx. for

10 mm of thickness

PRB SUPERBRUT SOUS-ENDUITOC2 TypeClass CS IISemi-lightweight fine grained single-coat render

Grey 25 kg


10 mm of thickness

PRB SC GRISOC1 TypeClass CS ILightweight fine grain single-coat render

Light greyor

Dark grey25 kg


10 mm of thickness

PRB TRADICLAIR 170OC3 TypeClass CS IIISemi-heavy single-coat sub-render

Dark grey 25 kg


10 mm of thickness

PRB TRADITAL SOUS-ENDUITOC3 TypeClass CS IIISemi-heavy single-coat render undercoat

Grey 25 kg


10 mm of thickness

PRB CLASSIC FOC3 TypeCS IV classHeavy fine grained single-coat render undercoat

Grey 25 kg


10 mm of thickness

PRB SE ALLÉGÉLW TypeClass CS IILightweight sub-render

Grey 25 kg


10 mm of thickness

PRB TRADICLAIR 190 L and Fibre versionOC3 TypeCS IV classSemi-heavy single-coat render undercoat

NEW

NEW

NEW

www.prb.fr

ConsumptionPackaging weightColourAdvantagesName & Use

Lightweight and semi-lightweight single-coats

COLOURED FACADE RENDERS / SINGLE-COATNormal single-coat products: heavy and semi-heavy

www.prb.fr9

100colours

PRB25 kg


10 mm of thickness

PRB 85OC3 TypeClass CS IIISemi-heavy medium grain single-coat render

24 colours 25 kg


10 mm of thickness

PRB TRADITALOC3 TypeClass CS IIISemi-heavy fine grain single-coat render

100colours

PRB25 kg


10 mm of thickness

PRB 85 HOC3 TypeCS IV classSemi-heavy medium grain single-coat winter (H) render

100colours

PRB25 kg


10 mm of thickness

PRB 6000 ROC1 TypeClass CS ILightweight fine grain single-coat render

100colours PRB+

30 kg


10 mm of thickness

PRB FINICHAUXOC1 TypeClass CS ILightweight, medium grain, single coat, lime render

100colours

PRB20 kg


10 mm of thickness

PRB LOOKOC1 TypeClass CS ISuper-lightweight medium grain single-coat render

100colours

PRB25 kg


10 mm of thickness

PRB OZÉOC2 TypeClass CS IIISemi-lightweight fine grained single-coat render snow colour (very pure white)

100colours

PRB

100colours

PRB

20 kg

25 kg


10 mm of thickness


10 mm of thickness

PRB SUPERBRUTOC2 TypeClass CS IISemi-lightweight fine grained single-coat render

PRB LE MANUELOC2 TypeClass CS IISemi-lightweight fine grain single-coat manual render

100colours

PRB25 kg


10 mm of thickness

PRB TRADICLAIR PROC3 TypeClass CS IIISemi-heavy fine grain single-coat render

100colours

PRB25 kg


10 mm of thickness

PRB TRADI HOC3 TypeCS IV classSemi-heavy fine grain single-coat winter (H) render

100colours

PRB30 kg


10 mm of thickness

PRB ALG GFOC1 TypeClass CS IIILightweight fine grain single-coat render

White naturally lumi-

nous25 kg


10 mm of thickness

PRB BLANC CRISTALOC3 TypeClass CS IIISingle-coat luminous white, heavy, fine-grain render

Waterproofing and decoration of outside walls of the Rt3 type and internal walls All types of finish (fine scratched, floated, flattened and rustic...) Render can be used in-ground

Weatherproofing and decoration of external walls of the Rt3 type and interior walls

All types of finish (scratched, fine scraped, floated...)

Weatherproofing and decoration of external walls of the Rt3 type and interior walls Scratched and rustic finish Render can be used in-ground

Weatherproofing and decoration of external walls of the Rt3 type and interior walls Ideal for sponge floating Smooth and fine finish Render can be used in-ground

Weatherproofing and decoration of external walls of the Rt3 type and interior walls Scratched and rustic finish Render can be used in-ground

Weatherproofing and decoration of external walls of the Rt3 type and interior walls

All types of finish (fine scratched, floated, flattened and and rustic...) Render can be used in-ground

Weatherproofing and decoration of external walls of the Rt1, Rt2 and Rt3 type and internal walls Ideal for a fine scraped and floated render Other finishes (rustic, flattened rustic, sponge floated) Fine grain size reducing soiling Micro-fibred and lime-rich render

Waterproofing and decoration of outside walls type RT1, RT2 and RT3 and interior walls

All types of finish (scratched, rustic, flattened rustic, sponge floated...)

Micro-fibred, lime-rich render, perfectly suited to aged buildings. Lets the walls breathe

Weatherproofing and decoration of external walls of the Rt1, Rt2 and Rt3 type and internal walls Scratched, rustic and flattened rustic finish Suitable for fragile substrates

Weatherproofing and decoration of external walls of the Rt1, Rt2 and Rt3 type and internal walls All types of finish (fine scratched, rustic and flattened rustic,

floated...) Its specific formulation makes it especially suitable for low strength masonry

Waterproofing and decoration of outside walls Rt1, Rt2 and Rt3 type (see conditions) and interior walls All types of finish (fine scratched, floated and sprayed...) Can be buried (see conditions) 20 kg bag

Weatherproofing and decoration of external walls of the Rt2 and Rt3 type and internal walls All types of finish (fine scratched, floated, rubbed, visible stonework) Specific formulation for flexible and easy manual use

Weatherproofing and decoration of external walls of the Rt2, Rt3 type and interior walls All types of finish (scratched, fine, rustic, flattened, floated, rubbed...)

PRB - GENERAL BROCHURE

1 • FACADES (except for specific EWI) continued

ConsumptionPackagingweightColourName & Use Advantages

MINERAL FINISH RENDERS

REFURBISHMENT - RESTORATION - HERITAGE

32colours

PRB25 kg

2 kg/m2 ± 0.5 kg/m²

PRB CRÉPITALType CR

Lime finishing render

Whiteor

Stone25 kg

1.5 to 2 kg/m² ± 0.5

0.7 to 1 kg/m² ± 0.3

PRB CRÉPICHAUX SOUS-COUCHEType CRTwo application finishing render

PRB CRÉPICHAUX FINITION

Off white

25 kg

3 to 6 kg/m2

approx. for 2 to 4mm.

layer

PRB RÉNOMUR TOPIntermediate base coat for the PRB Rénomur Top system technique

Off white

25 kg

4.5 to 9 kg/m2

approx. for 3 to 6 mm

layer

PRB RÉNOMUR POUDREIntermediate base coat for the PRB Rénomur Poudre system technique

Off white

20 kg3.2 to

6.4 kg/m2 approx.

PRB RÉNOMUR PÂTEIntermediate base coat for the PRB Rénomur Pâte system technique

100 colours

PRB25 kg

16 to 17 kg/m2 approx. for 8 to 10 mm

layer

PRB BELLE ÉPOQUE FINITION GM/GFType CRClass CS IIDecorative lime-based finishing render fine or medium grain

SCULPTED MORTARS AND RENDERS

Grey(other

colours contact PRB)

100 PRB colours

25 kg

25 kg

17 kg/m2/cm thickness


10 mm of thickness

PRB MORTIER PAYSAGERType CRCS IV classMicro mortar for the creation of decorative structures

PRB STYLDÉCOROC2 TypeClass CS IIDecorative render for the creation of facadedecors and cornices

100colours

PRB

YellowTouraineand Off white

25 kg

25 kg


5 mm of thickness


layer

PRB MANUPROType CRCS IV classManual, medium grain, finishing render

PRB ENDUIT DE FAÇADE TYROLIENCR typeCS IV classDecorative finishing render for sprayed finishes

NEW

NEW

NEW

3rd layer of decorative finish for a traditional render in two or three layers for external walls Scratched, floated, trowel scratched, trowel smoothed, sponge aged, sand aged, visible stonework finishes Render can be used in-ground

Decorative coating applied over a traditional two layer render or over a base coat of grey single-coat render “Granulated” finish, rough or flattened

Facade protection and decoration Fine grain Ready-to-mix powdered products with a base coat and a finish Smooth, trowel smoothed and brushed finish Ready to mix with water

Facade protection and decoration Medium grain, powdered mineral coating Float finish appearance and very matt finish High permeability to water vapour Ready to mix with water

3rd layer of decorative finish for a traditional render in two or three layers for exterior walls Finishes: scratched, floated, trowel scratched, trowel smoothed, sponge aged, sand aged, visible stonework

Ideal for facade specialists and painters (large selection of hydraulic and organic finishes) Paint and thick paint coating refurbishment without stripping Avoids managing site waste Avoids the use of harmful and polluting solvents Hides repairs

Ideal for facade specialists (large selection of hydraulic and organic finishes) Refurbishment of existing render without scraping Avoids managing site waste Hides repairs

Ideal for painters (large selection of organic finishes) Paint and thick paint coating refurbishment without stripping Avoids managing site waste Avoids the use of harmful and polluting solvents Hides repairs

Creation of decorative structural elements such as imitation rocks, wall building, modelling, landscapes, miscellaneous shapes Restoration and repair of natural hard stone Can be applied in thick layers up to 15 cm

Application via mechanical spraying and/or manually Patterned or stencil finishes (see PRB STYLDECOR accessories from the “Sculpted mortar and renders” catalogue and brochure)

1 • FACADES (except for specific EWI)

10PRB - GENERAL BROCHURE www.prb.fr


Patterns

KPOCHSTYLBRET

STYLPIERRE DE BRETAGNE STENCILS KIT 3 x 3 m (with transport tube)To trace joints before hollowing them out

KPOCHSTYLTRAD

STYLPIERRE TRADITION STENCILS KIT 3 x 3 m (with transport tube)To trace joints before hollowing them out

KPOCHSTYLANCIEN

STYLPIERRE “À L’ANCIENNE” STENCILS KIT 3 x 3 m (with transport tube)To trace joints before hollowing them out

KMATFINIBOIS5

KIT OF 5 STYLBOIS FINISH PATTERNS(cut into a 45 x 100 cm pattern)

KMATFINISCHI3

KIT OF 3 STYLSCHISTE FINISH PATTERNS (cut into a 47 x 130 cm pattern)

STYLBAMBOU FINISH PATTERN40 x 110 cm

KMATFINIBRIK6

KIT OF 6 STYLBRIK FINISH PATTERNS (cut into a 42 x 120 cm pattern)

MATSCHI47X130

STYLSCHISTE FINISH PATTERN 47 x 130 cmTo apply a pattern to PRB STYLDÉCOR render and create a decorative relief

MATBRIK42X120

STYLBRIK FINISH PATTERN 42 x 120 cmTo apply a pattern to PRB STYLDÉCOR render and create a decorative relief

Handle side

Handle side

Handle side

Handle side

MATBOIS45X100

STYLBOIS FINISH PATTERN 45 x 100 cmTo apply a pattern to PRB STYLDÉCOR render and create a decorative relief

Pattern side

Pattern side

Pattern side

Pattern side

Stencils

NEW

NEW




SCULPTED MORTARS AND RENDERS (continued)Styldécor accessories

PLEASE CONTACT US

CUSTOMISABLE STAMP15 x 15 cmTo pattern PRB STYLDECOR render and produce a decorative relief

ROULEMAT

ROLLER FOR PATTERNS(single)

ROULERGOMAT

ERGONOMIC ROLLERFOR PATTERNS(double)

To hollow out the joints MIRCREUJODOUB

HOLLOW JOINTER FOR DOUBLE JOINT 40127

MIRCREUJOCAR

HOLLOW JOINTER FOR SQUARE JOINT 40233

MIRCREUJOROND

HOLLOW JOINTER FOR ROUND JOINT 40232

MIRCREUJFDOUB

HOLLOW JOINTER FOR THIN DOUBLE JOINT 40133

Bag of25 kg

SiennaNatural shadow

RedOchre grey

BlackLight brownDark brown

YellowBlue

OrangeGreen

Pot of 200 ml

Pot of 1 l

Tub of 8 l

SABNE34E

NE34 SAND BAG-25 KG-STYLDECORTo spray onto the render before applying the pattern (release agent effect)

Example withthe PRB logo

PRB PIGMENT SYSTÈME COLOR

SEE SMALL PACKAGING LINE

Result on the render

Used with PRB STYLDÉCOR to add colours to a pattern Used to colour renders, grouts and plasters Strong, softer or pastel colour depending on the dosage



OTHER RENDERS Air-tight sealing render

Severalcolours

available25 kg


5 mm of thickness

PRB 100 RGP/CR TypeClass CS IILightweight, air-tight sealing render

COMPLEMENTARY PRODUCTSCleaning and rehabilitation

Crack treatment

Water repellents

Additives

Pink

Whitematt

Jerrican of20 l

Cartridgeof 310 mli.e. 551 g

(boxof 12)

1 l for 5 m2

15 m of 5 mm diameter joint per cartridge

PRB ACTIDÉMOUSSE FLASHFast curative treatment

PRB JOINT TOPFLEXSingle component, acrylic dispersion based joint

White

Jerrican of20 l

Tank1000 l

As a rough coat: 0.5 to 1 L per bag

As a Slurry: 0.12 l/m2/mmAs a Mortar: 0.6 l/m2/cm

Mortar additive C1 Mortar and Grouting Mortar:

1 l/25 kg

0.05 l per 25 kg bag

0.1 l per 25 kg bag

0.1 l per 25 kg bag

1 l for 4 m2

approx.

0.20 to 0.40 l/m2

PRB LATEXAdhesive and additive resin


Tracingagent

Tracingagent

Jerrican of20 l

Jerrican of5 l

1 l for 5 m2

0.120 to 0.150 l/m2

of solution approx.

PRB ACTIDÉMOUSSE HPCurative and preventive treatment to rehabilitate fa-cadesSEE SMALL PACKAGING LINE

YellowJerrican of

20 lPRB RETARDATEURLiquid additive to delay render setting times

Tracing agent

Jerrican of20 l

Tank1000 l

PRB ACCÉLÉRATEUR FLASHLiquid additive to significantly speed up setting times for renders, mortars and concretes

Tracingagent

Jerrican of20 l

Tank1000 l

PRB ACCÉLÉRATEURLiquid additive to significantly speed up setting times for renders, mortars and concretes

Tracingagent

Jerrican of 20 l

Clear translucent

Metal drum 30 l

PRB HYDROFUGEAqueous phase solution used to waterproof building materialsSEE SMALL PACKAGING LINE

PRB HYDROFUGE WRSHigh powered penetrating water repellent solution

PRB DÉCAPANT CIMENT(PRB ACTIDÉCAP)SEE SMALL PACKAGING LINE

Provides perfect airtightness Lime-based render

Ideal for facades Fast action (4 to 8 h) on contaminated substrates Returns materials to their initial appearance Recommended before painting

Ideal for facades Use to cure or prevent Returns materials to their initial appearance Recommended before painting

Reduces render carbonation Evens render colours Use to eliminate cement blooms on tiles

Ideal for repairing cracks before painting Good adherence without a primer High elasticity up to 30/10ths

Reduces the appearance of shadowing Very high compatibility with paints

Used to obtain high performance mortars Improves the adherence of all mortars Improves mortar workability (fluidifying effect) Improves weatherproofing and reduces the risk of cracks and wear

Used to delay render and mortar setting times without altering product initial and final strength Increases product workability Extends the time before scratching Allows better site management in summer conditions

Used to obtain better initial and final strengths Significantly reduces the time before single-coat renders are

scratched Allows quicker reuse of prefabricated part moulds Improves site profitability

Used to obtain better initial and final strengths Reduces the time before single-coat renders are scratched Allows quicker reuse of prefabricated part moulds Improves site profitability

Preserves the original appearance of the materials Reduces soiling and the growth of micro-organisms Coverable

Top end non film forming and silicone free water repellent: BREATHABLE - DROPLET EFFECT - COVERABLE Waterproofs mineral substrates and prevents future absorption of water Does not alter substrate appearance in the short and long term and there-

fore makes it possible to keep the materials’ original appearance Used to fight against the return of soiling on facades

Name & Use ConsumptionPackagingweightColourAdvantages

Severalcolours

available25 kg


layer

Rich in binders, it provides the adherence between the substrate and the render Application by mechanical spraying Used on concrete, new and existing substrates and is compliant with DTU 26.1

Ready-to-use micro rough coat for mortars (single coat, traditional or decorative...) on concretes Provides adherence between the substrate and the finishing render Easy to use, it is applied using a roller/brush Use on new and existing substrates



Rough coats

Beads and corners Advantages Packaging ConsumptionName & Use

PRB ACCROFIXGP TypeCS IV classRough coat mortar for routine use

Beige 20 kg0.6 to

0.8 kg/m2

15 U pack

15 U pack

15 U pack

15 U pack

15 U pack

15 U pack

15 U pack

15 U pack

15 U pack

15 U pack

15 U pack

33 U pack

10 U pack

25 U pack

33 U pack

PRB ACCROFIX PÂTEPaste-form rough coat

Other accessories

3 M perforated L corner bead with white or beige PVC strip

3 M perforated L corner bead for bases, stops

3 M open V corner bead for 12-15 mm render with white or beige PVC strip

3 M perforated V corner bead with white or beige PVC strip

2.25 M perforated V corner bead with white or beige PVC strip

3 M perforated V corner bead without strip

Open V bead for 7-9 mm render, for render on straight edged insulation

3 M open V corner bead without strip

2.50 M open V corner bead with beige PVC strip

2.25 M open V corner bead with beige PVC strip

3 M open V corner bead without strip

3.03 M bendable perforated L bead

3 M expansion joint bead

2.5 M aluminium corner bead for thin render

3.03 M wire corner bead

Mesh 19 wire 0.65

Frame 100 R pre-shaped 2.6m

Waterproof frame 0.22 x 25 m

Fringed waterproof frame

Fringed waterproof frame

ConsumptionPackagingweightColourAdvantagesName & Use

roll 50 m x 1 m

1

1

roll 1 x 25 m

roll 0.20 x 25 m

First application of a traditional two or three layer render system for walls Ideal for older buildings Breathable and strong

High shock resistance on ground floors (PRB THERMOLOOK EMI) system Allows to withstand category I impacts depending on the finish

Ready-to-mix

Fibred and fireproofed organic mortar Characteristics associated with the Thermopâte system Very good fire resistance Very good resistance to shocks when used for EWI: CAT I (with double normal reinforcement) On EWI in EPS: withstands 70 joules shocks with 1 frame reinforced combined with 1 normal reinforcement

Ready-to-use Cement-free adhesive To fix insulation panels on timber board substrates (CTBX, …)


Advantages Packaging ConsumptionName & Use

2 • EWI (excluding insulating materials)

PREPARATIONFixing and blocking panels

Filling and box holes

Grey and

White25 kg


layer

PRB FONDISOL FFibred mortar for PRB EWI system sub-render

Yellow

Grey

25 kg

25 kg

4.5 kg/m² with single AVN

reinforcement (3 mm thick)

2.3 to 6 kg/m2 depending on

use

PRB FONDICHOCFibred mortar for reinforced sub-render on EWI PRB THERMOLOOK EMI (thin render on insulation)

PRB THERMICOLAdhesive cement for fixing/blocking insulation panels

Grey 15 kg

1.5 kg/m² depending on

the type of comb used

PRB•COL WOODAdhesive to fix insulation panels on timber substrates

Offwhite

20 kg

4 kg/m2 minimum for 2.5 to 3 mm

layer

PRB FONDISOL PEPaste base coat for the PRB Thermopâte EWI system. Exists in a quick-drying version.

Box hole foam To separate and create a box hole between the finish and an element of the building, such as joinery. MOUS5 WHITE PE FOAM 152 LT TH.5MM 20 M X 19MM ROLLS

MOUS10 WHITE PE FOAM 152L TH.10MM 10MX19MM ROLLS

Layout foam To layout cornices when applying a decorative render (hollow joints, corner chaining, bands) MOUSCALEPINAG RENDER LAYOUT FOAM 60X10MMX15M ROLLS

Polyurethane foam To fix on panels (EPS, etc.) in the context of the PRB Thermopâte Technical notice. Used to fill holes and gaps between EPS panels (fire resistance B1 as per DIN4102) For individual

houses only. Anchoring mandatory for refurbishment.

