Building A Sherwood OR 97140 - Sederra Sederra Catalog.pdf · Building A Sherwood OR 97140 Tel: 1-888-749-4283 Fax: ... Archtop. L 6 Re101010 L ... building. Sherwood OR 97140

www.sederra.com

3

GATE CO

LLECTION

Scu

stomize

accessories

hardw

arefin

ishes

operatorsreso

urces

toc

Sederra

13780 SW Galbreath Dr

Building A

Sherwood OR 97140

Tel: 1-888-749-4283

Fax: 1-503-925-8910

[email protected] – www.sederra.com

Table of Contents Idea Gallery 4Gate Collections

Signature Collection 6Rose City Collection 7Sherwood Collection 8Portland Collection 9Craftsman Collection - Mission Diamond 10Craftsman Collection - TriDiamond 11Summit Collection - Sunray 12Summit Collection - Sunrise 13Coachman Collection - Small Window 14Coachman Collection - Medium Window 15Old Worlde Collection 16Lattice Collection 17Astoria Collection 18Timberline Collection 19

Customize Frame Options 20Panel Options 21Customize: Non Standard Top Profiles for Single Swing Gate 21DIY Fence Panel Kits 22

Accessories Bronze Clavos 23Clavos 23Clavos with Installation 23Jambs, Brackets 24Post Caps 25Copper Gate Caps 25

Hardware Hardware Finishes 26Get the Look Hardware Bundles 26Latches 27Pulls 28Canebolts 28Hardware Installation 28Hinges 29Decorative Gate Hinge Straps 29Medium Load Gate Hinges 30High Load Gate Hinges 31Leversets 32Deadbolts 33Emtek Keyless Entry 34

Finishes Stain Only - DIY Finish 35

Paint Prefinished 35Sealing Stains 35Spar Urethane Clear Coat 35

Gate Automation Packages 36Accessories - FAAC 37Accessories - GTO 38

Dealer Resources Process Reference 39Quick Reference / FAQ's 40Installation Diagrams 41Material, Finish & Warranty 42

www.sederra.com

Rev1010104

www.sederra.com

Rev101010 5

tocto

c

Craftsman Mission Diamond, Archtop

Coachman Medium Window, Flattop

Rose City, Archtop

Sherwood Speakeasy Grille + Peek Door, Archtop

Signature with Pyramid Clavos, Full Radius Arch

Portland Double Swing, Archtop

Astoria Wood Pickets, Archtop

Summit Collection – Sunray, Archtop

Old Worlde Double Swing,Compound Archtop

Lattice Collection Double Swing,Archtop

Timberline with Diamond Set Pyramid Clavos,

Double Swing Archtop

Idea Gallery

Astoria Collection Double Swing, Archtop

Craftsman Mission Diamond, Archtop

Signature Collection Double Swing, Compound Archtop

Sherwood Collection with Speakeasy Grille and Peek Door, Archtop

Signature Collection with Fin Tie Plates,Double Swing, Compound Reverse Archtop-

Sherwood Collection with Peek Door, Spar Urethane Clear Coat

Portland Collection Double Swing, Compound Archtop

Old Worlde Collection Double Swing with Tie Plates,Archtop

www.sederra.com

Rev1010106

www.sederra.com

Rev101010 7

GATE CO

LLECTION

SGAT

E CO

LLEC

TIO

NS

Gate CollectionsSignature Collection

1 1/2" thick

frame - standard

Upgradeable to 2 1/8" or

3" thick 4008040000

Up to 48” tall48 - 86” tall

40246

40249

8 to 10ft wide

8 to 10ft wide

40330

40333

10 to 12ft wide

10 to 12ft wide

40414

40417

12 to 14ft wide

12 to 14ft wide

Single Swing

2 to 4ft wide

Up to 86” tall

40160

40165

1 1/2" thick

frame - standard


3" thick

2 1/8" thick

frame - standard

Upgradeable

to 3" thick

4008240002


4008140001


4008340003


4016140162

Double Swing

4 to 8ft wide

Up to 86” tall

Double Swing

> 8ft wide

Up to 86” tall

40166

40250

40244 40245

8 to 10ft wide

8 to 10ft wide 8 to 10ft wide

40334

40328 40329

10 to 12ft wide


40418

40412 40413

12 to 14ft wide


- Requires a custom quote for pricing: >86in tall, > 14ft wide, Single swing gates > 5ft wide

8 - 10ft wide - High Load Hinges recommended10 - 14ft wide - includes steel support frame w/ integrated ball bearing hinges

- Mortise & Tenon Joinery - 5/8in thick tongue & groove panels - Clear-grade, kiln-dried - Western Red Cedar

Rose City Collection

1 1/2" thick

frame - standard


3" thick 4008540005


40252

40256

8 to 10ft wide

8 to 10ft wide

40336

40340

10 to 12ft wide

10 to 12ft wide

40420

40424

12 to 14ft wide

12 to 14ft wide

Single Swing

2 to 4ft wide

Up to 86” tall

40167

40172

1 1/2" thick

frame - standard


3" thick

2 1/8" thick

frame - standard

Upgradeable

to 3" thick

4008740007


4008640006


4008840008


40169 40168

Double Swing

4 to 8ft wide

Up to 86” tall

Double Swing

> 8ft wide

Up to 86” tall

40173

40257

40251 40253

8 to 10ft wide


40341

40335 40337

10 to 12ft wide


40425

40419 40421

12 to 14ft wide




- Mortise & Tenon Joinery - 5/8in thick tongue & groove panels - 5/8" thick pickets, 3.5" wide pickets, 3" wide spaces

- Clear-grade, kiln-dried - Western Red Cedar

www.sederra.com

Rev1010108

www.sederra.com

Rev101010 9

GATE CO

LLECTION

SGAT

E CO

LLEC

TIO

NS

1 1/2" thick

frame - standard


3" thick 40500 40502 40501 40503

40519

40522

8 to 10ft wide

8 to 10ft wide

40526

40529

10 to 12ft wide

10 to 12ft wide

40533

40536

12 to 14ft wide

12 to 14ft wide

Single Swing

2 to 4ft wide

Up to 86” tall

40510

40515

1 1/2" thick

frame - standard


3" thick

2 1/8" thick

frame - standard

Upgradeable

to 3" thick

4051140512

Double Swing

4 to 8ft wide

Up to 86” tall

Double Swing

> 8ft wide

Up to 86” tall

40516

40523

40517 40518

8 to 10ft wide


40530

40524 40525

10 to 12ft wide


40537

40531 40532

12 to 14ft wide




- Mortise & Tenon Joinery - 5/8in thick tongue & groove panels - 13x13 window (8x8 opening) - Six window options to choose from


