BRO_Senior Orifice Fitting_DAN-DIF-TG-11-1003_2003-10_EN

Senior®® Orifice Fitting Technical Guide

Technical GuideDAN-DIF-TG-11-1003October 2003 Senior Orifice Fitting

www.daniel.com

2

Daniel Senior®® Orifice FittingThis fitting provides a fast, safe and extremely simplemethod of changing orifice plates under pressure without interrupting line flow. It eliminates costly by-passes, valves and other fittings required with conventional orifice flange installations.

Available in 2" through 48" line sizes, up to Daniel 2500flanged, and 10,000 psi (68958 kPa).

Meets all requirements and recommendations for accurate flow measurement of gas and liquid, includingAGA 14.3 requirements without compromise; full betarange; no uncertainty needs to be added to published values. AGA 14.3 retrofit available. "Soft Seal" optionavailable for ultra-tight sealing of gas products such asethylene.

Technical GuideDAN-DIF-TG-11-1003October 2003

3

DANIEL SENIOR®® ORIFICE FITTINGCATALOG NUMBERING SYSTEM

NOMINAL LINE SIZE

INTERNAL DIAMETER

FITTING STYLE01 Raised Face FlangnekTM

10 Raised Face Flanged18 Welding Neck014 Ring Joint FlangnekTM

14 Ring Joint Flanged

Daniel 1 150#3 300#5 600#6 900#7 1500#8 2500#

ORIFICE PLATE SEAL MATERIALDSC Removable Dual Seal*(up to 10")3DVS Dual Vulcanized Seal*(12" and up)TSC Removable Teflon Seal (up to 24")MSC Removable Metal Seal (up to 24")SNC Removable Snap Seal*(up to 20")

INTERNAL TRIM MATERIAL"A" Standard"AASG" Sour Gas/Corrosive ServiceNACE

WHEN ORDERING, PLEASE SPECIFY:1. Catalog Number2. Plate Material3. Plate Bore(s)4. Quantity

*Patented

Note: All products and components are subject tochange without notice in a continuing effort ofproduct improvement.

6" (6.065) 01 5 DSC "A"


4

Flanged FlangnekTM WeldnekTM

Operational sequence of removing an orifice plate under pressure


5

Special Features

Orifice Plate Sealing Units, designed and patented byDaniel, give positive seal between orifice plate andbody seats. Available for a variety of services.

Plate Carrier protects orifice plate at all times whileinserting or removing from fitting.

Top Outside Guide Brackets with pinion and rollerassembly are standard equipment on 18-inch and largerSenior Orifice Fittings. Orifice plates can be inspectedor changed without disengaging plate carrier from pinions.

Indicator Plate clearly shows the position of the slidevalve within the fitting.

Teflon Shaft Packing and Centering Rings arestandard equipment on all Daniel Senior Orifice U.C. Fittings in all sizes and ratings.

Fittings up to and including 12" line size can operate ina vertical down flow condition or positioned in horizontal flow for side opening.

Compact Design requires minimum operating space.

All Daniel Senior Orifice Fittings are designed andmanufactured to meet latest API/AGArecommendations, and in strict accordance with latestA.S.T.M. specifications.

6

Special FeaturesHigh Pressure Fittings

DOUBLE ROW SET SCREWS(CONSTRAINING FORCEDIRECTLY OVER GASKET)

EXTRA HEAVYCLAMPING ANDSEALING BARS

THIN SECTION ON INTERNALEDGE FOR FLEXIBLE LIP SEAL,YIELDING EASILY TO PRESSURE

HEAVY SECTION ON EXTERNAL EDGE TOPREVENT COMPRESSIONDRIFT BETWEEEN JOINT

FORCE EXERTED ONSURFACE TENDING TOCHANGE ITS SHAPEWILL NOT AFFECTGASKET SEAL

CONSTANT PRESSURESEALS GASKET AT ALLTIMES

DANIEL “COMPO-FLEX”SEALING BAR GASKET

ALLOY STEEL STUDS

CORROSION RESISTANTVALVE SEAT

HEAVY WALL SECTIONS

OVERSIZE STUFFING BOX UNITS

PARTIAL SIDE SECTIONAL ELEVATION

Daniel 1500Daniel 2500 (See Note A)

The drawing above shows in detail the extra-heavy construction of the wall sections and essential parts onthe Daniel 1500 Senior Orifice Fitting.

NOTE: Body/Top Gasket-peroxide cured Nitrile O-ringfor Daniel 1500 Orifice Fittings. Male and female gas-ket joint with Parker seal gaskets for Daniel 2500Orifice Fitting.

"TS" (All-Teflon) Orifice Plate Sealing Unit is standard inDaniel 900, 1500, and 2500 fittings.

Daniel Method of Aligning Meter TubeFlange to Orifice Fitting Flange

METER TUBE FLANGE FITTING FLANGE

Daniel 125 thru 300 Daniel 400 and higher

On all sizes, Daniel 300 or under, three dowel pinflange-alignment holes are drilled in the flanges.

Daniel 400 or higher, flanges are manufactured withclose-tolerance, square-shouldered, large male flange-facing on fitting and large female flange-facingon meter tube to assure proper internal alignment.Flange gaskets are precision-cut so that under compression they will not extend into internal bore of fitting. Refer to engineering drawing above.

In Daniel Senior Orifice Fittings, the valve seat (Part No.18) is a part of the upper chamber. The valve strip(Part No. 3) moves underneath this seat, thus utilizingline pressure to affect a positive seal. The valve strip ismaintained in "floating" position by minimum springpressure.

Before slide valve is opened, it is lubricated through

grease gun (Part No. 23). Pressure is then equalizedthroughout the entire fitting by operation of the equalizer valve (Part No. 1). Equalized pressure onboth sides of the valve strip allows slide valve to movefreely without wear. Valve seat and valve strip areground for tight shut-off and are easily removable forgrinding if required.

SLIDE VALVE DETAILCONTINUOUS GREASE GROOVE(Encircle Valve Opening)

EQUALIZER PASSAGEWAYS

EQUALIZERVALVE(Part No. 1)

VALVE STRIP(Part No. 3)

LOWER COMPARTMENT

UPPER COMPARTMENT

GREASE GUN(Part No. 23)

VALVE SEAT

(Part No. 18)VALVE

CARRIER(Part No. 17)

Clearance pad preventsValve from being closeduntil plate carrier is fully

centered in the line.

7

Standard Specifications

Meter Taps: All Daniel Orifice Fittings are providedwith two sets of "Flange Taps," located in accordancewith latest API 14.3 (AGA Report #3) recommendations.

Flange Tap Specifications: Flange tap meterconnections are ½" N.P.T. Internal tap hole sizes followlatest API 14.3 (AGA Report #3) recommendations.Internal edges of tap holes are free from burrs andsquare edged.

Line Bore Tolerances: 2-inch and 3-inch sizes, plusor minus .003", 4, 6, 8, 10-inch sizes, plus or minus.004"; 12-inch and 14-inch plus or minus .005". Unlessotherwise specified, all fittings are furnished withstandard internal line bore as listed in dimensionaltables.