MOUSSEPU10 ADHESIVE FOAM PU10 EPS 750 ML

PISTOLMOUS ADHESIVE FOAM GUN EPS 500 ML

NETMOUS ADHESIVE FOAM CLEANER EPS 500 ML

PRB Comprimousse impregnated Impregnated foam joint to separate and keep a space between the finish and an element of the building, such as joinery, while contributing additional waterproofing

MOUSCOMPRIB COMPRIMOUSSE IMPREGNATED 12/3 - 7 mm 8 m

MOUSCOMPR3-12 COMPRIMOUSSE IMPREGNATED 15/3 - 12 mm 9 m

Anchor cap Impregnated foam anchor cap to provide a watertight cap on a hole left in an E.W.I. system (External Wall Insulation) by a scaffolding anchor element.

BOUCHANCR SCAFFOLDING ANCHOR CAP (25 U/PAQ)

NEW

ConsumptionPackagingweightColourAdvantagesName & Use

box of 24 rolls

box of 32 rolls

box of 16 rolls

box of 25 rolls

box of 5 rolls

25 U/PAQ

1 PU10 EPS Adhesive foam spray can can cover 5 m², which is as much as a

25 kg bag of mortarbox of 12

Ready-to-use, easy and quick to install Permanent and fast fixing Compensation of levelness faults Very good adherence on most building materials Resists to ageing, heat and water



FRAMES AND FIXINGSProfiles

Aluminium starter profilesFor PRB THERMOLOOK EMI EWI systemTo stop and position insulation panels on lower levels.They are not designed to be fitted with a clip-on drip groove.

PROFDEP40 2.5M X 40 MM ALUMINIUM STARTER PROFILE U PROFDEP60 2.5M X 60 MM ALUMINIUM STARTER PROFILE U PROFDEP80 2.5M X 80 MM ALUMINIUM STARTER PROFILE U PROFDEP100 2.5M X 100 MM ALUMINIUM STARTER PROFILE U PROFDEP120 2.5M X 120 MM ALUMINIUM STARTER PROFILE U PROFDEP140 2.5M X 140 MM ALUMINIUM STARTER PROFILE U PROFDEP160 2.5M X 160 MM ALUMINIUM STARTER PROFILE U PROFDEP170 2.5M X 170 MM ALUMINIUM STARTER PROFILE U PROFDEP180 2.5M X 180 MM ALUMINIUM STARTER PROFILE U PROFDEP200 2.5M X 200 MM ALUMINIUM STARTER PROFILE U

Aluminium starter profiles & clip-on drip groovesAssembly principles

Starter profile

+ Drip groove

= Aluminium profile with drip groove

Aluminium starter profiles designed to be fitted with a clip-on drip grooveTo stop and position insulation panels on lower levels and be fitted with a clip-on drip groove

PROFGOUT30 2.5MX 30MM DRIP GROOVE STARTER PROFILE U PROFGOUT40 2.5MX 40MM DRIP GROOVE STARTER PROFILE U PROFGOUT50 2.5MX 50MM DRIP GROOVE STARTER PROFILE U PROFGOUT60 2.5MX 60MM DRIP GROOVE STARTER PROFILE U PROFGOUT70 2.5MX 70MM DRIP GROOVE STARTER PROFILE U PROFGOUT80 2.5MX 80MM DRIP GROOVE STARTER PROFILE U PROFGOUT90 2.5MX 90MM DRIP GROOVE STARTER PROFILE U PROFGOUT100 2.5MX 100MM DRIP GROOVE STARTER PROFILE U PROFGOUT110 2.5MX 110MM DRIP GROOVE STARTER PROFILE U PROFGOUT120 2.5MX 120MM DRIP GROOVE STARTER PROFILE U PROFGOUT130 2.5MX 130MM DRIP GROOVE STARTER PROFILE U PROFGOUT140 2.5MX 140MM DRIP GROOVE STARTER PROFILE U PROFGOUT150 2.5MX 150MM DRIP GROOVE STARTER PROFILE U PROFGOUT160 2.5MX 160MM DRIP GROOVE STARTER PROFILE U PROFGOUT170 2.5MX 170MM DRIP GROOVE STARTER PROFILE U PROFGOUT180 2.5MX 180MM DRIP GROOVE STARTER PROFILE U PROFGOUT190 2.5MX 190MM DRIP GROOVE STARTER PROFILE U PROFGOUT200 2.5MX 200MM DRIP GROOVE STARTER PROFILE U PROFGOUT210 2.5MX 210MM DRIP GROOVE STARTER PROFILE U PROFGOUT220 2.5MX 220MM DRIP GROOVE STARTER PROFILE U PROFGOUT230 2.5MX 230MM DRIP GROOVE STARTER PROFILE U PROFGOUT240 2.5MX 240MM DRIP GROOVE STARTER PROFILE U PROFGOUT250 2.5MX 250MM DRIP GROOVE STARTER PROFILE U PROFGOUT260 2.5MX 260MM DRIP GROOVE STARTER PROFILE U PROFGOUT270 2.5MX 270MM DRIP GROOVE STARTER PROFILE U PROFGOUT280 2.5MX 280MM DRIP GROOVE STARTER PROFILE U PROFGOUT290 2.5MX 290MM DRIP GROOVE STARTER PROFILE U PROFGOUT300 2.5MX 300MM DRIP GROOVE STARTER PROFILE U

PVC drip grooves to clip onto the aluminium starter profileTo save time and achieve a perfect finishWith frame and render thickness indicator:– 6 mm: TPC / EMI – 10 mm: hydraulic render / EMI – 14 mm: hydraulic render

PROFGOUTRPE 6MM DRIP GROOVE TO CLIP TO 2.5M PROFILE U PROFGOUTHYEMI 10MM DRIP GROOVE TO CLIP TO 2.5M PROFILE U PROFGOUTHYDRO 14MM DRIP GROOVE TO CLIP TO 2.5M PROFILE U

30 mm join for starter profilesProvides the join between 2 aluminium starter profiles. Provides a clean finish. Leave a 3 mm gap for expansion.

JONPROFDEP30 30 MM STARTER PROFILE JOIN PAQ 100

3 mm block for aluminium starter profilesFitted on the anchor, between the starter profile and the substrate to compensate possible gaps.

CALPROFDEP3 3MM STARTER PROFILE BLOCK PAQ100

2 • EWI (excluding insulating materials) continued



FRAMES AND FIXINGS continuedProfiles (continued)

Adjustable width PVC starter profilesComposed of 2 elements

PVC starter profile base

+ PVC drip groove profile

= PVC profile with drip groove

PVC starter profile baseTo stop and position insulation panels on lower levels PROFDEPPVC 2M ADJUSTABLE PVC STARTER PROFILE U

PVC drip groove profileAllows to save time on the installation and achieve a perfect finish. With frame and render thickness indicator: 6 mm for TPC / EMI. First position the PVC starter profile base, then the insulation panel, and finally the PVC drip groove profile. Can also be used separately to separate two finishes between two insulation materials of different thickness, for example between a facade and a basement.

PROFDEPVC100 PVC STARTER PROF EPS 100TO160MM DRIP 6MM 2M U PROFDEPVC120 PVC STARTER PROF EPS 120TO180MM DRIP 6MM 2M U PROFDEPVCH120 PVC STARTER PROF EPS 120TO180MM DRIP 14MM 2M U

Side stopper profiles for EWIFor side stops for vertical outer corners

PROFLATE2530 2.5 M x 30 MM LATERAL ALU PROFILE U PROFLATE2540 2.5 M x 40 MM LATERAL ALU PROFILE U PROFLATE2550 2.5 M x 50 MM LATERAL ALU PROFILE U PROFLATE2560 2.5 M x 60 MM LATERAL ALU PROFILE U PROFLATE2570 2.5 M x 70 MM LATERAL ALU PROFILE U PROFLATE2580 2.5 M x 80 MM LATERAL ALU PROFILE U PROFLATE2590 2.5 M x 90 MM LATERAL ALU PROFILE U PROFLATE25100 2.5 M x 100 MM LATERAL ALU PROFILE U PROFLATE25110 2.5 M x 110 MM LATERAL ALU PROFILE U PROFLATE25120 2.5 M x 120 MM LATERAL ALU PROFILE U PROFLATE25130 2.5 M x 130 MM LATERAL ALU PROFILE U PROFLATE25140 2.5 M x 140 MM LATERAL ALU PROFILE U PROFLATE25150 2.5 M x 150 MM LATERAL ALU PROFILE U PROFLATE25160 2.5 M x 160 MM LATERAL ALU PROFILE U PROFLATE25170 2.5 M x 170 MM LATERAL ALU PROFILE U PROFLATE25180 2.5 M x 180 MM LATERAL ALU PROFILE U PROFLATE25190 2.5 M x 190 MM LATERAL ALU PROFILE U PROFLATE25200 2.5 M x 200 MM LATERAL ALU PROFILE U PROFLATE25210 2.5 M x 210 MM LATERAL ALU PROFILE U PROFLATE25220 2.5 M x 220 MM LATERAL ALU PROFILE U PROFLATE25230 2.5 M x 230 MM LATERAL ALU PROFILE U PROFLATE25240 2.5 M x 240 MM LATERAL ALU PROFILE U PROFLATE25250 2.5 M x 250 MM LATERAL ALU PROFILE U PROFLATE25260 2.5 M x 260 MM LATERAL ALU PROFILE U PROFLATE25270 2.5 M x 270 MM LATERAL ALU PROFILE U PROFLATE25280 2.5 M x 280 MM LATERAL ALU PROFILE U PROFLATE25290 2.5 M x 290 MM LATERAL ALU PROFILE U PROFLATE25300 2.5 M x 300 MM LATERAL ALU PROFILE U PROFLATE30180 3 M x 180 MM LATERAL ALU PROFILE U

High crown profiles for EWI For high EWI stops (gable top without overlap, underside of overlapping window sill, continuation under existing overlapping acroterion coping to be maintained)

PROFCOUR2530 2.5M x 30 MM ALU CROWN PROFILE U PROFCOUR2540 2.5M x 40 MM ALU CROWN PROFILE U PROFCOUR2550 2.5M x 50 MM ALU CROWN PROFILE U PROFCOUR2560 2.5M x 60 MM ALU CROWN PROFILE U PROFCOUR2570 2.5M x 70 MM ALU CROWN PROFILE U PROFCOUR2580 2.5M x 80 MM ALU CROWN PROFILE U PROFCOUR2590 2.5M x 90 MM ALU CROWN PROFILE U PROFCOUR25100 2.5M x 100 MM ALU CROWN PROFILE U PROFCOUR25110 2.5M x 110 MM ALU CROWN PROFILE U PROFCOUR25120 2.5M x 120 MM ALU CROWN PROFILE U PROFCOUR25130 2.5M x 130 MM ALU CROWN PROFILE U PROFCOUR25140 2.5M x 140 MM ALU CROWN PROFILE U PROFCOUR25150 2.5M x 150 MM ALU CROWN PROFILE U PROFCOUR25160 2.5M x 160 MM ALU CROWN PROFILE U PROFCOUR25170 2.5M x 170 MM ALU CROWN PROFILE U PROFCOUR25180 2.5M x 180 MM ALU CROWN PROFILE U PROFCOUR25190 2.5M x 190 MM ALU CROWN PROFILE U PROFCOUR25200 2.5M x 200 MM ALU CROWN PROFILE U PROFCOUR25210 2.5M x 210 MM ALU CROWN PROFILE U PROFCOUR25220 2.5M x 220 MM ALU CROWN PROFILE U PROFCOUR25230 2.5M x 230 MM ALU CROWN PROFILE U PROFCOUR25240 2.5M x 240 MM ALU CROWN PROFILE U PROFCOUR25250 2.5M x 250 MM ALU CROWN PROFILE U PROFCOUR25260 2.5M x 260 MM ALU CROWN PROFILE U PROFCOUR25270 2.5M x 270 MM ALU CROWN PROFILE U PROFCOUR25280 2.5M x 280 MM ALU CROWN PROFILE U PROFCOUR25290 2.5M x 290 MM ALU CROWN PROFILE U PROFCOUR25300 2.5M x 300 MM ALU CROWN PROFILE U





Open V beadsFor PRB THERMOLOOK EMI EWI system THERMOLOOK / FONDISOL F render finishBAVDBE/7-9 OPEN V BEAD- 7/9 BEIGE STRIP -3M U Pack of 15 u

BAVDBL/7-9 OPEN V BEAD- 7/9 WHITE STRIP -3M U Pack of 15 u For PRB THERMOLOOK GF/GM EWI systemBAVDBE OPEN V BEAD- -12/15 BEIGE STRIP -3M U Pack of 15 u

BAVDBL OPEN V BEAD- -12/15 WHITE STRIP -3M U Pack of 15 u

BAVDSJ OPEN V BEAD WITHOUT STRIP -3M U Pack of 15 u Perforated V beadsFor PRB THERMOLOOK EMI EWI systemBAVPSJ PERFORATED V BEAD WITHOUT STRIP -3M U Pack of 15 u

BAVRPE V BEAD FOR TPC EWI SYSTEM 2.5M Pack of 15 u

Meshed corner beadsFor PRB THERMOLOOK EMI EWI systemCORNALUTOIL23 2.5M MESHED ALU CORNER BEAD 10 X 23 U Pack of 50 u CORNPVCTOIL23 2.5M MESHED PVC CORNER BEAD 10 X 23 U Pack of 50 u CORNPVCTOIL30 2.5M MESHED PVC CORNER BEAD 10 X 30 U Pack of 50 u Meshed corner beads with 6 mm finishing indicator CORNPVCJONC3 MESHED PVC CORN BEAD 10X15 STRIP 3MM 2.5M 37521 CORNPVCJONC6 MESHED PVC CORN BEAD 10X15 STRIP 6MM 2.5M Pack of 50 uCORNPVCJONC10 MESHED PVC CORN BEAD 10X15 STRIP 10MM 2.5M Pack of 25 u CORNPVCANGVA MESHED PVC CORN BEAD VARIABLE ANGLE 50M 3752

Meshed corner beads for lintels with drip groovePrevent returns and water drips under lintels, beams, etc.Respect the installation direction, with the render marker towards the outside.– 6 mm: TPC, EMI finish– 10 mm: hydraulic, EMI finish– 14 mm: hydraulic finish

CORNPVCGOUT6 LINTEL DRIP CORNER BEAD 6MM 2.5M MESHED U Pack of 10 u

CORNPVCGOUT10 LINTEL DRIP CORNER BEAD 10MM 2.5M MESHED U Pack of 10 u CORNPVCGOUT14 LINTEL DRIP CORNER BEAD 14MM 2.5M MESHED U Pack of 10 u

Render stop profile with framePROFARRPVC6 RENDER STOP PROF 6 MM + FRAME 2.5 M Pack of 50 u

PROFARRPVC11 RENDER STOP PROF 11 MM + FRAME 2.5 M Pack of 50 u

Expansion beadsFor PRB THERMOLOOK GF/GM EWI systemAllow a movement of +/-3mm between 2 buildings- open metal side parts- central strip in beige or white PVC

BADILBE EXPANSION BEAD -BEIGE STRIP -3M U Box of 10 u BADILBL EXPANSION BEAD -WHITE STRIP -3M U Box of 10 u Expansion joint coversFor PRB THERMOLOOK EMI EWI systemAllow a +/-5mm expansion movement between 2 buildings spaced from 20 to 35mmSide frames. White PVC central membrane. Flat or 90° angle

BADILPVCE5 FLAT PVC MESHED EXP JOINT COVER 2.5M U Pack of 25 u BADILPVCL5 ANGLED PVC MESHED EXP JOINT COVER 2.5M U Pack of 25 u

Separating beadsFor PRB THERMOLOOK EMI EWI systemAllow a movement of +/-1mm between 2 parts of a buildingWhite PVC central membrane. For TPC, EMI thickness 6 mm

BAFRAPVCE1 FLAT MESHED PVC SEP BEAD 2.75M U Pack of 10 u




AnchorsHammer-in anchors Ø 6 x 40 mmTo fix starter profiles, low rails, side profiles or crowns. Fix at 5 cm from the ends and every 30 cm.

CHEV6/40 6/40 HAMMER-IN ANCHORS BOX OF 200

PRB hydro+ insulation anchors (metal nail)Hammer-in expansion anchors to fix insulation panels Certified for A B C class materials

CHEVHYDRO+60 HYDRO + ANCHOR Ø8 MM INSUL 60 -BTE 200 - 95 MM BOX OF 200 CHEVHYDRO+80 HYDRO + ANCHOR Ø8 MM INSUL 80 -BTE 200 - 115 MM BOX OF 200 CHEVHYDRO+100 HYDRO + ANCHOR Ø8 MM INSUL 100 -BTE 200 - 135 MM BOX OF 200 CHEVHYDRO+120 HYDRO + ANCHOR Ø8 MM INSUL 120 -BTE 200 - 155 MM BOX OF 200 CHEVHYDRO+140 HYDRO + ANCHOR Ø8 MM INSUL 140 -BTE 200 - 175 MM BOX OF 200

CHEVHYDRO+160 HYDRO + ANCHOR Ø8 MM INSUL 160 -BTE 200 - 195 MM BOX OF 200 CHEVHYDRO+180 HYDRO + ANCHOR Ø8 MM INSUL 180 -BTE 100 - 215 MM BOX OF 100 CHEVHYDRO+200 HYDRO + ANCHOR Ø8 MM INSUL 200 -BTE 100 - 235 MM BOX OF 100

CHEVHYDRO+220 HYDRO + ANCHOR Ø8 MM INSUL 220 -BTE 100 - 255 MM BOX OF 100 CHEVHYDRO+240 HYDRO + ANCHOR Ø8 MM INSUL 240 -BTE 100 - 275 MM BOX OF 100 CHEVHYDRO+260 HYDRO + ANCHOR Ø8 MM INSUL 260 -BTE 100 - 295 MM BOX OF 100

PRB hydro insulation anchors (metal nail)Hammer-in expansion anchors to fix insulation panels Certified for class B C D E materials (except concrete A)

CHEVHYDRO60 HYDRO-INSULATION ANCHORS 60(BOX 250) - 120 MM BOX OF 250

(length 120mm for 60mm insulation) CHEVHYDRO80 HYDRO-INSULATION ANCHORS 80(BOX 250) - 140 MM

BOX OF 250


BOX OF 250


BOX OF 250


BOX OF 250


BOX OF 250


BOX OF 200


BOX OF 200

(length 300mm for 240mm insulation) CHEV300 HYDRO-INSULATION ANCHORS 300(BOX 200) - 360 MM

BOX OF 200

(length 360mm for 300mm insulation) PRB TPC insulation anchors (plastic nail)Hammer-in expansion anchors to fix insulation panelsCertified for A B C D class materials

CHEVRPE60 TPC -INSULATION ANCHORS 60 (BOX 250) - 90 MM (length 90mm for 60mm insulation) BOX OF 250 CHEVRPE80 TPC -INSULATION ANCHORS 80 (BOX 250) - 120 MM (length 120mm for 80mm insulation) BOX OF 250 CHEVRPE100 TPC -INSULATION ANCHORS 100 (BOX 250) - 140 MM (length 140mm for 100mm insulation) BOX OF 250 CHEVRPE120 TPC -INSULATION ANCHORS 120 (BOX 250) - 160 MM (length 160mm for 120mm insulation) BOX OF 250 CHEVRPE140 TPC -INSULATION ANCHORS 140 (BOX 250) - 180 MM (length 180mm for 140mm insulation) BOX OF 250 CHEVRPE160 TPC -INSULATION ANCHORS 160 (BOX 250) - 200 MM (length 200mm for 160mm insulation) BOX OF 250 CHEVRPE180 TPC -INSULATION ANCHORS 180 (BOX 250) - 220 MM (length 220mm for 180mm insulation) BOX OF 250 For insulation thickness in excess of 180, use hydro (+ metal nail) anchors or screw-in anchors

Joinery connection profilesUsed to separate the covering from the joinery.With breakable adhesive strip for temporary protection of the frame when installing and flexible sealing flap.– 9 mm: for TPC– 13 mm: for render

PROFHUIS6 PVC JOINERY PROFILE 6MM+FRAME 2.6M Pack 50 U PROFHUIS9 PVC JOINERY PROFILE 9MM+FRAME 2.6M Pack 50 U PROFHUIS12 JOINERY PROF. 12MM PVC+FRAME 2.6M Pack of 40 U

PVC Flashing support profile / metal covered connection

PROFSOLPVC6 FLASHING SUPPORT PROF 6 MM + FRAME 2.5ML 3749 U

NEW




FRAMES AND FIXINGS continuedAnchors (continued)

PRB wood insulation screwsWood screws to fix insulation panels onto timber or thin sheet metal substrates up to 0.75 mm thick.With insulating washer Assembly using the installation tool sold separately.Flush assembly using the cap delivered with the anchor.

