B.tech EEE Syllabus 3rd&4th Sem

7/29/2019 B.tech EEE Syllabus 3rd&4th Sem

1/25

Department of Electrical & Electronics Engineering

B.Tech (EEE)

COURSE STRUCTURE & SYLLABUSB.Tech. 3rd Semester

Code Course Theory Practical Credits

EEE 2402 Circuit Theory 3+1*

- 4

EEE 2403 DC Machines 3+1* - 4

EEE 2404 Electro Magnetic Field Theory 3+1*

ECE 2401 Electronic Devices and Circuits 3+1* - 4

ME 2416 Basic Prime Movers and Pumps 3+1* - 4

ECE 2204 Electronic Devices and Circuits Lab - 3 2

ME 2217Basic Prime Movers and Pumps

Lab- 3 2

Total20 6 24

B.Tech- 4th Semester

Code Course Theory Practical Credits

MATH 2403 Complex analysis 3+1* - 4

EEE 2405 Linear system analysis 3+1* - 4

EEE 2406 Power Generation and Distribution 3+1* - 4

EEE 2407 Transformers &Induction Machines 3+1* - 4

ECE 2413Digital Electronics and

Microprocessor3+1* - 4

EEE 2208 DC Machines Lab - 3 2

EEE 2209 Electrical Circuits and Simulation Lab - 3 2

Total 20 6 24

*Tutorial

EEE 2410- DC Machines and Transformers-offered to PE EEE 2411- Electrical Circuit and Field Theory-offered to PE EEE 2412- Network Analysis- offered to ECE EEE 2213- Circuits and Simulation lab- offered to PE EEE 2214- DC Machines and Transformers Lab-offered to PE EEE 2215- Networks and Simulation lab- offered to ECE


2/25


B.Tech (EEE)- 3rd semester

SYLLABUS(Applicable for 2012-13 admitted batch)

Course Title: CIRCUIT THEROY Subject code: EEE 2402

L T P C3 1 0 4

COURSE OBJECTIVES:This course enables the students to

Develop the basic concepts of network analysis, which is the pre-requisite for all the electricalengineering subjects.

Solve different complex circuits using various network reduction techniques such as Sourcetransformation, Network theorems etc. Comprehend three phase systems with balanced and unbalanced loads and power measurements. Synthesize the transmission line parameters using two-port networks. Evaluate AC and DC transients for complex electrical systems.

COURSE OUTCOMES:After the completion of the course, students are able to Investigate the methods to improve power factor in power system networks. Design resonant circuits which are used in wireless transmission and communication networks. Understand 3-phase ac circuits for designing and analysis of power system networks. Understand network theorems to simplify the complex networks. Understand transient analysis in electrical circuits and to analyze the power system stability. Evaluate the parameters of two port networks to analyze the performance of transmission lines. Gain the knowledge to solve transmission line networks and apply in designing the transmission

lines

UNIT- I: SINUSOIDAL STEADY STATE ANALYSIS (15 hours)Concept of Phasor and J notation, Impedance and Admittance Time domain and frequency domain

Response of R,L,C series, parallel and series- parallel circuits to sinusoidal excitation, computation of

active, reactive, complex, power and power factor, Series and parallel resonance of RLC circuits-selectivity, bandwidth and quality factor- implicational with voltage and current excitation.

UNIT II: 3-PHASE CIRCUITS AND NETWORK THEOREMS (16 hours)THREE PHASE CIRCUITS: Advantages of 3-phase systems, phase sequence, star and delta

connections,Analysis of balanced and unbalanced 3-phase circuits, Measurement of active and reactivepower.

NETWORK THEOREMS: Source transformation, Superposition, Thevinins, Nortons, Maximum

power transfer, Reciprocity, Tellegens, Millmans and Compensation theorems for dc and ac excitations.

UNIT III: TRANSIENT ANALYSIS (16 hours)DC TRANSIENTS: Transient response of R-L, R-C, R-L-C circuits for d.c excitation initial conditions

solution using differential equations and Laplace transform approaches.AC TRANSIENTS: Transient response of R-L, R-C, R-L-C circuits for sinusoidal excitation initialconditions Solution using Laplace transform approach only.


3/25

UNIT IV: NETWORK PARAMETERS AND NETWORK FUNCTIONS (13 hours)Two port network, Impedance parameters, Admittance parameters, Transmission parameters, hybrid

parameters Inter relationship between parameters Concept of transformed network two port network

parameters using transformed variables Interconnection of two port networks, Impedance function,

admittance function, Positive real functions, Poles and zeros, Poles and zeros- time domain behavior

TEXT BOOKS01. Engineering circuit analysis by W.H.Hayt, J.E.Kimmerly, and S.M.Durbin McGraw Hill

Education private limited, 7th

Edition.

02.Fundamentals of Electric circuits byCharles K Alexander, Mathew N.O Sadiku Tata McGraw Hill.REFERENCE BOOKS

01. Network Analysis by M.E Van Valkenburg, Prentice Hall of India, 3rd Edition.02.Electric Circuits - by Mahmood Nahvi and Joselph Edminister, Schaums Outline series, TMH-

2004.


4/25




Course Title: DC MACHINES Course Code: EEE 2403L T P C

3 1 0 4COURSE OBJECTIVES:

This course enables the students to:

Learn different types of electromechanical energy conversion devices and their operating principles. Understand the basic principles and operation of DC electrical machines. Judge the performance of a given machine through testing. Comprehend the construction and speed control techniques for different types of D.C machines.COURSE OUTCOMES:

After the completion of the course, Students are able to

Understand the principle of operation, constructional details of DC machines. Analyze armature reaction which helps in investigating the performance of DC machines. Identify the DC Machine to meet various load requirements by analyzing Load characteristics of

shunt, series and Compound machines.

