Budgit Hoist Pricebook - Grúa viajera

Price & SPecification Book

©2010 Budgit Hoists and Tugit, Divisions of Columbus McKinnon Corporation

Phone: 800.477.5003

Fax: 800.374.6853

www.cmworks.com

Schedule # 15025 Prices effective July 1, 2010

CONSUMER PRICE LIST

TUGIT®

Table of Contents

Returns Policy Operation Service & Parts Manual OSHA Compliance WarrantyRETURNSCMCO will not accept returned goods without prior written consent and accompaniment of returned goods tags.

In the event of return of material, agreement will be necessary with CMCO as to the basis for the return charges involved, and issuance of return authorization tags and forms, which must accompany all returns.

Any deviation from the above shall not be acceptable to CMCO, except in writing by authorized CMCO personnel.

OPERATION, SERVICE AND PARTS MANUALOne copy of the operation, service and parts manual of each line item will be supplied and included in the shipment of each item, without charge, as standard policy for each item of equipment covered by the buyer's purchase order.

Additional copies of the manuals are available at extra cost.

OSHAEach BUDGIT and TUGIT product at the time of manufacture is built in accordance with our interpretation of the applicable sections of the American National Standards Institute Safety Standard B30.16, "Overhead Hoists," B30.21 "Manually Lever Operated Hoists," the Federal Occupational Safety and Health Act – 1970 and the National Electric Code ANSI/NFPA 70.

The National Electric Code requires additional protection on units used in certain applications. It is the owner and user's responsibility to determine the suitability of a product for a particular application. Electric hoists must be installed in accordance with the National Electric code as well as other state and local codes and regulations.

Product .............................................................PageElectric Hoists Hoists (BEHC) ..............................................................3-5 Motor Driven Trolleys ...................................................... 6 Options ......................................................................7-11 ShopHoist ................................................................12-13

Manual Trolleys ..........................................................14-17

Cast Iron Wheel Trolleys ................................................ 18

Standard Beam Sizes ..................................................... 19

Air Hoists 600 Series .................................................................... 20 Air Wire Rope Manipulator ........................................... 20 2200 Series .............................................................21-22 6000 Series .............................................................23-24 Motor Driven Trolleys .................................................... 25 Accessories .............................................................25-27

Crane Kits Push Type Underhung & Top-Running ......................... 28 Handgeared Underhung ............................................... 29 Handgeared Top-Running ............................................ 30 Motorized Underhung .............................................31-32 Motorized Top-Running ................................................ 33 Options ....................................................................34-36

Tractor Drives ................................................................. 37

Hand Chain Hoists Series USA Hoists ...................................................38-42 Loadlifter Series 622 .................................................... 43 Model AM Army Type Trolley Hoist .............................. 43

Lever Operated Hoists Series 653 ................................................................... 44 Series 602 & 603 ......................................................... 44

Z Hoist Program ........................................................45-50

Budgit Test Stand ........................................................... 49

Clearance Diagrams ....................................................... 51

Hoist & Component Check List ................................52-53

Specification Sheet ...................................................54-55

3

IMPORTANTThis Price List supersedes all pricing information of earlier dates.

All prices are F.O.B. Wadesboro, NC unless otherwise noted and are subject to change without notice. Net prices are furnished as trade information only and not as a restriction on resale pricing.

Orders subject to final acceptance at our General Offices, Wadesboro, NC. All prices herein are List Consumer Prices.

All inquiries regarding Customer Service and Order Entry Should be directed to the CMCO Customer Service Department.

Electric Chain Hoist Ordering Information

SPECIFY THE FOLLOWING

• Hoist Model • Voltage • Chain Container • Single, Two Speed or Variable Frequency • Phase • Beam Size/Flange Width • Lift • P.B. Drop • Options • Suspension • Power Cord • Accessories

VOLTAGE OPTIONS

Single Speed Two Speed Variable Frequency 115/230-1-60 200/208-3-60 230-3-60 200/208-3-60 230-3-60 460-3-60 230/460-3-60 460-3-60 575-3-60 575-3-60

NOTE: 50 Hertz available, see page 8 Non-Neutral 230v single phase source voltage must be specified at time of order.

Consult factory for Voltages not listed

How To Specify Electric Chain Hoist Model Numbers

BEHC 01 16 - 10 HK - 1

BEHC 01 16 10 HK 1BudgitElectric

Hoist

Capacity

25 = ¼ ton50 = ½ ton01 = 1 ton02 = 2 ton03 = 3 ton

Speeds (fpm)04 = 408 = 8

16 = 1632 = 3264 = 64

Hoist Voltage& Speeds

1 = 115/230 V (1-spd)*†2 = 230 V (2-spd)3 = 230/460 V (1-spd)*4 = 460 V (2-spd)5 = 575 V (1-spd)6 = 575 V (2-spd)7 = 200/208 V (1-spd)8 = 200/208 V (2-spd)9 = 230 V (VFC) - Hoist Only10 = 460 V (VFC) - Hoist Only

Lift (ft)

10 = 1015 = 1520 = 2025 = 25

Etc.

SuspensionHK = Hook Mount Link ChainLG = Lug mounted onlyP = Lug mounted with Push TrolleyHG = Lug mounted with Hand Geared TrolleyMT = Lug mounted with Motorized TrolleyM = Lug mounted for use with Motorized TrolleyRH = Rigid Top Hook Link Chain Only

MAN GUARD ™ Electric Chain Hoists Ordering Information

*Set at factory for higher voltage unless specified

† not available in 2½ hp

BUDGIT®

4

Description Price

Reduce Control 24 Volt on 115 volt single phase add..... 121

CatalogNumber For Portable Electric Hoists Price

905441Do not use on hoist having fan-cooled motors.

78

Bullard Hook For:

Price Add

Upper Lower

BUDGIT Electric and Air Hoist

1/4 and 1/2 Ton...............................1 Ton...............................................2 Ton...............................................3 Ton*..............................................

167182264472

127141182472

*Normally Not Stocked

Model Std. LiftStd.

Speed

Motorhp1

phase

Motorhp3

phase

Hook/Lug Lug Mounted Hoists with Trolleys - Link Chain

Link Chain Push†† Hand Geared†† Motor DrivenNetWt. Price

NetWt. Price

NetWt. Price

NetWt. Price

¼ Ton CapacityBEHC2516-10*-†

1016 1/4** 1/4** 77 1860 94 2047 119 2590 162 4287

BEHC2532-10*-† 32 1/2 1/2 80 1957 97 2144 122 2687 165 4384BEHC2564-10*-† 64 1 1 77 2214 94 2401 119 2944 164 4641

½ Ton CapacityBEHC5016-10*-†

1016 1/2 1/2 80 2126 97 2313 122 2856 165 4553

BEHC5032-10*-† 32 1 1 81 2300 98 2487 123 3030 166 47271 Ton Capacity

BEHC0108-10*-†10

8 1/2 1/2 88 2235 105 2465 130 2965 173 4662BEHC0116-10*-† 16 1 1 89 2347 106 2577 131 3077 174 4774BEHC0132-10*-† 32 N/A 2 1/2 95 2738 112 2968 137 3468 182 5156

* Suspension Type **For 2 speed HP is .5/.16 IMPORTANT: See notes on page 5.† Voltage & Speed Contact customer service for Maximum liftsPolyethylene Chain containers are standard on all BEHC chain hoists 1/4-1 Ton for 28' lift or less, 2 Ton for 20' of lift or less and 3 Ton for 16' of lift or less except for spark resistant models which are not included. To price hoists with chain containers for lifts greater than the standard lifts mentioned, deduct $87 for 1/4 - 1 Ton, $141 for 2 Ton or $159 for 3 Ton from standard 10' list price, then add the appropriate fabric or metal chain container listed on page 10 or 11. On 1/4 to 1 Ton Hoists with lifts 18' or less, we will provide the #922440 chain container. Until January, 2009 a fabric chain container may be shipped in lieu of the Polyethylene at our discretion. Polyethylene Chain containers are designed to fit BEHC or newer models. For BEH models, a fabric or metal chain container must be used.

Suspension

Reduced Voltage

MAN GUARD ™ Electric Chain Hoists ¼ - 1 Ton Capacities

For Standard & Heavy-Duty Service

Hoist Options

Waterproof Covers

Bullard Hook Options

BUDGIT®

DescriptionPriceAdd

Rigid Top Hook (BEHC and 6000 Series BAHC)

1/4 Through 1 Ton.....................................................2 Ton..........................................................................3 Ton..........................................................................

2626126

CatalogNumber

Lug Suspension Bracketsfor use on Price

23456904**905422905424

¼ thru 1 ton capacity hoists.....................2 ton capacity hoists................................3 ton capacity hoists................................

217217349

Eye Bolt Suspension - 1/4 through 1 ton....................... 129

Rigid Mount To Hook Suspension Adapter, for Attachment of Hook Suspension Hoist to Rigid Mount Trolley

1 Ton, Catalog No. 32900901, 4-1/3" Headroom*2 Ton, Catalog No. 32901001, 4-3/4" Headroom*3 Ton, Catalog No. 32901101, 5-3/8" Headroom*Suspension Tool #23470601

26632034746

*Headroom measurement is from bottom of Beam to Saddle of Hook**Use Lug Suspension Bracket 23456902 ($217 list) for hoists between 12/1/06 and 1/7/08 and 905421 ($217 list) for hoists sold prior to 12/1/06.

5

Hoist Options

DescriptionCapacity

(tons)

PricePer ft.of Lift

Plated Link Chain

Load Chain

1/4 & 1/2 14.45 14.45

1 18.40 18.40

2 36.80 36.80

3 55.20 55.20

P.B. CordAll

5.08 5.08

Hand Chain 8.78 8.78

Power Cord All 5.08 5.08

ModelStd. Lift

Std. Speed

Motor hp1

phase

Motorhp3

phase

Hook/Lug Lug Mounted Hoist with Trolleys - Link Chain

Link Chain Push†† Hand Geared†† Motor Driven

Net Wt. Price Net Wt. Price Net Wt. Price Net Wt. Price

2 Ton Capacity

BEHC0204-10*-†

10

4 1/2 1/2 110 2741 158 3130 172 3599 207 5218

BEHC0208-10*-† 8 1 1 111 2882 159 3271 173 3740 209 5359

BEHC0216-10*-† 16 N/A 2 1/2 112 3241 158 3630 172 4099 210 5718

3 Ton Capacity

BEHC0305-10*-†10

5 1 1 136 3604 231 4140 248 4697 296 6636

BEHC0310-10*-† 10 N/A 2 1/2 146 3995 241 4531 258 5088 304 7027

MAN GUARD ™ Electric Chain Hoists 2 - 3 Ton Capacities

For Standard & Heavy-Duty ServiceStandard lifts are 10' 15' and 20' with pushbutton control cable lengths of 6', 11' and 16' respectively for Hook and Lug Mount Hoists with Push or Hand Geared Trolley. Power inlet cable is 5' long (MDT is 3' long). For hoists with Motor Driven Trolley, the Pushbutton control cable lengths are 7', 12', and 17' respectively.

Add-on Prices for special lifts (Add to 10 ft. lift price)

Note: Rigid lug hoist (LG), same price as Hook mount hoists (HK). Standard control voltage is 115 volts, 24 volts is optional, at no charge, except for single phase hoist (see page 4). Hoist & Trolley when ordered together will be shipped separate. * Suspension Type - † Voltage & Speed. Trolleys priced with hoists are for standard flange widths only. Wider widths are available at an additional price, (pick appropriate hoist - "hook/lug" and select trolley from pages 15 thru 19). See page 6 & 7 for motor driven trolley options. Load brake is not standard.

Standard Flange Widths

BUDGIT®

Polyethylene Chain containers are standard on all BEHC chain hoists 1/4-1 Ton for 28' lift or less, 2 Ton for 20' of lift or less and 3 Ton for 16' of lift or less except for spark resistant models which are not included. To price hoists with chain containers for lifts greater than the standard lifts mentioned, deduct $84 for 1/4 - 1 Ton, $136 for 2 Ton or $153 for 3 Ton from standard 10' list price, then add the appropriate fabric or metal chain container listed on page 10 or 11. On 1/4 to 1 Ton Hoists with lifts 18' or less, we will provide the #922440 chain container. Until January, 2009 a fabric chain container may be shipped in lieu of the Polyethylene at our discretion. Polyethylene Chain containers are designed to fit BEHC or newer models. For BEH models, a fabric or metal chain container must be used.

††Trolleys included do not have drop stops as an option. To price for drop stops, use lug mounted hoist price & add price of heavy duty rigid mount trolleys listed on page 18 & include drop stop adder.

Two speed hoists 3:1 3 phase only, Not available on 2 ton 4 fpmAdd to 1 speed base price for ¼ & ½ hp hoist...................................Add to 1 speed base price for 1 hp hoist...........................................Add to 1 speed base price for 2½ hp hoist........................................

406782985

Weatherproofing - Weatherproofing cord grips on electrical cables, sealing all electrical joints, zinc plated load chain (link chain).............. 77

Corrosion resistant featuresOptions include; zinc plated load chain and hooks - zinc plated or anodized lower blocks -sealing of motor shaft sealing and sealing of electrical compartments¼ & 1 Ton..............................................................................................2 & 3 Ton...............................................................................................

205251

Electronic upper & lower limit switch only (installed in hoist)............... 109

Dual Limit Switch (Electronic with Paddle Limit) 115v control only1 Speed - Add.......................................................................................2 Speed - Add.......................................................................................

712792

Lug Suspension Tool #23470601......................................................... 46

Push Button Deduct - 2 button pushbutton station only.................... -(36)

Load Brake (installed in hoist)............................................................. 164

Capacity(tons) Push

HandGeared Motorized

1/4 & 1/2 2-5/8" - 4-5/8"3" - 5" 3" - 5"

1 3" - 5"

23-3/8" - 6" 3-3/8" - 6"

3-5/8" - 6"

3 4" - 6-1/4"

6

Optional Speeds Optional Beam Flange Width Adjustment

Capacity(tons)

StandardNo Charge

Speeds(fpm)

Special Speeds

Capacity(tons)

StandardFlange

Adjustment(in)

Extended Adjustment — with price add to standard

(fpm) Price

1st ExtensionFlange

Adjustment(in) Price

2nd ExtensionFlange

Adjustment(in) Price

1/4 – 1 50, 75, 100 25, 150 60 1/4 – 1 3 – 5 5-1/8 – 7-1/4 86 7-1/2 – 9-1/8 111

2 40, 60, 80 30, 120 120 2 3-5/8 – 6 6-1/4 – 8-5/8 86 8-7/8 – 11-1/4 111

3 40, 50, 75, 100 25, 125 300 3 4 – 6-1/4 6-3/8 – 8-5/8 109 8-3/4 – 11 146

5 - 6 50, 80 25 300 5 - 6 4 – 6-1/4 6-3/8 – 8-5/8 109 8-3/4 – 11 146

7½ 50, 80 25 3000 7½ 4 – 6-1/4 6-3/8 – 8-5/8 109 8-3/4 – 11 146

CatalogNumber

NetWt.(lbs)

StandardFlange WidthAdjustment

(in)

MaximumFlange

Thickness(in)

Min.BeamDepth

(in)

Min.RadiusCurve H.P.

TrolleySpeed(fpm) Price

¼ to 1 - Ton Capacity

MDT01-* 85 3 – 5 15/16 6 3' 1/4 75 2427

2 - Ton Capacity

MDT02-* 95 3-5/8 – 6 1 6 5' 1/4 60 2477

3 - Ton Capacity

MDT03-* 140 4 – 6-1/4 1 6 5' 1/4 50 3032

5 - 6 - Ton Capacity

MDT06-* 190 4 – 6-1/4 1-1/8 8 6' 1/2 50 3406

7½ - Ton Capacity

MDT07-* 190 4 – 6-1/4 1-1/8 8 6' 1/2 50 3406

Electric Chain HoistsMotor Driven Trolleys

1-Speed Motor Driven Trolleys

For 1 or 2 Speed Hoists

Single Speed Trolley

Standard pendant drop is 7'-0", specify if longer length is required.Specify 1 or 2 speed hoist when ordering.Specify nonstandard requirements.

*Trolley Primary Voltage1 = 115/230 V (1-spd)2 = 230 V (2-spd)3 = 230/460 V (1-spd)4 = 460 V (2-spd)5 = 575 V (1-spd)6 = 575 V (2-spd)7 = 200/208 V (1-spd)8 = 200/208 V (2-spd)9 = 230 V (VFC)10 = 460 V (VFC)

Trolley Control Voltage

115 V - standard 24 V - no-charge Option on 3 phase units

BUDGIT®

Three Phase Only

7

Conductor Cord Trolleys

Electric Chain Hoist & TrolleyOptions & Accessories

Food Service OptionsStainless steel load chain and hooks available - Consult factory

*Price includes resetting of the clutch and relabeling. Capacities available are 1½ and 2½ ton and standard capacities listed in our literature. Consult factory for capacities not listed above.

Cord Reels

Special Hoist Options

P/N 234781-99 340º Pivot Base (Optional) - $107 .00 ListNote: Reel Ampacity is based on using reels with short-time rated crane & hoist motors

BUDGIT®

Retractile CordRetractile power cords keep power cable from dragging. Neoprene jacketed. Retracted length 4' - 0"; extended length 20' - 0".

