2
Built Your Own Drone ArduPilot Mega 2.6 Side Entry Availability: In stock. * Price: £103.00 Qty: 16 Quick Overview ArduPilot Mega 2.6 Side Entry http://www.buildyourowndrone.co.uk/ardupilot-mega-2-6-side-entry.html * Regional taxes and discounts may be applicable Product Description ArduPilot Mega 2.6 Side Entry Features ArduPilot Mega 2.6 Side Entry The ArduPilot Mega 2.6 is a complete open source autopilot system and it was the technologyused by the winners of the prestigious 2012 UAV Outback Challenge & the SparkFun AVC competitions. The ArduPilot Mega 2.6 allowsthe user to turn any fixed wing, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. The 2.6 ArduPilot Mega revision of the ArduPilot Mega board has noonboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far awayfrom power cables and motors which are of magnetic interference. On fixed wing aircraft it's often easier to mount APM far enoughaway from the motors and ESCs to avoid this magnetic interference, so this is not as critical, however the Ardupilot Mega allowsmore flexibility with positioning and is a good choice for all crafts. The ArduPilot Mega 2.6 is designed to be used with the 3DR uBlox GPS with Compass, so that the GPS/Compass unit can be mounted further from noise sources than APM itself. TheArdupilot Mega 2.6 requires a GPS unit with an onboard compass for full autonomy, If you are using the ArduPilot Mega 2.6 with a GPSmodule which has no compass sensor, you must use a stand-alone external compass. We recommend either the Triple Axis MagnetometerHMC5883L with this cable DF13 4 Position Connector 19 cm or the HMC5883L Extenal Compass unit with the 3DR V2 GPS unit. This newArduPilot Mega 2.6 system works with the Power Module with integrated 5.3V regulator and current and voltage sensing to allow a cleanpower supply to the system. Features: Arduino Compatible. Includes 3-axis gyro, accelerometer and magnetometer,along with a high-performance barometer. Onboard 4 MegaByte Dataflash chip for automatic datalogging. Optional off-board GPS, uBlox LEA-6H module with Compass. One of the first open source autopilot systems to use Invensense's 6 DoFAccelerometer/Gyro MPU-6000. Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties. Optional off-board GPS,Mediatek

Build Your Own Drone ArduPilot Mega 2.6 Side Entry

Embed Size (px)

Citation preview

  • Built Your Own Drone

    ArduPilot Mega 2.6 Side Entry

    Availability: In stock.

    *Price: 103.00

    Qty: 16

    Quick Overview

    ArduPilot Mega 2.6 Side Entry

    http://www.buildyourowndrone.co.uk/ardupilot-mega-2-6-side-entry.html* Regional taxes and discounts may be applicable

    Product Description

    ArduPilot Mega 2.6 Side Entry

    Features

    ArduPilot Mega 2.6 Side Entry The ArduPilot Mega 2.6 is a complete open source autopilot system and it was the technologyused

    by the winners of the prestigious 2012 UAV Outback Challenge & the SparkFun AVC competitions. The ArduPilot Mega 2.6 allowsthe

    user to turn any fixed wing, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capableof performing programmed GPS missions with waypoints. The 2.6 ArduPilot Mega revision of the ArduPilot Mega board has noonboard

    compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far awayfrompower cables and motors which are of magnetic interference. On fixed wing aircraft it's often easier to mount APM far enoughaway

    from the motors and ESCs to avoid this magnetic interference, so this is not as critical, however the Ardupilot Mega allowsmore

    flexibility with positioning and is a good choice for all crafts. The ArduPilot Mega 2.6 is designed to be used with the 3DR

    uBlox GPS with Compass, so that the GPS/Compass unit can be mounted further from noise sources than APM itself. TheArdupilot

    Mega 2.6 requires a GPS unit with an onboard compass for full autonomy, If you are using the ArduPilot Mega 2.6 with a GPSmodule

    which has no compass sensor, you must use a stand-alone external compass. We recommend either the Triple Axis MagnetometerHMC5883L

    with this cable DF13 4 Position Connector 19 cm or the HMC5883L Extenal Compass unit with the 3DR V2 GPS unit. This newArduPilot

    Mega 2.6 system works with the Power Module with integrated 5.3V regulator and current and voltage sensing to allow a cleanpower

    supply to the system. Features: Arduino Compatible. Includes 3-axis gyro, accelerometer and magnetometer,along

    with a high-performance barometer. Onboard 4 MegaByte Dataflash chip for automatic datalogging. Optional off-board GPS,

    uBlox LEA-6H module with Compass. One of the first open source autopilot systems to use Invensense's 6 DoFAccelerometer/Gyro

    MPU-6000. Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties. Optional off-board GPS,Mediatek

  • Built Your Own Drone

    http://www.buildyourowndrone.co.uk/ardupilot-mega-2-6-side-entry.html* Regional taxes and discounts may be applicable

    MT3329 V2 or uBlox LEA-6H module. Atmel's ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively.

    Pre solder with straight pin headers.