CHEVBOIS40 WOOD-INSUL40 ANCHOR (BOX100)-80MM BOX 100 CHEVBOIS60 WOOD-INSUL60 ANCHOR (BOX100)-100MM BOX 100 CHEVBOIS80 WOOD-INSUL80 ANCHOR (BOX100)-120MM BOX 100 CHEVBOIS100 WOOD-INSUL100 ANCHOR (BOX100)-140MM BOX 100 CHEVBOIS120 WOOD-INSUL120 ANCHOR (BOX100)-160MM BOX 100 CHEVBOIS140 WOOD-INSUL140 (ANCHOR (BOX100)-180MM BOX 100 CHEVBOIS160 WOOD-INSUL160 ANCHOR (BOX100)-200MM BOX 100 CHEVBOIS180 WOOD-INSUL180 ANCHOR (BOX100)-220MM BOX 100 CHEVBOIS200 WOOD-INSUL200 ANCHOR (BOX100)-240MM BOX 100

CHEVBOIS240 WOOD-INSUL240 ANCHOR (BOX100)-280MM BOX 100 PRB screw-in insulation anchorsScrew-in anchors to fix insulation panelsCertified for all classes of materialsEmbedded assembly using the installation tool sold separatelyFlush assembly using the EPS cap sold separatelyMin 65 mm anchoring for category E substrate (cellular concrete)Min 25 mm anchoring for A, B, C and D category substratesEmbedded assembly is not suitable for the ECOROCK rockwool system; see technical sheet

CHEVIS80 SCREW-IN-INSUL ANCHORS 80 (BOX 100) - 115 MM BOX 100

Length 115mm for 80mm insulation CHEVIS100 SCREW-IN-INSUL ANCHORS 100 (BOX 100) - 135 MM

BOX 100

Length 135mm for 100mm insulation

























CHEVISBOUPSE EPS CAP FOR SCREW-IN ANCHOR (BOX 500) BOX 500

CHEVISRONPSEB EPS WASHER FOR SCREW-IN ANCHOR (BOX 100) BOX 100

CHEVISOUTIL SPECIAL EMBEDDED ASSEM. TOOL FOR SCREW-IN ANCHOR KIT U

PRB ÉCOTWIST screw-in anchors for insulationScrew-in anchors to fix insulation panels. Certified for all classes of materials.Embedded assembly: a single anchor whatever the insulation thickness from 120 to 400 mm.Min. 65 mm anchoring.

CHEVECOTWIST ECOTWIST ANCHOR -120 TO 400 MM- BOX 100 BOX 100 CHEVECOOUT260 ECOTWIST TOOL 120-260 MM U CHEVECOOUT400 ECOTWIST TOOL 120-400 MM U

Screw-in anchors External facades

Universal screw-in anchors External facades

Does not alter the insulation shape (deep embedded assembly) Reduces the risks of shadowing on the render A single anchor for 120 to 400 mm insulation Quick and easy to install Thermal bridges eliminated Approved for all substrate materials (A B C D E)



FRAMES AND FIXINGS continuedReinforcements

AVN Glass cloth (Normal glass reinforcement) 1For PRB THERMOLOOK EMI EWI systemTo be fixed in the 1st layer of PRB FONDISOL F. With overlap markings Rolls ofTDAVN100 TDV PRB AVN 100 (4X4)- 1X50M CERTIFIED 1 x 50 m

4x4 hollow joint glass cloth box of 10 U

AVR Glass cloth (Strengthened glass reinforcement) 2For PRB THERMOLOOK EMI EWI systemTo be fixed in the 1st layer of PRB FONDISOL F to strengthen against shocks before installing the AVN cloth Rolls ofTDARS208 TDV PRB AVR 4X4 EN 1.00X25M N-CERTIF 1 x 25 m

Metal mesh Pour PRB THERMOLOOK GF/GM EWI systemTo staple to the EPS Roll ofTREILMET MESH-TMSG-MESH SIZE12.5 0.65 ROU 25X1M ROLLS 1 x 25 m Staples for metal meshFor PRB THERMOLOOK GF/GM EWI systemTo fix the metal mesh 40 mm long (density 20 to 25 staples/m²) Box ofAGRAF40 BOX 40 MM GALVA RESIN STAPLES- 1700 U 1,700 U

AVE Glass cloth (Coated glass reinforcement) For PRB THERMOLOOK GF/GM EWI systemTo be fixed in the 1st layer of PRB THERMOLOOK render Rolls ofTDAVE100 TDV PRB 1X50ML AVE 100 (10X10)-CERTIFIED 1 x 50 m

Rolls ofTDAVE33 TDV PRB AVE33 10X10)- 0.33MX50M CERTIFIED 0.33 x 50 m

Inner corner glass cloth squareFor PRB THERMOLOOK EMI and PRB THERMOROCHE EWI systemPreformed glass cloth square to reinforce an inner window corner. Sold TDMOUCHANGREN GLASS CLOTH 4x4 INNER CORNER SQUARE BOX 25 U per box

Insulating fixings (accessories)

Adhesive for insulating fixing accessoriesDOSCOLSTPOLY ADHESIVE DOSTEBA ST POLYMER 290 M

Fixing patchØ90 mm fixing patch with hole saw, working fixing Ø 70 mm

To fix guiding rails for blinds and rolling shutters, lightweight panels (entry panels),

external temperature sensors, pipe clamps, wall-mounted lighting.

Glue using PU adhesive. Allows later assembly without a thermal bridge

for EPS or rockwool EWI systems.

DOSDORONPE DO RONDO PE-FIXING PATCH-20 UNITS Pack

with the drilling tool of 20 U

Spiral anchor DOSCHEVSPI To fix lightweight elements on facades Pack

of 20 U

Electric box supportAllows the assembly of electric connectors and power sockets without a thermal bridge

in EWI systems, using wood or sheet metal screws. Fire resistant PA. interior Ø 65 mm

exterior Ø 105 mm - Depth 65 mm. Glue using PU adhesive

DOSSUPBTEELEC ELECTRIC BOX SUPPORT ELDOLIN - 10 UNITS 10 U

DOSSUPBTEFRAI Ø68 DRILL FOR ELECTRIC BOX ELDOLIN U

Reinforcement External facades



Strengthened glass reinforcement External facades PRB THERMOLOOK EMI

1.10 m2/m2

1.10 m2/m2

1.10 m2/m2

1.00 m2/m2




FRAMES AND FIXINGS continuedInsulating fixings (accessories continued)

White EPS assembly cylindersEPS density 170 kg/m3

To fix hooks, drainpipe collars, shutter stops, roller blind boxes.Allows future installation without thermal bridges in EPS or rockwool EWI systems.Screwing possible using wood or sheet metal screws, or frame screws with large cylindrical threading.Cylinder fixed using PU adhesive.DOSZYR70 ZYRILLO-ASSEMBLY CYLINDER Ø70-PQT 10

Pack of 10 U

(th. 70mm working fixing Ø50mm) with drilling tool and tube of PU adhesiveDOSZYR70SF WITHOUT DRILL ZYRILO-ASSEMBLY CYL Ø70-PQT10

Pack of 10 U

without drilling tool / with tube of PU adhesiveDOSZYR70SF/50 WITHOUT DRILL ZYRILO-ASSEMBLY CYL Ø70-PQT50

Pack of 50 U

without drilling tool / with 4 tubes of PU adhesiveDOSZYR125 ZYRILLO-ASSEMBLY CYLINDER Ø125-PQT 10 Pack of 10 U

(th. 70mm working fixing Ø105mm) with drilling tool and tube of PU adhesive

Same use as the previous cylinders, but 1 m long with pre-cuts, to cut to the required length. Can also be used as a compression block. DOSVARIZ90 VARIZ EPS ASSEMBLY CYLINDER Ø 90 - 1 M DOSVARIZ125 VARIZ EPS ASSEMBLY CYLINDER Ø 125 - 1 M Black PU assembly cylindersPU density 300 kg/m3. Same uses as the EPS cylinder but stronger.Can also be used to fix advertising, lighting.Can also be used as support blocks for high compression loads.Must be anchored in the substrate. Glue using PU adhesive.Ø 90 mm: working fixing Ø 50 mm. Ø 125 mm: working fixing Ø 85 mmDOSDRIN9060 DO RONDELINE PU-ASS. CYLINDER Ø90-60MM (without drilling tool) UDOSDRIN9080 DO RONDELINE PU-ASS. CYLINDER Ø90-80MM (without drilling tool) UDOSDRIN90100 DO RONDELINE PU-ASS. CYLINDER Ø90-100MM (without drilling tool) UDOSDRIN90120 DO RONDELINE PU-ASS. CYLINDER Ø90-120MM (without drilling tool) UDOSDRIN90140 DO RONDELINE PU-ASS. CYLINDER Ø90-140MM (without drilling tool) UDOSDRIN90160 DO RONDELINE PU-ASS. CYLINDER Ø90-160MM (without drilling tool) UDOSDRIN90180 DO RONDELINE PU-ASS. CYLINDER Ø90-180MM (without drilling tool) UDOSDRIN90200 DO RONDELINE PU-ASS. CYLINDER Ø90-200MM (without drilling tool) U

DOSDRIN12560 DO RONDELINE PU-ASS. CYLINDER Ø125-60MM (without drilling tool) UDOSDRIN12580 DO RONDELINE PU-ASS. CYLINDER Ø125-80MM (without drilling tool) UDOSDRIN125100 DO RONDELINE PU-ASS. CYLINDER Ø125-100MM (without drilling tool) UDOSDRIN125120 DO RONDELINE PU-ASS. CYLINDER Ø125-120MM (without drilling tool) UDOSDRIN125140 DO RONDELINE PU-ASS. CYLINDER Ø125-140MM (without drilling tool) UDOSDRIN125160 DO RONDELINE PU-ASS. CYLINDER Ø125-160MM (without drilling tool) UDOSDRIN125260 DO RONDELINE PU-ASS. CYLINDER Ø125-260MM (without drilling tool U

Drilling tools for assembly cylinders

DOSZYR70FRAIS DRILLØ70 FOR ZYRILLO-ASS. CYLINDER U

DOSDOROFRAISE DRILL Ø90 POUR DO RONDO PE U

DOSZYR125FRAI DRILL Ø125 POUR ZYRILLO-ASS. CYLINDER U Drilling case for assembly cylindersContaining:- 1 case- 1 long shaft for drilling depths up to 200mm- 1 shaft extension for drilling depths up to 340mm- 1 adjusting ring with male wrench- 1 drill guiding bell- 2 Ø70mm removable toothed disks- 2 Ø90mm removable toothed disks- 2 Ø125mm removable toothed disks

DOSCOFFRAISE DRILLING CASE FOR ASSEMBLY CYLINDERS U

PU assembly blocksTo fix eaves, emergency exit stairs, awnings, canopiesAllow future installation without thermal bridges in EPS or rockwool EWI systems.Black PU foam. Steel base plate, for proper adherence to the substrate

Aluminium plate to screw the elementsResin plate to optimize pressure distribution over the surface of the elementDelivered with EPS caps to cover the screw holes Rectangular 240 x 138 mm working surface area 162 x 80 mm with 4 M10 x 130 rods and Ø18 x 85 mm concrete bushings DOSUALUBET80 UMP ALU TRI-CONCRETE ASSEMBLY BLOCK REC-80MM U with 4 rods and concrete bushingsDOSUALUBET100 UMP ALU TRI-CONCRETE ASSEMBLY BLOCK REC-100MM U with 4 rods and concrete bushingsDOSUALUBET120 UMP ALU TRI-CONCRETE ASSEMBLY BLOCK REC-120MM U with 4 rods and concrete bushingsDOSUALUBET140 UMP ALU TRI-CONCRETE ASSEMBLY BLOCK REC-140MM U with 4 rods and concrete bushingsDOSUALUBET160 UMP ALU TRI-CONCRETE ASSEMBLY BLOCK REC-160MM U with 4 rods and concrete bushingsDOSUALUBET200 UMP ALU TRI-CONCRETE ASSEMBLY BLOCK REC-200MM U with 4 rods and concrete bushings



FRAMES AND FIXINGS continued Insulating fixings (accessories continued)

PU assembly blocks Rectangular 240 x 138 mm working surface area 162 x 80 mm with 4 Ø14 x 140 mm torx head anchors, min. anchorage 70 mm

DOSUALUTRI80 UMP ALU TRI-RECT ASSEMBLY PLATE PU-80MM U with 4 anchorsDOSUALUTRI100 UMP ALU TRI-RECT ASSEMBLY PANEL PU-100MM U with 4 anchorsDOSUALUTRI120 UMP ALU TRI-RECT ASSEMBLY PANEL PU-120MM U with 4 anchorsDOSUALUTRI140 UMP ALU TRI-RECT ASSEMBLY PANEL PU-140MM U with 4 anchorsDOSUALUTRI160 UMP ALU TRI-RECT ASSEMBLY PANEL PU-160MM U with 4 anchorsDOSUALUTRI180 UMP ALU TRI-RECT ASSEMBLY PANEL PU-180MM U with 4 anchorsDOSUALUTRI200 UMP ALU TRI-RECT ASSEMBLY PANEL PU-200MM U with 4 anchorsDOSUALUTRI260 UMP ALU TRI-RECT ASSEMBLY PANEL PU-260MM U with 4 anchors Cylindrical Ø125 mm working surface area 75 x 60 mm with 2 Ø10 x 135 mm torx head anchors, min. anchorage 70 mm DOSUALUZ80 UMP ALU Z-CYLIN ASSEMBLY PANEL PU-80MM U with 2 anchorsDOSUALUZ100 UMP ALU Z-CYLIN ASSEMBLY PANEL PU-100MM U with 2 anchorsDOSUALUZ120 UMP ALU Z-CYLIN ASSEMBLY PANEL PU-120MM U with 2 anchorsDOSUALUZ140 UMP ALU Z-CYLIN ASSEMBLY PANEL PU-140MM U with 2 anchorsDOSUALUZ160 UMP ALU Z-CYLIN ASSEMBLY PANEL PU-160MM U with 2 anchorsDOSUALUZ200 UMP ALU Z-CYLIN ASSEMBLY PANEL PU-200MM U with 2 anchors

EPS Cutting toolTool to cut EPS, max. thickness 30 cm.Without the options below.

DOS212GSLCOUP EPS CUTTING TOOL 212GSL-30 + CASE U

DOS212GSLANG CORNER CUTTER 212GSL-30 + CASE U

DOS212GSLPIED REAR LEG 212GSL-30 U

DOS212GSLECHA SCAFFOLDING FIXING 212GSL-30 U DOS212GSLRAIL LEFT RAIL SUPPORT 212GSL-30 U

DOSFILSPEWE CUTTING TOOL SPARE WIRE 20M U

DOSFILANGLE SPARE WIRE FOR CORNER 6M U

Assembly panelsEPS density 170 kg/m3

Allow future installation without thermal bridges in EPS or rockwool EWI systems.Can also be used as supporting blocks for medium loads.Screwing possible using wood or sheet metal screws, or frame screws with large cylindrical threading. Glue using PU adhesive.

DOSCARQUA80 ASSEMBLY PANEL QUADROLIN100x100 EPS 80MM UDOSCARQUA100 ASSEMBLY PANEL QUADROLIN100x100 EPS 100MM UDOSCARQUA120 ASSEMBLY PANEL QUADROLIN100x100 EPS 120MM UDOSCARQUA140 ASSEMBLY PANEL QUADROLIN100x100 EPS 140MM UDOSCARQUA160 ASSEMBLY PANEL QUADROLIN100x100 EPS 160MM U

Elements to fix guard railsTo fix guard rails on windows, balconies and at the corners of buildings.Allow future installation without thermal bridges in EPS or rockwool EWI systems.Black PU foam reinforced with 2 resin plates.Delivered with 3 Ø8 x 100 anchors min. anchorage 70 mm torx head. Metal plate to drill and then tap.

Surface area to glue 280 x 112 mm.Working surface area 84 x 45 mm. DOSTRAWPH80 TRAWIK PH- PU BRACKET - 80MM U with 3 d8x100 anchorsDOSTRAWPH100 TRAWIK PH- PU BRACKET - 100MM U with 3 d8x100 anchorsDOSTRAWPH120 TRAWIK PH- PU BRACKET - 120MM U with 3 d8x100 anchorsDOSTRAWPH140 TRAWIK PH- PU BRACKET - 140MM U with 3 d8x100 anchorsDOSTRAWPH160 TRAWIK PH- PU BRACKET - 160MM U with 3 d8x100 anchors




FRAMES AND FIXINGS continuedInsulating fixings (accessories continued)

Hinge bodies to fix, shutter stops and fasteners- Used to install a shutter hinge offset from the thickness of the insulation- The existing hinge makes it possible to keep the spacing- The fixing is re-created using 2 anchors for sufficient strength– Receives a self-blocking EWI hinge pin Ø 12-25, Ø 14-25 or Ø 16-25- For 60 to 160 mm insulation- Black cataphoresis finish

PACK OF 8

GONDITECORP25 HINGE BODY INSU EWI Ø25 - PACK OF 8 with 8 pins

d14-25

Hammers into the hinge body to lock, to adapt to the shutter diameterBlack cataphoresis finish

GONDITECLA12 SELF-LOCKING PIN Ø12-25 PACK OF 4 PACK OF 4

GONDITECLA14 SELF-LOCKING PIN Ø14-25 PACK OF 4 PACK OF 4 GONDITECLA16 SELF-LOCKING PIN Ø16-25 PACK OF 4 PACK OF 4 Delivered with 1 anchor and 1 adjustable stop. Black cataphoresis finish.

– Stop L. 320 mm – Stop L. 380 mm– Anchor L. 240 mm – Anchor L. 300 mm– For 160 mm insulation in solid material – For 220 mm insulation in solid material– For 120 mm insulation in hollow material – For 180 mm insulation in hollow material– Drill hole Ø 12 mm – Drill hole Ø 16 mm

GONDITEARR120 SHUTTER STOP 120-160 MM MAX-PACK OF 12 PAQ PACK OF 12

GONDITEARR180 SHUTTER STOP 180-220 MM MAX-PACK OF 12 PAQ PACK OF 12

Hinge fixing elementsTo fix hinges for shutters, guiding rails for roller shutters.Allow future installation without thermal bridges in EPS or rockwool EWI systems.Black PU foam reinforced with 2 resin plates.Delivered with 3 Ø 8 x 100 anchors min. anchorage 70 mm torx head. Metal plate to be drilled then tapped.Surface area to fix 280 x 125 mm, working surface area 105 x 45 mm.

