www.OldStateCapitol.org www.BuildYourOwnMainStreet.org

Left End

B C

E

Righ

t En

dw

ww

.Lin

coln200.n

etw

ww

.illinois-h

istory.gov

ww

w.L

ookin

gforLin

coln.com

BC

F

1

Back Wall

Glue Back Roof to this Tab

C D

Shastid Cabin, Pittsfield, ILFront Wall

Glue Front Roof to this Tab

A B

G

I

H

J

Photo of complete model

Printed image

Fold redlines and letters forward

Fold green lines andletters backward

Lightly score then fold black dotted lines

Basic Directions:

www.Lincoln200.net www.illinois-history.govwww.LookingforLincoln.com

www.OldStateCapitol.org www.BuildYourOwnMainStreet.org

BUILD YOUR OWN LINCOLN SITES PAGE of 2

SHASTID CABIN

PITTSFIELD, ILLINOIS

K K

To Add Roofs and Chimney:

1. Cut out the Front and Back Roof pieces. Cut thru the Roof pieces at the white lines for the chimney later. Fold all dotted lines.2. Glue the Back roof to the Sides using tabs G thru J and to the Back wall tab. 3. Glue the Front Roof to the Sides, using tabs E and F, to theFront wall tab, and to the back roof tab. The Front Roof top edge will project over the ridge 1/16th inch approximately. 4.

5. Glue the Chimney to the Roofs by inserting the tab in the slots.

Cut out the Chimney and glue up into a box using tab K andthe blank tab under the chimney top.

To Add Sides and Back:

1. Cut out the Side and Back pieces. Fold all dotted lines. 2. Glue the Front onto the Left and Right Sides using tabs A and B.3. .4. Glue the corners of all bottom tabs to create a base.

Glue the Back onto the sides using tabs C and D

2

Bottom edge of Back Roof

Fold this tab down about 30 deg. to fit pitch of roof. The top of the Front roof will be glued to here.

G H

I J

Cut slot at white linefor Chimney tab.

Bottom edge of Front Roof

E F

Cut slot at white linefor Chimney tab.

www.Lincoln200.net www.illinois-history.govwww.LookingforLincoln.com

www.OldStateCapitol.org www.BuildYourOwnMainStreet.org

BUILD YOUR OWN LINCOLN SITES PAGE of 2

SHASTID CABIN

PITTSFIELD, ILLINOIS