Operating Shafts: On sizes 2-inch to 14-inch inclu-sive, single end operating shafts are standard on leftside of fitting when looking downstream. On sizes 16-inch and larger, operating shafts on both sides of fittingare standard.

The Senior Orifice Fitting is composed of two independent compartments separated by a hardenedstainless steel slide valve.

Side sectional view below left shows the slide valve inclosed position and orifice plate concentric in line offlow. Slide valve cannot be closed unless orifice is concentric to bore of fitting, or in upper chamber duringplate removal.

Photo, below right, shows the Daniel top closure inopened position with plate carrier in place for change orinspection of orifice plate. Only a few turns of thespeed wrench are required to loosen screws to removeor replace clamping and sealing bars. Set screws

always remain in clamping bar. This feature addsgreatly to speed and ease of operation.

Plate carrier is raised and lowered by double rack andpinion mechanism with power applied through speedwrench. This method provides the quickest means ofoperation with the least amount of effort and assurespositive control of plate carrier at all times.

All parts, including the essential slide valve assembly,may be replaced or repaired without removing fittingfrom line.

Temperature Units: Standard trim fittings Daniel 150-900 are suitable for -20 to +450°F service. Daniel 1500and 2500 are suitable for service in -20 to +275°F.However, the Orifice Plate Seal used may limit the service temperatures. Special trims and seals areavailable for higher or lower temperature service.Please consult factory.

Indicator Plates: Standard on all Senior OrificeFittings, this plate clearly shows the direction of theopen and close position of the Slide Valve.

Operating Wench: A speed wrench is provided witheach fitting for quick operation of the shaft and pinions, equalizer valve, grease gun, bleed valve andclamping bar screws.

Hydrostatic Testing: All Daniel Senior Orifice U.C. Fittings are hydrostatically tested to 1.5 timesoperating pressure.

Plate Alignment: The plate carriers in all SeniorOrifice Fittings are centered using a fixed three pointpositioning system. This assures concentricity withinthe fitting in accordance with the latest API 14.3 (A.G.A.Report #3).

SIDE SECTIONAL VIEW

8

FLANGNEKTM - RAISED FACE 2”-14” Daniel 150-900

Dia

m. I

nter

nal L

ine

Bor

e

Ups

tream

Fac

e of

Orif

ice

Pla

te to

Fac

eof

End

Dow

nstre

am F

ace

ofO

rific

e P

late

to F

ace

of E

nd

Ove

rall

Face

to F

ace

Ope

ratin

g C

lear

ance

From

Cen

ter

Bod

y C

lear

ance

From

Cen

ter

Cen

terli

ne to

Bot

tom

Cen

terli

ne to

Top

Cle

aran

ce fo

r Pla

teC

hang

ing

Dia

met

er fo

Fla

nge

Dia

mer

ter o

f Bol

tC

ircle

Dia

met

er o

f Rai

sed

Face

+.0

00 -.

005

Hei

ght o

f Rai

sed

Face

Flan

ge T

hick

ness

Num

ber a

ndD

iam

eter

of B

olts

or

Stud

s (P

er F

lang

e)

Leng

th o

f Bol

ts (S

q.H

ead

with

Hex

. Nut

)

Leng

th o

f Bol

t-Stu

dsw

ith 2

Hex

. Nut

s

Dia

met

er o

f Hub

at

Poi

nt o

f Wel

ding

Siz

e of

Dra

in P

lugs

Orif

ice

Pla

teTh

ickn

ess

App

rozi

mat

e W

eigh

t(P

ound

s)

SIZE A B C D F G H I I1 J K L M N O P R SIZECatalog No. 011DS-Daniel 150 -Dual Seal