DOSK1PH80 K1 PH- HINGE FIXING ELEMENT- 80MM U with 3 d8x100 anchorsDOSK1PH100 K1 PH- HINGE FIXING ELEMENT- 100MM U with 3 d8x100 anchorsDOSK1PH120 K1 PH- HINGE FIXING ELEMENT- 120MM U with 3 d8x100 anchorsDOSK1PH140 K1 PH- HINGE FIXING ELEMENT- 140MM U with 3 d8x100 anchorsDOSK1PH160 K1 PH- HINGE FIXING ELEMENT- 160MM U with 3 d8x100 anchorsDOSK1PH180 K1 PH- HINGE FIXING ELEMENT- 180MM U with 3 d8x100 anchorsDOSK1PH200 K1 PH- HINGE FIXING ELEMENT- 200MM U with 3 d8x100 anchorsDOSK1PH300 K1 PH- HINGE FIXING ELEMENT- 300MM U with 3 d8x100 anchors

Screws onto the shutter hinge fixing bracket (drill then tap the bracket’s metal plate to M10)

DOSKGOND SCREW-ON HINGE Ø 14 MM M10X80MM U

Is fitted to the shutter to guide the drilling of the shutter hinge fixing bracket

DOSKGABARIT DRILL GUIDE FOR SCREW-ON HINGE Ø14MM U

Fits on a Ø 14mm hinge to obtain a Ø 16mm hinge

DOSKADAPTATEU Ø 14 MM SHEATH AND WASHER FOR 16 MM U

Screws into a white EPS assembly cylinder

DOSKARRET SCREW-IN SHUTTER STOP U

Fixes to the window sill

DOSKTAQUET BLACK SHUTTER FASTENER U

Case of insulating fixing accessory samplesCase containing samples of insulation fixing elements for structures fitted over EWI Composed of: fixing patch, assembly cylinders, assembly plates, hinges, anchors, etc.

DOSVALISEECH SAMPLE CASE U

Screw-in anchors External facades




FRAMES AND FIXINGS continuedOther accessories (continued)

3 • FLOOR PREPARATION

FINISH Thick render

36 col.(PRB

pastel colours)

25 kg

11 to 15 kg/m2

for 7 10 mm

thickness

Orange+

clear

Component A resin: 3.150 kg

+ Component B hardener:1.850 kg

300 to 800 g/m²

depending on use

25 kg3.5 to

4 kg/m²

Grey

1 kg

Grey

1 kg

5 kg

0.8 to 1 kg/m²

for one coat depending on the structure

5 kg

0.6 kg/m² per coaton walls

Greytub5 kg

0.2 to 0.3 kg/m²

for one coat

PRB THERMOLOOK GMType LW Class CS IHydraulic render for E.W.I. finish.Medium grading.

PRB THERMOLOOK GFType LW Class CS IHydraulic render for E.W.I. finish. Fine grading.

PRB ACCROSOL TECHNICTwin-componentWaterproofing and surface consolidation primer.

SABLE SEC ACCROSOL TECHNICGrading from 0.7 to 1.3 mmFor the adhesive sanding of the 2nd layer of PRB ACCROSOL TECHNIC

PRB POLYDIANE +Liquid polyurethane sealing system.

PRB POLYDIANE + THIXO

POLYDIANE ARM. TAPE

PRB SINSOL 10 RHigh adherence epoxy primer

SEALING - WATERPROOFING - RESINSPrimers

Systems

EWI Reinforcement panelsTo reinforce the junction between the rolling shutter box and the insulation panel, in order to prevent the finish from cracking. Fibre-cement panels, also used as a fire barrier (fire reaction class A2-s1-d0). Glue and anchored fixing: see technical sheet

PLAQRENFCIM FIBRE CEMENT REINFORCEMENT PANEL 1250X2500X10 U

U profile for panels

PROFUPLAQ U PROF FOR PANELS TH.10-12.5 + FRAME 2. M U

Thick finishing render (new, existing, Timber frame) Thermolook GF/GM, Thermolook EMI, Thermoroche, Thermobois Mechanical application Finishes: Scratched, Rustic, Flattened rustic Possibility of creating a pattern and/or imitation stones on EWI PRB THERMOLOOK GF (contact us)

Allows adherence to the Polydiane + sealing Twin-component mixture usable for 4 h Floor paint directly on concrete: SINSOL 10 R + ISOPLAST 2301 S / SRC

Moisture barrier Very high adherence > 3 MPa, increases hardness All new and special substrates Solvent free Concrete floor protection compliant with DTUs

High performance, solvent free liquid sealing Walkable and wear resistant Suitable for plain, mountain and tropical climates

High performance, solvent free liquid sealing Walkable and wear resistant Suitable for plain, mountain and tropical climates

External Wall Insulation Fire barrier reinforcements Roller shutter box



3 • FLOOR PREPARATION continued

Grey 25 kg1.5 kg/m2/mm

of thickness

PRB PLANIDUR PROP3 premisesSelf-levelling render.


of thickness

PRB PLANIDURP3 premisesHigh-performance self-levelling render


of thickness

PRB PLANIDUR HPP3 premisesHigh-performance self-levelling render


of thickness

PRB PLANISPIDP3 R premisesQuick-drying self-levelling render.


of thickness

PRB PLANIDUR PLUSP3 premisesExterior self-levelling render.

SEALING - WATERPROOFING - RESINS (continued)Coverings

PRIMERS FOR FLOOR RENDERS AND ADHESIVE MORTARS

FLOOR LEVELLING AND SMOOTHINGImproved

White

Greenish

Milky white

15 kg

Tank1000 l

15 kg

5 l

150 to 300 g/m2 de-

pending on the substrate

(porosity, roughness)

100 to 300 g/m2

depending on the substrate

1 to 2 l 25 kg bags

PRB ACCROSOL PLUSAll purpose adhesive primer.

PRB ACCROSOL AGAll purpose dripless adhesive primer.

PRB PLASTIFIERAdditive for floor renders, adhesive mortars and ce-ment grouts.

PRB ISOPLAST 2301 SFlexible, anti u.v. polyurethane paint.

15 colourstub of5 kg

150 to 200 g/m² on a smooth substrate

(SEL*, paint)

250 to 300 g/m² on SEL* sanded using 0.2/0.5 mm sands

350 to 400 g/m² on SEL* sanded using 0.4/0.8 mm sands

* SEL PRB POLYDIANE + system

PRB ISOPLAST 2301 S RCFlexible, anti u.v. polyurethane paint.

15 colours

tub of5.25 kg

tub of26.25 kg



Protective and finish coat on Polydiane + sealing Paint on concrete floor with PRB SINXOL 10 R primer: P3 premises + private garages PRB ISOPLAST 2301 SRC: with polymer aggregate for “Non slip” finish PRB ISOPLAST 2301 S: Anti-UV finish for raised edges, cornices, bands or the floors of dry premises

Multi-substrate New build and refurbishment Improves the adhesiveness of levelling products and mortars Pore-filler fixative: reduces air bubbles

Multi-substrates, ideal on timber and for refurbishments Clean and quick work Rough: increases adherence Very easy to use on walls

Improves the adhesive, wear and waterproofing characteristics of mortars. Compatible with grouting mortars, C1 type adhesive mortars and floor levelling renders

All purpose in private and collective buildings Suitable for all glued coverings Walkable after 3 h Machine or manual application

For P3 heavy duty floors Walkable after 3 h Smooth and professional finish Machine or manual application Especially recommended for all adhesive coverings

Special for flexible coverings Fluid: smooth and professional finish Fast setting and hardening Pumpable

Accelerated drying Quick installation on the same day: PVC 6 h, tiling 3 h Easy smoothing Pumpable

High mechanical strength, can remain bare Machine or manual application Fast setting and hardening Can be painted



FLOOR LEVELLING AND SMOOTHING continuedFibred quick setting or not

SCREEDSScreed mortars

Anhydrite, calcium sulphate based

Other floor mortars

PRB PLANISOL FIBRÉP3 premisesFibred, self-levelling render.

PRB PLANIFIBRE SRP4S R premisesHigh-performance fibre-based levelling render, quick drying.


of thickness

Grey

25 kg

1 t

1.5 kg/m2/mm

of thickness

PRB PLANIFIBREP4S premisesHigh-performance fibre-based levelling render, new and renovation work.


of thickness


of thickness

PRB PLANISPID RÉNOP3 premisesSelf-levelling render special anhydrite and refurbish-ment


thick

PRB PLANIFORTP3 premisesSelf-levelling smoothing mortar.

Grey 30 kg

Slurry:2 to 3 kg/m2

Mortar: 20 kg/m2/cm of thickness

PRB MORTIER CHAPE FIBRÉP2/P3 premisesFibre screed mortar.

Grey 25 l0.4 bag/m² for a thick-

ness of 1 cm

PRB MORTIER CHAPE ALLÉGÉ 650P2/P3 premisesLightweight mortar for rehabilitation work.

Grey 25 kg

Slurry:2 to 3 kg/m2

Mortar: 20 to 22 kg/m2/cm of thickness

PRB CHAPECEM NP4/P4S premisesReady-to-use mortar for screeds, quick setting.

Grey 25 kg

Slurry:2 to 3 kg/m2

Mortar: 20 to 22 kg/m2/cm of thickness

PRB CHAPECEM HPRP4/P4S premisesReady-to-use mortar for screeds, quick setting and drying.

Grey

Other colours25 kg

3 to 6 kg/m2 for powdering

12 kg/m2 approx. on included

or covering screeds

PRB FINIDURSurface hardening micro mortar.

Grey 25 kg

18 to 20 kg/m² per cm thickness depending on the mortar compact-

ness

PRB CHAPECEM TRADIP2/P3 premisesNormal setting, semi-rapid covering mortar.NEW

All purpose new build and refurbishment Thickness from 3 to 15 mm (spot levelling up to 30 mm) Perfect smoothing Compatible with underfloor heating Pumpable

Up to 30 mm in a single application Especially suitable for refurbishments Compatible with all underfloor heating Smooth and neat finish (interior and exterior) Pumpable

Compensated shrinkage: special timber flooring and refurbishment product

High performances for all premises Quick covering Smooth and professional finish

Great workability, no shrinkage no tension Thickness up to 30 mm Compatible with hydraulic underfloor heating Quick setting Fine appearance

Shaping and levelling from 5 to 30 mm for interior floors High strength Fast setting and hardening Pumpable

Ready-to-use Traditional cement use Adhesive installation after 48 h Thickness from 1.5 to 10 cm

Shower: screed + sealing in 4 h Management of difficult to access sites Quick recommissioning Compensated shrinkage

Tiling installation or sealing after 24 h Use with a screed pump Compensated shrinkage Ideal for balconies and paths

Ready-to-mix mortar, pre-mixed to 350 kg/m3 (CEM 1) Contains fibres, improves resistance to micro-cracking (shrinkage) Special for new build and refurbishment

Reduced load on the floor of 6.5 kg/m²/cm (weight divided by 3) Can be covered without levelling: tiling can be laid after 5 to 7 days Application thickness from 5 to 20 cm Loads stable in wind (clean work site) Easy to mix in a concrete mixer or using a screed pump

Ready-to-use coloured hardener Used to obtain a wear coat on a fresh slab surface Superior hardness: suitable for floors subjected to heavy traffic



3 • FLOOR PREPARATION continued

4 - TILING

SCREEDS continuedHydraulic binders for screeds

UNDER-TILE AND UNDER-SCREED SYSTEMSWaterproofing and sealing products

PRB MANUCEM HPRP4/P4S premisesHigh performance binder for quick drying and setting screeds.

Grey 25 kg

Slurry:0.5 to 1 kg/m2

Mortar: 3.4 to 4.4 kg/m2/cm of thickness

PRB MANUCEM NP4/P4S premisesBinder for semi-quick drying and setting screeds.

Grey 25 kg


Mortar: 3.4 to 4.4 kg/m2/cm of thickness

Yellow 20 kg

0.8 kg/m2

for a thickness of 0.5 mm

depending on the substrate

PRB PRÉSERFONDSPEC SystemUnder-tile waterproof protection resin.SEE SMALL PACKAGING LINE

Kit for 6 m2

PRB KIT D’IMPERMÉABILISATION SOUS CARRELAGE(PRÉSERFOND KIT)- 1 l of NON-DRIP FIXATIVE PRIMER- 6 kg of “UNDER-TILE PROTECTION

UNDER-LAYER” resin - 1 reinforced strengthening band ARM 120 Length 10 metres.

Grey

PRB CEL CÉRAMICATEx CSTB n°2220 Swimming poolsATEx CSTB n°2221 Sealing renderUnder-tiling and under-screed liquid sealing system.SEE SMALL PACKAGING LINE

16 kg kit

8 kg kit

32 kg kit

Powder + resin

in 2 coats: 2.5 to

3.5 kg/m2

PRB MANUCEM TRADIP2/P3/P4/P4S premisesScreed binder, normal setting and semi-rapid covering.

Grey 25 kg


Mortar: 2.2 4.4 kg/m2/cm of thicknessNEW

High performance binder Traditional cement use Adhesive installation after 48 h Thickness from 1.5 to 10 cm Variable binder and micro concrete

Compensated shrinkage screed, can be covered after 2 to 4h Especially suitable for store refurbishments Premises can be commissioned quickly Variable dosage mortars and micro-concretes

Compensated shrinkage screed, can be covered after 24h High performances Use with a screed pump Variable dosage mortars and micro-concretes

Single-component, solvent free Easy application with a roller Forms a sealed and flexible film Protects substrates that are vulnerable to water



UNDER-TILE AND UNDER-SCREED SYSTEMS continuedSealing membranes, mats and tapes

PRB SINGLE REINFORCEMENT TAPE ARM 12012 cm Reinforcement tape for corners, cracks and joints (PRB PRESERFOND).

Rolls of 10 m

PRB WATERPROOFING MEMBRANESE3 / SP3 SealingFlexible and waterproof membrane.

BlackRolls of

1 m x 15 m

PRB BRIDGING TAPE BP 10010 cm adhesive tape to assemble bands and connection for the WATERPROOFING MEMBRANE.

BlackRolls of 15 m2

PRB SM 200 SEALING TAPE20cm tape for sealing floor/wall angles, holes and bleed-throughs.

BlackRolls of 25 m2

PRB CÉRAMIC MATIFS / SPEC water protectionUnder-tile sealing mat.

RedRolls of

1 x 15 m.15 m2

PRB CÉRAMIC IFS SPEC MATCSTB Technical assessment: SPEC: n°13/15-1271*01 ExtEPI: n°13/15-1272*01 ExtUnder-tile sealing mat for interior walls and floors.

OrangeRolls of

1 x 30 m.30 m2

PRB SPEC INNER CORNERPre-shaped corner with a coat of SEBS resin for easy corner treatment.

Blister containing 2 items

PRB SPEC OUTER CORNERPre-shaped corner with a coat of SEBS resin for easy corner treatment.


PRB SPEC BOARDBoard with coat of SEBS resin for the treatment of pipe passages through walls


Under-tile soundproofing

Roll of 5 m2PRB ARMAPHONE4 x 4 GLASS FABRICPRB PLANIPHONE 19 system glass fabric.

White 100 m rollPRB 100 SC 19 INSULATION TAPEPeripheral insulating tape in polyethylene foam for PRB SOUCHAPE 19.

Roll of 75 m2

1.5 m x 50 m

PRB SOUCHAPE 19P2/P3 premisesUnder-screed 19 dB phonic insulation (∆ Lw).

5 m roll

10 m roll

PRB SPEC REINFORCED TAPE12 cm reinforcement tape with a layer of SEBS resin for corner, piping and crack treatment.

Roll of 22 m2

White Roll of 40 m2

PRB ARMACELMesh reinforcement. 2 x 2 glass mesh.Used in combination with PRB CEL CERAMIC liquid seal. 0.80 m x 50 m rolls

Intermediate floor sealing (IFS) Substrate water protection (SPEC method) Easy to install Separation from substrates

Waterproof (IFS) High pressure resistance Easy to install Separation of substrates and crack bridging

Easy to glue and quick sealing Tiling can be laid on the same day: Separation of substrates including micro-cracks (absorbs tension)

Lightweight and non-allergenic fibre Impact sound reduction of 19 dB (∆ Lw) Compliant with NRA 2000 Can be covered with thermal insulation Classification as per NF P 61-203: SC1 a2 A Ch – SC1 b1 A


4 • TILING continued

UNDER-TILE AND UNDER-SCREED SYSTEMS continuedUnder-tile soundproofing (continued)

PRB PLANIPHONE 19 SYSTEMThin soundproofing system.

Advantages

Impact sound reduction of 19 dB (∆ Lw) Triple layered fibre insulation in 1 m x 0.50 m tiles Superior strength: better solidity for all works and wet rooms Compliant with NRA 2000 acoustic requirements, Qualitel referencing Quick and simplified installation

KIT CONTENTS 5 m2 KIT 20 m2 KIT 80 m2KIT

Comb 1 Comb A1 1 Comb A1 1 Comb A1

PRB PLANIPHONE 19 insulation 10 boards 40 boards 160 boards

PRB•COL PHONE adhesive 1 1 kg tub 1 4 kg tub 4 4 kg tubs

Edge tape PRB BP 50 1 10 m roll 1 20 m roll 4 20 m rolls

PRB ARMAPHONE glass fabric 4 x 4 mesh 1 5.5 m2roll 1 22 m2 roll 4 22 m2rolls

PRB ADHESIVE MORTAR 2 25 kg bags 6 25 kg bags 22 25 kg bags

PRB GROUTING MORTAR 1 5 kg bag 2 5 kg bags 2 20 or 25 kg bags

Pallet weight 65 kg 245 kg 880 kg

Insulating tilesPLANIPHONE 19

EDGE tapeBP 50 Insulation

adhesive 1 kg or 4 kg

PRB•COL PHONE

PRB ARMAPHONE glass fabric in 4 x 4 mesh

Comb A1

PRB PLANIPHONE P2 ST SYSTEM (without “ARMAPHONE” mesh)

PRB PLANIPHONE NEUTRAL SYSTEM (NO ADHESIVE, NO JOINTS, NO “ARMAPHONE” MESH)



PRB PLANIPHONE 19 insulation 10 boards 40 boards 160 boards PRB•COL PHONE adhesive 1 tub of 1 kg 1 tub of 4 kg 4 tubs of 4 kg

Edge tape PRB BP 50 One 10 m roll One 20 m roll Four 20 m rolls

PR•COL FLUID HPR 2 25 kg bags 6 25 kg bags 22 25 kg bags

PRB•JOINT HPR 1 5 kg bag 2 5 kg bags 2 20 or 25 kg bags



PRB PLANIPHONE 19 insulation 10 boards 40 boards 160 boards PRB•COL PHONE adhesive 1 tub of 1 kg 1 tub of 4 kg 4 tubs of 4 kg

Edge tape PRB BP 50 One 10 m roll One 20 m roll Four 20 m rolls

FLEX/HPR KIT : PRB•COL FLEX + PRB•JOINT HPR

N/HPR FLUID KIT: PRB•COL FLUID N + PRB•JOINT HPR

SPID HP/HPR KIT : PRB•COL SPID HP + PRB•JOINT HPR

FLUID HPR/HPR KIT : PRB•COL FLUID HPR + PRB•JOINT HPR

FLUID N/SOUPLE KIT : PRB•COL FLUID N + PRB•JOINT SOUPLE

FLEX/SOUPLE KIT : PRB•COL FLEX + PRB•JOINT SOUPLE



UNDER-TILE AND UNDER-SCREED SYSTEMS continuedUnder-tile soundproofing (continued)

PRB PHONIC INSULATION BOARD 0.5 m2

PRB EDGE BP 5050 x 3

10 ml

20 ml

TILE LAYINGAdhesive mortars

Greyand

White25 kg

3.5 to 8 kg/m2/mm of thicknessdepending

on the comb and quantity

applied

PRB•COL POUDREClass C1 TThick adhesive mortar

Greyand

White25 kg



applied

PRB•COL PLUSClass C2 EImproved adhesive mortar

Greyand

White25 kg



applied

PRB•COL PROClass C2 ETImproved multi-purpose adhesive mortar

Greyand

White25 kg



applied

PRB•COL FLEXClass C2 ET/EGImproved high performance adhesive mortar

Super white

25 kg



applied

PRB•COL WHITEClass C2 ETImproved “Super white” adhesive mortar for showers

Greyand

White25 kg



applied

PRB•COL SPID HPClass C2 FHigh performance, quick-setting adhesive mortar

White 25 kg



applied

PRB COLLE ET JOINT POUDRE 2 EN 1Mortar class C2 EGrout class CG2 WAAdhesive mortar and grout

Greyand

Beige25 kg



applied

PRB•COL TERRASSEClass C2Improved adhesive mortar for patios

Laying of small or large format ceramic tiles Patios and private swimming pools

Laying of standard tiles New build and refurbishment Interior and exterior Grey and white

Withstands the laying of very thick tiling and paving Heat and frost resistant Loads up to 25 mm thick Format up to 4,000 cm²

Mixed binder based improved adhesive Extended open time Suitable for refurbishments and pools Grey and white

Grouting in 2 to 5 h Accelerated setting in cold weather Premises can be re-commissioned quickly Tiling of any porosity

Excellent slip resistance (high weight: up to 40 kg/m²) Water repellent mortar for wet rooms Format up to 60 x 60 cm

Extended open time and slip resistant Double mixing Direct use on old tiling Use in swimming pools and ponds Small and large format porcelain stoneware

Special for mosaics and private swimming pools Water repellent fixing and grouting Formats up to 60 x 60 cm Thin grouts from 1 to 6 mm




FIXING TILING continuedAdhesive mortars (continued)

Cement grey

25 kg

4 to 8 kg/m2

/mm of thicknessdepending on the comb and

quantity applied

PRB•COL FLUID SCASpecial anhydrite fluid adhesive mortar

Greyand

White25 kg

4 to 8 kg/m2


quantity applied

PRB•COL FLUID NClass C2 EGSingle side application fluid adhesive mortar

Grey 25 kg

4 to 8 kg/m2


quantity applied

PRB•COL FLUID HPRClass C2 FGHigh performance quick setting fluid adhesive mortar

Greyand

White25 kg

3.5 to 8 kg/m2/mm

of thicknessdepending on the comb and

quantity applied

PRB•COL MONOFLEX HPClass C2S1 ETImproved flexible adhesive mortar, very high performance.