Analyze the speed control of D.C. motors by understanding the concepts of back e.m.f., torquedeveloped.

Understand the necessity of starters for safe starting of dc motors. Evaluate the performance of DC machine by calculating Losses and Efficiency. Design experimental procedure for testing of DC machines.

UNIT I (16 hours)DC GENERATORS CONSTRUCTION & OPERATIONDC Generators Principle of operation Action of commutator constructional features armature

windings lap and wave windings (elementary treatment only) E.M.F Equation Problems.

ARMATURE REACTION IN DC MACHINESArmature reaction Cross magnetizing and de-magnetizing AT/pole compensating winding

commutation methods of improving commutation.

UNIT II (15 hours)TYPES OF DC GENERATORSMethods of Excitation separately excited and self excited generators, Magnetization Characteristics,

Build-up of E.M.F - critical field resistance and critical speed - causes for failure to self excite and

remedial measures.

LOAD CHARACTERISTICS OF GENERATORSLoad characteristics of shunt, series and compound generators parallel operation of d.c shunt generators

load sharing, Applications.

UNIT-III (15 hours)

DC MOTORSDC Motors Principle of operation Back E.M.F. Torque equation characteristics and application ofshunt, series and compound motors.


5/25

SPEED CONTROL OF DC MOTORSSpeed control of . Motors Armature voltage and field flux control methods, Ward-Leonard system,

Construction and operation of 2 point, 3 point and 4 point starters.

UNIT-IV (14 hours)LOSSES AND EFFICIENCY OF DC MACHINESLosses Constant & Variable losses calculation of efficiency condition for maximum efficiency.

TESTING OF DC MACHINESMethods of Testing Swinburnes test- brake test Hopkinsons test Fields test Retardation test

separation of stray losses.

Text Books:1. Electrical Machines P.S. Bimbra., Khanna Publishers

2. Electric Machines I.J. Nagrath & D.P. Kothari, Tata Mc Graw Hill Publishers, 3rd

edition, 2004.

Reference Books:1. Electric Machinery A. E. Fritzgerald, C. Kingsley and S. Umans, Mc Graw-Hill Companies, 5

th

edition.

2. Performance and Design of D.C Machines by Clayton & Hancock, BPB Publishers

3. Electrical Machines: An introduction to principles and characteristics J.D Edwards.


6/25

DEPARTMENT OF ELECTRICAL & ELECTRONICS ENGINEERING



Course Title: ELECTRO MAGNETIC FIELD THEORY Subject code: EEE 2404

L T P C3 1 0 4

COURSE OBJECTIVES:This course enables the students to:

Understand vector analysis, 3-dimensional co-ordinate systems and differential elements. Apply the concepts of divergence, curl and stokes theorem in electrical systems. Distinguish between conductors, dielectrics and their behaviors in electric field. Analyze electromagnetic field using suitable laws. Understand Max wells equation for time variant and time-invariant fields. Comprehend the effect of charge & current in space

COURSE OUTCOMES:Upon completion of this course thestudents are able to:

Realize the behaviors of static charge, charge configurations in high voltage engineering. Analyze the electromagnetic field of electrical systems. Apply the field concepts to find the performance of electromagnetic system. Identify the suitable material in order to achieve improved characteristic and performance of an

electromagnetic system.

Determine the performance characteristics/equations for motor and generator operations. Design different types of capacitors like parallel plate, spherical and co-axial for alternating electric

fields.

UNIT-I FUNDAMENTALS OF ELECTROSTATICS [16 hours]Scalars and vectors, Vector Algebra, Dot product, cross product, Introduction to Cartesian, cylindrical and

Spherical coordinate system, Stokes theorem, Divergence theorem, Electrostatic Fields, Coulombs law,

Electric field Intensity due to different charge Distributions- line charge, sheet charge, continuous volume,

Concept of Electric flux density, Electric potential, potential gradient, Equi-potential surfaces.

UNIT-II APPLICATIONS OF ELECTROSTATICS [14 hours]Gauss law in Integral and point form, Applications of gauss Law, Electric Dipole, Dipole Moment,

Polarization, Potential & EFI due to Dipole, Torque on a Electric Dipole in an Uniform Electric field,

Energy stored and energy density in static electric field, Maxwells first equation (Electrostatics)

Behavior of conductors in an electric field, Current density, ohms law in point form, equation of

continuity, Capacitance, Capacitance of parallel plate and spherical capacitors, Laplaces equation and

Poissons equation, Problems on Laplaces and Poissons equations for a single variable.

UNIT-III PROPERTIES OF MAGNETIC MATERIALS [14 hours]Oersteds experiment, Magnetic force and magnetic torque, Nature of magnetic materials, Energy density

and energy stored in a magnetic field, Magnetic dipole & dipole moment, Force between two current

carrying conductors.Self and Mutual inductances, determination of self & mutual inductances, self inductance of solenoid,

toroid coils mutual inductance between a straight long wire & a square loop.


7/25

UNIT-IV STATIC AND TIME-VARYING MAGNETIC FIELD [16 hours]Static Magnetic Field, Biot-Savarts law, Magnetic Field intensity due to straight current carrying filament,

circular wire, square wire and solenoid, Relationship between magnetic flux, flux density & magnetic Field

intensity, Amperes circuital law and its applications, Amperes circuital law in point form.