Sherwood Collection

Six Window Openings

Portland Collection

1 1/2" thick

frame - standard


3" thick 4097740973


40988

40989

8 to 10ft wide

8 to 10ft wide

40993

40994

10 to 12ft wide

10 to 12ft wide

40998

40999

12 to 14ft wide

12 to 14ft wide

Single Swing

2 to 4ft wide

Up to 86” tall

40981

40984

1 1/2" thick

frame - standard


3" thick

2 1/8" thick

frame - standard

Upgradeable

to 3" thick

4097840974


4097940975


4098040976


40982 40983

Double Swing

4 to 8ft wide

Up to 86” tall

Double Swing

> 8ft wide

Up to 86” tall

40985

40990

40986 40987

8 to 10ft wide


40995

40991 40992

10 to 12ft wide


41000

40996 40997

12 to 14ft wide




- Mortise & Tenon Joinery - 5/8in thick tongue & groove panels - Lattice is 1.5in wide x 1.5in thick, 5in wide spaces


FRONT

4-Pane Window

9-Pane Window

Peek Door

Speakeasy Grill

Speakeasy Grill + Peek Door

FRONT BACKBACK

Open Frame

www.sederra.com

Rev10101010

www.sederra.com

Rev101010 11

GATE CO

LLECTION

SGAT

E CO

LLEC

TIO

NS

1 1/2" thick

frame - standard


3" thick 4009140011


40279

40309

8 to 10ft wide

8 to 10ft wide

40363

40393

10 to 12ft wide

10 to 12ft wide

40447

40477

12 to 14ft wide

12 to 14ft wide

Single Swing

2 to 4ft wide

Up to 86” tall

40175

40225

1 1/2" thick

frame - standard


3" thick

2 1/8" thick

frame - standard

Upgradeable

to 3" thick

4011140031


4010140021


4012140041


4018540195

Double Swing

4 to 8ft wide

Up to 86” tall

Double Swing

> 8ft wide

Up to 86” tall

40235

40319

40259 40269

8 to 10ft wide


40403

40343 40353

10 to 12ft wide


40487

40427 40437

12 to 14ft wide




- Mortise & Tenon Joinery - 5/8in thick tongue & groove panel - Precision profiled steel window art, Powder coated black, 1/8" - 3/16" steel, 1" wide typical


Craftsman Collection - Mission Diamond Craftsman Collection - TriDiamond

1 1/2" thick

frame - standard


3" thick 4009240012


40270

40310

8 to 10ft wide

8 to 10ft wide

40354

40394

10 to 12ft wide

10 to 12ft wide

40438

40478

12 to 14ft wide

12 to 14ft wide

Single Swing

2 to 4ft wide

Up to 86” tall

40176

40226

1 1/2" thick

frame - standard


3" thick

2 1/8" thick

frame - standard

Upgradeable

to 3" thick

4011240032


4010240022


4012240042


40196 40186

Double Swing

4 to 8ft wide

Up to 86” tall

Double Swing

> 8ft wide

Up to 86” tall

40236

40320

40260 40280

8 to 10ft wide


40404

40344 40364

10 to 12ft wide


40488

40428 40448

12 to 14ft wide






www.sederra.com

Rev10101012

www.sederra.com

Rev101010 13

GATE CO

LLECTION

SGAT

E CO

LLEC

TIO

NS

1 1/2" thick

frame - standard


3" thick 4009340013


40281

40311

8 to 10ft wide

8 to 10ft wide

40365

40395

10 to 12ft wide

10 to 12ft wide

40449

40479

12 to 14ft wide

12 to 14ft wide

Single Swing

2 to 4ft wide

Up to 86” tall

40177

40227

1 1/2" thick

frame - standard


3" thick

2 1/8" thick

frame - standard

Upgradeable

to 3" thick

4011340033


4010340023


4012340043


4018740197

Double Swing

4 to 8ft wide

Up to 86” tall

Double Swing

> 8ft wide

Up to 86” tall

40237

40321

40261 40271

8 to 10ft wide


40405

40345 40355

10 to 12ft wide


40489

40429 40439

12 to 14ft wide






Summit Collection - Sunray Summit Collection - Sunrise

1 1/2" thick

frame - standard


3" thick 4009440014


40272

40312

8 to 10ft wide

8 to 10ft wide

40356

40396

10 to 12ft wide

10 to 12ft wide

40440

40480

12 to 14ft wide

12 to 14ft wide

Single Swing

2 to 4ft wide

Up to 86” tall

40178

40228

1 1/2" thick

frame - standard


3" thick

2 1/8" thick

frame - standard

Upgradeable

to 3" thick

4001440034


4010440024


4012440044


40198 40188

Double Swing

4 to 8ft wide

Up to 86” tall

Double Swing

> 8ft wide

Up to 86” tall

40238

40322

40262 40282

8 to 10ft wide


40406

40346 40366

10 to 12ft wide


40490

40430 40450

12 to 14ft wide






www.sederra.com

Rev10101014

www.sederra.com

Rev101010 15

GATE CO

LLECTION

SGAT

E CO

LLEC

TIO

NS

1 1/2" thick

frame - standard


3" thick 4009540015


40283

40313

8 to 10ft wide

8 to 10ft wide

40367

40397

10 to 12ft wide

10 to 12ft wide

40451

40481

12 to 14ft wide

12 to 14ft wide

Single Swing

2 to 4ft wide

Up to 86” tall

40179

40229

1 1/2" thick

frame - standard


3" thick

2 1/8" thick

frame - standard

Upgradeable

to 3" thick

4011540035


4010540025


4012540045


4018940199

Double Swing

4 to 8ft wide

Up to 86” tall

Double Swing

> 8ft wide

Up to 86” tall

40239

40323

40263 40273

8 to 10ft wide


40407

40347 40357

10 to 12ft wide


40491

40431 40441

12 to 14ft wide






Coachman Collection - Small Window Coachman Collection - Medium Window

1 1/2" thick

frame - standard


3" thick 4009640016


40274

40314

8 to 10ft wide

8 to 10ft wide

40358

40398

10 to 12ft wide

10 to 12ft wide

40442

40482

12 to 14ft wide

12 to 14ft wide

Single Swing

2 to 4ft wide

Up to 86” tall

40180

40230

1 1/2" thick

frame - standard


3" thick

2 1/8" thick

frame - standard

Upgradeable

to 3" thick

4011640036


4010640026


4012640046


40200 40190

Double Swing

4 to 8ft wide

Up to 86” tall

Double Swing

> 8ft wide

Up to 86” tall

40240

40324

40264 40284

8 to 10ft wide


40408

40348 40368

10 to 12ft wide


40492

40432 40452

12 to 14ft wide






www.sederra.com

Rev10101016

www.sederra.com

Rev101010 17

GATE CO

LLECTION

SGAT

E CO

LLEC

TIO

NS

1 1/2" thick

frame - standard


3" thick 4009940019


40287

40317

8 to 10ft wide

8 to 10ft wide

40371

40401

10 to 12ft wide

10 to 12ft wide

40455

40485

12 to 14ft wide

12 to 14ft wide

Single Swing

2 to 4ft wide

Up to 86” tall

40183

40233

1 1/2" thick

frame - standard


3" thick

2 1/8" thick

frame - standard

Upgradeable

to 3" thick

4011940039


4010940029


4012940049


4019340203

Double Swing

4 to 8ft wide

Up to 86” tall

Double Swing

> 8ft wide

Up to 86” tall

40243

40327

40267 40277

8 to 10ft wide


40411

40351 40361

10 to 12ft wide


40495

40435 40445

12 to 14ft wide




- Mortise & Tenon Joinery - 5/8in thick tongue & groove panel - 1"x1" hammered steel tube Powder coated black


