Upload
ramana-katragadda
View
225
Download
5
Embed Size (px)
DESCRIPTION
Hydraulic Camshafts
Citation preview
11For technical support call 619-661-6477 or visit www.crower.com
http://www.crower.com/catalog/page-11.html
BuickHYDRAULIC FLAT TAPPET
Note: Crower has an extensive inventory of Buick V6 cam profiles and roller lifters that were designed for the Buick V6 Indy turbo engines.
Spring pressure:68301X1-12 Seat: 1.700" @ 101 lbs / Nose: 1.250" @ 274 lbs / Coil bind: 1.130"
Note: If exceeding 6500 rpm, high pressure springs and titanium retainers may be required. See spring and retainer specs or contact Crower for proper recommendations.Valve timing events are available online at: www.crower.com
Note: Custom ground turbocharged/supercharged camshafts are available from Crower on a special order basis.
Buick GN 231 c.i. 6 cyl. 1977 ½ - 1987, 1988 - 1989 AMC
Note: Early 198-225 cid 1962-1967 Odd Fire cam cores are available from Crower. Specify when ordering. Note: These cams use .000" intake and exhaust valve lash.
ENGINEERED COMPONENT KITS
8405384053X38425584255X980
68301X1-1268301X1-1268301X1-1268301X1-12
86032-1286032-1286032-1286032-12
Hydraulic Lifter.CamSaver Hydraulic Lifter.Solid Lifter.CoolFace Solid Lifter.
66050-1266050X3-1266900-1266900X980-12
Lifters Springs Retainers RemarksPart No.
All previous part numbers no longer listed are still available as custom grinds. Please contact Crower for more custom grinds.
Your RPM range will vary depending on yourCylinder Head Air Flow Data & Cubic Inches.
Crower Recommends ZDDPlus for all Flat Tappet CamsZDDPlus™ contains 42,700 ppm of phosphorus and 57,300 ppm of zinc. When a 4-ounce bottle of ZDDPlus™ is added to 5 quarts of oil, it is diluted 41:1, which contributes 1047 ppm of phosphorus and 1397ppm of zinc to whatever the oil may or may not already contain.Part #86092 - 4oz Bottle of ZDDPlus & Paste
MECHANICAL FLAT TAPPET
1978-1986 196 (3.2L) 231 (3.8L) 252 (4.1L) V6 Evenfire
BAJA BEAST / PERFORMANCE LEVEL 2Good hot street cam with emphasis on upper bottom to top end power.RPM Power Range: 1800 to 4500 / Redline: 6000 Plus.
54915 ALLCID
280HDP 112° 280° 290° 204° 214° .450" .474" 84053X3
ULTRA PERFORMANCE COMPU-PRO / PERFORMANCE LEVEL 3Street/strip cam with strong mid to top end torque and horsepower.RPM Power Range: 2000 to 6000 / Redline: 6500 Plus.
54245 ALLCID
278HDP 112° 278° 284° 212° 218° .462" .478" 84053X3
CUSTOM GROUND HYDRAULICSpecial order hydraulic lifter camshaft ground to your specifications. Call with all engine data incl. head flow data, valve sizes, operating power range, etc when ordering.
00154H ALLCID
SuitableComponent
Kit
Gross Lift1.6 / 1.6
Intake Exhaust
Duration @ .050"
Intake Exhaust
Advertised Duration
Intake ExhaustLobe
CenterPart
NumberDescription(Note: See pages 6-7 for a detailed explanation of each Performance Level)
C.I.D.Group Grind
SuitableComponent
Kit
Gross Lift1.6 / 1.6
Intake Exhaust
Duration @ .050"
Intake Exhaust
Advertised Duration
Intake ExhaustLobe
CenterPart
NumberDescription(Note: See pages 6-7 for a detailed explanation of each Performance Level)
C.I.D.Group Grind
Refer to www.crower.com for camshaftrecommendation
CUSTOM GROUND SOLIDSpecial order solid lifter camshaft ground to your specifications. Call with all engine data including head flow data, valve sizes, operating power range, etc when ordering.
00154M 196231252
Refer to www.crower.com for camshaftrecommendation
12 For technical support call 619-661-6477 or visit www.crower.com
http://www.crower.com/catalog/page-12.html
50229
50230
50231
50232
50233
50234
00151H
84150
84150
84150
84150
84150
84150
258HDP
260HDP
270HDP
276HDP
280HDP
284HDP
112°
112°
112°
112°
112°
112°
260°
266°
276°
281°
286°
290°
258°
260°
270°
276°
280°
284°
300
340
300
340
300
340
ALLCID
POWER COMPU-PRO / PERFORMANCE LEVEL 2Perfect combination of power and mileage with extended rpm range. Strong low end and mid-range power for spirited driving on or off the road. RPM Power Range: 1500 to 4000 / Redline: 5500 Plus.