Introduction to time-varying fields, Faradays Law, transformer & motional EMFs, Maxwells equations,Displacement current, Modified Maxwells equations in differential & integral form

TEXT BOOKS1. Sadiku, Elements of Electromagnetic, Second edition, Oxford University Press, 1995.

2. William H.Hayt, Engineering Electromagnetic, Tata McGraw Hill edition, 2001.

REFERENCE BOOKS1. Kraus and Fleish, Electromagnetics with Applications, McGraw Hill International Editions,

FifthEdition, 1999.

2. Clayton R. Paul and S.A Nasser, Introduction to Electromagnetic fields Tata McGraw Hill

3. Joseph A. Edminster, Mahmood Nahri Dekhrdi, Electro Magnetics Shaums outline series, 3rd

edition.4. Introduction to Electro-dynamics, David J.Griffiths, PHI.


8/25




Course Title: ELECTRONIC DEVICES AND CIRCUITS Course Code: ECE 2401

L T P C3 1 0 4

COURSE OBJECTIVES:Students undergoing this course are expected to:

Know the formation and properties of semiconductor materials Understand the operation of diode Explain the operation of transistor Know the need for biasing of transistor Know the operation of FET and MOSFET Understand the characteristics of the various types of special diodes Understand various types of rectifiers Understand the importance of regulators

COURSE OUTCOMES:After undergoing the course, students will be able to

Understand the formation and properties of semiconductor materials which forms the basis for theformation of PN diode, zener diode etc

Study the behavior of PN diodes, and its applications like rectifier, switch, clippers etc Understand the construction and operation of transistor and its usage in applications like amplifiers

etc

Know the need for biasing of transistor for the design of amplifier Understand the construction and operation of FET and MOSFET and its application on

communication systems

Study the construction, operation and applications of special diodes-Tunnel diode - Varactor diode-LED- Photo diode UJT- SCR.

Design half wave and Full wave rectifiers Design of regulated power supply.

UNIT-I: SEMICONDUCTORS - DIODES (14 hours)

Review of semi conductor Physics- mobility, conductivity n and p type semi conductors, Mass Action

Law, Fermi level in intrinsic and extrinsic semiconductors, Effect of temperature on Fermi level.

Formation of PN junction, open-circuited p-n junction, Energy band diagram of PN diode, PN diode

(forward bias and reverse bias), Volt-ampere characteristics of p-n diode, Temperature dependence on VI

characteristic, Transition and Diffusion capacitances, Breakdown Mechanisms in Semi Conductor

(Avalanche and Zener breakdown) Diodes, Zener diode characteristics.

UNIT- II: BJT BIASING . (16 hours)

Junction transistor, Transistor current components, Transistor as an amplifier, Relation between Alpha and

Beta, Input and Output characteristics of Common Base and Common Emitter configurations, BJT biasing,

criteria for fixing operating point, Fixed bias, Collector to base bias, Self bias techniques for stabilization,Stabilization factors, (S, S', S'), Compensation techniques, (Compensation against variation in VBE, Ico)

Thermal run away, Thermal stability


9/25

UNIT-III: FET-SPECIAL SEMICONDUCTOR DEVICES (14 hours)FET characteristics (Qualitative and Quantitative discussion), FET biasing, MOSFET characteristics

(Enhancement and depletion mode), FET as VVR. Characteristics of Tunnel Diode with the help of energy

band diagrams, Varactor Diode, LED, photo diode, UJT characteristics, SCR characteristics.

UNIT- IV: REGULATED POWER SUPPLIES (16 hours)Half wave rectifier, full wave rectifier, Harmonic components in a rectifier circuit, Inductor filter,

Capacitor filter, L- section filter, - section filter, Multiple L section and Multiple section filter, and

comparison of various filter circuits in terms of ripple factors, Basic Regulator Circuit, Series voltage

regulator, Shunt regulators Short Circuit Protection, Current Limiting, Specifications of Voltage Regulator

Circuits. Design of regulator using zener diode and Transistors.

TEXT BOOKS:1. Electronic Devices and Circuits J.Millman, C.C.Halkias, Tata McGraw Hill, 2nd Ed., 1991.

2. Electronic Devices and Circuits R.L. Boylestad and Louis Nashelsky, Pearson/Prentice Hall,

9th

Edition, 2006.

REFERENCE BOOKS:1. Electronic Devices and Circuits, B. Visvesvara Rao, K. Bhaskara Rama Murty, K. Raja Rajeswari,

P.Chalam Raju Pantulu, 2/e Pearson Education, 2007.

2. Principles of Electronic Circuits S.G.Burns and P.R.Bond, Galgotia Publications, 2nd Edn., 1998.

3. Microelectronics Millman and Grabel, Tata McGraw Hill, 1988.

4. Electronic Devices and Circuits, P. John Paul, New Age International publishers, 2007.


10/25




Course Title: BASIC PRIME MOVERS AND PUMPS Course Code: ME 2416

L T P C3 1 0 4

COURSE OBJECTIVES:The course content enables students to:

Get the idea about impact of jet on the vanes. Get the idea about working of different hydraulic turbines. Get the idea about working of different hydraulic pumps. Get the idea about, otto, Diesel, Rankine, Joule Cycles Get the idea about working principle of steam turbines and gas turbines Get the idea of the working principle of steam turbines and gas turbines.

COURSE OUTCOMES:After the completion of the course, students are able to Understand the concepts of hydrodynamic force of jets on stationary and moving flat inclined and

curved vanes.