Old Worlde Collection Lattice Collection

1 1/2" thick

frame - standard


3" thick 4009840018


40276

40316

8 to 10ft wide

8 to 10ft wide

40360

40400

10 to 12ft wide

10 to 12ft wide

40444

40484

12 to 14ft wide

12 to 14ft wide

Single Swing

2 to 4ft wide

Up to 86” tall

40182

40232

1 1/2" thick

frame - standard


3" thick

2 1/8" thick

frame - standard

Upgradeable

to 3" thick

4011840038


4010840028


4012840048


40202 40192

Double Swing

4 to 8ft wide

Up to 86” tall

Double Swing

> 8ft wide

Up to 86” tall

40242

40326

40266 40286

8 to 10ft wide


40410

40350 40370

10 to 12ft wide


40494

40434 40454

12 to 14ft wide




- Mortise & Tenon Joinery - 5/8in thick tongue & groove panel - Precision profiled steel window art - Powder coated black - 1/8" - 3/16" steel, 3/4" - 1" wide lattice typical


www.sederra.com

Rev10101018

www.sederra.com

Rev101010 19

GATE CO

LLECTION

SGAT

E CO

LLEC

TIO

NS

2 1/8" thick

frame - standard

Upgradeable

to 3" thick4083740833


40847

40849

8 to 10ft wide

8 to 10ft wide

40852

40854

10 to 12ft wide

10 to 12ft wide

40857

40859

12 to 14ft wide

12 to 14ft wide

Single Swing

2 to 4ft wide

Up to 86” tall

40841

40844

2 1/8" thick

frame - standard

Upgradeable

to 3" thick

2 1/8" thick

frame - standard

Upgradeable

to 3" thick

4083840834


4083940835


4084040836


4084340842

Double Swing

4 to 8ft wide

Up to 86” tall

Double Swing

> 8ft wide

Up to 86” tall

40845

40850

40846 40848

8 to 10ft wide


40855

40851 40853

10 to 12ft wide


40860

40856 40858

12 to 14ft wide




- Mortise & Tenon Joinery - 1.5" thick pickets, 2 /18" thick frame - Optional alternating metal pickets (bar, knuckle,vine)


Astoria Collection Timberline Collection

2 1/8" thick

frame - standard

Upgradeable

to 3" thick4300443000


43015

43016

8 to 10ft wide

8 to 10ft wide

43020

43021

10 to 12ft wide

10 to 12ft wide

43025

43026

12 to 14ft wide

12 to 14ft wide

Single Swing

2 to 4ft wide

Up to 86” tall

43008

43011

2 1/8" thick

frame - standard

Upgradeable

to 3" thick

2 1/8" thick

frame - standard

Upgradeable

to 3" thick

4300543001


4300643002


4300743003


43009 43010

Double Swing

4 to 8ft wide

Up to 86” tall

Double Swing

> 8ft wide

Up to 86” tall

43012

43017

43013 43014

8 to 10ft wide


43022

43018 43019

10 to 12ft wide


43027

43023 43024

12 to 14ft wide




- Mortise & Tenon Joinery - 2 1/8" thick frame - 2 1/8" thick lattice - 3 1/16" wide Lattice, 8 1/2" wide spaces

- Clear-grade, kiln-dried - Blocky wood lattice - Western Red Cedar

Wood Pickets with Knuckle Bars

Wood Pickets with Vine Bars

Knuckle BarsRound Iron Bars Vine Bars

Wood Pickets with Round Iron Bars

** Wood Picket Option Depicted in Catalog Images **

www.sederra.com

Rev10101020

www.sederra.com

Rev101010 21

custo

mizecu

sto

miz

e

CustomizeFrame Options Panel Options

900221

900520

900222

900521

900503

900505

900504

900506

900507 900500900508 900501

900223 900513900224 900514

900225 900512 900510 900509 900511900502 900522

Additional Mid Rail for Single Swing Gate less than 4ft wide Remove Mid Rail, Increase Tongue and Groove

Thickness to 1in, Up to 5ft wide Gate

Additional Mid Rail for Double Swing Gate less than 14ft wide Remove Mid Rail, Increase Tongue and Groove

Thickness to 1in, For 5 - 8ft wide Gate

Increased Bottom Rail Height for Single Swing Gate 3/8” Wide Panel Slots for

Single Swing Gate

Increased Bottom Rail Height for Double Swing Gate 3/8” Wide Panel Slots for

Double Swing Gate

Curved Mid Rail for Single Swing Gate Decorative Diagonal, for Single Swing Gate, One Side of Gate

Curved Mid Rail for Double Swing Gate Decorative Diagonals, for Double Swing Gate, One Side of Gate

Pet Window for Single Swing Gate less than 4ft wide Decorative ‘X’ for Single Swing Gate

Pet Window for Double Swing Gate less than 14ft wide Decorative ‘X’ for Double Swing Gate

2 1/8in frame thickness upgrade for Single Swing Gate less than 4ft wide

Cathedral Arch for Single Swing Gate

Reverse Compound Archtop for Single Swing Gate

Compound Archtop for Single Swing Gate

Reverse Full Radius for Single Swing Gate

Oversize Gate Width for Single Swing Gate Includes automatic upgrade to 2 1/8in thick frame

3in frame thickness upgrade for Single Swing Gate less than 4ft wide

Customize: Non Standard Top Profiles for Single Swing GateStandard Top Profiles for Single Swing Gates are (1) archtop (2) reverse archtop (3) flattop (4) full radius archtop

- Precision profiled steel, powder coated black

- Increase bottom rail up to 8-3/4in tall - Increase bottom rail up to 8-3/4in tall

- Precision profiled steel, powder coated black

www.sederra.com

Rev10101022

www.sederra.com

Rev101010 23

accessories

DIY Fence Panel Kits ClavosBronze Clavos

Clavos with Installation

Accessories

- Create beautiful fence lines or install with a gate to fill a larger opening - Dimensionally stable lumber - Kiln-dried Clear cedar - Custom Sizes - Cut board lengths to adjust to overall height and width requirements - No nailing, so board will not split or come loose - Corrosion resistant powder coated lag screws - Includes heavy duty brackets - Installs between free standing posts (NOT included)

- False nail heads, decorative - Powder coated, black - Sold individually - Price includes installation if purchased with gate - ‘Clavos’ means Nails, in Spanish

- False nail heads, decorative - Cast Solid Bronze - Sold individually - Price includes installation if purchased with gate - ‘Clavos’ means Nails, in Spanish

- False nail heads, decorative - Powder coated, black - Price includes installation - Can be installed on any Gate Collection - ‘Clavos’ means Nails, in Spanish

295 29035” wide Signature DIY Panel Kit (Unassembled) 70” wide Signature DIY Panel Kit (Unassembled)