23468

101214

2.0673.0684.0266.0658.071

10.13612.09013.250

5 1/45 5/165 7/165 9/166 1/8 6 3/87 3/87 3/8

5 1/45 5/165 7/165 9/166 1/86 3/86 3/87 3/8

10 5/810 3/4

1111 1/412 1/2

131415

12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8

4 1/45 3/85 7/86 3/4

89

10 3/411

3 3/44

4 1/25 1/26 3/4

89 1/2

10 1/2

13 1/414 1/215 3/418 3/421 3/424 7/8

2831 5/8

5 9/166 1/16

7911

13 1/81517

67 1/2

911

13 1/2161921

4 3/46

7 1/29 1/211 3/414 1/4

1718 3/4

3 5/85

6 3/168 1/2

10 5/812 3/4

1516 1/4

1/161/161/161/161/161/161/161/16

3/415/1615/16

11 1/8

1 3/161 1/41 3/8

4- 5/84- 5/88- 5/88- 3/48- 3/4

12- 7/812- 7/8

12- 1 1/8

2 3/433

3 1/43 1/23 3/4

44 1/4

3 1/43 3/43 3/4

44 1/44 3/44 3/45 1/2

2.3753.5004.5006.6258.625

10.75012.75014.000

1/21/23/43/43/43/43/43/4

1/81/81/81/81/41/41/41/4

100140185265345465655945

23468

101214

Catalog No. 013DS-Daniel 300 -Dual Seal23468

101214

2.0673.0684.0266.0658.071

10.13612.09013.250

5 1/45 1/26 1/4

615/166 7/88 1/88 7/89 3/8

5 1/45 1/25 5/8

6 15/166 7/87 1/87 7/89 3/8

10 5/811 1/8

121414

15 1/21719

12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8

4 1/45 3/85 7/8

789

10 3/411

3 3/44 1/8

56 1/47 1/28 3/4

10 1/411 1/2

13 1/414 1/215 3/418 3/421 3/424 7/8

2831 5/8

5 9/166 1/16

7911

13 1/815

17 9/16

6 1/28 1/4

1012 1/2

1517 1/220 1/2

23

56 5/87 1/8

10 5/813

15 1/417 3/420 1/4

3 5/85

6 3/168 1/2

10 5/812 3/4

1516 1/4

1/161/161/161/161/161/161/161/16

7/81 1/81 1/4

1 7/161 5/81 7/8

22 1/8

8- 5/88- 3/48- 3/4

12- 3/412- 7/816- 1

16- 1 1/820- 1 1/8

33 1/23 3/44 1/44 3/45 1/45 3/4

6

3 1/24 1/44 1/24 3/45 1/26 1/46 3/4

7

2.3753.5004.5006.6258.625

10.75012.75014.000

1/21/23/43/43/43/43/43/4

1/81/81/81/81/41/41/41/4

10015020033048061511101105

23468

101214

Catalog No.15DS-Daniel 600 -Dual Seal23468

101214

2.0673.0684.0266.0657.981

10.02011.93813.125

5 1/46 15/166 9/167 15/16

8 5/89

9 13/1610 1/4

5 1/46 15/166 9/167 15/16

8 5/88

8 13/1610 1/4

10 5/814

13 1/416

17 1/217 1/418 7/820 3/4

12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8

4 1/45 3/86 1/8

789

10 3/411 7/8

3 3/44 1/85 3/8

78 1/4

1011

11 7/8

13 1/414 1/215 3/418 3/421 3/424 7/8

2831 5/8

5 9/166 1/16

7911

13 1/815

17 9/16

68 1/4

10 3/414

16 1/22022

23 3/4

56 5/88 1/211 1/213 3/4

1719 1/420 3/4

3.6255.0006.1888.500

10.62512.75015.00016.250

1/41/41/41/41/41/41/41/4

1 1/41 1/21 3/42 1/8

2 7/162 3/42 7/8

3

8- 5/88- 3/48- 7/812- 1

12- 1 1/816- 1 1/420- 1 1/420- 1 3/8

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

4 1/45

5 3/46 3/47 3/48 1/28 3/49 1/2

2.3753.5004.5006.6258.625

10.75012.75014.000

1/21/23/43/43/43/43/43/4

1/81/81/81/81/41/41/41/4

105160265400595745

12151475

23468

101214

Catalog No.016TS-Daniel 900 -Teflon Seal23468

101214

††††††††

6 15/166 15/167 13/168 9/169 1/16

10 13/1611 9/1611 1/16

6 15/166 15/167 1/167 15/169 1/16

10 13/1611 9/1611 1/16

141415

16 5/818 3/821 7/823 3/822 3/8

12 7/813 3/414 1/815 1/217 1/418 3/820 3/8

21

5 3/45 3/86 1/8

79 1/8

1112

12 3/8

4 1/44 3/45 3/47 1/29 1/4

10 3/412

12 3/16

13 3/414 1/215 3/418 3/421 3/424 7/8

2831 11/16

5 9/166 1/16

7911

13 1/815

17 9/16

8 1/29 1/211 1/2

1518 1/221 1/2

2425 1/4

6 1/27 1/29 1/4

12 1/215 1/218 1/2

2122

3.6255.0006.1888.500

10.62512.75015.00016.250

1/41/41/41/41/41/41/41/4

1 3/41 3/4

22 7/162 3/4

33 3/83 5/8

8- 7/88- 7/8

8- 1 1/812- 1 1/812- 1 3/816- 1 3/820- 1 3/820- 1 1/2

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

5 3/45 3/46 3/47 3/48 3/49 1/4

1011 1/4

2.3753.5004.5006.6258.625

10.75012.75014.000

1/21/23/43/43/43/43/43/4

1/81/81/81/81/41/41/41/4

205215300490

1095155519352115

23468

101214

† To be specified by purchaser.Sizes 12" and 14" up to Daniel # 900 contain "DVS" Seal Vulcanized to plate.

9

FLANGNEKTM - RING JOINT 2”-14” Daniel 600 & 900

A.P

.I. R

ing

Num

ber

Dia

m. I

nter

nal L

ine

Bor

e

Ups

tream

Fac

e of

Orif

ice

Pla

te to

Fac

e of

End

Dow

nstre

am F

ace

of O

rific

eP

late

to F

ace

of E

nd

Ove

rall

Face

to F

ace

Ope

ratin

g C

lear

ance

Fro

mC

ente

r

Bod

y C

lear

ance

Fro

mC

ente

r

Cen

terli

ne to

Bot

tom

Cen

terli

ne to

Top

Cle

aran

ce fo

r Pla

teC

hang

ing

Dia

met

er o

f Fla

nge

Dia

met

er o

f Bol

t Circ

le

Pitc

h D

iam

eter

of R

ing

and

Gro

ove

Dep

th o

f Gro

ove

Wid

th o

f Gro

ove

Flan

ge T

hick

ness

Num

ber a

nd D

iam

eter

of

Bol

t-Stu

ds (P

er F

lang

e)

Leng

th o

f Bol

t-Stu

ds w

ith 2

Hex

. Nut

s

Dia

met

er o

f Hub

at P

oint

of

Wel

ding

Siz

e of

Dra

in P

lug

Orif

ice

Pla

te T

hick

ness

App

rozi

mat

e W

eigh

t(P

ound

s)

SIZE A B C D F G H I I1 J K L2 M1 M2 N1 O P R SIZECatalog No. 0145DS-Daniel 600 -Dual Seal

23468

101214

R-23R-31R-37R-45R-49R-53R-59R-61

2.0673.0684.0266.0657.981

10.02011.93813.125

5 5/167

6 5/88

8 11/169 1/169 7/8

10 5/16

5 5/167

6 5/88

8 11/168 1/168 7/8

10 5/16

10 3/414 1/813 3/816 1/817 5/817 3/8

1920 7/8

12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8

4 1/45 3/86 1/8

78 9

10 3/411 7/8

3 3/44 1/85 3/8

78 1/4

1011

11 7/8

13 1/414 1/215 3/418 3/421 3/424 7/8

2831 5/8

5 9/166 1/16

7911

13 1/815

17 9/16

6 1/28 1/4

10 3/414

16 1/22022

23 3/4

56 5/88 1/211 1/213 3/4

1719 1/420 3/4

3 1/44 7/85 7/8

8 5/1610 5/812 3/4

1516 1/2

5/165/165/165/165/165/165/165/16

15/3215/3215/3215/3215/3215/3215/3215/32

1 5/161 9/161 13/162 3/162 1/2

2 13/162 15/163 1/16

8- 5/88- 3/48- 7/812- 1

12- 1 1/816- 1 1/412- 1 1/420- 1 3/8

4 1/25 1/4

678

8 3/49

9 3/4

2.3753.5004.5006.6258.625

10.75012.75014.000

1/21/23/43/43/43/43/43/4

1/81/81/81/81/41/41/41/4

105160265400595745

12151475

23468

101214

Catalog No. 0146TS-Daniel 900 -Teflon Seal23468

101214

R-24R-31R-37R-45R-49R-53R-57R-62

††††††††

77

7 7/88 5/89 1/8

10 7/811 5/8

11 1/16

77

7 1/88

9 1/810 7/811 5/811 1/4

14 1/814 1/815 1/816 3/418 1/2

2223 1/2

22 9/16

12 7/813 3/414 1/815 1/217 1/418 3/820 3/8

21

5 3/45 3/86 1/8

79 1/8

1112 1/412 1/8

4 1/44 3/45 3/47 1/29 1/4

10 3/412

12 13/16

13 3/414 1/215 3/418 3/421 3/424 7/8

2831 11 /16

5 9/166 1/16

7911

13 1/815

17 9/16

8 1/29 1/211 1/2

1518 1/221 1/2

2425 1/4

6 1/27 1/29 1/4

12 1/215 1/218 1/2

2122

3 3/44 7/85 7/88 1/3

10 5/812 3/4

1516 1/2

5/165/165/165/165/165/165/167/16

15/3215/3215/3215/3215/3215/3215/3221/32

1 13/161 13/162 1/162 1/2

2 13/163 1/163 7/163 13/16

8- 7/88- 7/8

8- 1 1/812- 1 1/812- 1 3/816- 1 3/820- 1 3/820- 1 1/2

66789

9 1/210 1/411 3/4

2.3753.5004.5006.6258.625

10.75012.75014.000

1/21/23/43/43/43/43/43/4

1/81/81/81/81/41/41/41/4

205215300490

1095155519352115

23468

101214

† To be specified by purchaser.Sizes 12" and 14" up to Daniel 900 contain "DVS" Seal Vulcanized to plate.