Apply the concepts of momentum equation for finding the forces acting on the vanes of theturbines.

Understand the carnot, otto, Diesel, Rankine, Joule Cycles. Apply the otto, Diesel cycles for finding the performance of S.I and C.I engines. Understand the working principle of steam turbines and gas turbines. Evaluate the performance characteristics of steam and gas turbines. Understand the working principle of centrifugal and reciprocating pumps. Evaluate the performance characteristics of centrifugal and reciprocating pumps.

UNIT-I: Basics of Turbo Machinery (16hours)

Hydrodynamic force of jets on stationary and moving flat inclined and curved vanes, jet striking centrally

and at tip, velocity diagrams, work done and efficiency.

Hydraulic Turbines:Classification of turbines, impulse and reaction turbines, pelton wheel, Fancis turbine and Kaplan turbine,

wok done, efficiency and draft tube theory.

UNIT-II: Thermo dynamic cycles (14 hours)

Carnot, otto, Diesel, Rankine, Joule Cycles- Description and representation on P-V diagram.

IC Engines: Working of petrol and Diesel Engines- Two stroke and four stroke engines- Comparison

UNIT-IIISteam Turbines (15 hours)Classification Impulse and reaction turbines principle of operation simple impulse turbine, velocity

compounding, pressure compounding and pressure velocity- compounding.

Gas turbines: Simple gas turbine plant, principle of working, Ideal and actual cycles Open and closes

cycles.

UNIT-IV:Pumps (15 hours)Reciprocating Pumps: Working, Discharge, slip and indicator diagrams


11/25

Centrifugal Pumps: Classification, working, workdone- manometric head- losses, efficiencies &specificspeed.

TEXT BOOKS:1) Fluid Mechanics & Hydraulic Machines by Modi & Seth, PHI Publications.2) Engineering Thermodynamics by P K Nag, Tata McGraw-Hill Companies.

REFERENCE BOOKS:1) Fluid Mechanices & Hydraulic Machines- by R.K.Bansal, Laxmi Publications.

2) Thermodynamics & Heat Engines by B.Yadav, Central Book Depo, Allahabad.

3) I C Engines by V Ganeshan, Tata McGraw-Hill Companies.


12/25




Course Title: ELECTRONIC DEVICES AND CIRCUITS LAB Course code: ECE 2204L T P C

0 0 3 2COURSE OBJECTIVES:This lab course is intended to

Know the usage of electronic equipment Know the testing of components Understand the PN diode operation in forward and reverse bias Know the characteristics of Half and Full wave rectifier with and without filters Know how to connect transistor in CB,CE configurations

COURSE OUTCOMES:After undergoing this lab course, students will be able to:

Students will get the basic concepts of passive components and their configurations and about howto use electronic equipments such as function generator, CRO, regulated power supply etc.

Understand applications of a diode and its characteristics and also various parameters such as ripplefactor, percentage regulation are calculated for analysis.

Understand the behavior of transistor in CB,CE configurations and design of CE self bias circuit The students will be able to know the rectifiers, filters, so that they can design D.C. Regulated

power supplies of required voltage and current rating.

Emphasis is on the design concepts and the general practical problems encountered. Designconcepts are complemented with relevant theory and mathematics. Students will be able to design

and fabricate amplifiers

(For Laboratory examination Minimum of 10 experiments)

Identification and Testing of Components

Demonstration of Measuring Instruments1. PN Junction diode characteristics A. Forward bias B. Reverse bias.2. Zener diode characteristics3. Transistor CB characteristics (Input and Output)4. Transistor CE characteristics (Input and Output)5. Half wave rectifier, half wave rectifier with capacitor filter.6. Full wave center tapped rectifier with and without capacitor filter.7. FET characteristics8. Design of self bias for CE configuration9. Design of Zener regulator.10.Design of series voltage regulator.11.Design of shunt voltage regulator.12.UJT characteristics


13/25


B B.Tech (EEE)- 3rd semester


Course Title: Basic Prime Movers and Pumps Lab Course Code: ME 2217

L T P C0 0 3 2

COURSE OBJECTIVES:The course content enables students to:

To understand the importance and the role of Fluid mechanics and Hydraulic Machines lab in thefield of power generation.

Able to measure the flow rate through pipe, To determine head loss due to friction in pipes and verifying Bernoullis principle. Understand how to conduct performance tests on turbines and centrifugal pumps. Gives the information how to find the Reynoldss number for deciding whether the flow is laminar,

turbulent (or) transition flow.

To gain knowledge about, how to conduct performance test for turbines and pumps.COURSE OUTCOMES:After the completion of the course, students are able to

To understand the theoretical concepts by doing experiments.

to perform the verification Bernoullis theorem, finding co-efficient of discharge for theventurimeter, orifice meter and rotameter

Finding head loss due to friction in pipes based on Dracy weisbach equation. Analyses the performance characteristics curves of different turbines and centrifugal pump.

List of Experiments (Any 10 Experiments from the following)01 Calibration of Venturimeter.02 Calibration of Orificemeter.03 Calibration of pitot tube04 Determination of friction coefficient for a given pipe line05 Calibration of Rotameter06 Verification of Bernoulis theorem07 Experiment on Reynolds apparatus08 Impact of Jets on Vanes09 Performance Test on Multistage Centrifugal pump10 Performance Test on Reciprocating pump11 Performance Test on Kaplan Turbine12 Performance Test on Francis Turbine13 Performance Test on Pelton Turbine


14/25


B.Tech (EEE)


Course Title: COMPLEX ANALYSIS Course Code: MATH 2403L T P C

3 1 0 4

COURSE OBJECTIVES :

Students undergoing this course are expected to:

Learn to solve linear system of equations Understand the concepts of Limit, Differentiation and Integration with reference to complex

variables.