- Clear grade, Kiln-dried Western Red Cedar - Install between wood posts / jambs (NOT INCLUDED) - Cut to fit to create custom height and width (max. 96 1/2”H x 35”W) - Tongue and groove slats: 5/8” thick; 5” exposed width - Rails: 1 1/2” thick x 5 1/2” wide; 3/16” beveled edges

- Clear grade, Kiln-dried Western Red Cedar - Install between wood posts / jambs (NOT INCLUDED) - Cut to fit to create custom height and width (max. 96 1/2”H x 70”W) - Tongue and groove slats: 5/8” thick; 5” exposed width - Rails: 1 1/2” thick x 5 1/2” wide; 3/16” beveled edges

881 - 1” 883 - 2”

710 - 1” 882 - 2”

1 1/4” Domed - 8881 1/4” Pyramid - 894

1 1/4” Domed - 8881 1/4” Pyramid - 894

1 1/4” Domed - 8881 1/4” Pyramid - 894

1 1/4” Domed - 8901 1/4” Pyramid - 896

1 1/4” Domed - 8901 1/4” Pyramid - 896

1 1/4” Domed - 8901 1/4” Pyramid - 896

- Approx 1” long nail - Very dark antique bronze

- Approx 1” long nail - Very dark antique bronze - Domed Clavos, Black 1/2” shank - Pyramid Clavos, Black 1/2” shank

875 - 3/4”873 - 1 1/4” 877 - 1 3/4”878 - 2”

880 - 3/4”874 - 1 1/4” 876 - 2”

Clavos Shape

5ft or less gate width

Up to 8ft wide gate

8-14ft wide gate

Gate Width Four Rows of Clavos Two Rows of Clavos

Part numbers are for one side (Street), choose quanitity of (2) for both sides



1 1/4" Domed Clavos, Black1/2" shank

1 1/4" Domed Clavos, Black1/2" shank

cust

om

ize

35” DIY Panel Kit Includes:

• (2)35”widetop/bottomrails*• (1)35”widemid-rail*• (8)35”tongue-and-groove

slatsfortoppanel*• (8)47”tongue-and-groove

slatsforbottompanel*• (6)Mountingbracketswith

fasteners

*Kiln-dried,cleargradeWesternRedCedar

DIY: Unassembled:cut-to-fittocreatecustomheightsandwidths

(max:96-1/2”Hx35”W).

Installbetweenwoodposts/jambs--NOTincluded

DIY: Unassembled:cut-to-fittocreatecustomheightsandwidths

(max:96-1/2”Hx70”W).

Installbetweenwoodposts/jambs--NOTincluded

70” DIY Panel Kit Includes:

• (2)70”widetop/bottomrails*• (1)70”widemid-rail*• (8)35”tongue-and-groove

slatsfortoppanel*• (8)47”tongue-and-groove

slatsforbottompanel*• (6)Mountingbracketswith

fasteners

*Kiln-dried,cleargradeWesternRedCedar

www.sederra.com

Rev10101024

www.sederra.com

Rev101010 25

accessoriesaccessories

Jambs, Brackets

31500 2x4 jamb, Clear Western Red Cedar

597 “L” Tie Plate, PC black, 1/8” thick

60358 Corner Tie Plate “Fin”, 1/8” thick


599“T” Tie Plate. PC black, 1/8” thick

409Speakeasy Grille, 12” x 12”

428Fence Panel Mounting Bracket


900226 Tie Plate for Upper, Outside Corner

with Custom Radius, 1/8” thick

355 Bronze Speakeasy Grille, 14” x 14”

626 Receiver plate for High Load Hinges

324 4”x4”x8’ Steel Post (.120 wall),

Capped

900227 Tie Plate for Upper, Inside Corner with Custom Radius, 1/8” thick

426 Masonry Anchor for 2x jambs

629 Receiver plate - Offset, for High

Load Hinges

- Each masonry anchor includes a 2 1/2” lag bolt and a lead shield - Suitable for mounting 2x4 & 2x6

jambs to masonry walls/columns - Masonry walls/columns must be

of adequate construction to support jambs and gate.

- Plate: 3 1/2” x 6” - Typically used on the bottom

most strap hinge to allow for a 2” ground clearance. - Welded nut accepts threaded

pin of high load hinges

- Powder coated, black - Installation included

- 1/8” thick - Powder coated black - Comes with 4 Flat Head Screws:

12 x 1.5(PC)

- Cast solid bronze - Very dark antique bronze

- Plate: 3 1/2” x 6” - Welded nut accepts threaded pin

of high load hinges

Post Caps

Copper Gate Caps

32058 6x6 Cedar Pyramid Post Cap

32060 Copper Cap for Single Swing Gates less than 5ft wide

32061 Copper Cap for Double Swing Gates less than 14ft wide

32059 6x6 Cedar Mission Copper Pyramid Post Cap

- 5-5/8” inner width - 2-7/8” overall height - 7-9/16” outer overall width - Fits max post size 5.5” x 5.5” - 13deg slope pyramid

- .020” Thick Copper Sheet - Custom fit for each gate order - Attached with copper coated fasteners - Provides increased protection from moisture runoff

- .020” Thick Copper Sheet - Custom fit for each gate order - Attached with copper coated fasteners - Provides increased protection from moisture runoff

- Solid copper sheet, precision stamped - Fits max post size 5.5” x 5.5”; mounted on 1/4” ext.

plywood base - 5-5/8” inner width - 3-3/4” overall height - 7-5/8” outer overall width, 27deg slope pyramid

- Powder coated, black - Welded flat cap, sealed

www.sederra.com

Rev10101026

www.sederra.com

Rev101010 27

hardw

arehar

dwar

e

HardwareHardware Finishes Latches

Get the Look Hardware Bundles

Look for these finish logos to match your hardware

900527 Get the Look - Rustic Collection

900525 Get the Look - Contemporary Collection

900526 Get the Look - Modern Collection

900528 Get the Look - Traditional Collection

Get the Look Bundle Includes: - 2 - (703) 12” Bronze Strap Hinges - 2 - (704) Bronze Hinge Pintle on Plate - 1 - (60837) 10” Bronze Gate Latch with 7 1/2” dropbar - 28 - (881) Bronze Clavos, pre-installed

Get the Look Bundle Includes: - 3 - (10717) Oil Rubbed Bronze Self-Closing Butt Hinges - 1 - (1108) Medium Bronze Deadbolt - 1 - (1100) Medium Bronze Durango Leverset - 1 - (900225) 2 1/8” Frame Thickness Upgrade - 1 - Hardware Installation - Install HS / DB - 1 - Hardware Installation - Mortise for Butt Hinges

Get the Look Bundle Includes: - 3 - (2002) Stainless Steel Butt Hinges - 1 - (1206) Stainless Steel Deadbolt - 1 - (1200) Stainless Steel Athena Leverset - 1 - Hardware Installation - Install HS / DB - 1 - Hardware Installation - Mortise for Butt Hinges

Get the Look Bundle Includes: - 3 - (698) Black Self-Closing Butt Hinges - 1 - (762) Black Deadbolt - 1 - (46000) Black Normandy Leverset - 1 - (888) 4 Rows of Black Domed Clavos, one side of gate - 1 - Hardware Installation - Install HS / DB - 1 - Hardware Installation - Mortise for Butt Hinges