Greyand

White25 kg

1.8 to 8 kg/m2/mm


quantity applied

PRB•COL DUO FLEXClass C2S1 ET (normal)Class C2S1 EG (fluid)Improved flexible fibred adhesive mortar

Grey 15 kg

1.8 to 4,8 kg/m2/mm


quantity applied

PRB•COL DUO MAXClass C2S1 E (normal)Class C2S1 EG (fluid)Flexible adhesive mortar double mixing rate

Greyand

White25 kg

4 to 8 kg/m2


quantity applied

PRB•COL SOUPLEClass C2S1 EImproved flexible adhesive mortar

Greyand

White25 kg

3.5 to 8 kg/m2/mm

thick depending on the comb and quantity applied

PRB•COL TOPClass C2S1 F / C2S1 FGImproved, quick-setting, flexible adhesive mortar

Adhesives

Off white

Off white

Off white

25 kg

25 kg

25 kg

2.5 to 5 kg/m2/mm


quantity applied

2.5 to 5 kg/m2/mm

thick depending on the comb and

quantity applied

2.5 to 5 kg/m2/mm


quantity applied

PRB•COL PÂTEClass D1 ETStandard thick adhesive

PRB•COL PÂTE PROClass D2 EImproved adhesive

PRB•COL PÂTE PLUSClass D2 ETHigh performance improved adhesive

White 15 kg

1.5 to 4.4 kg/m2/mm


quantity applied

PRB•COL PÂTE ALGClass D2 ETHigh performance lightweight adhesive



3.5 kgWhite

PRB COLLE ET JOINT 2 en 1Class D2Adhesive mortar for laying and grouting interior wall tiles and work surfaces.SEE SMALL PACKAGING LINE

2.5 to 4.5 kg/m2/mm


quantity applied

Direct application with no primer Single application up to 3,600 cm² Grouting possible after 4 h Compatible over a heating system

Suitable for U4 P4 / U4 P4S heavy traffic premises Normal setting simplified installation Easy to mix and apply

Suitable for U4 P4 / U4 P4S heavy traffic premises Quick setting simplified installation Grouting after 2h Direct use on old tiling Easy to mix and apply

Extended open time Routine new build and refurbishment works including underfloor heating Ceramic tiles and natural stone

Superior adherence Special for facades: fixing of stoneware and stones up to 28 metres High resistance to temperature variations Recommended for all technical work Underfloor heating

Variable mix 2-in-1 formula Suitable for all types of underfloor heating Laying of large formats up to 10,000 cm² Single and double application

Easier working conditions: lighter bag with handles and no dust Grouting possible after 4 h Fluid: single application up to 10,000 cm2

Smooth texture: easy to apply

Double mix: normal, fluid High strength in U4 P4 / U4 P4S premises Grouting 2 h after laying, heavy traffic after 24 h Laying of large formats up to 10,000 cm² Compatible with PRB CEL CERAMIC sealing

Ready-to-use For dry and moderately damp premises Laying of tiling up to 2,000 cm² Slip resistant

Ready-to-use Suitable for wet rooms Small and large format laying Extended workability time

Ready-to-use High damp resistance Use for refurbishment on old tiling and paint Slip resistant

Ready-to-use Lightweight and smooth: ultra white paste Bonding of small and large formats up to 3600 cm² Improved working conditions: consumption reduced by 40 % Extended workability time

Ready-to-use, solvent free Quick fixing and drying: grouting after 4h Easy grout cleaning and smooth finish White colour



FIXING TILING continuedTechnical adhesives

Traditional laying adhesive

Grey 25 kg

1.5 to 5 kg/m2/mm of thicknessdepending on

the comb and quantity

applied

PRB•COL SCELLaying as per DTU 52.1Cement adhesive for cemented laying

TILE GROUTINGCement grouting

20 coloursand special

colours

11 colours

16 colours

11colours

17 colours

20 kg

15 kg

25 kg

20 kg

25 kg

150 to 500 g/m2

depending on the format of the tiles,

the depth and width of the

grouting

150 to 800 g/m2



grouting

200 to 800 g/m2

depending on the format of the tiles, the depth

and width of the grouting

200 to 800 g/m2

depending on the format of the tiles, the depth and width

of the grouting

200 to 800 g/m2

depending on the format of the tiles, the depth and width

of the grouting

PRB JOINT FINClass CG2 WAFine water-repellent grouting

PRB JOINT RECTIFLEXClass CG2 WAFine water-repellent grout & semi-quick setting.

PRB JOINT LARGEClass CG2 WAWide water-repellent grouting.

PRB JOINT SOUPLEClass CG2 WAImproved flexible grouting.

PRB JOINT XTClass CG2 WAWater-repellent double mix wide grouting.






White, Grey and

Granite grey

tub of 5 kg

1.6 kg/m2

/mm of thicknessdepending

on work

PRB COLLE ET JOINT ÉPOXYClass R2/RGEpoxy mortar for laying and grouting.

Whiteand Grey

Powder25 kg bag

Resin6.5 l jerrican



applied

PRB•COL TECHNIKClass C2 FTwin-component adhesive mortar, high performance, quick-setting

High resistance to chemical agents and high pressure hoses Easy to apply, clean using water, solvent free Very strong adherence on special substrates and in the industrial sector Superior waterproofed grouting (improved hygiene)

Specially suited for use on natural stone and reconstituted tiles Walkable after 12h Heavy traffic premises U4 P4/ U4 P4S Excellent adherence for all tiling Open for walking and grouting after 4h

Improves the bonding of traditionally laid tiling Superior adherence compared to pure cement Can be used on low porosity tiles and stones Use as slurry

Droplet effect (easy care) 1 to 5 mm grouting Non-abrasive: ideal for bathroom tiles, marble and polished

stoneware Smooth finish

Flexible and supple grouting 1 to 8 mm grouting Fluid: Easy to apply and clean Quick hardening: light traffic after 5 h

Increased abrasion resistance 3 to 15 mm grouting Droplet effect (easy care) Professional finish

Flexible and supple grout for substrates with major constraints 3 to 15 mm grouting High performance water-repellent grouting Recommended for underfloor heating, wood flooring, soundproofing system, etc. Perfect smooth finish

Fluid for floors, Thick for walls and floors 3 to 15 mm grouting Easy to apply and clean Professional finish




TILE GROUTING continuedCement grouting (continued)

Resin grouting

7 colours

8 colours

11 colours

17 colours

25 kg

25 kg

20 kg

25 kg

0.5 to 2 kg/m2



grouting

200 to 800 g/m2



grouting

250 to 900 g/m2



grouting

3 to 5 kg/m2

depending on cladding tile

format, the depth

width of the pointing

PRB JOINT OPUSClass CG2 WASpecial grouting for stone paving.

PRB JOINT HPRClass CG2 WAFast-setting flexible grouting.

PRB JOINT FRClass CG2 WAHigh strength water-repellent grouting

PRB JOINT BRIKClass CG2 WABrick and cladding tile pointing mortar.




5 colours 25 kg

0.700 to 2 kg/m2



grouting

PRB TOP JOINTClass CG2 WAColoured grouting for concrete tiles.

Whiteand

Silver grey

Tub5 kg

1.6 kg/m2

/mm of thicknessdepending on work

PRB JOINT CARRELAGE ÉPOXYClass R2/RGEpoxy mortar for laying and grouting.

XXL grouting: from 6 to 50 mm and 100 mm Water-repellent grouting with 3 finishes (sponged, smoothed, brushed) Compatible with paving

Walkable after 3 h 3 to 15 mm grouting High performance, quick-hardening, water-repellent grouting Suitable for large sizes

Double finish smooth or rustic pointing 5 to 15 mm pointing Reduced water absorption

Withstands chemical attacks (pH ≥ 4) 2 to 12 mm grouting Suitable for premises cleaned using a high pressure hose Recommended for pools and technical rooms

Suitable for tiles and paving (concrete, terra cotta and natural stone) 5 to 20 mm grouting Traditional finish

High resistance to chemical agents and high pressure hoses Easy to apply, clean using water, solvent free Very strong adherence on special substrates and in the industrial sector Superior waterproofed grouting (improved hygiene)



LIQUID PAINTSAdhesive primers

Colourless

WhiteandGrey

5 l

4 l

25 l

15 l

150 g/m2

depending on the substrate porosity and the surface appearance

200 to 300 g/m2

per coat de-pending on

the porosity of the substrate

PRB ACCROFOND ISolvent-based backing fixative.

PRB PRIMFIXUniversal adhesive primer.

Key coats

Interior paints

Exterior paints

ColoursPRB

20 kg

300 g/m2

per coat for medium porosity

substrates

PRB CRÉPIFOND MINÉRAL GMineral key coatD2 (A0)

ColoursPRB

ColoursPRB

4 l

15 l

6 kg

20 kg

6 kg

17 kg

1 l for 9 to 11 m2

200 to 300 g/m2

per coat

300 g/m2

per coatapprox.

PRB COLOR MAT INTÉRIEUR PROMatt paint for interior decoration.(A0)

PRB COLOR ACRYLAcrylic co-polymer based paint in aqueous dispersion.D2 (A0)

White 15 l1 l for

8 to 10 m2

PRB COLOR MAT INTÉRIEUR AIRLESSSpecial airless matt paint.(A0)

ColoursPRB

PRB COLOR MINÉRAL PLUSPotassium silicate based mineral paintD2 (A0)

ColoursPRB

4 l

15 l

1 l for 10 to 13 m2

PRB COLOR VELOUTÉ INTÉRIEUR PROSilk finish paint for interior decoration.(A0)

Colours PRB

6 kg

20 kg

250 to 300 g/m2

per coat for medium porosity

substrates

PRB CRÉPIFOND FAcrylic resin based paint in aqueous phase. D2 (A0)

5 - PAINTERS & FLEXIBLE FLOOR COVERING SPECIALISTS

PRB CRÉPIFOND GAcrylic resin based paint in aqueous phase. D2 (A0)

Fixes porous and/or powdery backing Improves the adherence of future coverings Suitable for difficult substrates Quick drying Fixes porous and/or powdery backing Improves the adherence of future coverings Suitable for difficult substrates Quick drying

Fixative Very adhesive High covering power Suitable for refurbishments Suitable for a large number of substrates (contact us)

Resin silicate based paint Deep matt appearance Good permeability ideal for new masonry Ready-to-use

Matt appearance Very easy to apply Slight odour High covering and opacifying properties Quick drying

Matt appearance Good filling and covering properties Odourless Limited mist formation Quick drying

Silk appearance, washable and cleanable (to be kept) Very easy to apply Slight odour High covering and opacifying properties Quick drying

Facade protection and decoration Matt appearance Preventive protection of the paint film from algae and fungi

Facade protection and decoration Deep matt appearance Very good resistance to soiling Ideal for Bâtiments de France restoration (see authorised substrates)

Highly opacifying key coat Multi-purpose on substrates Compatible with all PRB organic finishes



5 - PAINTERS & FLEXIBLE FLOOR COVERING SPECIALISTS continued

LIQUID PAINTS continuedExterior paints (continued)

FWC Flexible waterproof covering

6 kg

6 kg

6 kg

6 kg

6 kg

20 kg

20 kg

20 kg

17 kg

17 kg

17 kg

20 kg

300 g/m2

per coatdepending on the roughness

of the substrate

300 to 450 g/m2

per coatdepending on

use

300 to 450 g/m2

per coatdepending

on use

600 to 700 g/m2

per coatdepending

on use

200 to 400 g/m2

per coatdepending

on use

200 g/m2

per coatdepending on the substrate

structure

200 to 300 g/m2

per coat

ColoursPRB

PRB COLOR SILOCRYLPaint with siloxane resin additive.D2 (A0)

ColoursPRB

PRB COLOR SILOXANESiloxane resin based paint.D2 (A0)

ColoursPRB

PRB COLOR ACRYL FLEXSemi-thick, flexible, fireproofed covering,acrylic resin based.D3/I1 (A1-A2)

ColoursPRB

PRB COLOR SILOFLEXSemi-thick, flexible, fireproofed covering,with a siloxane resin additiveD3/I1 (A1-A2)

ColoursPRB

PRB COLOR IMPER & IMPERMATWaterproofing covering for vertical exterior wallsI1 to I4 (A2-A5)

ColoursPRB

PRB COLOR TOPFLEXWaterproofing covering, highly elastic.

ColoursPRB

PRB COLOR LITE HYDROMatt facade face lifting paint using a Hydro Pliolite® resin base.D2 (A0)

Facade protection and decoration Matt appearance Excellent permeability to water vapour and excellent resistance

to the elements thanks to its water-repellent binder Very good resistance to soiling Excellent ageing resistance

Facade protection and decoration Deep matt appearance Opacifying and filling paint Excellent adherence without a primer on new or old substrates (EBS technology) Very good permeability to water vapour (micro-porous film) and excellent ageing resistance

Facade protection and decoration Deep matt appearance Excellent permeability to water vapour and excellent resistance

to the elements thanks to its water repellent binder High covering and filing properties, very comfortable to apply Excellent ageing resistance

Protection and decoration of tiled or micro-cracked facades Smooth finish Satin appearance Excellent U.V. resistance. Low soiling

Protection and decoration of tiled or micro-cracked facades Smooth finish Satin matt appearance Excellent U.V. resistance. Low soiling due to the droplet effect

Crack resistance: A2: 1 x 300 g/m2

A3: 2 x 250 g/m2

A4: 2 x 400 g/m2

A5: 2 x 400 g/m2 + Reinforcement + 400 g/m2

Matt or satin finish Possibility of a structured finish used PRB CREPIMUR Souple M or G

Very high performance technological technique (contact us) Can be used for 3 different systems on a priming coat: – 6/10ths system – 10/10ths system Granite finish – 30/10ths system Anti-soiling technology using a UV reticulation system. Benefits from specifications approved by an inspection body (insurability)



STRUCTURED COATINGSTPC Thick Paint Coatings

8 kg

8 kg

25 kg

25 kg

8 kg

8 kg

8 kg

25 kg

25 kg

25 kg

25 kg

2.1 to 2.5 kg/m²

2.2 to 3.5 kg/m²

3.5 to 5 kg/m²

CRÉPIRIB F:2 to 2.5 kg/m²

CRÉPIRIB G:3 to 4 kg/m²

2.4 to 2.8 kg/m²

for a floated

finish

4 to 5 kg/m²for

a floated finish

ColoursPRB

PRB CRÉPIMUR FFireproofed, structured, organic render.D3 (A1)

ColoursPRB

PRB CRÉPIMUR GFireproofed, structured, organic render.D3 (A1)

ColoursPRB

PRB CRÉPIMUR MFireproofed, structured, organic render.D3 (A1)

ColoursPRB

PRB CRÉPIRIB F & GFireproofed, structured, organic render.D3 (A1)

ColoursPRB

PRB CRÉPISIX MThin, fireproofed structured coating with siloxane ad-ditive.D3 (A1)

ColoursPRB

PRB MARBRO MURODecorative natural marble granulate based finishing render.

8 kg

25 kg

Floated finish:

CRÉPOXANE F2.1 to

2.5 kg/m²

CRÉPOXANE M2.5 to

3.5 kg/m²

ColoursPRB

PRB CRÉPOXANE F & MOrganic, fireproofed, structured render with siloxane additive.D3 (A1)

20 kg

Undercoat: 1.1 to

1.5 kg/m²

Finish: 0.6 to 1 kg/m²

ColoursPRB

PRB CRÉPILIS SOUS-COUCHE & FINITIONFine, two pass, fireproofed fine finishing render.D3 (A1)

Facade protection and decoration Matt appearance Floated, rolled and flattened finish Fine grading.

Facade protection and decoration Matt appearance Floated, rolled and flattened finish Medium grading

Facade protection and decoration Matt appearance Floated, rolled and flattened finish Large grading

Facade protection and decoration Matt appearance Fine or large grading Copolymer and mineral filler based coating Allows for a sanded or ribbed finish

Facade protection and decoration High end natural marble granulate finish Very good resistance to shocks and scratches Very good ageing properties

Facade protection and decoration Very matt finish Very thin finish Low soiling Can be coloured using a colouring machine

Facade protection and decoration Matt droplet effect appearance Medium grading (1.5 mm) Floated, rolled or flattened finish Low soiling

Facade protection and decoration Very matt finish Good permeability to water vapour Droplet effect, low soiling Fine or medium grading



5 - PAINTERS & FLEXIBLE FLOOR COVERING SPECIALISTS continued

STRUCTURED COATINGS continuedThick FWC

ADHESIVES FOR FLEXIBLE COVERINGSFlooring adhesives (PVC floor coverings and carpeting…)

Paint additive and TPC

TMC Thick Mineral Coating

Wall adhesive (glass fabric…)

from clear to slightly

yellow

PRB SR ADDITIFDrying accelerator for finishing products.

Light beige

PRB FIXOSUPHigh performance acrylic adhesive.

WhitePRB FIXOMUR TDVWall adhesive for glass fabric

WhitePRB FIXO DPAAdhesive for removable PVC or textile loose lay tiles;

250 ml

20 kg

20 kg

5 kg

15 kg

80 to 130 g/m2 depending

on the substrate

1 dose of 250 ml

for 1 tub of 17 to 25 kg

200 to 350 g/m2 approx.

250 g/m2 approx.

depending on site

conditions

Light beige

PRB FIXOTECHAcrylic adhesive for PVC flooring and carpeting. 20 kg

250 to 300 g/m2 depending on covering

5 l

150 g/passdepending

on site conditions

AmberPRB FIXOPRÈNEPolychloroprene adhesive for rubber or linoleum cov-erings.