Perform a comparative study regarding the Elementary Complex functions and Real functions. Evaluate definite integrals involving complex variables in a simpler means by applying the integral

theorem of complex variables, power series expansions and residue theory.

Derive the Argument Principle and Rouches theorem by using Residue theorem. Understand the conformal mappings and their importance in engineering domain.

COURSE OUTCOMES :After undergoing the course, Students will be able to understand

Apply Knowledge of Linear equations by different methods in image processing problems usingmatrices

Solve problems on eigen values and eigen vectors which are related to pattern recognition andclassification in image processing.

Solve problems on complex differentiation and integration related to antennas design, microwaveengineering, stochastic processes.

Compare the real and complex functions and apply the techniques in complex function problems intransmission lines, control systems, signal processing and electromagnetic field theory.

Solve problems on complex power series in signal analysis. Solve problems on Singular point concepts useful in control systems, signals and systems. Solve problems on Laurent series - Residue theorem which is applicable in signal processing and

communications.

Solve problems on Conformal mapping which are useful in image enhancements, image morphing,image slicing etc. in image processing.

Solve problems on bilinear transformation which is useful to convert analog transfer functions intodigital transfer functions for digital system design in digital signal processing.

Able to transform s- domain transfer function into Z- domain transfer function for statistical signalprocessing, Bio medical signal processing.

UNIT ILinear systems of equations: Rank-Echelon form, Normal form Solution of Linear Systems by Rank,

Gauss-Jordan and Gauss elimination methods Eigen values - Eigen vectors Properties (statements)

Cayley-Hamilton Theorem (without proof) - Inverse and powers of a matrix by using Cayley-Hamilton

theorem. (11+4 Periods)

UNIT-IIFunctions of a complex variable Continuity Differentiability Analyticity Properties Cauchy-

Riemann equations in Cartesian and polar coordinates (without proof).Harmonic and conjugate harmonic

functions Milne Thompson method.


15/25

Elementary functions: Exponential, trigonometric, hyperbolic functions and their properties General

power ZC

(c is complex), principal value.

Complex integration: Line integral evaluation along a path and by indefinite integration Cauchys

integral theorem, Cauchys integral formula Generalized integral formula.

Complex power series: Radius of convergence Expansion in Taylors series, Maclaurins series andLaurent series. (12+3 Periods)

UNIT-IIISingular point Isolated singular point pole of order m essential singularity.

Residue Evaluation of residues - Laurent series - Residue theorem.

Evaluation of integrals of the type

(a) Improper real integrals

dxxf )( (b) +

2

)sin,(cosc

cdf

(c)

dxxfeimx )( (d) Integrals by identation. (11+4 Periods)

UNIT-IVArgument principle Rouches theorem determination of number of zeros of complex polynomials -

Maximum Modulus principle - Fundamental theorem of Algebra, Liouvilles Theorem. (Theorems without

proofs)

Conformal mapping: Transformation by ze , lnz, z2, z n (n positive integer), Sin z, cos z, z + a/z,

Translation, rotation, inversion and bilinear transformation fixed point cross ratio properties

invariance of circles and cross ratio determination of bilinear transformation mapping 3 given points .

(11+4 Periods)

TEXT BOOKS1. Higher Engineering Mathematics B. S. Grewal, Khanna Publishers, New Delhi

2. Engineering Mathematics, B.V.Ramana, Tata McGraw HillREFERENCE BOOKS

1. Engineering Mathematics Volume-III, T.K.V Iyengar, & others, S.Chand Co. New Delhi.2. Advanced Engineering Mathematics, Irvin Kreyszig, Wiley India Pvt. Ltd.3. A text Book of Engineering Mathematics, Shahnaz Bathul, Prentice Hall of India.


16/25

DEPARTMENT OF ELECTRICAL& ELECTRONICS ENGINEERING

B.Tech (EEE)- 4th semester


Course Title: LINEAR SYSTEM ANALYSIS Subject code: EEE 2405L T P C

3 1 0 4COURSE OBJECTIVES:This course enables the students to

Differentiate between continuous and discrete time signals Perform the comprehensive analysis of different systems in both time and frequency domain. Derive models of dynamic systems and obtain their transfer functions. Classify the different transformations to find the system response to reduce computationalcomplexities. Understand the system response under continuous and discrete time domain.COURSE OUTCOMES:After the completion of the course, students are able to Interpret system functions through various time domain and frequency domain analysis. Analyze the concepts of Sampling theorem and Reconstruction of signal. Evaluate different transformation techniques to convert continuous to discrete time system. Emphasize on Fourier spectrum of signal and its application in signal processing.

UNIT-IMATHEMATICAL DESCRIPTION AND ANALYSIS OF SIGNALS (15 hours)Continuous-Time Signal Functions, Discrete-Time Signal Functions, Signal Energy and Power, System

characteristics, Convolution sum, Convolution integral and their evaluation, analysis of LTI Systems based

on convolution and differential equations.

LAPLACE TRANSFORMThe Laplace transforms and its properties, Inverse Laplace transform, Solutions of differential equations

with initial conditions.

