Building SSR 2007 08

GOVERNMENT OF ANDHRA PRADESH

BUILDING –SSR: 2007-2008

COMMITTEE OF CHIEF ENGINEERS

1

STANDARD SCHEDULE OF RATES

FOR

BUILDING WORKS

FOR THE YEAR 2007-2008 (Effective from 1st June, 2007)

ALL ENGINEERING DEPARTMENTS

2

Office of the Chief Engineer (R&B)Buildings, R&B Deparment., Errum manzil, Hyderabad.

Procs.No.CEB/TA8/AEE3/SSR/2008/ , Dt:27-07-2007.

Sub:- Printing of Building-SSRs for all Engineering Departments specific to the functioning of Building works – Building-SSR:2007-08 – Communication of Building-SSRs – Reg.,

Ref:- 1. G.O.Rt.No.471, T,R&B (R.1) Dept., dt:20-04-2007.2. Minutes of Committee of Chief Engineers meeting for Building-SSRs held on Dt: 23-7-2007.

* * * * *

The Government of Andhra Pradesh have constituted a Committee of Chief Engineers of Engineering

departments dealing with Building works for finalizing and communicating Building-SSR (Civil & Electrical) vide

G.O. 1st cited. In accordance therewith the Committee of Chief Engineers has finalized and approved the

Building-SSR: 2007-08 in the Minutes of Meeting held on 23-7-2007.

The rates for the Building items (Civil and Water Supply & Sanitary & Electrical items) are to be followed

henceforth by all the concerned departments for building works. The rates of Labour Rates, Common Material &

Work items, Public Health items, Conveyance Rates of Materials & Hire charges of Common SSR-2007-08

remain unchanged. No other items other than the items communicated in this Building-SSR shall be introduced.

The Heads of Departments mentioned below are authorized to print the Building-SSR: 2007-08. The

unauthorized printing & selling of the Building-SSR is strictly prohibited.

The revised rates will come into force with immediate effect.

The receipt of the proceedings may please be acknowledged.

Sd/-M.Gangadharam (27.5.2007)Chief Engineer (R&B) Buildings

Convener-Member, Committee of Chief Engineers- Building-SSR

To

1. Engineer-in-Chief (Admn.)., Roads & Buildings Department.2. Engineer-in-Chief (I&CAD)., Irrigation Department.3. Engineer-in-Chief (P.H.), Public Health Department.4. Engineer-in-Chief (P.R.), Panchayat Raj Department.5. Chief Engineer (Roads), R&B Department.6. Chief Engineer (NH), R&B Department.7. Chief Engineer(Panchayat Raj) 8. Chief Engineer(AP Housing Board) 9. Chief Engineer, Greater Hyderabad (MCH) 10. Chief Engineer(AP Housing Corporation) 11. Chief Engineer(APSRTC) 12. Chief Engineer(APHMHIDC) 13. Superintending Engineer (R&B), Head Quarters Circle, Hyderabad14. Superintending Engineer (R&B), Electrical Circle, Hyderabad

3

INDEX

Sl. No:

DESCRIPTION Page No:

From To

BUILDING – SSR:2007-08

1 Preamble of Building-SSR-2007-08 5 6

2 Building Items - Building-SSR-2007-08 7 64

3 Water Supply & Sanitary Items - Building-SSR-2007-08 65 91

4 Electrical Items – Building-SSR-2007-08 92 127

COMMON – SSR:2007-08

5 Preamble of Common SSR – 2007-08 128 136

6 Labour Rates - Common SSR – 2007-08 137 140

7 Common Material & work Items - Common SSR–2007-08 141 154

8 Building Items – Common-SSR-2007-08 DELETED

9 Water Supply & Sanitary Items – Common-SSR-2007-08 DELETED

10 Public Health Items - Common SSR – 2007-08 156 225

11 Conveyance Rates of Materials - Common SSR – 2007-08 226 232

12 Hire Charges - Common SSR – 2007-08 233 236

ANNEXURE

13Seigniorage Charges – Extract of G.O. Ms. No: 217 Ind. & Comm (M1) Dept dt. 29.9.2004

237 240

14Extract of G.O. Ms. No: 134 Irrigation& CAD (PW: COD) Dept. dt. 25.11.2002 on Adoption of Machinery rates for Earthwork

241 241

15Extract of G.O. Ms. No: 471 T,R&B (R1) Dept. dt. 24.04.2007 on Constitution of Committee of Chief Engineers for Building:SSR

242 242

4

PREAMBLE

5

1.0 INTRODUCTION

The Government have issued orders vide G.O. Rt. No: 471 TR&B (R-1) Dept., Dt. 20.4.2007

constituting a Committee comprising of Chief Engineers of departments in-charge of execution of

building works for finalization of SSR for both Electrical Civil items specific to the functioning of

building works. The 1st - Meeting of the above “SSR Committee for Buildings (Civil & Electrical)”

was convened on 23.7.2007 with an objective to finalize and release of Building-SSR: 2007-08.

2.0 APPLICABILITY OF COMMON SSR

The rates of Labour Rates, Common Material & Work items, Public Health items, Conveyance

Rates of Materials & Hire charges of Common SSR-2007-08 remain applicale. The specifications,

stipulations & all other conditions of Common-SSR other than specified in this context remain

applicable.

3.0 RATES

It is observed that the raw material rates of certain items are varying across the state

considerably owing to the availability of natural resources, geographical & physical conditions. It

may be difficult to justify common rates in such circumstances, hence it is reiterated that the rates

recommended in the Building SSR-2007-08 are ceiling rates and are purely for guidance for the

officers for preparation of estimates vide Para 113 of APPWD code. Authority who prepares the

estimate is however responsible for proper rates as envisaged in Para 45 of APPWD code.

Supply Rates for all the materials are based on market rates plus Sales Tax/ VAT. Composite

tax on finished items may be allowed as applicable.

4.0 ELECTRICAL ITEMS

It is decided to retain and approve the rates and items already approved and communicated

vide Electrical SSR 2006-07 and include the same in the Building SSR: 2007-08. The labour rates

approved in the Common SSR: 2007-08 will be applicable to the Electrical labour items.

6

BUILDING ITEMS

7

Building Items

BUILDING ITEMS

S.No

Details UnitS S RATE

FOR 2007-08

1 2 3 4 IV . RATES OF MATERIALS (A) BRICKS & TILE PRODUCTS 1 Bricks second class or ground moulded (Non-Modular or

traditional size) 23 x 11 x 7 cm1000 Nos 2000.00

2 - do- modular size 19 x 9 x 9 cm 1000 Nos 2700.00 Flyash cement/lime solid blocks with compressive

strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5

3 290 x 225 x 140 mm Each 13.004 290 x 200 x 140 mm Each 11.005 290 x 150 x 140 mm Each 8.006 290 x 112/100 x 140 mm Each 7.007 225 x 100 x 60 mm Each 3.008 145 x 225 x 140 mm Each 7.509 145 x 200 x 140 mm Each 6.00 Flyash cement/ lime solid blocks with compressive

strength of 50 kg/sq.cm - IS:12894-1990 - CLASS - 5

10 290 x 225 x 140 mm Each 11.0011 290 x 200 x 140 mm Each 9.0012 290 x 150 x 140 mm Each 6.0013 290 x 112/100 x 140 mm Each 5.0014 225 x 100 x 60 mm Each 2.5015 145 x 225 x 140 mm Each 6.0016 145 x 200 x 140 mm Each 5.0017 Cinder 1 Cum 450.00 Supply of ‘AEROCON’ HQ building Blocks &

‘COMFORTILE-Thermal Roof Tile’

A. AEROCON – HQ BUILDING BLOCKS 18 600 x 200 x 75 mm Each 30.0019 600 x 200 x 100 mm Each 41.0020 600 x 200 x 125 mm Each 48.0021 600 x 200 x 150 mm Each 56.0022 600 x 200 x 200 mm Each 76.0023 600 x 200 x 230 mm Each 88.00 B. COMFORTILE -Thermal Roof Tile

24 300 x 200 x 50 mm Each 12.00 Supply & fixing of AEROCON PANELS

25 Supply & fixing of 50mm thick Aerocon sandwich Panels having Tongue and Groove joint for partitions and walls using G.I. Flooring & Ceiling channels, hardware, Labour, transportation, wastages, etc., as a complete item of work excluding finishing, fittings & fixtures.

Sqm. 1111.00

26 Supply & fixing of 75mm thick Aerocon sandwich Panels having Tongue & groove joint for partitions And walls using G.I. Flooring & Ceiling channels, hardware, Labour, transportation, wastages, etc., As a complete item of work Excluding finishing, fittings & fixtures

Sqm. 1241.00

AEROCON PANELS 27 50mm thick x 600mm standard width x 2400mm, 2700mm &

3000mm lengths1 Sqm. 784.00

8

Building Items

S.No


FOR 2007-08

28 75mm thick x 600mm standard width x 2400mm, 2700mm & 3000mm lengths

1 Sqm. 1045.00

CUDDAPAH/SHAHABAD STONES 29 Cuddapah/Shahabad slab 40 mm thick and size not less than

0.457 M x 0.457 M1 Sqm 110.00

30 Cuddapah/Shahabad slab 50 mm thick and size not less than 0.457 M x 0.457 M

1 Sqm 123.00

Shahabad Stone slab of Tandur 25.4 mm thick 31 White 10 Sqm 823.0032 Blue 10 Sqm 889.00 Shahabad Stone slab of Tandur 50.8 mm thick

33 White 10 Sqm 941.0034 Blue 10 Sqm 1072.00 Polished Shahabad stone slab 25.4mm thick

(0.457 X 0.304) or any other size as specified 35 White 10 Sqm 1601.0036 Blue 10 Sqm 2026.0037 Polished black Kadapa slabs 25.4 mm thick (0.457x 0.457M) 10 Sqm 1509.0038 Polished Bethamcherla white stone 25.4 mm thick (0.254M

x0.254M)10 Sqm 3953.00

39 Polished Bethamcherla colored stone 25.4 mm thick (0.254M x0.254M)

10 Sqm 4214.00

40 High Polished Granite 18 to 20 mm thick up to 8'-00 (2.43 M) other than black/ premium colours

1Sqm 2008.00

41 High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black

1Sqm 1764.00

42 High Polished Granite 18 to 20 mm thick up to 8'-00 (2.43 M) black

1Sqm 1647.00

43 High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) black

1Sqm 1490.00

44 Rounding the edges of Kadapa Slabs and Shahabad stone slabs including polishing the same.

1 Rm 33.00

45 Rounding the edges of Marble slabs including polishing the same.

1 Rm 83.00

46 Rounding the edges of Granite slabs including polishing the same.

1 Rm 98.00

47 Flat nosing to Kadapa slabs and Shahabad stone slabs 40mm thick

1 Rm 5.00


1 Rm 6.00


1 Rm 7.00


1 Rm 8.00

FLOORING SLABS/ TILES 51 Dongari Adanga marble slab polished 18 mm to 20 mm

(average ) thick (size 0.457 M x 0.457 M)/ (0.6M x 0.6M)1 sqm 535.00

52 Dongari Adanga marble slab polished 16 mm to 20 mm (average ) thick (size 0.457 M x 0.457 M)/ (0.6M x 0.6M)

1 sqm 475.00

53 Dongari Adanga marble slab polished 18 mm to 20 mm (average ) thick 0.305 M x 0.305 M

1 sqm 446.00

9

Building Items

S.No


FOR 2007-08

54 Dongari Adanga marble slab polished 16 mm to 20 mm (average ) thick 0.305 M x 0.305 M

1 sqm 386.00

55 Dongari Adanga marble slab polished 18 mm to 20 mm (average ) thick ( 0.610 M width of any length).

1 sqm 713.00

56 Dongari Adanga marble slab polished 16 mm to 20 mm (average ) thick ( 0.610 M width of any length)

1 sqm 653.00

57 Marble Tiles polished 8 mm thick 1 sqm 309.0058 Cutting marble slabs up to 50 mm thick by mechanical device. 1 RM 6.0059 Granite stone tiles 8 mm thick ( mirror polished of all shades) 1 sqm 665.0060 Ceramic tiles 7.3mm thick 1st quality of all shades ( as per

manufacture specification)1 sqm 356.00

61 Chequered Terrazzo tiles of 22 mm thick (Medium shade) 0.254 M x 0.406 M

1 sqm 208.00

62 Chequered Terrazzo tiles of 22 mm thick (Dark shade) 0.254 M x 0.406 M

1 sqm 190.00

63 Chequered Terrazzo tiles of 30 mm thick ( Light shade) 0.305 M x 0.305 M

1 sqm 190.00

64 Chequered Terrazzo tiles of 30 mm thick (Dark shade) 0.305 M x 0.305 M

1 sqm 202.00

65 Chequered Terrazzo tiles of 30 mm thick ( medium shade) 0.305 M x 0.305 M

1 sqm 178.00

66 Decorated white background glazed tiles 200 mm x 152 mm 1 sqm 437.0067 Decorated coloured background glazed tiles 200mm x 300 mm 1 sqm 488.0068 Fantasy Glazed Tiles size 200mm x152 mm 1 sqm 462.0069 White glazed Tiles of any size Ist quality 1 sqm 267.0070 Glazed coloured Tiles of any size Ist Quality 1 sqm 316.0071 Precast Terrazzo Tiles 20 mm thick ( Medium shade) 1 sqm 216.0072 Precast Terrazzo Tiles 20 mm thick (dark shade) 1 Sqm 210.0073 Supply & Fixing precast Terrazzo Tiles Marbleite in white &

colour vains 20 mm thick1 Sqm 227.00

74 a) Fixing charges only 1 Sqm 19.0075 b) Polishing charges only 1 Sqm 25.0076 c) Wax polishing charges only. 1 Sqm 15.0077 Supply & Fixing precast Terrazzo Tiles Marbleite in white tiles

20 mm thick1 Sqm 176.00

78 a) Fixing charges only 1 Sqm 19.0079 b) Polishing charges only 1 Sqm 25.0080 c) Wax polishing charges only. 1 Sqm 15.0081 Supply & fixing Terrazzo tiles 20 mm thick grey tiles 1 Sqm 102.0082 a) Fixing charges only 1 Sqm 19.0083 b) Polishing charges only 1 Sqm 25.0084 c) Wax polishing charges only. 1 Sqm 15.00

Supply & fixing of Crazy Marble flooring 85 Marble powder 1 Kg 2.0086 Marble chips 1 Sqm 405.0087 Mosaic chips 1 Sqm 2292.0088 Grinding, Polishing, electricity charges 1 Sqm 81.0089 Vitrified polished floor tiles 800x800x10 mm thickness premium

type 1st quality1 Sqm 1074.00

90 Vitrified polished floor tiles 600x600x8mm thickness premium colour 1st quality.

1 Sqm 950.00

10

Building Items

S.No


FOR 2007-08

91 Vitrified polished floor tiles 600x600x8mm thickness normal colour 1st quality.

1 Sqm 832.00

92 Vitrified polished floor tiles 400x400x7mm thickness normal colour 1st quality.

1 Sqm 618.00

93 Providing Bisazza glass Tiles Group 1 series or equivalent quality 20x20x4 mm thick to be applied on sponge finish plastered surface using laticrete or equivalent thin set polymer based adhesive.

1 Sqm 1535.00

(C ) TIMBER AND ROOFING MATERIALS TEAK WOOD Note: Before proposing the Teak Wood Items, the

estimating authorities shall obtain prior approval from the competent authority

94 Teak wood scantlings below 2 meters First class 1 cum 84633.0095 Teak wood scantlings below 2 meters Second class 1 cum 68358.0096 Teak wood scantlings above 2 meters First class 1 cum 87888.0097 Teak wood scantlings above 2 meters Second class 1 cum 71613.0098 Teak wood planks of all sizes First Class 1 cum 77196.0099 Teak wood Planks of all sizes second class. 1 cum 63653.00

100 Burma Teak wood scantlings below 2 meters 1 cum 103118.00101 Burma Teak wood scantlings above 2 meters 1 cum 106894.00102 Burma Teak wood planks 0.15m to 1 m 1 cum 110308.00103 Assam Teak Wood frames 1 cum 27265.00104 Assam Teak Wood Planks 1 cum 33264.00105 Sal Wood Frames 1 cum 31900.00106 Sal Wood Planks 1 cum 36258.00

GALVANIZED IRON SHEETS 107 Plain or Corrugated Galvanized iron sheets as per IS 277 (0.1

mm to 0.8 mm thickness)1 kg 43.00

108 Country Nails 1 Kg 34.00109 Wire Nails 1 Kg 34.00110 Mild Steel Tubes & pipes of all diameters as per IS-1161 1 MT 38000.00

Labour charges for Iron Fabrication works 111 a. Labour charges for fabricating steel works like Window

Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, excluding cost of fixing in position

1 Kg 10.00

112 b. Labour charges for fixing Iron Doors, Iron Windows and Window Grills in position

1 Kg 2.00

113 c. Labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc excluding cost of fixing in position

1 Kg 8.00

114 d. Labour charges for fixing heavy iron grills, Trusses, Stanchions, Heavy Beams and Girders erecting in position and fixing by using chain pulley blocks, Derek pole arrangements and cranes etc., complete in position

1 Kg 5.00

115 Stainless Steel Tubes, sections & pipes of all sizes & diameters for railings

1 Kg 130.00

116 Labour charges for Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish

1 Kg 65.00

117 labour charges for fabrication of reinforcement including 1 Kg 6.00

11

Building Items

S.No


FOR 2007-08

bending and placing at site in position including cost of binding wire

Galvanized Steel Barbed wire 118 I.O.A. 12 Gauge 1 Kg 35.00119 I.O.A. 14 Gauge 1 Kg 34.00120 Supply & fixing of Rolling shutter made of 80 x 1.25 mm

machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108

1 Sqm 1711.00

121 Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer etc., complete for finished item of work as per special spn 1105

1 Sqm 1485.00

(D) DOOR FITTINGS 1) TOWER BOLTS AS PER IS 204 BRASS

122 100 mm Long Each 56.00123 150 mm Long Each 83.00124 200 mm Long Each 111.00125 250 mm Long Each 138.00126 300 mm Long Each 170.00

ALUMINIUM 127 75 mm Long Each 35.00128 100 mm Long Each 42.00129 150 mm Long Each 51.00130 200 mm Long Each 64.00131 250 mm Long Each 76.00132 300 mm Long Each 89.00

MILD STEEL (POWDER COATED) 133 100 mm Long Each 13.00134 150 mm Long Each 20.00135 200 mm Long Each 28.00136 250 mm Long Each 38.00137 300 mm Long Each 47.00

2) BUTT HINGES AS PER IS : 205 BRASS

138 75 mm Long Each 24.00139 100 mm Long Each 77.00140 125 mm Long Each 93.00141 150 mm Long Each 123.00

ALUMINIUM

12

Building Items

S.No


FOR 2007-08

142 75 mm Long Each 50.00143 100 mm Long Each 60.00144 125 mm Long Each 71.00145 150 mm Long Each 71.00

MILD STEEL (POWDER COATED) 146 75 mm Long Each 6.00147 100 mm Long Each 12.00148 125 mm Long Each 17.00149 150 mm Long Each 23.00

3) DOOR HANDLES AS PER IS:208 ALUMINIUM 150 75 mm Long Each 33.00151 100 mm Long Each 38.00152 125 mm Long Each 56.00153 150 mm Long Each 63.00

MILD STEEL (POWDER COATED) 154 125 mm Long Each 17.00155 150 mm Long Each 25.00

ALDROPS AS PER IS:2681 BRASS

156 300 mm long Each 500.00 ALUMINIUM 157 200 mm long Each 148.00158 250 mm long Each 176.00159 300 mm long Each 191.00

MILD STEEL (POWDER COATED) 160 200 mm long Each 59.00161 250 mm long Each 77.00162 300 mm long Each 92.00

5)FLAT LATCHES BRASS

163 Door Stoppers Each 100.00164 Windows Stay Each 114.00

ALUMINIUM 165 200 mm long Each 71.00166 250 mm long Each 81.00167 300 mm long Each 85.00

MILD STEEL (POWDER COATED) 168 250 mm long Each 29.00169 300 mm long Each 37.00170 Door Stoppers Each 25.00171 Supply & fixing drapery rods (25.4 mm) 1" x 21 G Powder

coated with PVC ringsRft 20.00

172 Supply & fixing drapery bracket - brass powder coated pair 229.00173 Brass Aldrop heavy duty 350 mm Each 962.00174 Brass Aldrop heavy duty 450 mm Each 1370.00175 Aluminium Aldrop 350 mm ISI marked IS 204 Each 240.00176 Aluminium Aldrop 450 mm ISI marked IS 204 Each 304.00177 Deluxe window stay Aluminium Each 65.00178 Heavy duty Aluminium Door stopper Each 28.00179 Brass fancy handles 150 mm Each 170.00

13

Building Items

S.No


FOR 2007-08

180 Brass fancy handles 200 mm Each 231.00181 Brass fancy handles 250 mm Each 416.00182 Brass fancy handles 300 mm Each 532.00183 Brass fancy handles 450 mm Each 831.00184 Door closer automatic hyper brand IS 3564 Each 696.00185 Double action brass plate floor spring Hyper brand IS 6315 Each 881.00186 Providing and fixing Floor spring 1st Quality for Aluminium door Each 2202.00187 Heavy duty mortice lock 6/7 levers with PC or CP handles

complete setEach 431.00

188 Heavy duty mortice lock 6/7 levers with brass heavy handles Each 1501.00189 Brass latch heavy 300 mm Each 315.00190 Brass latch heavy 350 mm Each 362.00191 Brass latch heavy 450 mm Each 478.00192 Friction stay hinges for windows Each 59.00193 Keyless lockset for toilet with CP or PC handles (complete set) Each 170.00194 Keyless lock set for toilet with brass handles Each 452.00

(E) MISCELLANEOUS ITEMS 195 Aluminium sheet 24 Gauge 1 Sqm 218.00196 7.5mm thick Aluminium Grill (as approved by the department)

3.58 Kg/Sqm.1 Sqm 804.00

197 Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1" (25.4 mm ) thick 1 Sqm 671.00198 Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1/2" (12.7 mm ) thick 1 Sqm 384.00

Expanded metal sheets as per IS-412-1962 a. Light Weight

199 25 mm(SWM)x75 mm (LWM)3.25 mm Wide and 1.25 mm thick 1 Sqm 90.00200 20 mm(SWM)x60 mm(LWM) 2.50 mm Wide and 1.25 mm thick 1 Sqm 90.00201 20 mm(SWM)x50 mm(LWM) 2.50 mm Wide and 1.25 mm thick 1 Sqm 90.00

b. Medium Weight 202 25 mm(SWM)x75 mm(LWM) 3.25 mm Wide and 1.60 mm thick 1 Sqm 124.00203 20 mm(SWM)x60 mm(LWM) 2.50 mm Wide and 1.60 mm thick 1 Sqm 124.00204 20 mm(SWM)x50 mm(LWM) 2.50 mm Wide and 1.60 mm thick 1 Sqm 124.00

c. Heavy Weight 205 25 mm(SWM)x75 mm(LWM) 3.25 mm Wide and 2.24 mm thick 1 Sqm 142.00206 20 mm(SWM)x60 mm(LWM) 2.50 mm Wide and 2.24 mm thick 1 Sqm 142.00207 20 mm(SWM)x50 mm(LWM) 2.50 mm Wide and 2.24 mm thick 1 Sqm 142.00208 GI (M.S) fly proof wire mesh 16 x 20 gauge 1 Sqm 135.00209 SS fly proof mesh 1 Sqm 327.00210 Chain link mesh 8 gauge 2" x2" (50.8 mm x 50.8 mm) 1 Sqm 156.00211 Chain link mesh 8 gauge 3" x 3" (76.2 mm x 76.2 mm) 1 Sqm 106.00212 Chain link mesh 8 gauge 4"x4" (101.6 mm x 101.6 mm) 1 Sqm 90.00213 Rabbit wire mesh (chicken mesh) 1 Sqm 10.00214 Providing Tar felting roof repairs duly applying one coat of

appropriate grade of bitumen in hot condition @ 1.2 Kg/1Sqm of roof area, fixing tar felt (Manufactures to IS 1322/1972 specification), applying second coat of appropriate grade of hot bitumen at 1.20 Kg/1Sqm of roof area and spreading course aggregate (sand) at 0.063 cum per 1 Sqm of roof area finished item

1 Sqm 143.00

215 Providing waterproofing treatment by supplying and applying ROOFSHIELD-1500 OR EQUIVALENT (1.50 mm thickness, 2.25Kg per Sq. Mt and 20 X1 Mtr. roll with a centre core of 90 micron thickness HMHDPE film) Water Proofing Membrane.A) apply one coat of Bituminous Emulsion, first coat

1 Sqm. 212.00

14

Building Items

S.No


FOR 2007-08

of bituminous grade 85/25, fix "ROOFSHIELD-1500 OR EQUIVALENT" water proofing membrane, apply second coat of Bitumen grade 90/15 after sealing all the joints and abutments with a Gas torch and apply one coat of BITUMINOUS ALUMINIUM PAINT for heat resistance for finished item

216 Supply, laying & fixing of 60mm thick cement Mosaic reflective concrete pavers from "Super decorative floorings" make of grade M-40 and above including labour charges, loading & unloading, laying to desired lines and levels complete. However cement, sand, water, electricity etc shall be provided by you free of cost at site.

1 Sqm. 581.00

217 Supply, laying & fixing of 30mm thick cement Mosaic reflective concrete pavers from "Super decorative floorings" make of grade M-40 and above including labour charges, loading & unloading, laying to desired lines and levels complete. However cement, sand, water, electricity etc shall be provided by you free of cost at site.

1 Sqm. 522.70

WATER PROOFING & CONSTRUCTION CHEMICALS AND EPOXIES

Any company make As per I.SI. Standards, First Quality Rate

A) Concrete Admixtures and Plasticizers Conflow SNP1 or Equivalent

218 Pack size 1 litre 1 litre 38.60 Conflow SNP20 or Equivalent 219 Pack size 1 litre 1 litre 48.60

Conflow SNPA or Equivalent 220 Pack size 1 litre 1 litre 63.40

B) Super Plasticizers Conflow SNS I OR EQUIVALENT. 221 Pack size 1 Ltr Ltr 48.60

Conflow SNS 2 OR EQUIVALENT. 222 Pack size 1 Ltr Ltr 48.60

Accelerating Plasticizers Conflow SNA OR EQUIVALENT.

223 Pack size 1 Ltr Ltr 60.50 Retarding Plasticizers Conflow SNR OR EQUIVALENT.

224 Pack size 1 Ltr Ltr 38.60 Air Entraining Agents Conflow SNE OR EQUIVALENT.

225 Pack size 1 Ltr Ltr 38.60 Retarding super Plasticizers Conflow SNS3 SPL OR EQUIVALENT

226 Pack size 1 Ltr Ltr 48.60 Conflow SNS3 OR EQUIVALENT

227 Pack size 1 Ltr Ltr 63.40 Mortar Plasticizers Morflow SN1 OR EQUIVALENT

228 Pack size 1 Ltr Ltr 18.40 Integral Water Proofing compounds

15

Building Items

S.No


FOR 2007-08

Conflow SNW1 OR EQUIVALENT 229 Pack size 1 Ltr Ltr 56.00

Conflow SNW2 OR EQUIVALENT 230 Pack size 25 Kg Kg 8.30231 Pack size 750 Gms Pack 10.20

Block Admixtures Conflow SNB OR EQUIVALENT

232 Pack size 1 Ltr Ltr 19.30 Sprayed Concrete Accelerators Shotset SN1 OR EQUIVALENT

233 pack size 250 Kg. Kg 19.30 B) Concrete surface Treatments curing compounds CURAID SN1 OR EQUIVALENT

234 Pack size 1 Ltr Ltr 48.60 CURAID SN2 OR EQUIVALENT

235 Pack size 1 Ltr Ltr 50.50 Formwork & Mould Treatment Shutterol SNU OR EQUIVALENT

236 Pack size 1 Ltr Ltr 48.70 Cleaning Agents Uniklen SN1 OR EQUIVALENT

237 Pack size 1 Ltr Ltr 20.20 Uniklen SN2 OR EQUIVALENT

238 Pack size 1 Ltr Ltr 45.00 Uniklen SN3 OR EQUIVALENT

239 Pack size 1 Ltr Ltr 107.50 C)Free flow - Non shrink Grounts Pre – Packed Cementitious Grouts Expacrete SN 50 OR EQUIVALENT

240 Pack size 25 Kg Kg 8.30 Expacrete SN 70 OR EQUIVALENT

241 Pack size 25 Kg Kg 10.20 Expacrete SN 90 OR EQUIVALENT

242 Pack size 25 Kg Kg 15.70 Expacem SN 2 OR EQUIVALENT

243 Pack size 250 gm pack 23.80 Epoxy Resin Grouts Expacrete SNE 1 OR EQUIVALENT

244 Pack size 1 Kg Kg 510.30 Expacrete SNE 3 OR EQUIVALENT

245 Pack size 15 Kg pack 1944.00 Polyester Resin Grouts Anchrset SN1 OR EQUIVALENT

246 Pack size 1 Kg pack 121.50 Anchrset SN2 OR EQUIVALENT

247 Pack size 10 Kg pack 1142.10 D) Industrial Flooring systems Floor Hardeners Flortop SNC OR EQUIVALENT

248 pack size 25 Kg Kg 19.30 Floor top SNS OR EQUIVALENT

16

Building Items

S.No


FOR 2007-08

249 Pack size 25 Kg. Kg 11.90 Epoxy Floor coating & protective coatings Procoat SNF or Equivalent

250 Pack size 1 Kg Pack 403.40 Procoat SNS or Equivalent

251 Pack size 1 Kg Pack 335.30 Essenputty SNE or Equivalent

252 pack size 1 Kg Pack 204.10 Procoat SNZ or Equivalent

253 Pack size 1 Ltr Pack 486.00 Procoat SNL or Equivalent

254 Pack size 2.5 Kg. Pack 704.70 Epoxy Self Levelling (Flooring system) Flortop SNSL or Equivalent

255 Pack size 14 Kg Pack 2818.80 Flortop SNSL (SPL) or Equivalent

256 Pack size 14 Kg Pack 2148.10 Heavy Duty Epoxy Base (Flooring system) Flortop SNM or Equivalent

257 Pack size 16 Kg Pack 1142.10 Flortop SNFM or Equivalent

258 Pack size 16 Kg Pack 874.80 Epoxy resin primer Florcoat SNP or Equivalent

259 Pack size 1 Kg Pack 486.00 Procoat SNC or Equivalent

260 pack size 3 Kg Pack 806.80 Procoat SNP or Equivalent

261 pack size 1 Kg Pack 470.90 Procoat SNP2 or Equivalent

262 pack size 3 Kg Pack 845.60 E) Repair Products Repcrete SNC or Equivalent

263 Pack size 25 Kg Kg 11.90 Repcrete SNE1 or Equivalent

264 Pack size 16 kg Pack 1341.40 Repcrete SNW Primer or Equivalent

265 Pack size 1 Kg Pack 670.70 Repcrete SNW Mortar or Equivalent

266 Pack size 1 Kg Pack 189.50 Uniplug SN or Equivalent

267 pack size 5 Kg Kg 25.70 F) Water Proofing Systems Aqua coat SNF or Equivalent

268 Pack size 15+5 Kg Pack 1477.40 Water Repellents Aquarepel SN1 or Equivalent

269 Pack size 1 Ltr Ltr 45.90 G) Adhesive Tile Adhesives Tilegrip SNU or Equivalent

270 Pack size 15 Kg Kg 15.70

17

Building Items

S.No


FOR 2007-08

Bonding Adhesives Conbond SNA or Equivalent

271 Pack size 1 Ltr Ltr 204.10 Conbond SNE or Equivalent

272 Pack size 1 Kg Pack 558.90 Note: Literature for usage / application of above

construction /water proofing materials, epoxies etc, will be obtained from manufacturers.