10

FLANGNEKTM - RAISED FACE 2”-12” Daniel 1500 & 2”- 6” Daniel 2500

Dia

m. I

nter

nal L

ine

Bor

e

Ups

tream

Fac

e of

Orif

ice

Pla

te to

Fac

e of

End

Sow

nstre

am F

ace

ofO

rific

e P

late

to F

ace

ofE

nd

Ove

rall

Face

to F

ace

Ope

ratin

g C

lear

ance

From

Cen

ter

Bod

y C

lear

ance

Fro

mC

ente

r

Cen

terli

ne to

Bot

tom

Cen

terli

ne to

Top

Cle

aran

ce fo

r Pla

teC

hang

ing

Dia

met

er o

f Gla

nge

Dia

met

er o

f Bol

t Circ

le

Dia

met

er o

f Rai

sed

Face

+.0

00 -.

005

Hei

ght o

f Rai

sed

Face

Flan

ge T

hick

ness

Num

ber a

nd D

iam

eter

of B

olt-S

tuds

(Per

Flan

ge)

Leng

th o

f Bol

t-Stu

dsw

ith 2

Hex

. Nut

s

Dia

met

er o

f Hub

at

Poi

nt o

f Wel

ding

Siz

e of

Dra

in P

lugs

Orif

ice

Pla

te T

hick

ness

App

rozi

mat

e W

eigh

t(P

ound

s)

SIZE A B C D F G H I I1 J K L M N O P R SIZECatalog No. 017-TS-Daniel 1500 -Teflon Seal

23468

1012

†††††††

6 15/168 3/168 3/8

10 3/411 23/3212 5/1613 5/16

6 15/167 11/167 7/8

10 3/1611 5/3212 5/1613 5/16

1416

16 3/821 1/1623 1/824 4/826 7/8

12 7/813 3/4

1516

17 1/418 3/820 1/4

5 3/45 5/86 1/27 3/49 3/4

1112 3/8

4 1/45 1/46 1/87 3/49 1/211 1/213 1/4

13 3/414 7/816 1/819 1/822 1/8

2628 1/4

5 9/166 1/16

7911

13 1/815

8 1/210 1/212 1/415 1/2

1923

26 1/2

6 1/28

9 1/212 1/215 1/2

1922 1/2

3.6255.0006.1888.500

10.62512.75015.000

1/41/41/41/41/41/41/4

1 3/42 1/82 3/83 1/23 7/84 1/25 1/8

8- 7/88- 1 1/48- 1 1/4

12- 1 3/812- 1 5/812- 1'7/8

16- 2

5 3/47

7 3/410 1/411 1/213 1/414 3/4

2.3753.5004.5006.6258.625

10.75012.750

1/21/23/43/43/43/43/4

1/81/81/81/81/41/41/4

205 275 445 710

1240 1745 2805

23468

1012

Catalog No. 018TS-Daniel 2500 -Teflon Seal

2346

††††

8 5/89 9/1610 1/212 1/2

8 5/89 9/1610 1/212 1/2

17 3/819 1/421 1/825 1/8

15 1/815 1/816 1/417 1/2

7 1/47 1/47 3/49 1/2

667

9 1/2

16 7/816 7/8

1719 1/8

77

7 3/89

9 1/4121419

6 3/49

10 3/414 1/2

3.6255.0006.1888.500

1/41/41/41/4

2 1/42 7/83 1/44 1/2

8- 18- 1 1/48- 1 1/2

8- 2

78 3/4

1013 3/4

2.3753.5004.5006.625

1/21/23/43/4

1/81/81/81/8

520 575 715 1195

2346

† To be specified by purchaser.


11

FLANGNEKTM - RING JOINT2”-12” Daniel 1500 & 2”- 6” Daniel 2500

A.P

.I. R

ing

Num

ber

Dia

m. I

nter

nal L

ine

Bor

e

Ups

tream

Fac

e of

Orif

ice

Pla

te to

Fac

e of

End

Dow

nstre

am F

ace

ofO

rific

e P

late

to F

ace

of E

nd

Ove

rall

Face

to F

ace

Ope

ratin

g C

lear

ance

Fro

mC

ente

r

Bod

y C

lear

ance

Fro

mC

ente

r

Cen

terli

ne to

Bot

tom

Cen

terli

ne to

Top

Cle

aran

ce fo

r Pla

teC

hang

ing

Dia

met

er o

f Fla

nge

Dia

met

er o

f Bol

t Circ

le

Pitc

h D

iam

eter

of R

ing

and

Gro

ove

Dep

th o

f Gro

ove

Wid

th o

f Gro

ove

Flan

ge T

hick

ness

Num

ber a

nd D

iam

eter

of

Bol

t-Stu

ds (P

er F

lang

e)

Leng

th o

f Bol

t-Stu

ds w

ith 2

Hex

. Nut

s

Dia

met

er o

f Hub

at P

oint

of

Wel

ding

Siz

e of

Dra

in P

lug

Orif

ice

Pla

te T

hick

ness

App

roxi

mat

e W

eigh

t(P

ound

s)

SIZE A B C D F G H I I1 J K L2 M1 M2 N1 O P R SIZECatalog No. 0147-TS-Daniel 1500 -Teflon Seal

23468

1012

R-24R-35R-39R-46R-50R-54R-58

†††††††

78 1/4

8 7/1610 7/8

11 29/3212 1/213 5/8

77 3/4

7 15/1610 5/1611 11/3212 1/213 5/8

14 1/816 1/816 1/2

21 5/1623 1/225 1/427 1/2

12 7/813 3/4

1516 1/817 1/418 3/820 1/4

5 3/45 5/86 1/27 3/49 3/4

1112 3/8

4 1/45 1/46 1/87 3/49 1/211 1/213 1/4

13 3/414 7/816 1/819 1/822 1/8

2628 1/4

5 9/166 1/16

7911

13 1/815

8 1/210 1/212 1/415 1/2

1923

26 1/2

6 1/28

9 1/212 1/215 1/2

1922 1/2

3 3/45 3/86 3/8

8 5/1610 5/812 3/4

15

5/165/165/163/8

7/167/169/16

15/3215/3215/3217/3221/3221/3229/32

1 3/162 3/162 7/163 5/8

4 1/164 11/165 7/16

8- 7/88- 1 1/88- 1 1/4

12- 1 3/812- 1/5/812- 1 7/8

16- 2

67 1/4

810 1/2

1213 3/415 1/4

2.3753.5004.5006.6258.625

10.75012.750

1/81/23/43/43/43/43/4

1/81/81/81/81/41/41/4

205275445710

124017452805

23468

1012

Catalog No. 0148-TS-Daniel 2500 -Teflon Seal2346

R-26R-32R-38R-47

††††

8 11/169 11/16

10 11/1612 3/4

8 11/169 11/16

10 11/1612 3/4

17 1/219 1/221 1/225 5/8

15 1/815 1/816 1/417 1/2

7 1/47 1/47 3/49 1/2

667

9 1/2

16 7/816 7/8

1719 /18

77

7 3/89

9 1/4121419

6 3/49

10 3/414 1/2

45

6 3/169

5/163/8

7/161/2

15/3217/3221/3225/32

2 5/163

3 7/164 3/4

8- 18- 1 1/48- 1 1/2

8- 2

7 1/49

10 1/214 1/4

2.3753.5004.5006.625

1/21/23/43/4

1/81/81/81/8

5205757151195

2346

† To be specified by purchaser. Sizes 12" and 14" up to Daniel 900 Contain "DVS" Seal Vulcanized to plate.