UNIT-II

STATE VARIABLE ANALYSIS (13 hours)Choice of state variables in Electrical networks-Formulation of state equations for Electrical networks-

Equivalent source method. Network topological method - Solution of state equations-Analysis of simple

networks with state variable approach.

UNITIII FOURIER SERIES AND FOURIER TRANSFORM REPRESENTSATION(16 hours)Introduction, Trigonometric form of Fourier series, Exponential form of Fourier series, Wave symmetry,

Fourier integrals and transforms, Fourier transform of a periodic function , Properties of Fourier

Transform, Parsevals theorem , Fourier transform of some common signals, Fourier transform relationship

with Laplace Transform, Application in Circuit Analysis.

UNIT-IV SAMPLING & Z-TRANSFORMS (16 hours)Sampling theorm Graphical and Analytical proof for Band Limited Signal impulse sampling, natural andFlat top Sampling, Reconstruction of signal from its samples, effect of under sampling Aliasing,

introduction to Band Pass sampling

Z-TRANSFORMS


17/25

The Z transform and its properties, Region of convergence in Z-Transforms, constraints on ROC for

various classes of signals, Inverse Z-Transform.

TEXT BOOKS

1. Signals, Systems and Communications by B.P. Lathi, BS Publications 2003.2. Engineering Network Analysis and Filter Desgin- Gopal G Bhise, Prem R. Chadha, Umesh Publications.

REFERENCE BOOKS1. Linear System Analysis A N Tripathi, New Age International.

2. Network and Systems D Roy Chowdhary, New Age International.

3. Network Analysis and Synthesis Umesh Sinha- Satya Prakashan Publications

4. Linear system anlysis by A.Cheng, Oxford publishers.


18/25




Course Title: POWER GENERATION & DISTRIBUTION Course Code: EEE 2406L T P C

3 1 0 4COURSE OBJECTIVES:

This course enables the students to

Understand key concepts of power generation using various sources like Thermal, hydro and nuclearenergy.

Comprehend different types of substations like Air insulated substations, Indoor & Outdoorsubstations, Gas insulated substations.

Learn the economic aspects of power generation like load curve, demand, diversity and plantutilization factors etc.

Comprehend proper methodology for power tariff. Understand parameters of DC and AC power distribution systems

COURSE OUTCOMES:After the completion of the course, students are able to

Understand the operation of thermal, gas, nuclear power generation. Understand safety issues in nuclear power generation. Design parameters of DC and AC power distribution systems. Analyze different types of equipment used in substation. Design layout of substation. Understand the need of Gas Insulated Substations. Evaluate running , fixed costs of power generation Design proper methodology for power tariff.

UNIT I

THERMAL POWER STATIONS (16 hours)Line diagram of Thermal Power Station (TPS) showing paths of coal, steam, water, air, ash and flue

gasses, Brief description of TPS components, Boilers, Super heaters, Economizers, Turbines, Condensers,

Cooling towers, and Chimney.

NUCLEAR POWER STATIONSWorking principle, nuclear fuels, Nuclear reactor Components, Moderators, Control rods, Reflectors and

Coolants, Types of Nuclear reactors and brief description of PWR, BWR and FBR, Radiation-Radiation

hazards and Shielding.

UNIT II ` (16 hours)

DISTRIBUTION SYSTEMSClassification of distribution systems, design features of distribution systems, radial distribution, and ring

main distribution. Voltage drop calculations-DC distributors - radial DC distributor fed at one end and at

two ends (equal / unequal voltages) and ring distributor (Concentrated loading only).AC distributors - radial AC distributor fed at one end, Methods of solving AC distribution problems-

Power factors referred to receiving end voltage and respective loads, Comparison of DC and AC

distribution.


19/25

UNIT-III (10hours)

SUBSTATIONSClassification of substations- Air insulated substations - Indoor & Outdoor substations, Bus bar

arrangements - single bus bar, sectionalized single bus bar, double bus bar with one and two circuit

breakers, main and transfer bus bar system with relevant diagrams, substation layout, Gas insulatedsubstations (GIS) Advantages of GIS, Comparison of Air and Gas insulated substations, Single line

diagram of GIS.

UNIT-IV (12 hours)

ECONOMIC ASPECTS OF POWER GENERATIONLoad curve, load duration and integrated load duration curves, discussion on economic aspects- connected

load, maximum demand, demand factor, load factor, diversity factor, capacity factor, utilization factor,

capacity, utilization and plant use factors- Numerical Problems.

TARIFF METHODSCosts of Generation - Fixed, Semi-fixed and Running Costs, Desirable Characteristics of a tariff, Tariff

Methods- Simple rate, Flat Rate, Block-Rate, two-part, three-part, and power factor tariff methodsTEXT BOOKS:

1. Generation, Distribution and Utilization of Electric Energy by C.L.Wadhawa New AgeInternational (P) Limited, Publishers 2002.

2. Power system Analysis by Jhon J Granger and William D Stevenson, McGraw Hill Company LtdREFERENCE BOOKS:

1. Electrical Power Generation, Transmission and Distribution by S.N.Singh., PHI, 2003

2. Elements of Power Station design and practice by M.V. Deshpande, Wheeler Publishing.

3. Electrical Power Engineering by Olle I Elgerd, Springer Publishers, 2nd

edition.


20/25




Course Title: TRANSFORMERS AND INDUCTION MACHINES Subject code: EEE 2407L T P C

3 1 0 4


Understand different types of transformers and induction motors - construction and testing. Analyze different types of induction motors with their performance characteristics and speed

control techniques.