BITUMINOUS HOT SEALING COMPOUND 273 Grade 'A' I.S.I excluding ST 1 Kg 22.00274 Bitumen solution primer of approved quality 1 Kg 36.00275 Tar Felt Type - 2 Grade - 1 1 sqm 64.00

GLASS - SAINT GOBIAN / MODIGUARD OR EQUIVALENT 276 Plain Float Glass 4 mm thick 1 sqm 290.00277 Plain Float Glass 5 mm thick 1 sqm 371.00278 Plain Float Glass 6 mm thick 1 Sqm 400.00279 Plain Float Glass 8 mm thick 1 Sqm 620.00280 Plain Float Glass 10 mm thick 1 Sqm 730.00281 Plain Float Glass 12 mm thick 1 Sqm 910.00282 Tinted - Bronze/ Green Glass 4 mm thick 1 sqm 453.00283 Tinted - Bronze/ Green Glass 5 mm thick 1 sqm 570.00284 Tinted - Bronze/ Green Glass 6 mm thick 1 Sqm 550.00285 Tinted - Bronze/ Green Glass 8 mm thick 1 Sqm 690.00286 Tinted - Bronze/ Green Glass 10 mm thick 1 Sqm 800.00287 Tinted - Bronze/ Green Glass 12 mm thick 1 Sqm 1280.00288 Pin headed Glass 4 mm thick 1 sqm 216.00289 Pin headed Glass 5 mm thick 1 sqm 301.00290 Frosted / Ground Glass 4 mm thick 1 sqm 466.00291 Frosted / Ground Glass 5 mm thick 1 sqm 591.00

Labour charges for Glass designing works on any thickness of Glass including fixing at site

292 Etching works 1 Sqm 323.00293 Reverse Etching work 1 Sqm 430.00294 Acid wash works 1 Sqm 538.00

CEMENT JALI 295 25 mm thick 1 sqm 126.00296 40 mm thick 1 sqm 163.00297 50 mm thick 1 sqm 223.00

BRUSHES 298 Wire Brush Each 26.00299 Soft Brush Each 118.00

DISTEMPERS 300 Dry Powder Distemper 1 Kg 25.00301 Oil Bound Washable Distemper Acrylic Based 1 Kg 65.00

POLISH 302 French Spirit Polish 1 Ltr 116.00303 Wax Polish (Ready made) 1 Kg 232.00304 Putty for steel work 1 Kg 16.00305 Putty for wood work 1 Kg 33.00306 Supply & applying Melamine Polish Glossy/ Matt finish to

the wood works duly cleaning the surface and applying emery 1Sqm 324.00

18

Building Items

S.No


FOR 2007-08

paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., complete for finished item of work

307 Supply & applying Poly-Urethane Water Proof Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, applying two component wood sealer, after the surface preparation applying one coat of approved spraying PU thinner (for spraying) / applying one coat of approved brushing PU thinner or general purpose thinner (for brushing) and apply one coat of PU by brush or spray, air-dry overnight, Sand again with 180 No. emery paper and removing dust, applying second coat of PU, air drying for 4 - 6 Hrs, Sand with 320 No emery paper, and applying (either with spray or brush) two coats of approved brand PU including cost & labour charges, emery papers, cost of thinner & PU of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., complete for finished item

1Sqm 592.00

PAINTS (CONFORMING TO I.S.I) 308 Aluminium paint 1st Grade 1 Ltr 232.00309 Anti Corrosive bitumen paint (Black ) grade1 1 Ltr 354.00310 Red Oxide Primer Paint Grade -1 1 Ltr 84.00311 Red Oxide Primer Paint Grade – II 1 Ltr 64.00312 Synthetic Enamel paints in all shades Grade - I 1 Ltr 155.00

313 Synthetic Enamel paints in all shades Grade - II 1 Ltr 115.00

314 Plastic Emulsion Paint Grade – I 1 Ltr 180.00315 Water proof Cement paint of Superior Quality 1 Kg 31.70316 White Lead 1 Kg 67.00317 Marble Powder 1 Kg 17.00318 Cement primer Grade –I 1 Kg 80.00319 Cement primer Grade –II 1 Kg 62.00320 Impervious Water Proofing compound 1 Kg 22.00321 Fevicol/ Wood adhesive compound 1 Kg 142.00322 Wood Primer 1 Ltr 110.00323 Oil bound Distemper Primer. 1 Ltr 63.00324 Supplying and finishing (Altek or equivalent brand) to interior

faces of new walls and ceiling of approved colour as per manufacturers specification including cost and conveyance of materials to site and labour charges such as preparing the wall, applying primary coat etc, complete for finished item of work.

1 Sqm 70.00

325 Altek paint 25 Kg 313.20

19

Building Items

S.No


FOR 2007-08

326 Trump 1 Ltr 130.00327 Snowcem or equivalent quality 25 Kg 864.00328 Surya Cem or equivalent quality 25 Kg 162.00329 a)Unitek Fine Grade or equivalent brand 25kg 259.20330 b)Supply and finishing of Unitek fine Grade or equivalent brand

t with superfine grade to interior faces of new walls and ceiling of approved colour as per manufacturers specification including cost and conveyance of materials to site and labour charges such as preparing the wall, applying the primary coat etc., complete for finished item of work

1 sqm 99.40

331 Unitek Superfine Grade or equivalent brand 25kg 280.80332 Supply and finishing of Unitek Superfine Grade or equivalent

brand to interior faces of new walls and ceiling of approved colour as per manufacturers specification including cost and conveyance of materials to site and labour charges such as preparing the wall, applying the primary coat etc., complete for finished item of work

1sqm. 70.20

333 Unitek Granito Grade or equivalent brand 1kg 1296.00334 Unitek Granito Grade or equivalent brand 5kg 6318.00335 Unitek Granito Grade or equivalent brand 20kg 25110.00336 Supply and finishing of Unitek Granito Grade or equivalent

brand to interior faces of new walls and ceiling of approved colour as per manufacturers specification including cost and conveyance of materials to site and labour charges such as preparing the wall, applying the primary coat etc., complete for finished item of work

1sqm. 1274.40

337 a).Unitek Superfine (Water resistant) Grade or equivalent brand

25kg 810.00

338 b).Supply and finishing of Unitek Superfine(Water resistant)Grade or equivalent brand to interior and exterior faces of new walls and ceiling of approved colour as per manufacturers specifications including cost and conveyance of materials to site and labour charges such as preparing the wall, applying the primary coat etc., complete for finished item of work.

1 sqm. 135.00

339 Unitek Orient Grade or equivalent brand 25kg 1058.40340 Supply and finishing of Unitek Orient Grade or equivalent

brand to interior and exterior faces of new walls and ceiling of approved colour as per manufacturers specification including cost and conveyance of materials to site and labour charges such as preparing the wall, applying the primary coat etc., complete for finished item of work

1sqm. 194.40

341 Unitek Antico Grade or equivalent brand 25kg 1123.20342 Supply and finishing of Unitek Antico Grade or equivalent

brand to interior and exterior faces of new walls and ceiling of approved colour as per manufacturers specification including cost and conveyance of materials to site and labour charges such as preparing the wall, applying the primary coat etc., complete for finished item of work

1Sqm. 178.20

343 Supply & Application of Two Coats of Altek Super Fine, One Coat of Altek Water Based Cement Primer & Two Coats of Altek Flora (Plastic Emulsion Paint)

1 Sqm. 97.00

20

Building Items

S.No


FOR 2007-08

344 Supply & Application of Two Coats of Altek Super Fine, One Coat of Altek Water Based Cement Primer & Two Coats of Delight (Acrylic Washable Distemper)

1 Sqm. 81.00

345 Supply & Application One Coat of Altek Water Based Cement Primer & Two Coats of Altek Harmony (Acrylic Emulsion Paint Extr. Grade).

1 Sqm. 86.00

346 Supply & Application of One Coat of Altek Water Based Cement Primer & Two Coats of Altek Alltimate (100% Pure Acrylic Emulsion Paint)

1 Sqm. 118.00

ANTI TERMITE TREATMENT TO OLD & EXISTING BUILDINGS

347 Providing post construction anti termite treatment to drilling 1/2 inch dia., holes in 12mm depth at the edges of wall floor junction every foot apart and pouring anti termite chemical (Chloripyriphos 20% E.C / Lindane - 20 % E.C.) with a hand operator pressure pump until refusal or to a maximum of one litter per hole. Holes will sealed with cement motor after treatment and providing spraying and injection termiticides for treating and applying doors, windows, frames, removing, crusting treating with preventive chemicals (the plinth area of the building each floor shall be taken for purpose of payment) finished item including all costs, conveyances

1 Sqm. 118.00

348 Providing pre construction anti termite treatment for new buildings: Providing, applying and Injecting for pre construction anti termite treatment to wall trenches bottom of excavation, foundations, vertical walls, top surface of plinth filling wall and floor junctions, joints, conduits and external perimeter of the building (Chloripyriphos 20% E.C / Lindane - 20 % E.C. ) with a hand operator pressure pump at applicable areas as per site condition in various stages as per IS: 6313-2003 (Par-II), the plinth area of the building each floor shall be taken for purpose of payment and finished item including all costs, conveyances

1 Sqm. 133.00

349 Vinycide, Matt finish plastic emulsion Artilin Anti Insect paint OR EQUIVALENT for interior walls and ceilings, which will be applied on cement plastered surface, brick, old matt finish paints adhering to the substrate, wood etc., washable finished item .

1 Sqm. 226.00

350 Kremasoie INS, Semi gloss finish Artilin Anti Insect paint OR EQUIVALENT for interior and exterior surfaces, which will be applied on cement plastered surface, brick, old matt finish paints adhering to the substrate, wood, wood products, plasttic products, tiles, glass texttile covering etc., washable finished item .

1 Sqm. 262.00

351 Kremacryl, Matt finish Artilin Anti Insect paint OR EQUIVALENT for interior and exterior, which will be applied on cement plastered surface, brick, old matt finish paints adhering to the substrate, wood etc., washable finished item .

1 Sqm. 287.00

352 Vernis 107, Semi gloss finish transparent Artilin Anti Insect Varnish OR EQUIVALENT for wood work, works against wood borers and termites also for interiors only, which will be applied on wooden surfaces, steel surfaces and tiles, washable finished item .

1 Sqm. 262.00

353 Kermasoie Fongicide, Semi gloss finish Artilin Anti Fungus paint OR EQUIVALENT for interiors and exteriors which will be applied on cement plastered surface, brick, old Matt finish

1 Sqm. 237.00

21

Building Items

S.No


FOR 2007-08

paints adhering to the substrate, wood and wood products, plaster products, tiles and glass textile covering etc., washable finished item .

354 Kermasoie INS& Fong, Semi gloss finish acrylic Artilin Anti Insect and Anti Fungus paint OR EQUIVALENT for interiors and exteriors which will be applied on cement plastered surface, brick, old Matt finish paints adhering to the substrate, wood and wood products, plaster products, tiles and glass textile covering etc., washable finished item .

1 Sqm. 292.00

355 Bactesoie, Semi gloss finish Artilin bactericidal and fungicidal paint OR EQUIVALENT for interiors only which will be applied on cement plastered surface, brick, old Matt finish paints adhering to the substrate, wood and wood products, plaster products, tiles and glass textile covering etc., washable finished item .

1 Sqm. 320.00

Particle Board (Exterior Grade) (Bhutan or Equivalent) A. Plain Particle Board

356 8 mm thick 1 Sqm 229.00357 12 mm thick 1 Sqm 255.00358 18 mm thick 1 Sqm 334.00359 21.4 mm thick 1 Sqm 392.00360 25 mm thick 1 Sqm 444.00361 35 mm thick 1 Sqm 726.00

Melamine Faced prelaminated B. Particle Board (Single Deco)

362 8 mm thick 1 Sqm 475.00363 12 mm thick 1 Sqm 538.00364 18 mm thick 1 Sqm 624.00365 25 mm thick 1 Sqm 707.00366 35 mm thick 1 Sqm 1176.00

Melamine Faced prelaminated C. Particle Board (Twin Deco)


Particle Board (Interior Grade)(Bhutan or Equivalent) A. Plain Particle Board

372 6 mm thick 1 Sqm 183.00373 8 mm thick 1 Sqm 196.00374 10 mm thick 1 Sqm 216.00375 12 mm thick 1 Sqm 229.00376 18 mm thick 1 Sqm 282.00377 21.4 mm thick 1 Sqm 334.00378 25 mm thick 1 Sqm 353.00379 35 mm thick 1 Sqm 614.00

Melamine Faced Prelaminated B. Particle Board (Single Deco)

380 8 mm thick 1 Sqm 418.00381 10 mm thick 1 Sqm 443.00382 12 mm thick 1 Sqm 468.00

22

Building Items

S.No


FOR 2007-08

383 18 mm thick 1 Sqm 538.00384 25 mm thick 1 Sqm 608.00

Melamine Faced prelaminated C. Particle Board (Twin Deco)


NATURAL COLOUR INSULATING BOARD 389 12 mm thick 1 Sqm 177.00390 18 mm thick 1 Sqm 261.00391 25 mm thick 1 Sqm 333.00

WHITE FACE INSULATING BOARD 391 12 mm thick 1 Sqm 216.00392 18 mm thick 1 Sqm 308.00393 25 mm thick 1 Sqm 274.00394 Extra for veneered particle Board with commercial veneering

on both sides.1 Sqm 105.00

395 Veneering on both sides with one side teak veneered and other side commercial veneered

1 Sqm 222.00

396 Teak veneering on both sides 1Sqm 347.00397 Particle Board 12 mm thick (Three Layer) 1 Sqm 274.00

PANELS Plain particle Board (PPB) (Interior Grade)

398 9 mm thick 1 Sqm 226.00399 12 mm thick 1Sqm 251.00400 15 mm thick 1 Sqm 284.00401 18 mm thick 1Sqm 314.00402 21.4 mm thick 1 Sqm 356.00403 25 mm thick 1Sqm 378.00

Plain particle Board (PPB) (Exterior Grade)


Prelaminated particle Board (OSL) (Interior Grade) 410 9 mm thick 1 Sqm 461.00411 12 mm thick 1Sqm 497.00412 15 mm thick 1 Sqm 548.00413 18 mm thick 1Sqm 582.00414 21.4 mm thick 1 Sqm 625.00415 25 mm thick 1Sqm 653.00

Prelaminated particle Board (OSL) (Exterior Grade) 416 9 mm thick 1 Sqm 518.00417 12 mm thick 1Sqm 582.00418 15 mm thick 1 Sqm 622.00419 18 mm thick 1Sqm 661.00420 21.4 mm thick 1 Sqm 727.00

23

Building Items

S.No


FOR 2007-08

421 25 mm thick 1Sqm 769.00 Prelaminated particle Board (BSL) (Interior Grade )


Prelaminated particle Board (BSL) (Exterior Grade) 428 9 mm thick 1 Sqm 580.00429 12 mm thick 1Sqm 650.00430 15 mm thick 1 Sqm 708.00431 18 mm thick 1Sqm 781.00432 21.4 mm thick 1 Sqm 815.00433 25 mm thick 1Sqm 848.00

LAMINATED SHEETS (EQUIVALENT TO DECOLAM) Glossy Finish

434 1.00 mm thick 1 Sqm 282.00435 1.50 mm thick 1Sqm 405.00436 1.80 mm thick 1Sqm 444.00

Mat Finish 437 1.00 mm thick 1 Sqm 301.00438 1.50 mm thick 1 Sqm 418.00439 1.80 mm thick 1Sqm 451.00

MEDIUM FIBRE BOARD INTERIOR GRADE (EQUIVALENT TO NUWUD)

440 6 mm thick 1 Sqm 288.00441 8 mm thick 1Sqm 327.00442 12 mm thick 1 Sqm 438.00443 15 mm thick 1Sqm 556.00444 18 mm thick 1 Sqm 621.00445 25 mm thick 1Sqm 883.00446 30 mm thick 1 Sqm 1066.00447 35 mm thick 1Sqm 1163.00

MEDIUM FIBRE BOARD EXTRIOR GRADE (EQUIVALENT TO NUWUD)

448 6 MM Thick 1 Sqm. 393.00449 8 MM Thick 1 Sqm. 457.00450 12 MM Thick 1 Sqm. 605.00451 15 MM Thick 1 Sqm. 760.00452 18 MM Thick 1 Sqm. 851.00453 25 MM Thick 1 Sqm. 1135.00454 30 MM Thick 1 Sqm. 1413.00455 35 MM Thick 1 Sqm. 1669.00

MEDIUM DENSITY FIBRE ECO BOARD or Equivalent PLAIN PARTICLE BOARD (INTERIOR GRADE)


24

Building Items

S.No


FOR 2007-08

461 35 mm thick 1 Sqm 805.00 PLAIN PARTICLE BOARD (EXTERIOR GRADE) 462 9 mm thick 1 Sqm 346.00463 12 mm thick 1 Sqm 372.00464 18 mm thick 1 Sqm 489.00465 25 mm thick 1 Sqm 613.00466 30 mm thick 1 Sqm 805.00467 35 mm thick 1 Sqm 929.00

PRE-LAMINATED PARTICLE BOARD ONE SIDE LAMINATED INTERIOR GRADE

468 9 mm thick 1 Sqm 415.00469 12 mm thick 1 Sqm 469.00470 18 mm thick 1 Sqm 545.00471 25 mm thick 1 Sqm 613.00472 30 mm thick 1 Sqm 886.00473 35 mm thick 1 Sqm 945.00

PRE-LAMINATED PARTICLE BOARD ONE SIDE LAMINATED EXTERIOR GRADE


PRE-LAMINATED PARTICLE BOARD BOTH SIDE LAMINATED INTERIOR GRADE


PRE-LAMINATED PARTICLE BOARD BOTH SIDE LAMINATED EXTERIOR GRADE


492 DECOLAM SHEET GLOSSY FINISH-1mm thick 1 Sqm. 288.00

493 DECOLAM SHEET MATT FINISH – 1mm thick 1 Sqm. 311.00494 Teak Veneer Lamination - 4 mm thick - Pencil Grains 1 Sqm 253.00495 Teak Veneer Lamination - 4 mm thick - Natural Grains 1 Sqm 506.00

PARTICLE BOARD CEILINGS 496 Gypsum Board 0.595 M x 0.595 M of 12.5 mm thick as per IS

2095 -19921 Sqm 209.00

497 False ceiling with 12.5 mm Gypsum Board IS 2095 -1982 using Gyp steel section including installation and complete finish

1 Sqm 636.00

25

Building Items

S.No


FOR 2007-08

excluding painting.498 Supply & fixing GVP board 0.595 x 0.595M 12.5mm thick tile

using fine line grid system including installation and complete finished excluding painting

1 Sqm 704.00

Gypboard wall lining : 499 Supply & fixing of Gypboard wall lining using 9.5/12.5 mm thick

Gyp - board (conforming to IS 2095-1982), fixing to Gypsteel GI channels of perimeter channel (20mm x30mm x27mm x0.55mm thick) and ceiling channels of (51.5 mm x 26mm x26mmx10.5mmx0.55mm thick) and fixing and finishing using joint compound and paper tape complete finish as per specification without painting.

1 Sqm 651.00

Gypboard plain false ceiling: 500 Supply and fixing of Gypboard plain false ceiling using 12.5

mm thick Gypboard conforming to IS 2095 -1982, fixing to Gypsteel GI channels frame work using perimeter channel (20mm x 30 mm x 27mm x 0.55mm) Intermediate channels (45mm x 15mm x 15 mm x 0.9mm) and ceiling channels (51.5 mm x26mm x10.5mm x 0.55 mm thick) jointing and finishing using joint compound and paper tape complete finish as per specification without painting

1 Sqm 716.00

Gypboard (fine line) Grid suspended ceiling Supply and fixing of Gypboard (conforming to IS 2095-1982 ) FALSE CEILING WITH FINE LINE EXPOSED Grid suspended ceiling system using pre-coated galvanized steel main "T" section (24x38x0.35 mm thick x 3600 mm) Cross "T" (24x38x0.35mm x 600mm)and wall angle of (24x24x0.8 mm thick x 3050 mm) to form Grid size 600x 600 mm using MS Rods, "J" Bolts and anchor fasteners etc as per specification & as directed by dept, officers.

501 Using Plain Gypsum Board 9.5 mm laid on to the Grid 1 sqm 588.00502 Using Plain Gypsum board 12.5 mm laid on to the Grid. 1 Sqm 636.00

Gypboard metal stud partition single layer:- 503 Supply &fixing 75mm thick metal stud partition using 12.5 mm

thick Gypboard conforming to IS 2095-1982 screw fixed to either side to 48 mm studs of 0.55 mm thick with the 50 mm floor and ceiling channel 0.55 mm and the joints duly finished with joint compound, paper tape and two coats Dry wall top coat as per specification.

1 Sqm 1069.00

504 Providing and fixing in true horizontal level 600 mm x 600 mm 15 mm thick Arm strong false ceiling system manufactured by M/s Arm strong world Industries using hot dipped Galvanised Steel section exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm at very 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI Wire laying fine fissured butt edge ceiling tiles of 15 mm thick mineral fibre Board manufactured by M/s Arm Strong World Industries Ltd., having RH 99% and for finished of size 600 x 600 mm including Cost &conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making complete for finished item of work

1 Sqm 772.00

26

Building Items

S.No


FOR 2007-08

505 Providing wooden panelling 12 mm thick Novapan one side laminated sheet fixed on wooden frame of BT wood size 50.8 mm x 25.4 mm (2"x1") at distance of 609.6mm (2'-0") intervals of both ways providing 3/4" x 1/2" (19.05 mm x 12.7 mm) size BT wood ornamental cover beading and necessary screws, fevicol glue complete for finished item of work.

1 Sqm 1443.00

506 Supply , manufacturing , installing of library Rack of 19 mm thick ISI marked commercial ply All round boxing verticals, Horizontal for depth of 609.6mm (2'-0) and shelves with 3.5 mm thick teak veneer covered with on exposed surface externally and internally and each panels with 6mm thick ISI commercial ply with 3.5 mm thick teak veneer for glazed shutters teak wood size 55 mm x 28mm with 5 mm thick glass fixed with ornamental beading and other ornamental beading is covered as per drawing including brass hinges, ornamental handles, ball catchers, buffers, locking system etc, and all the commercial ply exposed edges are to be covered with 6 mm thick teak wood lipping. All the teak veneer and teak wood and ornamental beading is to coated with polishing and a coat of melamine finish etc, complete for finished item of work.

1 Sqm 6178.00

507 Supply of Thermocole 12 mm thick sheets 1 Sqm 21.00508 Supply of Thermocole 19 mm thick sheets 1 Sqm 36.00

Supply and fixing of Thermocole Falseceiling in 2'-0"x2'-0" Grid (609.6x609.6 mm) fixing to anodised Aluminium 'L' angles of size 24x24x1mm for perimeter, Cross "T" of size 24x38x1 mm including fixing complete as per specification for finished item of work

509 25 mm thick 1 Sqm 363.00510 19 mm thick 1 Sqm 339.00

MULTIPURPOSE RAMCO HILUX BOARDS (CALCIUM SILICATE BOARD) or EQUIVALENT

511 6mm thick 1sqm 202.00512 8mm thick 1sqm 270.00513 10mm thick 1sqm 337.00514 12mm thick 1sqm 404.00

RAMCO HILUX BOARD EXPOSED GRID FALSE CEILING OR EQUIVALENT

515 a) Supply and fixing of Ramco Hilux false ceiling with 6mm thick 595mm x 595mm Ramco Hilux board laid on to the grid using main "T" 24x38x3600mm, Cross "T" of size 24x38x1200mm and steel angle of size 24x24mm.

1sqm 547.00

516 b) Using Ramco Hilux Board 0.595M x 0.595M 8mm thick 1sqm 614.00517 c) Using Ramco Hilux Board 0.595M x 0.595M 10mm thick 1sqm 681.00518 d) Using Ramco Hilux Board 0.595M x 0.595M 12mm thick 1sqm 749.00

RAMCO HILUX BOARD PLAIN FALSE CEILING OR EQUIVALENT a) Supply and fixing of Ramco Hilux false ceiling fixing to

Hilux G.I channels framework using perimeter channel (20mmx 30mmx27mmx0.55mm) Intermediate channel (45mmx15mmx15mmx0.9mm) and ceiling channels (51.5mmx26mmx10.5mmx0.55mm thick jointing and finishing using joint compound and glass fibre tape complete finished item of work as per specification without painting

519 a) 8mm thick Ramco Hilux board 1sqm 731.00

27

Building Items

S.No


FOR 2007-08

520 b) Using 10mm thick Ramco Hilux board 1sqm 798.00521 c) Using 12mm thick Ramco Hilux board 1sqm 865.00

RAMCO HILUX METAL STUD PARTITION SINGLE LAYER OR EQUIVALENT Supply and Fixing 66mm thick metal stud partition screw fixed

to either side of 48mm studs of 0.55mm thick with 50mm floor and ceiling channel 0.55mm and the joints duly finished with joining compound, glass fibre tape and two coats dry wall top coat as per specification finished Item of work

522 a) using 8mm thick Ramco Hilux boards 1sqm 1131.00523 b) Using 10mm thick Ramco Hilux boards 1sqm 1266.00524 c) Using 12mm thick Ramco Hilux boards 1sqm 1400.00

RAMCO HILUX WALL LINING or EQUIVALENT Supply and fixing of Ramco Hilux wall lining fixing to GI

channels of perimeter channel 30mm x 27mm x 0.55 thick and ceiling channels of 51.1mm x 26mm x 10.5mm x 0.55mm thick and fixing and finishing using joint compound and glass fibre tape complete finish as per specification without painting for finished item of work

525 a) using 8mmthick Ramco Hilux board 1sqm 671.00526 b) Using 10mm thick Ramco Hilux boards 1sqm 739.00527 c) Using 12mm thick Ramco Hilux boards 1sqm 806.00

RAMCO HILUX FIRE RATED PARTITION-Two Layers OR EQUIVALENT

528 Supply and Fixing 66mm thick metal stud partition using 2 layers of 12mm thick Ramco Hilux boards screw fixed to either side to 48mm studs of 0.55mm thick with 50mm floor and ceiling channel 0.55mm.The boards joints are to be staggered to avoid through passage. Ceramic wool of 50mm thick, 64kg/m3 density is to be placed in cavity of the partition. The joints duly finished with joining compound, glass fibre tape and two coats dry wall top coat as per specification with out painting for finished item of work

1sqm 3759.00

529 Supply of Plaster of paris Boards 12 mm thick 1 Sqm 392.00530 Supply of Plaster of Paris Boards 10 mm thick 1 Sqm 327.00531 Labour charges for fixing plaster of paris false ceiling with for

GI channels of perimeter channel 30mm x 27mm x 0.55 thick and ceiling channels of 51.1mm x 26mm x 10.5mm x 0.55mm thick and fixing and finishing using joint compound and luppum/ putty finish as per specification without painting including cost of all materials but excluding cost of Plaster of paris sheets/ boards for finished item of work

1 Sqm 426.00

PLYWOOD ITEMS PLYWOOD - IS 303 (Both Sides Commercial)

MR Grade as per IS 848 (UF Bonded) 532 3 Ply - 4 mm thick Plywood 1 Sqm 278.00533 5 Ply - 6 mm thick Plywood 1 Sqm 306.00534 5 Ply - 8 mm thick Plywood 1 Sqm 360.00535 5 Ply - 9 mm thick Plywood 1 Sqm 360.00536 9 Ply - 12 mm thick Plywood 1 Sqm 453.00537 9 Ply - 15 mm thick Plywood 1 Sqm 667.00538 9 Ply - 18 mm thick Plywood 1 Sqm 653.00

BWR/ BWP Grades - IS 848 (PF Bonded)

28

Building Items

S.No


FOR 2007-08

539 3 Ply - 4 mm thick Plywood 1 Sqm 318.00540 5 Ply - 6 mm thick Plywood 1 Sqm 373.00541 5 Ply - 8 mm thick Plywood 1 Sqm 465.00542 5 Ply - 9 mm thick Plywood 1 Sqm 439.00543 9 Ply - 12 mm thick Plywood 1 Sqm 573.00544 9 Ply - 15 mm thick Plywood 1 Sqm 823.00545 9 Ply - 19 mm thick Plywood 1 Sqm 826.00

VENEERED DECORATIVE PLYWOOD -IS 1328

One Side Teak Veneer lamination of 1.0 mm thick 546 3 Ply - 4 mm thick Plywood 1 Sqm 412.00547 5 Ply - 6 mm thick Plywood 1 Sqm 536.00548 5 Ply - 9 mm thick Plywood 1 Sqm 687.00549 9 Ply - 13 mm thick Plywood 1 Sqm 876.00

VENEERED DECORATIVE PLYWOOD-IS 1328 Both Side Teak Veneer lamination of 1.0 mm thick

550 5 Ply - 9 mm thick Plywood 1 Sqm 896.00551 9 Ply - 12 mm thick Plywood 1 Sqm 1045.00

Flush Door Shutters (Kutty or Equivalent) Conforming to IS 2201

(Providing Solid core Flush Doors veneer facing). Both Sides Teak

552 40/38 mm thick 1 Sqm 1433.00553 35mm thick 1 sqm 1399.00554 30 mm thick 1 sqm 1335.00

One Side teak wood and other side commercial 555 40/38 mm thick 1 sqm 1290.00556 35 mm thick 1 sqm 1236.00557 30 mm thick 1 sqm 1183.00

One Side teak wood and other side Kutty Coat 558 40/38 mm thick 1 sqm 1525.00559 35 mm thick 1 sqm 1466.00560 30 mm thick 1 sqm 1407.00

Both Side Commercial 561 40/38 mm thick 1 sqm 1095.00562 35 mm thick 1 sqm 1043.00563 30 mm thick 1 sqm 989.00

Both Sides Kutty Coat 564 40/38 mm thick 1 sqm 1360.00565 35 mm thick 1 sqm 1302.00566 30 mm thick 1 sqm 1243.00

Providing Internal Lipping by Teak Wood Single Leaf 567 All edges 30 mm thick & below 1 sqm 349.00568 35 mm thick 1 sqm 396.00569 38/40 mm thick 1 sqm 435.00

Providing Internal Lipping by Teak Wood Double Leaf 570 All edges 30 mm thick & below 1 sqm 534.00571 35 mm thick 1 sqm 560.00572 38/40 mm thick 1 sqm 738.00

Providing External Lipping by Teak Wood Single Leaf 573 All edges 30 mm thick & below 1 sqm 244.00574 35 mm thick 1 sqm 270.00

29

Building Items

S.No


FOR 2007-08

575 38/40 mm thick 1 sqm 270.00576 Bottom edges only 1 sqm 26.00

Providing External Lipping by Teak Wood Double Leaf 577 All edges 30 mm thick & below 1 sqm 290.00578 35 mm thick 1 sqm 323.00579 38/40 mm thick 1 sqm 323.00580 Bottom edges only 1 sqm 26.00

Providing External Lipping by Hard Wood Single Leaf 581 All edges 30 mm thick & below 1 sqm 92.00582 35 mm thick 1 sqm 105.00583 38/40 mm thick 1 sqm 105.00584 Bottom edges only 1 sqm 21.00

Providing External Lipping by Hard Wood Double Leaf 585 All edges 30 mm thick & below 1 sqm 119.00586 35 mm thick 1 sqm 132.00587 38/40 mm thick 1 sqm 132.00588 Bottom edges only 1 sqm 21.00

Designers Doors by Teak wood 589 Torina 1 sqm 442.00590 Penta Torina 1 sqm 514.00591 Arch Torina 1 sqm 442.00

Designers Doors by Hard Wood 592 Torina 1 sqm 198.00593 Penta Torina 1 sqm 264.00594 Arch Torina 1 sqm 198.00595 Tanjore Art 1 sqm 745.00