Description Price

Food Grade Lubrication..................................................... Navastane 220 food grade

107

Clean Hoist, No Paint............................................................ 57

Yellow Epoxy Enamel Paint................................................... Lead free white available at no extra charge, for Hoist, Trolley and Chain Container

606

FDA Approved Epoxy Enamel Paint (white only) 1423

CatalogNumber Description

PriceEach

252Installed on same track as hoist................... 2-5/8" - 6" flange

30

CatalogNumber Description Price903999904000

3 Conductor #14AWG...................................4 Conductor #14AWG...................................

209290

Patented Track - 3¼" PriceNarrow flat tread steel wheels.Note: Trolley will not negotiate switches.Trolley Capacity: ¼ thru 7½ Ton, add................................ 366

Stainless Steel Wheels

Motorized Trolley Capacity ¼ thru 3 ton, add.................... 1047

Two Speed Trolleys

Available on all 3-phase models, all speeds, 3 to 1 speed ratio, add............................................................................ 380

Trolley Brake

Motor Mounted.................................................................. 464

Push Button Cable

For longer than standard 7' drop, add............................... 5.18/ft.

Power Supply Cable

For longer than standard 3' length, add............................ 5.18/ft.

Weatherproofing (trolley)

NEMA 4 — Watertight and dusttight enclosures for indoor and outdoor services, add..................................................NEMA 4X Stainless Steel, add...........................................

348590

Electronic Acceleration Control for Soft Start (230/460 3 phase only)

Single Speed.....................................................................Two Speed.........................................................................

400504

Drop Stops (safety lugs) and bumpers

Drop Stops (steel only)......................................................Drop Stops with Rubber Bumpers.....................................

290582

Mounting Hoist to Motor Driven Trolley.............................. 278

CatalogNumber

No ofCollector

RingsNo. & Sizeof Wires

Length(ft)

AMPRating @ 600 VAC

Std.GuideRollers

Std.PivotBase

Crane & Hoist Motors

NetWt.(lbs)

ListPrice

115-1-60Max hpRating



440-2 or3-60 Maxhp Rating

234781-22 4 4 - #16 20' 8 yes no 1/2 1 3 5 33.5 841234781-23 4 4 - #16 30' 8 yes no 1/2 1 3 5 35 853234781-25 4 4 - #16 50' 8 yes no 1/2 1 3 5 38 896234781-42 4 4 - #14 20' 12 yes no 1 1/2 3 5 10 34.9 847234781-43 4 4 - #14 30' 12 yes no 1 1/2 3 5 10 37.1 872234781-45 4 4 - #14 45' 12 yes no 1 1/2 3 5 10 41.5 929

Description PriceZinc Plated Upper or Lower Hook¼ - 1 Ton..............................................................................2 & 3 Ton..............................................................................

62110

Derating of Hoist Capacity*.................................................. 222

Stainless Steel I.D. Tags...................................................... 129

Mag Particle (per hook)........................................................ 230

Explosion Proof or Spark Resistant Applications................Contact Factory

Push Button Stations (trolley) PriceTwo extra single speed buttons, add.........................................Two extra two speed buttons, add.............................................Stop-start buttons, add..............................................................Stop-start buttons - maintained, add........................................To delete 4-button push button station and cable assembly, deduct........................................................................................

40554055

-(40)

Fuse Panel

A fuse panel with both hoist and trolley power circuit fuses for overcurrent protection................................................................ 293

Mainline Disconnect Panel

A mainline contactor panel for applications requiring disconnect to be mounted on trolley. Controlled by STOP-START buttons included in push button station. Panel includes hoist and trolley fusing, add........................................ 671

Electrical Adapter Kits

The following field conversion electrical adaptor kits are required when it is desired to modify existing lug mount push button hoists to lug mount for motor driven trolleys.

Catalog Electrical Power Price

901821901823

115/230 volt, 1 phase, 60 Hertz AC........................All voltages, 3 phase, 60 Hertz AC S.S, 2 speed....

5669

8

Electric Chain Hoist & Trolley Options & Accessories

*For ¼ and ½ ton units, use 1 ton Rigid Mount Trolleys when mounting enclosures on trolleys.

Electrical Options

BUDGIT®

Thermal Overload Relays, 3 Phase Power Price

Single Speed Hoist Only - Hoist Mounted,...............................................................................................Rigid Mount Trolley*, Single or Two Speed Hoist - Mounted on Manual Trolley .....................................Motorized Hoist and Trolley - Mounted on Trolley ...................................................................................

322322423

Branch Circuit Motor Fusing, Trolley Mounted

Hoist only on Rigid Mount Trolley*...........................................................................................................Hoist and Motorized Trolley......................................................................................................................

289293

Mainline Disconnect

Hoist Mounted, Single Speed Only (Includes, Start-Stop Buttons)..........................................................Manual Trolley Mounted on Rigid Mount* (Trolley Includes Hoist Fusing & Start-Stop Buttons).............Motorized Trolley Mounted (Includes Hoist & Trolley Fusing & Start-Stop Buttons)................................

544671671

Special Pushbutton Stations (factory installed) Apply to Factory

Three Position Selector Switch

Two Hoists Only........................................................................................................................................Two Hoists & Motorized Trolleys...............................................................................................................

Apply to Factory

50 Hertz Power Supply, Hoist and Motorized Trolley, Add Per Motor (single speed only)

115/230 Volts, Single Phase Power (Hoists Only) 117001-54.................................................................115/230 Volts, Single Phase Power (Trolley)............................................................................................

Apply to Factory

Three Phase Power

190/380 Volts (50 Hz)..............................................................................................................................200/400 Volts (50 Hz)..............................................................................................................................207/415 Volts (50 Hz)..............................................................................................................................220/440 Volts (50 Hz)..............................................................................................................................230/460 Volts (50 Hz)..............................................................................................................................240/480 Volts (50 Hz)..............................................................................................................................Two Speed (all power supplies)................................................................................................................

No chargeP.O.A.P.O.A.P.O.A.P.O.A.P.O.A.P.O.A.

9

Electric Chain Hoist & Trolleys Options & Accessories

* Add to single speed hoist and/or trolley list price.

Note: Model BEHC hoists must have load brake option for VFD control.

Under the Cover Variable Frequency DrivesFor Electric Chain Hoist and Motor Driven Trolleys

Standard Features Speed range of 10:1

2 - step infinitely variable as standard

Thermal overload protection

Fault recorder

CURRENT COLLECTOR ARRANGEMENT

When slide-type current collectors for insulated conductors are to be used to supply power to the trolley, the following collector components may be ordered with the trolley at extra cost.

Determine number of collectors required and location of conductors, whether one side of beam or both sides of beam. Collector poles and brackets shown below indicate beam sizes with conductor support on top of beam. If beams are larger, the conductor support must be welded into web of beam. Pressed steel trolleys require a collector mounting plate.

Note: Not available in 575 volt.*Not CSA Approved

BUDGIT®

Add Option - 3 step buttons (hoist or trolley) $178

Catalog Number Price

901590Collector Pole and Bracket..................................Suitable for a maximum of 6 collectors.Adjustable for beam depth sizes 8" thru 12"

62

For collector mounting plate, pressed steel wheels trolleys

901584901585

Trolleys with bumpers...........................................Trolleys without bumpers.....................................

4141

Electric Hoists

Max Horsepower 3 Phase Power Supply List Add Price*

¼ - ½ 230/460 P.O.A.

1 230/460 P.O.A.

2½ 230/460 P.O.A.

Motor Driven Trolleys

½ 230 1232

½ 460 1232

10

Note: Polyethylene chain containers are standard on all BEHC models with standard lifts as noted on page 4 & 5 except for spark resistent or chain models which is not included.

For containers having greater capacities, see page 11.Catalog Numbers 905494 thru 905497 Chain Containers are Low Headroom design and are supported from trolley suspension pins. To use these containers, Hoist must be in Lug Suspension, Cross Mounted.

Electric Chain HoistsOptions & Accessories

Hoist Load Point ControlAn ergonomically designed handle located on the bottom block permits the hoist operating hand to position, load and operate the hoist, leaving the other hand free to position the load. Hoist point control will be shipped loose unless specified on order.

Metal Chain Containers - For BUDGIT Electric Hoists

Catalog Number 905435

For Link Chain

For fabric containers see page 12

BUDGIT®

Catalog Number

Hoist LoadRating(tons)

Hoist RatedLift(ft)

ShippingWt.(lbs) Price

901931

1/8

10

14

997

901932 15 1043

901933 20 1082

901934

1/4

10 997

901935 15 1043

901936 20 1082

901937

1/2

10 997

901938 15 1043

901939 20 1082

CatalogNumber

Type Hoist Chain

NetWt.

Maximum Lift in Feet

Dimension

Price

Hoist Cap.1/4 - 1/2

TonHoist Cap.

1 TonHoist Cap.

2 TonHoist Cap.

3 Ton R S

905434

Link

4 15 15 do not use do not use

4-1/2

10 108

905435 8 30 30 15 10 15 111

905436 10 45 45 22 15 19 167

905437 14 60 60 30 20 23 189

905438 15 75 75 37 25 28 305

905439 16 90 90 45 30 33 342

905494

Link

16

do not use do not use do not use

20

10-1/4

15 519

905495 20 30 19 548

905496 28 40 23 576

905497 30 50 28 582

11

* ¼ - 1 ton insert number 6 2 ton insert number 7 3 ton insert number 8

Link chain hoists using these long lift containers must be lug suspended, cross mounted.Chain containers are supported from the trolley suspension pins.Chain containers are low headroom design, 10½ inches wide.S Dimension = bottom of hoist to bottom of chain container.

Electric Chain Hoists Options & Accessories

Metal Long Lift Link Chain Containers

BUDGIT®

Cloth Chain Containers (BEHC or BEH)

Note: Polyethylene chain containers are standard on all BEHC models with standard lifts as noted on page 4 & 5 except for spark resistent or chain models which is not included.

S Dimension = bottom of hoist to bottom of chain container.

Link Chain

Standard Chain Container Catalog Number

Chain Container

Depth(S Dim.)

Maximum Lift in feet

ListPrice¼ & ½ Ton 1 Ton 2 Ton 3 Ton

439425-*1 15 65 60 30 20 519

439425-*2 19 100 90 45 30 548

439425-*3 23 130 120 60 40 576

439425-*4 27 165 150 75 50 607

439425-*5 31 200 180 90 60 645

439425-*6 35 230 210 105 70 675

Cloth Chain Containers

Standard Chain Container Catalog Number

Chain Container

Depth(S Dim.)

Maximum Lift in feet

ListPrice¼ & ½ Ton 1 Ton 2 Ton 3 Ton

805435 17 30 30 15 10 132

805436 19 45 45 22 15 174

805437 25 60 60 30 20 226

Polyethylene Chain Containers

CatalogNumber

ChainContainer Depth

Maximum Lift in ft. ListPrice1 ton 2 ton 3 ton

922440922441922442922443

10-3/1612-5/1615-13/1620-1/16

18284050

9142025

691316

8787141159


12

Shophoist Electric Chain Hoists250 - 1000 lbs

Top Hook onlyFor lifts other than standard 10 ft. (add extra charges)Extra push button cord (standard drop 4 ft. shorter than lift) $5.68/ft.Extra power cord (standard length 6 ft.) $5.68/ft.Extra chain per ft. lift: $10.14 - 250/300/500 lbs., $20.28 - 600/1000 lbs.*Contactor in pendant station

Prices are FOB Damascus, Virginia

ShopHoist

BUDGIT®

250 lb. CapacityCatalogNumber

StandardLift Speed Voltage

Parts ofChain

NetWeight Price

931769

10

16

115-1-60

1 28

1260931770 115-1-60* 1126931771 230-3-60 1260931772 460-3-60 1260931774

24230-3-60 1290

931775 460-3-60 1290931777

40230-3-60 1321

931778 460-3-60 1321

300 lb. Capacity931780

10

16

115-1-60

1 28

1260931781 115-1-60* 1126931783 230-3-60 1260931784 460-3-60 1260931786

24230-3-60 1290

931787 460-3-60 1290931806

40230-3-60 1321

931807 460-3-60 1321


10

12

115-1-60

1

26 1517931838 115-1-60*

281380

931839 230-3-60 1517931840 460-3-60 1517931842

8

115-1-60

2

32 1454931843 115-1-60*

34

1322931844 230-3-60 1454931845 460-3-60 1454931847

20230-3-60 1513

931848 460-3-60 1513931862

24230-3-60

1 281576

931863 460-3-60 1576


10

8

115-1-60

2

34 1454931791 115-1-60* 32 1322931793 230-3-60

34

1454931794 460-3-60 1454931796

12230-3-60 1484

931797 460-3-60 1484931880

20230-3-60 1513

931881 460-3-60 1513


10

6

115-1-60

2

34 1649931866 115-1-60* 32 1577931867 230-3-60

341649

931868 460-3-60 1649931870

8230-3-60

32

1662931871 460-3-60 1662931873

12230-3-60 1678

931874 460-3-60 1678

13

ShopHoist Chain Container*

ShopHoist Bulk Load Chain*

* Prices are FOB Damascus, Virginia

Shophoist Electric Chain HoistsAccessoriesBUDGIT®

Beam Clamps

Note: Beam clamps are shipped FOB, Wadesboro, NC.

modelmodel

number cap.part

numberuserprice

allowableflange width net

wt.(lbs)min. max.

BCYFBeam

Clamps

BCYF-1 1 840-05000 78 3.00 9.00 8.40

BCYF-2 2 840-07000 87 3.00 9.00 10.60

BCYF-3 3 840-09000 134 4.00 9.00 20.20

BCYF-5 5 840-13000 168 4.00 10.25 24.20

BCYF-10 10 840-17000 268 3.50 12.50 34.10

CatalogNumber

NetWeight

Hoist Cap.250/300/500

lbs.Hoist Cap.

600/1000 lbs. Price

2063 4 10 5 48

2064

5

20 10 54

2065 40 20 63

2066 80 40 69

2067 6 120 60 118

Hoist Catalog Number & Capacity Description

Feet of Chain in Package

NetWeight

CatalogNumber Price

250, 300, 500, 600 & 1000 lb.

Shop Hoist

.157 BarDiameter

250 66 85018 2537.50

500 126 85019 5075.00

1000 244 85020 10150.00

14

I-Beam Trolleys

Push Type & Hand Geared Trolleys

Hook Suspension TrolleysCapacities 550 to 11000 PoundsCapacities ¼ thru 5-tonTrolleys are Metric rated

*Spark and corrosion resistant models - Equipped with bronze wheels and vinyl covered bumpers. The hand chain is Aluminum alloy, anti-tilt roller is bronze and wheel gears are aluminum bronze.

**When used on smallest I-Beam Size, beam must be free of obstructions such as clips, suspension bolts and nuts.

Push-Type Patented Track TrolleysCapacities ¼ thru 2 Tons

Trolley Adapter Links - For use with Hook Suspension Trolleys

BUDGIT®

Hook Suspension TrolleysCapacities 550 to 6000 PoundsFor hook-type hoists¼ thru 2-ton capacity trolleys are Metric rated3-ton capacity trolleys are not metric rated


281282283

For ¼ & ½ Ton Trolleys.......................................For 1 Ton Trolleys...............................................For 1½, 2 & 3 Ton Trolleys..................................

404042

Spark & Corrosion Resistant Models*

CatalogNumber

Capacity(tons)

NetWt

(lbs)

Adjustable to Fit These Beam Sizes (inches)

Price**

Min DepthMin Flange

WidthMax Flange

Width80SR 1/4 13 4 2-5/8 4-5/8 1660

80WFASR 1/4 14 4 5 7 172181SR 1/2 13 4 2-5/8 4-5/8 1660

81WFASR 1/2 14 4 5 7 172182SR 1 25 5 3 5 1843

82WFASR 1 27 5 5 7 189782WFBSR 1 28 5 7 9 1933

79SR 1-1/2 36 6 3-3/8 6 214879WFASR 1-1/2 39 6 6 8 223379WFBSR 1-1/2 40 6 8 10 2281

83SR 2 36 6 3-3/8 6 214883WFASR 2 39 6 6 8 223383WFBSR 2 40 6 8 10 2281

Standard Flange I-Beam

Catalog*Number

Capacity(tons)

Std. Beam Height

(in)

I-BeamWidth

(in)

Min. Radius Curve

(in)

Wheel TreadDiameter

(in)Net Wt.

(lbs) Price

CBTP-0025 ¼ 4-24 2.0 - 8.7 27 2.36 19 148

CBTP-0050 ½ 4-24 2.0 - 8.7 27 2.36 19 148

CBTP-0100 1 5-24 2.3 - 8.7 36 2.36 26 178

CBTP-0150 1½ 6-24 2.3 - 8.7 45 3.15 46 290

CBTP-0200 2 6-24 2.3 - 8.7 45 3.15 46 290

CBTP-0300 3 8-24 3.0 - 8.7 55 4.41 86 503

CBTP-0500 5 10-24 3.5 - 8.7 70 4.92 130 699

I-Beam TrolleyFor Hook-Type Hoists

Capacity(tons)

Catalog Number

Wheel Diameter

(in) Price

1 900382 4 518

2 900383 5 680

15

Push Type & Hand Geared Trol-leys

Hand Geared I-Beam Trolleys

Hook Suspension TrolleysCapacities 2200 to 11000 PoundsFor hook-type hoists - 1 thru 5-ton capacity trolleys are Metric rated

For longer than standard 9'-6" hand chain drop, add:

Standard Models ............................................................... per ft. $8.83 Spark & Corrosion Resistant Models Aluminum Chain ... per ft. $20.05

** When used on smallest I-beam size, beam must be free of obstructions such as clips, suspension bolts and nuts.

*Spark and corrosion resistant models - Equipped with bronze wheels and vinyl covered bumpers. The hand chain is Aluminum alloy, anti-tilt roller is bronze, and wheel gears are aluminum bronze.