12

FLANGED - RAISED FACE 2”-14” Daniel 150 - 900

Dia

m. I

nter

nal L

ine

Bor

e

Ups

tream

face

of

Orif

ice

Pla

te to

Fac

e of

End

Dow

nstre

am F

ace

ofO

rific

e P

late

to F

ace

ofE

nd

Ove

rall

Face

to F

ace

Ope

ratin

g C

lear

ance

From

Cen

ter

Bod

y C

lear

ance

Fro

mC

ente

r

Cen

terli

ne to

Bot

tom

Cen

terli

ne to

Top

Cle

aran

ce fo

r Pla

teC

hang

ing

Dia

met

er o

f Fla

nge

Dia

met

er o

f Bol

t Circ

le

Dia

met

er o

f Rai

sed

Face

+.0

00 -.

005

Hei

ght o

f Rai

sed

Face

Flan

ge T

hick

ness

Num

ber a

nd D

iam

eter

of B

otls

or S

tuds

)per

Gla

nge)

Leng

th o

f Bol

ts (S

q.H

ead

with

Hex

. Nut

)

Leng

th o

f Bol

t-Stu

dsw

ith 2

Hex

. Nut

s

Siz

e of

Dra

in P

lugs

Orif

ice

Pla

te T

hick

ness

App

roxi

mat

e W

eigh

t(P

ound

s)

SIZE A B C D F G H I I1 J K L M N P R SIZECatalog No. 101DS-Daniel 150 -Dual Seal

23468

101214

2.0673.0684.0266.0658.071

10.13612.09013.250

5 1/45 5/165 7/165 9/166 1/86 3/87 3/87 3/8

5 1/45 5/165 7/165 9/166 1/86 3/86 3/87 3/8

10 5/810 3/4

1111 1/412 1/2

131415

12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8

4 1/45 3/85 7/86 3/4

89

10 3/411

3 3/44

4 1/25 1/26 3/4

89 1/2

10 1/2

13 1/414 1/215 3/418 3/421 3/424 7/8

2831 5/8

5 9/166 1/16

7811

13 1/815

17 9/16

67 1/2

911

13 1/2161921

4 3/46

7 1/29 1/211 3/414 1/4

1718 3/4

3 5/85

6 3/168 1/2

10 5/812 3/4

1516 1/4

1/161/161/161/161/161/161/161/16

3/415/1615/16

11 1/8

1 3/161 1/41 3/8

4- 5/84- 5/88- 5/88- 3/48- 3/4

12- 7/812- 7/812- 1

2 3/433

3 1/43 1/23 3/4

44 1/4

3 1/43 3/43 3/4

44 1/44 3/44 3/45 1/2

1/21/23/43/43/43/43/43/4

1/81/81/81/81/41/41/41/4

105150245285375510720

1030

23468

101214


101214

2.0673.0684.0266.0658.071

10.13612.09013.250

5 1/45 1/26 1/47 1/46 7/88 1/88 7/89 3/8

5 1/45 1/25 5/86 5/86 7/87 1/87 7/89 3/8

10 5/811 1/8

121414

15 1/21719

12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8

4 1/45 3/85 7/8

789

10 3/411

3 3/44 1/8

56 1/47 1/28 3/4

10 1/411 1/2

13 1/414 1/215 3/418 3/421 3/424 7/8

2831 5/8

5 9/166 1/16

7811

13 1/815

17 9/16

6 1/28 1/4

1012 1/2

1517 1/220 1/2

23

56 5/87 1/8

10 5/813

15 1/417 3/420 1/4

3 5/85

6 3/168 1/2

10 5/812 3/4

1516 1/4

1/161/161/161/161/161/161/161/16

7/81 1/81 1/4

1 7/161 5/81 7/8

22 1/8

8- 5/88- 3/48- 3/4

12- 3/412- 7/8

16-116-1 1/820-1 1/8

33 1/23 3/44 1/44 3/45 1/45 3/4

6

3 1/24 1/44 1/2

55 1/26 1/46 3/4

7

1/21/23/43/43/43/43/43/4

1/81/81/81/81/41/41/41/4

110165220370540695

12251270

23468

101214


101214

2.0673.0684.0266.0657.981

10.02011.93813.125

5 1/46 15/166 9/16

7 15/168 5/8

99 13/1610 1/4

5 1/46 15/166 9/16

7 15/168 5/8

88 13/1410 1/4

10 5/814

13 1/416

17 1/217 1/418 7/820 3/4

12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8

4 1/45 3/86 1/8

789

10 3/411 7/8

3 3/44 1/85 3/8

78 1/4

1011

11 7/8

13 1/414 1/215 3/418 3/421 3/424 7/8

2831 5/8

5 9/166 1/16

7811

13 1/815

17 9/16

68 1/4

10 3/414

16 1/22022

23 3/4

56 5/88 1/211 1/213 3/4

1719 1/420 3/4

3.6255.0006.1888.500

10.62512.75015.00016.250

1/41/41/41/41/41/41/41/4

1 1/41 1/21 3/42 1/4

2 7/162 3/42 7/8

3

8- 5/88- 3/48- 7/812- 1

12-1 1/816-1 1/420-1 1/420-1 3/8

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

4 1/45

5 3/46 3/47 3/48 1/28 3/49 1/2

1/21/23/43/43/43/43/43/4

1/81/81/81/81/41/41/41/4

115175300480710920

14301735

23468

101214


23468

101214

††††††††

6 15/166 15/167 13/168 9/169 1/16

10 13/1611 9/1611 1/16

6 15/166 15/167 1/167 15/169 1/16

10 13/1611 9/1611 1/6

141415

16 5/818 3/821 7/823 3/822 3/8

12 7/813 3/414 1/815 1/217 1/418 3/820 3/8

21

5 3/45 3/86 1/8

79 1/8

1112

12 3/8

4 1/44 3/45 3/47 1/29 1/4

10 3/412

12 3/16

13 3/414 1/215 3/418 3/421 3/424 7/8

2831 1/16

5 9/166 1/16

7811

13 1/815

17 9/16

8 1/29 1/211 1/2

1518 1/221 1/2

2425 1/4

6 1/27 1/29 1/4

12 1/215 1/218 1/2

2122

3.6255.0006.1888.500

10.62512.75015.00016.750

1/41/41/41/41/41/41/41/4

1 3/41 3/4

22 7/162 3/4

33 3/83 5/8

8- 7/88- 7/8

8-1 1/812-1 1/812-1 3/816-1 3/820-1 3/820-1 1/2

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

. . . .

5 3/45 3/46 3/47 3/48 3/49 1/4

1011 1/4

1/21/23/43/43/43/43/43/4

1/81/81/81/81/41/41/41/4

230245355600

1265180022602495

23468

101214

† To be specified by purchaser.Sizes 12" and 14" up to Daniel 900 Contain "DVS" Seal Vulcanized to plate.