Kutty’s New International Eleganza range Panel Doors OR EQUIVALENT with imported phenolic moulded fibre board panels

Kutty’s Vishala Heavy Duty 596 975 x 2035 x 30 mm thick 1 sqm 1953.00597 920 x 2065 x 30 mm thick 1 sqm 1953.00598 830 x 2065 x 30 mm thick 1 sqm 1953.00599 680 x 2065 x 30 mm thick 1 sqm 1953.00600 975 x 2035 x 35 mm thick 1 sqm 2015.00601 920 x 2065 x 35 mm thick 1 sqm 2015.00602 830 x 2065 x 35 mm thick 1 sqm 2015.00603 680 x 2065 x 35 mm thick 1 sqm 2015.00604 975 x 2035 x 38 mm thick 1 sqm 2071.00605 920 x 2065 x 38 mm thick 1 sqm 2071.00606 830 x 2065 x 38 mm thick 1 sqm 2071.00607 680 x 2065 x 38 mm thick 1 sqm 2071.00

Kutty’s Vishala Light Duty 608 975 x 2035 x 30 mm thick 1 sqm 1875.00609 920 x 2065 x 30 mm thick 1 sqm 1875.00610 830 x 2065 x 30 mm thick 1 sqm 1875.00611 680 x 2065 x 30 mm thick 1 sqm 1875.00612 975 x 2035 x 35 mm thick 1 sqm 1920.00613 920 x 2065 x 35 mm thick 1 sqm 1920.00614 830 x 2065 x 35 mm thick 1 sqm 1920.00615 680 x 2065 x 35 mm thick 1 sqm 1920.00

30

Building Items

S.No


FOR 2007-08

616 975 x 2035 x 38 mm thick 1 sqm 1965.00617 920 x 2065 x 38 mm thick 1 sqm 1965.00618 830 x 2065 x 38 mm thick 1 sqm 1965.00619 680 x 2065 x 38 mm thick 1 sqm 1965.00

Kutty’s Heera Heavy Duty 620 920 x 2035 x 30 mm thick 1 sqm 1953.00621 815 x 2035 x 30 mm thick 1 sqm 1953.00622 660 x 2035 x 30 mm thick 1 sqm 1953.00623 920 x 2035 x 35 mm thick 1 sqm 2015.00624 815 x 2035 x 35 mm thick 1 sqm 2015.00625 660 x 2035 x 35 mm thick 1 sqm 2015.00626 920 x 2035 x 38 mm thick 1 sqm 2071.00627 815 x 2035 x 38 mm thick 1 sqm 2071.00628 660 x 2035 x 38 mm thick 1 sqm 2071.00

Kutty’s Heera Light Duty 629 920 x 2035 x 30 mm thick 1 sqm 1875.00630 815 x 2035 x 30 mm thick 1 sqm 1875.00631 660 x 2035 x 30 mm thick 1 sqm 1875.00632 920 x 2035 x 35 mm thick 1 sqm 1920.00633 815 x 2035 x 35 mm thick 1 sqm 1920.00634 660 x 2035 x 35 mm thick 1 sqm 1920.00635 920 x 2035 x 38 mm thick 1 sqm 1965.00636 815 x 2035 x 38 mm thick 1 sqm 1965.00637 660 x 2035 x 38 mm thick 1 sqm 1965.00

Kutty’s Fantasy Heavy Duty 638 815 x 2065 x 30 mm thick 1 sqm 1977.00639 660 x 2065 x 30 mm thick 1 sqm 1977.00640 815 x 2065 x 35 mm thick 1 sqm 2015.00641 660 x 2065 x 35 mm thick 1 sqm 2015.00642 815 x 2065 x 38 mm thick 1 sqm 2071.00643 660 x 2065 x 38 mm thick 1 sqm 2071.00

Kutty Fantasy Light duty 644 815 x 2065 x 30 mm thick 1 sqm 1875.00645 660 x 2065 x 30 mm thick 1 sqm 1875.00646 815 x 2065 x 35 mm thick 1 sqm 1920.00647 660 x 2065 x 35 mm thick 1 sqm 1920.00648 815 x 2065 x 38 mm thick 1 sqm 1965.00649 660 x 2065 x 38 mm thick 1 sqm 1965.00

Kutty’s Eleganza Heavy Duty 650 815 x 2065 x 30 mm thick 1 sqm 1977.00651 660 x 2065 x 30 mm thick 1 sqm 1977.00652 815 x 2065 x 35 mm thick 1 sqm 2015.00653 660 x 2065 x 35 mm thick 1 sqm 2015.00654 815 x 2065 x 38 mm thick 1 sqm 2071.00655 660 x 2065 x 38 mm thick 1 sqm 2071.00

Kutty’s Eleganza Light Duty 656 815 x 2065 x 30 mm thick 1 sqm 1875.00657 660 x 2065 x 30 mm thick 1 sqm 1875.00658 815 x 2065 x 35 mm thick 1 sqm 1920.00659 660 x 2065 x 35 mm thick 1 sqm 1920.00660 815 x 2065 x 38 mm thick 1 sqm 1965.00

31

Building Items

S.No


FOR 2007-08

661 660 x 2065 x 38 mm thick 1 sqm 1965.00 Kutty’s Heleganza Golden Oak Heavy Duty

662 850 x 2035 x 30 mm thick 1 sqm 1977.00663 850 x 2035 x 35 mm thick 1 sqm 2015.00664 850 x 2035 x 38 mm thick 1 sqm 2071.00

Kutty’s Heleganza Golden Oak Light Duty 665 850 x 2035 x 30 mm thick 1 sqm 1875.00666 850 x 2035 x 35 mm thick 1 sqm 1920.00667 850 x 2035 x 38 mm thick 1 sqm 1965.00

Providing external Lipping with teak wood. 668 30/32 mm thick 1 sqm 244.00669 35/38 mm thick 1 sqm 270.00

Providing external Lipping with Hard wood. 670 30/32 mm thick 1 sqm 105.00671 35/38 mm thick 1 sqm 132.00672 Polyurethane coating for extra water resistance for bath / toilet

doors for each side.1 sqm 99.00

ELEGANT PANEL DOOR OR Equivalent with imported phenolic moulded fibre board panels.

CLASSIQUE 673 1016 x2085 x 30mm thick 1sqm 1689.00674 830 x2085 x 30mm thick 1sqm 1689.00675 750 x2085 x 30mm thick 1sqm 1689.00676 680 x2085 x 30mm thick 1sqm 1689.00

COLONIST 677 920 x2085 x 30mm thick 1sqm 1689.00678 810 x2085 x 30mm thick 1sqm 1689.00679 750 x2085 x30mm thick 1sqm 1689.00680 680 x2085 x30mm thick 1sqm 1689.00

CARMELLE 681 920 x2040 x30mm thick 1sqm 1678.00682 830 x2040 x30mm thick 1sqm 1678.00683 750 x2040 x30mm thick 1sqm 1678.00684 680 x2040 x30mm thick 1sqm 1678.00

BOTH SIDE COMMERICAL DOOR 685 30mm thick 1sqm 701.00686 32mm thick 1sqm 737.00687 35mm thick 1sqm 795.00688 40mm thick 1sqm 895.00689 One side teak veneer shutter 1sqm 277.00690 Both side teak veneer shutter 1sqm 554.00691 Both side film 1sqm 246.00

INTERNAL TEAK WOOD LIPPING 692 30mm thick (single leaf) 1sqm 415.00693 35mm thick (single leaf) 1sqm 474.00694 40mm thick (single leaf) 1sqm 533.00695 30mm thick (double leaf) 1sqm 592.00696 35mm thick (double leaf) 1sqm 651.00697 40mm thick (double leaf) 1sqm 711.00

EXTERNAL TEAK WOOD LIPPING 698 30mm thick (single leaf ) 1sqm 272.00

32

Building Items

S.No


FOR 2007-08

699 35mm thick (single leaf) 1sqm 296.00700 40mm thick (single leaf) 1sqm 320.00701 30mm thick (double leaf) 1sqm 332.00702 35mm thick (double leaf) 1sqm 355.00703 40mm thick (double leaf) 1sqm 380.00

DOOR FRAMES 704 ACCUCEL OR EQUIVALENT BATHROOM DOOR

CHAUKHAT FRAME: Single Rebate size 60mmx 30mm

The Door Chaukhat Frame (Single Rebate) shall be made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width and 30mm thickness and shall be fixed to wall as per instructions of engineer in charge using 100 x 8 sheet metal CSK screws. Door frame should be waterproof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for a long life for finished item of work

1 Rm 294.00

705 ACCUCEL OR EQUIVALENT PANEL DOOR SHUTTER: 750mm(W) x2100mm(L) x28mm (T)

The door shutter shall be made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width and 28mm thick as vertical and horizontal stiles, joints are made using solvent adhesive and GI ‘C’ sections (39mm x 19mm x 19mm x 0.6mm thick) or MS pipe (40mm x 20mm) stiffener frame insert and telescopic polymeric ‘L’ corners. The panel shall be filled with 3mm thick high-pressure compact laminate as per manufacturer’s guidelines. Cover moulding shall be provided for covering fixing screws and elegant look. Panel Door shutter should be waterproof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for a long life. Normal hardware and fitting shall be fixed for finished item of work

1 sqm 2973.00

706 ACCUCEL OR EQUIVALENT OPENABLE WINDOW SHUTTER WITH DOUBLE REBATE CHAUKHAT FRAME (1600mm x 1600mm)

The Window Chaukhat Frame (Double Rebate) shall be made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 100mm width and 30mm thickness. Made of two sections joined together with solvent adhesive and GI ‘C’ section (25mm x 19mm x 0.6mm thick) stiffener insert. Press fit type ‘Tee’ section 25mm width and 19mm thick is fixed in the frame after fixing it to wall as per instructions of engineer in charge using 100x8 sheet metal CSK screws.

1 Sqm.

The Open able Window shutter should made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width x 28mm thick as vertical and horizontal stiles. Joints are made using solvent adhesive and GI ‘C’ sections (39mm x 19mm x 19mm x 0.6mm thick) stiffener frame insert and telescopic polymeric ‘L’ corners. The 4mm thick glass panel shall be fixed using PVC foam profile beading (12mm x 10mm) for finished item of work

707 RAJSHRI OR EQUIVALENT SOLID DOOR FRAME Providing and fixing factory made polyvinyl chloride (PVC)

Door Frame of the size 50 x 47mm with a wall thickness of 1 Rm 303.00

33

Building Items

S.No


FOR 2007-08

5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work

708 RAJSHRI OR EQUIVALENT SOLID PANEL DOOR SHUTTER

Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing for finished item of work .

1 Sqm. 2205.00

DOOR FRAMES 709 MS. Hallow door frames manufactured by cold roll formed

process steel sheet 1.25mm thick bright CRCA confirming to IS 4351 - 1976 with Hinges tower Bolts etc.

1 Rm 203.00

Flush door shutters, solid bond wood block board type with teak ply on both faces.

710 25 mm thick 1 sqm 993.00711 30 mm thick 1 sqm 1026.00712 35 mm thick 1 sqm 1105.00

Flush door shutters, solid bond wood block board type with commercial ply on both faces.

713 25 mm thick 1 sqm 505.00714 30 mm thick 1 sqm 569.00715 35 mm thick 1 sqm 624.00716 40 mm thick 1 sqm 743.00

Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping)

717 20 mm thick 1 sqm 666.00718 25 mm thick 1 sqm 743.00719 30 mm thick 1 sqm 832.00720 35 mm thick 1 sqm 891.00721 40 mm thick 1 sqm 950.00

Plain cement bonded particle boards conforming to IS

34

Building Items

S.No


FOR 2007-08

14276 truly exterior grade (Bison panel or equivalent)722 6 mm thick 1 sqm 177.00723 8 mm thick 1 sqm 218.00724 10 mm thick 1 sqm 256.00725 12 mm thick 1 sqm 297.00726 16 mm thick 1 sqm 396.00727 20 mm thick 1 sqm 475.00728 25 mm thick 1 sqm 574.00729 30 mm thick 1 sqm 670.00730 40 mm thick 1 sqm 869.00

Prelaminated cement particle board truly exterior board both side laminated (Bison Lam or equivalent)

731 6 mm thick 1 sqm 525.00732 8 mm thick 1 sqm 552.00733 10 mm thick 1 sqm 579.00734 12 mm thick 1 sqm 606.00735 16 mm thick 1 sqm 668.00

BISON DESIGNER BOARD Availed Designs 1.Lumber 2.Quadra 3.Murk standard size 10'-0"x4'-0"

736 6mm 1 sqm 208.00737 8mm 1 sqm 242.00738 10mm 1 sqm 271.00739 12mm 1 sqm 305.00740 16mm 1 sqm 397.00

DECOCEIL DESIGNER CEILING BOARD patterns: 1.Tika 2.Forraplus 3.Chemerahplus (sizes 4x4,4x2,2x2)

741 3.2 mm 1 Sqm 172.00 E-BOARD MULTI PURPOSE CEMENT BOARDS (HIGH

PRESSURED STEAM CURED)

742 4 mm thick 1 Sqm. 112.00743 6 mm thick 1 Sqm. 170.00744 8 mm thick 1 Sqm. 220.90745 10 mm thick 1 Sqm. 247.00746 12 mm thick 1 Sqm. 319.80747 14 mm thick 1 Sqm. 320.10748 16 mm thick 1 Sqm. 374.00749 18 mm thick 1 Sqm. 400.10750 20 mm thick 1 Sqm. 454.90

E-BOARD CLASSIC 751 4 mm thick 1 Sqm. 186.90752 6 mm thick 1 Sqm. 280.00

E-BOARD PEARL 753 4 mm of size 595mm X 595mm 1 Sqm. 216.00

MULTIPURPOSE CEMENT BOARDS FALSE CEILING WITH EXPOSED METAL E-GRID IS 14862 : 2000

Supply and fixing of E-Board (High Pressured Steam Cured) multipurpose fibre cement board manufactured as per IS 14862 : 2000, to be fixed in E-Grid, GI suspended ceiling grid system of size 600 mm x 600 mm with, main runner 39 x 24.7 mm, cross T 29 x 24.7 mm and wall angle 22.2 x 22.2 mm the

35

Building Items

S.No


FOR 2007-08

grid is suspended from the truss with GI wire and necessary hardware

754 Using 6 mm thick E-board 1 Sqm 630.00755 Using 8 mm thick E-board 1 Sqm 693.00756 Using 4 mm thick E-board classic* 1 Sqm 651.00757 Using 6 mm thick E-board Classic* 1 Sqm 760.20758 Using 4 mm thick E-board Pearl 1 Sqm 672.00

ACOSTYLE FALSE CEILING with Exposed Metal E-Grid 759 Providing & Fixing false ceilings using E GRID pre painted GI

sections of dimensions of 38x24mm as main ‘T” and 28 x 24mm as the cross runners of 4’ and 2’along with wall angles of dimensions 24x22mm. These sections are to be suspended using 4mm dia GI rods or GI Straps from tie level (suspended using fasteners from slab/purlin etc) to form a uniform grid of 600x600mm after ensuring line and level 15mm of dimensions 595x595mm Acoustic tiles of make ‘ACOSTYLE’ of M/S Everest Industries Limited (mineral fibre acoustic tiles) to be installed in the above said grid with tile edges to be regular finished

1 Sqm 646.00

WALL PANELLING Supply and fixing of E-board wall panelling (water, fire and

Termite proof) with frame work made of GI stud profile of size 48 x 40 10 x 0.6 mm thick placed at every 610 mm C/C intervals fixed vertically in between floor and roof `U’ track of size 50 x 30 x 0.6 mm thick duly fixed with self expansion screws and with 8 mm thick E-board / 6 mm thick E-board classic cladded around with self tapping self embedding screws fixed at every 300 mm (centres) leaving a 3 mm gap between two panels of width 2’-0”. The Gap will be covered with a decorative beading. Surface will be given a smooth finish over a coat of primer.

760 With 8 mm E-board 1 Sqm. 836.90761 With 6 mm E-board Classic 1 Sqm. 903.00

DOUBLE SKIN PARTITION 762 Supply and fixing double skin E-board partition with Frame

work made of GI stud profile of size 48 x 40 x 10 x 0.6 mm thick placed at every 610 mm C/C intervals and 915 mm horizontal intervals duly fixed with self expansion screws, the E-board of 8 mm thick cladded around with self tapping self embedding screws fixed at every 300 mm (centres) leaving 3 mm gap between two panels of width 2’-0” (610 mm). The gap will be covered with decorative moulding surface will be given a smooth finish over cement primer. The rate is inclusive of cost and conveyance of all materials and labour charges etc. complete.

1 Sqm. 1287.30

DOOR 763 Supply and fixing of E-board door shutter with alround style “U”

lipping size 15 x 18 x 15 mm made from 0.8 mm thick powder coated cold rolled steel profiles with 16 mm thick E-board with necessary screws fixed at 1’-0” interval 250 mm long aldrops 2 Nos. M.S. nickel coated 250 mm long 1 No. M.S. Tower bolts including cost and conveyance of all materials at site and applying 1 coat of primer, 2 coats of luppum and 2 coats of synthetic enamel paint as per approved design for finished item of work.

1 Sqm. 1102.50

36

Building Items

S.No


FOR 2007-08

DOOR WITH CRCA FRAME 764 Providing and fixing frame made from 1.2 mm powder coated

cold rolled steel profiles of overall section size of 60 mm x 45 mm with 21 mm rivet for shutter with necessary stiffeners hinges and screws. E-board shutter with alround `U’ lipping of size 15 X 18 X 15 mm made from 0.8 mm thick CRCA powder coated steel profile with 16 mm thick E-board with necessary screws fixed at every 1’-0” interval 250 mm long aldrops 2 Nos. MS Nickel coated 250 mm long 1 No. MS tower bolt including cost and conveyance. One coat of primer, 2 coats of luppum and 2 coats of synthetic enamel paint as per approved colour, labour charges etc.

1 Sqm. 1680.00

Cup Boards Shutters using Cement Bonded Particle Board (Bison Panel or Equivalent )

765 Supply and fixing of cup board shutters and frames using 16mm thick Cement Bonded Particle Board (Bison Panel or Equivalent) duly painted both sides with one coat of primer and two coats of synthetic / enamel paint of approved shade and brand including fixing of hardware like M.S. powder coated Piano hinges of size 18mm x 18mm, brass ball catches, Aluminium tower bolts and handles , Gore locks, Fevicol, screws and nails including cost and conveyance of all materials, labour charges, all incidental and operational charges etc., complete for finished item of work at site as per the directions of Engineer in Charge.

1 sqm 1493.00

False Ceiling using Cement Bonded Particle Board (Bison Panel or Equivalent )

766 Supply and fixing of false ceiling with galvanized and pre painted steel T section of size 24mm x 38mm x 0.4mm for main T duty pre punched to accept cross T section of size 24mm x 30mm x 0.4mm duly punched at both ends for insertion into main T. The grid size will be 610mm x 610mm. The frame work (grid) is suspended to the roof by using G.I flat of 0.60mm or 14-gauge G.I wire with necessary fixers to the roof and frame work. 8mm thick Cement Bonded Particle Board lay on the grid. The cost inclusive of necessary hardware, labour, one coat of primer (Both side) and two coats of smooth finish on visible side.

1Sqm 738.00

WALL PANELING WITH CEMENT BONDED PARTICLE BOARD (BISON PANEL OR EQUIVALENT)

767 Supply and fixing bison panel wall panelling (water proof) with frame work made of GI stud section of size 48mm x 35mm x 0.55mm thick placed at every 610 mm C/C intervals vertically and at 1200mm internals horizontally fixed to the wall by means of self expansion screws and caps. 10 mm thick cement bonded particle board (Bison panel or Equivalent) is to be fixed to frame by means of self taping screws placed at every 300 mm intervals leaving 3mm gap between two panels. The cost inclusive of one coat of Altek primer and two coats of Altek smooth finish and cost & conveyance of all materials, labour charges etc. complete as per the direction of Engineer in charge.

1 Sqm 1182.00

DOUBLE SKIN PARTITION WITH CEMENT BONDED PARTICLE BOARD (BISON PANEL OR EQUIVALENT)

37

Building Items

S.No


FOR 2007-08

768 Supply and fixing double skin partition made out of G.I. track section of size 50mmx 35mm x 0.55 mm for fixing to the roof and floor and stud section of size 48mm x 35mmx 0.55mm placed in track section vertically at 610mm intervals and at 1200mm intervals horizontally fixed to the wall by means of self expansion screws and caps to the wall and roof. 10mm thick Cement bonded particle board (BISON PANEL OR EQUIVALENT) is to be fixed both sides of frame work by using self taping screws fixed at every 300mm intervals to the frame work leaving 3 mm gap between two panels. The cost inclusive with one coat of Altek primer and two coats of Altek smooth finish and cost and conveyance of all materials to site, labour charges etc., complete as per the direction of Engineer in charge.

1 Sqm 1894.00

SINGLE SHUTTER WITH CEMENT BONDED PARTICLE BOARD (BISON PANEL OR EQUIVALENT)

769 Supply and fixing cement bonded particle board shutter with alround "U" section of size 12mmx18mm x12mm made from 0.6 mm thick galvanized, color quoted cold rolled steel profiles 16 mm thick panel with necessary screws fixed at every 304.8 mm intervals. The cost inclusive of MS Nickel coated Aldrops of size 255 mm long 2 Nos., 200 mm long tower bolts 1 No., 125 mm handles 2 Nos. 300 mm long "T" hinge cost and conveyance of all materials at site and applying 1 coat primer, 1 coat of luppum and 2 coats of synthetic enamel paint as per approved design for finished item of work.

1 Sqm 1398.00

Doors Frames (Colour Coated Steel Sections) & Shutter using Cement Bonded Particle Board (Bison Panel or Equivalent)

770 Providing and fixing of door frame made from cold roll formed sections made of galvanized (Base steel as per IS277 with zinc of 120 Gms/sqm) colour coated steel sections with total coated thickness of 1mm, primer coated with epoxy primer coat of 5-7 microns thick, finish paint with polyester paint of 12-16 microns. The Section for door frame is to be filled with polyurethane (P.U) form of 40kg/m3. Overall size of frame section should be of 50mm x 50mm. With necessary corner brackets, stiffeners, hinges, and screws. Cement Bonded particle board shutter (Bison Panel or Equivalent) “Single Leaf” with all round styles “U” section of size 12m x 18m x 12mm made from 0.6 mm thick galvanized, colour coated cold rolled steel profiles with 16mm thick Cement Bonded particle Board (Bison Panel or Equivalent) with necessary screws fixed at every 1’-0” (304.8mm) intervals. The cost inclusive of MS nickel coated Aldrop of size 250mm long 2nos. 200mm long tower bolt 1no., 125mm handles 2nos., cost and conveyance of all materials at site and applying one

1 Sqm 2225.00

coat primer , one coat of luppum and two coats of synthetic enamel paint as per approved design for finished item of work

Box Type Cup Board using Cement Bonded Particle Board (Bison Panel or Equivalent) & Shutter using Pre-Laminated Cement Bonded Particle Board (Bison Lam or Equivalent)

771 Supply and fixing of box type cup board using 20mm thick Cement Bonded Particle Board (Bison Panel or Equivalent) for making frame of size 100mm x 35mm using two sandwiched 16mm boards, one plain board and one Pre-Laminated cement

1 Sqm 3178.00

38

Building Items

S.No


FOR 2007-08

bonded particle board with plain 35mm wood lipping. The Shutters are made of 16m thick Pre-Laminated Cement Bonded Particle Board (Bison Lam or Equivalent) of approved shade inclusive of hardware like M.S. powder coated Piano hinges of size ¾” x ¾” , Aluminium powder coated handles of size 4” (101.6mm), Aluminium tower bolt 4” (101.6mm) Gore locks, screws, wood lipping and Fevicol etc., complete finish item of work.

Door Shutter with Cement Bonded Particle Board (Bison Lam or Equivalent)

772 Supply and fixing of door shutter made out of PVC Hollow extruded section having dimensions of 47mm x 26mm with wall thickness of 1.5mm with necessary tapering to house Bison Lam thickness of 12mm. All the four corners are jointed with PVC ‘L’ brackets of size 4’’ x 8’’ (101.6 x 203.2mm) and the PVC lipping is filled with well-seasoned country wood to hold hinges. The hardware consists of 250mm long aldrop – 2 Nos.250mm Handle- 1 No. (all are of Aluminium). The cost is inclusive of all incidental, labour transportation charges.

1 Sqm 1459.00

Double Skin Partition with Pre Laminated Cement Bonded Particle Board (Bison Lam or Equivalent)

773 Supply and fixing double skin partition made out of G.I track section of size 50 mm x 35mm x 0.55mm for fixing to the roof and floor and stud section of size 48mm x 35mm x 0.55mm placed in track section vertically at 610mm intervals and at 1200mm internals horizontally. The frame is fixed by means of self expansion screws and caps to the wall / roof. 12mm thick Pre Laminated Cement bonded particle board (Bison Lam or equivalent) is to be fixed both sides of the frame work by using 2mm thick electro plated CR flat section leaving 3mm gap between two panels. The cost inclusive of cost and conveyance of all materials to sites, other materials incidentals and labour charges as per the direction of Engineer in charges.

1 Sqm 1930.00

Wall Panelling with Pre Laminated Cement Bonded Particle Board (Bison Lam or equivalent)

774 Supply and fixing of wall panelling with frame work made of G.I stud section of size 48mm x 35mm x 0.55mm thick placed at every 610mm intervals vertically and at 1200mm internals horizontally fixed to the wall by means of self expansion screws and caps. 12mm thick pre laminated Cement bonded particle board (Bison Lam or equivalent) is to be fixed to frame by means of self-taping screws placed at every 300mm intervals leaving 3mm gap between two panels. The cost inclusive of Conveyance of materials, Labour charges etc., complete as per the direction of Engineer in charge.

1 Sqm 1555.00

Aluminium Partition with Pre Laminated Cement Bonded Particle Board (Bison Lam or Equivalent)

775 Supply and fixing in position aluminium glazed partitions using 5.50 mm thick plain glass to full height using with pre laminated cement bonded particle board (Bison Lam or equivalent) of 10mm thick to a height of 0.91 metre at bottom panel and remaining height with glass and aluminium sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness with one metre centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars by M.S. flats, bolts and nuts including cost and

1 Sqm 2387.00

39

Building Items

S.No


FOR 2007-08

conveyance of all materials etc., complete as directed during execution.

Specification for Bison lam windows with Pre-Painted Steel Sections

Supply and fixing of factory made windows fabricated from pre-painted Cold Rolled formed sections made of galvanized steel colour coated sections (Base steel as per IS-512 D quality, galvanized as per IS-277 with zinc of 120 grams/sqm) with total coated thickness of 0.6mm primer coated with epoxy primer of 5-7 microns thick, finish painted with polyester paint of 12-16 microns and back coated with alkyd backer of 5-7 microns), the section for outer frame and centre mullion (duly filled with PU form of 40 Kg/Cum) should be of 60mm X 50mm, with provision for fixing glazed shutter. The section for glazed/ panelled shutter should be of size 47mm X 20mm and another section of size 60mm X 23mm should be provided for separating glazed and panelled portion. The sections are cut to length and miter jointed with plastic corner brackets. The size of the corner brackets for a window outer frames 50mm X 60mm. The mullion section is to be fixed to the frame with plastic mullion cap

1. Stiffener plates of size 60mm X 50mm made of 1.25mm thick CRCA electroplated are to be provided to fix window frames to concrete/masonry. Gasket is to be provided for fixing glass. 10mm thick pre laminated (Bison lam or equivalent) cement bonded particle board both sides. 5mm thick colour pin headed glass is to be provided for glazing and providing guard bars of 10mm square rods duly welded at 100mm pitch to MS flat section of size 18mm and 3mm thick. Windows are to be fixed to wall by means of self expansion nylon cap(75) and electroplated wooden screws of size 100mm, together with the following (Supply and fixing) Aluminium powder coated fittings.

1) 75mm long grip handles 1 no per shutter. 2) 75mm long tower bolts 2 nos. per shutter. 3) Heavy duty SS pivot hinges 2 nos. per shutter. 4) MS powder coated telescopic stay 1 no per shutter.

BISON LAM WINDOWS WITH PPS SECTIONS 776 Single Shutter 2’0” X 4’0” outer frame section size of 50mm X

60mm shutter frame section size of 47mm X 20mm and 60mm X 23mm section provided for shutter frame mullion

1 Sqm 3456.00

777 Double shutter 3’0” X 4’0” outer frame section size of 50mm X 60mm shutter frame section size of 47mm X 20mm, Mullion section size of 50mm X 60mm for outer frame, and 60mm X 23mm section provided for shutter frame mullion

1 Sqm 3489.00


1 Sqm 3842.00


1 Sqm 3456.00

780 Centre fixed both side openable shutters 6’0” X 4’0” outer frame section size of 50mm X 60mm shutter frame section size of 47mm X 20mm, Mullion section size of 50mm X 60mm fixed

1 Sqm 3103.00

40

Building Items

S.No


FOR 2007-08

beading section size of 18mm X 25mm, and 60mm X 23mm section provided for shutter frame mullion.

DOUBLE DOOR SHUTTER WITH CEMENT BONDED PARTICLE BOARD

(BISON PANEL OR EQUIVALENT) 781 Supply and fixing of BISON PANEL door shutter with all round

style “U” size of 20mm X 18mm X 20mm made from 0.6mm thick galvanized pre-painted cold rolled steel profiles with 16mm thick bison panel (cement bonded particle board) separating two shutters with 30mm X 18mm X 30mm Stepped lipping with necessary screws fixed at every 1’-0” (304.8mm) intervals. MS Nickel coated 250mm long aldrops 2 no’s, MS powder coated 250mm long tower bolt 2 no’s, & 2no’s MS powder coated 125mm long grip handle. Including cost and conveyance of all materials at site and applying one coat of primer, 2 coats of luppum and 2 coats of synthetic enamel paint as per approved design for finished item of work

1 Sqm 1553.00

SINGLE SHUTTER WITH BISON LAM CEMENT BONDED PRE LAMINATED PARTICLE BOARD

(BISON OR EQIVALENT) 782 Supply and fixing of BISON LAM cement bonded pre-laminated

particle board single door shutter with all round section “U” size of 20mm X 18mm X 20mm made from 0.6mm thick galvanized pre-painted cold rolled steel profiles with 16mm thick bison lam (pre-laminated cement bonded particle board) with necessary screws fixed at every 1’-0” (304.8mm) intervals. The cost inclusive of MS Nickel coated 250mm long aldrops 2 no’s, MS powder coated250mm long tower bolt 1 no’s, 2no’s MS powdercoated125mm long grip handle, 1 no’s M.S.P.C. Door stopper. Including cost and conveyance of all materials at site labour charges etc., complete finished item of work

1 Sqm 1660.00

DOUBLE SHUTTER WITH BISON LAM CEMENT BONDED PRE LAMINATED PARTICLE BOARD

(BISON OR EQUIVALENT) 783 Supply and fixing of BISON LAM cement bonded pre-laminated

particle board single door shutter with all round ”U” section size of 20mm X 18mm X 20mm made from 0.6mm thick galvanized pre-painted cold rolled steel profiles with 16mm thick bison lam (pre-laminated cement bonded particle board) separating two shutter with 30mm X 20mm X 30mm stepped lipping with necessary screws fixed at every 1’-0” (304.8mm) intervals. The cost inclusive of MS Nickel coated 250mm long aldrops 2 no’s, MS powder coated 250mm long tower bolt 1 no’s, 2no’s MS powder coated 125mm long grip handle, 2 no’s M.S.P.C. Door stopper. Including cost and conveyance of all materials at site labour charges etc., complete finished item of work

1 Sqm 1778.00

Inssula or Equivalent Mineral Fibre Ceiling Tiles :

Inssula Ceiling Tile of 0.595 mm x 0.595 mm of 13 mm thick Square Edge

784 Fissura Fine Model 1 Sqm 286.00785 Speckle Model 1 Sqm 319.00786 Textura Model 1 Sqm 352.00

41

Building Items

S.No


FOR 2007-08

Inssula Ceiling Tile of 0.595 mm x 0.595 mm of 15 mm thick Standard Regular Edge

787 Fissura Fine Model 1 Sqm 369.00788 Speckle Model 1 Sqm 385.00789 Textura Model 1 Sqm 418.00

Inssula or Equivalent Grid Suspended Ceiling System : Providing & fixing Pre-coated G.I. Wall angle size 19 mm x 19

mm x 0.30 mm thick of 3600 mm long fixed to the brick wall/partition at the perimeter of ceiling with nylon sleeves and screws at 610 mm centres. Then suspending main G.I. Frame "T" section size of 38 mm x 24mm x 0.30mm thick of 3600mm long from soffit in one direction with the help of Rawl Plug and G.I. wire/Rod of 4 mm diameter with 1220 mm centres G.I. Cross "T" section of size 25mm x 24mm x 0.30mm thick of 600mm long is inserted into the slots provided in main "T" at 600mm centres to form a grid of 600mm x 600mm. Inssula or equivalent 13/15mm tiles of size 0.595 mm x 0.595 mm can be laid on to the grid etc. as per specification and as directed by department Officers.