Load Lifter Trolley SERIES 633 (Bulletin #LT/BC-C5007-0202)*

*Prices are FOB Wadesboro, NC

BUDGIT®

Hook Suspension TrolleysCapacities 2200 to 6000 PoundsFor hook-type hoists - 1 thru 2-ton capacity trolleys are Metric rated

Hand Chain Drop ............................................................... per ft. $9.51Standard Hand Chain Drop = 15'

Geared Trolley

Catalog*Number

Capacity(tons)

Std. Beam Height

(in)

I-BeamWidth

(in)

Min. Radius Curve

(in)

Wheel TreadDiameter

(in)Net Wt.

(lbs) Price

CBTG-0100 1 5-24 2.3 - 8.7 36 2.36 26 606

CBTG-0150 1½ 6-24 2.3 - 8.7 45 3.15 46 807

CBTG-0200 2 6-24 2.3 - 8.7 45 3.15 46 807

CBTG-0300 3 8-24 3.0 - 8.7 55 4.41 86 1097

CBTG-0500 5 10-24 3.5 - 8.7 70 4.92 130 1538

Spark & Corrosion Resistant Models *

CatalogNumber

Capacity(tons)

Net Wt.(lbs)

Adjust to Fit These Beam Sizes

Price** Min Beam

DepthMin Flange

WidthMax Flange

Width

82GSR 1 41 6 3 5 2813

82GWFASR 1 43 6 5 7 2984

82GWFBSR 1 44 6 7 9 3000

79GSR 1-1/2 52 7 3-3/8 6 3194

79GWFASR 1-1/2 54 7 6 8 3295

79GWFBSR 1-1/2 55 7 8 10 3343

83GSR 2 52 7 3-3/8 6 3194

83GWFASR 2 54 7 6 8 3295

83GWFBSR 2 55 7 8 10 3343

CatalogNumber

Capacity(tons)

Weight(lbs)

Adjustable to Fit Standard S-Beams

PriceDepth

(in)

Flange Width

Min.(in)

Max.(in)

922085 1/2 18 3-15 2 - 1/2 5 - 5/8 155

922086 1 34 5-24 3

8

183

922087 2 54 6-24 3 - 5/8 305

922088 3 100 8-24 4 518

922089 5 168 10-24 4 - 5/8 783

16

Push Type & Hand Geared Trol-leys

Push-Type ModelsCapacities 500 to 6000 Pounds

‡ Equipped with anti-tip roller for use with the Series USA lug mount hoist.* Equipped with bumpers

Hand-GearedCapacities 2000, 4000 & 6000 Pounds

* Equipped with bumpers. Hand Chain Drop is 9'-6"

** For flange widths not shown, apply to factory. Smallest radius curves that these trolleys will negotiate are same as push-type trolleys. Spark and corrosion models — Equipped with bronze wheels and vinyl covered bumpers.

For longer than standard 9'-6" hand chain drop, add $8.83 per foot, spark and corrosion resistant models, add $20.05 per foot for aluminum hand chain.

Note: Drop stops are not available on these models.

Electric, Manual and Air Hoist Lug Mounted Trolleys

Prices apply to standard flange adjustments. Apply for prices on other than Standard.*Prices are FOB Damascus, Virginia

Close Radius Series 632 Plain Ball Bearing Trolley (Hook Mounted)*

* Bumpers included‡ Equipped with anti-tip roller for use with the Series USA lug mount hoist.

BUDGIT®

Push-Type Patented Track TrolleysCapacities ¼ thru 2 Tons

Trolleys for Standard Flange I-Beams

CatalogNumber

Capacity(tons)

Net Wt.(lbs)

Adj. to Fit These Beam Sizes**

Price

Min. BeamDepth

(in)

FlangeWidth

(in)

905401*504555-5

‡*504554-15905402

*504554-13‡ 905409* 905403* 905404

¼ & ½¼ & ½

111123

1516242324244375

44555566

2-5/8 - 4-5/82-5/8 - 4-5/8

3 - 53 - 53 - 53 - 5

3-3/8 - 63-3/8 - 6

187264357230308281389536

Spark Resistant Models (For Manual Hoists)

905461905462

905462W1‡ 905465* 905463

½1

3/8, ½, & ¾12

1523242445

45556

2-5/8 - 4-5/83 - 5

5-1/4 - 7-3/83 - 5

3-3/8 - 6

17451886198619872192

Spark Resistant Models (For Air Hoists)

905461905462905463

3/8

½ & ¾1

152345

456

2-5/8 - 4-5/83 - 5

3-3/8 - 6

174518862192

Trolleys for Wider Flange I-Beams

905405*505322-6905405W1‡ 905410* 905406* 905407* 905408

1111233

24252625445278

5555666

5-1/4 - 7-3/85-1/4 - 7-3/8

7-1/2 - 95-1/4 - 7-3/86-1/4 - 8-7/86-1/8 - 8-7/8

9 - 11

314354409381448713771

Trolleys for Standard Flange I-Beams

CatalogNumber

Capacity(tons)

Net Wt.(lbs)

Adj. to Fit TheseBeam Sizes**

Price

Min. BeamDepth

(in)

FlangeWidth

(in)

*905411 1 40 6 3 – 5 730

*905412 2 57 7 3-3/8 – 6 858

*905417 3 92 7 3-3/8 – 6 1093

Spark Resistant Models (For Air Hoists)

*905471 1/2 & 3/41

40 6 3 – 5 2945

*905472 57 7 3-3/8 – 6 3223

Trolleys for Wider Flange I-Beams

*905413 1 41 5 5-1/4 – 7-3/8 832

*905414 2 58 6 6-1/4 – 8-7/8 947

*905418 3 100 6 6-1/8 – 8-7/8 1174

*905419 3 102 6 9 – 11 1218

CatalogNumber

MaximumCapacity

(tons)

Approx.Shipping

Wt.(lbs)

StandardBeam Height

(in)

StandardFlange Width

(in)

MinimumRadius Curve

(in) Price

B3222 1/4 & 1/2 104 - 12 2-5/8 - 5-1/16 7

158

B3224 1 12 193

B3226 1-1/2 & 2 25 6 - 15 3-3/8 - 5-5/810

316

B3230 3 33 8 - 18 4 - 6-1/4 555

I-Beam TrolleyFor Lug Mounted Hoists

*1 900385 4 547

‡ 1 900387 4 563

2 900386 5 580

17

For longer than standard 9'-6" hand chain drop, add $8.83 per ft, spark and corrosion resistant models add $20.05 per ft for aluminum hand chain.¥ For use on "6000" series only.

For drop stops add: Steel only ......................... $290 With rubber bumpers ........ 582

Heavy Duty Rigid Mount Trolleys

Wider Flange Beams - Add Prices Apply to Push or Hand Geared, Standard or Spark Resistant

Patented Track (price for complete trol-ley)

Push Type & Hand Geared Trolleys

Note: For 7½ ton consult factory.

BUDGIT®

Push Type TrolleysTrolleys for Standard Flange I-Beams

Hand Geared TrolleysTrolleys for Standard Flange I-Beams

CatalogNumber

Capacity(tons)

Net Wt.(lbs)

Adjust to Fit TheseBeam Sizes

PriceCatalogNumber

Capacity(tons)

Net Wt.(lbs)

Adjust to Fit TheseBeam Sizes

Price

Minimum Beam Depth

(in)

FlangeWidth

(in)

Minimum Beam Depth

(in)

FlangeWidth

(in)

900211900221900231900241PUT07

12

3 & 45 & 67½

405085150150

66688

3 – 53-5/8 – 64 – 6-1/44 – 6-1/44 – 6-1/4

48654180111061106

900261900271900281900291HGT07

12

3 & 45 & 67½

5565100165165

66688

3 – 53-5/8 – 64 – 6-1/44 – 6-1/44 – 6-1/4

912997134818771877

Spark Resistant Models (For Manual Hoists) Spark Resistant Models (For Manual Hoists)

900216900226900236900246

12

3 & 45 & 6

405085150

6668

3 – 53-5/8 – 64 – 6-1/44 – 6-1/4

1304144418392585

900266900276900286900296

12

3 & 45 & 6

5565100165

6668

3 – 53-5/8 – 64 – 6-1/44 – 6-1/4

1891197024263415

Spark Resistant Models (For Air Hoists) Spark Resistant Models (For Air Hoists)

¥ 900216¥ 900226 900236

1/2-3/412

405085

666

3 – 53-5/8 – 6-1/4

4 – 6

130414441839

¥ 900266¥ 900276 900286

1/2-3/412

5565100

666

3 – 53-5/8 – 6-1/4

4 – 6

189119702426

TrolleyCapacity

(tons)

FlangeRange

Std.

Extended Flange Range

1st ExtensionFlange Range

PriceAdd

2nd ExtensionFlange Range

PriceAdd

12

3, 45, 6

7-1/2

3 – 53-5/8 – 64 – 6-1/44 – 6-1/44 – 6-1/4

5-1/8 – 7-1/46-1/4 – 8-5/86-3/8 – 8-5/86-3/8 – 8-5/86-3/8 – 8-5/8

9090114114114

7-1/2 – 9-1/88-7/8 – 11-1/4

8-3/4 – 118-3/4 – 118-3/4 – 11

129129161161161

Capacity(tons)

Push Type Hand Geared

Standard Spark Resistant Standard Spark Resistant

Catalog Price Catalog Price Catalog Price Catalog Price

12

3, 45, 6

900215900225900235900245

69476310381504

900220900230900240900250

1418148318772541

900265900275900285900295

1137123616082162

900270900280900290900300

1905200524593220

18

Cast Iron Wheel Trolleys

For beam flange widths larger than listed, apply to factory.

*For Spark Resistant models, add SR at the end of the catalog number.Model P trolleys for wide flange beam adaptation, or beams larger than standard add 25% of trolley price, see maximum flange widths listed below.Additional hand chain, add $8.30 per foot of drop for standard models and add $10.10 per foot of drop for spark resistant models. Not metric rated.

**1/4 - 12 ton units are supplied straight sided plates with universal wheels for operation on flat or tapered beams. 16 - 25 ton units are supplied with canted side plates for operation on Standard American tapered I-beams. For other beams or patented track applications, consult factory.

Push and Hand-Geared TypeCapacities ¼ to 25 Tons

Prices are FOB Lisbon, Ohio

BUDGIT®

Model P Push Type

Catalog*Number

Capacity(tons)

Net Wt.(lbs)

Beam Adjustment

Range**

SmallestRadius Curve

(in) Price

SparkResistant

Price

1641-0025 ¼ 23 23/4" - 5" 20 356 756

1641-0050 ½ 23 23/4" - 5" 20 356 756

1641-0100 1 43 3" - 6" 24 404 756

1641-0150 1½ 45 3" - 6" 24 456 1125

1641-0200 2 67 33/8" - 61/4 30 498 1125

1641-0300 3 70 33/8" - 61/4 30 657 1767

1641-0400 4 155 4" - 7" 36 792 2060

1641-0500 5 160 4" - 7" 36 1075 2084

1641-0600 6 160 4" - 7" 36 1075 2084

1641-0800 8 300 45/8" - 8" 60 1672 3525

1641-1000 10 310 45/8" - 8" 60 2139 4620

1641-1200 12 310 45/8" - 8" 60 2139 4727

1641-1600 16 800 6" - 8" 96 4160 9349

1641-2000 20 845 6" - 8" 96 4557 9835

1631-2500 25 1045 6" - 8" 120 5047 10291

Model P Hand-Geared Type

Catalog*Number

Capacity(tons)

Net Wt.(lbs)

Beam Adjustment

Range**

HandChain Drop

(ft) Price

SparkResistant

Price

1642-0100 1 62 3" - 6"

8

686 1328

1642-0150 1½ 65 3" - 6" 743 1446

1642-0200 2 90 33/8" - 61/4 796 1548

1642-0300 3 93 33/8" - 61/4 1052 1934

1642-0400 4 184 4" - 7" 1175 2421

1642-0500 5 188 4" - 7" 1517 2617

1642-0600 6 188 4" - 7" 1517 2617

1642-0800 8 347 45/8" - 8" 2149 3880

1642-1000 10 360 45/8" - 8" 3001 5495

1642-1200 12 360 45/8" - 8" 3001 5528

1642-1600 16 895 6" - 8" 5262 11718

1642-2000 20 955 6" - 8" 5959 12867

1632-2500 25 1200 6" - 8" 6717 13274

Maximum Acceptable Flange Widths of Wide Flange Beams

Capacity(tons)

Flange Width(in)

1/4, 1/2, & 11-1/2 & 2

3 & 45, 6, 8, 10 & 12

66 - 5/87 - 1/48 - 1/4

19

Standard Beam Sizes

Standard Beam SizesThese charts show common standard beam sizes, weights and nominal flange widths for both American Standard Section "S" Shapes and Wide Flange Shapes (as listed by American Institute of Steel Construction). Wide Flange Shapes are W Shapes effective approximately September 1, 1978.

Always include beam sizes when ordering BUDGIT Trolleys and Trolley Hoists.

BUDGIT®

American StandardSections ("S" Beams) Wide Flange Sections ("W" Beams)

Designation(in & lbs)

Flange Width

(in)Designation

(in & lbs)

Flange Width

(in)Designation

(in & lbs)

Flange Width

(in)Designation

(in & lbs)

Flange Width

(in)

S4 X 7.7 2 5/8 W6 X 94

W12 X 14

4

W18 X 35

6S4 X 9.5 2 3/4 W6 X 12 W12 X 16 W18 X 40

S5 X 10 3 W6 X 15 6 W12 X 19 W18 X 46

S5 X 14.75 3 1/4 W6 X 16 4 W12 X 22 W18 X 50

7 1/2S6 X 12.5 3 3/8 W6 X 20

6W12 X 26

6 1/2

W18 X 55

S6 X 17.25 3 9/16 W6 X 25 W12 X 30 W18 X 60

S7 X 15.3 3 5/8 W8 X 10

4

W12 X 35 W18 X 65

S7 X 20 3 7/8 W8 X 13 W12 X 40

8

W18 X 71 7 5/8

S8 X 18.4 4 W8 X 15 W12 X 45 W18 X 7611

S8 X 23 4 1/8 W8 X 185 1/4

W12 X 50 W18 X 86

S10 X 25.4 4 5/8 W8 X 21 W12 X 5310

W18 X 97 11 1/8

S10 X 355

W8 X 246 1/2

W12 X 58 W18 X 10611 1/4

S 12 X 31.8 W8 X 28 W14 X 225

W18 X 119

S12 X 35 5 1/8 W8 X 31

8

W14 X 26 W21 X 44

6 1/2S12 X 40.8 5 1/4 W8 X 35 W14 X 30

6 3/4

W21 X 50

S12 X 505 1/2

W8 X 40 W14 X 34 W21 X 57

S15 X 42.9 W8 X 48 8 1/8 W14 X 38 W21 X 62

8 1/4S15 X 50 5 5/8 W8 X 58

8 1/4W14 X 43

8

W21 X 68

S18 X 54.7 6 W8 X 67 W14 X 48 W21 X 73

S18 X 706 1/4

W10 X 12

4

W14 X 53 W21 X 83

S20 X 66 W10 X 15 W14 X 61

10

W24 X 557

S20 X 75 6 3/8 W10 X 17 W14 X 68 W24 X 62

S20 X 85 7 W10 X 19 W14 X 74 W24 X 68

9S20 X 95 7 1/4 W10 X 22

5 3/4W14 X 82 10 1/8 W24 X 76

S24 X 80 7 W10 X 26 W16 X 265 1/2

W24 X 84

S24 X 90 7 1/8 W10 X 30 5 7/8 W16 X 31 W24 X 94

S24 X 100 7 1/4 W10 X 33

8

W16 X 36

7

W27 X 84

10S24 X 106 7 7/8 W10 X 39 W16 X 40 W27 X 94

S24 X 120 8 W10 X 45 W16 X 45 W27 X 102

W10 X 5410

W16 X 50 W27 X 114

W10 X 60 W16 X 57 7 1/8 W30 X 108

10 1/2W10 X 68 10 1/8 W16 X 67

10 1/4W30 X 116

W10 X 7710 1/4

W16 X 77 W30 X 124

W10 X 88 W16 X 89 10 3/8 W30 X 132

W10 X 100 10 3/8 W16 X 100 10 3/4 — —

W10 X 112 10 1/2 — — — —

20

*Prices are FOB Damascus, Virginiaquantity discounts apply

600 Series Air HoistCapacities up to 600 lbs.*Pendant Throttle ControlHook Suspension Only

Top Hook Onlyfor lifts other than standard 10 ft. (add extra charges)Extra pendant hose (standard 6 ft.) $6/ft.Extra chain per ft. of lift $10.15 250/300 lbs. - $20.30 500/600 lbs.Maximum pendant drop is 36 ft.

600 Series Chain Container*

600 Series Bulk Load Chain*

600 Series Air HoistBUDGIT®

Air Wire Rope Manipulator *

* Prices are FOB Wadesboro, North Carolina

Hose Reels - See Crane Source Catalog

Capacity(lbs.)

CatalogNumber

NetWeight(lbs.)