ColoursPRB

PRB CRÉPIMUR SOUPLE M & GFireproofed, structured, flexible, organic render.I1 to I4 (A2 - A5)

25 kg

M Version:2.3 kg/m2

per coat

G Version:3.5 kg/m2

per coat

25 kg

Float finishF Version:

2.1 to 2.5 kg/m2

M Version:3 kg/m2

ColoursPRB

PRB CRÉPIXATE F & MThick, structured mineral coating, potassium silicate based.D3 (A1)

Speciality adhesives (rubber coverings, linoleum, loose lay tiles…)

Facade protection and decoration for new build and refurbishment Conceals micro-cracks < 2/10th of a mm Combined with PRB COLOR IMPER, it achieves a high quality aesthetic appearance (A2 to A5 system) It can be combined with PRB COLOR TOPFLEX depending on specific specifications documents Medium and large grading

Facade protection and decoration Very matt finish Can be used without primer (contact us) Fine or medium grading

Forms a surface film allowing quick drying of TPC, TMC, paints and PRB FONDISOL PE Ideal in wet and cold weather

Powerful tack: ideal for nerved coatings and LVT PVC slats Easy to apply + extended workability time Excellent resistance to passage PVC installation using the “shower system” (floor - wall) Very low VOC emissions

High tack properties, multi-purpose Good puncture resistance Easy to apply Very low VOC emissions

Fungicide included High tack property Very good slip for easy covering positioning Low consumption Easy application without drips

Powerful and fast bonding High multi-material adherence Long open time High resistance to temperatures from -30°C to + 70°C

Adhesive fixative with permanent tack Good resistance in premises with heavy traffic and under roller seats Easy to apply and low consumption Allows immediate replacement of worn tiles Immediate walkability after the flooring has been laid



6 - PW & CARCASSES

MORTARS AND CONCRETESMasonry: mortars and concretes Standard mortars

30 kg

25 kg

Depending on the work


GreyPRB MORTIER DE MONTAGEG TypeReady-to-use building mortar.

Light greyPRB MULTIPOSEClass CS IIIUniversal multi-purpose mortar.

25 kg

25 kg

3.5 to 7 kg/m2

1.5 to 7 kg/m2

Grey(for other colours please

contact us)

PRB POSE BLOC CT TypeAdhesive mortar for the laying of calibrated concrete blocks using thin joints..

Grey(for other colours please

contact us)

PRB POSE BLOC RT TypeAdhesive mortar for the laying of rectified concrete blocks.

30 kgDepending on the work

White

PRB CELLUPOSET TypeAdhesive mortar for the laying of cellular concreteblocks with thin joints.

GreyPRB JOINT PRÉDALLECS IV classJointing render of prefabricated slabs and walls.

15 kg

1 kg of powder for 8 to 10 m of joint (1 cm² cross section)

25 kg

25 kg


25 to 30 kg/m2

for a 5 x 11 x

22 cm brick

GreyPRB MORTIER PRISE RAPIDECS IV classReady-to-use quick setting mortar.

GreyPRB RÉFRACPOSEReady-to-use refractory mortar.

25 kg

5 to 20 kg/m of ridge

depending on the type

of tiles

Off-whiteor

Grey

PRB POSE TUILESLime mortar for roofing elements.

Thin building mortars

Other dressing mortars

NEW

NEW

Used for bricklaying and block laying Time saving (no need to supply the raw materials) Used as a screed mortar: • Mini screed on 10 to 30 mm on slurry • 4 to 7 cm loose screed Special mason’s formula

Natural hydraulic lime based mortar for all routine masonry work Good adherence to most materials Suitable for roof work

Excellent adherence, superior to a mortar made on site Easy mixing on site Contributes to the consistency of the masonry and the reduction of shadowing phenomena on facade renders Available in grey or coloured version for apparent blocks

Easy to prepare and low consumption Easy mixing on site Excellent adherence, superior to a mortar made on site Contributes to the consistency of the masonry and the reduction of shadowing phenomena on facade renders

Adhesive mortar for cellular concrete. block dressing NF 14-306 Used for the occasional filling of spalling Contributes to the thermal performances of walls built using cellular concrete

Rapid masonry bonding and repairs

Used to dress refractory brick in chimney flues, barbecues and their pointing Assembly of flues and bats

Suitable for new build and refurbishment of roofs Very rich in lime Supple product with a fine grading, easy to apply Strong adherence to terra cotta

Easy to apply and smooth Perfect resistance to running, no creepage: possibility of working very thick layers on interior walls and ceilings Excellent retention, thereby preventing premature drying phenomena Quick hardening Regular, fine finish appearance



6 • PW & CARCASSES continued

MORTARS AND CONCRETESStandard concretes (non-structural)

ROADSBonding and blocking

REPAIR PROTECTION AND SEALING MORTARSConcrete repairs

GreyPRB BÉTONConcrete for masonry and fixing work.

GreyPRB BÉTON EXPRESSConcrete for in-ground masonry work.

GreyPRB BÉTON FIBRÉConcrete for optimum masonry work.

GreyPRB BÉTON PLON PLONConcrete used to repair immersed structures.

30 kg

30 kg

30 kg

30 kg





25 kg

3 l

Approx. 2 kg/m²/

mm of thickness

10 m²/l

Grey

Red Oxide

PRB TP COLLE BORDUREClass R1Special quick-setting mortar to fix kerbs, directional islands, urban furniture.

PRB PASSIVANT ACIERCorrosion protection primer for concrete rebars

BINDERSLime

White 15 kgDepending on the work

PRB CHAUX AÉRIENNEClass CL 90Binder for thin finishing renderfor historical monuments and old buildings


PRB CHAUX DE SAINT JACQUESClass NHL 3.5Binder for refurbishment mortars.

Cements


PRB CIMENT BLANCClass CP 52.5 CEM IBinder for routine work.

Dark brown

25 kgDepending on the work

CIMENT PROMPT VICAT®

Natural, very quick-setting cement.

NEW

NEW

NEW

First pass of a traditional two or three layer render system for walls Ideal for older buildings Breathable and strong

Ready to use product No prior mixing required Designed for quick in-ground anchoring: • Of posts (fences, clothes lines, garden benches…) • Small foundations for barbecues, garden sheds, fence walls…

Contains fibres to reduce micro-cracking. Ready-to-use, mix with water Paving, screeds (4 cm minimum), bases, window sills, steps, decorative posts, formwork items, post foundations...

CPA CEM V PMES cement based Withstands seawater and tidal zones High mechanical strength Pumpable Good leaching resistance

White, pure, consistent, can be used to create thin finishing renders Creation of a CL 90 cement/lime or lime/cement plaster finish Rehabilitating properties and favours breathing of walls: reduced damp. Excellent adherence to substrates Highlights your region’s coloured sand and aggregates

Used to create traditional mortars and renders, to point natural stone and brick masonry Highly valued for old building restoration and rehabilitation, suitable for many substrates Can also be used for new builds, either pure or rough with white or grey cements Thanks to its flexibility and fineness, it makes mortars flexible and thick so that they adhere well to the substrates Has rehabilitating and disinfectant properties

Especially recommended for masonry where whiteness is sought Produce: • A rough dressing mortar • A cement mortar • A pointing mortar

Repair or filling of holes, cracks or chinks Quick bonding work Stopping and closing of leaks Resistant to aggressive waters

Direct bonding onto hot mix and concrete Very quick recommissioning Withstands de-icing salt and oils Easy edge pointing Thixotrope: possible thicknesses up to 15 mm

Corrosion protection of reinforced concrete frames and bars Solvent phase Coverable in 2 hours Compliant with the NF EN 1504-7 standard



REPAIR, PROTECTION AND BONDING MORTARSConcrete repairs (continued)

WALL SMOOTHING RENDERSMineral smoothers

Carcass waterproofing and protection

GreyPRB MORTIER D’IMPERMÉABILISATIONGP Type Class CS IVThin coat waterproofing micro-mortar.

GreyPRB PLANIJOINT SOUPLE FIBRÉHigh-performance fibre-based levelling mortar.

Grey

PRB POSEMERG and GP Type Class CS IVMulti-purpose mortar for all marine and immersed environments.

WhiteandGrey

PRB PLANIDRESS F & GFine wall levelling render

WhiteandGrey

PRB IMPERFONDOC Type Class CS IVThick waterproofing mortar for in-ground walls and swimming pools

Light greyandGrey

PRB PLANIMUR TOP FThin wall levelling mortar 0.3 to 5 mm thick.

Light greyPRB PLANIDRESS TOP GThin wall levelling mortar 1 to 10 mm thick.

25 kg

25 kg

25 kg

25 kg

25 kg

25 kg

25 kg

1.5 to 2 kg/m2

per layer of 1 to

2 mm

1.5 kg/m2/mm of thickness


1 kg/m2/mm of

thickness

1.2 to 1.5 kg/

m2/mm of thickness


1.2 to 1.5 kg/

m2/mm of thickness

Light grey

Light grey

PRB TP RÉPAR R4 Class R4Thin fine fibred mortar for structural concrete repairs.

PRB TP RÉPAR R4 PR Class R4Thin, fine, fibred quick-setting mortar for structural concrete repairs.

25 kg

25 kg

2 kg/m2/mm of

thickness

2 kg/m2/mm of

thickness

Organic levelling products

25 kg

PLANIMUR PÂTE F: 0.5 to 0.8 kg

/m2/mm of thicknessPLANIMUR PÂTE G:

0.7 to 1 kg/m2/mm of thickness

Off white

PRB PLANIMUR PÂTE F & GWall levelling paste.

PRB PLANIMUR PÂTE F: fine grain- Mixed with cement: from 0 to 5 mm- Mixed with plaster (interior): from 0 to 50 mmPRB PLANIMUR PÂTE G: slightly grainy- Mixed with cement: from 1 to 10 mm- Mixed with plaster (interior): 1 to 50 mm.

Application possible in large thicknesses up to 70 mm in limited areas Smooth finish. Compensated shrinkage product Excellent resistance to seawater and sulphates

Application possible in large thicknesses up to 100 mm in limited areas

Smooth finish. Compensated shrinkage product Excellent resistance to seawater and sulphates

Interior / exterior (under pressure and back-pressure) for in-ground walls and swimming pools Direct application on masonry (manual or mechanical) The in-ground part can remain bare Very good adherence and shock resistance once hardened

Waterproofing wall and floor substrates Thickness from 8 to 20 mm: used to correct unevenness PMES binder based: mortar can withstand aggressive waters, in the

industrial and agricultural environments Manual or spray projection The in-ground part can remain bare

Special hydraulic binders for exposure to a marine environment Masonry banks and bank stabilisation Applied manually or using a machine

Very fine Easy slip: allowing perfect smoothing in a single application Ready-to-mix single component Quick application and hardening

Extremely easy to prepare Ready-to-mix single component Fine wall mortar for substrate preparation Levelness correction up to 10 mm Smooth, hard and plain appearance

Thickness from 1 to 10 mm Fine wall mortar for substrate preparation Levelness correction up to 10 mm Smooth, hard and plain appearance Can remain uncoated

Hydraulic binder, fibre and resin based product powdered and micronised Manual or machine from 2 to 10 mm Joints and levelling for prefabricated concrete panels Crack repair

Used mixed with cement: • Planimur Pâte F from 0 to 5 mm • Planimur Pâte G from 1 to 10 mm Used mixed with plaster (only for interiors): • Planimur Pâte F from 0 to 50 mm • Planimur Pâte G from 1 to 50 mm Appearance: • Planimur Pâte F: fine • Planimur Pâte G: slightly grainy Product can remain uncoated (on concrete)

NEW

NEW



7 • INSULATION

EPSFacade

EPS PRB FAÇADE TH38 (white) insulation panels

For Thermolook EMI finish TPC, TMC, etc. and Thermolook GF/GM EWI

0.6 x 1.2 m panels. Thermal conductivity: 0.038

38FB60020 PRB.FACADE.TH38 20 (25PX-18M2) Paq

38FB60030 PRB.FACADE.TH38 30-16PX-11.52M2 Paq

38FB60040 PRB.FACADE.TH38 40 -12PX-8.64M2 Paq

38FB60050 PRB.FACADE.TH38 50 (10PX-7.2M2) Paq


























Other sizes: please contact us

External Wall Insulation

Facades



EPS continuedFacade (continued)

Grooved 2F

EPS PRB FAÇADE TH31 (grey) insulation panelsFor Thermolook EMI finish TPC, TMC, etc. and Thermolook GF/GM EWIMandatory sheltered storage and mandatory facade covering0.6 x 1.2 m panels. Thermal conductivity: 0.031 31FG60020 PRB.FACADE.TH31.GREY 20 -25PX-18M2 1 Paq 31FG60030 PRB.FACADE.TH31.GREY 30 -16PX-11.52M2 1 Paq 31FG60040 PRB.FACADE.TH31.GREY 40 -12PX-8.64M2 1 Paq 31FG60050 PRB.FACADE.TH31.GREY 50 -10PX-7.20M2 1 Paq 31FG60060 PRB.FACADE.TH31.GREY 60 -8PX-5.76M2 1 Paq 31FG60070 PRB.FACADE.TH31.GREY 70 -7PX-5.04M2 1 Paq 31FG60080 PRB.FACADE.TH31.GREY 80 -6PX-4.32M2 1 Paq 31FG60090 PRB.FACADE.TH31.GREY 90 -5PX-3.60M2 1 Paq 31FG600100 PRB.FACADE.TH31.GREY 100 -5PX-3.60M2 1 Paq 31FG600110 PRB.FACADE.TH31.GREY 110 -4PX-2.88M2 1 Paq 31FG600120 PRB.FACADE.TH31.GREY 120 -4PX-2.88M2 1 Paq 31FG600130 PRB.FACADE.TH31.GREY 130 -4PX-2.88M2 1 Paq 31FG600140 PRB.FACADE.TH31.GREY 140 -3PX-2.16M2 1 Paq 31FG600150 PRB.FACADE.TH31.GREY 150 -3PX-2.16M2 1 Paq 31FG600160 PRB.FACADE.TH31.GREY 160 -3PX-2.16M2 1 Paq 31FG600170 PRB.FACADE.TH31.GREY 170 -3PX-2.16M2 1 Paq 31FG600180 PRB.FACADE.TH31.GREY 180 -3PX-2.16M2 1 Paq 31FG600190 PRB.FACADE.TH31.GREY 190 -2PX-1.44M2 1 Paq 31FG600200 PRB.FACADE.TH31.GREY 200 -2PX-1.44M2 1 Paq 31FG600210 PRB.FACADE.TH31.GREY 210 -2PX-1.44M2 1 Paq 31FG600220 PRB.FACADE.TH31.GREY 220 -2PX-1.44M2 1 Paq 31FG600230 PRB.FACADE.TH31.GREY 230 -2PX-1.44M2 1 Paq 31FG600240 PRB.FACADE.TH31.GREY 240 -2PX-1.44M2 1 Paq 31FG600250 PRB.FACADE.TH31.GREY 250 -2PX-1.44M2 1 Paq 31FG600260 PRB.FACADE.TH31.GREY 260 -2PX-1.44M2 1 Paq 31FG600270 PRB.FACADE.TH31.GREY 270 -2PX-1.44M2 1 Paq 31FG600280 PRB.FACADE.TH31.GREY 280 -2PX-1.44M2 1 Paq 31FG600290 PRB.FACADE.TH31.GREY 290 -2PX-1.44M2 1 Paq 31FG600300 PRB.FACADE.TH31.GREY 300 -2PX-1.44M2 1 Paq Other sizes: please contact us

PRB EPS R TH38 (white grooved) insulation panelsFor EWI system with Thermolook GF/GM render on metal mesh or glass fabric0.6 x 1.2 m panels. Thermal conductivity: 0.038 2 rabbets 38RB60040 PRB.PSE.R.TH38 40 -12PX-8.64M2 Paq 38RB60050 PRB.PSE.R.TH38 50 -10PX-7.20M2 Paq 38RB60060 PRB.PSE.R.TH38 60 -8PX-5.76M2 Paq 38RB60070 PRB.PSE.R.TH38 70 -7PX-5.04M2 Paq 38RB60080 PRB.PSE.R.TH38 80 -6PX-4.32M2 Paq 38RB60090 PRB.PSE.R.TH38 90 -5PX-3.60M2 Paq 38RB600100 PRB.PSE.R.TH38 100 -5PX-3.60M2 Paq 38RB600110 PRB.PSE.R.TH38 110 -4PX-2.88M2 Paq 38RB600120 PRB.PSE.R.TH38 120 -4PX-2.88M2 Paq 38RB600130 PRB.PSE.R.TH38 130 -4PX-2.88M2 Paq 38RB600140 PRB.PSE.R.TH38 140 -3PX-2.16M2 Paq 38RB600150 PRB.PSE.R.TH38 150 -3PX-2.16M2 Paq 38RB600160 PRB.PSE.R.TH38 160 -3PX-2.16M2 Paq 38RB600170 PRB.PSE.R.TH38 170 -3PX-2.16M2 Paq 38RB600180 PRB.PSE.R.TH38 180 -3PX-2.16M2 Paq 38RB600190 PRB.PSE.R.TH38 190 -2PX-1.44M2 Paq 38RB600200 PRB.PSE.R.TH38 200 -2PX-1.44M2 Paq 38RB600210 PRB.PSE.R.TH38 210 -2PX-1.44M2 Paq 38RB600220 PRB.PSE.R.TH38 220 -2PX-1.44M2 Paq 38RB600230 PRB.PSE.R.TH38 230 -2PX-1.44M2 Paq 38RB600240 PRB.PSE.R.TH38 240 -2PX-1.44M2 Paq 38RB600250 PRB.PSE.R.TH38 250 -2PX-1.44M2 Paq 38RB600260 PRB.PSE.R.TH38 260 -2PX-1.44M2 Paq 38RB600270 PRB.PSE.R.TH38 270 -2PX-1.44M2 Paq 38RB600280 PRB.PSE.R.TH38 280 -2PX-1.44M2 Paq 38RB600290 PRB.PSE.R.TH38 290 -2PX-1.44M2 Paq 38RB600300 PRB.PSE.R.TH38 300 -2PX-1.44M2 Paq Other sizes: please contact us


Facades


Facades



7 • INSULATION continued

EPS continuedBases

EPS PRB ISO SOUB TH35 insulation panels

Dense EPS panels for insulation of in-ground walls up to a depth of 2.4 m.

Thermal conductivity 0.035.

35BB60020 PRB.ISO.SOUB.TH35 20 -25PX-18M2

35BB60030 PRB.ISO.SOUB.TH35 30 -16PX-11,52M2




35BB60070 PRB.ISO.SOUB.TH35 70 -7PX-5.04M2
























In-ground walls

Bases



ROCKWOOLFacade

PRB LDR 431 & PRB LDR ROCKBAY rockwool insulation panelsFor PRB Thermoroche PRE, TMC and hydraulic render Thermolook GF/GM finish EWI systems0.6 x 1.2 m panels. Thermal conductivity: 0.038. Single density 155 Kg/m3

ISOROCHBAY20 ROCKWOOL ROCHBAY 20MM(1P=80.64M2)



ISOROCH43180 ROCKWOOL 431 80MM(1P=21.60M2)




Other thicknesses: please contact us

PRB LDR ECOROCK rockwool insulation panels For PRB Thermoroche TPC, TMC and hydraulic render Thermolook GF/GM finish EWI systems0.6 x 1.2 m panels. Thermal conductivity: 0.036

Twin density 155 Kg/m3 upper layer thickness 20 mm + 90 Kg/m3 lower layer

ISOROCHEC50 ROCKWOOL ECOROCK 50MM(1P=34.56M²)












PRB LDR ISO TF rockwool insulation panelsFor PRB Thermoroche TPC, TMC and hydraulic render Thermolook GF/GM finish EWI systems0.6 x 1.2 m panels. Thermal conductivity: 0.036 (except 30 mm and 40 mm). Single density 125 Kg/m3

ISOROCHTF30 ROCKWOOL ISO TF 30MM (1P=103.68M²)

ISOROCHTF40 ROCKWOOL ISO TF 40MM (1P=77,76M²)

ISOROC36TF50 ROCKWOOL ISO TF36 50MM (1P=63,36M²)

ISOROC36TF60 ROCKWOOL ISO TF36 60MM (1P=51.84M²)








PRB LDR TF rockwool fire barrier bandFor PRB EMI TPC, TMC and Hydraulic render PRB Thermolook GF/GM finish EWI systemPre-coated rockwool insulating bands used as straight fire protection bands

0.2 x 1.2 m bands

COUPFEU100 - FIRE BARRIER BAND TF 100MM (60U-72ML)

COUPFEU120 - FIRE BARRIER BAND TF 120MM (48U-57.6ML)




COUPFEU200 - FIRE BARRIER BAND TF 200MM (30U-36ML)


Facades


Facades


Facades

Products for public works and carcasses (continued)


8 • SELF SERVICE & PC

BUILDER SSTreatment products

Pallet weightNumber of packsPackagingweightColourName & Use

5 l

5 l

56 jerricans

56 jerricans

0.280 t

0.280 t

ColouredPRB ACTIDÉMOUSSE HPCurative (cleaning) action and preventive (protective) action.