HIGH PERFORMANCE COMPU-PRO / PERFORMANCE LEVEL 3These cams offer extended rpm range with emphasis on upper bottom and top end power.RPM Power Range: 1800 to 4500 / Redline: 6000 Plus.
ULTRA PERFORMANCE COMPU-PRO / PERFORMANCE LEVEL 4 These cams exhibit strong mid-range and top end torque and horsepower.RPM Power Range: 2000 to 6000 / Redline: 6500 Plus.
CUSTOM GROUND HYDRAULICSpecial order hydraulic lifter camshaft ground to your specifications. Call our technical support staff for personalized camshaft assistance.
.446"
.451"
.477"
.490"
.501"
.526"
.430"
.446"
.451"
.488"
.488"
.512"
202°
210°
218°
218°
226°
234°
196°
202°
210°
214°
220°
228°
Spring pressure:68405-16 Seat: 1.700" @ 104 lbs / Nose: 1.200" @ 297 lbs / Coil bind: 0.980" (Machine work, use cutter 68983*).* Machine work required, specify 3⁄8 pilot shaft when ordering.Valve timing events are available online at: www.crower.comNote: If exceeding 6500 rpm, high pressure springs and titanium retainers may be required. Contact Crower.
Note: These cams use .000" intake and exhaust valve lash.
841508435084150X384350X980
ENGINEERED COMPONENT KITS
68405 -1668405-1668405 -1668405-16
87021-1687021-1687021-1687021-16
Hydraulic Lifter.Solid Lifter.CamSaver Hydraulic Lifter.CoolFace Mechanical Lifter.
66050-1666900-1666050X3-1666900X980-16
Lifters Springs Retainers Remarks86072-1686072-1686072-1686072-16
SealsPart No.
Note: These cams use .022" intake, .024" exhaust valve lash.
50305
00151M
00060
84350304FDP 108°340
ALLCID
ALLCID
.549".536"310°304° 262°256°COMPU-PRO / Performance Level 4Tremendous upper mid to top end torque and horsepower.RPM Power Range: 3000 to 6500 / Redline: 7500 Plus.
CUSTOM GROUND SOLIDSpecial order solid lifter camshaft ground to your specifications. Call our technical support staff for personalized camshaft assistance.
CUSTOM GROUND ROLLERSpecial order roller lifter camshaft ground to your specifications. Call our technical support staff for personalized camshaft assistance.
Available for Land Rover, See Page 90
Refer to www.crower.com for camshaft recommendation
Refer to www.crower.com for camshaftrecommendation
Refer to www.crower.com for camshaftrecommendation
SuitableComponent
Kit
SuitableComponent
Kit
Gross Lift1.6 / 1.6
Intake Exhaust
Gross Lift1.6 / 1.6
Intake Exhaust
Duration @ .050"
Intake Exhaust
Duration @ .050"
Intake Exhaust
Advertised Duration
Intake Exhaust
Advertised Duration
Intake Exhaust
Grind
Grind
Lobe Center
Lobe Center
Part Number
Part Number
Description(Note: See pages 6-7 for a detailed explanation of each Performance Level)
Description(Note: See pages 6-7 for a detailed explanation of each Performance Level)
C.I.D.Group
C.I.D.Group
All previous part numbers no longer listed are still available ascustom grinds. Please contact Crower for more custom grinds.Your RPM range will vary depending on yourCylinder Head Air Flow Data & Cubic Inches. Crower Recommends ZDDPlus for all Flat Tappet Cams
ZDDPlus™ contains 42,700 ppm of phosphorus and 57,300 ppm of zinc. When a 4-ounce bottle of ZDDPlus™ is added to 5 quarts of oil, it is diluted 41:1, which contributes 1047 ppm of phosphorus and 1397ppm of zinc to whatever the oil may or may not already contain.Part #86092 - 4oz Bottle of ZDDPlus & Paste
215 300 340 V8
MECHANICAL FLAT TAPPET
Buick HYDRAULIC FLAT TAPPET
13For technical support call 619-661-6477 or visit www.crower.com
http://www.crower.com/catalog/page-13.html
HYDRAULIC FLAT TAPPET Buick1968-1980
BUICK 350 V8
Spring pressure:68405-16 Seat: 1.700" @ 104 lbs / Nose: 1.200" @ 297 lbs / Coil bind: 0.980" (Machine work, use cutter 68983*).* Machine work required, specify 3⁄8 pilot shaft when ordering. Valve timing events are available online at: www.crower.com
Note: If exceeding 6500 rpm, high pressure springs and titanium retainers may be required. Contact Crower.