Full LoadHoist Speed

(fpm)

Full LoadLowering Speed

(fpm)Parts of

Load Chain Price

250 931889

3031 83

1

1689

300 931890 1689

500 931892 21 55 1824

500 931894

3416 42

2

1878

600 931895 1878

1000 931897 11 29 2016

Catalog Number

NetWeight

Hoist Capacity250 & 300 lbs.

Hoist Capacity500, 600 & 1000 lbs. Price

2063 4 10 5 48

2064

5

20 10 54

2065 40 20 63

2066 80 40 69

2067 6 120 60 118

Capacitylbs. Description

Feet of Chainin Package

NetWeight

CatalogNumber Price

250, 300,500, 600& 1000

.157 BarDiameter

250 66 85018 2537.50

500 126 85019 5075.00

1000 244 85020 10150.00

ModelNumber

RatedProduct

Code

StandardCapacity

(lbs)

LiftingLift(ft)

AirSpeed(fpm)

Top HookConsump.

(cfm)

ShippingA

Dim.Weight

(lbs)UserPrice

TMM-140 17050 300 6.5 36 21.2 22¾ 20 2226

21

2200 Series Air Chain Hoists

Recommended options: Filter & Lubricator Regulator (if line pressure is over 110 PSI) Chain Container

If any 2200 series air hoist is ordered other than the standard above, the following model numbers will appear on the hoist and box.

2200 Series Air Hoist

Catalog Number Modifications

BAHC 2565 BAHC 25 65 Budgit Capacity Speeds (Lifting)

Air 25 = 1/4 ton (fpm)

Hoist 50 = 1/2 ton 65

01 = 1 ton 45

38 = 3/8 ton (SR) 23

75 = 3/4 ton (SR) 60

29

BUDGIT®

The following list of 2200 series catalog numbers are Budgit standard models, all with 10' lifts only.

2204 2216 2255 2251

2211 2219 2256

2212 2220 2259

2215 2243 2260

22

2200 Series Air Chain Hoists¼ - 1 Ton Capacities

Capacities 500 to 2000 PoundsPull Cord Control

* Price add-on for additional lift includes pull cords.

**Speeds based on 90 psi line pressure and with full rated hoist load. Hoist speeds are adjustable and can be reduced to 50% of full rated speed. Shipped from factory with hoisting speed set at maximum rated speed, lowering speed set at reduced speed.

Capacities 500 to 2000 PoundsPendant Throttle Control

Equipped with 6' pendant control hose assembly.Maximum pendant drop is 72 ft.

Add-on Prices For Other Than 10 Feet Lifts* Note: 10' lifts are standard, longer lifts available. Equipped with 6' pendant control hose. Speeds based on 90 psi line pressure with full rated hoist load. Rated air supply is 48 cfm (full load – full speed). Always install a filter and lubricator in air line for each hoist.

Add-on Prices for Other Than Standard 10' LiftsTo compute total price of hoist with other than standard 10' lift, add to the price of desired 10' lift hoist the additional charges as instructed below:

1. If control hose is to be lengthened, add the charge for each additional foot of hose over 6 feet.

2. If load chain is to be lengthened add the charge for each additional foot of lift over 10 feet.

Series 2200 Air Chain Hoists are Metric Rated except the Spark Resistant models.

Series 2200 Air

Hoists

When ordering always specify the following: Lift Pendant/pull cord drop

BUDGIT®

Metal chain containers are standard on all standard models for lifts up to 25' (1-part chain) and 22' (2-part chain) except for spark resistant or roller chain models which is not included. To price hoists with chain containers above standard lifts, deduct $97 for 1 part chain and $191 for 2 part chain from standard hoist list price and add the appropriate chain container on page 25.

Hook Suspension Lug Suspension

TypeCapacity

(tons)

Pull CordControl

**LiftingSpeedMax(fpm)

**Lowering

SpeedMax(fpm) Price Type

Capacity(tons)

Pull CordControl


**Lowering

SpeedMax(fpm) Price

CatalogNumber

NetWt

(lbs)CatalogNumber

NetWt

(lbs)

Link ChainStandard

Model

1/41/21

221122152219

363649

654523

9512060

275427603394

Link ChainStandard

Model

1/41/21

225122552259

363649

654523

9512060

275427603394

Link ChainSpark and CorrosionResistant

3/83/4

22412243

3649

6029

10052

33984307


3/83/4

22812283

3649

6029

10052

33984307

RollerChain

1/41/21

220122032205

373751

654523

9512060

289128913548

Hook Suspension Lug Suspension

TypeCapacity

(tons)CatalogNumber

NetWt

(lbs)


**Lowering

SpeedMax(fpm) Price Type

Capacity(tons)

CatalogNumber

NetWt

(lbs)


**Lowering

SpeedMax(fpm) Price

Link ChainStandard

Model

1/41/21

221222162220

464659

654523

9512060

327032743908

Link ChainStandard

Model

1/41/21

225222562260

464659

654523

9512060

327032743908


3/83/4

22422244

4659

6029

10052

39224827


3/83/4

22822284

4659

6029

10052

39224827

RollerChain

1/41/21

220222042206

474761

654523

9512060

341534154073

Capacity(tons)

Standard ChainPlated Link

Chain

PendantHoseDrop(ft)

RollerChain

Models

LinkChain

Models

Add For Each

Additional Foot of Lift

1/4, 1/21

* 3/8 Spark Resistant* 3/4 Spark Resistant

28.9357.89

— —

13.9227.8252.61105.25

13.9227.8252.61105.25

5.87

23

6000 Series Air Chain Hoists

Recommended options: Filter & Lubricator Regulator (if line pressure is over 110 PSI)

If any 6000 series air hoist is ordered other than the standard above, the following model numbers will appear on the hoist and box.

EXAMPLE

6000 Series Air Hoist


BAHC 0113 BAHC 01 13 Budgit Capacity Speeds (Lifting)

Air 50 = 1/2 ton (SR only) (fpm)

Hoist 01 = 1 ton 13

02 = 2 ton 30

03 = 3 ton 06

15

04

10

16 (SR)

08 (SR)

05 (SR)

BUDGIT®

The following list of 6000 series catalog numbers are Budgit standard models, all with 10' lifts only.

911641C 911651C

911642C 911652C

911644C 911694C

24

When ordering always specify the following: Lift Pendant dropStandard Pendant Control Drop is 6'.* Maximum pendant control drop is 36 ft.

6000 Series Air Chain Hoists½ - 3 Ton Capacities

Capacities 1 to 3 TonsPendant Throttle Control

Note: All 6000 Series hoists include a load brake.

Note: 10' lifts are standard, longer lifts available. Equipped with 6' pendant control hose. Speeds based on 90 psi line pressure with full rated hoist load. Rated air supply is 80 cfm (full load – full speed). Always install a filter and lubricator in air line for each hoist.

Add-on Prices for Other Than Standard 10' LiftsTo compute total price of hoist with other than standard 10' lift, add to the price of desired 10' lift hoist the additional charges as instructed below:

*1. If control hose is to be lengthened, add the charge for each additional foot of hose over 6 feet.

2. If load chain is to be lengthened add the charge for each additional foot of lift over 10 feet.

Series 6000 Air Chain Hoists are Metric RatedPolyethylene Chain containers are standard on all 6000 Series chain hoists (BAHC) 1 Ton for 28' lift or less, 2 Ton for 20' of lift or less and 3 Ton for 16' of lift or less except for spark resistant models which are not included. To price hoists with chain containers for lifts greater than the standard lifts mentioned, deduct $87 for 1 Ton, $141 for 2 Ton or $159 for 3 Ton from standard 10' list price, then add the appropriate fabric or metal chain container listed on page 10 or 11. On 1 Ton Hoists with lifts 18' or less, we will provide the #922440 chain container. Until January, 2009 a fabric chain container may be shipped in lieu of the Polyethylene at our discretion. Polyethylene Chain containers are designed to fit current 6000 series (BAHC) or newer models. For older 6000 series (BAH) models, a fabric or metal chain container must be used.

Add-on Prices for Other Than Standard 10' Lifts

Series 6000 Air

Hoists

BUDGIT®

Standard Models

Capacity(tons)

Load ChainPer Foot Lift

Plated Load Chain

Pendant Hose*Per Foot Lift

Each Additional Foot of Lift

HoistOnly

Hoist & AMDT

123

17.6635.3353.00

17.6635.3353.00

9.44 15.80

Spark and Corrosion Resistant Models

½12

77.86155.73233.59

---

9.44 15.80

Hook Suspension — Standard Models

Capacity(tons)

CatalogNumber

NetWt.


(fpm)


(fpm)

Parts ofLoad Chain Price

1911644C911641C

9799

1330

1842

142724379

2911645C911642C

114116

615

921

252595365

3911646C911643C

148150

410

614

361066212

Hook Suspension — Spark and Corrosion Resistant Models

½ 911683C 99 16 22 1 5419

1 911684C 116 8 11 2 6234

2 911685C 150 5 7 3 7624

Lug Suspension — Standard Models

Capacity(tons)

CatalogNumber

NetWt.


(fpm)


(fpm)

Parts ofLoad Chain Price

1911654C911651C

110112

1330

1842

142724379

2911655C911652C

120122

615

921

252595365

3911656C911653C

168170

410

614

361066212

Lug Suspension — Spark and Corrosion Resistant Models

½ 911693C 114 16 22 1 5419

1 911694C 124 8 11 2 6234

2 911695C 174 5 7 3 7624

25

Air Hoist Accessories

Air Motor-Driven Trolleys *Equipped with 7-foot pendant control hose.For longer than 7-foot control add $9.58/ft. (trolley only).Always specify the Hoist Catalog Number that will operate with the trolley.Models for Patented Track with narrow flat tread steel wheels are available.Models with extended Beam Flange Adjustment are available.Use the electric trolley beam flange adjustment pricing on page 6.Maximum pendant control drop is 36 ft.

Chain Containers for Air Hoists

Longer Lift Chain ContainersSeries 2200 Air Chain Hoists

*½ ton insert number 11 ton insert number 22 ton insert number 3

Link chain hoists using these long lift containers must be lug suspended, cross mounted.Chain containers are supported from the trolley suspension pins.Chain containers are low headroom design, 10½ inches wide.Chain container depth (S Dim.) for 6000 series chain hoist is the same as the electrics on page 10 & 11.

4 lever pendant throttle control is standard with all trolleys ordered with a 6000 series Air Hoist

For cloth chain container see pages 11For standard metal chain containers see pages 10 & 11

BUDGIT®

Standard

TrolleyCatalogNumber

Capacity(tons)

StandardFlange

Width Adj.

NetWt.(lbs)

TraverseSpeed(fpm) Price

911706911707911708

1/4, 1/2 &123

3 - 5"3-5/8" - 6-

1/4"4 - 6-1/4"

95105150

506060

328233473946

Spark and Corrosion Resistant

911710911711911712

3/8, 1/2, & 3/412

3 - 5"3-5/8" - 6-

1/4"4 - 6-1/4"

95105150

506060

414242094807

Standard Metal Chain Container for Series 2200 Air Hoists

CatalogNumber

ChainType

Maximum Lift in Feet

Wt.(lbs) Price

1/4, 3/8, 1/2 Ton

3/4, 1Ton

902631902635902632902633

LinkLink

RollerRoller

25451530

1222—15

4 1/29

6 1/211

97199155199

Spark and Corrosion Resistant Chain Containerfor Series 2200 Air Hoists

902634902636

Link2545

1222

510

415452

Cloth Chain Containers

702635 Link 45 22 9 137

Standard Link Chain

Part Number Suspension

Depth(S Dim.)

Maximum Lift

Price¼ & ½

Ton 1 Ton

444620-21 Hook or Lug 22 ½ 60 30 173

444620-26

Lug

28 ½ 75 37 248

444620-31 33 ½ 90 45 321

444620-35 37 ½ 105 52 350

Spark and Corrosion Resistant Link Chain

Part Number Suspension

Depth(S Dim.)

Maximum Lift

Price3/8 Ton 3/4 Ton

444551-21 Hook or Lug 22 ½ 60 30 602

444551-26

Lug

28 ½ 75 37 626

444551-31 33 ½ 90 45 657

444551-35 37 ½ 105 52 683

Spark & Corrosion Resistant Container for Series 6000 Air Hoists

CatalogNumber

Maximum Lift in FeetWt.(lbs)

userprice1/2 Ton 1 Ton 2 Ton

905444905445905446905447905448905449

153045607590

do not use1522303745

do not use1015202530

4810141516

379396482571624658

Spark and Corrosion ResistantLonger Lift Chain Containers for Series 6000

Chain Container Catalog Number

Maximum Lift In Feet

Price½ Ton 1 Ton 2 Ton

439425-*1SR 60 30 20 746

439425-*2SR 90 45 30 773

439425-*3SR 120 60 40 798

439425-*4SR 150 75 50 815

439425-*5SR 180 90 60 841

439425-*6SR 210 105 70 874

* Specify whether air motor trolley will be used with either 2200 series or 6000 series model at time of order


CatalogNumber

ChainContainer Depth

Maximum Lift in ft. ListPrice1 ton 2 ton 3 ton

922440922441922442922443

10-3/1612-5/1615-13/1620-1/16

18284050

9142025

691316

8787141159

26

Catalog Number For Hose SizePriceEach

254 5/8" - 1½" Hose 31

Wire Rope Festoon SystemsFor Air supply hose ½" to 1" ID hose

CatalogSystemNumber

WorkingTravel

(ft)

LoopDepth

(ft)

OverallLength

(ft)Shipping

Wt. Price

90160116 3 18.5

11 292

21 4 23.5

90160228 3 31.1

13 43237 4 40.1

90160340 3 43.6

15 59352 4 55.6


2268 80

Pendant Throttle Conversion KitKit for converting the pull cord Series 2200 BUDGIT Air Hoist to pendant throttle operation.


2269 839

CatalogNumber

ID(in)

OD(in) Braid

Max.PSI

Wt./Ft.

Price(ft)

901610901611901612

1/23/41

15/161 1/41 1/2

122

200225200

0.330.520.65

2.883.345.18

FittingsMale swivel at each end

CatalogNumber

Hose ID(in)

Thread SizeM-NPT

Price(pair)

901614901615901616

1/23/41

3/81/23/4

374062

Fittings With Quick DisconnectQuick disconnect on one end-standard male swivel on opposite end

CatalogNumber

Hose ID(in)

Thread SizeM-NPT

Price(pair)

901618901619901620

1/23/41

3/81/23/4

5980

137

Air Hoist Accessories

Air Hose AssemblyAssembly requires Catalog Number for both hose and fittings.

Air Hose Trolleys - 2-5/8" - 6" flange

Filter-Lubricator Units

For longer than 6" ft. pendant hose, add $5.98 per foot.

Recoil Air HoseSelf-Storing Air Hose with Fittings

Redundant SupportHoist Suspension redundant support for Series 2200 Hoist

System Includes: End clamp assemblies, Hardware Kit, Intermediate carriers (quantities based upon overall length). Nylon covered wire rope per required length.

2200 Series Lug KitConverts hook mount to lug

* Not for use with 6000 Series Air Hoist.

BUDGIT®

CatalogNumber

HoseSize

(ID in) X

WorkingLength

(ft) Fittings Each End Price

901621901622

1/21/2

xx

1525

3/8 NPTF MaleSwivel Fittings

110137

901624901625901626

3/43/43/4

xxx

152550

3/4 NPTF MaleSwivel Fittings

220274440

Nylon coated cable with eyebolt fittings each end for supporting recoil air hose (supports by others).

CatalogNumber

Length(ft) Price

901629901630

2550

5997

Filter-Lubricator Units

CatalogNumber

Inlet/Outlet Size (in) Bowl Size

ShippingWt. Price

* 902960* 902961 902962 902963

3/8 (2200 Series)1/2 (AMDT)

3/4 (6000 Series)1

11 oz.11 oz.24 oz.24 oz.

671115

199237440440

Filter-Regulator-Lubricator Units

CatalogNumber

Inlet/Outlet Size (in) Bowl Size

ShippingWt. Price

* 902966* 902967 902968 902969

3/8 (2200 Series)1/2 (AMDT)

3/4 (6000 Series)1

11 oz.11 oz.24 oz.24 oz.

14152020

292358605605

Catalog NumberCapacity

(tons) Price

22185610 1/4, 1/2 and 3/8 77

22412301 3/4 and 1 137

27

Air Hoist AccessoriesBUDGIT®

Supplemental, External Muffler, In addition to our standard internal mufflers Price

Series 2200 Air Chain Hoist.................................................................................................................................................................Series 6000 Air Chain Hoist or Air Motor Driven Trolley..............................................................................................................each

170438

Deduct Two Lever Pendant Throttle Control, pendant by others

Series 2200 Air Chain Hoist.................................................................................................................................................................Series 6000 Air Chain Hoist or Air Motor Driven Trolley..............................................................................................................each

-(190)-(193)

Add Six Lever Pendant to Trolley & Hoist............................................................................................................................................Add Four Lever Pendant to Trolley without hoist.................................................................................................................................Add Four Lever Pendant to 2200 with Motor Driven Trolley.................................................................................................................

1588667548

Zinc Plated Hooks

2200 Series - Add per hook.................................................................................................................................................................6000 Series - Add per hook.................................................................................................................................................................

6043

Drop Stops (safety lugs) and bumpers for AMDT & Heavy Duty Rigid Mount Trolleys

Drop Stops (steel only)........................................................................................................................................................................Drop Stops with Rubber Bumpers.......................................................................................................................................................

