ACNC/TotalPlex®

HTTP ://WWW .HOMEPHONE .COM EMAIL : INFO@HOMEPHONE .COM 1989 UNIVERSITY LANE (Unit H), Lisle, IL 60532 TEL: (630) 241-2800 FAX: (630) 241-2820

DP29-SW/IM

Telephone Keypad Relay Trigger

DESCRIPTION

The Telephone Keypad Relay Trigger combines 2 former products into 1 device. Just by changing jumper settings, the DP29-SW or the DP29-IM can be selected. Both devices modify the telephone keypad to enhance your DoorBell Fon system. DP29-SW: The Outbound Relay Trigger Controller will enhance the existing DoorBell Fon system by providing dry contact closure off the star (*) key or any other key selected by the DIP switch S1. This product is a great add-on that will trigger any electrical devices

that you may want to operate from your telephone just by pressing a keypad button. The DP29-SW is also known as the Door Strike Controller . DP29-IM: The Intercom Module will enhance the existing DoorBell Fon system by converting all the phones in your home or office into an intercom system. No new wiring is required and no intercom installation is necessary. There is no programming required either. This module uses your existing phones and wiring without additional connections.

FEATURES

• New design footprint allows the DP29-SW/IM to be mounted in any structured wiring cabinet or even on the

wall • Jumper 4 allows easy selection between NO (normally open) and NC (normally closed) switches for customized

installation • S1 Dipswitch allows use of other

keypad buttons other than the default (*) key

• No external power source required • Simple wiring procedure in series

with the Door Station • Jumpers 5 and 6 can be removed to

switch from the DP29-SW to the DP29-IM

DP29-SW: • Able to operate any electrical device

from 1.0 Amps at 125 VAC or 2.0 Amps at 30 VDC

• 3+ seconds of dry contact provided using the selected key on the phone (contact time may be extended by simply holding the selected key)

DP29-IM: • Intercom call is initiated by a press of

a keypad button • No programming required • Compatible with wireless phones • Only 1 unit required to operate all

phones

DIP Switches: Determines which keypad button is used (default is for the (*) key which is up, down, up, up)

Jumper 5: Remove Jumper 5 and Jumper 6 in order to switch the device from DP29-SW to DP29-IM

Jumper 6: Remove Jumper 5 and Jumper 6 in order to switch the device from DP29-SW to DP29-IM

Jumper 4: Selects between NO (normally open) and NC (normal closed) switches (default is NO)

Terminal 1: DP29-SW: Connect to the Door Station Controller, DP29-IM: Connect Door1 to DOOR 1 terminal of the Door Station Controller

Terminal 2: DP29-SW: Connect to the Door Station, DP29-IM: Do not connect

Terminal 3: DP29-SW: Connect to the electronic lock or door strike, DP29-IM: Connect Door2 to DOOR 2 of the Door Station Controller

ACNC/TotalPlex®

HTTP ://WWW .HOMEPHONE .COM EMAIL : INFO@HOMEPHONE .COM 1989 UNIVERSITY LANE (Unit H), Lisle, IL 60532 TEL: (630) 241-2800 FAX: (630) 241-2820

DP29-SW/IM

Telephone Keypad Relay Trigger

APPLICATIONS

One Outbound Relay Trigger with Door Strike and Door Station and One Intercom Module

DP29-SW: • Opening electronic gates and locks • Multiple DP29-SW’s can be used for

multiple door stations DP29-IM: • Converts your existing home or office

phone network into an intercom system

SPECIFICATIONS

Power: • None Dimensions: • 5.750” x 2” x 0.875” • 6” x 2.188” x 1.750” (w/ dust cover)

• 6.875” x 2” (base w/ butterfly clips)