13

FLANGED - RING JOINT 2”-14” Daniel 600 & 900

A.P

.I. R

ing

Num

ber

Dia

m. I

nter

nal L

ine

Bor

e

Ups

tream

Fac

e of

Orif

ice

Pla

te to

Fac

e of

End

Dow

nstre

am F

ace

of O

rific

eP

late

to F

ace

of E

nd

Ove

rall

Face

to F

ace

Ope

ratin

g C

lear

ance

Fro

mC

ente

r

Bod

y C

lear

ance

Fro

m C

ente

r

Cen

terli

ng to

Bot

tom

Cen

terli

ne to

Top

Cle

aran

ce fo

r Pla

te C

hang

ine

Dia

met

er o

f Fla

nge

Dia

met

er o

f Bol

t Circ

le

Pitc

h D

iam

eter

of R

ing

and

Gro

ove

Dep

th o

f Gro

ove

Wid

th o

f Gro

ove

Flan

ge T

hick

ness

Num

ber a

nd D

iam

eter

of

Bol

t-Stu

ds (P

er F

lang

e)

Leng

th o

f Bol

t-Stu

ds w

ith 2

Hex

. Nut

s

Siz

e of

Dra

in P

lug

Orif

ice

Pla

te T

hick

ness

App

roxi

mat

e W

eigh

t(P

ound

s)

SIZE A B C D F G H I I1 J K L2 M1 M2 N1 P R SIZECatalog No. 145DS-Daniel 600 -Dual Seal

23468

101214

R-23R-31R-37R-45R-49R-53R-57R-61

2.0673.0684.0266.0657.981

10.02011.93813.125

5 5/167

6 5/88

8 11/169 9/169 7/8

10 5/16

5 5/167

6 5/88

8 11/168 1/168 7/8

10 5/16

10 3/414 1/813 3/816 1/817 5/817 3/8

1920 7/8

12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8

4 1/45 3/86 1/8

789

10 3/411 7/8

3 3/44 1/85 3/8

78 1/4

1011

11 7/8

13 1/414 1/215 3/418 3/421 3/424 7/8

2831 5/8

5 9/166 1/16

7911

13 1/815

17 9/16

6 1/28 1/4

10 3/414

16 1/22022

23 3/4

56 5/88 1/211 1/213 3/4

1719 1/420 3/4

3 1/44 7/85 7/8

8 5/1610 5/812 3/4

1516 1/2

5/165/165/165/165/165/165/165/16

15/3215/3215/3215/3215/3215/3215/3215/32

1 5/161 9/16

1 13/162 3/162 1/2

2 13/162 15/163 1/16

8- 5/88- 3/48- 7/812-1

12-1 1/816-1 1/412-1 1/420-1 3/8

4 1/25 1/4

678

8 3/49

9 3/4

1/21/23/43/43/43/43/43/4

1/81/81/81/81/41/41/41/4

115175300480710920

14301735

23468

101214

Catalog No. 146TS-Daniel 900 -Teflon Seal23468

101214

R-24R-31R-37R-45R-49R-53R-57R-62

††††††††

7 7

7 7/88 5/89 1/8

10 7/811 5/8

13

77

7 1/88

9 1/810 7/811 5/8

12 15/16

14 1/814 1/815 1/816 3/418 1/2

2223 1/226 1/8

12 7/813 3/414 1/815 1/217 1/418 3/820 3/8

21

5 3/45 3/86 1/8

79 1/8

1112 1/412 1/8

4 1/44 3/45 3/47 1/29 1/4

10 3/412

12 13/16

13 3/414 1/215 3/418 3/421 3/424 7/8

2831 /16

5 9/166 1/16

7911

13 1/815

17 9/16

8 1/29 1/211 1/2

1518 1/221 1/2

2425 1/4

6 1/27 1/29 1/4

12 1/215 1/218 1/2

2122

3 3/44 7/85 7/8

8 5/1610 5/812 3/4

1516 1/2

5/165/165/165/165/165/165/167/16

15/3215/3215/3215/3215/3215/3215/3215/32

1 13/161 13/162 1/162 1/2

2 13/163 1/163 7/163 13/16

8- 7/88- 7/8

8-1 1/812-1 1/812-1 3/816-1 3/820-1 3/820-1 1/2

66789

9 1/210 1/411 3/4

1/21/23/43/43/43/43/43/4

1/81/81/81/81/41/41/41/4

230245355600

1265180022602495

23468

101214

† To be specified by purchaser. Sizes 12" and 14" up to Daniel 900 Contain "DVS" Seal Vulcanized to plate.

14

FLANGED - RAISED FACE2”-12” Daniel 1500 & 2”- 6” Daniel 2500

Dia

m. I

nter

nal L

ine

Bor

e

Ups

tream

Fac

e of

Orif

ice

Pla

te to

Fac

eof

End

Dow

nstre

am F

ace

ofO

rific

e P

late

to F

ace

of E

nd

Ove

rall

Face

to F

ace

Ope

ratin

g C

lear

ance

From

Cen

ter

Bod

y C

lear

ance

Fro

mC

ente

r

Cen

terli

ne to

Bot

tom

Cen

terli

ne to

Top

Cle

aran

ce fo

r Pla

teC

hang

ing

Dia

met

er o

f Fla

nge

Dia

met

er o

f Bol

tC

ircle

Dia

met

er o

f Rai

sed

Face

+.0

00 -.

005

Hei

ght o

f Rai

sed

Face

Flan

ge T

hick

ness

Num

ber a

ndD

iam

eter

of B

olt-

Stud

s (P

er F

lang

e)

Leng

th o

f Bol

t-Stu

dsw

ith 2

Hex

. Nut

s

Siz

e of

Dra

in P

lugs

Orif

ice

Pla

teTh

ickn

ess

App

roxi

mat

e W

eigh

t(P

ound

s)

SIZE A B C D F G H I I1 J K L M N P R SIZECatalog No. 107-TS-Daniel 1500 -Teflon Seal