Evaluate the various characteristics of ac machines for industrial applications. Learn the construction and principles of poly phase transformers and induction motors Understand the starting methods of induction motors.

COURSE OUTCOMES:Upon completion of this course thestudents are able to:

Apply the three phase induction motor and transformer in the industrial needs like electricaldrives and agricultural pumps etc.

Understand parallel operation of transformer to improve the load sharing capabilities andreliability.

Identify three phase transformers and auto transformers used in substations, industries etc. Analyze equivalent circuits of three phase transformers for power systems analysis. Investigate different speed control methods of three phase induction motors essential for

industrial drives.

Understand the different testing methods for evaluating the efficiency of the transformers andinduction motors.

UNIT-I (14 Hours)

CONSTRUCTION & OPERATION OF SINGLE PHASE TRANSFORMERSSingle phase transformers- types-constructional details-Ideal Transformer-Practical Transformer -e.m.f

equation - operation on no-load and on-load - phasor diagrams,Equivalent circuit

PERFORMANCE OFSINGLE PHASE TRANSFORMERSLosses - effect of supply voltage & frequency on iron losses-efficiency-regulation-All day efficiency

UNIT-II (16 Hours)TESTING OF SINGLE PHASE TRANSFORMER: Predetermination of efficiency and regulation - OC

and SC tests, Sumpners test -separation of losses.

PARALLEL OPERATION OF TRANSFORMERS: Parallel operation with equal and unequal voltageratios.

AUTOTRANSFORMERS:Auto transformers-equivalent circuit-comparison with two windingtransformers.

POLYPHASE TRANSFORMERS :Poly-phase transformers Poly-phase connections - Y/Y, Y/, /Y,

/ and open -Three winding transformers (equivalent circuit only), vector groups, Scott connection.

UNIT-III

THREE-PHASE INDUCTION MACHINES (16 Hours)


21/25

Three-phase induction motors-constructional details of cage and wound rotor machines-production of

rotating magnetic field - principle of operation - rotor e.m.f and rotor frequency - rotor reactance, rotor

current and p.f at standstill and during operation.

CHARACTERISTICS OF INDUCTION MACHINES

Rotor power input, rotor copper loss and mechanical power developed, torque equation- expressions formaximum torque and starting torque, torque-slip characteristics, double cage and deep bar rotors,

equivalent circuit, Crawling and cogging.

UNIT-IV

CIRCLE DIAGRAM OF INDUCTION MOTOR (14 Hours)Circle diagram, no-load and blocked rotor tests-predetermination of performance characteristics, Methods

of starting, Calculation of starting current and torque.

SPEED CONTROL METHODSSpeed control-change of frequency, pole changing methods, and cascade connection. Voltage injection into

rotor circuit (qualitative treatment only)

TEXT BOOKS:1. Electrical Machines P.S. Bimbra., Khanna Publishers

2. Electric Machines by I.J. Nagrath & D.P. Kothari, Tata Mc Graw Hill Publishers, 3rd

edition, 2004.

REFERENCE BOOKS:1. Electric machinery - A.E. Fitzgerald, C.Kingsley and S.Umans, Mc Graw Hill companies, 5

thedition

2. Performance and Design of AC Machines by MG.Say, BPB Publishers

3. Electric Machinery Fundamentals Stephen J.Chapman, Tata Mc Graw-Hill Publishers, 4th

edition.


22/25


B.Tech- 4th

Semester


Course Title: DIGITAL ELECTRONICS AND MICROPROCESSORS Course Code: ECE 2413

L T P C3 1 0 4

COURSE OBJECTIVES:Students undergoing this course are expected to:

Understand the different number system, its conversions and binary arithmetic. Know the fundamentals of Boolean algebra and theorems, Karnaugh maps including the

minimization of logic functions to SOP or POS form. To strengthen the principles of logic design and use of simple memory devices, flip-flops, and

sequential circuits.

To fortify the documentation standards for logic designs, standard sequential devices, includingcounters and registers.

To understand the logic design of programmable devices, including PLDs The basic knowledge of Microprocessor & Interfacing by understanding the architecture of

8086 processor family

To learn assembly language programming and interfacing To interface Microprocessor with various modules like 8253 programmable interval timers ,

8255 PPI, 8257 DMA, 8259 programmable interrupt controller and serial and parallel I/O

COURSE OUTCOMES:After undergoing the course students will be able to:

Differentiate between analog and digital representations. Convert a number from one number system to its equivalent in of the other Number system. Understand the difference between BCD and straight binary. Implement logic circuits using basic AND, OR and NOT gates. Use De-Morgans theorem to simplify logic expressions. Describe the concept of active LOW and active HIGH logic signals. Use Boolean algebra and K-map as tool to simplify and design logic circuits. Construct and analyze the operation of flip-flop and troubleshoot various types of flip-flop

circuits.

Design the high speed communication circuits using serial bus connection. Introduce the design of basic I/O hardware and microprocessor interfacing: memory chip selection, memory expansion, I/O interfacing, different I/O techniques: polling, interrupts, DMA

UNIT- I: NUMBER SYSTEMS AND BOOLEAN ALGEBRA (14 hours)Review of number systems, conversion of numbers from one radix to another radix, complement

representation of negative numbers-binary arithmetic, 4-bit codes: BCD, Excess-3, Floating point

representation(IEEE 754 Standard), Fixed point representation, Basic logic operations.