Using 13 mm thick Square Edge laid on to the Grid 790 Fissura Fine Model 1 Sqm 605.00791 Speckle Model 1 Sqm 644.00792 Textura Model 1 Sqm 682.00

Using 15 mm thick Standard Regular Edge laid on to the Grid 793 Fissura Fine Model 1 Sqm 770.00794 Speckle Model 1 Sqm 825.00795 Textura Model 1 Sqm 880.00

SINTEX OR EQUIVALENT DOOR (SINGLE PANEL) 796 Supply and fixing Sintex or equivalent doors are made out of

PVC section and panels. The overall dimension of the same is 33mm X 47mm with usual process variation and having a wall thickness of 1.5mm with a variation of ± 0.3mm. The infill is seamless hallow multi chambered PVC single panel having an effective dimension of 762mm X 20mm having a wall thickness of 1mm ± 0.3mm complete, for finished item of work.

Sqm. 2018.00

797 Supply and fixing PVC door frames made from extruded sections in overall dimensions of 40 X 48mm having a wall thickness of 1.5mm with usual process variation of ± 0.3mm, complete, for finished item of work.

1 RM. 189.00

SINTEX OR EQUIVALENT OPENABLE WINDOW 798 Supply and fixing of Sintex window shall be made out of

extruded PVC section. The outer frame having overall dimensions of 40 X 48mm with a wall thickness of 1.5mm with usual process variation of ± 0.3mm. The shutter frame having with overall dimensions of 26 X 47mm with wall thickness of 1.2mm ± 0.3mm provided with 5mm glazing. The centre mullion having over all dimensions of 25 X 32.5mm ±0.3mm, complete, for finished item of work.

1 Sqm. 3008.00

SINTEX OR EQUIVALENT SLIDING 2 TRACK WINDOWS

42

Building Items

S.No


FOR 2007-08

799 Supply and fixing of two track or three track sliding window the outer frame shall be 58 X 45mm with a wall thickness of 1.2mm ± 0.3mm. The sliding shutter frame is made of PVC section 57 X 32mm with overall dimensions of 1.5mm ± 0.3mm provided with 5mm glazing. Roller bearings and arrestor type handle cum lock shall be provided, complete, for finished item of work.

1 Sqm. 2680.00

SINTEX OR EQUIVALENT FALSE CEILING 800 Supply and fixing of PVC false ceiling on MS/GI made skeleton

framework. The frame shall be 24 X 48mm MS tube section fixed along with the wall. The entire frame work shall be concealed with PVC section having overall dimensions of 6 X 250mm with a wall thickness of 1mm ± 0.3mm with tongue and groove system, provided with necessary arrangements for electrical connections, complete, for finished item of work.

1 Sqm. 1335.00

SINTEX OR EQUIVALENT WALL PANELLING 801 Supply and fixing of wall panelling on the framework of wooded

rippers of 24 X 24mm of required size. The entire framework shall be panelled with PVC section having overall dimensions of 6 X 250mm with a wall thickness of 1mm ± 0.3mm. The panels are joined with tongue and groove system. Necessary cutouts for electrical connections to be provided at required places complete, for finished item of work.

1 Sqm. 1273.00

SINTEX OR EQUIVALENT PVC CABINETS 802 Supply and fixing of PVC cupboards for kitchen and bedrooms

shall be made out of multi chambered PVC sections having overall dimensions of 20 X 762mm with a wall thickness of 1.2mm ± 0.3mm. The cabinets shall be made as per the requirements of the room with groove system. The PVC section surface shall be plain and laminated finish to have good look, completed, for finished item of work.

1 Sqm. 3682.00

SINTEX OR EQUIVALENT SMC SIGN BOARDS

Supply of hot pressed compression moulded SMC sign plates for making road signs ass per the approved dimensions of National Highway Authority Of India, complete, for finished item of work.

803 Circular sign plate Dia 400mm. Each. 506.00804 Circular sign plate Dia 600mm. Each. 1330.00805 Circular sing plate Dia 870mm Each. 2665.00806 Triangular sign plate 600mm. Each. 683.00807 Triangular sign plate 900mm. Each. 1542.00808 Square sign plate 600mm. Each. 1236.00809 Square sign plate 1000mm. Each. 4591.00

SINTEX OR EQUIVALENT PVC PARTITION 810 Supply and fixing of PVC Double Skin Partition. The entire

framework shall be carried out by mild steel section having overall dimensions of 24 X 48mm with a wall thickness of 1.2mm. The entire framework shall be concealed with PVC section having overall dimensions of 6 X 250mm with a wall thickness of 1mm ± 0.3mm both sides. Glass provision/Door provision can be provided along the partition wherever required. Partitions can be made full or half as per requirement complete, for finished item of work.

Sqm. 2441.00

SINTEX OR EQUIVALENT WATER STORATGE TANKS 811 Supply of Sintex or equivalent Polyethylene water storage tank Ltr. 7.00

43

Building Items

S.No


FOR 2007-08

double layer confirming to ISI 12701/96 mark with lid. PVC DOOR SHUTTER (Nandi or Equivalent)

812 Supply and fixing of door shutters made of rigid PVC extruded hollow section(Nandi or equivalent) of 20mm X 200 mm with the wall thickness of 1.0mm +/- 0.1mm equally divided into 4 no's with tongue and groove locking arrangements. The shutter frame is made of 58 X 24 mm with the wall thickness of 1.5mm +/- 0.15mm section mitre-cut and joined at 4 corners with 125mm X 225mm plastic brackets. The shutter shall be horizontally reinforced with 2 no's of 8mm PVC rods. Teak wood batons shall be reinforced inside the door shutter during the fabrication of the door shutter at those points wherever the hardware is fixed on to the door shutter.

Sqm. 1359.00

813 Supply and fixing of door shutters made of rigid PVC extruded hollow section(Nandi or equivalent) of 20mm X 200 mm with the wall thickness of 1.0mm +/- 0.1mm equally divided into 4 no's with tongue and groove locking arrangements. The shutter frame is made of 30mm X 79mm with the wall thickness of 1.5mm +/-0.15mm section mitre-cut and joined at 4 corners with 125mm X 225mm plastic brackets. The shutter shall be horizontally reinforced with 2 no's of 8mm PVC rods. Teak wood batons shall be reinforced inside the door shutter during the fabrication of the door shutter at those points wherever the hardware is fixed onto the door shutter.

Sqm. 1553.00

PVC DOOR FRAME (Nandi or Equivalent) 814 Supply and fixing of door frame made of hollow extruded PVC

section (Nandi or equivalent) having dimensions of 40 X 57mm with the wall thickness of 2mm +/- 0.2mm duly reinforced with seasoned wood plank at the hinges side. The door frame top 2 corners shall be metri-cut/ weilded.

1 RM 186.00

815 Supply and fixing of door frame made of hollow extruded PVC section (Nandi or equivalent) having dimensions of 40 X 46 mm with the wall thickness of 2mm +/- 0.2mm duly reinforced with seasoned wood plank at the hinges side. The door frame top 2 corners shall be mitre cut/welded

1 RM 162.00

PRE- PAINTED STEEL, WINDOWS, VENTILATORS & DOOR FRAMES.

Supply and fixing of windows & top Hung and fixed louvered ventilators made of pre - painted steel (base steel as per IS 513 of -0.6 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be 46 x 52 mm section for shutter should be 46 x 46 mm section for mullion should be 46 x 70 mm, and section for beading should be 18 x 25 mm and section for louvered ventilation should be 33 x57mm Box section. The windows should be panelled with 5mm thick plain float glass & 4 mm pinhead glass for ventilators with Ethyl propylene Diamine monomer Gasket (EPDM). The sections are to be cut to length mitre joined with corner brocket centre mullions are to be fixed using mullion cap. Handle made of high grade aluminium powder coated and nylon receiver. Gaskets made of Ethyl propylene Diamine monomer(EPDM).

Corner brackets made of CRCA with Zinc Phosphate. Mullion caps made of glass filled nylon. The above frames should be

44

Building Items

S.No


FOR 2007-08

fixed to the concrete /masonry wall by means of self expanding screws. including 10 mm square guard bars with 6" pitch complete for finished item of work.

Windows 816 Single shutter 2'0 x 4'0 (609.6 x 1219.2 mm ) Outer frame

section size of 46 x 52 mm shutter frame section size of 46 x 46 mm

1 sqm 3866.00

817 Double shutter 3'-0" x 4'-0" (914.4mm x 1219.2 mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm

1 Sqm 3866.00

818 Double shutter 3'-0" x 4'-0" (914.4mm x 1219.2 mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm

1 Sqm 4097.00

819 Double shutter 4'-0" x 4 '-0" (1219.2x12.19.2mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm

1 Sqm 3866.00

820 Double shutter 4'-0" x 4 '-0" (1219.2x1219.2mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm

1 Sqm 4097.00

821 Double shutter 4'-6" x 4 '-6" (1371.6x1371.6mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm

1 Sqm 3652.00

822 Centre fixed both side openable shutter 5'-0" x 4'-0" (1524x1219.2mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm fixed beading section size of 18 x 25 mm

1 Sqm 3652.00

823 Centre fixed both side openable shutter 6'-0" x 4'-0" (1828.8x1219.2mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm fixed beading section size of 18 x 25 mm

1 Sqm 3652.00

824 Centre fixed both side openable shutter 6'-0" x 4'-6" (1828.8x1371.6mm) outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm fixed beading section size of 18 x 25 mm

1 Sqm 3652.00

Ventilators : 825 Top Hung 2 '-0" x 2'-0" (609.6x609.6mm) outer frame section

size of 46mm x 52 mm shutter frame section size of 46mm x 46 mm

1 Sqm 4235.00

826 Top Hung 4 '-0" x 2'-0" (1219.2x609.6mm) outer frame section size of 46 x 52 m shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm

1 Sqm 4235.00

827 Top Hung 4 '-0" x 3'-0" (1219.2x914.4mm) outer frame section size of 46 x 52m m shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm

1 Sqm 4235.00

828 Fixed louvers 2'-0" x 2'-0" (609.6x609.6mm)(Box section) outer frame section size of 33 x 57 mm

1 Sqm 2899.00

829 Fixed louvers 4'-0" x 2'-0" (1219.2x609.6mm)(Box section) outer frame section size of 33 x 57 mm Mullion section size of 33 x 57

1 Sqm 2899.00

830 Fixed louvers 4'-0" x 3'-0" (1219.2x914.4mm) (Box section) outer frame section size of 33 x 57 mm Mullion section size of 33 x 57

1 Sqm 2899.00

45

Building Items

S.No


FOR 2007-08

NCL or Equivalent ECO 3000 SERIES WINDOWS (SUITABLE FOR RESIDENTIAL BUILDINGS WITH GRILL PROVISION)

Providing and Fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.6mm thick galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 48x50mm, centre mullion should be of 48x50mm, section for shutter should be of 47x20mm and Fixed glass beading section should be of 12x12mm. Outer frame and mullions to have rebate for Glazed shutter and a 20mm provision for Guard bars/Grills. The sections are to be cut to length metre joined with corner bracket. Centre mullion is to be fixed with mullion cap. Seccolor Handle, seccolor stay, 2 nos. of Stainless Steel heavy duty Pivot hinges shall be provided per shutter. The windows should be panelled with 5mm thick plain float glass. Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self

expanding screws, Including 10mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work.

831 Single shutter Window 2’0”x4’0” (609.6mm x 1219.2mm). Outer frame section size of 48x50mm shutter frame section size of 47x20mm.

1 Sqm 3559.00

832 Double shutter Window with vertical mullion 3’0” x 4’0” ( 914.4mm x 1219.2mm) outer frame section size of 48x50mm shutter frame section size of 47x20mm. Mullion section size of 48x50mm.

1 Sqm 3790.00

833 Double shutter Window with vertical member4’0” x 4’0” (1219.2mm x 1219.2mm) outer frame section size of 48x50mm shutter frame section size of 47x20mm and mullion section should be of 48x50mm.

1 Sqm 3790.00

834 Centre fixed both side openable shutter window 5’0”x4’0” (1524mm x1219.2mm). Outer frame section size of 48x50mm. Shutter frame section size of 47x20mm. Mullion section size of 48x50mm. Fixed beading section size of 12x12mm.

1 Sqm 3344.00

835 Centre fixed both side openable shutter window 6’0”x4’0” (1828.8mm x1219.2mm). Outer frame section size of 48x50mm. Shutter frame section size of 47x20mm. Mullion section size of 48x50mm. Fixed beading section size of 12x12mm.

1 Sqm 3344.00

NCL or Equivalent ECO 4000 SERIES WINDOWS (SUITABLE FOR RESIDENTIAL BUILDINGS WITH GRILL & FLYMESH PROVISION)

Providing & Fixing of windows made of pre-painted steel (Base Steel as per IS 513 of 0.6mm thick galvanized as per IS 277 with zinc of 150 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, Section for fixed glass beading section should be of 12x12mm and section for shutters should be of 47x20mm. Outer frame & mullion sections to have

46

Building Items

S.No


FOR 2007-08

rebate for glazed shutters, fly mesh and a 20mm provision for guard bars/grills. Fly mesh shutter section should be of 20x40mm. The sections are to be cut to length metre joined with corner bracket. Centre mullions are to be fixed with mullion cap, seccolor stay, seccolor handles, seccolor latch 2 Nos of heavy duty stainless steel pivot hinges shall be provided per Shutter. The windows should be panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter(304 grade).

Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm Square guard bars with 6” (152.4mm) pitch , complete for finished item of work

836 Single shutter Window 2’0”x4’0” (609.6mm x 1219.2mm). Outer frame section size of 72x50mm shutter frame section size of 47x20mm.

1 Sqm 4725.00

837 Double shutter Window with vertical mullion 3’0” x 4’0” ( 914.4mm x 1219.2mm) outer frame section size of 72x50mm shutter frame section size of 47x20mm. Mullion section size of 72x50mm.

1 Sqm 4956.00

838 Double shutter Window with vertical member4’0” x 4’0” (1219.2mm x 1219.2mm) outer frame section size of 72x50mm shutter frame section size of 47x20mm and mullion section should be of 72x50mm.

1 Sqm 4956.00

839 Centre fixed both side openable shutter window 5’0”x4’0” (1524mm x1219.2mm). Outer frame section size of 72x50mm. Shutter frame section size of 47x20mm. Mullion section size of 72x50mm. Fixed beading section size of 12x12mm.

1 Sqm 4511.00

840 Centre fixed both side openable shutter window 6’0”x4’0” (1828.8mm x1219.2mm). Outer frame section size of 72x50mm. Shutter frame section size of 47x20mm. Mullion section size of 72x50mm. Fixed beading section size of 12x12mm.

1 Sqm 4511.00

Fly mesh Shutters Supply & fixing of Fly mesh shutters of size 20 x 40 mm fly

proof mesh with std. Spn (S.S.) fly mesh including cost and conveyance of all materials, and labour charges etc. complete for finished item of work.

841 Single shutter 2'-0" x 4'-0" (609.6x1219.2mm) shutter section size 20 x 40 mm

1 Sqm 889.00

842 Double shutter 3'-0" x 4'-0" (914.4 x 1219.2mm) shutter section size 20 x 40 mm

1 Sqm 889.00


1 Sqm 889.00

Supply & fixing of Fly mesh shutters of size 20 x 40 mm fly proof mesh with Netlon fly mesh including cost and conveyance of all materials, and labour charges etc. complete for finished item of work.

844 Single shutter 2'-0" x 4'-0" (609.6x1219.2mm) shutter section size 20 x 40 mm

1 Sqm 766.00


1 Sqm 766.00


1 Sqm 766.00

Door frames

47

Building Items

S.No


FOR 2007-08

Supply & fixing of Door frames made of all formed sections of 1.25mm thick CRCA section, size should be 50x60mm with 32mm rebate. The corner of the frame should be welded. The frame should be painted with one coat of primer and finished painted with pure polyester paint. The frame should be provided with approved quality butt hinges of 3 Nos. complete for finished item.

847 Single shutter 3'-0" x 7'-0" (914.4x2133.6mm) outer frame section size of 50 x 60 mm

1RM 177.00

848 Double shutter 5'-0" x 7'-0" (1524 x 2133.6mm) outer frame section size of 50 x 60 mm

1 RM 177.00

Supplying & fixing of Door frame made of roll formed section of 1.25 mm thick CRCA section, size should be 50 x 60 mm with 32 mm rebate. The corner of the frame should be welded. The frame should be painted with one coat of primer and finished painted with pure polyester paint. The frame should be provided with approved quality butt hinges of 3 Nos. Complete for finished item of work.

849 Single shutter 3'-0" x 7'-0" (914.4x2133.6mm) outer frame section size of 50 x 75 mm

1 RM 202.00

850 Single shutter 5'-0" x 7'-0" (1524x2133.6mm) outer frame section size of 50 x 75 mm

1 RM 202.00

NCL or Equivalent Structural Glazing: 851 Providing and Fixing Structural Glazing fabricated from Roll

formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.6mm thick. Galvanized steel sections are to be sued as stiffeners inside the colour coated steel/powder coated sections as per the design requirement. Design calculations are made of suit wind pressures as given in IS 875. Primer coat with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The vertical section should be of 50mm x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame horizontal section, stiffener section should be 48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58mm, Glass holding section should be of 37mm x 37mm & 37mm x 18mm.

Including 5mm thick Ocean Blue reflective glass. Brackets made of CRCA powder coated/Electroplated should be used to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement. Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used. Wall fixing of sections to concrete/masonry wall should be with self-expanding cap & screws. The rate is inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and scaffolding charges, form work etc. complete for finished item of work.

Structural Glazing: 1 sqm 4350.00 NCL or Equivalent Top Hung in Structural Glazing:

48

Building Items

S.No


FOR 2007-08

852 Providing and Fixing Top Hung shutters in Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel/powder coated sections as per the design requirement. Design calculations are made to suit wind pressures as given in IS 875. Primer coat with epoxy primer of 5-7 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The outer frame should be of 20mm x 58mm x 0.6mm, Shutter section should be of 58mm x 33mm x 0.72 mm, stiffener section should be 56mm x 31mm x 1mm. EARL Bihari Hinges – 2 Nos for each shutter and Aluminium Stays – 2 Nos. for each shutter, Aluminium Handle – 1 no. for each shutter.

The rate is inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and scaffolding charges, form work etc. complete for finished item of work

Top Hung Shutter 1 sqm 3500.00 NCL or Equivalent Partitions: Supply and fixing of partitions made of seccolor pre-painted

steel (base steel as per IS 513 of 0.6mm thick ‘D’ quality, galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick alkyd backer. Section for outer frame should be 46x52mm, section for shutter should be 46x46mm, section for mullion should be 46x70mm, section for beading should be 18x25mm and section for middle and bottom rail (Lock Rail and Kick Rail) of size should be 23x130mm. The partition should be panelled with 9mm pre-laminated particle board to a height of 0.91m from the bottom, and remaining height with 5mm thick plain glass. with Ethyl Propylene Diamine Monomer (EPDM) Gaskets. The sections are to be cut to length, mitre joined with corner bracket Centre mullions are to be fixed using mullion cap. Gaskets made of Ethyl Propylene Diamine Monomer (EPDM).

Corner brackets made of CRCA with zinc phosphating. Mullion caps made of Glass filled nylon. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws, and complete for finished item of work.

853 Fixed Partition: Outer frame section size of 46x52mm, mullion section should be of 46x70mm, fixed beading should be of 18x25mm.

1 sqm 2974.00

854 Fixed Partition with Door: Outer frame section size of 46x52mm, mullion section should be of 46x70mm, fixed beading should be of 18x25mm, section for shutter should be of 46x46mm and section for middle & bottom should be of size 23x130mm

1 sqm 3392.00

49

Building Items

S.No


FOR 2007-08

855 Providing and fixing door frames fabricated from sections made of galvanized steel powder coated (base steel as per IS 513, galvanised as per IS 217 with zinc of 120 grams / square metre). The factory made section should be with a Powder Coating of pure Polyester Powder of 50-60 microns thick with total coated thickness of 1.25 mm. Size of door frame section should be of 105x60mm with a rebate of 38mm to accommodate 35mm thick door shutter. The frame section should have groove to insert gasket. The section of the door and fan light frame is to be filled with polyurethane foam. The frame section should be cut to length, miter joined with CRCA electroplated corner brackets.Each frame should be provided with:a) 2mm thick MS powder coated butt hinges of 100nn long – 3

Nos. for single shutter, 6 Nos. for double shutter.b) CRCA Electroplates stiffeners of 6 Nos. – 3 in each vertical.c) 40mm x 200mm x 1.2mm hold fasts screwed to stiffeners –

6 Nos. with split end tail.d) Nylon Aldrop Receiver – 1 No. for single shutter frame. e)Tie Rod – 1 No

1 RM 485.00

ELIXIR OR EQUALENT DOOR FRAMES Supply and fixing of factory made Internal door frames without

threshold, fabricated from pre-painted cold roll formed section 100mm x 60 mm made of galvanized ( base steel as per IS – 513 ‘D’ quality, galvanized as per IS-277 with Zinc of 120 gms/sqm) steel colour coated sections with total coated thickness of 1 mm, primer coated with epoxy primer of 5-7 microns thick, finish painted with polyester paint of 12-16 microns and back coated with alkyd backer of 5-7 microns. The frame section is to be filled with polyurethane (P.U. Foam) of 40 Kg/Cum; and the sections are cut to length and miter joined by means of 1.25mm thick CRCA electroplated corner brackets of size 75 x 75 mm and 1.25mm thick electroplated stiffeners of size 150mm for fixing hold fasts and hinges together with the following MS Power coated fitting (Supply and fixing ) of approved make

a) 6 Nos M.S. Z. Type hold fasts made of 30mm x 3 mm MS flat of 230mm long, 3 Nos each side expandable PVC covered screw type fasteners

b) 2.5 mm x 300 mm long ‘T’ hinges / 2.5mm x 50 mm x 100mm two way but hinges (3 Nos for single leaf or 2 Nos for Double leaf /leaf )

856 c) 12 mm Dia MS tie rod at bottom with necessary size of nuts on either side

1 RM 350.00

50

Building Items

S.No


FOR 2007-08

Supply and fixing of factory made Bathroom door frames without threshold, fabricated from pre-painted cold roll formed section 50mm x 50 mm made of galvanized ( base steel as per IS – 513 ‘D’ quality, galvanized as per IS-277 with Zinc of 120 gms/sqm) steel colour coated sections with total coated thickness of 1 mm, primer coated with epoxy primer of 5-7 microns thick, finish painted with polyester paint of 12-16 microns and back coated with alkyd backer of 5-7 microns. The frame section is to be filled with polyurethane (P.U. Foam) of 40 Kg/Cum; and the sections are cut to length and miter joined by means of 1.25mm thick CRCA electroplated corner brackets of size 75 x 75 mm and 1.25mm thick electroplated stiffeners of size 150mm for fixing hold fasts and hinges together with the following MS Power coated fitting (Supply and fixing) of approved make.

a) 6 Nos M.S. Z. Type hold fasts made of 30mm x 3 mm MS flat of 230mm long, 3 Nos each side expandable PVC covered screw type fasteners

b) 2.5 mm x 300 mm long ‘T’ hinges / 2.5mm x 50 mm x 100mm two way but hinges (3 Nos for single leaf or 2 Nos for Double leaf /leaf )

857 c) 12 mm Dia MS tie rod at bottom with necessary size of nuts on either side.

1 RM 297.00

SPECIFICATION OF HARDWYN OR EQUIVALENT DOOR CLOSER ISI MARKED

858 Providing and fixing IS:3564 marked Aluminium Die cast body tubular type universal hydraulic door closer, Hardwyn make (Classic Queen) with necessary accessories and screws etc complete

Each 499.00

859 Providing and fixing IS:3564 marked Aluminium Extruded Section body tubular type universal hydraulic door closer with double speed adjustment, Hardwyn make (Mytel) with necessary accessories and screws etc complete

Each 665.00

860 Providing and fixing IS:3564 marked Aluminium Extruded Section body tubular type universal hydraulic door closer with double speed adjustment, Hardwyn make (Eddy) with necessary accessories and screws etc complete

Each 784.00

861 Providing and fixing IS:3564 marked Aluminium Extruded Section body tubular type universal hydraulic door closer with double speed adjustment, Hardwyn make (Gazel) with necessary accessories and screws etc complete

Each 820.00

SPECIFICATION OF HARDWYN OR EQUIVALENT FLOOR SPRING ISI MARKED

862 Providing and fixing double action hydraulic floor spring of approved brand manufacture IS : 6315 marked, Hardwyn make (U-32) for doors including cost of cutting floors as required, embedding in floors and S.S cover plates with Aluminium Pivot and single piece M.S. Sheet outer box with slide plate etc. complete (Weight Capacity up to 130 Kgs)

Each 1984.00

863 Providing and fixing double action hydraulic floor spring of approved brand manufacture IS : 6315 marked, Hardwyn make (U-32) for doors including cost of cutting floors as required, embedding in floors and Brass cover plates with Aluminium Pivot and single piece M.S. Sheet outer box with slide plate etc. complete (Weight Capacity up to 130 Kgs)

Each 2103.00

51

Building Items

S.No


FOR 2007-08

864 Providing and fixing double action hydraulic floor spring of approved brand manufacture Hardwyn make (U-88) for doors including cost of cutting floors as required, embedding in floors and S.S cover plates with Aluminium Pivot and single piece M.S. Sheet outer box with slide plate etc. complete (Weight Capacity up to 80 Kgs)

Each 1485.00

865 Providing and fixing double action hydraulic floor spring of approved brand manufacture Hardwyn make (U-88) for doors including cost of cutting floors as required, embedding in floors and Brass cover plates with Aluminium Pivot and single piece M.S. Sheet outer box with slide plate etc. complete (Weight Capacity up to 80 Kgs)

Each 1604.00

Curtain Glazing NCL Supply and fixing of curtain Glazing made of pre painted steel

(base steel as per IS 513 of 0.6 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12- 16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be 46 x 52 mm, section for mullion should be 46 x 70 mm and section for beading should be 18 x 25 mm. The Glazing should be panelled with 5 mm thick plain float Glass with Ethyl Propylene diameine Monomer (EPDM) Gaskets. The sections are to be cut to length, mitre joined with corner bracket. Centre mullions are to be fixed suing mullion cap. Handle made of high grade Aluminium powder coated and nylon receiver. Gaskets made of Ethyl propylene Diamine Monomer (EPDM) Corner brackets made of CRCA with zinc phosphating. Mullion caps made of Glass filled nylon. The above frames should be fixed to the concrete / masonry wall be means of self expanding screws. & complete for finished item.