290582

Patented Track Wheels Air Motor Driven Trolleys, 3¼ inch minimum flange width

Standard Trolley...................................................................................................................................................................................Spark Resistant Trolley.........................................................................................................................................................................

366765

Food Grade Lubrication Hoists

Series 2200 Air Chain Hoist.................................................................................................................................................................Series 6000 Air Chain Hoist.................................................................................................................................................................

N/C 107

Epoxy Enamel Paint, three coat system per data sheet

Each Hoist, Trolley & Chain Container combination............................................................................................................................ 606

Rigid Top Hook - not available on spark resistant units

Series 2200..........................................................................................................................................................................................Series 6000 1 & 2 Ton.........................................................................................................................................................................Series 6000 3 Ton................................................................................................................................................................................

3826128

Relabeling of 2200 series hoist capacity.............................................................................................................................................. 142

Derate and Reset Clutch - 6000 Series............................................................................................................................................... 222

Trolley Travel Limit Switch (trip dog by others).....................................................................................................................................

2416

28

Underhung & Top RunningPush Type Bridge Crane Kits

Push Type Underhung

Push Type Top Running*

End connection kit sold separately #51525050 $170 listFor complete specifications, see Bulletin # CS/L-1003-0206.

*Wheels are designed to be run on ASCE rail only, for square bar applications contact factory.

BUDGIT®

CatalogNumber

RunwayBeam Flange

Adjustment Range

MaximumCapacity

(tons)

MaximumSpan

(ft) Remarks

KitWeight

(lbs) Price

Angle Construction Trucks

905360

3" - 8"

1/2 30Pressed Steel Wheels

300

848

9053601 24

848

905360SR Spark Resistant Wheels 2396

9053613 3/8" - 8"

2 30

Pressed Steel Wheels 310 943

905362 Forged Steel Wheels

320

1442

905362PT 3 1/4" Patented Track Wheels 1825

905362SR 3 3/8" - 8" Spark Resistant Wheels 3226

Channel Construction Trucks

905368 3 3/8" - 5 1/2"

336

Forged Steel Wheels

380 1825

905368W1 5 1/2" - 8" 390 2006

905368W2 8" - 10 1/2" 400 2083

905368SR 3 3/8" - 5 1/2" Spark Resistant Wheels380

3574

905368PT 3 1/4" Patented Track Wheels 2234

905368S 3 3/8" - 5 1/2" 24 3' - 0" Short Wheelbase 330 2547

905524 4" - 6 1/4"

536

Forged Steel Wheels

550 3035

905524W1 6 3/8" - 9" 560 3243

905524W2 9" - 11 1/2" 570 3336

905524PT 3 1/4" Patented Track Wheels550

3606

905524SR4" - 6 1/4"

Spark Resistant Wheels 4897

905524S 24 3' - 0" Short Wheelbase 495 3758

CatalogNumber

Maximum Capacity(tons)

Maximum Span(ft) Remarks

ShippingWt. (lbs) Price

904535

5

368" Ductile Iron Wheels

4502440

904535SR 8" Spark Resistant Wheels 7693

904535S 248" Ductile Iron Wheels

3' - 0" Short Wheel Base405 3164

29

UnderhungHand Geared Bridge Crane Kits

Kit Consists of: 904550 Hand Chain Wheel 2 End Trucks - (1 pair) Components Detailed in Application Guide 36' Hand Chain Cross Shaft Support as noted above * For flange widths of 5-1/2" - 8" add $254 1 Hand Chain Link Cross Shaft Coupling as noted above * For flange widths of 8" - 10-1/2" add $325 * For patent track add $390 **For flange widths of 6-3/8" - 9" add $260 **For flange widths of 9" - 11-1/2" add $490 **For patent track add $673

Spark Resistant

Standard kit hand chain is zinc plated, 36' long. Additional hand chain per lineal ft. add $4.33. Spark resistant kit hand chain aluminum, 36' ft. long. Additional spark resistant hand chain per lineal ft. add $9.75 .

Hand Geared Underhung - For Runway Flange Widths of 3-3/8" - 5-1/2" for 3 Max Tons *

Standard For Runway Flange Widths of 4" - 6-1/4" for 5 Max Tons **

Note: Bridge Beam not Included in Kit

BUDGIT®

MaxCapacity

(tons)

MaxSpan

(ft)Kit

NumberList

Price Weight

End TruckCatalogNumber

Kit Consists of:

Cross Shaft Support Cross Shaft Coupling

QtyCatalogNumber Qty

CatalogNumber

3

15 B03/15UHG 3013 440

905369*4' - 6" WB

1

905373

2

905374

22 B03/22UHG 3106 442 2 2

29 B03/29UHG 3251 446 3 3

36 B03/36UHG 3342 448 4 3

5

15 B05/15UHG 3966 520

905525**4' - 6" WB

1 2

22 B05/22UHG 4057 522 2 2

29 B05/29UHG 4203 526 3 3

36 B05/36UHG 4295 528 4 3

MaxCapacity

(tons)

MaxSpan

(ft)Kit

NumberList

Price Weight


Kit Consists of:



CatalogNumber

3

15 B03/15UHGSR 4534 480

905369SR4' - 6" WB

1

905373

2

905374

22 B03/22UHGSR 4626 482 2 2

29 B03/29UHGSR 4771 486 3 3

36 B03/36UHGSR 4863 488 4 3

5

15 B05/15UHGSR 6047 570

905525SR4' - 6" WB

1 2

22 B05/22UHGSR 6139 572 2 2

29 B05/29UHGSR 6283 576 3 3

36 B05/36UHGSR 6375 578 4 3

30

Hand Geared Top RunningStandard

Top-RunningHand Geared Bridge Crane Kits

Kit Consists of: 904550 Hand Chain Wheel 2 End Trucks - (1 pair) 36' Hand Chain Cross Shaft Support as noted above 1 Hand Chain Link Cross Shaft Coupling as noted above

Spark Resistant

End connection kit sold separately 51525050 $162 List

Standard kit hand chain is zinc plated, 36' long. Additional hand chain per lineal ft. add $4.33. Spark resistant kit hand chain aluminum, 36' ft. long. Additional spark resistant hand chain per lineal ft. add $9.75.

Wheels are designed to be run on ASCE rail only, for square bar applications contact factory.

BUDGIT®

MaxCapacity

(tons)

MaxSpan

(ft)Kit

NumberList

Price Weight


Kit Consists of:



CatalogNumber

5

15 B05/15TH 3766 500

9045364' - 6" WB

1

904540

2

90537422 B05/22TH 3858 515 2 2

29 B05/29TH 4003 532 3 3

36 B05/36TH 4095 549 4 3

5

15 B05/15THSR 9299 550

904536SR4' - 6" WB

1

904540

2

90537422 B05/22THSR 8403 565 2 2

29 B05/29THSR 9536 582 3 3

36 B05/36THSR 9628 599 4 3

31

UnderhungMotorized Bridge Crane Kits

Motor Driven with Single Drive Underhung - For Runway Flange Width of 3-3/8" - 5-1/2" **

*Specify: 1=Single Speed Kit Consists of: 2 End Trucks - (1 pair) 1 Reducer 2=Two Speed 1 Motor 1 Control Panel (NEMA 1) 1 Disconnect (NEMA 1) Cross Shaft Support as noted above Cross Shaft Coupling as noted aboveSpecify Voltage when ordering - Add $302 to kit price for single phase onlyComponents Detailed in Application Guide**For flange widths of 5-1/2" - 8" add $254 **For flange widths of 8" - 10-1/2" add $325 **For Patented Track add $390

Motor Driven with Single Drive Underhung - For Runway Flange Width of 4" - 6-1/4" **

*Specify: 1=Single Speed Kit Consists of: 2 End Trucks - (1 pair) 1 Reducer 2=Two Speed 1 Motor 1 Control Panel (NEMA 1) 1 Disconnect (NEMA 1) Cross Shaft Support as noted above Cross Shaft Coupling as noted above

Specify Voltage when ordering - Add $302 to kit price for single phase onlyComponents Detailed in Application Guide**For flange widths of 6-3/8" - 9" add $260 **For flange widths of 9" - 11-1/2" add $490 **For Patented Track add $673

BUDGIT®

MaxCapacity

(tons)

MaxSpan

(ft)Speed(fpm)

KitNumber

List Price Weight

End TruckCatalog Number

Kit Consists Of:

1 Speed 2 Speed 1 Speed 2 Speed

Cross Shaft

Support

Cross Shaft

CouplingDrive(hp)

1/4thru

3

8

55 B03/08UC*55 4313 4585

524 544

9053694' - 6" WB

0

2

1/2

70 B03/08UC*70 4313 4585

110 B03/08UC*110 4313 4585

15

55 B03/15UC*55 4404 4673

544 564 170 B03/15UC*70 4404 4673

110 B03/15UC*110 4404 4673

22

55 B03/22UC*55 4496 4761

564 584 270 B03/22UC*70 4496 4761

110 B03/22UC*110 4496 4761

29

55 B03/29UC*55 4642 4901

586 606 3

3

70 B03/29UC*70 4642 4901

110 B03/29UC*110 4642 4901

36

55 B03/36UC*55 4734 4989

606 626 470 B03/36UC*70 4734 4989

110 B03/36UC*110 4734 4989

MaxCapacity

(tons)

MaxSpan

(ft)Speed(fpm)

KitNumber

List Price Weight

End Truck Catalog Number

Kit Consists Of:

1 Speed 2 Speed 1 Speed 2 SpeedCross Shaft

Support

Cross Shaft

CouplingDrive(hp)

5

8

50 B05/08UC*50 5265 5501

524 544

9055254' - 6" WB

0

2

1/2

65 B05/08UC*65 5265 5501

100 B05/08UC*100 5265 5501

15

50 B05/15UC*50 5357 5589

544 564 165 B05/15UC*65 5357 5589

100 B05/15UC*100 5357 5589

22

50 B05/22UC*50 5449 5677

564 584 265 B05/22UC*65 5449 5677

100 B05/22UC*100 5449 5677

29

50 B05/29UC*50 5594 5817

586 606 3

3

65 B05/29UC*65 5594 5817

100 B05/29UC*100 5594 5817

36

50 B05/36UC*50 5686 5905

606 626 465 B05/36UC*65 5686 5905

100 B05/36UC*100 5686 5905

32

UnderhungMotorized Bridge Crane Kits

Motor Driven with Dual Drive Underhung - 36' Span Kit - For Runway Flange Width of 3-3/8" - 5-1/2" ** 48' Span Kit for Runway Flange Width 4"-6¼" †

*Specify: 1=Single Speed Kit Consists of: 2 End Trucks - (1 pair) 2 Reducers 2=Two Speed 2 Motors 1 Control Panel (NEMA 1) 1 Disconnect (NEMA 1)

Specify Voltage when ordering - Single Phase not availableComponents Detailed in Application Guide** For flange widths of 5-1/2" - 8" add $254** For flange widths of 8" - 10-1/2" add 325** For Patented Track add 390† For Flange Widths of 6-3/8" - 9" add 260† For Flange Widths of 9" - 11-1/2" add 490


Specify Voltage when ordering - Single Phase not availableComponents Detailed in Application Guide**For flange widths of 6-3/8" - 9" add $260**For flange widths of 9" - 11-1/2" add $490**For Patented Track add $673

Motor Driven with Dual Drive Underhung With 4'-6" WB - For Runway Flange Width of 4" - 6-1/4" **

Control Panel Options

BUDGIT®

MaxCapacity

(tons)

MaxSpan

(ft)Speed(fpm)

KitNumber

List Price Weight End Truck Catalog Number

Drive(hp)1 Speed 2 Speed 1 Speed 2 Speed

1/4thru

3

36

55 B03/36UD*55 5181 5874

545 565905369

4'-6" WB(2) 1/270 B03/36UD*70 5181 5874

110 B03/36UD*110 5181 5874

48

55 Not Available

70 B03/48UD*70 6596 7288645 665

9053806'-0" WB

(2) 1/2110 B03/48UD*110 6596 7288

MaxCapacity

(tons)

MaxSpan

(ft)Speed(fpm)

KitNumber



5 36

50 B05/36UD*50 6133 6826

665 685 905525 (2) 1/265 B05/36UD*65 6133 6826

100 B05/36UD*100 6133 6826

To Eliminate Panel and Disconnect Deduct

1 Speed 2 Speed

-(919) -(1137)

To Upgrade to NEMA 4 - Add: 754

33

Top RunningMotorized Bridge Crane Kits

*Specify: 1=Single Speed Kit Consists of: 2 End Trucks - (1 pair) 1 Reducer 2=Two Speed 1 Motor 1 Control Panel (NEMA 1) 1 Disconnect (NEMA 1) Cross Shaft Support as noted above Cross Shaft Coupling as noted above

Motor Driven with Single Drive - Top Running


Motor Driven with Dual Drive - Top Running


Specify Voltage when ordering - Add $302 to kit price for single phase onlyComponents Detailed in Application Guide

Wheels are designed to be run on ASCE rail only, square bar applications are available upon request.

Square bar requirements; width 40mm maximum (1½" maximum), height 40 mm minimum (1½" minimum).


Specify Voltage when ordering - Single Phase not availableComponents Detailed in Application Guide

Wheelbase exceeding 54" - line shaft drive applicable on 36' span and below only

Control Panel Options

BUDGIT®

MaxCapacity

(tons)

MaxSpan

(ft)Speed(fpm)

KitNumber

List Price Weight

End Truck Catalog Number

Kit Consists Of:

1 Speed 2 Speed 1 Speed 2 Speed

Cross Shaft

SupportCross Shaft

CouplingDrive(hp)

1thru

5

8

50 B05/08TC*50 4884 5349

529 554

9045364' - 6" WB

0

2

1/2

70 B05/08TC*70 4884 5349

100 B05/08TC*100 4884 5349

15

50 B05/15TC*50 4975 5440

544 569 170 B05/15TC*70 4975 5440

100 B05/15TC*100 4975 5440

22

50 B05/22TC*50 5067 5532

559 584 270 B05/22TC*70 5067 5532

100 B05/22TC*100 5067 5532

29

50 B05/29TC*50 5213 5677

576 601 3

3

70 B05/29TC*70 5213 5677

100 B05/29TC*100 5213 5677

36

50 B05/36TC*50 5305 5769

591 616 470 B05/36TC*70 5305 5769

100 B05/36TC*100 5305 5769

MaxCapacity

(tons)

MaxSpan

(ft)Speed(fpm)

KitNumber



1thru

5

36

50 B05/36TD*50

5752 6453 575 615904536

4'-6" WB(2) 1/270 B05/36TD*70

100 B05/36TD*100

48

50 Not Available

70 B05/48TD*706591 7370 675 715

9045496'-0" WB

(2) 3/4100 B05/48TD*100

To Eliminate Panel and Disconnect Deduct

1 Speed 2 Speed

-(919) -(1137)

To Upgrade to NEMA 4 - Add: 754

34

Individual Crane Components& Options

Underhung

BUDGIT®


Wt.(lbs)

List Price

CatalogNumber

RunwayBeam Flange Remarks

Wt.(lbs)

List Price

Underhung End Trucks - (1 pair)

905369905369W1905369W2905369SR905369PT905369S905380905380W1905380W2

3-3/8" - 5-1/2"5-1/2 - 8"

8" - 10-1/2"3-3/8" - 5-1/2"

3-1/4"3-3/8" - 5-1/2"

4" - 6-1/4"6-3/8 - 9"

9" - 11-1/2"

Standard - 3 tonWider FlangeWider FlangeSpark ResistantPatented Track3'-0" Short Wheelbase6'-0" WheelbaseWider FlangeWider Flange

440450460440440390540550560

243427012776384328433156392342064299

905525905525W1905525W2905525SR905525PT905525S

4" - 6-1/4"6-3/8 - 9"

9" - 11-1/2"4" - 6-1/4"

3-1/4"4" - 6-1/4"

Standard - 5 tonWider FlangeWider FlangeSpark ResistantPatented Track3'-0" Short Wheelbase

560570580560560505

343637103952543541444297

Patented Track, Spark Resistant Underhung End Trucks - (1 pair)

905369PTSR905525PTSR

3 Ton Geared5 Ton Geared

434510383

Drive Components Wt. Price

9053749053739045508282

8282SR

Cross Shaft CouplingCross Shaft SupportHand Chain Wheel for Budgit TrucksHand Chain 36 lineal feetHand Chain 36 lineal ft. Spark Resistant

220101816

5697365164356

Gear Reducers

Catalog No.

Traverse Speed ShipWt. Price3 Ton 5 Ton

905376905377905378

110 fpm GR - 10:170 fpm GR - 15:155 fpm GR - 20:1

100 fpm GR - 10:165 fpm GR - 15:150 fpm GR - 20:1

20753

(each)

Electrical and Control Options Wt. Price

Warning HornNEMA 4 Travel Limit Switch (Trip Dogs by Others)

6831067

Electronic Acceleration Control (EAC) — 115 volt control

904596

904598

913186

Single Speed .75 HP Max 208-230 - 3 - 60 2 HP Max 460 - 3 - 60Two Speed .75 HP Max 208-230 - 3 - 60 2 HP Max 460 - 3 - 60Single Speed or Two Speed 2 HP Max 208-230-3-60

10

357

456

681

Bridge Brakes

904554904555904556

3 ft. lb.Adjustable Brake

120/240 - 1 - 60230/460 - 3-60575 - 3 - 60

15456

(each)

Motor Protection Wt. Price

TAS

TOL

Temperature Actuated Switch in Motor WindingThermal overload relays (3 phase) in enclosure

—

25

Std.