841508435084150X384350X980
ENGINEERED COMPONENT KITS
68405 -1668405-1668405 -1668405-16
87021-1687021-1687021-1687021-16
Hydraulic Lifter.Solid Lifter.CamSaver Hydraulic Lifter.CoolFace Solid Lifter.
66050-1666900-1666050X3-1666900X980-16
Lifters Springs Retainers Remarks86072-1686072-1686072-1686072-16
SealsPart No.
Note: These cams use .022" intake, .024" exhaust valve lash.
00150M ALLCID
CUSTOM GROUND SOLIDSpecial order solid lifter camshaft ground to your specifications.Call our technical support staff for personalized camshaft assistance.
50258
50259
00150H
8415084150X3
8415084150X3
8415084150X3
276HDP
284HDP
112°
112°
.468"
.508"
281°
290°
276°
284°
.446"
.499"
220°
234°
210°
226°
Engineered Component Kit for the above part #'s: 84350.For Custom Ground Roller contact CROWER.
Refer to www.crower.com for camshaft recommendation
Note: These cams use .000" intake and exhaust valve lash.
HIGH PERFORMANCE COMPU-PRO / Performance Level 3Strong upper bottom to top end power. RPM Power Range: 1800 to 4500 / Redline: 6000 Plus.
ULTRA PERFORMANCE COMPU-PRO / Performance Level 4Street/strip profile with superior upper bottom to top end torque.RPM Power Range: 2000 to 6000 / Redline: 6500 Plus.
CUSTOM GROUND HYDRAULICSpecial order hydraulic lifter camshaft ground to your specifications. Call our technical support staff for personalized camshaft assistance.
350
350
350 Refer to www.crower.com for camshaftrecommendation
SuitableComponent
Kit
SuitableComponent
Kit
Gross Lift1.55 / 1.55
Intake Exhaust
Gross Lift1.55 / 1.55
Intake Exhaust
Duration @ .050"
Intake Exhaust
Duration @ .050"
Intake Exhaust
Advertised Duration
Intake Exhaust
Advertised Duration
Intake Exhaust
Grind
Grind
Lobe Center
Lobe Center
Part Number
Part Number
Description(Note: See pages 6-7 for a detailed explanation of each Performance Level)
Description(Note: See pages 6-7 for a detailed explanation of each Performance Level)
C.I.D.Group
C.I.D.Group
All previous part numbers no longer listed are still available as custom grinds. Please contact Crower for more custom grinds.Your RPM range will vary depending on yourCylinder Head Air Flow Data & Cubic Inches.
Crower Recommends ZDDPlus for all Flat Tappet CamsZDDPlus™ contains 42,700 ppm of phosphorus and 57,300 ppm of zinc. When a 4-ounce bottle of ZDDPlus™ is added to 5 quarts of oil, it is diluted 41:1, which contributes 1047 ppm of phosphorus and 1397ppm of zinc to whatever the oil may or may not already contain.Part #86092 - 4oz Bottle of ZDDPlus & Paste
MECHANICAL FLAT TAPPET
14 For technical support call 619-661-6477 or visit www.crower.com
http://www.crower.com/catalog/page-14.html
1957-66 Buick V8 364 401 425 (Nail Head) hydraulic & solid cams available. Call Crower
52239
52241
52242
52211
00152H
84054Upgrade84054X3
84054Upgrade84054X3
84054Upgrade84054X3
8405484054X3
112°
112°
112°
108°
276HDP
284HDP
297HDP
304HDP
.487"
.525"
.536"
.559"
.475"
.514"
.538"
.546"
281°
290°
308°
316°
276°
284°
297°
311°
212°
230°
238°
248°
216°
236°
242°
252°
POWER COMPU-PRO / Performance Level 2Perfect combination of power and mileage with extended rpm range. Strong low end and mid-range power for spirited driving on or off the road. RPM Power Range: 1500 to 4000 / Redline: 5500 Plus.
HIGH PERFORMANCE COMPU-PRO / Performance Level 3Intended for the hot street application, these cams offer extended rpm range with emphasis on upper bottom and top end power. RPM Power Range: 1800 to 4500 / Redline: 6000 Plus.
ULTRA PERFORMANCE COMPU-PRO / Performance Level 4Dual purpose hot street/drag strip profile. These cams exhibit strong mid-range and top end torque and horsepower. RPM Power Range: 2000 to 5000 / Redline: 6500 Plus.
HI-DRAULIC HAULER / Performance Level 4Strong mid-range to top end power. RPM Power Range: 2750 to 6250 / Redline: 6500 Plus.
CUSTOM GROUND HYDRAULICSpecial order hydraulic lifter camshaft ground to your specifications. Call our technical support staff for personalized camshaft assistance.