866 Fixed Glazing 2'-0" x 2'-0" (609.6x609.6mm) grid outer frames section size of 46 x 52 mm

1 Sqm 3575.00

Mullion section size of 46 x 70mm Beading section size of 18 x 25 mm

867 Fixed Glazing 2'-0" x 3'-0" (609.6x914.4mm) grid outer frame section size of 46 x 52 mm

1 sqm 3575.00

Mullion section size of 46 x 70 mm Beading section size of 18 x 25 mm


1 sqm 3042.00

Mullion section size of 46 x 70 mm Beading section size of 18 x 25 mm


1 sqm 3042.00

Mullion section size of 46 x 70 mm Beading section size of 18 x 25 mm ALUMINIUM DOORS AND WINDOWS

870 Supplying Aluminium Door frames with rectangular box hollow section (including annodization cost)

1 Kg 200.00

871 Supplying Aluminium annodised openable sliding window, Ventilator (including ammonisation cost)

1 Kg 200.00

872 A.C sheet Corrugated 6 mm thick 1 sqm 188.00

52

Building Items

S.No


FOR 2007-08

873 A.C sheet plain 4 m thick 1 sqm 135.00874 A.C sheet plain 6 m thick 1 sqm 140.00875 Sun Control film to the glazed windows partition including

labour charges.1 sqm 285.00

876 Aluminium Venetian Blinds horizontal 25.4 mm wide with all accessories.

1 sqm 727.00

877 Aluminium Venetian Blinds horizontal 20.0 mm wide with all accessories.

1 sqm 693.00

878 Venetian blinds Vertical 100 mm wide with all accessories. 1 sqm 1176.00879 S&F of marblex flooring with 2.0 mm thick in rolls. 1 sqm 369.00

880 S&F Vinyl Flooring with 1.5 mm thick in rolls 1 sqm 369.00

Providing Chemical Water proof treatment with Brick bat coba & chemical cement mortars to exposed RCC roof slab surfaces to required slopes mixed with water proofing chemical compound, laid over roof slab and brickbat coba treatment in chemical cement mortar 120/100 mm thick at the centre and 80/60 mm thick at the edges finished smooth with a floating coat of chemical mixed cement mortar as per the manufacturer specification including cost and conveyance of all materials like sand, chemical water proofing compound, water etc., to site, including seigniorage charges and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth curing including rounding off junctions of wall and slab etc., complete for finished item of work. (with a guarantee of 10 years)

881 100 mm Average thick 1 Sqm 415.00882 80 mm Average thick 1 Sqm 347.00

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows duly manufactured using UPVC reinforced profiles of 60 mm x 62 mm x 2.5 mm for outer frames, 77 mm x 38 mm x 2.5 mm for sliding shutter frames the profiles shall be extruded online with properties of impact resistance, UV Stability, corrosion resistance, colour fastness, chemical resistance, low thermal expansion, fire retarding, aging resistant, sea water resistant, capable of mounting single/ double glazing system as per requirements, structurally reinforced with galvanized, hot dip galvanized up to 50 microns suitable passivated for corrosion resistance for tropical deployment of minimum thickness of 1 mm and shall not be exposed to any drainage routing, prefabricated & welded through fusion welding and assembled in factory, the window sash shall be fitted with 5 mm thick tinted/ float glass of reputed make duly fixed with ethylene propylene di-monomer (EPDM) weathering seal resistant to tear & decay and exposure to ozone, ultra violet radiation and tropical climates and accessories

like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant of approved make alround the outer frame from inside and outside to absorb and buffer expansion of wall, the construction of window system shall have a suitable water drainage facility and shall allow easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for

53

Building Items

S.No


FOR 2007-08

transportation, erection at site with templates for casement sizing complete for finished item of work (Guarantee for all manufacturing defects including accessories but excluding Glass panes)

883 A) SLIDING WINDOW - Single Glazed - Tinted Sash 1 Sqm 4988.00

884 B) SLIDING WINDOW - Single Glazed - Plain Sash 1 Sqm 4725.00

885 C) SLIDING WINDOW - Double Glazed - Tinted Sash 1 Sqm 6458.00

886 D) SLIDING WINDOW - Double Glazed - Plain Sash 1 Sqm 6300.00

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Casement windows duly manufactured using UPVC reinforced profiles of 60 mm x 56 mm x 2.5 mm for outer frames, 60 mm x 70 mm x 2.5 mm for casement shutter frames and the mullion sections are of 60 mm x 70 mm x 2.5 mm the profiles shall be extruded online with properties of impact resistance, UV Stability, corrosion resistance, colour fastness, chemical resistance, low thermal expansion, fire retarding, aging resistant, sea water resistant, capable of mounting single/ double glazing system as per requirements, structurally reinforced with galvanized, hot dip galvanized up to 50 microns suitable passivated for corrosion resistance for tropical deployment of minimum thickness of 1 mm and shall not be exposed to any drainage routing, prefabricated & welded through fusion welding through fusion welding and assembled in factory, the window sash shall be fitted with 5 mm thick tinted/ float glass of reputed make duly fixed with ethylene propylene di-monomer (EPDM) weathering seal resistant to tear & decay and exposure to ozone, ultra violet radiation and tropical climates and accessories like

friction stay hinges of stainless steel grade 304 provided with friction adjusting device and self wiping features 2 Nos., per sash, handle with mazak alloy casting 1 No. per sash, multipoint locking system suitably concealed 1 No., per sash provided with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber sealant of approved make alround the outer frame from inside and outside to absorb and buffer expansion of wall, the construction of window system shall have a suitable water drainage facility and shall allow easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (Guarantee for all manufacturing defects including accessories but excluding Glass panes)

887 A) CASEMENT WINDOW - Single Glazed - Tinted Sash 1 Sqm 4988.00

888 B) CASEMENT WINDOW - Single Glazed - Plain Sash 1 Sqm 4725.00

889 C) CASEMENT WINDOW - Double Glazed - Tinted Sash 1 Sqm 6563.00

890 D) CASEMENT WINDOW - Double Glazed - Plain Sash 1 Sqm 6300.00

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Curtain Walling systems duly manufactured using UPVC reinforced profiles of 60 mm x 56 mm x 2.5 mm for outer frames, 60 mm x 70 mm x 2.5 mm for casement shutter frames and the mullion sections are of 60 mm x 70 mm x 2.5 mm or 60 mm x 62 mm x 2.5 mm for sliding shutter outer frames and 77 mm x 38 mm x 2.5 mm for sliding shutter frames wherever

54

Building Items

S.No


FOR 2007-08

necessary the profiles shall be extruded online with properties of impact resistance, UV Stability, corrosion resistance, colour fastness, chemical resistance, low thermal expansion, fire retarding, aging resistant, sea water resistant, capable of mounting single/ double glazing system as per requirements, structurally reinforced with galvanized, hot dip galvanized up to 50 microns suitable passivated for corrosion resistance for tropical deployment of minimum thickness of 1 mm and shall not be exposed to any drainage routing, prefabricated & welded through fusion welding through fusion welding and assembled in factory,

the window sash shall be fitted with 5 mm thick tinted/ float glass of reputed make duly fixed with ethylene propylene di-monomer (EPDM) weathering seal resistant to tear & decay and exposure to ozone, ultra violet radiation and tropical climates and accessories for casement window - friction stay hinges of stainless steel grade 304 provided with friction adjusting device and self wiping features 2 Nos., per sash, handle with mazak alloy casting 1 No. per sash, multipoint locking system suitably concealed 1 No., per sash provided with raiser wedges for smooth operation for sliding window - clipping locking system 1 No. made of aluminium per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant of approved make alround the outer frame from inside and outside to absorb and buffer expansion of wall, the construction of window system shall have a suitable water drainage facility and shall allow easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for

casement sizing complete for finished item of work (Guarantee for all manufacturing defects including accessories but excluding Glass panes)

891 A)CURTAIN WALLING-Single Glazed-Tinted Sash 1 Sqm 4830.00

892 B)CURTAIN WALLING-Single Glazed - Plain Sash 1 Sqm 4620.00

893 C)CURTAIN WALLING-Double Glazed-Tinted Sash 1 Sqm 6825.00894 D) CURTAIN WALLING-Double Glazed-Plain Sash 1 Sqm 6300.00

Supply of Door frame made of hallow extruded (UPVC ) Plasticize poly Vinyl Chloride Profiles Suitable for Tropical deployment , the profiles are with multi chambered Constructions, the nominal thickness of outer wall is 2.5mm and the door frame sizes of 60 mm x 56 mm x 2.5mm / 43mm x 49mm x 2.4 mm duly reinforced with seasoned wood plank at the door hinges and the door frame top 2 courses shall be welded through fusion welding and assembled in factory inclusive of

895 A) 60mmx56mmx2.5mm 1 RM 289.00896 B) 43mmx49mmx2.4mm 1 RM 263.00

Sintex Door shutter, with shutter frame and infill panel made from PVC material confirming to IS: 10151-1982, The shutter frame made out of PVC Extruded sections having overall dimension of 47mm x 33mm with wall thickness of 1.2mm + 0.3mm with usual process variation corresponding to the Sintex code number DWUF 306. The shutter frame is given tapered shape to provide better grip to the infill panel end to

55

Building Items

S.No


FOR 2007-08

drain out the water The Infill panel is made out of PVC

Sections having Overall Dimensions of 200mmX 20mm with wall thickness of 1mm + 0.2mm with usual process variation corresponding to the Sintex code number SPUF 101. The shutter frames shall be mitre cut and joined at the corner. Polymeric “ L” type corners shall be provided at the corners to take up hardware & fixtures and shall be fixed with 10-20mm counter sunk fully threaded parallel shank steel screws. All the hardware locations shall be reinforced with special polymeric Bars as shown in the drawings. Stickers showing locations of different Hardware shall be pasted on the shutter. The infill panels shall be joined by tongue and groove method,

897 WOODEN AND BP GREY COLOUR. 1 Sqm 925.00 Door shutter made out of PVC material confirming to IS:

10151-1982. The Infill Panel is made out of seamless one piece multi chamber PVC extruded sections having overall dimensions of 610mm x 20mm with wall thickness of 1mm + 0.2mm with usual process variation corresponding to the Sintex code number SPUF 128. The top and bottom edges of

the shutter to be covered with end cap of the size 20mm x 11mm with usual process variation corresponding to Sintex Code Number DWUF 327. The door shutter to be reinforced with special polymeric reinforcements as shown in the drawing to take up necessary hardware’s and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places, .

898 WOODEN AND BP GREY COLOUR. 1 Sqm 1100.00 RATES OF WORKS A. DISMANTLING Dismantling clearing away and carefully stacking materials

useful for reuse.

897 Brick or stone masonry in clay up to 3 M height 1 Cum 65.00

898 Brick or stone masonry in clay over 3 M height 1 Cum 78.00

899 Brick or stone masonry in lime motor or brick masonry in cement mortar up to 3 M height

1 Cum 111.00

900 Brick in lime mortar wall up to 3 M height 1 Cum 65.00

901 Brick or stone masonry in lime motor or brick masonry in cement mortar over 3 M height

1 Cum 111.00

902 Brick in lime mortar wall up to 3 M height 1 Cum 65.00903 Stone masonry in cement mortar up to 3 M height 1 Cum 157.00

904 Stone masonry in cement mortar over 3 M height 1 Cum 189.00

905 Terracing work in roofs or floors 10 Sqm 78.00

906 Flat stones in roof or floors including lifting 10 Sqm 65.00

907 Pan tiled or Mangalore tiled roof without roof timbers. 10 Sqm 59.00

908 Flat and pan tiles or Mangalore tiles over flat tiles without roof timbers

10 Sqm 65.00

909 Old thatched roofing including tying materials into small bundles for reuse.

10 Sqm 20.00

910 Wrought and framed timber in roofs or floors 1 Cum 98.00

911 Doors and windows including removal of frame, hinges and fastening.

1 sqm 33.00

56

Building Items

S.No


FOR 2007-08

912 Old lime mortar plaster 10 Sqm 20.00913 Old cement mortar plaster 10 Sqm 23.00914 Dry rough stone revetment for aprons and stacking within 40 M

lead1 Cum 31.00

915 Revetment for aprons and stacking grouted within 40 lead 1 Cum 23.00916 Lime concrete 1 Cum 104.00917 Surki or cement concrete 1 Cum 163.00918 Kadapa slabs or Shahabad stone slabs flooring on sand bed 10 Sqm 33.00919 reinforced cement concrete 1 Cum 959.00

920 Through scraping of old plastered surface 10 Sqm 20.00

921 Washing of plastered surface with soap, soda and water (or with soda lime and water)

10 Sqm 7.00

922 clean removal of lime plaster from walls and raking out joints 20mm deep or from terraced roof and raking out joints 100 mm deep

10 Sqm 21.00

923 Clean removal of cement plaster from walls and raking out joint 200 mm deep

10 Sqm 22.00

Bailing out water for earth work excavation /concrete for foundation below water level.(For building items only)

a) other than sandy soil 924 0.0 M to 1.0 M 1 cum 87.00925 1.0 M to 2.0 M 1 cum 103.00926 2.0 M to 3.0 M 1 cum 120.00

b) Sandy soil 926 0.0 M to 1.0 M 1 cum 138.00927 1.0 M to 2.0 M 1 cum 214.00928 2.0 M to 3.0 M 1 cum 259.00

(E) CONCRETE Supply and placing of the Ready Mix Concrete as per IS-

4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard Mix Design as per IS-10262:1982 with coarse aggregate of nominal size 20 mm and fine aggregate of Zone-II as per the Mix Design approved by the Department from standard suppliers including cost and conveyance, vertical pumping up to 5 floors/ horizontal pumping up to 60.0 M for buildings/ pavements etc., works for basic cost excluding levelling, grading, spreading, curing, centring.

929 M - 10 (CEMENT CONTENT - 220 Kgs) 1 Cum 3045.00930 M - 15 (CEMENT CONTENT - 280 Kgs) 1 Cum 3281.00931 M - 20 (CEMENT CONTENT - 300 Kgs) 1 Cum 3360.00932 M - 25 (CEMENT CONTENT - 320 Kgs) 1 Cum 3439.00933 M - 30 (CEMENT CONTENT - 340 Kgs) 1 Cum 3518.00934 M - 35 (CEMENT CONTENT - 370 Kgs) 1 Cum 3638.00935 M - 40 (CEMENT CONTENT - 400 Kgs) 1 Cum 3754.00

Note: The cement contents noted are for OPC Grade Cements only, Fly-ash replacement can be made with prior approval. Variation in cement content for design mixes other than specified above has to be adjusted in the datas as per the corresponding approved rate of Cement per Kg.

57

Building Items

S.No


FOR 2007-08

936 Extra rate for pumping for each additional floor above 5 Floors / for each 12.0 M additional length over 60.0 M for horizontal pumping to be added in the datas

1 cum 34.00

937 Extra rate for pumping with Boom Pump for all floors 1 cum 125.00 (F) labour charges for wrought and put up including fixing

in position frames, shutters for doors, windows, ventilators etc.

938 Fully panelled doors external or internal 1 Sqm 430.00939 Glazed and panelled doors 1 Sqm 415.00940 Framed and planked doors 1 Sqm 406.00941 Ledged, braced and planked doors, 1 Sqm 348.00942 Windows glazed 1 Sqm 415.00943 Windows panelled 1 Sqm 546.00944 Windows ledged, braced and planked 1 Sqm 348.00945 Windows framed and planked 1 Sqm 331.00946 Ventilators glazed, fixed with double frame with wire netting. 1 Sqm 415.00947 Swing ventilators glazed 1 Sqm 447.00948 Weld mesh doors and windows 1 Sqm 348.00949 G.I or .AC sheet door & windows 1 Sqm 175.00

(G) MISCELLANEOUS ITEMS 950 Preparing gabions with jungle wood Each 3.00951 Planting plants Each 2.00952 Pruning plants Each 2.00953 Maintaining avenues including fencing, weeding, mulching,

watering etc per plant.Each 5.00

954 - do - When scattered in hot weather with extra conveyance from March to June

Each 6.00

955 Hoisting or lowering of slab 1 cum 84.00956 Dressing faces of granite stone (double line dressing) 1 Sqm 138.00957 Dressing faces of other than granite stone(double line

dressing) 1 Sqm 86.00

Expansion Joint fillers SUPPLY OF HIGH PERFORMANCE EXPANSION JOINT FILLER BOARD. CONFIRMING TO M.O.S.T (FOR ROADS&BUILDINGS) "SILFLEX" CAPCELL HD-100

958 A. 18MM THICK 1 Sqm 594.00959 B. 20MM THICK 1 Sqm 665.00960 C. 25MM THICK 1 Sqm 832.00

SUPPLY OF EXPANSION JOINT FILLER BOARD

FOR BUILDINGS, COLUMNS, BEAMS AND SLABS

"ARMOUR BOARD" SILFILL 961 A. 20MM THICK 1 Sqm 238.00962 B. 25MM THICK 1 Sqm 297.00963 C. 50MM THICK 1 Sqm 594.00

SUPPLY OF BACK UP TO COLD APPLIED SEALANT IN CONSTRUCTION AND

LONGITUDINAL JOINT "BACK UP ROAD" SILSEAL

964 A. 10MM OD 1 RM 9.00965 B. 12MM OD 1 RM 11.00

58

Building Items

S.No


FOR 2007-08

966 C. 15MM OD 1 RM 14.00967 D. 20MM OD 1 RM 19.00968 E. 25MM OD 1 RM 24.00

(H) SCAFFOLDING 969 For superstructure in first floor over the rate of foundation and

basement1 cum 36.00

970 For second floor over the rate of first floor superstructure 1 cum 44.00971 For third floor over the rate of IInd floor superstructure 1 cum 59.00

972 For each additional floor over third floor 1 cum 26.00 Scaffolding for plastering of walls and ceiling or painting

of roof timber or walls, where height is more than 3 M

973 1st and 2nd floor 10 Sqm 40.00974 2nd and 3rd floor 10 Sqm 80.00975 3rd and 4th floor 10 Sqm 120.00976 Extra for every additional floor over 4th floor 10 Sqm 29.00

Centring charges 977 Centring Charges for RCM/ Facia Railing 50 to 75 mm

thickness1 Sqm 55.00

Providing Centring, shuttering and scaffolding with props and steel plate as per the approved shuttering plan and other accessories as per the norms and stability calculations including cost and conveyance of all accessories etc complete for finished item of work

978 A. FOOTINGS, Templates, Bed Blocks 1 cum 376.00979 B. PEDESTALS 1 cum 614.00980 C. PLINTH BEAMS, LINTELS of any span 1 cum 602.00981 D. Using Cashewrina Ballies and Wooden runners & staging including all bracings, cross

members etc., complete for following items of work:

ITEM OF WORK Up to Height of the scaffolding to support structure (unsupported height of Structure from Ground Level)

Unit 3.66 M 4.27 M 4.88 M 5.49 M 7.32 M982 CHAJJAS of any thick 1 sqm 91.00 100.00 110.00 128.00 165.00983 COLUMNS 1 cum 959.00 1055.00 1151.00 1343.00 1727.00984 BEAMS (Rectangular,

L & T beams)1 cum 1006.00 1106.00 1207.00 1408.00 1810.00

985 SLABS up to 150 mm 1 sqm 112.00 124.00 135.00 158.00 203.00986 SLABS above 150 mm 1 sqm 139.00 152.00 166.00 194.00 250.00987 SLABS above 300 mm 1 cum 361.00 398.00 434.00 506.00 651.00988 GRID/ WAFFLE

SLABS1 sqm 177.00 195.00 212.00 248.00 319.00

989 HELICAL STAIRCASE 1 sqm 211.00 232.00 990 ARCHES up to 1.5 M

(Beams & Lintels)1 cum 1715.00 1886.00 2058.00 2401.00 3087.00

991 Above 1.5 m Span (Beams & Lintels)

1 cum 1740.00 1914.00 2088.00 2436.00 3132.00

992 DOMES of any Span 1 cum 1849.00 2034.00 2219.00 2589.00 3328.00 E. Using Adjustable Jack screw Props and Acro span beams including all pipe bracings,

clamps, couplings, pre-fabricated steel "H" frames, cross members etc., complete for following items of work:

ITEM OF WORK Up to Height of the scaffolding to support structure (Unsupported height of Structure from Ground Level)

Unit 3.66 M 4.27 M 4.88 M 5.49 M 7.32 M993 CHAJJAS of any thick 1 sqm 146.00 165.00 183.00 220.00 256.00994 COLUMNS 1 cum 959.00 1055.00 1151.00 1343.00 1727.00

59

Building Items

S.No


FOR 2007-08

995 BEAMS (Rectangular, L & T beams)

1 cum 1609.00 1810.00 2012.00 2414.00 2817.00

996 SLABS up to 150 mm 1 sqm 180.00 203.00 225.00 271.00 316.00997 SLABS above 150 mm 1 sqm 222.00 250.00 278.00 333.00 389.00998 SLABS above 300 mm 1 cum 578.00 651.00 723.00 868.00 1013.00999 GRID/ WAFFLE

SLABS1 sqm 283.00 319.00 354.00 425.00 496.00

1000

HELICAL STAIRCASE 1 sqm 337.00 380.00

1001

ARCHES up to 1.5 M (Beams & Lintels)

1 cum 2744.00 3087.00 3430.00 4116.00 4803.00

1002

Above 1.5 m Span (Beams & Lintels)

1 cum 2784.00 3132.00 3480.00 4177.00 4873.00

1003

DOMES of any Span 1 cum 2958.00 3328.00 3698.00 4438.00 5178.00

Note: Centring charges and relevant Specifications to be clearly mentioned in the RCC Specifications, datas and contract agreements

1004

Labour charges for making 50 to 75 mm thick RCM Paradah walls (RCM Drop walls) including tying Rabbit (chicken) wire mesh to the existing mild steel/ HYSD Steel reinforcement applying mortar lumps, finishing, plastering both faces, sponge finishing etc complete Labour charges only excluding cost of materials & steel reinforcement

1 Sqm 133.00

1005

Labour charges for fixing A.C sheets including cost of J. Bolts bitumen washers etc. with or without ridges.

10 sqm 410.00

1006

Labour charges for fabricating, erecting, fixing aluminium partitions, doors, windows, work-station frames including cutting, fabricating, assembling, fixing in position with necessary screws excluding cost of materials

1 Sqm 345.00

1007

Labour charges for making, fabricating office furniture, racks, work-station furniture with ply-wood sheets, decolam/ veneer laminations including fixing cutting, making, assembling, fixing hinges, fixing fixtures, fixing locks, pasting sheets/ laminations fixing in position with necessary screws excluding cost of materials, accessories, fittings

1 Sqm 288.00

1008

Labour charges for making, fabricating kitchen furniture, cup-boards with shutters, box racks, with ply-wood sheets, decolam/ veneer laminations including fixing cutting, making, assembling, fixing hinges, fixing fixtures, fixing locks, pasting sheets/ laminations fixing in position with necessary screws excluding cost of materials, accessories, fittings

1 Sqm 461.00

1009

mixing concrete as per design mix in Mechanical Weigh Batching units up to 15 cum/hr capacity

1 Cum 42.00

1010

mixing concrete as per design mix in Electronic Weigh Batching units up to 15 cum/hr capacity

1 Cum 54.00

(j) LIFT CHARGES For RCC items

1011

Between 1st and 2 nd floor 1 cum 46.00

1012

Between 2nd and 3rd floor 1 cum 114.00

1013

Between 3rd and 4th floor 1 cum 212.00

1014

Between 4th and 5th floor 1 cum 333.00

60

Building Items

S.No


FOR 2007-08

1015


1016

between 6ht and 7th floor 1 cum 454.00

1017


1018


1019


LIFT CHARGES FOR BRICK MASONRY & STONE MASONRY

1020

Between 1st and 2nd floor 1 cum 38.00

1021

Between 2nd and 3rd floor 1 cum 54.00

1022

Between 3rd and 4th floor 1 cum 69.00

1023

Add extra for every additional floor above 4th floor 1 cum 22.00

Lift charges for impervious coat up to 26 mm thick plastering with impermo compound or Shahabad stone flooring:

1024

Between 1st and 2nd floor 10 Sqm 19.00

1025

Between 2nd and 3rd floor 10 Sqm 34.00

1026

Between 3rd and 4th floor 10 Sqm 50.00

1027

Add extra for every additional floor above 4th floor 10 Sqm 17.00

Lift charges for plastering 102

8Between 1st and 2nd floor 10 Sqm 9.00

1029

Between 2nd and 3rd floor 10 Sqm 16.00

1030

Between 3rd and 4th floor 10 Sqm 24.00

1031

Add extra for every additional floor above 4th floor 10 Sqm 11.00

Providing, Designing, cutting, bending and fixing aluminium composite cladding of approved make (Alucopanel, alucobonel, Reynobond, Lennox Durabuid) on external facade of size as shown with water tight system either curved or straight on concrete/ masonry surfaces skin material 0.25 mm thick aluminium sheet (300 5 H6) cover material natural polyethylene aluminium cladding panel to be of approved colour / shade fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable chemical/ anchor bolts on structural steel work including necessary accessories complete in all respects, where level difference is shown dummy structural steel backup frame shall be provided including the finished surface shall be protected with 80 microns self adhesive peel off film with two layers of white and black tested to withstand at least 6 months exposure to local

61

Building Items

S.No


FOR 2007-08

weather condition, without loosing the original peel off characteristic or causing stains or other damages with silicon sealant of Dow Corning 789 or Wacker EL 305 or GE etc., including all scaffolding and labour charges etc., complete for finished item of work

1032

ACP Cladding - 3 mm thk 1 Sqm 1880.00

1033

ACP Cladding - 4 mm thk 1 Sqm 2310.00

Note: SSR rates for Building items are purely for guidance for the officers for preparation of estimates vide para.113 of APPWD code. Authority who prepares the estimate is however responsible for proper rates as envisaged in para.45 of APPWD code.

Rates: Supply Rates for all the materials are based on market rates plus Sales Tax/ VAT. Composite tax on finished items may be allowed as applicable.

62

SANITARYAND

WATER SUPPLY ITEMS(BUILDINGS)

63

SANITARY & WATER SUPPLY ITEMS

S. No

Description of item Unit SS Rates

for2007-08

1 2 3 4 S.W.G. PIPES & FITTINGS 1 Supplying, laying, jointing and testing 101.6 mm SWG pipes of

ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1.5:1 prop. Including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 1524 mm(5'0") depth and refilling with watering and tamping.

1 RM 183.00

2 Supplying, laying, jointing and testing 101.6 mm SWG pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1:5:1 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) upto 914.4 mm (3'0") depth and refilling with watering and tamping.

1 RM 149.00

3 Supplying, laying, jointing and testing 152.4 mm SWG pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1.5:1 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 1524 mm(5'0") depth and refilling with watering and tamping.

1 RM 254.00

4 labour charges only for laying, jointing and testing SWG pipes of any dia with airtight cement joints including excavation of trenches and socket pits in any soil up to 1524 mm (5'-0") depth (except rock requiring blasting) and refilling with watering and tamping.

1 RM 44.00

5 a)Supplying , laying, jointing and testing 152.4 mm CC bed 1 : 2 : 4 Prop: using 19.05 mm gauge graded granite metal chips and cradling 101.6 mm SWG pipe line all round to have 76.2 mm thick cover over the sockets.

1 RM 56.00

6 b) - do - labour charges only 1 RM 6.007 a)Supplying , laying, jointing and testing 152.4 mm CC bed

1:2:4 Prop: using 19.05 mm gauge graded granite metal chips and cradling 152.4 mm SWG pipe line all round to have 76.2 mm thick cover over the sockets.

1 RM 97.00

8 b) - do - labour charges only 1 RM 32.009 a) Supplying & Laying 101.6 mm SWG channels with cement

mortar joints with suitable brick masonry for fixing the channels in position

1 RM 58.00

10 b) - do - labour charges only 1 RM 22.0011 a) Supplying & Laying 152.4 mm SWG channels with cement

mortar joints with suitable brick masonry for fixing the channels in position

1 RM 109.00

12 b) - do - labour charges only 1 RM 31.00 Supply of SWG pipe of ISI make conforming to ISI 651

13 4" dia (101.6mm) 1 RM 85.00

14 6" dia (152.4mm) 1 RM 147.00

15 8" dia (203.2mm) 1 RM 227.00

16 10" dia (254 mm) 1 RM 417.00

17 12" dia (300 mm) 1 RM 600.00

18 14" dia (350 mm) 1 RM 816.67 Supply of SWG Bends of ISI make conforming to IS standards

19 100 mm dia Each 46.0020 150 mm dia Each 122.0021 200 mm dia Each 161.0022 250 mm dia Each 325.00

64

Sanitary & Water Supply (Buildings)

23 300 mm dia Each 413.0024 350 mm dia Each 516.00 Supply of SWG Junctions (T's & Y's) dia in mm of ISI make

conforming to IS standards

Length of barrel 60 cm 25 100 x 100 Each 85.0026 150 x 100 Each 127.0027 150 x 150 Each 138.0028 200 x 100 Each 196.0029 200 x 150 Each 230.0030 200 x 200 Each 264.0031 250 x 100 Each 310.0032 250 x 150 Each 409.0033 250 x 200 Each 507.0034 250 x 250 Each 606.0035 300 x 100 Each 442.0036 300 x 150 Each 566.0037 300 x 200 Each 691.0038 300 x 250 Each 815.0039 300 x 300 Each 939.0040 350 x 100 Each 552.0041 350 x 150 Each 708.0042 350 x 200 Each 863.0043 350 x 250 Each 1018.0044 350 x 300 Each 1174.0045 350 x 350 Each 1174.00 Supply of SWG Plugs dia in mm of ISI make conforming to IS

standards

46 100 Each 17.0047 150 Each 33.0048 200 Each 62.0049 250 Each 107.0050 300 Each 170.0051 350 Each 213.0052 Supplying & fixing 150 mm x 100 mm SWG gully traps of ISI

make conforming to ISI 651 & 4127 with C.I Grating & Constg. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover

Each 321.00

Supply of SWG Gully Traps (Round & Square) of ISI make conforming to IS standards

53 150 x 100 mm Each 131.0054 Labour charges for fixing and laying the SWG Junctions/ Plugs/

Bends of any dia with airtight cement joints as per standrad practice

Each 14.00

MAN HOLES & INSPECTION CHAMBERS - AS PER - IS 4111 : Part 1 : 1986

55 Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4

Each 3600.00

65


benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

56 Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Each 5513.00

57 Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Each 3029.00

58 Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Each 4411.00

59 Constructing 914.4 mm x 457.2 mm (3'0"x1'6") brick in CM 1:6 prop. Masonry Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 914.4 mm x 457.2 mm (3'0"x1'6") C.I frame and cover of 40 Kg.

Each 3226.00

66


60 Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg.

Each 1945.00

61 a)Making drainage connection in the existing inspection including all repairs

Each 80.00

62 b) - do - labour charges only Each 44.00 C.I. PIPES & FITTINGS - AS PER - IS 1729:1979 Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI

marked conforming to IS:1729-1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½:1) and including fixing of M.S. clamps if necessary with required no.of Bombay nails etc., complete

63 3" dia (76.2 mm) Single Socket 1 RM 325.0064 4" dia (101.6mm) Single Socket 1 RM 450.0065 6" dia (152.4mm) Single Socket 1 RM 810.0066 3" dia (76.2 mm) Double Socket 1 RM 375.0067 4" dia (101.6mm) Double Socket 1 RM 500.0068 6" dia (152.4mm) Double Socket 1 RM 860.0069 Labour charges only for fixing of C.I. Single/ Double Socket soil

pipes of any dia with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar and including fixing of M.S. clamps if necessary with required nails

1 RM 86.00

Supplying & fixing CI Plain bends Ist quality ISI marked conforming to IS:1729-1979 with cement caulked joints and fixing as per site requirements with standard practice

70 3" dia (76.2 mm) Each 130.0071 4" dia (101.6 mm) Each 178.0072 6" dia (152.4 mm) Each 367.00 Supplying & fixing CI Plug (Door) bends Ist quality ISI marked

conforming to IS:1729-1979 with cement caulked joints and fixing as per site requirements with standard practice

73 3" dia (76.2 mm) Each 175.0074 4" dia (101.6 mm) Each 218.0075 6" dia (152.4 mm) Each 485.0076 Labour charges only for fixing CI Plain/ Plug (Door) bends with

cement caulked joints and fixing as per site requirements with standard practice

Each 38.00

Supplying & fixing CI soil single junctions Ist quality ISI marked conforming to IS:1729-1979 with cement caulked joints and fixing as per site requirements with standard practice

77 76.2 mm (3") CI soil single junction with plug Each 235.0078 101.6 mm (4") CI soil single junction with plug Each 340.0079 152.4 mm (6") CI soil single junction with plug Each 840.0080 76.2 mm (3") CI soil plain single junction Each 203.0081 101.6 mm (4") CI soil plain single junction Each 295.0082 152.4 mm (6") CI soil plain single junction Each 750.0083 Labour charges only fixing CI soil single junctions with cement

caulked joints and fixing as per site requirements with standard practice

Each 50.00

Supplying & fixing CI soil Double junctions Ist quality ISI marked conforming to IS:1729-1979 with cement caulked joints and fixing as per site requirements with standard practice

84 76.2 mm (3") CI soil Double junction with plug Each 385.00

67


85 101.6 mm (4") CI soil Double junction with plug Each 420.0086 152.4 mm (6") CI soil Double junction with plug Each 1110.0087 76.2 mm (3") CI soil plain Double junction Each 335.0088 101.6 mm (4") CI soil plain Double junction Each 390.0089 152.4 mm (6") CI soil plain Double junction Each 1040.0090 Labour charges only fixing CI soil Double junctions with cement

caulked joints and fixing as per site requirements with standard practice

Each 46.00

Supplying & fixing CI soil Offsets Ist quality ISI marked conforming to IS:1729-1979 with cement caulked joints and fixing as per site requirements with standard practice

75 mm Offset 91 for 76.20 mm (3") C.I. Pipe Each 166.0092 for 101.6 mm (4") C.I. Pipe Each 217.0093 for 152.4 mm (6") C.I. Pipe Each 534.00 115 mm Offset Each

94 for 76.20 mm (3") C.I. Pipe Each 197.0095 for 101.6 mm (4") C.I. Pipe Each 246.0096 for 152.4 mm (6") C.I. Pipe Each 547.00 150 mm Offset Each

97 for 76.20 mm (3") C.I. Pipe Each 228.0098 for 101.6 mm (4") C.I. Pipe Each 276.00

99 for 152.4 mm (6") C.I. Pipe Each 559.00

100 Labour charges only fixing CI soil Offsets with cement caulked joints and fixing as per site requirements with standard practice

Each 23.00

Supplying & fixing CI floor traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice

101 100 mm dia Inlet- 75 mm (3") outlet pipe Each 247.00102 100 mm dia Inlet - 100 mm (4") outlet pipe Each 303.00

Supplying & fixing CI Nahani traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice

Each

103 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs Each 200.00104 Labour charges only for fixing CI Nahani/ Floor traps with C.P.

Grating fixing with white cement as per site requirements with standard practice

Each 30.00

105 Boxing of Nahany traps in RCC floors Each 106.00106 Boxing of W.C Trap in R.C.C floors Each 213.00

Supplying & fixing CI Collars (double socket) Ist quality ISI marked conforming to IS:1729-1979 with cement caulked joints and fixing as per site requirements with standard practice

107 for 76.20 mm (3") C.I. Pipe Each 100.00108 for 101.6 mm (4") C.I. Pipe Each 125.00109 for 152.4 mm (6") C.I. Pipe Each 360.00

VITREOUS CHINAWARE - SANITARY APPLIANCES as per IS:2556 - 1974

Supplying & Fixing Indian pattern white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI Mark

110 580 mm Long Each 582.00111 630 mm Long Each 582.00112 Labour charges only for fixing Indian pattern W.C with "P" or

"S" trap Each 140.00

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI Mark

Each 977.00

113 580 mm x 440 mm Each 582.00

68


114 630 mm x 450 mm Each 582.00115 Labour charges only Fixing Orissa pan W.C with "P" or "S" trap Each 175.00116 Supplying & Fixing porcelain foot rest for squatting I.W.C.