867 Hampton Thumb Gate Latch, Pad Lockable

786 Bronze Slide Bolt, 8” x 1 3/4”

60834 - up to 3 1/2” thick door 60836 - up to 5” thick door

Bronze Gate Latch, 8in, w/ 7 1/2” Drop Bar (up to 3 1/2” door)

60835 - up to 3 1/2” thick door 60837 - up to 5” thick door

Bronze Gate Latch, 10in, w/ 7 1/2” Drop Bar (up to 3 1/2” door)

61001 Traditional Suffolk Gate Latch, Black, 8in

61005 Windsor Gate Latch, Black

61001 Antique Suffolk Gate Latch, Black, 10in

866 Twisted Ring Gate Latch, 3”, Pad Lockable

791Bronze Gate Stop 1 1/2” x 1 1/2”

792 Bronze Jamb Catch

793Bronze Mortise Plate for Slide Bolt

- Zinc Plated Steel, Powder Coated Black - Backplate: 1 3/4” x 8” - Drop Bar: 7 1/2” x 3/4” - Catch and Retainer Pieces: 3/4” x 3” - Suitable for Gates up to 3” thick - Push to Open Only; not for gates that

swing out

- Zinc Plated Steel, Powder Coated Black - Push to Open Only; not for gates that

swing out

- Powder Coated Black - Push to Open Only; not for gates that

swing out

- Retainer and Catch Pieces: 3/4” x 1 3/4” - Push to Open Only; not for gates that swing out

- Retainer and Catch Pieces: 3/4” x 1 3/4” - Push to Open Only; not for gates that swing out

- Handle: 7” tall - Drop Bar: 5.5” long - Flip-over Locking Mechanism - Includes “D” Pad Lock Eyes: 2 1/8” x 2” each - Push to Open Function; not for gates that swing out

- Rosette Back Plate: 2 3/8” diameter Ring: 3” diameter - Drop Bar: 6” x 1” Catch: 3 3/4” x 3/4” - Front of Latch has Rosette and Ring for Operation;

Push to Open Only; not for gates that swing out - Includes “D” Pad Lock Eyes: 2 1/8” x 2” each - Matching Ring Pull Available (Gate Hardware > Pulls)

www.sederra.com

Rev10101028

www.sederra.com

Rev101010 29

hardw

arehar

dwar

e

Pulls

Canebolts

Hardware Installation

784 Bronze Pull Handle, 8in

706 Bronze Cane Bolt - 20in

10853Bronze Pull Handle, 10in

709Cane Bolt, Black - 18in, Stainless Steel,

Powder Coated Black, Non Lockable

61002 Lion Door Knocker, 4in

715 Cane Bolt, Brushed Stainless Steel -

18in, Non Lockable

868Twisted Ring Pull, 3in

750Cane Bolt, Black - 24in, Steel, Powder

Coated Black, Lockable

- Cast Solid Bronze - Very Dark antique bronze

- Plates: 2in x 4in - Cast solid bronze - Pins gate to ground - Use in double swing application - Very dark antique bronze

- Cast Solid Bronze - Very Dark antique bronze

- 5/8in Diameter rod - Pins gate to ground - Use in double swing application

- Allows gate edge and/or jamb to be mortised for up to three butt hinges - Reduces hinge side gap; 1/8in if only gate edge is

mortised; 1/16in if gate edge and jamb are mortised - Approximate mortise dimensions: 4in x 1.25in;

depth dependent on gap size as noted above

- 2 3/8in backset - 2 1/8in main bore (through gate) - 1in cross-bore (side hole) - 1in wide edge mortise so that side plate is flush

- Includes all fasteners - Powder coated black

- 5/8in Diameter rod - 18in long cane bolt rod - Pins gate to ground - Use in double swing application

- Rosette Back Plate: 2 3/8”, Ring 3” - Matching Ring Latch available

- Lockable with Padlock (not included) - 5/8in Diameter rod, 10in drop - Black powder coated over hot dip

galvanized steel - Pins gate to ground

900499 900220Mortising for Butt Hinges (up to 3) Install Leverset and / or Deadbolt

Hinges

Decorative Gate Hinge Straps

699 Black Butt Hinge, 4in x 4in

2000 4in x 4in Brass Butt Hinge, Oil Rubbed

Bronze

692Pair, 12in Heavy Gate Stainless Steel

Hinges

698 Self Closing Gate Hinge, Butt Hinge,

Black, 4in x 4in (1/4inR corners)

10717 Self Closing Gate Hinge, Butt Hinge, Oil Rubbed

Bronze, 4in x 4in (1/4inR corners)

61003 Pair, Vintage Gate Strap Hinges, Black

2002 4in x 4in Stainless Steel Butt Hinge

2001 4in x 4in Brass Butt Hinge, Satin Nickel

Finish

693 Pair, 12in Cranked Gate Band Hinges

- Max door weight: 200 lbs (3 hinges) - Ball bearing, Commercial grade


- Max door weight: 200 lbs (pair) - Fasteners and Carriage bolt included - Powder coated black

- 85010 - 85014 - Sold individually - Non-functional; decorative only. Powder coated, black - 3/8in Hex-head Lag Bolts included - Strap Height: 2 1/8in - Use with butt hinges, Medium Load hinges or High Load hinges



- Various Lengths (12in - 36in), Reversible - Max door weight: 200 lbs (pair) - Includes all fasteners



- Galvanized, black - Max door weight: 200 lbs (pair)

Signature Mission Diamond Mission Rose Spade Bean Spear Old World

LengthStrap HeightPart Number

8in2 1/8”85010

14in2 1/8”85011

20in2 1/8”85012

32in2 1/8”85013

42in2 1/8”85014

www.sederra.com

Rev10101030

www.sederra.com

Rev101010 31

hardw

arehar

dwar

e

Medium Load Gate Hinges

- 85000 - 85009 - Sold individually - Max door weight: 225 lbs (pair) - Greasible strap hinge, 3/16in thick steel, Powder coated, black - Strap Height: 3in - 3/8in Hex-head Lag Bolts included - Recommended Length = 1/3 - 1/2 door width - Requires 2in minimum ground clearance

- 85015 - 85024 - Sold individually - Max door weight: 600 lbs (pair) - Greasible strap hinge, 3/16in thick steel, Powder coated, black - Strap Height: 3in - 3/4in diameter, 8in long threaded ball bearing hinge bolt with nuts included - Length of Hinge Bolt (horizontal portion): 7 5/8in (approx.), with 5 5/8in threaded length (approx.) - 3/8in Hex-head Lag Bolts included

Signature SignatureMission Diamond Mission DiamondMission Rose Mission RoseSpade SpadeBean BeanSpear SpearOld World Old World

Length

Handing

Strap Height

Part Number

Length

Handing

Strap Height

Part Number

8in

LH

3”

85000

8in

LH

3”

85015

8in

RH

3”

85001

8in

RH

3”

85016

14in

LH

3”