Tracing agent

PRB HYDROFUGEAqueous phase liquid for surface water repulsion.

Wall preparation renders

Cements

GreyPRB ENDUIT DE LISSAGE MURAL FINFine wall levelling (2 to 10 mm). Used to repair spalls. High dosage of fixative resin.

WhitePRB CIMENT BLANCMasonry, bonding and repair work. 1 to 3 mm tile grouting.

GreyPRB CIMENT GRISMasonry, bonding and repair work. 1 to 3 mm tile grouting.

Dark brown

PRB CIMENT PROMPT VICAT®

For fast bonding and assembly works.

Dark grey

PRB CIMENT ALUMINEUXQuick production of high performance mortar or concrete. (Withstands 1200° C. Withstands abrasion and corrosion.)

Grey

PRB RAGRÉAGE MURAL POUDRELevelling product to correct walls, repair holes and cracks. Ideal for thick levelling (20 mm approx).

GreyPRB RAGRÉAGE MURAL PÂTEWall and ceiling levelling. To mix with plaster or cement

GreyPRB RAGRÉAGE MURAL RÉNOVATIONPaste levelling for wall refurbishment without scouring the previous covering.

5 kg

1 kg

1 kg

1 kg

1 kg

5 kg

5 kg

5 kg

5 kg

10 kg

10 kg

10 kg

10 kg

5 kg

5 kg

5 kg

128 bags

48 boxes of 6 x 1 kg i.e. 288 bags




128 bags

128 bags

128 bags

128 bags

60 bags

60 bags

60 bags

60 bags

128 bags

72 tubs

72 tubs

0.640 t

0.288 t

0.288 t

0.288 t

0.288 t

0.640 t

0.640 t

0.640 t

0.640 t

0.600 t

0.600 t

0.600 t

0.600 t

0.640 t

0.360 t

0.360 t


BUILDING SS continuedMortars


10 kg

5 kg

5 kg

1.5 kg

5 kg

60 bags

128 bags

128 bags

48 boxes of 6 x 1.5 kg i.e. 288 bags

128 bags

0.600 t

0.640 t

0.640 t

0.432 t

0.640 t

GreyPRB MORTIER À MAÇONNERAssembly and pointing of breeze blocks, masonry bricks, ridges and screed creation.

Stone colourPRB MORTIER BÂTARDBonding of tiles, bricks, facade rendering and pointing.

GreyPRB MORTIER MULTI TRAVAUXRender work, roof tile fixture, wall building, masonry filling, screeds.

Grey

PRB MORTIER DE RÉPARATIONRepair and filling of concrete chipping and deteriorated masonry: balcony edges, window sills, posts, etc.

White

PRB MORTIER DE FINITION BLANCFinishing renders, filling and wall repairs.

Grey

PRB MORTIER DE FINITIONGREYFinishing renders, filling and wall repairs.

GreyPRB MORTIER À PRISE RAPIDEQuick repairs and mortaring.

GreyPRB MORTIER RÉFRACTAIREAssembly of firebricks for fireplaces, barbecues and their pointing. Hearth repairs.

1.5 kg

1.5 kg

1.5 kg

1.5 kg

5 kg

5 kg

5 kg

5 kg

10 kg

10 kg

10 kg

10 kg





128 bags

128 bags

128 bags

128 bags

60 bags

60 bags

60 bags

60 bags

0.432 t

0.432 t

0.432 t

0.432 t

0.640 t

0.640 t

0.640 t

0.640 t

0.600 t

0.600 t

0.600 t

0.600 t

5 kg 72 tubs 0.360 tGrey

PRB MORTIER D’IMPERMÉABILISATIONThin layered waterproofing renders for in-ground walls (foundations, basements, cellars, swimming pools, etc.).


8 • SELF SERVICE & PC continued

BUILDING SSMortars (continued)


5 kg

10 kg

128 bags

60 bags

0.640 t

0.600 t

White

PRB MORTIER COLLE BÉTON CELLULAIRELaying of cellular blocks and panels for walls and partitions.

Complementary products

PLASTER SSPlasterboard specialist - Plasterer

WhitePRB FLEUR DE CHAUXFor whitewashes, renders and pointing. Crack resistant. Flexible and waterproof.

4 kg 60 bags 0.240 t

WhitePRB BLANC DE MEUDONFor opacifying windows, cleaning silverware or crystal objects and gardening.

4 kg 60 bags 0.240 t

White

PRB MORTIER ADHÉSIF HIGH PERFORMANCEHigh performance adhesive mortar for plasterboard.

5 kg 160 bags 0.800 t

WhitePRB COLLE CARREAUX DE PLÂTREQuick-setting, very fine and very white plaster block adhesive.

5 kg 160 bags 0.800 t

White

ENDUIT À JOINT PRISE RAPIDE 4 HQuick-setting adhesive for plasterboard. Creation of joints on plasterboard with tapered edges and plasterboard tape. Ideal for use in cold damp conditions.

5 kg 160 bags 0.800 t

PRB PIGMENTS SYSTÈME COLORLight and weather resistant pigments used to colour renders, pointing, plaster, etc.

48 bundles of4 pots

Pot 200 ml

52 bundles of2 pots

Pot 1 l

33 tubsTub 8 l


PLASTER SScontinuedPlasterboard specialist - Plasterer (continued)


White

ENDUIT À JOINT PRISE STANDARD 8 HStandard setting adhesive for plasterboard. Creation of joints on plasterboard with tapered edges and plasterboard tape. Ideal for use in difficult weather conditions.

5 kg 160 bags 0.800 t

White

ENDUIT À JOINT PÂTEQuick-setting adhesive for plasterboard. Creation of joints on plasterboard with tapered edges and plasterboard tape. Ideal for use in cold damp conditions.

Tub8 kg

72 tubs 0.576 t

JOINT TAPEStandard plasterboard joint tape.

Tape 150 m

10 tapes per box

REINFORCED JOINT TAPEReinforced plasterboard joint tape.

Tape 30 m

10 tapes per box

WhitePRB ENDUIT DE REBOUCHAGE EXPRESSQuick-setting filler for interior and exterior use.

5 kg 160 bags 0.800 t

WhitePRB ENDUIT POLYFONCTIONSMulti-purpose adhesive for sticking plasterboard and panels.

5 kg 160 bags 0.800 t

WhitePRB ENDUIT DE REBOUCHAGEInterior filler.

5 kg

15 kg

160 bags

60 bags

0.800 t

0.900 t

WhitePRB PLÂTRE À MODELERDecoration and moulding work: fireplace hood, statue...

1 kg

5 kg

10 kg

48 boxes of 6 x 1 kg

i.e. 288 bags

60 bags

54 bags

0.288 t

0.300 t

0.540 t

White

PRB PLÂTRE FIN MULTI PURPOSEEmbedding work (junction box, fixing bracket, etc.), filling (grooves, holes), assembly (brick partition walls, plaster block) and repairs.

1 kg

5 kg

10 kg


i.e. 288 bags

60 bags

54 bags

0.288 t

0.300 t

0.540 t



PLASTER SScontinuedPlasterboard specialist - Plasterer (continued)


White

PRB ENDUIT DE RÉPARATION SPECIAL REFURBISHMENTWhite filler and repair compound for interior use.

5 kg 160 bags 0.800 t

White

SOUS COUCHE PLAQUES ET CARREAUX DE PLÂTRESubstrate preparation undercoat prior to painting, wallpapering, etc.

weight10 l 33 tubs 0.462 l

WhitePRB ENDUIT GÉNÉRALUsed to smooth and fill walls and ceilings.

5 kg

10 kg

128 bags

60 tubs

0.640 t

0.600 t

WhitePRB ENDUIT DE LISSAGEPlaster levelling coat for wall and ceiling preparation.

1 kg

5 kg

10 kg


i.e. 288 bags

128 bags

60 bags

0.288 t

0.640 t

0.600 t

White

PRB ENDUIT DE RÉPARATION ALL SUBSTRATESWhite filler and repair compound for outside use.

5 kg 160 bags 0.800 t

White

PRB ENDUIT DE REBOUCHAGE PÂTEInterior filler.

375 g

4 kg

box of 12 tubes

100 tubs 0.400 t

WhiteENDUIT DE LISSAGE PÂTEIdeal skim coat for surface preparation work before painting or covering.

375 g

4 kg

box of 12 tubes

100 tubs 0.400 t


TILING SSPrimers for floor renders


Waterproofing and sealing products

5 kg 128 bags 0.640 tGrey

PRB RAGRÉAGE SOL INTÉRIEUR ET EXTÉRIEURType P3Levelling and finish of exterior and interior floors (garages, balconies, patios, etc.) Application thickness: 3 to 10 mm.

5 kg 128 bags 0.640 tGrey

PRB RAGRÉAGE RAPIDE INTÉRIEUR(PRB PLANIFLASH HP)P4S R ClassQuick-drying levelling compound.Application thickness: 1 to 10 mm.

PRB KIT D’IMPERMÉABILISATION SOUS CARRELAGE(PRÉSERFOND KIT)– 1 l of AG FIXATIVE PRIMER- 6 kg of “UNDER-TILE PROTECTION UNDER-LAYER” resin- 1 reinforced strengthening band ARM 120 Length 10 metres.

Kit for 6 m2

Yellow

SOUS-COUCHE DE PROTECTION SOUS CARRELAGE(PRB PRÉSERFOND)Under-tiling water protection product. Forms a watertight and flexible film.

tub of6 kg

72 tubs 0.432 t

Grey

KIT CEL CÉRAMIC 3 m2

ATEx CSTB n°2220 Swimming poolsATEx CSTB n°2221 Sealing renderUnder-tiling and under-screed liquid sealing system.

8 kg kit Powder 5 kg + Resin 3 kg

Milkywhite

Milkywhite

PRB PRIMAIRE D’ACCROCHAGE(PRB ACCROSOL PLUS)Multi-purpose adhesive primer for floor levelling renders and tiling adhesives.Porous or non-porous substrates, new build and refurbishment.

PRB PRIMAIRE D’ACCROCHAGE ANTI-GOUTTES(PRB ACCROSOL AG)"Non-drip" fixative primer for floor screeds and tiling adhesives.New build and refurbishment. Interior walls and floors.

Jerrican of 1 kg

Jerrican of 1 kg

Jerrican of 5 kg

5 kg

PALBOX



56 jerricans of

64 tubs

0.324 t

0.324 t

0.280 t

0.320 t

Orange+

Clear

PRB ACCROSOL TECHNICTwin-componentWaterproofing epoxy primer for damp-proof course.

Component A resin: 3.150 kg

+Component B hardener:

1.850 kg


0.320 t

Floor levelling

NEW



TILING SSFixing tiling


White

White

White

White

Grey

Grey

Grey

Dark

PRB MORTIER-COLLE CARRELAGE(PRB•COL POUDRE)Class C1 TThick Adhesive Mortar.

PRB MORTIER-COLLENEUF ET RÉNOVATION(PRB•COL FLEX)Class C2 ETHigh performance thick Adhesive Mortar.

PRB MORTIER-COLLEPRISE RAPIDE HP(PRB•COL SPID HP)Class C2 FHigh performance quick-settingadhesive mortar.

PRB MORTIER-COLLEHP PLANCHERS CHAUFFANTS(PRB•COL MONOFLEX HP)Class C2S1 ETVery high performance deformable adhesive mortar.

5 kg

5 kg

5 kg

5 kg

128 bags

128 bags

128 bags

128 bags

0.640 t

0.640 t

0.640 t

0.640 t

3 kg

1 kg

300 g

3 kg

1.5 kg

8 kg

8 kg

110 to


12 tubesper box

110 to

30 boxes of 6 x 1.5 kg

72 tubs

110 to

72 tubs

0.330 t

0.216 t

0.330 t

0.270 t

0.576 t

0.576 t

Off white

Off white

PRB COLLE PÂTE CARRELAGE(PRB•COL PÂTE)Class D1 ETThick adhesive.

PRB COLLE PÂTE PIÈCES HUMIDES(PRB•COL PÂTE PLUS)Class D2 ETSpecial thick adhesive for wet rooms.

8 kg 72 tubs 0.576 tOff

white

PRB COLLE PÂTE HP(PRB•COL PÂTE HP)Class D2 ET as per 12004 standard.Thick, high performance adhesive for very large formats, wet rooms.

3.5 kg

Pal box

0.385 t

White

PRB COLLE ET JOINT2 in 1Adhesive mortar for laying and grouting interior wall and work surface tiling.


TILING SScontinuedTile grouting


1 kg

3 kg

5 kg

192 pots

(32 boxes of 6 x 1 kg)

24 boxes of

4 x 3 kg

128 bags

0.192 t

0.288 t

0.640 t

Grey, White,20 colours

Special colours Class CG1:

Royal Blue, Lemon Yellow, PurpleRed

PRB JOINT FIN CARRELAGE(PRB JOINT FIN)Class CG2 WAThin water repellent mortar with droplet effect for tiling grouting from 1 to 5 mm.

16colours

PRB JOINT LARGE CARRELAGE(PRB JOINT XT)Class CG2 WAWater repellent droplet effect groutingfor tiling grouting from 3 to 15 mm.

5 kg 128 bags 0.640 t

11colours

PRB JOINT SOUPLE CARRELAGE(PRB JOINT SOUPLE)Class CG2 WAFlexible improved grouting for substrates with constraints. 3 to 15 mm joints.

5 kg 128 bags 0.640 t

Grey, White and

9 colours.

PRB JOINT FLEX CARRELAGE(PRB•JOINT RECTIFLEX)Class CG2 WAFine, semi quick-setting, water repellent, flexible grout for rectified tiling, 1 to 8 mm grouting.

5 kg 128 bags 0.640 t

8colours

PRB JOINT HPRClass CG2 WAFast setting flexible grouting mortar3 to 15 mm joints.

5 kg 128 bags 0.640 t

11colours

PRB JOINT CARRELAGE À FORTE RÉSISTANCE(PRB JOINT FR)Class CG2 WAHigh-resistant grouting mortar.for tiling grouting from 2 to 12 mm.Available in 5 kg or 10 kg kit containing 1 mixer bucket containing 2 5 kg bags.

5 kg

Kit 10 kg

(2 x 5 kg)

Pal box

128 bags

22 Kits

0.640 t

0.240 t

Compliant withEN 13188

Compliant with EN 13188






OTHER PRODUCTSFloor treatment

Blue

Colourless

PRB DÉCAPANT CIMENT(PRB ACTIDÉCAP)Acid mix to eliminate render carbonation and to remove cement blooms from tiling.

PRB NETTOYANT DÉCAPANT SPÉCIAL ÉPOXYLiquid stripper for cleaning films and traces of epoxy mortar or paint following works.

5 l

0.250 l

2 l

105 jerricans of

100boxes of

6 jerricans ofx 0.250 l

200 jerricans of

0.525 t

0.156 t

0.400 t



TILING SScontinuedTile grouting (continued)


2.5 kg tub

2.5 kg tub

5 kg tub

5 kg tub

108 tubs(18 boxes

of 6 2.5 kg tubs)

108 tubs(18 boxes

of 6 2.5 kg tubs)

64 tubs(16 boxes

of 4 5 kg tubs)

64 tubs(16 boxes

of 4 5 kg tubs)

0.270 t

0.270 t

0.320 t

0.320 t

10 col.

White and silver grey

White, Grey and

Granite grey

PRB JOINT CARRELAGE ÉPOXYClass R2/RGTwin-component fine epoxy mortar without solvent for the grouting of tiles in wet rooms and aggressive environments.2 to 20 mm joints.Direct bonding on numerous substrates.

PRB COLLE ET JOINT CARRELAGE ÉPOXYClass R2/RGTwin-component epoxy adhesive for bonding and grouting tiles in aggressive environments.Technical bonding on metal, polyester, composite boards.

Granite grey

White


OTHER PRODUCTS continuedAdditives


Milky white 5 l

2 l

5 l

56 jerricans of

24boxes of6 x 2 l

56 jerricans of

0.280 t

0.288 t

0.280 t

PRB ADJUVANT PLASTIFIANTAdditive for floor renders, adhesive mortars and cement grouts.

PRB LATEXAdditive resin for mortars and concretes: strengthens fixative and waterproof properties.

Mastics

White

White

Grey

GreyGrey

AnthraciteWhite

Silver greyClear

Grey,White,Clear

Grey,Grey

Anthracite,White

PRB MASS CRYL PLUSAcrylic masticShore hardness A: 20Ideal for facade sealing, crack repairs, masonry, timber, joinery pointing and joins.

PRB MASS FLEXPolyurethane masticShore hardness A: 25/30Ideal for roofing: tile bonding, pointing, masonry: expansion joint connections, joinery: wood, metal, skirting bonding.

PRB MASS CARRELEURAcrylic-silicone masticShore hardness A: 10Ideal for sealing and finishing joints between tiling and bathroom equipment (bath tubs, showers, wash basins…) and work tops. Easy to smooth using water. Used for edge joints and crack filling.

PRB MASS SIL PLUSFungicide silicone masticShore hardness A: 25Mould resistance (showers, pools, laboratories).Toilet jointsSpecial for swimming poolsUV resistanceVery flexible: extension by 500 %

PRB MASS MSHybrid mastic and sealing adhesiveShore hardness A: 55Partitioning and expansion joints. Bonding Sealing jointsTechnical joints: application on damp bases and substrates (technical rooms, facades, patios)Stable to UVs

Volume 310 ml

Gross weight 572 g

Volume 310 ml

Gross weight 418 g

Volume 310 ml

Gross weight 389 g

Volume 300 ml

Volume 290 ml

48 boxes of 24 cartridges, i.e.