(Rectangular pair) of sizes 250 mm x 125 mm x 15 mm thick each foot rest 1st quality ISI marked conforming to IS:2556-Part-10:1974

Pair 153.00

117 Labour charges only for fixing porcelain foot rest for squatting I.W.C. (Rectangular pair)

Pair 32.00

118 Providing Brick masonry seat for Orissa pan/ Indian W.C. using 2nd class bricks as per standard practice

Each 165.00

119 Providing Cement Concrete Squatting plate for Orissa pan/ Indian W.C. in P.C.C. 1:2:4 as per standard practice

Each 50.00

120 Supplying & Fixing low down porcelain flushing tank 10 Lit Capacity Hindustan Sanitary ware/ parry/ Neycer with internal components

Each 1392.00

121 Labour charges only for fixing low down porcelain flushing tank with internal components

Each 254.00

122 Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'P' trap

Each 916.00

123 Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap

Each 976.00

124 Labour charges only for fixing European Water Closet with 'P' or 'S' trap as per standard practice

Each 127.00

125 Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996

Each 308.00

126 Labour charges only for fixing plastic seat and lid for European water closet

Each 38.00

Supply, Installation and commissioning approved make floor mounted EWC (suit) CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects

127 a) white Each 5710.00128 b) Extra for colour - Grade - I/ Grade - II Each 2283.00129 c) Extra for spl. Colour - Grade - III Each 4567.00

Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 300 grams Seiko/ Esso or equivalent complete with standard CI brackets including wooden block

130 660 x 460 mm - Single C.P. Pillar cock Each 1344.00131 630 x 450 mm - Single C.P. Pillar cock Each 1173.00132 630 x 450 mm - Double C.P. Pillar cock Each 1308.00133 550 x 400 mm - Single C.P. Pillar cock Each 808.00134 550 x 400 mm - Double C.P. Pillar cock Each 942.00135 450 x 300 mm - Single C.P. Pillar cock Each 689.00136 450 x 300 mm - Double C.P. Pillar cock Each 824.00137 Labour charges only for fixing Indian make Flat Back Wash

Hand Basin with waste fittings like rubber plug, chain, 32 mm Each 178.00

69


nominal size C.P. Fitting Pillar Taps complete with standard CI brackets including wooden block

138 Supplying and Fixing Pedestal for Wash Hand Basin (H.S.W / Parry / Earthenware)

Each 717.00

139 Labour charges only for fixing pedestal for wash hand basin Each 64.00140 Supplying & Fixing 31.75 mm C.P bottle trap (Heavy type)

Parryware or equivalentEach 281.00

141 Labour charges only for fixing bottle trap to the wash hand basin Each 25.00142 Supplying & Fixing white glazed flat back Bowl urinals of size

440 mm x 265 mm x 315 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995

Each 515.00

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make (HSW/Parry/Neycer)

143 410 x 265 x 305 mm Each 1550.00144 590 x 375 x 390 mm Each 1752.00145 Labour charges only Fixing flat back Bowl/ Half stall urinals with

fixing C.P. Spreader and screws complete Each 70.00

Supplying & Fixing Indian make white glazed vitreous china porcelain sink conforming to IS:2556-Part-5-1994 on cantilever brackets with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979

146 600 x 400 x 250 Each 2500.00147 750 x 450 x 250 Each 2900.00148 Labour charges only for fixing Vitreous china porcelain sinks

with waste fittings, rubber plug, chain, cantilever brackets etc.Each 191.00

149 a) S & F 609.6 x 457.2 x 254 mm RCC terrazzo finished sink (or constructed at site with 50.8mm thick) brass plug and chain including CI cantilever brackets

Each 450.00

150 b) - do - labour charges only Each 127.00 TAPS & FAUCETS

151 a) S & F 12.7 mm NP stop cock Indian make 300 grams Seiko or equivalent

Each 162.00

152 b) - do - labour charges only Each 15.00153 a) S & F concealed stop cock 12.7 mm (1/2") Indian Make

Seiko or equivalentEach 223.00

154 b) - do - labour charges only Each 18.00155 a) S & F angle stop cock 12.7 mm dia first quality Indian Make

Seiko or equivalentEach 162.00

156 b) - do - labour charges only Each 18.00157 a) S&F 12.7 mm N.P bib tap Indian make 300 grams Seiko or

equivalentEach 162.00

158 b) - do - labour charges only Each 15.00159 a) S&F 12.7mm N.P bib tap Indian make 250 grams Seiko or


160 b) - do - labour charges only Each 13.00161 a)S & F 31.75 mm brass plumber Union best Indian first quality Each 33.00162 b) - do - labour charges only Each 6.00163 a) S & F 12.7 mm brass stop cock Indian make 400 grams Each 120.00164 b) - do - labour charges only Each 13.00165 a) S & F 12.7 mm brass stop cock Indian make 300 grams Each 115.00166 b) - do - labour charges only Each 13.00

70


167 a) S & F 12.7 mm brass bib cock Indian make 400 grams Each 130.00168 b) - do - labour charges only Each 13.00169 a) S & F 12.7 mm brass bib cock Indian make 300 grams Each 120.00170 b) - do - labour charges only Each 14.00171 S & F CP long body bib cock fancy type deluxe 300 grams dia

12.7 mm Indian make Seiko or equivalentEach 245.00

172 S & F 12.7mm dia high neck pillar cock 1st quality Indian make 400 grams

Each 362.00

173 a) S & F 12.7 mm NP elbow action bib cock 600 grams Each 353.00174 b) - do - labour charges only Each 22.00175 a) S&F 12.7 m NP elbow action pillar cock 600 grams Each 353.00176 b) - do - labour charges only Each 19.00177 S&F 12.7 mm dia NP pillar cock Ist quality Indian make Seiko

or equivalentEach 185.00

178 S&F 12.7 mm dia NP push cock Ist quality Each 163.00179 S&F 12.7 mm dia NP lift cock Ist quality Each 130.00180 a)S & F 38.1 mm C.P waste coupling Half or Full Thread 1st

Quality Indian make Parryware or equivalentEach 136.00

181 b) - do - labour charges only Each 15.00182 a) S & F 31.75 mm PVC bottle trap Each 95.00183 b) - do - labour charges only Each 13.00184 a) S& F 38.1 mm brass plumber union Each 44.00185 b) - do - labour charges only Each 6.00186 a)S & F 19.05 mm NP stop cock Indian make with ISI mark 400

gramsEach 204.00

187 b) - do - labour charges only Each 13.00 G.I. PIPES & FITTINGS

188 S& F GI union 12.7 mm Ist Quality Each 26.00189 S& F GI union 19.05 mm Ist Quality Each 32.00190 S& F GI union 25.4 mm Ist Quality Each 48.00191 S& F GI union 31.75 mm Ist Quality Each 60.00192 S& F GI union 38.1 mm Ist Quality Each 72.00193 S& F GI union 50.8 mm Ist Quality Each 88.00194 S& F GI connector 25.4 mm dia Each 53.00195 S& F 12.7 m GI 'T' A class Ist quality Each 33.00196 S& F 31.75 mm dia GI bend Ist quality Each 48.00197 S & F 31.75 mm dia GI 'T' 1st Quality Each 47.00198 a) S & F 25.4 mm copper ball cock ith PVC ball Indian make ISI

markEach 275.00

199 b) - do - labour charges only Each 25.00200 a) S & F 19.05 mm copper ball cock ith PVC ball Indian make

ISI markEach 225.00

201 b) - do - labour charges only Each 25.00202 a)S & F 12.7 mm copper ball cock ith PVC ball Indian make ISI

markEach 145.00

203 b) - do - labour charges only Each 25.00204 a) S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class

- I, Indian make heavy type - 25 mm NB Size Each 482.00





71












219 b) - do - labour charges only Each 76.00220 a) Supplying & fixing Gunmetal (GM) Horizontal Check (Non

return) Valve as per IS-778 I-class heavy duty - 15 mm NB SizeEach 212.00









229 b) - do - labour charges only Each 30.00230 a) Supplying & fixing Gunmetal (GM) Vertical Check (Non












241 b) - do - labour charges only Each 30.00242 a) S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle

as per IS - Class - I, Indian make heavy type - 15 mm NB Size Each 251.00



245 b) - do - labour charges only Each 30.00246 a) S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle Each 481.00

72


as per IS - Class - I, Indian make heavy type - 25 mm NB Size 247 b) - do - labour charges only Each 30.00248 a) S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle






253 b) - do - labour charges only Each 30.00254 a) S& F 15 mm Nominal Bore GI pipe Light Grade properties &

weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

1 RM 118.00

255 b) - do - labour charges only 1 RM 23.00256 a) S& F 20 mm Nominal Bore GI pipe Light Grade properties &


1 RM 136.00



1 RM 178.00



1 RM 226.00



1 RM 234.00



1 RM 283.00

265 b) - do - labour charges only 1 RM 38.00266 a) S& F 15 mm Nominal Bore GI pipe Medium Grade properties

& weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

1 RM 131.00



1 RM 146.00



1 RM 191.00



1 RM 241.00



1 RM 309.00


& weight as per IS 1239 ISI mark with GI fittings including the 1 RM 219.00

73


cost of pipe & its fittings & labour charges complete277 S & F 65 mm Nominal Bore GI pipe Medium Grade properties &

weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors with checkout and socket Tata or Zenith make or equivalent.

1 RM 460.00

278 a)S & F 12.7 mm holder bat clamps Each 8.00279 b) - do - labour charges only Each 4.00280 a)S & F 19.05 mm holder bat clamps Each 13.00281 b) - do - labour charges only Each 4.00282 a)S & F 25.4 mm holder bat clamps Each 15.00283 b) - do - labour charges only Each 4.00284 a)S & F 38.1 mm holder bat clamps Each 19.00285 b) - do - labour charges only Each 5.00286 a) S & F 12.7 x 152.0 mm NP shower rose heavy Each 120.00287 b) - do - labour charges only Each 11.00288 a) S & F 12.7 x 137.0 mm NP shower rose heavy Each 115.00289 b) - do - labour charges only Each 13.00290 a) S & F 12.7 x 101.6 mm NP shower rose heavy Each 110.00291 b) - do - labour charges only Each 13.00292 a) S & F 12.7 x 88.9 CP fancy shower Each 195.00293 b) - do - labour charges only Each 13.00294 a) Supplying & fixing 12.7 mm GI drain pipe with plug for tanks

(Mud valve) including making a holeEach 27.00

295 b) - do - labour charges only Each 13.00296 a) Supplying & fixing 19.05 mm GI drain pipe with plug for tanks


297 b) - do - labour charges only Each 13.00298 a) Supplying & fixing 25.4 mm GI drain pipe with plug for tanks


299 b) - do - labour charges only Each 15.00300 a) Taking branch water connection from the existing 25.4 mm GI

pipe including cutting threading, etc, complete with fittingEach 93.00

301 b) - do - labour charges only Each 25.00302 a) Taking branch water connection from the existing 19.05 mm

GI pipe including cutting threading, etc, complete with fitting,Each 53.00

303 b) - do - labour charges only Each 23.00304 a) Taking branch water connection from the existing 12.7 mm GI

pipe including cutting threading, etc, complete with fitting,Each 40.00

305 b) - do - labour charges only Each 19.00306 Supplying & fixing leather washers for 12.7 mm bib tap and

stop cockEach 1.00

307 Supplying & fixing leather washers for 19.05 mm bib tap and stop cock

Each 3.00

308 Supplying & Fixing 12.7 mm fibre washers Each 3.00309 Supplying & Fixing 19.05 mm fibre washers Each 3.00

PVC PIPES & FITTINGS 310 a) Providing & Placing on Terrace (at all floor levels)

polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

1 Lit 6.00

311 b) - do - labour charges only 1 Lit 0.00312 Supply of Plastic storage tank lid with hinges Each 60.00

74


313 Supply & Fixing 76.2 mm dia PVC elbow Ist quality Each 35.00314 Supply & fixing 31.75 mm dia PVC flexible waste pipe of 914.4

mm length of Ist qualityEach 20.00

315 Supply & Fixing 38.1 mm dia PVC solid waste pipe outlet Each 67.00316 Supply & fixing Fancy PVC shelf including all fittings Each 160.00317 Supply & fixing of PVC low level system parry ware, slim line

with internal components & short bend.

318 a) 10 Litres capacity Single Flush Each 820.00319 b) 10 litres capacity Dual Flush Each 1020.00320 c) 8 Litres capacity single Flush Each 550.00

PRINCE/SUDHAKAR PVC/SWR PIPES & FITTINGS (OR EQUIVALENT)

Prince/ Sudhakar make or equivalent quality PVC /SWR pipes & fittings ( as per ISI standards) 4kg/cm2

321 75 mm dia 3 M Single Socket pipe Each 192.00322 90 mm dia 3 M single socket pipe Each 305.00323 110 mm dia 3 M Single socket pipe Each 365.00324 75 mm dia 3 M Double socket pipe Each 217.00325 90 mm dia 3 M Double socket pipe Each 346.00326 110 mm dia 3 M Double socket pipe Each 423.00327 75 mm dia 1828.8 mm (6'-0") Single Socket pipe Each 135.00328 90 mm dia 1828.8 mm (6'-0") Single Socket pipe Each 209.00329 110 mm dia 1828.8 mm (6'-0") Single Socket pipe Each 259.00330 75 mm dia 1828.8 mm (6'-0") Double Socket pipe Each 144.00331 90 mm dia 1828.8 mm (6'-0") Double Socket pipe Each 221.00332 110 mm dia 1828.8 mm (6'-0") Double Socket pipe Each 269.00333 75 mm dia 1219. mm (4'-0") Double Socket pipe Each 99.00334 90 mm dia 1219. mm (4'-0") Double Socket pipe Each 152.00335 110 mm dia 1219. mm (4'-0") Double Socket pipe Each 183.00336 75 mm dia 914.4mm (3'-0") Double Socket pipe Each 84.00337 90 mm dia 914.4mm (3'-0") Double Socket pipe Each 123.00338 110 mm dia 914.4mm (3'-0") Double Socket pipe Each 158.00339 75 mm dia 609.6mm (2'-0") Double Socket pipe Each 50.00340 90 mm dia 609.6mm (2'-0") Double Socket pipe Each 85.00341 110 mm dia 609.6mm (2'-0") Double Socket pipe Each 105.00342 160 MM dia 3 M Double socket pipe Each 868.00

Prince/ Sudhakar make or equivalent quality PVC /SWR pipes & fittings ( as per ISI standards) 6kg/cm2

343 75 mm dia 3 M Single Socket pipe Each 326.00344 90 mm dia 3 M single socket pipe Each 524.00345 110 mm dia 3 M Single socket pipe Each 624.00346 75 mm dia 3 M Double socket pipe Each 356.00347 90 mm dia 3 M Double socket pipe Each 565.00348 110 mm dia 3 M Double socket pipe Each 689.00349 75 mm dia 1828.8 mm (6'-0") Single Socket pipe Each 213.00350 90 mm dia 1828.8 mm (6'-0") Single Socket pipe Each 332.00351 110 mm dia 1828.8 mm (6'-0") Single Socket pipe Each 395.00352 75 mm dia 1828.8 mm (6'-0") Double Socket pipe Each 228.00353 90 mm dia 1828.8 mm (6'-0") Double Socket pipe Each 346.00354 110 mm dia 1828.8 mm (6'-0") Double Socket pipe Each 427.00355 75 mm dia 1219. mm (4'-0") Double Socket pipe Each 154.00356 90 mm dia 1219. mm (4'-0") Double Socket pipe Each 239.00

75


357 110 mm dia 1219. mm (4'-0") Double Socket pipe Each 291.00358 75 mm dia 914.4mm (3'-0") Double Socket pipe Each 133.00359 90 mm dia 914.4mm (3'-0") Double Socket pipe Each 195.00360 110 mm dia 914.4mm (3'-0") Double Socket pipe Each 236.00361 75 mm dia 609.6mm (2'-0") Double Socket pipe Each 86.00362 90 mm dia 609.6mm (2'-0") Double Socket pipe Each 134.00363 110 mm dia 609.6mm (2'-0") Double Socket pipe Each 170.00364 160 mm dia 3 M Double socket pipe Each 1419.00

Prince/ Sudhakar make or equivalent quality U.V resistant UPVC) SWR pipe fittings (as per ISI standards )

Plain Bend 87.5 Degrees. 365 75 mm dia Each 37.00366 90 mm dia Each 53.00367 110 mm dia Each 62.00

Door Bend 87.5 Degrees. 368 75 mm dia Each 50.00369 90 mm dia Each 71.00370 110 mm dia Each 80.00

45 Degree Bend 371 75 mm dia Each 29.00372 90 mm dia Each 41.00373 110 mm dia Each 53.00

Cleaning Pipe 374 75 mm dia Each 50.00375 90 mm dia Each 73.00376 110 mm dia Each 89.00

Single Tee 377 75 mm dia Each 45.00378 90 mm dia Each 67.00379 110 mm dia Each 81.00

Single Tee (With Door) 380 75 mm dia Each 54.00381 90 mm dia Each 81.00382 110 mm dia Each 98.00

Double Tee 383 75 mm dia Each 94.00384 90 mm dia Each 137.00385 110 mm dia Each 195.00

Double Tee (With Door) 386 75 mm dia Each 150.00387 90 mm dia Each 215.00388 110 mm dia Each 222.00

Single ' Y' 389 75 mm dia Each 55.00390 90 mm dia Each 89.00391 110 mm dia Each 103.00

Single ' Y' (With Door) 392 75 mm dia Each 71.00393 90 mm dia Each 111.00394 110 mm dia Each 129.00

Double ' Y'

76


395 75 mm dia Each 77.00396 90 mm dia Each 119.00397 110 mm dia Each 135.00

Double ' Y' (With Door ) 398 75 mm dia Each 99.00399 90 mm dia Each 155.00400 110 mm dia Each 174.00

Coupler 401 75 mm dia Each 27.00402 90 mm dia Each 38.00403 110 mm dia Each 43.00

Reducer 404 90 x 75 mm dia Each 45.00405 110 x 75 mm dia Each 43.00406 90 x 110 mm dia Each 60.00

Vent Cowl 407 63 mm dia Each 7.00408 75 mm dia Each 10.00409 90 mm dia Each 12.00410 110 mm dia Each 14.00

Pipe Clip 411 40 mm dia Each 9.00412 50 mm dia Each 10.00413 63 mm dia Each 10.00414 75 mm dia Each 11.00415 90 mm dia Each 12.00416 110 mm Each 13.00417 160 mm dia Each 27.00

P Trap 418 P' Trap ( Small without Air vent ) 110 mm Each 142.00419 P' Trap ( Small with Air vent ) 110 mm Each 156.00420 P' Trap (Big with Air vent ) 110 mm Each 179.00421 P' Trap ( Big without Air vent ) 110 mm Each 165.00422 Floor Trap (Bell Mouth ) 110 mm Each 170.00423 Bell Mouth Trap 7 " ( 177.8 mm) Each 249.00424 4" (101.6 mm ) Nahany Trap ( Without Jali with inlet) Each 85.00425 3" (76.2 mm ) Nahany Trap ( without Jali without inlet) Each 66.00426 4" (101.6 mm ) Nahany Trap ( without inlet with out Jali) Each 81.00427 Mini Trap Each 40.00428 3" (76.2 mm ) Nahany Trap with Jali Each 77.00429 4" (101.6 mm ) multi floor trap with Jali Each 109.00430 4" (101.6) multi floor trap with out Jalli Each 85.00431 Round Jali Each 18.00432 Square tile & Jalli Each 29.00433 Pipe connector ( with LIP ring) Each 113.00434 Pipe connector ( with out LIP ring) Each 88.00435 Floor Traps 436 4" (101.6 mm ) Floor Trap - Each 104.00437 5" (127.mm ) floor Trap Each 110.00

Door cap 438 75 mm dia Each 43.00

77


439 90 mm dia Each 48.00440 110 mm dia Each 55.00

Socket Plug 441 75 mm dia Each 40.00442 90 mm dia Each 46.00443 110 mm dia Each 48.00

Rubber Ring for socket 444 75 mm dia Each 6.00445 90 mm dia Each 7.00446 110 mm dia Each 9.00

Door Socket 447 75 mm dia Each 7.00448 90 mm dia Each 9.00449 110 mm dia Each 10.00450 LIP ring 110 mm Each 52.00

Rubber Lubricant 451 100 Grams Each 22.00452 250 Grams Each 49.00453 500 Grams Each 89.00454 1000 Grams Each 165.00455 P' Trap with lip Ring Each 225.00

Solvent Cement 456 50 ml Each 11.00457 100 ml Each 19.00458 250 ml Each 45.00459 500 ml Each 87.00460 1000 ml Each 170.00

Internal Reducer. 461 110mm x 90 mm Each 68.00462 160 mm x 110 mm Each 169.00

CENTRIFUGAL CAST IRON PIPES & FITTNGS AS PER IS: 3989 - 1984

CI (spun) soils Waste & Ventilating pipe (3 M) 463 75 mm dia Each 839.00464 100 mm dia Each 1118.00465 150 mm dia Each 2050.00

CI (spun) soils Waste & Ventilating pipe (3 M) Double socket 466 75 mm dia Each 932.00467 100 mm dia Each 1258.00

9 feet (2743.2 mm ) pipes 468 75 mm dia Each 756.00469 100 mm dia Each 1008.00

8 feet (2438.4) mm ) pipes 470 75 mm dia Each 675.00471 100 mm dia Each 898.00

6 feet (1828.8 mm ) pipes 472 75 mm dia Each 550.00473 100 mm dia Each 717.00

6 feet (1828.8 mm ) pipes Double socket 474 75 mm dia Each 578.00475 100 mm dia Each 717.00

78


Cut pipes (pieces) 1 foot (304.8 mm) 476 75 mm dia Each 200.00477 100 mm dia Each 230.00

Cut pipes (pieces) 1'.6" (457.2 mm ) 478 75 mm dia Each 287.00479 100 mm dia Each 330.00480 150 mm dia Each 630.00

Cut pipes (pieces ) 2 feet (609.6 mm) 481 75 mm dia Each 396.00482 100 mm dia Each 438.00483 150 mm dia Each 789.00

Cut pipes (pieces ) 3 feet (914.4 mm) 484 75 mm dia Each 607.00485 100 mm dia Each 819.00

Cut pipes (pieces ) 4 feet (1219.2 mm) 486 75 mm dia Each 668.00487 100 mm dia Each 1000.00

Plain Bend 488 75 mm dia Each 206.00489 100 mm dia Each 243.00490 150 mm dia Each 579.00

Door Bend 491 75 mm dia Each 213.00492 100 mm dia Each 276.00493 150 mm dia Each 633.00

Plain Bend 45 Degrees. 494 75 mm dia Each 206.00495 100 mm dia Each 243.00496 150 mm dia Each 579.00

Door Bend 45 Degrees. 497 75 mm dia Each 213.00498 100 mm dia Each 276.00499 150 mm dia Each 633.00500 Horn Bend Plain 101.6 x 50.8 mm (4" x 2") 100 mm dia Each 420.00501 Horn Bend door 101.6 x 50.8 mm (4" x 2") 100 mm dia Each 489.00

Heel Rest Bend 502 75 mm dia Each 220.00503 100 mm dia Each 281.00504 150 mm dia Each 596.00

Single Branch Plain "T" 505 75 mm dia Each 276.00506 100 mm dia Each 374.00507 150 mm dia Each 770.00

Single Branch Door "T" 508 75 mm dia Each 325.00509 100 mm dia Each 433.00510 150 mm dia Each 813.00

Single Branch plain "Y" 511 75 mm dia Each 325.00512 100 mm dia Each 433.00513 150 mm dia Each 954.00

79


Single Branch Door "Y" 514 75 mm dia Each 357.00515 100 mm dia Each 478.00516 150 mm dia Each 1029.00

Double Branch Plain "T" 517 75 mm dia Each 378.00518 100 mm dia Each 509.00

Double Branch Door "T" 519 75 mm dia Each 421.00520 100 mm dia Each 530.00

Double Branch Plain " Y" 521 75 mm dia Each 421.00522 100 mm dia Each 530.00

Double Branch Door " Y" 523 75 mm dia Each 444.00524 100 mm dia Each 575.00

Shoe bend 525 75 mm dia Each 260.00526 100 mm dia Each 304.00527 150 mm dia Each 619.00

Collar 528 75 mm dia Each 178.00529 100 mm dia Each 216.00530 150 mm dia Each 444.00

Cowl 531 75 mm dia Each 157.00532 100 mm dia Each 178.00533 150 mm dia Each 400.00

Offset 3" (76.2 mm ) projection 534 75 mm dia Each 228.00535 100 mm dia Each 276.00536 150 mm dia Each 559.00

Offset 6" (152.4mm ) projection 537 75 mm dia Each 249.00538 100 mm dia Each 325.00539 150 mm dia Each 650.00

Long Door Bend 540 75 mm dia Each 524.00541 100 mm dia Each 564.00

Hand Hole pipe ( Inspection pipe) 542 75 mm dia Each 302.00543 100 mm dia Each 410.00544 150 mm dia Each 546.00

P Traps 545 75 mm dia Each 325.00546 100 mm dia Each 447.00547 4" x 3" (101.6 mm x 76.2mm ) P. Traps 100 mm dia Each 512.00548 4" x 3" (101.6 mm x 76.2mm ) Vent Traps 100 mm dia Each 512.00549 4" x 3" (101.6 mm x 76.2mm ) Reducer 75 mm dia Each 318.00550 6" x 4" (152.4 mm x101.6 mm ) Reducer 75 mm dia Each 435.00551 3" x 2" ( 76.2 mm x 50.8 mm ) plain T 75 mm dia Each 272.00

80


552 3" x 2" ( 76.2 mm x 50.8 mm ) Door T 75 mm dia Each 424.00553 3" x 2" ( 76.2 mm x 50.8 mm ) Plain Y 75 mm dia Each 424.00554 3" x 2" ( 76.2 mm x 50.8 mm ) Door Y 75 mm dia Each 424.00555 4" x 3" (101.6 mm x 76.2mm ) Plain T 75 mm dia Each 424.00556 4" x 3" (101.6 mm x 76.2mm ) Door T 75 mm dia Each 450.00557 4" x 3" (101.6 mm x 76.2mm ) Plain Y 75 mm dia Each 450.00558 4" x 3" (101.6 mm x 76.2mm ) Door Y 75 mm dia Each 480.00559 6" x 4" (152.4 mm x101.6 mm ) Plain T 75 mm dia Each 629.00560 6" x 4" (152.4 mm x101.6 mm ) Door T 75 mm dia Each 680.00561 6" x 4" (152.4 mm x101.6 mm ) Plain Y 75 mm dia Each 720.00562 6" x 4" (152.4 mm x101.6 mm ) Door Y 75 mm dia Each 880.00 Special Types of Long Fittings

Plain " T" 27 " (685.8 mm ) 563 75 mm dia Each 912.00564 100 mm dia Each 1281.00 Door "T" 27" (685.8 mm ) 565 75 mm dia Each 1019.00566 100mm dia Each 1407.00

Plain " Y" 27" (685.8 mm) 567 75 mm dia Each 1019.00568 100mm dia Each 1407.00

Door " Y" 27" (685.8 mm) 569 75 mm dia Each 1136.00570 100mm dia Each 1545.00

MISCELLANEOUS ITEMS 571 a) Supplying & Fixing solder joints up to 50.8 mm dia Each 41.00572 b) - do - labour charges only Each 13.00573 a) Supplying & Fixing solution joints up to 50.8 dia Ist quality. Each 8.00574 b) - do - labour charges only Each 2.00575 Chiselling the stone masonry wall for fixing of wooden blocks

including finishing as directed by the department Each 19.00

576 Chiselling the stone masonry wall and repairs as directed by the department.

1 Rm 89.00

577 Chiselling the brick masonry wall and repairs as directed by the department.

1 Rm 19.00

578 a) S & F NP telephonic shower spray set & valve mixer with rest and all fittings complete (ARK/ESSCO or equivalent make)

Each 1454.00

579 b) - do - labour charges only Each 229.00580 a) S & F NP shower spray fancy with NP Flexible pipe Each 386.00581 b) - do - labour charges only Each 76.00582 a) S & F NP cover for nahany trap Each 21.00583 b) - do - labour charges only Each 10.00584 a) Painting the flushing tank with white enamel paint Each 70.00585 b) - do - labour charges only Each 36.00586 S & F internal fittings for flush tank Parryplast wonder flush or


587 Repairing and over hauling flushing tank Each 51.00588 a) Supplying & Fixing NP chain rubber and plugh for baisn Each 27.00589 b) - do - labour charges only Each 4.00590 a) S & F 25.4 mm dia & 609.6 mm long aluminium anodized

towel rod with brackets and aluminium screwsEach 110.00

591 b) - do - labour charges only Each 25.00592 a) S & F 19.04 mm dia & 609.6 mm long aluminium anodized Each 95.00

81


towel rod with brackets and aluminium screws593 b) - do - labour charges only Each 38.00594 a) S & F 609.6 mm long 127 mm wide plate glass shelf with

superior quality aluminium railing complete with aluminium screws

Each 140.00

595 b) - do - labour charges only Each 32.00596 a) S & F 609.6 mm long 127 mm wide plate glass shelf only Each 45.00597 b) - do - labour charges only Each 6.00598 a) S & F NP soap dish heavy type with NP SCREWS Each 163.00599 b) - do - labour charges only Each 7.00600 a) S &F NP holder brackets with screws Each 33.00601 b) - do - labour charges only Each 8.00602 a) S & F liquid soap container NP metalic with NP brackets and

screws.Each 163.00

603 b) - do - labour charges only Each 13.00604 a) S & F 31.75 mm C.P TRAPS Each 210.00605 b) - do - labour charges only Each 25.00606 a) Supplying & fixing 88.9 mm A.C cowls Each 47.00607 b) - do - labour charges only Each 8.00608 a) Supplying & fixing A.C Cowl 63.5 mm dia Each 33.00609 b) - do - labour charges only Each 6.00610 Removing and refixing W.C s Each 154.00611 Removing and refixing wash hand basins of any size with

fittings completeEach 121.00

612 a) S & F 76.2 x 101.6 mm teak wood block complete Each 17.00613 b) - do - labour charges only Each 5.00614 Cutting holes in C.C; basement & repairs Labour charges only Each 57.00615 Cutting holes in stone masonry & basement and repairs Labour

charges only Each 38.00

616 Cutting holes in Brick masonry & repairs Labour charges only Each 25.00617 Cutting holes in RCC slab floor & repairs Labour charges only Each 38.00618 a) Supplying & Fixing 12.7 mm PVC connection with brass

union nut C.P coatedEach 67.00

619 b) - do - labour charges only Each 13.00620 a) S & F 12.7 mm .M.P couplings Each 24.00621 b) - do - labour charges only Each 6.00622 a) S & F 19.05 mm M.P couplings Each 27.00623 b) - do - labour charges only Each 6.00624 a) S& F MP coupling 25.4 mm dia Each 64.00625 a) S & F PVC Rubber adopter for LLC and bend Each 13.00626 b) - do - labour charges only Each 4.00627 a) S& F 31.75 mm Brass union nuts Each 24.00628 b) - do - labour charges only Each 4.00629 a) S& F 38.1 mm Brass union nuts Each 25.00630 b) - do - labour charges only Each 5.00631 a) Constructing Brick masonry chamber over the gully trap or

peet valve and fitted with 304.8 x 228.6 m size CI frame and hinged cover.