23468

1012

†††††††

6 15/168 3/168 3/8

10 3/411 23/3212 5/1613 5/16

6 15/167 11/167 7/8

10 3/1611 5/3212 5/1613 5/16

1416

16 3/821 1/1623 1/824 7/826 7/8

12 7/813 3/4

1516

17 1/418 3/820 1/4

5 3/45 5/86 1/27 3/49 3/4

1112 3/8

4 1/45 1/46 1/87 3/49 1/211 1/213 1/4

13 3/414 7/816 1/819 1/822 1/8

2628 1/4

5 9/166 1/16

7911

13 1/815

8 1/210 1/212 1/415 1/2

1923

26 1/2

6 1/28

9 1/212 1/215 1/2

1922 1/2

3.6255.0006.1888.500

10.62512.75015.000

1/41/41/41/41/41/41/4

1 3/42 1/82 3/83 1/23 7/84 1/25 1/8

8- 7/88-1 1/88-1 1/4

12-1 3/812-1 5/812-1 7/8

16- 2

5 3/47

7 3/410 1/411 1/213 1/214 3/4

1/21/23/43/43/43/43/4

1/81/81/81/81/41/41/4

230275520875

150021803470

23468

1012

Catalog No. 108-TS-Daniel 2500 -Teflon Seal

2346

††††

8 5/89 9/1610 1/212 1/2

8 5/89 9/1610 1/212 1/2

17 3/819 1/421 1/825 1/8

15 1/815 1/816 1/417 1/2

7 1/47 1/47 3/49 1/2

667

9 1/2

16 7/816 7/8

1719 1/8

77

7 3/89

9 1/4121419

6 3/49

10 3/414 1/2

3.6255.0006.1888.500

1/41/41/41/4

2 1/42 7/83 1/44 1/2

8- 18-1 1/48-1 1/2

8- 2

78 3/4

1013 /34

1/21/23/43/4

1/81/81/81/8

560660840

1520

2346



15

FLANGED - RING JOINT2”-12” Daniel 1500 & 2”- 6” Daniel 2500

A.P

.I. R

ing

Num

ber

Dia

m. I

nter

nal L

ine

Bor

e

Ups

tream

Fac

e of

Orif

ice

Pla

te to

Fac

e of

End

Dow

nstre

am F

ace

of O

rific

eP

late

to F

ace

of E

nd

Ove

rall

Face

to F

ace

Ope

ratin

g C

lear

ance

Fro

mC

ente

r

Bod

y C

lear

ance

Fro

mC

ente

r

Cen

terli

ne to

Bot

tom

Cen

terli

ne to

Top

Cle

aran

ce fo

r Pla

teC

hang

ing

Dia

met

er o

f Fla

nge

Dia

met

er o

f Bol

t Circ

le

Pitc

h D

iam

eter

of R

ing

and

Gro

ove

Dep

th o

f Gro

ove

Wid

th o

f Gro

ove

Flan

ge T

hick

ness

Num

ber a

nd D

iam

eter

of

Bol

t-Stu

ds (P

er F

lang

e)

Leng

th o

f Bol

t-Stu

ds w

ith 2

Hex

. Nut

s

Siz

e of

Dra

in P

lugs

Orif

ice

Pla

te T

hick

ness

App

roxi

mat

e W

eigh

t(P

ound

s)

SIZE A B C D F G H I I1 J K L2 M1 M2 N1 P R SIZECatalog No. 148-TS-Daniel 2500 -Teflon Seal

23468

1012

R-24R-35R-39R-46R-50R-54R-58

†††††††

78 1/4

8 7/1610 7/8

11 29/3212 1/213 5/8

77 3/4

7 15/1610 5/1611 11/3212 1/213 5/8

14 1/816 1/816 1/2

21 9/1623 1/225 1/427 1/2

12 7/813 3/4

1516 1/817 1/418 3/820 1/4

5 3/45 5/86 1/27 3/49 3/4

1112 3/8

4 1/45 1/46 1/87 3/49 1/211 1/213 1/4

13 3/414 7/816 1/819 1/822 1/8

2627 13/16

5 9/166 1/16

7911

13 1/815

8 1/210 1/212 1/415 1/2

1923

26 1/2

6 1/28

9 1/212 1/215 1/2

1922 1/2

3 3/45 3/86 3/8

8 5/1610 5/812 3/4

15

5/165/165/163/8

7/167/169/16

15/3215/3215/3217/3221/3221/3229/32

1 3/162 3/162 7/163 5/8

4 1/164 11/165 7/16

8- 7/88-1 1/88-1 1/4

12-1 3/812-1 5/812-1 7/8

16- 2

67 1/4

810 1/2

1213 3/415 1/4

1/21/23/43/43/43/43/4

1/81/81/81/81/41/41/4

230325520875

150021803470

23468

1012

Catalog No. 148-TS-Daniel 2500 -Teflon Seal2346

R-26R-32R-38R-47

††††

8 11/169 11/16

10 11/1612 3/4

8 11/169 11/16

10 11/1612 3/4

17 1/219 1/221 1/225 5/8

15 1/815 1/816 1/417 1/2

7 1/47 1/47 3/49 1/2

667

9 1/2

16 7/816 7/8

1719 1/8

77

7 3/89

9 1/4121419

6 3/49

10 3/414 1/2

45

6 3/169

5/163/8

7/161/2

15/3217/3221/3225/32

2 5/163

3 7/164 3/4

8- 18-1 1/48-1 1/2

8- 2

7 1/49

10 1/214 1/4

1/21/23/43/4

1/81/81/81/8

560660840

1520

2346



16

WELDNEKTM

2”-14” Daniel 600 & 900

Dia

m. I

nter

nal

Line

Bor

e

Ups

tream

Fac

e of

Orif

ice

Pla

te to

Face

of E

nd

Dow

nstre

am F

ace

of O

rific

e P

late

toFa

ce o

f End

Ove

rall

Face

toFa

ce

Ope

ratin

gC

lear

ance

Fro

mC

ente

r

Bod

y C

lear

ance

From

Cen

ter

Cen

terli

ne to

Bot

tom

Cen

terli

ne to

Top

Cle

aran

ce fo

rP

late

Cha

ngin

g

Dia

met

er o

f Hub

at P

oint

of

Wel

ding

Siz

e of

Dra

inP

lugs

Orif

ice

Pla

teTh

ickn

ess

App

roxi

mat

eW

eigh

t (P

ound

s)

SIZE A B C D F G H I I1 O P R SIZE

Catalog No. 185DS-Daniel 600 -Dual Seal

23468

101214

2.0673.0684.0266.0657.981

10.02011.93813.125

5 1/46 15/167 3/16

7 15/168 5/8

99 4/5

10 1/4

5 1/46 15/167 3/16

7 15/168 5/8

88 13/1610 1/4

10 5/814

14 1/216

17 1/217 1/418 7/820 3/4

12 7/813 3/414 1/815 1/216 1/217 3/818 7/820 1/8

4 1/45 5/86 1/8

789

10 3/811 7/8

3 3/44 1/85 3/8

78 1/4

1011

11 7/8

13 1/414 1/21 3/4

18 3/421 3/424 7/8

2831 5/8

5 9/166 1/16

7911

13 1/815

17 9/16

2.3753.5004.5006.6258.625

10.75012.75014.000

1/21/23/43/43/43/43/43/4

1/81/81/81/81/41/41/41/4

95145230320480570

10001215

23468

101214


23468

101214

††††††††

6 15/166 15/167 13/168 9/169 1/16

10 13/1611 9/1611 1/16

6 15/166 15/167 1/16

7 13/169 1/16

10 13/1611 9/1611 1/16

141415

16 5/818 3/821 7/823 3/822 3/8

12 7/813 3/414 1/815 1/217 1/418 3/820 3/8

21

5 3/45 3/86 1/8

79 1/8

1112 1/412 3/8

4 1/44 3/45 3/47 1/29 1/4

10 3/412

12 13/16

13 3/414 1/215 3/418 3/421 3/424 7/8

2831 11/16

5 9/166 1/16

7911

13 1/815

17 9/16

2.3753.5004.5006.6258.625

10.75012.75014.000

1/21/23/43/43/43/43/43/4

1/81/81/81/81/41/41/41/4

180185245380925

131016101735

23468

101214

† To be specified by purchaser.Sizes 12" and 14" up to Daniel 900 contain "DVS" Seal Vulcanized to plate.