85002

14in

LH

3”

85017

14in

RH

3”

85003

14in

RH

3”

85018

20in

LH

3”

85004

20in

LH

3”

85019

20in

RH

3”

85005

20in

RH

3”

85020

32in

LH

3”

85006

32in

LH

3”

85021

32in

RH

3”

85007

32in

RH

3”

85022

42in

LH

3”

85008

42in

LH

3”

85023

42in

RH

3”

85009

42in

RH

3”

85024

HANDING FOR STRAP HINGES HANDING FOR STRAP HINGES

High Load Gate Hinges

www.sederra.com

Rev10101032

www.sederra.com

Rev101010 33

hardw

arehar

dwar

e

Leversets

46000 Normandy Leverset

1000Napoli Leverset

1200Athena Leverset

1400Luzern Leverset

46001 Harrisburg Leverset

1100 Durango Leverset

46002San Carlos Leverset

762 - Single Cylinder, 1 1/2in thk door767 - Single Cylinder, 2 1/8in thk door





10325 - Single Cylinder, 2 1/2in max door thickness

763 - Double Cylinder, 1 1/2in thk door768 - Double Cylinder, 2 1/8in thk door





798 - Double Cylinder2 1/2in max door thickness

1300Arts and Crafts Leverset

- Flat black finish - Back plate: 2 5/8in x 4 3/8in - Wrought steel - 2 3/8in backset

- Flat black finish - Back plate: 2 5/8in x 4 3/8in - Wrought steel - 2 3/8in backset

- Suitable for exterior use - Passage (non-locking) - Includes spring latch (except dummy sets) - Includes strike plate to mount on jamb or post (except dummy sets) - Steel with matte black finish

- Suitable for exterior use - 2 3/8in backset

- Bronze with medium bronze finish - Finish will patina - Suitable for exterior use - 2 3/8in backset

- Stainless Steel - Suitable for exterior use - 2 3/8in backset

- Brass with oil-rubbed bronze finish - Suitable for exterior use - 2 3/8in backset

- Cast Solid Bronze - Very dark antique bronze - Suitable for exterior use

- Cover plate rotates for key access

- Brass with satin nickel finish - Suitable for exterior use - 2 3/8in backset

- Single: Thumbturn & Key - Double: Keyed both sides - EMTEK brand




- Single: Thumbturn & Key - Double: Keyed both sides - 2 3/8in backset


- Suitable for exterior use - Passage (non-locking) - Includes spring latch (except dummy sets) - Includes strike plate to mount on jamb or post

(except dummy sets)

- Backplate: ~2.5in x 2.5in - Suitable for exterior use - Passage (non-locking), 2 3/8in backset - Includes spring latch (except dummy sets) - Includes strike plate to mount on jamb or post

(except dummy sets) - Brass with Satin Nickel Finish

- Lost wax cast bronze with medium bronze finish - Suitable for exterior use - Passage (non-locking) - 2 3/8in backset - Includes spring latch (except for dummy sets)

- Brass with oil-rubbed bronze finish - Suitable for exterior use - Passage (non-locking) - 2 3/8in backset - Includes spring latch (except for dummy sets)

46003 Jamestown Knobset

46004Savannah Knobset

Deadbolts

- Stainless Steel

www.sederra.com

Rev10101034

www.sederra.com

Rev101010 35

har

dwar

efin

ishes

Emtek EmTouch Brass Keypad Deadbolt Brass, Flat Black

Emtek EmTouch Brass Keypad Deadbolt Brass, Satin Nickel

Emtek EmTouch Brass Keypad Deadbolt Brass, Oil Rubbed Bronze

900247

900230

900233

900263

900246

900231

900235

900264

900245

900232

900236

900241

Cortina Keypad Leverset, Emtek Oil Rubbed Bronze, Passage Mode

Triton Keypad Leverset, Emtek Satin Nickel, Passage Mode

Helios Keypad Leverset, EmtekFlat Black, Passage Mode

1110 - 1 1/2in thick door1111 - 2 1/8in thick door



Paint Gate: Custom Color, Semi-Gloss

Single Coat Application


Refinish Supply - based on gate size Quart or Gallon available

Refinish Supply - based on gate size Quart or Gallon available

Paint Gate:White, Semi-Gloss


Double Coat Application

Paint Gate: Black, Semi-Gloss


Double Coat Application

Smooth, booth sprayed application

1116

11261121

- Opens with a 4-digit user code - Create up to 20 unique user codes - Illuminated keypad and low battery indicator - 2 3/8” backset



- Oil Rubbed Bronze - Opens with a 4-digit user code - Create up to 20 unique user codes - Illuminated keypad and low battery indicator - 2 3/8” backset

- Satin Nickel - Opens with a 4-digit user code - Create up to 20 unique user codes - Illuminated keypad and low battery indicator - 2 3/8” backset

- Flat Black - Opens with a 4-digit user code - Create up to 20 unique user codes - Illuminated keypad and low battery indicator - 2 3/8” backset

FinishesEmtek Keyless Entry Paint Prefinished

Sealing Stains

Spar Urethane Clear CoatStain Only - DIY Finish

- Colors shown represent expected tonal variation when evenly applied to Western Red Cedar - Inherent cedar tonal variation includes but is not limited to the tones depicted below - As with any finish, these stains may require occasional re-coating - See Finish Boards for actual finish appearance - These Catalog images are not exact, but are intended to approximate factory finishes

- Due to transit restrictions based on VOC %, Sederra does not ship Sikkens Cetol products. - Sikkens products are available nationwide at retailers.

www.sederra.com

Rev10101036

www.sederra.com

Rev101010 37

operatorsoperator

s

Gate AutomationPackages

FAAC IN GROUND OPERATOR GTO 4000/4200XL ARMED OPERATOR

- Invisible, in-ground installation will not detract from gate

appearance

- Includes custom brackets for attaching to steel frame on Sederra

gate

- Two remote control transmitters, control panel with 14x16in

fiberglass enclosure, two batteries

- Maximum weight per gate leaf: 800 pounds

- Use for double swing gates 10ft to 20ft wide (total gate width)

- Exit wand & Photo Beams

- Can be setup for either In Swing or Out Swing, up to 110 degrees

- 13 second opening time

- AC transformer (2) 12V batteries

- Operator Arms

- Control box with two remotes

- 6’ power cable

- Exit wand & Photo Beams

- Double swing gates 11’-12’ wide: Gate and arm must be mounted

on same steel post

- Double gates over 12’ wide: Gate and arm can be mounted on

steel post or masonry column / wall

- Cannot be used on double gates less than 11’ wide (~5.5’ per leaf)

- Opens gate inward;

- Outswinging gate two additional brackets (sold separately)

required to swing outward

- Platinum Kit includes digital keypad and goose neck pedestal, and

Wireless Intercom System

- High grade stainless steel

faceplate and metal keypad

- Programmable codes with 3

strikes you’re out security

- Night Light

- 5.5h x 6.625w x 4.50d

- In ground gooseneck pedestal

- Ideal for drive up

communications

- Pedestal for mounting

communication intercom

- One open and one closed stop

included with each operator

- Dual operator comes with two

open stops and two closed stops

- Single piece buried motion sensor

- Detects moving vehicles for “free exit”