Each 305.00

632 b) - do - labour charges only Each 57.00633 a) Constructing Brick masonry support for G.I pipe with C.M

304.8 x 228.6 x228.6 mm size including plastering and finishing etc. complete.

Each 49.00

634 b) - do - labour charges only Each 13.00635 a) Supplying & fixing 304.8 x 228.6 mm CI frame & cover over Each 80.00

82


gully taps636 b) - do - labour charges only Each 20.00637 a) Supplying & fixing CI Nahany trap grating Each 13.00638 b) - do - labour charges only Each 6.00639 a) Supplying & fixing CI gully trap grating Each 33.00640 b) - do - labour charges only Each 6.00641 a) Supplying & fixing valves for brass ball cocks 25.4 mm dia Each 13.00642 b) - do - labour charges only Each 5.00643 a) Supplying & fixing 12.7 m valve for bib tap or stop cocks Each 12.00644 b) - do - labour charges only Each 3.00645 a) Supplying & fixing 19.05 m valve for bib tap or stop cocks Each 20.00646 b) - do - labour charges only Each 4.00647 Removing 12.7 mm GI pipe and refixing the same Rm 33.00648 Removing 19.05 mm GI pipe and refixing the same Rm 38.00649 Removing 25.4 mm GI pipe and refixing the same Rm 56.00650 Removing 38.1 mm GI pipe and refixing the same Rm 70.00651 Removing 50.8 mm GI pipe and refixing the same Rm 83.00652 Cleaning the W.C with acid and Vim powder Each 19.00653 Cleaning the Urinal with acid and Vim power Each 19.00654 Cleaning the wash basin with acid and Vim powder Each 19.00655 Cleaning the E.W.C with acid and Vim power Each 19.00656 a) Supplying & fixing 914.4 x 457.2 mm CI man hole frame and

cover (light weight) 30 KgsEach 1050.00

657 b) - do - labour charges only Each 51.00658 a) Supplying & fixing CI steps for septic tank. Each 33.00659 b) - do - labour charges only Each 6.00660 a) Supplying & fixing 50.8 cm dia C.I. Man hole frame & cover

for 914.4 mm dia chamber (20 Kgs - Light weight)Each 511.00

661 b) - do - labour charges only Each 38.00662 a) Supplying & fixing 50.8 cm dia C.I. Man hole frame & cover

for 914.4 mm dia chamber (Medium weight) as per IS:1726 - 40 Kgs

Each 1400.00

663 b) - do - labour charges only Each 83.00664 Constg. 50.8 mm thick RCM baffle wall with 2.267 Kg steel &

rabbit wire mesh in CM 1:3 with fine rendering in neat cement labour charges Only

1 Sqm 140.00

665 a) Constg. 50.8 mm RCC partition wall 1 Sqm 160.00666 b) - do - labour charges only 1 Sqm 25.00667 a) S & F double layer of bamboo matting tarred on both sides. 10 Sqm 381.00668 b) - do - labour charges only 10 Sqm 64.00669 Removing of 101.6 m or 76.2 mm CI pipe 1 RM 19.00670 a) Supplying & fixing 76.2 mm W.I clamps Each 11.00671 b) - do - labour charges only Each 4.00672 a) Supplying & fixing NP coat hook Each 27.00673 b) - do - labour charges only Each 6.00674 Supplying & fixing small precast RCC water tanks including

cover over the roof of building1 Lit 4.00

675 Labour charges for laying glazed tiles 1 Sqm 64.00676 a) Supplying and fixing TV shape mirror with plastic frame size

609.6 mm x 457 .2 mmEach 334.00

677 b) - do - labour charges only Each 66.00678 a) Supplying & fixing GI pipe plug of size 12.7 mm dia Each 3.00679 b) - do - labour charges only Each 1.00

83


680 a) Supplying & fixing 19.06 mm dia GI plug Each 4.00681 b) - do - labour charges only Each 1.00682 a) Supplying and fixing 38.1 mm dia of GI plug Each 15.00683 b) - do - labour charges only Each 4.00684 a) Supplying & fixing 50.8 mm dia of GI PLUG Each 33.00685 b) - do - labour charges only Each 6.00686 a) Supplying & fixing 76.2 mm dia of GI PLUG Each 47.00687 b) - do - labour charges only Each 10.00688 a) Supplying & fixing C.P flange. Each 11.00689 b) - do - labour charges only Each 4.00690 a) Supplying & fixing stainless steel sink size 36" x 18"

(914.4x457.2mm) 1 mm thick with accessoriesEach 4259.00

691 b) - do - labour charges only Each 191.00692 a) Supplying & fixing SINGLE BOWL stainless steel sink size

24"x18"x8 " (609.6 x 457.2 x 203.2mm) 1 mm thick with accessories

Each 3527.00

693 b) - do - labour charges only Each 191.00694 a) Supplying & fixing stainless steel sink size 20" x18" x 8 "

(508x457.2x203.2mm) 1 mm thick with accessoriesEach 3194.00

695 b) - do - labour charges only Each 191.00696 Supplying & fixing 4 " x 24 " (101.6x609.6mm) white glazed

porcelain channel fixed in brick masonry white cement pointing.Each 303.00

697 Supply & Fixing of steel surgical long elbow action handle 12.7 mm dia bib cock Indian make heavy type including all materials

Each 640.00

698 Supply & fixing 2 1/2" (63.5mm) dia Sluice valve ISI mark with 2 Nos. flanges, 8 nos, 3/4" dia nuts & bolts and all necessary washers and packing materials etc. complete

Each 3607.00

699 Supply & fixing porcelain P' trap Each 152.00700 Supplying & fixing oval shape basin white(520x410mm) parry

or equivalentEach 1571.00

701 Supply & fixing RCC cover 22" dia with nominal reinforcement 3 " thick and hooks for lifting

Each 532.00

702 Supply & fixing cp spl. Grating with frame and cover of Ist quality

Each 38.00

703 Supply & fixing towel rod (CP) of 24" long and 3/4 " dia Each 248.00704 Supply & fixing of LLC handle set Ist quality Each 53.00705 Supply & fixing 4" dia CP thimble pipe 0.00706 a) 150 mm long Each 266.00707 b) 220 mm long Each 399.00708 c) 300 mm long Each 532.00709 Supply & fixing CP long bend Each 216.00710 Supply & fixing CP short bend Each 108.00711 Supplying & fixing bib cock with flange C.P Jaquar make queen

series.Each 1075.00

712 Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook of Jaquar make queen series with 7 years warranty

713 a ) Chrome plated Each 3088.00714 b) Ivory gold Each 5116.00715 Supply & fixing pillar cock Jaquar make Queen series with 7

years warranty

716 a ) Chrome plated Each 1203.00717 b) Ivory gold Each 2015.00718 Supply & fixing Angular stop cocks with wall flange Jaquar make

Queen series with 7 years warranty

84


719 a ) Chrome plated Each 1164.00720 b) Ivory gold Each 2288.00721 Supply & fixing Waste coupling Jaquar make with 7 years

warranty

722 a ) Chrome plated Each 280.00723 Supply & fixing of Bottle trap Jaquar make with 7 years

warranty

724 a ) Chrome plated Each 1170.00725 b) Ivory gold Each 1840.00726 Supply & Fixing copper pipe 450 mm long with nuts & washers

Jaquar make with 7 years warranty

727 a ) Chrome plated Each 280.00728 b) Ivory gold Each 546.00729 Supply and fixing wall mirror with provision for over head

shower and 115 mm long bend pipe with wall flange Jaquar make queen series with 7 years warranty

730 a) Chrome plated Each 3543.00731 b) Ivory gold Each 6396.00732 Supply & fixing overhead shower rose with revolving joint and

150 mm long swivel shower arm Jaquar make queen series. with 7 years warranty

733 a) Chrome plated Each 1625.00734 b) Ivory Gold Each 2503.00735 Supply and Fixing Wall Mixer with Telephonic shower

arrangement with crutch and flexible pipe Jaquar series Ivory gold colour for bath tub. with 7 years warranty

Each 9906.00

736 Supply & fixing Bath tub overflow set complete with over flow cap, 450 mm Ball chain with rubber plug & union bend with brass nut Jaquar make, Ivory gold colour. with 7 years warranty

Each 1138.00

737 Supply & fixing sink cock with regular swinging spout with wall flange chromeplated Jaquar make Queen series with 7 years warranty

Each 1710.00

738 Supply & fixing soap dish Jaquar make queen series: with 7 years warranty

739 a) Chrome plated Each 1073.00740 b) Ivory Gold Each 1729.00741 Supply & fixing of toilet paper holder Jaquar make Queen

series. with 7 years warranty

742 a) Chrome plated Each 904.00743 b) Ivory Gold Each 1580.00744 Supply & Fixing of Towel ring Jaquar make Queen series with 7

years warranty

745 a) Chrome plated Each 845.00746 b) Ivory Gold Each 1443.00747 Supply & Fixing of towel coat hook Jaquar make Queen series

with 7 years warranty

748 a) Chrome plated Each 618.00749 b) Ivory Gold Each 1268.00750 Supply & Fixing of Towel rod 24 " Jaquar make Queen series

Ivory gold colour with 7 years warrantyEach 2230.00

751 Supply & Fixing of Tumbler holder Jaquar make Queen series, Ivory gold colour with 7 years warranty

Each 1567.00

752 Supply & fixing of Glass shelf 22" Jaquar make Queen series, Ivory gold colour with 7 years warranty

Each 3094.00

753 Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of Jaquar Continental series, Chrome Finish

Each 2197.00

85


with 7 years warranty754 Supply & Fixing of Bibcock Jaquar Continental series, Chrome

Finish with 7 years warrantyEach 644.00

755 Supply & Fixing of Pillar cock Jaquar Continental series, Chrome Finish with 7 years warranty

Each 800.00

756 Supply & Fixing of Angular stopcock with wall flange Jaquar Continental series, Chrome finish with 7 years warranty

Each 631.00

757 Supply fixing of Waste coupling Jaquar make, Chrome finish with 7 years warranty

Each 280.00

758 Supply & Fixing of Bottle Trap Jaquar make, Chrome finish with 7 years warranty

Each 1235.00

759 Supply & Fixing of copper pipe 450mm long with nuts & washers Jaquar make, Chrome Finish with 7 years warranty

Each 280.00

760 Supply & Fixing of Wall Mixer with provision for overhead shower and 115mm long bend pipe with wall flange Jaquar make Continental series, Chrome finish with 7 years warranty

Each 2828.00

761 Supply & Fixing of Exclusive overhead shower with 190mm long light body shower arm Jaquar make Continental series, Chrome finish with 7 years warranty

Each 1300.00

762 Supply & Fixing wall mixer with telephonic shower arrangement with crutch and telephone shower with flexible tube Jaquar make Continental series Chrome colour for bath tub with 7 years warranty

Each 3991.00

763 Supply & Fixing bath tub over flow set complete with over flow cap,450mm ball chain with rubber plug 7 Union bend with brass nuts Jaquar make, Chrome colour with 7 years warranty

Each 819.00

764 Supply & Fixing Sink cock with regular swinging spout with flange chrome plated Jaquar make Continental series with 7 years warranty

Each 1138.00

765 Supply & Fixing soap dish Jaquar make Continental series, Chrome Finish with 7 years warranty

Each 878.00

766 Supply & Fixing of Toilet paper holder Jaquar make Continental series, Chrome finish with 7 years warranty

Each 644.00

767 Supply & Fixing of Towel Ring Jaquar make Continental series, Chrome finish with 7 years warranty

Each 741.00

768 Supply & Fixing Double coat hook Jaquar make Continental series, Chrome finish with 7 years warranty

Each 553.00

769 Supply & Fixing of towel rail 24'' Jaquar make Continental series, Chrome finish with 7 years warranty

Each 1196.00

770 Supply & Fixing of Tumbler holder Jaquar make Continental series, Chrome finish with 7 years warranty

Each 806.00

771 Supply & Fixing of Glass shelf 22'' Jaquar make Continental series, Chrome finish with 7 years warranty

Each 1586.00

772 Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of Jaquar Florentine(Quarter turn) series, Chrome Finish with 7 years warranty

Each 2750.00

773 Supply & Fixing of Bibcock Jaquar Florentine (Quarter turn)series, Chrome Finish with 7 years warranty

Each 878.00

774 Supply & Fixing of Pillar cock Jaquar Florentine(Quarter turn) series, Chrome Finish with 7 years warranty

Each 878.00

775 Supply & Fixing of Angular stopcock with wall flange Jaquar Florentine( Quarter turn)series, Chrome finish with 7 years warranty

Each 845.00

776 Supply & Fixing of Bottle Trap Jaquar make, Chrome finish with 7 years warranty

Each 1235.00

777 Supply & Fixing of Wall Mixer with provision for overhead shower and 115mm long bend pipe with wall flange Jaquar make Florentine(Quarter turn) series, Chrome finish with 7 years warranty

Each 3283.00

86


778 Supply & Fixing wall mixer with telephonic shower arrangement with crutch and telephone shower with flexible tube Jaquar make Florentine(Quarter turn) series Chrome colour for bath tub with 7 years warranty

Each 5103.00

779 Supply & Fixing Sink cock with regular swinging spout with flange chrome plated Jaquar make Florentine(Quarter turn) series with 7 years warranty

Each 1359.00

780 Supply & Fixing of Rose shower with revolving ball joint & 115mm long shower arm with 7 years warranty

Each 1560.00

781 Supply & Fixing of Jaquar make chrome plated Metro pole flush valve concealed type with cover plate 40mm size with 7 years warranty

Each 2730.00

782 Supply & Fixing of Jaquar make Sensotronic sensor faucet for wash basin, Chrome plated with 7 years warranty

Each 10725.00

783 Supply & fixing of Jaquar make sensotronic concealed type flushing valve for urinal complete set with installation box with control cock, Chrome plated with 7 years warranty

Each 10725.00

784 Supply & fixing of Jaquar make Auto closing system pillar cock for wash basin, Chrome plated with 7 years warranty

Each 1690.00

785 Supply& Fixing of Jaquar make Auto Closing system Bibcock, Chrome plated with 7 years warranty

Each 1690.00

S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite pressure pipes conforming to IS-15450-2004 with UV stabilized, carbon black for hot & cold water supply, capable to withstand pressure up to 80 C including all special composite fittings, plastic & brass blend inserts for elbows, tees, reducers, couplers, connectors etc complete for external works including laying pipes, fixing in position, testing and commissioning etc

786 16 mm OD pipe 1 RM 134.00787 20 mm OD pipe 1 RM 165.00788 25mm OD pipe 1 RM 207.00789 32 mm OD pipe 1 RM 278.00790 40 mm OD pipe 1 RM 365.00791 50 mm OD pipe 1 RM 465.00

S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite pressure pipes conforming to IS-15450-2004 with UV stabilized, carbon black for hot & cold water supply, capable to withstand pressure up to 80 C including all special composite fittings, plastic & brass blend inserts for elbows, tees, reducers, couplers, connectors etc complete with MS Iron clamps at 1.0 M spacing including cutting, chasing walls, making good, laying pipes, fixing in position, testing and commissioning etc

792 16 mm OD pipe 1 RM 193.00793 20 mm OD pipe 1 RM 231.00794 25mm OD pipe 1 RM 285.00795 32 mm OD pipe 1 RM 376.00796 40 mm OD pipe 1 RM 488.00797 50 mm OD pipe 1 RM 616.00

S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite pressure pipes conforming to IS-15450-2004 with UV stabilized, carbon black for hot & cold water supply, capable to withstand pressure up to 80 C including all special composite fittings, plastic & brass blend inserts for elbows, tees, reducers, couplers, connectors etc complete including excavating trenches up to 1.0 M deep laying pipes, fixing in position, testing, refilling excavated earth and commissioning etc

798 16 mm OD pipe 1 RM 157.00

87


799 20 mm OD pipe 1 RM 186.00800 25mm OD pipe 1 RM 226.00801 32 mm OD pipe 1 RM 293.00802 40 mm OD pipe 1 RM 375.00Note: 1) All the items to be used on work are of first quality & ISI and as approved by the

Engineer In charge of the work.2) Rates given above are:

A) Rate for finished item of workB) Labour charges only

3) RATESSupply Rates for all the materials like pipes, WC's, wash hand basins etc., are based on market rates plus Sales Tax/ VAT. Composite tax on finished items may be allowed as applicable.

4) LABOURLabour charges are increased based on proposals and market rates

5) Coloured porcelain items:50% extra may be allowed on basic cost of white porcelain items excluding fittings

6) SSR rates for Sanitary & water supply items are purely for guidance for the officers for preparation of estimates vide Para 113 of APPWD code. Authority who prepares the estimate is however responsible for proper rates as envisaged in Para 45 of APPWD code.

88

ELECTRICAL ITEMS

89

Electrical Items (Buildings)

FOR ELECTRICAL WORKS

1 For ceiling fan Khaitan, Orient and all brands of standard makes shall be included as per the request of the occupants based on the prevailing market rates as on 29.01.2007

2. Indo Asian make switch gear, Asian Electrical, Arian Raymond Lighting Fixtures, Power King wires etc to be adopted as per the prevailing market rates as on 29.01.2007.

3. The area allowances in jail compounds and in rural areas have to be invariably followed as per the prevailing common Civil SSR.

4. The departmental stores procurement was dispensed with by the department, hence the procurement of materials is to be invariably got executed through the agency.

5. As per the rule 45 under IER the electrical contactor is solely responsible for both quantity and quality.

6. In case of any addition to proposed SSR, the approval has to be obtained from the Chief Engineer (Buildings) through Superintending Engineer (R&B) Electrical circle. Temporary approval for any make of material, which is under the relevant specifications of the BIS / ISO, can be given by the Superintending Engineer (R&B) Electrical / Executive Engineer (R&B) Electrical.

7. Proposing specific make in SSR in the estimate is with in the scope of concerned field officers subject to availability of materials in such areas.

8. The Superintending Engineer (R&B) Electrical will review the performance over the quality of the makes proposed in the SSR from time to time and incase of any deficiency the same shall be brought to the notice of Chief Engineer (Buildings) to consider for deletion from list.

9 The Government instruction for usage of energy efficient luminaries has to be invariably followed while proposing the fixtures in the estimates.

10 In case of stair case point wiring where two way switch control wiring is necessary an extra at 50% excess over each point shall be allowed.

11 Wherever the fan light point wiring is provided at a length/ height of 15 feet and above then an extra @ 50% against each point shall be allowed.

12 The rates for item such as lifts, Transformers, Generators, Pump sets, Refrigerators, A.C. units/ Plants and water coolers etc have to be invariably followed based on the prevailing market rates, since the rate and specification etc varies from manufacture to manufacturers considerably, hence not incorporated in the rate schedule and also subject to availability in such areas. How ever relevant date without rates is provided in the standard date for electrical works.

13 The existing procedure of incorporating the list of approved makes for use of materials in the works in tender schedule/ agreements are dispensed with since the options are provided in the SSR

14 The rates for common civil items including labour charges whenever varies in the common civil SSR have to be invariably followed irrespective of revision of electrical SSR.

15 The rates for all types of fixtures proposed are inclusive of prevailing taxes etc without the cost of tubes and bulbs.

16 The datas which are reviewed by the center for good Governance and submitted to the Government are taken into consideration for working out rate against each finished item of work for preparation of estimates.

17 The Schedule of rates is only for guidance of officers for preparation of estimate as per the Para 113 of APPWD code. The Authority who sanction/ prepare the estimates is however responsible for adopting the proper rates as envisaged in Para 45 of APPWD code.

90


91


I N D E X

SL.NO.

DESCRIPTION

PAGE NO

FROM TO

I M.S.CONDUIT PIPES, PVC PIPES, CASING AND CAPING 1

II & III WIRING & RUN OF MAINS (Copper wire, Switches & Acccessories) 2 6

IV SWITCH GEAR & MCB DISTRIBUTION BOARDS 7 15

SDFU,COS,MCCB,MCB,ISOLATOR,ELCB,DB's AND VOLTAGE SURGE PROTECTORS

V EARTHING (Covered in Miscellaneous Item i.e. at Page No.48 to 54) -- --

VI SERVICE MAINS & L.T.O.H. LINES 16

VII FLUORESCENT, HPSV, M.H. STREET LIGHTS, POST TOP, WELL GLASS AND FLOOD LIGHT LUMANAIRES.

17 24

VIII INTERNAL LUMANAIRES, MIRROR OPTIC, T-5 CFL DOWN LIGHTS 25 32

IX AIR CONDITIONING, REFRIGERATION AND FANS 33 36

X WATER HEATERS 36

XI ACCESSORIES TO WATER PUMPS 37

XII BUSBARS(Rates Covered in Miscellaneous Items)

XIII SWAGED POLES, GARDEN POSTS AND ACCESSORIES 37

XIV CONTROL PANEL AND METERING EQUIPMENT 38

XV U.G. CABLES, GLANDS AND LUGS 39 44

XVI TEMPORARY ILLUMINATION(As per standard Data) -- --

XVII GENERATORS, TRANSFORMERS, S.S. Eqpt, PROTECTIVE GEARS, CAPACITORS AND ACB's.

45 48

XVIII REPAIRS TO MOTORS AND REWINDING 48

XIX MISCELLANEOUS 48 54

92


ELECTRICAL ITEMSI. M. S. Conduit Pipes (Rate per 100 Mtrs)Sl.No. 1 2 3 4 5Dia 20 mm 25 mm 32 mm 38 mm 50 mmThickness 16 SWG 16 SWG 16 SWG 16 SWG 16 SWG

NAI 4,725.00 5,825.00 9,000.00 --- ---BHARAT 4,500.00 5,300.00 8,000.00 --- ---GB 4,725.00 5,850.00 9,000.00 5,730.00 9,880.00

I. PVC Pipes (Rate per 100 Mtrs)Sl.No. 6 7 8 9 10 11 12Dia 20 mm 25 mm 20 mm 25 mm 32 mm 40 mm 50 mmThickness 1.5 mm 1.5 mm 2 mm 2 mm 2 mm 2 mm 2 mm

Mercury 1,124.00 1,745.00 1,478.00 1,952.00 3,105.00 4,141.00 6,113.00SudhakarISI

1,124.00 1,745.00 1,478.00 1,952.00 3,105.00 4,141.00 6,113.00

ATUL 1,047.00 1,396.00 1,397.00 1,861.00 2,444.00 3,200.00 3,637.00SudhakarNon ISI

1,047.00 1,396.00 1,397.00 1,861.00 2,444.00 3,200.00 3,637.00

Hanuman 737.00 1,130.00 --- --- --- --- ---Rama 877.00 1,130.00 --- --- --- --- ---Durga 1,047.00 1,396.00 1,397.00 1,861.00 2,444.00 3,200.00 3,637.00Nelco 1,192.00 1,721.00 1,975.00 2,081.00 2,869.00 3,712.00 5,119.00Avon PlastISI

1,600.00 2,100.00 --- --- 3,900.00 5,500.00 8,300.00

Modi ISI 1,390.00 1,875.00 1,775.00 2,410.00 3,270.00 5,160.00 7,350.00

I. Casing & Capping(Rate per One Mtr)Sl.No. 13 14 15 16Width 19 / 20 mm 25 mm 32 mm 38 / 40 mmHight 12.5 mm 12.5 mm 12.5 mm 2 mm

Diamond / Durga 19.95 25.40 29.05 49.90MODI 14.50 16.00 20.50 31.00

II. & III Wiring & Run of Mains

FR PVC Insulated Copper Wire(Rate per 100 Mtrs)Sl.No. 17 18 19 20 21 22 23Thickness 14/0.3

mm22/0.3

mm36/0.3

mm56/0.3 mm 84/0.3 mm 140/0.3 mm 126/0.4 mm

FINOLEX 944.00 1,416.00 2,277.00 3,355.00 5,300.00 --- ---RPG 896.00 1,345.00 2,163.00 3,187.00 5,035.00 --- ---Paragon 896.00 1,345.00 2,163.00 3,187.00 5,035.00 --- ---L & T 944.00 1,416.00 2,277.00 3,355.00 5,300.00 --- ---Gold Medal

860.00 1,310.00 2,082.00 3,181.00 4,775.00 7,943.00 17,221.00

Powerflex 1,095.00 1,708.00 2,608.00 4,071.00 6,358.00 10,166.00 16,871.00Polycab 896.00 1,345.00 2,163.00 3,187.00 5,035.00 --- ---Star 802.00 1,215.00 1,987.00 2,950.00 4,458.00 7,568.00 12,342.00Milltec 911.00 1,448.00 2,286.00 3,498.00 5,651.00 9,168.00 14,998.00PAWAN CAB

802.00 1,215.00 1,987.00 2,950.00 4,458.00 7,568.00 ---

93


PAYAL 1,012.00 1,543.00 1,987.00 2,950.00 4,458.00 7,658.00 12,342.00MILLION 802.00 1,215.00 1,987.00 2,950.00 4,458.00 7,568.00 12,342.00SMILE 1,012.00 1,543.00 1,987.00 2,950.00 4,458.00 7,658.00 12,342.00HAVELLES

1,016.00 1,522.00 2,266.00 3,552.00 5,550.00 9,201.00 14,478.00

Standard 1,081.00 1,616.00 2,511.00 3,783.00 5,905.00 9,685.00 15,240.00SUNCAB 860.00 1,310.00 2,082.00 3,181.00 4,747.00 7,943.00 17,221.00P - Flex 860.00 1,310.00 2,082.00 3,181.00 4,747.00 7,943.00 17,221.00Alankar 860.00 1,310.00 2,082.00 3,181.00 4,747.00 7,943.00 17,221.00

II. Wiring (Switches and Accessories) (Rate per Each)

S.No Description ANCHOR GOLD MEDAL

MILLION VIMAL MARU ICON

24 6A Switch (One way) 16.00 15.75 16.85 19.10 15.20 16.0025 6A Switch (Two way) 19.00 16.85 19.10 20.25 18.00 19.0026 6A Two pin Socket 15.50 15.20 19.65 --- 14.05 15.5027 6A 3/2 pin Socket 24.00 23.60 29.25 28.10 21.90 24.0028 6A Indicator lamp

Neon24.00 16.30 21.35 22.50 16.85 24.00

29 15A/10A Fuse flush 28.00 29.25 32.60 33.75 30.35 28.0030 Telephone Jack with

connector41.00 47.25 39.35 46.10 40.05 41.00

31 T.V antenne outlet 23.00 23.62 25.85 23.05 24.02 23.0032 Bed Switch /Bell push 26.00 16.30 27.00 --- 23.60 26.0033 Ceiling Rose 3 plate 17.00 20.25 22.50 21.90 18.00 17.0034 16A switch (1 way) 52.00 54.00 60.75 63.55 46.10 52.0035 16A socket 52.00 54.00 56.25 63.55 48.35 52.0036 16A switch socket

combined.79.00 85.50 103.50 101.25 81.00 79.00

37 16A (5 in one) 140.00 121.50 146.25 127.10 121.50 140.0038 16A Top Tringle 45.00 39.35 51.75 --- 45.00 45.0039 6A Top Tringle 32.00 29.25 33.75 --- 28.10 32.0040 BH / SBH 18.00 17.40 19.70 20.25 17.90 18.0041 32A DP Swtich F/T 80.00 101.25 112.50 119.25 97.90 80.0042 400W Electronic

Regulators (Socket type)

140.00 141.75 135.00 158.60 119.25 140.00

43 600W Electronic Regulators

189.00 230.60 225.00 247.50 208.10 189.00

44 Call bell 52.00 --- --- --- 57.35 52.0045 Buzzer 45.00 36.00 40.00 45.00 41.60 45.0046 Ding Dong bell 89.00 84.35 118.10 101.25 86.60 89.0047 Musical Bell

Electronic221.00 201.35 270.00 202.50 168.75 221.00

48 Pendent Holder / Adoptor

17.00 15.75 20.25 --- 12.90 17.00

49 Spikeguard (Deluxe / ROMA) 4 way

498.00 --- --- --- 495.00 ---

50 Anchor (EXCEL) 292.00 --- --- --- --- 292.0051 Bed Light

Transformer.--- 92.25 --- --- --- ---

52 MC Holder 10.00 10.00 10.00 10.00 10.00 10.00

II. Wiring (Mini Modular Switches)(Rate per Each)

94


Description ANCHOR Gold Medal MILLION53 6A 1 way switch 18.00 20.00 16.0054 6A 2 way switch 21.00 24.00 18.0055 Bell push 21.00 24.00 18.0056 Neon lmap indicator 21.00 24.00 16.0057 Master bell push with Neon 25.00 48.00 30.0058 2 pin Socket 18.00 21.00 18.0059 2 in one ksocket 27.00 28.50 24.0060 Electronic dimmer (EME) 188.00 240.00 210.0061 T.V out let delux 31.00 33.00 27.0062 Kit KAT fuse 16A 29.00 32.00 28.0063 Telephone out let with connector 38.00 48.00 35.0064 16A switch / Socket 54.00 57.00 54.0065 16A switch / Socket 2 in one 110.00 117.00 90.0066 16A 5 in one 135.00 148.00 120.0067 BH /SBH 26.00 26.00 15.5068 Ceiling Rose 3 Plate 18.00 22.00 20.0069 Plug top 6A 3 pin 26.00 28.00 25.0070 Plug top 16A 3 pin 37.00 38.00 35.0071 Cover frames for 6A switches 5.50 5.50 6.0072 Cover frames for 6A Socket / Master bell push 8.00 6.75 8.0073 Cover frames 16 A switch / Socket 22.00 22.50 22.0074 Cover frames for 16A 2 in 1 35.00 33.50 30.0075 Cover frames for 16A 5-in-one. 45.00 50.00 41.00

II. Wiring (Modular Switches)(Rate per Each) Sl.No. 76 77 78 79 80 81 82Description 6 / 10 A - 1

Way Switch

6 / 10 A - 2 Way

Switch

Neon Indicator

with switch

Bell Push with indicator

6 / 10 A 2 Pin socket

6 / A 2 in one Electronic dimmer

AnchorWoods

107.00 114.00 117.00 127.00 84.00 129.00 397.00

Mossaic 109.00 122.00 138.00 138.00 92.00 140.00 435.00Cabtree 92.00 101.00 110.00 115.00 76.00 168.00 390.00ABB 89.00 98.00 105.00 129.00 98.00 135.00 450.00GoldMedal

68.00 78.00 80.00 88.00 60.00 100.00 320.00

Vimal 67.00 70.00 --- 72.00 60.00 90.00 300.00North West

60.75 70.90 81.00 94.50 57.40 --- ---

Million 67.00 78.00 80.00 72.00 60.00 90.00 300.00SiemenDelta vega

102.00 109.00 108.00 138.00 92.00 145.00 485.00

SpectraMetallic

108.00 121.00 77.00 135.00 --- 139.00 465.00

Wave/Pointer

67.00 78.00 80.00 72.00 60.00 90.00 300.00

Sl.No. 83 84 85 86 87 88 89Description TV out let

deluxKit KAT

fuse 16ATelephone out let with

jack

Plug top 6A 3 pin

Plug top 16A 3pin

Cover frames 1 - Module (metallic)

Cover frames 2 - Module

AnchorWoods

87.00 99.00 109.00 --- --- 95.00 95.00

Mossaic 94.00 --- 83.00 92.00 161.00 110.00 115.00

95


Cabtree 80.00 102.00 116.00 84.00 107.00 107.00 107.00ABB 90.00 --- 85.00 --- --- 70.00 72.00GoldMedal