17

WELDNEKTM

2”-12” Daniel 1500 & 2”- 6” Daniel 2500

Dia

m. I

nter

nal L

ine

Bor

e

Ups

tream

Fac

e of

Orif

ice

Pla

te to

Fac

e of

End

Dow

nstre

am F

ace

of O

rific

eP

late

to F

ace

of E

nd

Ove

rall

Face

to F

ace

Ope

ratin

g C

lear

ance

Fro

mC

ente

r

Bod

y C

lear

ance

Fro

m C

ente

r

Cen

terli

ne to

Bot

tom

Cen

terli

ne to

Top

Cle

aran

ce fo

r Pla

te C

hang

ing

Dia

met

er o

f Hub

at P

oint

of

Wel

ding

Siz

e of

Dra

in P

lugs

Orif

ice

Pla

te T

hick

ness

App

roxi

mat

e W

eigh

t(P

ound

s)

SIZE A B C D F G H I I1 O P R SIZE


23468

1012

†††††††

6 15/168 3/168 3/8

10 3/411 23/3212 5/1613 5/16

6 15/167 11/167 7/8

10 3/1611 5/3212 5/1613 5/16

1416

16 3/821 1/1623 1/824 7/826 7/8

12 7/813 3/4

1516

17 1/418 3/820 1/4

5 3/45 5/86 1/27 3/49 3/4

1112 3/8

4 1/45 1/46 1/87 3/49 1/211 1/213 1/4

13 3/414 7/816 1/819 1/822 1/8

2628 1/4

5 9/166 1/16

7911

13 1/815

2.3753.5004.5006.6258.625

10.75012.750

1/21/23/43/43/43/43/4

1/81/81/81/81/41/41/4

180225370545980

13102140

23468

1012


2346

††††

8 5/89 9/1610 1/212 1/2

8 5/89 9/1610 1/212 1/2

17 3/819 1/421 1/825 1/8

15 1/815 1/216 1/417 1/2

7 1/47 1/47 3/49 1/2

667

9 1/2

17 7/816 7/8

1719 1/8

77

7 3/89

2.3753.5004.5006.625

1/21/23/43/4

1/81/81/81/8

480490590870

2346



18

Orifice Plate Sealing Units

The Daniel Dual Seal is the most simple and practical orifice plate sealing device for normal flowing streams. It is precision molded from 70-80 shore nitrile synthetic rubber** and provides four rubber-to-metal sealing surfaces 360º around the plate.The units positively seal against both outer faces of the plate and against both seatsof the orifice fitting to prevent leakage. In 1-1/2" to 10" sizes, the "DSC" is interchangeable with Daniel "TSC" and "MSC" seal units. In 12" sizes and up, theseal is bonded from 80-90 shore rubber directly to the outer edge of the orifice plateat the factory. If damaged, the "DVSC" seal and plate may be returned to the factoryfor revulcanizing. The "DSC" and "DVSC" seals are used in Daniel fittings sizes up toDaniel 600, in temperatures from -20ºF to +275ºF.

*US Patent # 5085250. **Also available in Viton.

The Daniel Snap Seal Ring is a removable orifice plate holder designed for use inservices where elastomer seal swelling is a problem. Certain media, such as ethylene or carbon dioxide may cause seal swelling when other type seal units areremoved from high-pressure service. The Snap Seal Ring unit consists of two symmetrical metal rings, each one having an O-ring on both sides for a positive sealon the plate side and the fitting side of the ring. These rings center and secure theorifice plate between them. The assembled unit provides a full 360º rubber-to-metalseal around both sides, even in the absence of any pressure differential. No specialtools are required for assembly or disassembly. The Snap Seal Ring is designed forservice temperatures ranging from -20ºF to +275ºF (standard O-rings) to -67ºF to+437ºF (Viton O-rings). It is available for line sizes of 2" through 16". When ordering,please specify nominal line size, schedule, plate thickness, and flowing media ormaterial choice. The unit is available in 316 stainless steel and cadmium-plated carbon steel.

*US Patent # 4,478,251.

“DSC” DUAL SEAL*

"DSC" in 2"-8", "DS" in 10"

“SSR” SNAP SEAL RING*

"SSRC" 2"-8", "SSR" 10" and up


19

“TSC” TEFLON SEAL

"TSC" 2"-8", "TS" 10"and up

“MSC” METAL SEAL

"MSC" 2"-8", "MS" 10" and up

The Daniel Teflon Seal is a superior orifice plate sealing unit for difficult, corrosiveflows and for higher temperatures than the "DSC" unit can handle. The "TSC" hasproven effective in such flows as dilute sulphuric acid, fuming nitric acid, hydrazine,liquid oxygen and other unusual flows, from -65ºF to +500ºF. The two-piece unit consists of an inlet ring which fits around the plate outer diameter, and a downstreamring fitted with metal clips for assembling the unit. A special lip on this ring plus anannular groove* provide compression to effectively seal off the plate. The "TSC" unitcan be assembled or taken apart by hand and is interchangeable in 1 1/2" to 10"sizes with Daniel "DSC" and "MSC" seal units. The Teflon seal is recommended forservices with Daniel 900, 1500, 2500 fittings or lower pressure services where rubberseals may not be satisfactory. Size 14" and larger now have graphite added for lubricity and ease of movement.

*This groove should be spread by inserting a blunt object such as screw driver and rotating 360º to reengage the spring lip after each use.

The Daniel Metal Seal is a stainless or cadmium-plated carbon steel clip-ring assembly recommended for high pressures and for temperatures up to 1200ºF. Theassembly consists of an upstream and a downstream ring. The upstream ring has arecessed groove into which a thin leaf-spring is inserted. When the plate is clampedbetween the rings, the spring provides the necessary compression to seat the plateagainst the downstream ring and effect a seal. "MSC" Seal Units of cadmium-platedcarbon steel are recommended for services to +600ºF, standard 316 stainless steelunits to +1000ºF, and 316 stainless steel units with an iconel spring to +1200ºF. The"MSC" seal unit can be assembled or taken apart by hand and is interchangeable in1-1/2" to 12" sizes with Daniel "DSC" and "TSC" seal units.


©2003 Daniel Measurement and Control, Inc., all rights reserved. Printed in USA , DAN-DIF-TG-11-1003

Daniel Division HeadquartersHouston, Texas, USA, Calgary, Alberta, Canada, Singapore - Asia Pacific, T: 713-467-6000, F: 713-827-3880 T: 403-279-1879, F: 403-236-1337 T: +65-6777-8211, F: +65-6770-8001

Stirling, Scotland - UK, Mid-East, Africa, USA Toll Free 1-888-FLOW-001 www.daniel.comT: +44 01786 433400, F: +44 01786 433401

Daniel is a wholly owned subsidiary of Emerson Electric Co., and a division of Emerson Process Management. The Daniel logo is a registered trademark of DanielIndustries, Inc. The Emerson logo is a registered trademark and service mark of Emerson Electric Co. The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express orimplied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications ofsuch products at any time. Daniel does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use andmaintenance of any Daniel product remains solely with the purchaser and end-user.


Documents

BRO_Senior Orifice Fitting_DAN-DIF-TG-11-1003_2003-10_EN