- 150’ lead in wire

- Dual button transmitters

- Rolling code transmitter to

prevent cloning of the signal

- 98’ range

- Receiver and transmitter provide

reliable all-weather sensing

- Safety device: senses

obstructions in gate path

when gate closing

- 2.75h x 3.75w x 1.75d

- One open and one closed stop

included with each operator

- Dual operator comes with two

open stops and two closed stops

- 1500’ Communication range

- Interior master station allows

for communication with

exterior intercom station

- Inside station includes a release

button to activate the

relay and open gate for accesss

- 6.75h x 5.00w x 1.75d

25100 20052

25101 20053

25102 20054

Accessories - FAAC

25001 25002 25003

25006 2500525009

25004

25007

ADV1000i Advantage DK with intercom Stand Alone Keypad

LEM-1DLK door / intercom Master Station

In Ground Pedestal Mount

Open Stop Carsense 202 SLIM 150 - Exit WandTransmitter XT4 433 RC

Photobeam Photo Eye

Closed Stop

www.sederra.com

Rev10101038

www.sederra.com

Rev101010 39

operator

sreso

urces

20003 2000720006

2001420004

20009

20107

Single Button Transmitter In-Ground PedestalDigital Keypad

Residential Wireless Intercom / KeypadGTO Photobeams

100ft Exit Wand

Solar Panel, Complete, 10 Watt, 600mA

Accessories - GTO

- Interior Intercom Base Station - Up to 4 (total) will work with each

Exterior intercom / keypad unit - Provides superior range, two-way

communication up to 500 feet

- 10 watt solar panel - Two recommended for adequate

power - For use with your operator when

power is greater than 1000 feet away

- Installed along the driveway on the inside of your property - Detects an approaching vehicle within

a 12 ft radius - Signals the GTO system gate opener to open - Provides “hands free” exiting of your

property

Dealer ResourcesProcess Reference

- Single Button Transmitter

- Adjustable Code Settings

- Safety device provides a “non-contact”

means of entrapment protection

- May be installed as a wireless system

- Programmable with up to 25 different

PIN codes

- Black Powder Coated Aluminum Pedestal

- Ideal for drive up communications

* DRIVEWAY GATES 10FT - 14FT TYPICALLY HAVE A 3-5 WEEK LEAD TIME

www.sederra.com

Rev10101040

www.sederra.com

Rev101010 41

resourcesre

sourc

es

Quick Reference / FAQ's

Handing for Hinges and Handle Sets

Installation Diagrams

Q: What dimensions are required when building a custom gate? A: We will need to know the height and width of your current opening, or the height and width of the gate you would like. We will determine the clearances for you and email the design for your review and approval before building. Q: How much clearance will I need on each side of the gate? A: The gap clearances for the gate hardware are determined for you based on the hardware that you order. Using a latch and butt hinges will have different clearances than say, using a handle set, deadbolt, and strap hinges. The recommended gap clearances are included in your gate specific design documents.

Q: How will my gate hold up to the environment? A: Western Red Cedar is widely known for its outstanding rot and insect resistance. To promote longevity, our gates feature:

- Clear grade, kiln-dried, Western Red Cedar provides superior dimensional stability. - A variety of metal art options such as castings, welded bar and precision profiled steel provide excellent

design flexibility and character. - Metal art options are finished with a protective powder coating. - Wood frame (arch, rails and stiles) is assembled using mortise and tenon joinery. - Panels are constructed with tongue and groove slats that float within the rail and stile framework,

preventing stress at the frame joints that result from normal expansion and contraction due to weather changes. - Tongue and groove slats prevent unattractive gaps which would appear on gates without tongue and

groove pieces. This type of construction also prevents the slats from rattling during use. - Interlocking construction eliminates the need for visible fasteners while increasing gate stability. - A variety of professional finishing options protect your gate from the elements.

Q: How is handing of a gate determined for hinges and handle sets? A: Refer to diagrams below for handing of strap hinges and handle sets. Although drop bar latches and butt hinges are not handed, we will want to know the handing for pre-installation services (e.g. Mortising for Butt hinges). So you could say, from the yard, the hinges are on the right and the handle is on the left and the gate swings towards the yard.

Installation diagrams can be found on http://sederra.com/miscinstallationdiagrams.asp On this page you can choose from the list to find your scenario and corresponding installation diagrams

Approximate Gate Width

Gate will be attached to: Gate will Swing Toward the:

Double Swing

Driveway Gates (Two

doors)

10ft to 14ft wide

Masonry Columns or Wall, using Receiver Plates Yard Street

Steel Post, exposed on all sides Yard Street

Steel Post, partially embedded in a Column or Wall Yard Street

Steel Post, set behind a Column or Wall Yard Street

14ft to 22ft wide

Steel Post, exposed on all sides Yard Street

Steel Post with Extension Arms, embedded in Column or Wall Yard Street

Steel Post, partially embedded in a Column or Wall Yard Street

Steel Post, set behind a Column or Wall Yard Street

Steel Plate, fastened to a Column or Wall Yard Street

Hinge Type Latch Type Gate will Swing Toward the:

Pedestrian and

Garden Gates

Butt HingeThumb Latches, Ring Turn Latches Yard Street

Leversets Yard Street

Standard Strap Hinges

Thumb Latches, Ring Turn Latches Yard Street


Medium Load Strap Hinges

Thumb Latches, Ring Turn Latches Yard Street


www.sederra.com

Rev10101042

www.sederra.com

Rev101010 43

resourcesre

sourc

es

Material, Finish & Warranty Material, Finish & Warranty

Western Red Cedar Gates and Outdoor Wood Products

Sederra gates and outdoor wood products are designed and constructed to last for many years provided the products are properly maintained. As with other outdoor woods, kiln dried Western Red Cedar should not be allowed to absorb excess moisture or to dry out excessively, otherwise the life and condition of the product will be compromised. A good sealing finish applied before the product is installed and reapplied as needed is

imperative to preserve the good condition of the product and to get the most life out of your Sederra product.

Sederra provides a one-year limited warranty to cover manufacturing defects.With proper care your product will last for many years to come.

Material DescriptionWOOD CHARACTERISTICS

Surface Characteristics: Sederra products are partially or entirely constructed from wood and may contain aspects that are considered inherent characteristics of

wood based products. These include, but are not limited to, knots, knot holes, minor splitting along the direction of the wood grain which does not impact the struc-

tural integrity of the structure, slight checking at board ends, twisting, cupping, small dents (less than 1/8in deep, less than 1/4in wide) and color variations. While

Sederra takes steps during the wood selection and manufacturing process to minimize and/or eliminate the occurrence of these aspects, completely preventing their

occurrence cannot be ensured and is not covered under warranty or considered a suitable reason for product return/credit.

Moisture Level: Sederra wood products are made from kiln dried material and upon receipt will have a moisture level conforming with industry standard specifica-

tions. While the products are outdoors and subject to weather variations, moisture levels can be impacted and the moisture content can vary.