Basic theorems and properties of Boolean Algebra, switching functions, Canonical and Standard

forms-Algebraic simplification digital logic gates, universal gates and Multilevel NAND/NOR realizations,Generation of self dual functions. Minimization of switching functions using K-Map up to 4-variables,

minimal SOP and POS Realization.

UNIT- II : SIMPLE PLDS AND SEQUENTIAL CIRCUITS (16 hours)


23/25

Basic PLDs-PLA, PAL, Realization of Switching functions using PLDs, comparison of PLA, and

PAL. Classification of sequential circuits (synchronous and asynchronous): basic flip-flops, truth tables

and excitation tables (NAND RS latch, NOR RS latch, RS flip-flop. JK flip-flop, T flip-flop, D flip-flop

with reset and clear terminals).Conversion of flip-flops.

Design of registers, Buffer register, Control buffer register, Shift register, Bi-directional shiftregister, Universal shift register. Design of Asynchronous & Synchronous counters - Up, Down, Up down,

Johnson counters, Ring counters

UNIT III: INTRODUCTION TO MICROPROCESSORS AND MEMORIES (15 hours)Introduction to 8086 microprocessors, Architecture of 8086 Microprocessor. Special functions of General

purpose registers.8086 flag register and function of 8086 Flags. Addressing modes of 8086. Instruction set

of 8086. Assembler directives, simple programs, procedures, and macros.

Memories:RAM, ROM, PROM, Static And Dynamic Memories-Memory Addressing-Interfacing Memory

To CPU.

UNIT IV: INTERFACING WITH MICROPROCESSORS (15 hours)Peripheral ICs : Pio-8255a(ppi) block diagram and operating modes, key board/display device : 8279 block

diagram and its operation. Interfacing with stepper motor. Data converters: various types of dia and a/d

converters.D/A and A/D converter Interfacing.

TEXT BOOKS:1. Digital Design Morris Mano, PHI, 3rd Edition, 2006.

2. Fundamentals of Logic Design Charles H. Roth, Thomson Publications, 3rd

Edition.1998

3. Advanced microprocessor and Peripherals - A.K.Ray and K.M.Bhurchandi, TMH, 2000.REFERENCE BOOKS:

1. Switching & Finite Automata theory Zvi Kohavi, TMH,2nd Editio

2. Micro Processors & Interfacing Douglas U. Hall, 2007.3. The 8088 and 8086 Micro Processors PHI, 4th Edition, 2003.


24/25




Course Title: DC Machines Lab Subject code: EEE 2208L T P C

0 0 3 2


Evaluate the performance of DC machines by conducting no-load and on-load tests. Investigate maximum efficiency condition in DC machines under various loading conditions. Learn how to regulate the speed control of DC machine using various methods. Estimate and separate the various losses of DC machine by performing different tests. Understand the various performance characteristics of DC machines.COURSE OUTCOMES:After the completion of the course, students are able to

Apply the practical methods to find the performance of various types of DC machines. Identify a suitable method to find out performance characteristics of a DC machine. Investigate a suitable DC machine based on its performance characteristics. Design the circuits for safe operation of DC Machines. Apply the speed control techniques of DC motors.

Note: Eight experiments are to be conducted from PART-A and Two from PART-B

PART-A1. Magnetization characteristics of DC shunt generator.

2. Load test on DC shunt generator.

3. Load test on DC series generator.

4. Load test on DC compound generator.

5. Hopkinsons test on DC shunt machines.6. Fields test on DC series machines.

7. Swinburnes test.

8. Speed control of DC shunt motor.

9. Brake test on DC shunt motor.

10. Load test on DC series motor.

PART-B1. Retardation test on DC shunt motor.

2. Separation of losses in DC shunt motor.

3. Load test on DC compound motor.


25/25


B.Tech-4th Semester


Course Title: Electric Circuits & Simulation Lab Subject code: EEE 2209

L T P C

0 0 3 2COURSE OBJECTIVES:This course enables the students to:

Construct and verify various electrical circuits applying network theorems. Learn different locus diagrams for various electrical circuits like RL,RC and RLC. Analyze different models of electric circuits through simulation by using PSPICE and MATLAB

software.

Understand the concepts of resonating conditions in series and parallel circuits. Evaluate the various electrical and electronic parameters using two port networks.COURSE OUTCOMES:Upon completion of this course thestudents are expected to:

Analyze various theorems for linear DC and AC electrical circuits. Evaluate two port network parameters for various electrical circuits. Analyze the transient and steady state behavior of a circuit using MATLAB / PSPICE software. Understand the performance of an ac circuit during resonance conditions. Design the time constants of an electrical circuit for satisfactory performance during transient.

Note: Eight experiments are to be conducted from PART-A and any Two from PART-B

PART-A: ELECTRIC CIRCUITS1) Verification of Thevenins and Nortons Theorems.

2) Verification of Superposition theorem.

3) Verification of Maximum Power Transfer Theorem.

4) Verification of Reciprocity Theorem.

5) Series and Parallel Resonance.

6) Determination of Self, Mutual Inductances and Coefficient of coupling.

7) Determination of Z and Y Parameters.

8) Determination of Transmission and hybrid parameters.

9) Measurement of Reactive Power for star and delta connected balanced loads.

10) Measurement of 3-phase active Power by two Wattmeter Method for Unbalanced loads.

PART-B: PSPICE SIMULATION OF ELECTRIC CIRCUITS1) Simulation of DC Circuits

2) DC Transient response

3) Mesh and Nodal Analysis4) Verification of Network Theorems

5) Simulation of AC Circuits

Documents

B.tech EEE Syllabus 3rd&4th Sem