203

CatalogNumber Horse Power Power Supply

Wt.(lbs)

List Price

Motor - Single Speed328795-32328795-33

.5 HP-1800 RPM208-230/460-3-60575 - 3 - 60

2525

274

Motor - Half-Speed Single Speed (provides traverse speed 50% of that listed)

328795-26328795-27

.25 HP 900 RPM230/460-3-60575 - 3 - 60

30 436

Motor - Two Speed - slow speed is one third of listed speed328796-24328796-25328796-26328796-27

.5/.17 HP1800/600 RPM

200-208-3-60230 - 3 - 60460 - 3 - 60575 - 3 - 60

45 523

Motors - Single Phase - single motor - single speed only

328797-22.5 HP1800 RPM

115/230 - 1 - 60 30 554


Wt.(lbs)

List Price

Control Panels - Single Speed - (3 ph Underhung)

446003134460031444600311

460v - 3 ph - 60 Hz - 905386575v - 3 ph - 60 Hz - 905387208-230v - 3 ph - 60 Hz (1 hp) - I.D.

202050

673

Control Panels - Single Phase - (1 ph Underhung)

4460030544600315

115v - 1 ph - 60 Hz - 905364230v - 1 ph - 60 Hz - 905365

20 724

Control Panels - Two Speed - (3 ph Underhung)

446003434460034444600351

460v - 3 ph - 60 Hz - 905398575v - 3 ph - 60 Hz - 905399208-230v - 3 ph - 60 Hz (1 hp) - I.D.

252550

903

Fused Disconnect Switch - Standard Wt. Price

905388905389

208-230v - 3 ph - 60 Hz460-575v - 3 ph - 60 Hz

10203294

Fused Disconnect Switch - Single Phase

905366905367

115v - 1 ph - 60 Hz230v - 1 ph - 60 Hz

10 240

Weatherproofing (add for each enclosure) Wt. Price

NEMA 4/12

NEMA 7 or 9

Watertight and dust-tight for indoor and outdoor service............Apply to factory

20—

343—

Bridge Bumpers Wt. Price

932000 Rubber Bumpers - Underhung 20 78

Air Motor Drive Package Wt. Price

904558

Includes air motor, gear reducer, control head with pendant throttle and hose assembly with 8 ft. hose drop. Traverse speed approx. 70 fpm. Requires catalog 902967 filter- regulator-lubricator mounted near air motor. For additional pendant hose over 8' - 0" Add per foot ...................

1153556

9.48

35

Individual Crane Components& Options

Top Running

BUDGIT®


Wt.(lbs)

List Price

Top Running End Trucks - (1 pair)

904536904536SR904536S904549904549SR

StandardSpark Resistant Wheels3' - 0" Short Wheelbase6' - 0" WheelbaseSpark Resistant Wheels

450450395550550

30358859375835199071

Drive Components

90454090537490455082828282SR

Cross Shaft SupportCross Shaft CouplingHand Chain WheelHand ChainSpark Resistant Hand Chain

202101816

9756365164356

Gear Reducers

905376905377905378

Traverse Speed 100 fpm GR - 10:1Traverse Speed 70 fpm GR - 15:1Traverse Speed 50 fpm GR - 20:1

20753

(each)

Ballast Resistors (single drive only)

905391905392905393

SS and 2S 208-230 - 3 - 60SS and 2S 460 - 3 - 60SS and 2S 575 - 3 - 60

10 300

CatalogNumber Horse Power Power Supply

Wt.(lbs)

List Price

Motors - Single Speed

328795-32328795-33

.5 HP-1800 RPM208-230/460-3-60575 - 3 - 60

25 274

328795-42328795-43

.75 HP-1800 RPM208/230/460-3-60575-3-60

25 324

Motors - Half-Speed Single Speed (provides traverse speed 50% of that listed)328795-26328795-27

.25 HP 900 RPM208-230/460-3-60575 - 3 - 60

30 436

Motors - Two Speed - slow speed is one third of listed speed

328796-24328796-25328796-26328796-27

.5/.17 HP1800/600 RPM

200-208-3-60230 - 3 - 60460 - 3 - 60575 - 3 - 60

45 523

328796-34328796-35328796-36328796-37

.75 HP-1800/600 RPM

200-208-3-60230-3-60460-3-60575-3-60

45 616

Motors - Single Phase - single motor - single speed only

328797-22.5 HP1800 RPM

115/230 - 1 - 60 30 554


Wt.(lbs)

List Price

Control Panel -Single Speed (3 ph Top-Run)446003264460038344600384

208-230v - 3 ph - 60 Hz - 904541460v - 3 ph - 60 Hz - 904542575v - 3 ph - 60 Hz - 904543

20

673

446003294460032744600328

208-230v - 3 ph - 60 Hz - 3/4 hp motor460v - 3 ph - 60 Hz - 3/4 hp motor575v - 3 ph - 60 Hz - 3/4 hp motor

731

Control Panel - Two Speed (3 ph Top-Run)

446003364460039344600394

208-230v - 3 ph - 60 Hz - 904546460v - 3 ph - 60 Hz - 904547575v - 3 ph - 60 Hz - 904548

25

912

446003394460033744600338

208-230v - 3 ph - 60 Hz - 3/4 hp motor460v - 3 ph - 60 Hz - 3/4 hp motor575v - 3 ph - 60 Hz - 3/4 hp motor

969

Control Panel - Single Phase Single Speed (1 ph Top-Run)

4460030544600315

115v - 1 ph - 60 Hz - 904544230v - 1 ph - 60 Hz - 904545

20 724

Fused Disconnected Switch

Standard

905388905389

208-230v - 3 ph - 60 Hz460-575v - 3 ph - 60 Hz

1010

203294

Single Phase

905366905367

115v - 1 ph - 60 Hz2304v - 1 ph - 60 Hz 10 240

Weatherproofing (add for each enclosure) Wt. Price

NEMA 4/12

NEMA 7 or 9

Watertight and dust-tight for in-door and outdoor service...............Apply to factory

20—

343—

Bridge Bumpers Wt. Price

932000 Rubber Bumpers - Underhung 20 78

Electrical and Control Options Wt. Price

Warning HornNEMA 4 Travel Limit Switch (Trip Dogs by Others)

6831067

Electronic Acceleration Control (EAC) — 115 volt control

904596

904598

913186

Single Speed .75 HP Max 208-230 - 3 - 60 2 HP Max 460 - 3 - 60Two Speed .75 HP Max 208-230 - 3 - 60 2 HP Max 460 - 3 - 60Single Speed or Two Speed 2 HP Max 208-230-3-60

10

357

456

681

Bridge Brakes

904554904555904556

3 ft. lb.Adjustable Brake

120/240 - 1 - 60230/460 - 3-60575 - 3 - 60

15456

(each)

Motor Protection Wt. Price

TAS

TOL

Temperature Actuated Switch in Motor WindingThermal overload relays (3 phase) in enclosure

—

25

Std.

203

Air Motor Drive Package Wt. Price

904558

Includes air motor, gear reducer, control head with pendant throttle and hose assembly with 8 ft. hose drop. Traverse speed approx. 70 fpm. Requires catalog 902967 filter- regulator-lubricator mounted near air motor. For additional pendant hose over 8' - 0" Add per foot ...................

1153556

9.48

36

Crane Component OptionsNEMA 4/12 Control Panels

Variable Frequency NEMA 4/12 Panel with Built In DisconnectFor Bridge Traverse Motions

Speed range up to 20:1 (in F.P.M.)

Price Includes;

Feature 1 h.p. Electromotive P3 CMAA Service Class C NEMA 4/12 Panel 20 X 16 X 8.5 Control Steps 2-step or 3-step infinitely variable Mainline Contactor 30 Amp Control Transformer 75VA Disconnect with Panel Mounted Handle 30 Amp External Dynamic Braking Resistor Yes Fuses Yes Hinge Point Horizontal at bottom of panel

One & Two Speed NEMA 4/12 Panels with Built in Disconnect(Standard NEMA1 Panels & Disconnects are on pages 34 & 45)

For Bridge Traverse Motions

Price Includes;

Feature 1 h.p. NEMA 4/12 Panel 20 X 16 X 8.8" Mainline Contactor 30 Amp** Control Transformer 115V/75VA Disconnect with Panel Mounted Handle 30 Amp** Fuses Yes Hinge Point Horizontal at bottom of panel

** Please check the total amperage draw requirements for your crane application so the amperage limits of the mainline contactor and disconnect are not exceeded. Especially on 230 volt applications.

Not available in 575 voltConsult factory for ¾ hp dual drive end trucks

BUDGIT®

Power SupplyMaximumTotal H.P.

MaximumFull Load Amps

Wt.(lbs)

CatalogNumber

ListPrice

230 Volts 1 5.0

50

44855021 2350

460 Volts 1 3.4 44855041-41 2447

230 Volts 2 8.0 448550-22 2541

460 Volts 2 3.4 448550-42 2447

MaximumTotal H.P.

List Prices For:

1 - Speed Panels

230 volts Catalog Number 460 volts Catalog Number 575 volts Catalog Number Weight (lbs)

1 1466 444231-21 1466 444231-41 1466 444231-51 75

MaximumTotal H.P.

2 - Speed Panels

230 volts Catalog No. 460 volts Catalog No. 575 volts Catalog No. Weight (lbs.)

1 1519 444232-21 1519 444232-41 1519 444232-51 85

37

Tractors

Tractor & Accessories ** Single unit for Monorail HoistsCapacities to 5 Tons

Standard unit is adjustable for standard I-beams and flat flange beams from 3.38" to 8" wide.

Tractors to operate on curved beams (36" minimum radius or larger) requires flangless wheels and guides rollers. Add $437 to list price.

Standard Pricing Includes Transformer, Control Fuse, 2 Button Pushbutton Station, 10 ft. Drop Cable and Strain Relief Chain.

Note: Specify Required Voltage, Phase, Frequency and Beam Size when ordering.

Prices are for three phase, for single phase see Options & Accessories.

Standard voltage is 230/460/3/60

For options or accessories not listed, consult factory for pricing and availability* When ordering, add "T" in front of single unit catalog number.Example: TBTD-235

**Prices are FOB Lisbon, Ohio

Note: Not CSA Approved

Note: 575/3/60 not ULC listed

BUDGIT®

Capacity SpeedCatalog Number Price

2000

35 BTD-235

2248

55 BTD-255

70 BTD-270

105 BTD-2105

3000

35 BTD-335

55 BTD-355

70 BTD-370

105 BTD-3105

5000

35 BTD-535

55 BTD-555

70 BTD-570

600035 BTD-635

55 BTD-655

10000 35 BTD-1035

Tractor Options & Accessories Price

Motor Brake 563

24V Controls (inlieu of standard 115V) 153

Mainline Contactor (does not include button) 305

Motor Fuses, Holder, Enclosure 332

Soft-start With Enclosure 501

4-Button Push Assembly 379



Extra Pushbutton cable (includes strain relief) Per ft. 4.65

Delete 2-button pendant station, deduct -67

Delete single speed controls, deduct -198

Twin unit for Underhung Bridges* (3 phase power only) 4232

NEMA 4 Panel 279

Single Phase (not available on 35 fpm models) 332

2 Speed Adder (not on 35 fpm) 760

Patented Track (straight track only) 110

12" Tow Bar 107

Drop Lug 202

575/3/60 131

38

Series USA Hand Chain Hoists

If any USA Manual Chain hoist is ordered other than the standard above, the following model numbers will appear on the hoist and box.

USA Manual Chain Hoist


USA 01 USA 01 USA Manual Capacity

Chain Hoist 25 = 1/4 ton

50 = 1/2 ton

01 = 1 ton

15 = 1½ ton

02 = 2 ton

03 = 3 ton

04 = 4 ton

05 = 5 ton

06 = 6 ton

BUDGIT®

The following list of USA Manual chain hoist catalog numbers are Budgit standard models.

8259 8261B 8262 8263B

8259E 8261C 8262B 8263SR

8259Z 8261D 8262D 8263Z

8260 8261G 8262SR 8264Z

8260Z 8261SR 8262Z 8266

8261 8261Z 8263 8307

39

Series USA Hand Chain Hoists

Capacities ¼ to 6 tons - Metric Rated Except for Spark Resistant ModelsEquipped with Hook Latches. Standard lift is 8 ft. Hand chain can drop approximately 1½ ft. above fully extended hook.

Lifts longer than Standard

Notice: MILITARY SPECIFICATIONS — BUDGIT Aluminum Chain Blocks and Track Clamps are on the Qualified Products List QPL-904 for military specifications. Contact factory for prices and delivery. FURNISH COMPLETE ORDERING DATA REQUIREMENTS.

Load Chain OptionSpecify for plated load chain in Hand Chain Hoists.

*Hand chain for ¼ and ½ ton spark resistant model units is everdur bronze, while the standard hand chain for spark resistant 1 - 6 ton models is aluminum. Standard hand chain drop is approximately 1½ feet above the full extended load hook.

BUDGIT®

Standard Models (Hook Suspended Models)

CatalogNum-ber

LiftingCapacity

(tons) Price

Extra for Each Additional Foot of Lift

NetWt.(lbs)

Lift(ft)

Load &Hand Chain

Load ChainOnly

Hand Chain OnlyPer Foot of

Drop

826082618262825982638264826582668267

¼½1

1½23456

733733861117713191823219425902609

18.6018.6021.7523.0523.0537.1937.1951.3451.34

10.2910.2912.8514.1514.1528.2928.2942.4442.44

8.318.318.908.908.908.908.908.908.90

25½25½33½505075

75½105106

8

Spark & Corrosion Resistant Models (Hook Suspended)

CatalogNum-ber

LiftingCapacity

(tons) Price

Extra for Each Additional Foot of Lift *

NetWt.(lbs)

Lift(ft)

Load & Hand Chain

Load ChainOnly

Hand Chain OnlyPer Foot of

Drop

8260SR8261SR8262SR8259SR8263SR8264SR8265SR8266SR8267SR

¼½1

1½23456

163516351769224323464224459762456275

79.4579.4568.1891.9091.90164.54164.54237.17237.17

48.9148.9148.9172.6372.63145.27145.27217.90217.90

30.5430.5419.2719.2719.2719.2719.2719.2719.27

25½25½33½505075

75½105106

8

CatalogNumber

Capacity(tons)

Lift(ft) Price

8260 B8260 C8260 D8260 E8260 F8260 G

¼

101215202530

77080786395610491142

8261 B8261 C8261 D8261 E8261 F8261 G

½

101215202530

77080786395610491142

8262 B8262 C8262 D8262 E8262 F8262 G

1

101215202530

9059481013112212311340

8259 B8259 C8259 D8259 E8259 F8259 G

1½

101215202530

122312691338145415691684

8263 B8263 C8263 D8263 E8263 F8263 G

2

101215202530

136514111480159617111826

8264 B8264 C8264 D8264 E8264 F8264 G

3

101215202530

189719722083226924552641

8265 B8265 C8265 D8265 E8265 F8265 G

4

101215202530

226823432454264028263012

8266 B8266 C8266 D8266 E8266 F8266 G

5

101215202530

269327952949320634633719

8267 B8267 C8267 D8267 E8267 F8267 G

6

101215202530

271228142968322534823738

40

Series USA andHand Chain Hoists

Series USA Lug Mounted Models (Hoist Only) - Metric Rated Except for Spark Resistant Models

Standard lift is 8'-0".Standard hand chain drop is approximately 1½ ft. above the fully extended load hook.

Notice: MILITARY SPECIFICATIONS BUDGIT Aluminum Chain Blocks and Track Clamps are on the Qualified Products List QPL-904 for military specifications. Contact factory for prices and delivery. Furnish complete ordering data requirements.

Note: If trolley drop stops are needed, please use pricing for heavy duty trolleys listed on page 18.

Series USA Army-Type Trolley Hoists - Metric Rated Except for Spark Resistant ModelsCapacities ¼ to 6 TonsStandard lift is 8'Standard hand chain drop is approximately 1½ ft. above the fully extended load hook.

Load Chain OptionSpecify for plated load chain in Hand Chain Hoists.

Hand chain for ¼ and ½ ton spark resistant model units is everdur bronze, while the standard hand chain for spark resistant 1-6 ton models is aluminum.Standard hand chain drop is approximately 1½ feet above the fully extended load hook. Trolley spark resistant hand chain is aluminum.

BUDGIT®

CatalogNumber

Capacity(tons)

Lug MountedHoist Price

Extra for Each Add'l Foot of Lift

Load &Hand Chain

Load ChainOnly

Hand Chain Only Per Foot

of Drop

Lug Mounted Models (Must add Rigid Mount Trolley)

830183028303830083048305830683078308

1/41/21

1-1/223456

9019011018120612851841201626762705

18.6018.6021.7523.0523.0537.1937.1951.3451.34

10.2910.2912.8514.1514.1528.2928.2942.4442.44

8.318.318.908.908.908.908.908.908.90

Spark & Corrosion Resistant Models (Must add Rigid Mount Trolley)


1/41/21

1-1/223456

169716971936257126534284441757315771

79.4579.4568.1891.9091.90164.54164.54237.17237.17

48.9148.9148.9172.6372.63145.27145.27217.90217.90

30.5430.5419.2719.2719.2719.2719.2719.2719.27

Push Type – Standard Models

CatalogNumber

Capacity(tons)

NetWt.(lbs) Price


Load & Hand Chain

Load ChainOnly


of Drop

831083118312831383148315831683178318

¼½1

1½23456

4242

60-1/298-1/298-1/2

150250-1/2

280281

111511151329163217132432287738623892

18.6018.6021.7523.0523.0537.1937.1951.3451.34

10.2910.2912.8514.1514.1528.2928.2942.4442.44

8.318.318.908.908.908.908.908.908.90

Push Type – Spark and Corrosion Resistant Models

CatalogNumber

Capacity(tons)

NetWt.(lbs) Price


Load & Hand Chain

Load ChainOnly


of Drop


¼½1

1½23456

4242

60-1/298-1/298-1/2

150250-1/2

280281

349334933982484049256251638884888529

79.4579.4568.1891.9091.90164.54164.54237.17237.17

48.9148.9148.9172.6372.63145.27145.27217.90217.90

30.5430.5419.2719.2719.2719.2719.2719.2719.27

41

Series USA Army TypeTrolley Hoists

Series USA Army-Type Trolley Hoists - Metric Rated Except for Spark Resistant ModelsCapacities ¼ to 6 Tons

Note: When ordering give catalog Number, capacity and length of lift for hoist that is to be used on. Apply to factory for longer lifts.* Trolley mounted hoists only.