Surface Finish: Although our products are sanded to a minimum of 80 grit, however, small dents may be visible. While Sederra takes steps during the manufacturing

process to minimize and/or eliminate their occurrence, completely preventing them cannot be ensured.

Color Variation: Western Red Cedar has natural variations in color and brightness. These variations include yellow, pink, red, and brown tones. The lightness of

each tone may vary as well. The tonal differences and contrast may be accentuated when a clear finish is applied. Finishes that are higher in pigment such as ‘semi-

transparent’ finishes may reduce the tonal differences.

Wood Grain: Sederra products are a mixture of both flat and vertical wood grain, known as mixed grain.

FINISHING and PREVENTATIVE MAINTENANCE

Sederra products are composed of Western Red Cedar, a type of wood that is typically considered suitable for outdoor purposes. Wood selection is based on dimen-

sional stability, weather resistance and rot resistance. Sederra wood products must be treated and maintained properly to increase longevity and structural stability.

These treatments include applying a suitable oil-based or water-based stain/product, or suitable water proofing product. Failure to provide proper preventative

maintenance to the wood products may cause excessive cracking, warping, cupping, end grain checking, and joint failure. Failure to provide preventative mainte-

nance of the wood, including sealing the surface of the wood to prevent excess moisture absorption and/or excessive drying, will void the warranty.

Painted Finish:

While paint color matching is generally accurate, it is not exact. Differences in ambient lighting as well as sheen levels (matte, semi-gloss, glossy) can affect the

appearance of the color. Color matching is done on a best effort basis, and slight differences from the color sample provided for color matching is not considered a

reason for return/credit. Painted gates are shipped with touch up paint. Over time, minor expansion and contraction in the tongue and groove slats can reveal an

unfinished portion of the ‘tongue’ portion of the tongue and groove. The touch up paint can be used to touch up this unfinished area. Gates that have been finished

with a sealer that contains pigment, such as outdoor wood semi-transparent stain, may also expose a portion of the tongue a result of slight shifting of the boards.

This type of occurrence is not covered by the product warranty. Due to the natural tonal variation of Western Red Cedar, the color of an unfinished, oil stained or

spar urethane finished gate may vary from board to board. Additionally, gates finished alike may show variation.

Warranty Description

This warranty extends to the original owner and is not transferable. Original owner is defined as the dealer/contractor/purchaser or the initial owner of the struc-

ture where the product is initially installed. The original dealer/contractor/purchaser acknowledges that he or she has read and understands the warranty, is bound

by its terms, and agrees to provide this warranty to the owner of the structure where the product is installed.

Warranty Period: 1 year from date of product receipt

What the Warranty Covers:Manufacturing defects, such as

- Frame joint separation - Excessive frame (stile, rail, arch) warp. The degree of acceptable warp is a function of gate width and height. To

determine the acceptance of warranty application, measurements related to the warp must be provided and will be assessed in terms of the impact on proper functioning of the gate. - Faulty powder coat adhesion on steel. Note: Chips in the powder coat from field use, which expose bare steel

must be repaired immediately with touch up paint or powder coat touch up to prevent corrosion from spreading. Powder coat adhesion issues caused by this condition and failure to prevent corrosion is not covered under warranty. - Faulty peeling of manufacturer applied paint finish on wood

Failure to provide preventative maintenance of the wood, including sealing the surface of the wood to prevent excessive moisture absorption and/or excessive drying, will void the one year warranty.

What the warranty will provide:If we determine that there is a defect, at our option we will repair the product, ship a replacement product to the dealer/distributor or person making the claim in the same specifications as the original product, or refund the original purchase price paid to us.

What conditions the warranty does not cover:Aspects defined as inherent to wood products as defined in the Material Description section above and:

- Moisture content - Unfinished areas of the tongue of tongue and groove boards that are exposed during slight shifting of the boards over time - Narrow gaps between tongue and groove boards that may appear as a result of impact to the product and/or moisture changes

This issue is generally resolved by shifting the tongue and groove slat boards back into position - Water stains and mildew, which may be, but is not entirely caused by, water wicking into the end grain of the wood - Damage that is caused by an impact, misuse of the product, and/or improper installation methods, vandalism, or an act of

nature. Misuse examples are, but not limited to, using the gate without solid post or jamb stops, using the gate without center stops for double gates, excessive weight applied to the end of gate, allowing gate to slam in heavy wind condition thereby creating a impact stress leading to fracture(s) within the structure, over opening or over closing the gate thereby creating a bind condition which may create an impact stress leading to fracture(s) within the structure. - Normal wear and tear and natural weathering of surfaces - Variations in the color or texture of the wood or finish - Surface cracks that are less than 3/64in (.05in) in width - Surface cracks from natural weathering that do not impact the overall structural integrity/strength of the product - Cracking of a manufacturer applied finish - Board end checks that are less than 1/8in in width and/or 12in in length - Problems related to improper field finishing of all surfaces, front and back and edges - Warp for any 5ft wide by 7ft tall by 2 1/8in, or smaller product, which does not exceed 3/8in in the plane of the product itself

Products taller and wider are not guaranteed for warp - Any costs associated with alterations, surface finishing and installation of the original product or replacement product - Structural integrity problems caused by improper field installation of the hardware, improper sizing of the product, or other

assembly issues - Hardware that is not provided by us, such as handles, hinges, locksets, etc - Discoloration or rusting of decorative metal accent options such as clavos, grills, metal art that is an integral part of the

product (e.g. window iron art in top portion of a gate).

- Cost for the labor, removal or disposal of the defective product.

How to Request Warranty Service:If you have a problem with your Sederra product, immediately upon discovery, contact the distributor or dealer from whom you purchased our product or contact us directly.

Contacting us directlyIf a defect is observed that is covered under the warranty, contact Sederra at [email protected] with a) an explanation of the observed problem, b) the date and retail location of purchase, c) any photos showing the observed condition, information on how to contact you, and where the product can be inspected. You will receive a reply within three business days after sending the email correspondence.

If it is found that the product does not have a defect covered by the warranty, we may charge an inspection fee for an onsite inspection that is required or requested.

If the claimed defect is a warp condition, we may defer replacing or repairing the product for a period of up to 12 months from the date the claim is received. A tem-porary warp condition may occur as the product adjusts to local temperature and humidity. The deferral period will not be considered part of the warranty period.

No dealer, distributor, or representative of Sederra products has the authority to change, modify or expand this warranty.

www.sederra.com

Rev101010 45

GATE CO

LLECTION

Scu

stomize

accessories

hardw

arefin

ishes

operatorsreso

urces

toc

Sederra

13780 SW Galbreath Dr

Building A

Sherwood OR 97140

Tel: 1-888-749-4283

Fax: 1-503-925-8910

[email protected] – www.sederra.com

2 0 1 2 P R O D U C T C ATA L O G

Documents

Building A Sherwood OR 97140 - Sederra Sederra Catalog.pdf · Building A Sherwood OR 97140 Tel: 1-888-749-4283 Fax: ... Archtop. L 6 Re101010 L ... building. Sherwood OR 97140