Spring pressure: 68143-16 Seat: 1.850" @ 92 lbs / Nose: 1.350" @ 300 lbs / Coil bind: 1.260" (Stock O.D., no machine work).Note: When using high lift cams (over .480") or modified valve stem lengths, a longer pushrod is required to achieve proper lifter preload (.050" off snap-ring). Use checking pushrod to determine length and call with specs. CAUTION! When using high lift cams pay close attention to retainer, oil seal and valve guide clearance at full lift (minimum .050"). Valve timing events are available online at: www.crower.com
8405484054X3 CamSaver Lifter
ENGINEERED COMPONENT KITS
68143-1668143-16
87019-1687019-16
66050-1666050-16
Lifters Springs Retainers RemarksPart No.
455
455
400430
455
ALLCID
Refer to www.crower.com for camshaftrecommendation
All previous part numbers no longer listed are still available as custom grinds. Please contact Crower for more custom grinds.
SuitableComponent
Kit
Gross Lift1.6 / 1.6
Intake Exhaust
Duration @ .050"
Intake Exhaust
Advertised Duration
Intake ExhaustGrindLobe
CenterPart
Number
Description(Note: See pages 6-7 for a detailed explanation of each Performance Level)
C.I.D.Group
Note: These cams use .000" intake and exhaust valve lash.
Your RPM range will vary depending on yourCylinder Head Air Flow Data & Cubic Inches.
Crower Recommends ZDDPlus for all Flat Tappet CamsZDDPlus™ contains 42,700 ppm of phosphorus and 57,300 ppm of zinc. When a 4-ounce bottle of ZDDPlus™ is added to 5 quarts of oil, it is diluted 41:1, which contributes 1047 ppm of phosphorus and 1397ppm of zinc to whatever the oil may or may not already contain.Part #86092 - 4oz Bottle of ZDDPlus & Paste
Non Roller 1967-1976 400 430 455 V8
Buick HYDRAULIC FLAT TAPPET
15For technical support call 619-661-6477 or visit www.crower.com
http://www.crower.com/catalog/page-15.html
Note: Solid lifter camshafts require adjustable pushrods. See pushrods or contact Crower.
Spring pressure:68143 Seat: 1.850" @ 92 lbs / Nose: 1.350" @ 300 lbs / Coil bind: 1.280" (Stock O.D., no machine work).
Note: If exceeding 6500 rpm, high pressure springs and titanium retainers may be required. See spring and retainer specs or contact Crower for proper recommendations.CAUTION! When using high lift cams pay close attention to retainer, oil seal and valve guide clearance at full lift (minimum .050").Valve timing events are available online at: www.crower.com
COMPU-PRO / Performance Level 3High torque, all purpose profile. RPM Power Range: 2500 to 6000 / Redline: 6000 Plus.
COMPU-PRO / Performance Level 4Superior mid-range and top end torque. Rough Idle RPM Power Range: 3500 to 6500 / Redline: 6500 Plus.
CUSTOM GROUND SOLIDSpecial order solid lifter camshaft ground to your specifications. Call our technical support staff for personalized camshaft assistance.
52310
52312
00152M
8425484254X980
8425484254X980
282FDP
304FDP
108°
108°
282°
304°
287°
310°
238°
258°
242°
262°
.482"
.533"
.488"
.549"
ALLCID
ALLCID
ALLCID
Note: These cams use .022" intake, .024" exhaust valve lash.
8425484254X980 CoolFace Lifter
ENGINEERED COMPONENT KITS
68143-1668143-16
87019-1687019-16
66900-1666900X980-16
Lifters Springs Retainers RemarksPart No.
Refer to www.crower.com for camshaftrecommendation
1957-66 Buick V8 364 401 425 (Nail Head) hydraulic & solid cams available. Call Crower
SuitableComponent
Kit
Gross Lift1.6 / 1.6
Intake Exhaust
Duration @ .050"
Intake Exhaust
Advertised Duration
Intake ExhaustGrindLobe
CenterPart
Number
Description(Note: See pages 6-7 for a detailed explanation of each Performance Level)
C.I.D.Group
All previous part numbers no longer listed are still available as custom grinds. Please contact Crower for more custom grinds.Your RPM range will vary depending on yourCylinder Head Air Flow Data & Cubic Inches.
Crower Recommends ZDDPlus for all Flat Tappet CamsZDDPlus™ contains 42,700 ppm of phosphorus and 57,300 ppm of zinc. When a 4-ounce bottle of ZDDPlus™ is added to 5 quarts of oil, it is diluted 41:1, which contributes 1047 ppm of phosphorus and 1397ppm of zinc to whatever the oil may or may not already contain.Part #86092 - 4oz Bottle of ZDDPlus & Paste
1967-1976 400 430 455 V8
BuickMECHANICAL FLAT TAPPET