BRUDA

Single piece high-pressure diecast aluminium housing.

Non-yellowing tempered glass cover.

Computer aided design reflector.

Equipped with timed ignitor.

Re-lamping and maintenance without tools.

Double layer coating.

Removable control gear plate.

Available in 6 colors.

BRUDA

BRUDA, designed specifically to allow for tool free maintenance is a single piece high pressure die cast area light. High output computer designed reflector with a removable control gear plate. BRUDA is equipped with timed ignitor and double layer coating and available in six colors. Moreover, this piece shows solidarity through lines of curvature from the top streaming down into this entire subject. Bruda is operated with HID lamps and LED.

424

Specification

• Fixtureismanufacturedincompliancewithinternationalstandard of general requirement IEC 60598-1 and fixed general purpose luminaires IEC 60598-2-1. Electrical protection class1. Protection against dust and water IP65. Protection against mechanical impact IK08 on body and IK07 optical part. • High-pressureDieCastAluminiumalloybodyandcomponents. • NanoCeramicsurfaceconversion,resistanttocorrosive environment. Luminiare primarily coated with epoxy resin and top coated with UV stabilized polyester powder and cured in digital temperature controlled chamber at 200°C. • Impactresistantsafetytemperedglasscover.Abletowithstandthe temperature up to 250°C. • HighefficiencyengineeringdesignedDeep-Drawformingreflector. • Post-curedtreatedsiliconegasket.Temperatureandweather resistant.Workingtemperature-40°Cto+200°C. • Externalscrewsareinstainlesssteelwithprotectiondipping. • E27lampholderinceramicbodyfromVosslohSchwabeor equivalents. VDE/ ENEC approved. G12 lampholder in ceramic body from BJB or equivalents. VDE/ ENEC approved. • VacuumimpregnatedmagneticballastforHIDlampfromVossloh Schwabe/ BAG Electronics or equivalents. ENEC approved. Aluminium case capacitor with over pressure safety device from Italfarad or equivalents. ENEC approved. Electronic ignitor with automatic switch-off function from Vossloh Schwabe or equivalents. ENEC approved. • HighefficiencyLEDmoduleutilizedPhilipsLumiledchips.Assembled on MCPCB and mounted on to heat conductive material. High quality constant current LED driver. Conform to safety standard and electromagnetic compatibility standard. Driver is integrated in the luminaire. Thewholesystemstestedtobeoperatedundermaximumambient environmentupto+40°C. • Tinnedcopperconductorwithsiliconeinsulatedinternalwire fromENCOorequivalents.IMQapproved.Workingtemperature -40°Cto+180°C. HID control gear wired with double insulated silicone cable and compatible to be operated under ignition voltage up to 5KV. • Class1luminaireprovidedwiththeearthconnection. • Installationworkhastobecarriedonaccordingtotheenclosed installation manual.

Available Color

Black (replacethelast2digitsoforderingcodewith01)Graphite (replacethelast2digitsoforderingcodewith02)DarkGrey (replacethelast2digitsoforderingcodewith03)AluminiumSilver (replacethelast2digitsoforderingcodewith04)SmoothSilver (replacethelast2digitsoforderingcodewith05)White (replacethelast2digitsoforderingcodewith06)

BRUDA

425

426

BRUDA Area Light

IP65 Class1

BRUDA

HIT-CEG1235W3300lmOrdering code:7751-9-3-751-XX

LED 54W4000K 6000lmOrdering code:7751-9-3-907-XX

HIT-CEG1270W 6600lmOrdering code:7751-9-3-752-XX

HST-MFE2770W 6600lmOrdering code:7751-9-3-621-XX

427

BRUDA

SAMPLE OF LIGHTING LEVEL AND ITS DITRIBUTION

PRODUCTNAME :BRUDAAreaLight DISTANCEA :20METERS

TYPE :HIT-CEG1270W6600lm DISTANCEB :2METERS

ORDERINGCODE :7751-9-3-752-XX MOUNTINGHEIGHT :7METERS

LUMINOUSFLUX :5887lm

A

B

Eav [lux] : 12

Emin [lux] : 2.17

Emax [lux] : 40