Chain ContainersFor USA Hoists - Standard For USA Hoists - Spark Resistant

Series USA Army Type Trolley Hoists Only

Standard lift is 8'-0" standard hand chain drop is approximate 1½ ft. above fully extended load hook.

BUDGIT®

Note: If trolley drop stops are needed, please use pricing for heavy duty trolleys listed on page 18.

Trolleys included as standard for 1-3 ton capacities do not have drop stops as an option. To price for drop stops, use lug mounted hoist price and add price of heavy duty rigid mount trolleys listed on page 18 and include drop stop adder.

Hand-Geared Type – Standard Models

CatalogNumber

Capacity(tons)

NetWt.(lbs) Price


Load & Hand Chain

Load ChainOnly

Hand Chain Only Per Foot of Drop

83218322832383248325832683278328

½1

1½23456

6776-1/2

112-1/2112-1/2

165265-1/2

295296

16581778210121822989342446334663

26.9130.6531.9531.9546.0946.0960.2460.24

10.2912.8514.1514.1528.2928.2942.4442.44

16.6217.8017.8017.8017.8017.8017.8017.80

Hand-Geared Type – Spark & Corrosion Resistant Models

CatalogNumber

Capacity(tons)

NetWt.(lbs) Price


Load & Hand Chain

Load ChainOnly

Hand Chain Only Per Foot of Drop

8321SR8322SR8323SR8324SR8325SR8326SR8327SR8328SR

½1

1½23456

6776-1/2

112-1/2112-1/2

165265-1/2

295296

46945218461847036839697593189359

110.0087.45111.17111.17183.81183.81256.44256.44

48.9148.9172.6372.63145.27145.27217.90217.90

61.0938.5438.5438.5438.5438.5438.5438.54

CatalogNumber

Net.Wt.(lbs)

Max. Lift in ft. Container Will Accommodate

PriceCatalogNumber

Net.Wt.(lbs)

Max. Lift in ft. Container Will Accommodate

Price¼ & ½

Ton1

Ton1½ & 2

Ton3 & 4Ton

5 & 6Ton

¼ & ½Ton

1Ton

1½ & 2Ton

3 & 4Ton

5 & 6Ton

902741902742902743902744902745902750902751902752902753902754

58

1015209

14203640

1525405575–––––

1020304565–––––

–––––

1530406690

–––––815203345

––––––

10132330

104144176345523137146380400650

902759902760902761902765902766902767902768902762

444326-21

581091420222222

152540––––

55–

102030––––

45–

–––

15304065–

90

–––8152032–

45

––––

101321–

30

422427504427504605648597712

Beam Flange Adjustment

Capacity(tons)

Standard FlangeAdjustment

(in)

Extended Adjustment - With Add to Standard Patented Track Add to Stan-dard

1st ExtensionFlange Adjustment

(in) Price

2nd ExtensionFlange Adjustment

(in) PriceFlange Adjustment

(in) Price

1/4 — 1/21

1-1/2 — 234

5 — 6

2-5/8 — 4-5/83 — 5

3-3/8 — 63-3/8 — 64 — 6-1/44 — 6-1/4

5-1/4 — 7-3/85-1/4 — 7-3/86-1/4 — 8-7/86-1/8 — 8-7/86-3/8 — 8-5/86-3/8 — 8-5/8

133

——

9 — 119 — 11

8-3/4 — 118-3/4 — 11

——

197197197197

3-1/4 — 4-1/16

298312375375375375

42

Chain Hoist & TrolleyAccessories

Load Chain OptionSpecify for plated load chain in Hand Chain Hoists

Hand Chain OptionsThe hand chain on all BUDGIT products of standard design is zinc-plated hand chain. Plated hand chain provides a corrosion-resistant finish for outdoor and other corrosive applications and reduces friction against the walls of the chain guide. Less effort is required to raise and lower loads.The hand chain on the BUDGIT Series USA Spark Resistant "SR" ¼ and ½ ton models is Everdur Bronze while all other BUDGIT Spark Resistant "SR" hoists and geared trolleys have aluminum hand chain.Bronze hand chain is a spark and corrosion-resistant material providing greater protection for the more corrosive and hazardous atmospheres.It can be added to standard BUDGIT hand chain hoists and trolleys. Add to the hoist as follows:

When ordering longer than standard chain drop, include both price for standard drop and price for each additional foot of drop.For bronze or spark resistant hand chain on Steel Frame hoists and Low Headroom hoists as well as Cast Iron Wheel Model P geared trolleys, apply to factory.

Notice: MILITARY SPECIFICATIONS - BUDGIT Aluminum Chain Blocks and Track Clamps are on the Qualified Products List QPL-904 for military specifications. Contact factory for prices and delivery. FURNISH COMPLETE ORDERING DATA REQUIREMENTS.

Track ClampsNote: When ordering, give complete I-beam dimensions and include Trolley Hoist Catalog Number, capacity and length of lift.

*Above price for clamp with connecting bar for use with BUDGIT Aluminum Army Type Trolley Hoists. Apply to factory for other applications.For longer than standard 5' - 0" hand chain drop, add $8.34 per ft.

Hand Operated Hoists Bullard Hook Price Additions

Carrying Case for USA Hoists

Eye Bolt Suspension

Budgit USA

Only

BUDGIT®

DescriptionPriceAdd

Special Finish — Plating, Coating or Paint 655

Stainless Steel I.D. Tags 129

Rigid Mount To Hook Suspension Adapter, for Attachment of Hook Suspension Hoist to Rigid Mount Trolley

1 Ton, Catalog No. 900791, 4-1/3" Headroom*2 Ton, Catalog No. 900792, 4-3/4" Headroom*3 Ton, Catalog No. 900793, 5-3/8" Headroom*

266320347

Mag Partical Test - per hook 230

*Headroom measurement is from Beam to Saddle

DescriptionPriceAdd

BUDGIT Aluminum Hand Chain Hoist - 1/4 thru 2 Ton..BUDGIT Steel Frame Chain Hoist — 1/4 thru 2 Ton......

11592

Catalog No. Price

98................................................................... 106

Capacity(tons)

Bronze HandChain Adder

Price Per FtOf Drop

¼ & ½1 – 1½ & 21 Thru 12

add to plated steeladd to aluminum

add to plated steel

23.8223.8236.72

Bullard Hook For:

Price Add

Upper Lower

BUDGIT Hand Chain Hoist

1/4 and 1/2 Ton.......................................1 Ton.......................................................2 Ton.......................................................3 Ton.......................................................4 Ton.......................................................5 Ton.......................................................6 Ton.......................................................

184184200200524628712

127127172200524628712

BUDGIT Steel Frame Chain Hoist Apply to Factory

Catalog Number Description Price

51547201 For Aluminum Frame Chain Hoists*.............. 2461

Note: Spark resistant bullard hooks not available.

43

Steel Frame Hand Chain Hoists

Load Lifter Hand Chain Hoists SERIES 622 (Bulletin #LT/BC-H3004-0802)*

*Prices are FOB Wadesboro, North Carolina

BUDGIT®

Model AM Army Type Trolley Hoists Unit price each with lift shown*

Wide flange beam operation withinthe standard beam range .................... No Charge - the exact beam must be provided.

Wide flange operation beyond themaximum flange widths ............................................................ P.O.A.

Patented track operation within the standardbeam flange (straight track only) .........................Add:

Plain Geared 1/2 and 1 Ton $104.00 $137.30 2 Ton 149.80 197.60 3 Ton 186.20 236.10 5 Ton 260.00 267.30

Model AM Army Type Options

AM Army Types are designed for straight-track operation.

Chain Containers ....................................................................... P.O.A. (not available on all models)

Zinc plated load chain .............................................Add:

1/2 and 1 Ton............................................................ 1.40/foot of lift 2 Ton ......................................................................... 2.30/foot of lift 3 Ton ......................................................................... 3.30/foot of lift 5 Ton ......................................................................... 4.40/foot of lift

Zinc plated hand chain ............................................Add:

Plain Trolley ......................................................... 1.00/foot of drop Geared Trolley .......................................................1.70/foot of drop

Overload Limiter .......................................................................120.70

Drop Stops ....................................................................................200

Note: Maximum available lift is 30 feet. * Prices are FOB Lisbon, Ohio

PLAIN TROLLEY MODEL

CatalogNumber

Capacity(tons)

Standard Flange Width Range (in)

Unit Price Each

10' 15' 20' 25' 30'

913614 1/4 2-5/8 - 4-5/8 716.60 766.30 816.00 865.70 915.50

913615 1/2 2-5/8 - 4-5/8 716.60 766.30 816.00 865.70 915.50

913616 1 2-5/8 - 4-5/8 769.00 818.70 868.40 918.20 967.90

913617 2 3 - 5-1/2 1047.40 1110.40 1173.30 1236.20 1299.10

913618 3 3-3/8 - 6 1420.70 1489.30 1558.00 1626.60 1695.20

913619 5 4 - 6-1/4 2532.40 2622.90 2713.40 2803.90 2894.40

GEARED TROLLEY MODEL

913622 1/4 2-5/8 - 4-5/8 942.20 1030.90 1119.50 1208.20 1296.90

913623 1/2 2-5/8 - 4-5/8 942.20 1030.90 1119.50 1208.20 1296.90

913624 1 2-5/8 - 4-5/8 999.40 1088.10 1176.80 1264.90 1354.20

913625 2 3 - 5-1/2 1304.00 1372.10 1440.30 1508.00 1576.70

913626 3 3-3/8 - 6 1722.10 1788.80 1855.40 1922.10 1989.50

913627 5 4 - 6-1/4 2891.70 2991.70 3091.70 3191.60 3291.60

CatalogNumber

Capacity(tons)

Lift(ft)

Weight(lbs) Price

Extra Lift Per Foot #

Hand Chain Only

Hand and Load Chain

Load ChainOnly

9221101/2

8 15 96.40 10.80 5.41

5.40

922111 12 19 139.60 10.80 5.41

9221121

8 22 108.30 12.35 6.95

922113 12 26 157.70 12.35 6.95

9221142

8 53 231.90 19.55 14.14

922115 12 61 310.10 19.55 14.14

922116 3 8 69 263.60 33.70 28.28

922117 5 8 74 682.60 33.70 28.28

922118 10 8 139 1777.10 61.95 56.56

44

TUGIT® Lever Operated Hoists

Series 602 Lever Hoist

Nylon Carrying Bag Catalog Number 0217 .................... $18

Prices are FOB Wadesboro, North Carolina

Series 603 Lever Hoist

Nylon Carrying Bag Catalog Number 0212 .................... $17

Prices are FOB Wadesboro, North Carolina

Lever Operated Hoist Series 653 Shipyard Hooks for Series 653

MaximumCapacity

(tons)Upper Hook

PriceLower Hook

Price

1½ 75 75

3 99 99

CatalogNum-ber

Capacity(lbs)

MaxLift(ft)

Net Wt.(lbs) Price

0210 550 5 6 136

0214 550 10 7 173

CatalogNum-ber

Capacity(lbs)

MaxLift(ft)

Net Wt.(lbs) Price

0215 1100 5 7 181

0216 1100 10 8 226

CatalogNumber

Max.Cap

(tons)

Std.Lift(ft)

Ship Wt.(lbs) Price

ExtraLift

Per ft.

5310

3/4

5 19 231.00

6.95

5311 10 21 265.75

5312 15 26 300.50

5313 20 28 335.25

5328 1 5 19 260.00

5315

1-1/2

5 31 300.00

8.45

5316 10 36 342.25

5317 15 41 384.50

5318 20 45 426.75

5329 2 5 31 419.00

53203

5 51 482.0014.14

5321 10 59 552.70

5330 6 5 78 884.0028.28

5331 6 10 94 969.00

45

"Z" Hoist Program

GeneralFor the Prompt delivery of hoists with custom length lifts from distributor inventory, the "Z" hoist program offers the following:

1. The availability of BUDGIT Hand Chain Hoists without load chain.

2. The availability of load and hand chain in bulk lengths.

3. Eliminating the return of standard length load chain to the factory, saving the distributor the freight and handling expense.

ObjectiveThe objective of the program is to increase the flexibility of our distributor stocks and create added sales by providing off-the-shelf delivery by developing the capability of our distributors to provide long lift hoists. The "Z" hoist program is designed to supplement a responsible distributor's inventory by shipping the popular model BUDGIT electric chain hoists. The hand chain hoists have standard hand chains installed and the electric chain hoists will have the standard pendant drops installed. The BUDGIT hoists will be identified with the suffix "Z" when it is to be shipped less load chain.

How the "Z" Hoist helps the distributor1. The distributor can order one or more "Z" hoists in the popular capacity models, as listed on pages 57 through 58 and have an unchained hoist in stock ready for immediate installation of long length chains.

How the "Z" Hoist Program Works1. How to Order: All orders for prepackaged chain should be sent the normal way through the Customer Service Department. Order by catalog number as shown on pages 57-58.

A. Electric and Hand Chain Hoists: Use the regular catalog numbers, except add the final suffix "Z". The suffix "Z" will always indicate that the hoist has no load chain but will have the standard pendant drop or standard length hand chain drop installed.

2. What Hoists Should Distributors Stock:A. Standard BUDGIT Electric Chain Hoists in capacities 1/2 through 3 ton.

B. Standard BUDGIT Hand Chain Hoists in capacities 1/2 through 6 ton, hook suspension models only.

It is not the purpose of the program to have the distributor stock only one or two standard length hoists or only "Z" hoists. As in the past, based on historical sales records of hoists, various lengths should continue to be stocked, since the lowest cost to the distributor is to ship from the shelf without opening the box.

Different ways that long lift hoist can be obtained1. Hoists may continue to be ordered with long lifts from the factory.

2. Run bulk chain into stock or "Z" hoists to obtain desired chain lengths.

3. Distributors requiring long lifts, in short lead time situation and who do not have bulk packaged chain, may order chain in less than the package lengths from their local service station at the suggested discount of 10% for load chain and 15% for hand chain lengths.

Chain Reeving of "Z" Model HoistsRefer to reeving instruction manuals for proper information for preparing and cutting load chain and instructions for reeving load chain into various models and capacities of your "Z" Model hoists. The instructions for modifying load chain length on chain blocks are also provided. For reeving instructions, consult the following:

Instruction No. 113534-72 Reeving Instructions BUDGIT Hand Chain Hoists.

O & M Manual 113535-12 BUDGIT Manguard Electric Hoist

Testing the "Z" Model HoistThe various component parts of "Z" model hoists have all been pretested. The hoist was tested complete at factory before chain and lower block removal for shipment. All factory supplied chain has been proof tested. Therefore, proper assembly only need be checked and proper hoist operation observed after reeving by using a test load of 50 pounds or more per part of chain.

Direct any questions concerning this program to your local field representative, who is always available for help.