1152 cartridges


1152 cartridges


1152 cartridges


1152 cartridges


1152 cartridges

658.94 kg

481.36 kg

448.128 kg


9 • THRESHOLDS, SUPPORTS & CORNICES

EPS RENDERSupports

Bands

Guides

PackagingName & Use

STPPOTAPP200 STY POT 200G EPS SUPPORT SIDE FINISH 1 U

STPAPP390800 STY EWI SUPPORT 390X800 EPS FROM 60 TO 200MM 1 U











STPBAN70C4 STYLPROFIL BAND 140X70X1200MM C4 1 U




STPBAN35M1 STYLPROFIL BAND 150X35X1200MM M1 1 U





STPCLEV260M1 STYLPROFIL KEYSTONE 260X220X50MM M1 1 U

STPGUIL300M1 STYLPROFIL GUIDE L 300X50X50MM M1 1 U




EPS RENDER continuedCornices

PackagingName & Use

STPCOR150M1 STYLPROFIL CORNICE 150X150X1200MM M1 1 U







PackagingName


9 • THRESHOLDS, SUPPORTS & CORNICES continued

CONCRETEThresholds and supports

Chrono threshold elegance door

Chrono threshold elegance window

THE COLOURS (colours given as an indication)

White Beige

THE FINISHES

Styl Support

In stock On order

THRESHOLD CHRONO DOOR 800 DEPTH 34 1 U











THRESHOLD CHRONO WINDOW 1800 DEPTH 36 1 U




SUPPORT PR 800 (DEPTH 30 CM) 1 U











SUPPORT SPEED 400 (DEPTH 36 CM) WHITE 1 U

SUPPORT SPEED 400 (DEPTH 36 CM) GREY/BEIGE 1 U





























ACCESS PROFILE 1500MM 1 U

STYL KIT SUPPORT JOINT 1 U

STYL KIT PROTECTION FILM (PAQ = 12 FILMS) 1 U

Non-slip finish

Decorative border


10 • OTHER

TOOLS AND CONSUMABLESCombs and tiler kits PackagingName & Use

KIT 2 COMBS 1 U

PRB COMB 1 U

A1 COMB - 185 MM FOR PLANIPHONE 19 1 U

A2 COMB FOR SOUNDPROOFING KIT 1 U

V6 COMB 13 X 28 CM 1 U

U6 COMB 13 X 28 CM 1 U

U9 COMB 13 X 28 CM 1 U

1/2 MOON COMB 20 X 9MM 1 U

1/2 MOON COMB 20 X 15MM 1 U

SPECIAL GROUT KIT, CLEANING TRIO FOR GROUTING 1 U

TILER’S CLEANING KIT 1 U

SPECIAL EPOXY JOINT KIT 1 U


10 • OTHER continued

Levels

TOOLS AND CONSUMABLES continuedFloats PackagingName & Use

BEVELLED WOOD LEVEL 1.50 M 1 U

BEVELLED WOOD LEVEL 3.00 M 1 U

SMOOTHING ALU H 1.00 M 1 U

SMOOTHING ALU H 1.50 M 1 U

NOTCHED ALU H 1.20 M 1 U

NOTCHED ALU H 1.80 M 1 U

SCRAPER FLOAT 34X26 1 U

SINGLE SCRAPER FLOAT 15 X 24 1 U

SINGLE SCRAPER FLOAT 15 X 25 1 U

FLOAT MESH 1 U

ABS FLOAT 34X23 1 U

ABS FLOAT 27X18 1 U

EPOXY FLOAT 10 X 25 CM 1 U

EPOXY FINISH FLOAT 11 X 23 CM 1 U

EPOXY FINISH FLOAT FELT- PER 10 1 PAQ

SPONGE FLOAT 14 X 25 1 U

SPONGE FLOAT RECHARGE 14X25 1 U

POLYSTYRENE 27X15 FLOAT 1 U


TOOLS AND CONSUMABLES continuedRendering tools

Floats

Trowels

Miscellaneous containers

PackagingName & Use

STAINLESS STEEL SKIMMING TROWEL 14CM 1 U

STAINLESS STEEL SKIMMING TROWEL 50 CM 1 U

STAINLESS STEEL SKIMMING TROWEL 60 CM 1 U

STAINLESS STEEL STUCCO TROWEL 13 CM 1 U

STAINLESS STEEL SCREED TROWEL 45 X 12 1 U

PLASTIC SANDING TROWEL 28X13 1 U

SINGLE-HANDED STAINLESS STEEL FLOAT 28X12 1 U

TWO-HANDED STAINLESS STEEL FLOAT 50X14 1 U

ITAL 16 STEEL TROWEL 1 U

STAINLESS STEEL ROUND ITALIAN TROWEL SIZE 22 1 U

STAINLESS STEEL TRIANGULAR TROWEL SIZE 16 1 U

PRB MIXING BUCKET 32 L 1 U

DOSING BUCKET 12 L 1 U

PW MIXING BUCKET 32 L 1 U


10 • OTHER continued

TOOLS AND CONSUMABLES continuedAdhesive tape

Protective films

PackagingName & Use

PAPER ADHESIVE MASKING TAPE AT 6300 48MMX50M Box of 24 ROLLS

PAPER ADHESIVE MASKING TAPE AT 6300 96MMX50M Box of 24 ROLLS

CLEAR ADHESIVE TAPE 50X100 1 ROLL

VINYL ADHESIVE TAPE AT42 50MMX33MM Box of 36 ROLLS

VINYL ADHESIVE TAPE AT6150 EN 50MMX33M 1 ROLL


VINYL ADHESIVE TAPE AT6150 EN 75MMX33M 1 ROLL


BARNIER ADHESIVE 6095 48MMX33M (36 ROLLS) 1 BOX

BARNIER ADHESIVE 6095 72MMX33M (24 ROLLS) 1 BOX

FLEX XTRA ADHESIVE 48MMX33M (36 ROLLS) 1 BOX

REINFORCED ORANGE ADHESIVE AT6190-50MMX33M 1 ROLLS

POLYANE SMALL ROLL 3 M TYPE 150 RL 160 M2 1 ROLLS

POLYANE LARGE ROLL 3 M TYPE 150 RL 340 M2 1 ROLLS

POLYANE LARGE ROLL 6 M TYPE 150 RL 340 M2 1 ROLLS


NOTES


11 • PRB PRODUCT INDEX

100 R ....................................................................................................................132 IN 1 POWDER MORTAR AND GROUT ......................................................................314 x 4 GLASS FABRIC HOLLOW GROUT ......................................................................216000 R ....................................................................................................................985 H ........................................................................................................................985............................................................................................................................9ACCELERATOR ........................................................................................................13ACCROFIX PÂTE .......................................................................................................14ACCROFIX ...............................................................................................................14ACCROFOND I .........................................................................................................35ACCROSOL AG ........................................................................................................27ACCROSOL PLUS.....................................................................................................27ACCROSOL TECHNIC DRY SAND ...............................................................................25ACCROSOL TECHNIC ...............................................................................................26ACTIDÉMOUSSE FLASH ...........................................................................................13ACTIDÉMOUSSE HP .................................................................................................13ADHESIVE & GROUT “2 IN 1” ...................................................................................32ADHESIVE FOR INSULATION ACCESSORY FIXING .......................................................21AIR-SLAKED LIME ....................................................................................................40ALG GRAIN FIN ..........................................................................................................9ANCHOR CAP ..........................................................................................................15ARM 120 STANDARD REINFORCEMENT TAPE ............................................................29ARMACEL ...............................................................................................................29ARMAPHONE GLASS FABRIC 4 X 4 ...........................................................................29ASSEMBLY MORTAR ................................................................................................39ASSEMBLY PANELS .................................................................................................23AVE ........................................................................................................................21AVN ........................................................................................................................21AVR ........................................................................................................................21BELLE ÉPOQUE FINITION GM/GF ..............................................................................51BELLE ÉPOQUE SUB-RENDER .....................................................................................8BLACK PU ASSEMBLY CYLINDER ..............................................................................22BOX HOLE FOAM .....................................................................................................15BRIDGING TAPE BP 100. ..........................................................................................29BRIK GROUT ...........................................................................................................34CASE OF INSULATING ACCESSORY FIXING SAMPLES .................................................24CEL CÉRAMIC .........................................................................................................28CELLUPOSE ............................................................................................................39CEMENT STRIPPER (ACTIDÉCAP) ........................................................................ 13/54CERAMIC MAT .........................................................................................................29CHAPECEM HPR ......................................................................................................27CHAPECEM N ..........................................................................................................27CHAPECEM TRADI ...................................................................................................27CLASSIC F ................................................................................................................8COL DUO FLEX ........................................................................................................32COL DUO MAX ........................................................................................................32COL FLEX ................................................................................................................31COL FLUID HPR .......................................................................................................32COL FLUID N ...........................................................................................................32COL FLUID SCA .......................................................................................................32COL MONOFLEX HP .................................................................................................32COL PÂTE ALG ........................................................................................................32COL PÂTE PLUS ......................................................................................................32COL PÂTE PRO ........................................................................................................32COL PÂTE ...............................................................................................................32COL POUDRE ..........................................................................................................31COL POUDRE ..........................................................................................................31COL PRO ................................................................................................................31COL SCEL ...............................................................................................................32COL SCEL ...............................................................................................................33COL SPID HP ..........................................................................................................31COL TECHNIK ..........................................................................................................33COL TERRASSE .......................................................................................................31COL TOP .................................................................................................................32COL WHITE .............................................................................................................31COL WOOD .............................................................................................................15COLOR ACRYL FLEX .................................................................................................36COLOR ACRYL .........................................................................................................35COLOR IMPER & COLOR IMPER MAT ........................................................................36COLOR LITE HYDRO.................................................................................................36COLOR MAT INTÉRIEUR AIRLESS ..............................................................................35

COLOR MAT INTÉRIEUR PRO ....................................................................................35COLOR MINÉRAL PLUS ............................................................................................35COLOR SILOCRYL ....................................................................................................36COLOR SILOFLEX.....................................................................................................36COLOR SILOXANE ....................................................................................................36COLOR SYSTEM PIGMENT ................................................................................. 12/48COLOR TOPFLEX ......................................................................................................36COLOR VELOUTÉ INTÉRIEUR PRO .............................................................................35COMPRIMOUSSE IMPREGNATED ..............................................................................15CONCRETE THRESHOLDS AND SUPPORTS ................................................................58CONCRETE..............................................................................................................40CORNER BEAD ........................................................................................................14CORNER BEADS ......................................................................................................14CRÉPICHAUX SC & F ...............................................................................................10CRÉPIFOND F OR G .................................................................................................35CRÉPIFOND MINÉRAL G ...........................................................................................35CRÉPILIS SC and F ..................................................................................................37CRÉPIMUR F, M and G .............................................................................................37CRÉPIMUR F, M and G .............................................................................................38CRÉPIRIB F and G ...................................................................................................37CRÉPISIX M ............................................................................................................37CRÉPITAL ................................................................................................................10CRÉPIXATE F and M .................................................................................................38CRÉPOXANE F and M ...............................................................................................37CRYSTAL WHITE ........................................................................................................9CUSTOMISABLE STAMP ...........................................................................................12DRILLING CASE FOR ASSEMBLY CYLINDERS .............................................................22DRILLING CASE FOR ASSEMBLY CYLINDERS .............................................................22DRIP GROOVE STARTER PROFILES ............................................................................16ÉCOTWIST ANCHOR ................................................................................................ 20ELECTRIC BOX SUPPORT .........................................................................................21ELEMENTS TO FIX GUARD RAILS ..............................................................................23EP 14 .......................................................................................................................8EP 18 .......................................................................................................................8EPI/SPEC CÉRAMIC MAT..........................................................................................29EPOXY ADHESIVE AND GROUT .................................................................................33EPOXY TILING GROUT ..............................................................................................34EPS BASEM. INSUL. TH35 .......................................................................................44EPS CUTTING TOOL .................................................................................................23EPS FACADE TH31 (GREY) .......................................................................................43EPS FACADE TH38 (WHITE) ......................................................................................42EPS R TH38 (WHITE GROOVED) ...............................................................................43EPS RENDER (SUPPORTS, BANDS, GUIDES, CORNICES) ........................................... 56ERGONOMIC ROLLER FOR PATTERNS ........................................................................12EWI INSUL HINGE ....................................................................................................43EWI REINFORCEMENT PANELS .................................................................................25EXPANSION BEADS ..................................................................................................18EXPRESS CONCRETE ...............................................................................................40FIBRE CONCRETE ....................................................................................................40FIBRE SCREED MORTAR ..........................................................................................27FINE GROUT ............................................................................................................31FINICHAUX ................................................................................................................9FINIDUR ..................................................................................................................27FIXING PATCH ..........................................................................................................21FIXO DPA ................................................................................................................38FIXOMUR TDV .........................................................................................................38FIXOPRÈNE .............................................................................................................38FIXOSUP .................................................................................................................38FIXOTECH ...............................................................................................................38FLASH ACCELERATOR ..............................................................................................13FONDICHOC ............................................................................................................15FONDISOL F ............................................................................................................15FONDISOL PE ..........................................................................................................15FR GROUT...............................................................................................................34HAMMER-IN ANCHOR 6X40 MM ...............................................................................19HINGE BODIES TO FIX, SHUTTER STOPS AND FASTENERS .........................................24HINGE FIXING ELEMENTS.........................................................................................24HOLLOW JOINTER FOR DOUBLE JOINT 40127 ...........................................................12HOLLOW JOINTER FOR ROUND JOINT 40232 ............................................................12HOLLOW JOINTER FOR SQUARE JOINT 40233 ...........................................................12HOLLOW JOINTER FOR THIN DOUBLE JOINT 40133 ...................................................12


HPR GROUT ............................................................................................................34HYDRO + INSULATION ANCHOR ................................................................................19HYDRO INSULATION ANCHOR ...................................................................................19IMPERFOND ............................................................................................................41INNER CORNER GLASS CLOTH SQUARE ....................................................................21INNER CORNER SPEC ..............................................................................................29INSULATION TAPE 100 SC 19 ..................................................................................29INSULATION WOOD SCREW ......................................................................................20ISOPLAST 2301 S / SRC .........................................................................................26JOINERY CONNECTION PROFILES .............................................................................19KIT 3 STYLSCHISTE FINISH PATTERNS ......................................................................11KIT 5 STYLBOIS FINISH PATTERNS ...........................................................................11KIT 6 STYLBRIK FINISH PATTERNS ............................................................................11LANDSCAPING MORTAR ...........................................................................................10LATEX .....................................................................................................................13LAYOUT FOAM .........................................................................................................15LDR 431 & PRB LDR ROCKBAY ................................................................................45LDR ÉCOROCK ........................................................................................................45LDR ISO TF .............................................................................................................45LE MANUEL ..............................................................................................................9LIGHTWEIGHT SCREED MORTAR 650 ........................................................................27LOOK .......................................................................................................................9MANUCEM HPR .......................................................................................................28MANUCEM N ...........................................................................................................28MANUCEM TRADI ....................................................................................................28MANUPRO ..............................................................................................................10MARBRO MURO ......................................................................................................37MASS CRYL PLUS ...................................................................................................55MASS FLEX .............................................................................................................55MASS MS ...............................................................................................................55MASS SIL PLUS ......................................................................................................55MASS TILER ............................................................................................................55MESHED CORNER BEADS ........................................................................................18MULTIPOSE .............................................................................................................39NE34 SAND ............................................................................................................12OPEN V BEADS .......................................................................................................18OPUS GROUT ..........................................................................................................34OUTER CORNER SPEC .............................................................................................29OZÉ ..........................................................................................................................9PERFORATED V BEADS ............................................................................................18PERIPHERAL BP 50 50 X 3 ......................................................................................31PHONIC INSULATION BOARD ....................................................................................31PLANIDRESS F & G .................................................................................................41PLANIDRESS TOP G .................................................................................................41PLANIDUR HP..........................................................................................................26PLANIDUR PLUS ......................................................................................................26PLANIDUR PRO .......................................................................................................26PLANIDUR ...............................................................................................................26PLANIFIBRE SR .......................................................................................................27PLANIFIBRE .............................................................................................................27PLANIFORT ..............................................................................................................27PLANIJOINT SOUPLE FIBRÉ ......................................................................................41PLANIMUR PÂTE F & G ............................................................................................41PLANIMUR TOP F .....................................................................................................41PLANIPHONE 19 ......................................................................................................30PLANISOL FIBRÉ ......................................................................................................27PLANISPID RÉNO .....................................................................................................27PLANISPID ..............................................................................................................26PLASTIFIER .............................................................................................................26PLON PLON CONCRETE ...........................................................................................40POLYDIANE + THIXO ................................................................................................25POLYDIANE + ..........................................................................................................25POLYURETHANE FOAM .............................................................................................15POSE BLOC C .........................................................................................................39POSE BLOC R .........................................................................................................39POSE TUILES ..........................................................................................................39POSEMER ...............................................................................................................41PREDALLE GROUT ...................................................................................................39PRÉSERFOND..........................................................................................................28PRIMFIX ..................................................................................................................35PU ASSEMBLY BLOCKS ..................................................................................... 22/23

PVC DRIP GROOVES ................................................................................................16PVC FLASHING SUPPORT PROFILE / CERAMIC COATED CONNECTION .........................19QUICK-SETTING MORTAR .........................................................................................39RECTIFLEX GROUT ...................................................................................................33RÉFRACPOSE ..........................................................................................................39REINF. POLYDIANE TAPE ..........................................................................................25REINFORCEMENTS ..................................................................................................14RENDER STOP PROFILES .........................................................................................18RÉNOMUR PASTE ....................................................................................................10RÉNOMUR POWDER ................................................................................................10RÉNOMUR TOP .......................................................................................................10RETARDANT ............................................................................................................13ROCKWOOL LDR TF FIRE BARRIER BAND ..................................................................45ROLLER FOR PATTERNS ...........................................................................................12SAINT JACQUES LIME ..............................................................................................40SC 150 ....................................................................................................................8SC GREY ..................................................................................................................8SCREW-IN ANCHOR FOR INSULATION ........................................................................20SE LIGHTWEIGHT ......................................................................................................8SEALING MEMBRANE ..............................................................................................29SEPARATING BEADS ................................................................................................18SINSOL 10 R ..........................................................................................................25SM 200 SEALING TAPE ............................................................................................29SOUCHAPE 19 ........................................................................................................29SPEC BOARD ..........................................................................................................29SPEC STRENGTHENED REINFORCEMENT TAPE ..........................................................29SPECIAL EPOXY CLEANER STRIPPER ........................................................................54SPIRAL ANCHOR .................................................................................................... 21SR ADDITIVE ...........................................................................................................38STEEL PASSIVATOR ..................................................................................................44STYLBAMBOU PATTERN 40 X 110 CM ......................................................................11STYLBOIS PATTERN 45 X 100 CM ............................................................................11STYLBRIK PATTERN 42 X 120 CM ............................................................................11STYLDÉCOR ............................................................................................................10STYLPIERRE BRETAGNE STENCIL KIT ........................................................................11STYLPIERRE HERITAGE STENCIL KIT .........................................................................11STYLPIERRE TRADITION STENCIL KIT ........................................................................11STYLSCHISTE PATTERN 47 X 130 CM .......................................................................11SUPERBRUT SUB-RENDER .........................................................................................8SUPERBRUT ..............................................................................................................9SUPPLE GROUT .......................................................................................................33THERMICOL ............................................................................................................15THERMOLOOK GF / GM ...........................................................................................25TOOLS AND CONSUMABLES (COMBS, GROUTING KITS, FLOATS, LEVELS, ETC.) ..........59TOPFLEX GROUT......................................................................................................13TOPJOINT................................................................................................................34TP EDGE ADHESIVE .................................................................................................40TP RÉPAR R4 / R4 PR .............................................................................................41TPC INSULATION ANCHOR ........................................................................................19TRADI GP ..................................................................................................................8TRADI H ....................................................................................................................9TRADICLAIR 170 .......................................................................................................8TRADICLAIR 190 L / FIBRED ......................................................................................8TRADICLAIR PR .........................................................................................................9TRADITAL SUB-RENDER .............................................................................................8TRADITAL ..................................................................................................................9TRADITIONNEL 160 ...................................................................................................8TREILMET 12.5 X 12.5 ............................................................................................21TYROLEAN FACADE RENDER ....................................................................................10U PROFILE FOR PANELS ...........................................................................................25UNDER-TILE WATERPROOFING KIT ............................................................................28VICAT® QUICK-SETTING CEMENT ..............................................................................40WATER REPELLENT WRS ..........................................................................................13WATER REPELLENT ..................................................................................................13WATERPROOFING MORTAR .......................................................................................41WHITE CEMENT .......................................................................................................40WHITE EPS ASSEMBLY CYLINDER ............................................................................22WIDE GROUT...........................................................................................................33XT GROUT ...............................................................................................................33


NOTES

PRB develops solutions for all professionals!

Products that withstand the test of time.

Check out our PRB PRODUCT lines for interior and exterior use.

Facade specialist & Mason Tiler Painter & flooring specialist E.W.I. Self Service

www.prb.fr

Products that wi ths tand the tes t o f t ime. . .

www.prb.fr

16 rue de la Tour - CS 1001885150 LES ACHARDS

Tel. Switchboard: +33 (0)2 51 98 10 10

OFF

SET

PR

INTI

NG

FIF

TH E

DIT

ION

• 0

2 5

1 9

4 7

9 1

4

20

17020489 •

MA

RC

H 2

017