Hoists without Load ChainBudgit Electric Chain HoistsBudgit Hand Chain Hoists

BUDGIT®

46

Hoist Catalog NumberAnd Capacity Description

IdentifyingSymbols

Identifying Symbols

Effective 7/1/96

1/4 and 1/2 Ton BUDGIT Electric and all BUDGIT 2000 Series Air Hoists

Alloy Link Chain Natural Color 1/4" Bar Diameter or

1, 2 , 3 and 5 Ton BUDGIT Electric Hoists and Series 6000 Air Hoists

Alloy Link Chain Natural Color 5/16" Bar Diameter or

1/4 and 1/2 Ton BUDGIT Electric Hoists and 1/4, 1/2 and 1 Ton BUDGIT Air Hoists

5/8 Pitch, RC625 Riveted Hoist Roller Chain Including Four (4) Riveted Connecting Links

RC-625or

625

RC-625or

625

1 and 2 Ton BUDGIT Electric Hoists3/4 Pitch, H6 Riveted Hoist Roller Chain Including Four (4) Riveted Connecting Links

H-750or

H-6

H-750or

H-6

Budgit Hand Chain Hoists

Catalog 8260 (1/4 Ton), & 8261 (1/2 Ton) Alloy Link Chain Natural Color — 1/4" Bar Diameter

Catalog 8262 (1 Ton)Alloy Link Chain Natural Color — 9/32" Bar Diameter

or

Catalog 8259 (1-1/2 Ton), & 8263 (2 Ton) (Also fits 1-1/2 — 10 Ton Models)

Alloy Link Chain Natural Color — 3/8" Bar Diameter or

Tugit Lever Operated HoistsNOTE: Identification markings appear

on links (every 12-18 inches)as per example at right

Catalog 234 (3/4 Ton) Alloy Link Chain Natural Color — 1/4" Bar Diameter

Catalog 230 (1 Ton), 245 (1-1/2 Ton, & 240 (2 Ton)

Alloy Link Chain Natural Color — 9/32" Bar Diameter

or

Catalog 291 (1-1/2 Ton, 292 (3 Ton), 293 (1-1/2 — 3 Ton), (4-1/2 Ton) & 295 (6 Ton)

Alloy Link Chain Natural Color — 5/16" Bar Diameter

or

or

w

w

w

H

BUDGIT® "Z" Hoist Program Load Chain

Identification Markings

Electric Hoists and Air Hoists

H

H

LTI

LTI

LTI

LTI

LTI

LTI

LTI

LTI

LTI

47

Catalog Number

Capacity (tons)

Price"Z" Model

ChainSize Di-ameter

(in)

Standard Lifts Special Lifts

Lift(ft)

ExactChain Length

TotalChain Price

Multiply

Length of ChainChain PricePer Lineal ft

USA

8260Z 1/4 654.741/4

8

9' - 0"

101.48

Lift + 1'

10.73

8261Z 1/2 654.74 101.48 10.73

8262Z 1 767.51 9/32 126.83 13.44

8259Z 1-1/2 1066.52

3/8

9' - 1-1/2"141.48

Lift + 1' - 1-1/2" *14.77

8263Z 2 1210.55 141.48 14.77

8264Z 3 1597.6317' - 9"

275.18Lift x 2 Plus 1' - 9" *

14.77

8265Z 4 1977.01 275.18 14.77

8266Z 5 2257.6626' - 4"

407.73Lift x 3 Plus 2' - 4" *

14.77

8267Z 6 2273.47 407.73 14.77

"Z" Program Hand Chain Hoists1/4 - 6 Ton Capacities

Note: All "Z" model BUDGIT Hand Chain Hoists, although shipped less load chain, are equipped with standard length hand chain for 8'-0" lift. Add two lineal feet of hand chain for each foot of drop over the standard for 8'-0" lift. Hand chain price is $8.80 per ft. of drop on 1/4 and 1/2 Ton and $9.43 per ft. of drop on 1 through 10 ton.

EXAMPLE: Wanted a 3-Ton Catalog 8264Z Chain Block with 20' lift.1. Load Chain = [(20' lift x 2) + 1'-9"] x $14.77 41'-9" x $14.77 = $616.65 * 1'-1/2" = 1.125 ft.2. Hand Chain = (20'-0" - 8'-0") x $9.17 = 12' x $9.17 = 110.04 1'-9" = 1.75 ft.3. 8264Z Hoist = 1597.63 2'-4" = 2.33 ft. 2'-10" = 2.83 ft.Catalog 8264Z Chain Hoist 20'-0" Lift $2324.32 3'-9" = 3.75 ft.

Model "Z" Hand Chain Hoist Catalog Numbers, Chain Data and Pricing

BUDGIT®

Contact your district sales manager for new Model "Z" Electric Chain Hoist Program

"Z" Program Electric Chain Hoists1/4 - 3 Ton Capacities

48

Catalog NumberBudgit

Part Number Zinc Plated910102 203992-4

—910112 204013-1

910121 & 910122 209159-1 209159-3

910131 & 910132 200626-1 200626-3

910151 & 910152 200656-1 200656-3

910141 & 910142 209156-1 209156-3

910125 & 910126 208778-1 208778-3

910172 No 896

910183 No 901

Hand Chain Hoists - Hand Chain

CatalogNumber

Capacity(tons) Description

Feet of ChainIn Package

Wt(lbs)

CatalogNumber Price

8260 & 8261260 & 261

¼ - ½ Hand Chain 1/0-3/0 Plated200' with 10 Everdur

Connecting Links85 910102 855.82

8262-8263264-269

1 - 10 Hand Chain 15/64 Plated200' with 10 Everdur

Connecting Links100 910112 917.02

360 - 3694301 - 4323913630 - 913645

¼ - 10Hand Chain 15/64 Natural Color 250' 116 85927 1473.12

Hand Chain 15/64 Natural Color 500' 228 85006 2946.24

Hand Chain Hoists - Load Chain

USA Spark Resistant 1 - 6 Hand Chain Stainless Steel 200' 88 C93755 4301.49

8260 & 8261 ¼ - ½Alloy Link Chain Natural Color1/4" Bar Diameter

150' 90 910121 1589.18

300' 180 910122 3178.35

8262 1Alloy Link Chain Natural Color9/32" Bar Diameter

150' 120 910131 1986.47

300' 240 910132 3972.96

8259 & 8263Hoist fits models

1½ - 10

Alloy Link Chain Natural Color3/8" Bar Diameter Alloy Link Chain Natural Color1/4" Bar Diameter

150' 200 910151 2186.00

300' 395 910152 4372.00

360 - 3614301 - 4302/4311 - 4312913630375, 334 Lever Hoist

¼ - ½¼ - ½¼ - ½

¾

Alloy Link Chain Natural Color1/4" Bar Diameter

250' 152 85928 3113.98

500' 304 85007 6227.96

362, 4303, 4315913631

1Alloy Link Chain Natural Color9/32" Bar Diameter

200' 183 85930 3004.72

500' 458 85008 7511.80

359 - 3694300 - 4323913632 - 913645

1½ - 101 - 121½ - 6

Alloy Link Chain Natural Color3/8" Bar Diameter

200' 274 85932 3408.98

500' 688 85010 8522.47

Tugit Lever Operated Hoists

234 ¾Alloy Link Chain Natural Color1/4" Bar Diameter

150' 90 910121 1589.18

300' 180 910122 3178.35

230, 245 & 240 1, 1½ & 2Alloy Link Chain Natural Color9/32" Bar Diameter

150' 120 910131 1986.47

300' 240 910132 3972.96

291, 292, 293, 294 & 295 1½, 3, 4½, & 6Alloy Link Chain Natural Color5/16" Bar Diameter

150' 145 910141 2729.38

300' 285 910142 5458.75

All TUGITSEnd Rings to install in chains cut and installed from bulk chain

Box 24 10 910161 47.68

Tugit2 Lever Operated Hoists

345, 342, 391, 392 & 395 1½ - 6Alloy Link Chain Natural Color5/16" Bar Diameter

200' 190 85931 3430.84

500' 439 85009 8577.10

BUDGIT® "Z" Program Packaged Chain

Load & Hand Chain

Bulk Chain Part Number Cross Reference

All Tugit2 and Hi-Cap2 Bulk Chain are FOB Lexington, TN

49

CatalogNumber

Capacity(tons) Description

Wire Dia.(in)

Length Per Drum(ft)

Weight(lbs) Price

922138 1/4 - 1/2

Load Chain

.197

250

90 1888.36

922135 1 .236 143 2189.16

922136 1-1/2 - 10 .394 305 3592.21

GHH5009J 1/4 - 10 Hand Chain .192 83 919.10

Tugit Lever Chain Hoists Series 653*85002 3/4 - 1

Load Chain

.236 250 143 2226.22

85029 1-1/2 - 2 .312 200 176 2917.30

85003 3 - 6 .394 200 305 2917.30


WeightLbs Price

1200 Hydraulic - Hand Operated 496 9792

Hoist Catalog NumberAnd Capacity Description

Feet of ChainIn Package

Wt.(lbs)

CatalogNumber Price

1/4 and 1/2 TonBUDGIT Electric and BUDGIT Series 2000 Air hoists

Alloy Link Chain Natural Color 150' 95 910125 2150.28

1/4" Bar Diameter 300' 185 910126 4299.47

1, 2 & 3 Ton BUDGIT Electric & Series 6000 Air Hoist

Alloy Link Natural Color 150' 145 910141 2729.38

5/16" Bar Diameter 300' 285 910142 5458.75

1/4 and 1/2 TonBUDGIT Electric 1/4, 1/2 and1 Ton BUDGIT Air Series 2000

5/8 Pitch, RC625 Riveted Hoist Roller Chain including four (4) Riveted Connecting LinksRC625 Riveted LinkRC625 Spring End Link

50' 40 910172 1391.46

Box of 242 910201 118.00

2 910205 118.00

1 and 2 Ton BUDGITElectric Hoist

3/4 Pitch, H6 Riveted Hoist Roller Chain In-cluding four (4) Riveted Connecting Links H6 Riveted Link H6 Spring End Link

50' 60 910183 1556.99

Box of 242 910202 118.00

2 910206 118.00

1, 2, 3 & 5 ton BUDGIT Electric Chain Hoists Pendant cable for single speed electric hoists 500' 86 931210 1460.64

BUDGIT®

* Prices are FOB Wadesboro, North Carolina

† Prices are FOB Lisbon, Ohio

Value Priced Test Stand †

"Z" Program Packaged ChainLoad & Hand Chain

Electric or Air Hoist - Load Chain

Bulk Chain*Load Lifter Hand Chain Hoists Series 622

Plated Link Load Chain available in bulk - Consult Factory

50

Clearance Diagrams

Standard Clearance Diagrams ............................................................................................................................................No Charge

Standard clearance diagrams apply to cataloged models in the Budgit price book not including optional features or accessories.

Clearance Diagrams for Engineered Products ................................................................................................................... 56.00 Net

Clearance diagrams which require additional labeling including specific lifts, optional or special features, customer name, order number, etc. that are not included in the standard drawings. The diagrams will be a unique drawing for each hoist, trolley and chain container combination. Drawings will show general configuration of overall dimensions. They will be done in CAD and provided on an 8½ x 11" bond paper, which is suitable for reproduction on any standard copy machine, so there is no need for reproducibles, such as sepias or mylars.

Wiring Diagrams ..................................................................................................................................................................No Charge

Wiring diagrams will be our standard printed format, as provided in our instruction manuals.

Instruction and Parts ManualsCMCO will provide up to three manuals, if requested for each product type on an order at no charge. Additional manuals will be provided for the following charges:

Powered Products ................................................................................................................................................................ 10.03 Net

BUDGIT Electric Hoists BUDGIT Air Chain Hoists BUDGIT Motor Driven Trolleys BUDGIT Air Motor Driven Trolleys

Bridge Crane Components ................................................................................................................................................. 10.03 Net

Top Running & Underhung, Single Girder Bridge Crane Kits, Push, Hand Geared or, Motor Driven

Manual Products ................................................................................................................................................................. 10.03 Net

*BUDGIT Hand Chain Hoists BUDGIT Push & Hand Geared Trolleys TUGIT Lever Operated Chain Hoists All Chain Containers * USA Army Type Hoists require 2 manuals (hoist and trolley)

Load Test Certification (must ask for at time of order) ........................................................................................................No Charge

CMCO will perform and certify its standard load tests for hoists. Testing will be in accordance with ANSI B30.16.

Hook Gage Marks ................................................................................................................................................................ 105.55 Net

Damascus Manuals ............................................................................................................................................................. 10.03 Net

Clearance Diagrams and Parts & Service Manuals are available online at www.cmworks.com

BUDGIT®

51

BUDGIT®

Checklist for Manual Chain HoistHoist Model NumberLift Requirements – 8' Standard *Hand Chain Drop – 6' - 6" StandardSuspension – Hook Lug – Plain Trolley Handgeared Trolley – Standard Hand Chain Drop is 6' - 6"

Spark & Corrosion ResistantPlated Load ChainChain BucketOverload Device (Standard on USA Models)

* On higher capacity long lift hoists take note on the hand chain overhaul in feet to lift load one foot.

Checklist for Lever HoistHoist Model NumberLift Requirements – 4' - 6" StandardPlated Load ChainOverload Device – Redline Model "R" is in front of the Catalog Number

Checklist for Manual TrolleysTrolley Model NumberSuspension – Hook Type Lug – Plain Trolley Handgeared Trolley – Standard Hand Chain Drop is 9' - 6"

Spark Resistant Features (if required)Beam size Trolley is to run on Straight Monorail or Curve (Radius Requirements Needed)

Checklist for Electric Chain HoistHoist Model NumberLift Requirements – Maximum Recommended Lift (7 x Lift Speed)Electric Hoists with lifts over 90', a lug mounted trolley is recommendedLift Speed – Single or Two SpeedSuspension – Hook Lug – For Plain or Handgeared Trolley Lug – For Motor Driven TrolleyVoltage – Need to Specify for Two SpeedIndoor Service – StandardOutdoor Service – Weatherproofing Adder (includes plated chain) or CoverPendant Drop – If other than Standard Lift on Hook Mount, Lug Suspension for Plain & Handgeared Trolleys. Hoists with Motorized Trolleys, the Pendant Cable is Added to the Trolley, instead of the Hoist. See Trolley Options.Type of Trolley – Check Beam Size and Radius Requirements (if any) Plain Handgeared – Standard Hand Chain Drop is 9' - 6" Motorized – Standard Pushbutton Drop is 7' Indoor – Standard Outdoor – NEMA 3R, NEMA 4Recommended Adders – Mainline Disconnect panel for Monorail Hoist.Two speed Hoist require a different trolley from a Single Speed Hoist. When ordering for a Bridge Crane you will need fusing, and Extra Pushbuttons to operate the Crane if the Pushbutton is from the Hoist.

Pushbutton deduct is for the hoist with Motorized Trolley only.Chain BucketElectrification for Monorail Hoist Cord Reel Retractile Cord Festooned Conductor System C-track Supported Festooned Conductor System Wire rope Supported Conductor Kits figure 8 Bar Spring type Slide Collectors Required, Collector Pole & Bracket Required on Trolley.

Hoist & ComponentChecklists

52

BUDGIT®

Checklist for Air Chain HoistsHoist Model NumberLift Requirements – 10' Standard – Maximum lift of 6000 Series Air Hoist is (7 x Lift Speed)Air chain Hoists with lifts over 90', a lug mounted hoist is recommended.Lift SpeedSuspension – Check Beam Size and Radius Requirements (if any) Hook Lug – Handgeared – 9' - 6" Standard Hand Chain Drop Push Type Air Motor Driven TrolleyPull Cord Drop – Included in Additional Lift PricePendant Drop – 6' Standard 2200 Series – Maximum Pendant Drop 72' 6000 Series – Maximum Pendant Drop 36'Spark Resistant FeaturesPlated Load Chain OptionAir Motor Driven Trolley – Check Beam Size and Radius Requirements (if any) Standard Pendant Drop is 6' Maximum Pendant Drop is 36' Spark Resistant FeaturesChain BucketAir Supply Hose Air Hose Trolleys Wire Rope Festoon SystemFilter – RecommendedLubricator – RecommendedRegulator – Recommended if air Supply is over 90 PSIRecoil Air Hose Nylon coated Cable Recommended

Checklist for Electric Bridge CranesEnd Trucks – Check runway beam size for underhung bridgesGear ReducerMotorControls – Indoor – Standard Outdoor – NEMA 3R NEMA 4/12 NEMA 4X and 7 available upon requestFused Disconnect Switch – Indoor – Standard Outdoor – NEMA 3R, NEMA 4/12, NEMA 4X and 7 available upon requestCross Shaft SupportCross Shaft CouplingBumpersBridge ElectrificationRunway ElectrificationCollector Pole & BracketMain CollectorsSome Recommended Optional Equipment Electronic Acceleration Control Bridge Brake

Items needed to be added to Electric Hoist for Electric Bridge Crane

FusesExtra Pushbuttons to Operate Bridge Crane (4 additional buttons needed)Tow Arm – Use Catalog Number 931103115 Control voltage on Hoist

Hoist & ComponentChecklists

53

BUDGIT®

HoistCapacity

Lift

Lift Speed

Voltage or Air Supply

Headroom Requirements

Type of Suspension

Lug Hook

Spark Resistance (Air/Manual only)

OptionsWeatherproofing

Plated Load Chain

Chain Bucket

Monorail Electrification

Air Host

Filter & Lubricator

Special Paint

TrolleyType of Trolley

Plain

Handgeared

Motorized

Voltage or Air Supply

Pendant Drop

Trolley Speed

Spark Resistance (Air/Manual only)

Beam Size to Run on Beam Radius

Options2 Speed

Trolley Brake

Weatherproofing

Ballast Resistors

Electronic Acceleration Control

Extra Pushbuttons

Extra Hand Chain Drop

Wide Flange Adjustment

Collector Pole & Bracket

Collectors

Trolley Locking Clamp

Special Paint

Fuses

Mainline Disconnect Panel

Hoist and CraneSpecification sheets

54

BUDGIT® Hoist and Crane

Specification sheets

Bridge CraneCapacity (5 ton Max.)

Span (36' - 0" Max.)

Top-Running Runway Rail to Run on

Underhung Beam to Run on

Bridge Movement

Push Pull

Handgeared

Hand Chain Drop

Motorized

Bridge Speed

Voltage

Control Enclosure (NEMA 1 Standard)

Disconnect Enclosure (NEMA 1 Standard)

Bridge Electrification

Runway Electrification

Runway Length

Pushbutton From Hoist (Extra Pushbuttons Required)

Hoist for BridgeCapacity

Lift

Headroom Requirements

Lift Speed

Voltage

Trolley Type

Plain

Handgeared

Motorized

Trolley Speed

See Hoist Specification Sheet for Hoist & Trolley Options.

Bridge Components OptionsElectronic Acceleration Control

2 Speed Motors & Controls

Ballast Resistors

Bridge Brake

Motor Protection

Weatherproofing

Main Collector

Wide Flange Adjustment

Notes

Documents

Budgit Hoist Pricebook - Grúa viajera