66.00 88.00 108.00 37.00 47.00 44.00 44.00

Vimal 85.00 85.00 85.00 --- --- 45.00 45.00North West

82.15 --- 109.10 --- --- 43.90 43.90


102.00 --- 95.00 --- --- 98.00 99.00

SpectraMetallic

121.00 135.00 115.00 83.00 110.00 54.00 54.00

Wave/Pointer

85.00 85.00 85.00 37.00 47.00 44.00 44.00

Sl.No. 90 91 92 93 94 95 96Description Cover

frames 3 - Module

Cover frames 4 -

Module

Cover frame 6 - Module

Cover frames 8-Horizontal

Cover frames 8 -

Vertical

Cover frames 12 - Module

Metal box concealed 1/2 module (78x78mm x 50mm deep)

AnchorWoods

120.00 138.00 198.00 266.00 240.00 324.00 26.00

Mossaic 139.00 171.00 203.00 219.00 --- 504.00 39.00Cabtree 118.00 135.00 169.00 228.00 202.00 274.00 28.00ABB 80.00 90.00 --- --- 150.00 210.00 42.00GoldMedal

52.00 60.00 84.00 115.00 140.00 160.00 24.00

Vimal 55.00 65.00 90.00 132.00 115.00 140.00 24.00North West

49.50 61.90 85.50 --- 123.75 172.10 20.25


125.00 145.00 205.00 279.00 249.00 335.00 38.00

SpectraMetallic

65.00 78.00 107.00 140.00 148.00 180.00 28.00

Wave 24.00 135.00 137.00 135.00 110.00 ---12 16A

Socket.169.00 52.00 186.00 150.00 --- ---

Wave/Pointer

52.00 60.00 84.00 115.00 115.00 140.00 24.00

Sl.No. 97 98 99 100 101 102Description Metal box

concealed 3 module (78x100

mm)

Metal box concealed 4 module (78x140

mm)

Metal box concealed 6

module (78x205

mm)

Metal box concealed 8 module (78x 230x60mm

deep)

Metal box concealed 8

module vertical (135x120 mm)

Metal box concealed 12 module vertical (135x205 mm)

AnchorWoods

39.00 48.00 69.00 112.00 106.00 116.00

96


Mossaic 39.00 55.00 86.00 86.00 --- 146.00Cabtree 35.10 45.00 68.00 105.00 98.00 110.00ABB 42.00 52.00 --- --- 99.00 145.00GoldMedal

36.00 42.00 73.00 102.00 --- 120.00

Vimal 37.00 44.00 68.00 108.00 98.00 110.00North West 21.40 27.00 54.00 --- 54.00 76.50Million 37.00 44.00 68.00 108.00 98.00 120.00SiemenDelta vega

42.00 54.00 86.00 119.00 116.00 140.00

SpectraMetallic

34.00 47.00 70.00 97.00 100.00 124.00

Wave/Pointer 37.00 44.00 68.00 108.00 98.00 120.00

IV. Switchgear & MCB Distribution BoardsCUBICLE TYPE SDFU (Rate per Each)Sl.No. 103 104 105 106 107 108 109Description 32A TPN 63A TPN 125A TPN 200A TPN 250A TPN 400A TPN 630A TPN

L&T 1,192.50 1,800.00 4,320.00 --- 6,896.25 10,462.50 15,975.00GE 1,080.00 1,563.00 4,050.00 4,865.60 6,187.50 9,843.75 15,750.00C & S 1,158.75 1,597.00 3,881.25 5,175.00 --- 10,462.50 17,437.50Havells 1,060.00 1,515.00 3,450.00 4,865.00 5,365.00 9,385.00 ---HPL 1,080.00 1,494.00 3,636.00 5,013.00 5,814.00 9,279.00 14,778.00Standard 1,005.00 1,457.00 3,307.00 4,571.00 5,567.00 8,760.00 14,179.00Crystal --- 2,486.00 3,600.00 5,017.00 6,638.00 10,181.00 12,004.00

(b) CHANGE OVER SWITCHES ON LOAD(Rate per Each)

S.No Description HPL GE Havells L & T Standard Crystal110 63 A - 4 Pole 3,240.00 3,251.00 2,740.00 2,812.00 2,678.00 4,359.00111 125 A - 4 Pole 6,085.00 5,613.00 4,700.00 5,062.00 4,494.00 ---112 200 A - 4 Pole 7,583.00 6,997.00 6,400.00 8,718.75 6,285.00 10,809.00113 250 A - 4 Pole 10,914.00 10,395.00 9,140.00 10,406.25 8,390.00 ---114 400 A - 4 Pole 16,675.00 15,648.00 13,760.00 15,468.75 12,800.00 17,775.00115 630 A - 4 Pole 18,883.00 18,247.00 15,655.00 18,000.00 15,475.00 27,698.00116 800 A - 4 Pole 26,436.00 25,987.00 22,470.00 24,750.00 20,460.00 35,381.00117 1000 A - 4 Pole 43,000.00 43,818.00 36,295.00 39,375.00 33,450.00 45,922.00

Sl.No. 133 134 135 136 137 138 139Description 40A TP

MCB to 63A T.P

MCB -do -

6-32A TPN MCB - do -

40A TPN MCB TO 63A TPN

MCB - do -

6-32A FP MCB - do -

40A FP MCB to 63 AFP MCB -

do -

63 FP MCB - do -

32A DP Isolator

MDS Legrend

1,386.00 1,190.00 1,782.00 1,190.00 1,782.00 --- 383.00

G. E 1,237.00 --- --- 1,096.00 1,575.00 --- 292.00

97


L & T Hager

1,237.00 --- --- 1,096.00 1,575.00 --- 292.00

Havells 1,040.00 855.00 1,305.00 960.00 1,215.00 1,390.00 ---HPL 1,042.00 911.00 1,215.00 1,002.00 1,296.00 1,498.00 ---Standard 1,010.00 825.00 1,275.00 915.00 1,165.00 1,345.00 ---Siemens 1,155.00 1,010.00 1,475.00 1,535.00 --- --- ---Indo Asian 1,000.00 820.00 1,271.00 922.00 1,172.00 1,336.00 ---Sputnik 915.00 616.00 1,032.00 652.00 810.00 1,091.00 ---Crystal 1,028.00 856.00 1,300.00 937.00 1,170.00 1,361.00 ---Milltec 915.00 616.00 1,032.00 652.00 810.00 1,091.00 ---GECO 915.00 616.00 1,032.00 652.00 810.00 1,091.00 ---

Sl.No. 140 141 142 143 144 145 146Description 40A DP

Isolator63A DP Isolator

40A TP Isolator

63A TP Isolator

40A FP Isolator

63A FP Isolator

80 A FP Isolator

MDS Legrend

383.00 515.00 661.00 770.00 859.00 938.00 987.00

G. E 303.00 382.00 528.00 607.00 675.00 742.00 798.00L & T Hager

303.00 382.00 528.00 607.00 675.00 742.00 ---

Havells 225.00 --- --- --- 575.00 --- ---HPL 273.00 344.00 496.00 556.00 617.00 648.00 799.00Standard 250.00 315.00 455.00 495.00 555.00 575.00 ---Siemens 280.00 340.00 460.00 510.00 586.00 640.00 ---Indo Asian 255.00 312.00 457.00 503.00 550.00 588.00 770.00Sputnik 222.00 245.00 360.00 382.00 427.00 461.00 ---Crystal 299.00 360.00 522.00 562.00 623.00 664.00 ---Milltec 222.00 245.00 360.00 382.00 427.00 461.00 ---GECO 222.00 245.00 360.00 382.00 427.00 461.00 ---

Sl.No. 147 148 149 150 151 152 153Description 100 A FP

Isolator40A 2

POLE 30 mA RCCB

63A 2 Pole 30 mA RCCB

40A 2 Pole 100m A RCCB




MDS Legrend

--- 2,432.00 2,799.00 2,529.00 2,908.00 2,783.00 3,215.00

G. E 900.00 2,255.00 2,593.00 2,349.00 2,700.00 2,531.00 2,981.00L & T Hager

900.00 2,255.00 2,593.00 2,345.00 2,700.00 2,531.00 2,981.00

Havells --- 1,680.00 2,255.00 1,650.00 2,160.00 2,060.00 2,405.00HPL 841.00 2,136.00 2,460.00 2,227.00 2,541.00 2,419.00 2,824.00Standard 750.00 1,680.00 2,255.00 1,650.00 2,160.00 1,995.00 2,275.00Siemens --- 2,050.00 2,425.00 2,140.00 2,485.00 2,365.00 2,760.00Indo Asian 770.00 1,627.00 2,155.00 1,596.00 2,067.00 2,015.00 2,350.00Sputnik 641.00 --- --- --- --- --- ---Crystal 836.00 1,879.00 2,537.00 2,083.00 2,415.00 2,182.00 2,648.00GECO 641.00 --- --- --- --- --- ---

Sl.No. 154 155 156 157 158 159 160

98


Description 40A 4 Pole 100 mA RCCB


SPN DB 4way with

IP-20 Protection.

SPN DB 8way with

IP-20 Protection.

SPN DB 12 way with IP-

20 Protection.

SPN DB 4 way with IP-42 Protection.

SPN DB 8 way with IP-42 Protection.

MDS Legrend

2,889.00 3,345.00 789.00 942.00 1,163.00 1,152.00 1,395.00

G. E 2,683.00 3,093.00 675.00 787.00 956.00 900.00 1,125.00L & T Hager

2,683.00 3,093.00 675.00 787.00 956.00 900.00 1,125.00

Havells 1,990.00 2,290.00 440.00 550.00 715.00 780.00 1,050.00HPL 2,541.00 2,926.00 415.00 556.00 729.00 688.00 931.00

Standard 1,915.00 2,240.00 345.00 455.00 585.00 585.00 795.00Siemens 2,455.00 2,840.00 --- --- --- --- ---

Indo Asian 1,944.00 2,244.00 371.00 485.00 632.00 601.00 825.00Sputnik --- --- 264.00 348.00 478.00 444.00 551.00Crystal 2,152.00 2,536.00 360.00 502.00 664.00 636.00 887.00Milltec 264.00 348.00 478.00 444.00 551.00GECO --- --- 264.00 348.00 478.00 444.00 551.00

Sl.No. 161 162 163 164 165 166 167Description SPN DB

12 way with IP-42 Protection.

TPN DB 4 way with

IP-20 Protection.

TPN DB 6 way with

IP-20 Protection.

TPN DB 8 way with IP-

20 Protection.

TPN DB 12 way with IP-

20 Protection.

TPN DB 4 way with IP-42

Protection.Metal doors

TPN DB 6 way with IP-42 Protection.

MDS Legrend

1,725.00 1,723.00 2,135.00 2,538.00 3,775.00 2,340.00 2,889.00

G. E 1,350.00 1,462.00 --- 2,137.00 3,206.00 1,884.00 ---L & T Hager

1,350.00 1,462.00 --- 2,137.00 3,206.00 1,884.00 ---

Havells 1,435.00 1,150.00 1,375.00 1,515.00 1,970.00 2,380.00 3,010.00HPL 1,235.00 1,377.00 1,640.00 1,923.00 2,683.00 1,893.00 2,379.00Standard 1,025.00 1,130.00 1,355.00 1,510.00 2,160.00 1,645.00 2,135.00Siemens --- --- --- --- --- --- ---Indo Asian 1,101.00 1,215.00 1,435.00 1,701.00 2,400.00 1,695.00 2,105.00Sputnik 686.00 843.00 990.00 1,192.00 1,350.00 1,142.00 1,215.00Crystal 1,170.00 1,271.00 1,575.00 1,879.00 2,587.00 1,777.00 2,284.00Milltec 686.00 843.00 890.00 1,192.00 1,350.00 --- ---GECO 686.00 843.00 990.00 1,192.00 1,350.00 1,142.00 1,215.00

Sl.No. 168 169 170 171 172 173 174Description TPN DB 8

way with IP-42

Protection.

TPN DB 12 way

with IP-42 Protection.

TPN Vertical

type DB 4 way with

IP-20 Protection.

TPN Vertical type DB 6

way with IP-20

Protection.

TPN Vertical type

DB 8 way with IP-20 Protection.

TPN Vertical type DB 12

way with IP-20 Protection.

TPN Vertical type DB 4 way with IP-42 Protection.

MDS Legrend

3,460.00 5,103.00 4,635.00 --- 5,717.00 8,322.00 5,580.00

G. E 2,756.00 4,106.00 --- --- --- --- ---

99


L & T Hager

2,756.00 4,106.00 --- --- --- --- ---

Havells 3,435.00 --- 5,175.00 --- 6,175.00 7,095.00 6,385.00HPL 2,936.00 4,110.00 3,493.00 --- 4,617.00 5,639.00 4,860.00Standard 2,395.00 3,585.00 3,570.00 --- 4,565.00 5,555.00 4,600.00Siemens --- --- --- --- --- --- 4,820.00Indo Asian 2,625.00 3,705.00 2,810.00 --- 3,790.00 4,822.00 40,009.00Sputnik 1,305.00 1,631.00 --- --- --- --- ---Crystal 2,891.00 4,005.00 --- --- --- --- ---GECO 1,305.00 1,631.00 --- --- --- --- ---

Sl.No. 190 191 192 193 194 195 196Description 415V,

TPN, 63A Rewirable fuse switch

in SS enclouser

415V, TPN, 100A Rewirable fuse switch

in SS enclouser

415V, TPN, 100A

Double break

switch in SS

enclouser

415V, TPN, 200A Double break switch

in SS enclouser

HRC Fuse links upto

32A

HRC Fuse links 32A to

63A

HRC Fuse links 125A to 200A

L & T 1,970.00 3,785.00 3,930.00 5,545.00 25.00 57.50 181.30G. E 1,970.00 3,785.00 3,930.00 5,545.00 25.00 57.50 181.30C & S 1,970.00 3,785.00 3,930.00 5,545.00 25.00 57.50 181.30Havells 1,970.00 3,785.00 3,930.00 5,545.00 25.00 57.50 181.30H. P. L 1,970.00 3,785.00 3,930.00 5,545.00 25.00 57.50 181.30Standard 1,970.00 3,785.00 3,930.00 5,545.00 25.00 57.50 181.30Crystal 1,970.00 3,785.00 3,930.00 5,545.00 25.00 57.50 181.30Milltec 1,970.00 3,785.00Sputnik 1,970.00 3,785.00 3,930.00 5,545.00 25.00 57.50 181.30

Sl.No. 197 198 199 200 201 202 203Description HRC Fuse

links 250A to 315A

HRC Fuse links 400A

HRC Fuse links 630A

240V, 32A porcelain rewirable fuse units.


415V, 63A porcelain

rewirable fuse units.


L & T 254.00 520.00 585.00 75.00 93.00 156.00 288.00G. E 254.00 520.00 585.00 75.00 93.00 156.00 288.00C & S 254.00 520.00 585.00 75.00 93.00 156.00 288.00Havells 254.00 520.00 585.00 75.00 93.00 156.00 288.00H. P. L 254.00 520.00 585.00 75.00 93.00 156.00 288.00Standard 254.00 520.00 585.00 75.00 93.00 156.00 288.00Crystal 254.00 520.00 585.00 75.00 93.00 156.00 288.00Sputnik 254.00 520.00 585.00 75.00 93.00 156.00 288.00Style Lamp 75.00 93.00 156.00 288.00

Sl.No. 204 205Description 415V, 200A

porcelain rewirable fuse units.


L & T 587.00 917.00G. E 587.00 917.00

100


C & S 587.00 917.00Havells 587.00 917.00H. P. L 587.00 917.00Standard 587.00 917.00Crystal 587.00 917.00Sputnik 587.00 917.00Style Lamp 587.00 917.00

Voltage Surge Protector(RATE PER EACH)Sl.No. 206 207 208 209 210 211 212Description 1 pole ( 1

Module ) 40 KA, 1.4

KV

2 pole ( 2 Module )

40 KA, 1.4 KV

4 pole ( 4 Module )

40 KA, 1.4 KV

1 pole ( 1 Module ) 15 KA, 1.2 KV



Changeover switch 20A, double pole 2 way, 400V A.C. (Suitable to fix on din channel )

L & T 3,748.00 6,820.00 12,823.00 2,998.00 5,456.00 10,260.00 1,433.00G. E 3,748.00 6,820.00 12,823.00 2,998.00 5,456.00 10,260.00 1,433.00C & S 3,748.00 6,820.00 12,823.00 2,998.00 5,456.00 10,260.00 1,433.00Havells 3,748.00 6,820.00 12,823.00 2,998.00 5,456.00 10,260.00 1,433.00H. P. L 3,748.00 6,820.00 12,823.00 2,998.00 5,456.00 10,260.00 1,433.00Standard 3,748.00 6,820.00 12,823.00 2,998.00 5,456.00 10,260.00 1,433.00Crystal 3,748.00 6,820.00 12,823.00 2,998.00 5,456.00 10,260.00 1,433.00Sputnik 3,748.00 6,820.00 12,823.00 2,998.00 5,456.00 10,260.00 1,433.00

Sl.No. 213 214 215 216 217 218 219Description 63A

Neutral link

100A Neutral

link

200A Neutral

link

20A, Bakelite fuse

units

32A, Bakelite

fuse units

63A Bakelite fuse units

100A Bakelite fuse units

L & T 50.00 100.00 200.00 70.00 120.00 150.00 375.00G. E 50.00 100.00 200.00 70.00 120.00 150.00 375.00C & S 50.00 100.00 200.00 70.00 120.00 150.00 375.00Havells 50.00 100.00 200.00 70.00 120.00 150.00 375.00H. P. L 50.00 100.00 200.00 70.00 120.00 150.00 375.00Standard 50.00 100.00 200.00 70.00 120.00 150.00 375.00Crystal 50.00 100.00 200.00 70.00 120.00 150.00 375.00Sputnik 50.00 100.00 200.00 70.00 120.00 150.00 375.00Style Lamp

50.00 100.00 200.00 70.00 120.00 150.00 375.00

V. EarthingThe rates for earthing are covered in Miscellaneous item no. XIX and balance items as per Civil SSR

VI. Service Mains & L. T. O. H Lines(RATE PER 100 MTRS)S.No

Description Gold Medal

Million Payal Power Flex Miltec

220 2.5 Sq.mm WPSC (3/20) 505 --- --- --- ---221 6 Sq.mm WPSC (7/18) 1,110 960 1,110 --- ---222 10 Sq.mm WPSC --- --- 1,240 --- ---223 16 Sq.mm WPSC 2,061 1,892 --- --- ---224 6 Sq.mm WPTC 2,188 2,005 2,188 --- ---225 10 Sq.mm WPTC --- --- 3,017 --- ---226 2 Pair Telephone wire 925 860 925 --- ---227 6 Pair Telephone wire 2,826 2,636 2,826 --- ---

101


228 Co-axial cable RG-06 1,543 733 1,543 --- ---229 23/0060 Twin core flat wire 677 605 --- --- ---230 3 core 1.5 Sqmm submersible

cable4,545 4,305 4,612 6,667 4,996

231 3 core 2.5 Sqmm submersible cable

6,993 6,681 7,087 10,380 7,550

232 3 core 4 Sq.mm submersible cable.

10,529 10,230 10,687 16,140 11,723

233 3 core 6.0 Sqmm submersible cable

14,760 15,345 16,537 24,386 16,325

234 3 core 10 Sqmm submersible cable

24,277 --- 26,550 --- ---

235 Lan cable (Cat-5) 1,903 --- --- --- ---

VII. Flourescent, HPSV, M. H Street lights, Post Top, Well glass & Flood Light LuminariesSTREET LIGHTS, M.V., S.V. AND MH LUMINARIES Rate per Each

Sl.No. 236 237 238 239 240 241 242Description 1X40W

STl2 x 11w

CFL (STL)1 x 18w

CFL (STL)80W MV luminarie

125W MV Luminaries

70W SV Luminaries

150W SV Luminaries

G. E 1,294.00 --- --- --- 2,475.00 2,784.00 4,106.00Wipro 1,250.00 --- --- 2,400.00 2,475.00 2,784.00 4,106.00Photon 1,316.00 1,249.00 1,125.00 2,756.00 2,778.00 3,521.00 4,545.00Havells 1,406.00 2,278.00 1,125.00 --- 3,482.00 3,931.00 4,179.00Phillips 1,473.00 2,261.00 --- --- 2,880.00 3,251.00 6,547.00C. G 1,470.00 2,256.00 --- --- 2,875.00 3,240.00 6,530.00Bajaj 1,316.00 1,249.00 1,125.00 2,756.00 2,778.00 3,521.00 4,545.00R. K 1,031.00 1,147.00 1,147.00 1,924.00 2,025.00 2,295.00 3,375.00Krishlite 1,031.00 1,147.00 1,147.00 1,924.00 2,025.00 2,295.00 3,375.00Fixolite 1,031.00 1,147.00 1,147.00 1,924.00 2,025.00 2,295.00 3,375.00Kumar 1,031.00 1,147.00 1,147.00 1,924.00 2,025.00 2,295.00 3,375.00Kushima Luminars

1,031.00 1,147.00 1,147.00 1,924.00 2,025.00 2,295.00 3,375.00

Indo Asian 1,031.00 1,147.00 1,147.00 1,924.00 2,025.00 2,295.00 3,375.00Flouracraft 1,031.00 1,147.00 1,147.00 1,924.00 2,025.00 2,295.00 3,375.00Style Lamp

1,031.00 1,147.00 1,147.00 1,924.00 2,025.00 2,295.00 3,375.00

Sl.No. 243 244 245 246 247 248 249Description 250W SV

Luminaries250W SV IP 65/55

70W MH Luminarie

150W MH Luminarie

250W MH Luminarie

250W MH IP 65/66

Luminarie

2x400W MH Flood light reflector with control gear (High mast) including cost of 2 Nos Lamp

G. E 4,455.00 5,366.00 --- --- 6,018.00 --- 13,275.00Wipro 4,455.00 5,366.00 --- --- 6,018.00 --- 13,275.00Photon 5,703.00 6,266.00 3,223.00 4,545.00 5,703.00 6,266.00 15,862.00Havells 4,725.00 6,131.00 3,988.00 5,670.00 6,469.00 7,200.00 15,637.00Phillips 6,941.00 7,852.00 --- --- --- 7,582.00 15,918.00C. G 6,920.00 7,841.00 --- --- --- 7,522.00 15,840.00Bajaj 5,703.00 6,266.00 3,223.00 4,545.00 5,703.00 6,266.00 15,862.00R. K 3,807.00 --- 2,970.00 4,590.00 5,265.00 --- 11,880.00

102


Krishlite 3,807.00 --- 2,970.00 4,590.00 5,265.00 --- 11,880.00Fixolite 3,807.00 --- 2,970.00 4,590.00 5,265.00 --- 11,880.00Kumar 3,807.00 --- 2,970.00 4,590.00 5,265.00 --- 11,880.00Kushima Luminars

3,807.00 --- 2,970.00 4,590.00 5,265.00 --- 11,880.00

Indo Asian 3,807.00 --- 2,970.00 4,590.00 5,265.00 --- 11,880.00Flouracraft 3,807.00 --- 2,970.00 4,590.00 5,265.00 --- 11,880.00Style Lamp

3,807.00 --- 2,970.00 4,590.00 5,265.00 --- 11,880.00

Well Glass and Low Bay Luminaries Rate per EachSl.No. 250 251Description 80W MV well

glass luminaries

70W SV well glass

luminaries

G. E --- 2,520.00Wipro 2,385.00 2,430.00Havells --- 2,694.00Phillips 2,385.00 2,430.00C. G 2,160.00 2,362.00Bajaj 2,160.00 2,362.00R. K 2,025.00 2,463.00Krishlite 2,025.00 2,463.00Fixolite 2,025.00 2,463.00Kumar 2,025.00 2,463.00Kushima Luminars 2,025.00 2,463.00Indo Asian 2,025.00 2,463.00Flouracraft 2,025.00 2,463.00

Post top Lantern Rate per EachSl.No. 252 253 254 255 256 257 258Description 1 X 11W

post Top CFL

Luminaries

80w MV standard post top lantern

luminaries

125w MV standard post top lantern

luminaries

70w SV standard post top lantern

luminaries

80w MV Sphear / Diamond post Top

luminaries

125w MV Sphear /

Diamond post Top luminaries

70w SV Sphear / Diamond post Top luminaries

G. E --- --- --- --- --- --- ---Wipro --- --- --- --- 2,947.00 2,947.00 3,172.00Havells --- --- --- --- --- --- ---Phillips --- --- --- --- 2,947.00 3,228.00 3,319.00C. G 3,544.00 1,946.00 2,014.00 2,205.00 2,947.00 2,947.00 3,172.00Bajaj 3,544.00 1,946.00 2,014.00 2,205.00 2,947.00 2,947.00 3,172.00Photon 3,544.00 1,946.00 2,014.00 2,205.00 2,947.00 2,947.00 3,172.00R. K --- 1,856.00 1,957.00 227.00 2,160.00 2,261.00 2,430.00Krishlite --- 1,856.00 1,957.00 227.00 2,160.00 2,261.00 2,430.00Fixolite --- 1,856.00 1,957.00 227.00 2,160.00 2,261.00 2,430.00Kumar --- 1,856.00 1,957.00 227.00 2,160.00 2,261.00 2,430.00

103


Kushima Luminars

--- 1,856.00 1,957.00 227.00 2,160.00 2,261.00 2,430.00

Indo Asian --- 1,856.00 1,957.00 227.00 2,160.00 2,261.00 2,430.00Flouracraft --- 1,856.00 1,957.00 227.00 2,160.00 2,261.00 2,430.00

Sl.No. 259 260 261 262 263 264Description Sonora

Post top 70 W Mh

Bollards N. G. C. 100 type GLS

60 W

Bollards F. G. C.

100/109 1 x 9 W

Bollards F. G. C.

100/109 1 x 18 W

Bollards Wall Mount 1 x 18

W

Bollards 1 x 70 W Sodium

G. E --- 3,049.00 3,229.00 4,298.00 2,486.00 7,380.00Wipro --- 3,049.00 3,229.00 4,298.00 2,486.00 7,380.00

Havells --- --- --- --- --- ---Phillips 6,176.00 3,049.00 3,229.00 4,298.00 2,486.00 7,380.00

C. G --- 3,049.00 3,229.00 4,298.00 2,486.00 7,380.00Bajaj --- 3,049.00 3,229.00 4,298.00 2,486.00 7,380.00

Photon --- 3,049.00 3,229.00 4,298.00 2,486.00 7,380.00

Hallogen / M. H Flood Light Rate per Each

Sl.No. 265 266 267 268Description 500W

Hallozen Luminaries

IP-54

1000w Hallozen

Luminaries IP-54

250w MH Luminaries

400w MH Luminaries

G. E 798.00 1,631.00 6,446.00 6,975.00Wipro 798.00 1,631.00 6,446.00 6,975.00

Havells 562.00 1,350.00 5,850.00 6,468.00Phillips 945.00 1,901.00 7,290.00 7,548.00

C. G 945.00 1,687.00 6,108.00 6,705.00Bajaj 844.00 1,687.00 6,108.00 6,705.00

Photon 844.00 1,687.00 6,108.00 6,705.00R. K 742.00 945.00 5,940.00 6,480.00

Krishlite 742.00 945.00 5,940.00 6,480.00Fixolite 742.00 945.00 5,940.00 6,480.00Kumar 742.00 945.00 5,940.00 6,480.00Kushima Luminars 742.00 945.00 5,940.00 6,480.00

Indo Asian 742.00 945.00 5,940.00 6,480.00Flouracraft 742.00 945.00 5,940.00 6,480.00Style Lamp 742.00 945.00 5,940.00 6,480.00

Energy Saving Led Light Fitting Rate per EachSl.No. 269 270 271 272 273

Description 15 Watts Led light

fitting (equavalent to 54 w)

22 Watts led street light

fittings (equavalent

to 90 W)

30 Watts led street

light fittings (equavalent to 180 W)

42 Watts led street light

fittings (equavalent to

280 W)

60 Watts led street light fittings (equavalent to 440 W)

Kushima Luminars 2,912.00 8,320.00 10,400.00 14,560.00 20,800.00

Accessories to Street lights Rate per Each

104


Sl.No. 274 275 276 277 278 279 280Description 80W M.V.

Copper Ballast

125W M.V. Copper Ballast

250W M.V. Copper Ballast

70W S.V. / M.H Copper

Ballast


Ballast


Ballast

400W S.V. / M.H Copper Ballast

Phillips 570.00 630.00 930.00 720.00 1,090.00 1,370.00 1,900.00Bajaj 570.00 630.00 930.00 720.00 1,090.00 1,370.00 1,900.00Crompton 570.00 630.00 930.00 720.00 1,090.00 1,370.00 1,900.00Havells 570.00 630.00 930.00 720.00 1,090.00 1,370.00 1,900.00G. E 570.00 630.00 930.00 720.00 1,090.00 1,370.00 1,900.00Wipro 570.00 630.00 930.00 720.00 1,090.00 1,370.00 1,900.00R. K. 550.00 570.00 850.00 580.00 851.00 1,328.00 1,900.00Krishlite 550.00 570.00 850.00 580.00 851.00 1,328.00 1,900.00Kushima luminaries

550.00 570.00 850.00 580.00 851.00 1,328.00 1,900.00

Fixolite 550.00 570.00 850.00 580.00 851.00 1,328.00 1,900.00Kumar 550.00 570.00 850.00 580.00 851.00 1,328.00 1,900.00Indo Asian 550.00 570.00 850.00 580.00 851.00 1,328.00 1,900.00Florocraft 550.00 570.00 850.00 580.00 851.00 1,328.00 1,900.00Photon 550.00 570.00 850.00 580.00 851.00 1,328.00 1,900.00Style Lamp

550.00 570.00 850.00 580.00 851.00 1,328.00 1,900.00

Sl.No. 281 282 283 284 285 286 287Description Ignitor for

S.V / M.H Lamp

HPF Capacitor

4 mfd

HPF Capacitor

10 mfd

HPF Capacitor 15

mfd

HPF Capacitor

20 mfd

HPF Capacitor 33 mfd

HPF Capacitor 42 mfd

Phillips 292.00 107.00 180.00 225.00 298.00 506.00 562.00Bajaj 292.00 107.00 180.00 225.00 298.00 506.00 562.00Crompton 292.00 107.00 180.00 225.00 298.00 506.00 562.00Havells 292.00 107.00 180.00 225.00 298.00 506.00 562.00G. E 292.00 107.00 180.00 225.00 298.00 506.00 562.00Wipro 292.00 107.00 180.00 225.00 298.00 506.00 562.00R. K. 150.00 80.00 120.00 165.00 225.00 400.00 420.00Krishlite 150.00 80.00 120.00 165.00 225.00 400.00 420.00Kushima luminaries

150.00 80.00 120.00 165.00 225.00 400.00 420.00

Fixolite 150.00 80.00 120.00 165.00 225.00 400.00 420.00Kumar 150.00 80.00 120.00 165.00 225.00 400.00 420.00Indo Asian 150.00 80.00 120.00 165.00 225.00 400.00 420.00Florocraft 150.00 80.00 120.00 165.00 225.00 400.00 420.00Photon 150.00 80.00 120.00 165.00 225.00 400.00 420.00Style Lamp

150.00 80.00 120.00 165.00 225.00 400.00 420.00

Sl.No. 288 289 290 291 292 293 294Description 500W

Halogen Lamp

1000W Halogen

Lamp

70W S.V Lamp

150W S.V Lamp

250W S.V Lamp

400W S.V Lamp

70W double end M.H Lamp

Phillips 99.00 120.00 450.00 650.00 700.00 780.00 550.00Bajaj 99.00 120.00 450.00 650.00 700.00 780.00 550.00Crompton 99.00 120.00 450.00 650.00 700.00 780.00 550.00Style Lamp

99.00 120.00 450.00 650.00 700.00 780.00 550.00

105


Sl.No. 295 296 297 298 299 300 301

Description150W

double end M.H Lamp

70W M.H Lamp

150W M.H Lamp

250W M.H Lamp

400W M.H Lamp

80W M.V Lamp

125W M.V Lamp

Phillips 550.00 830.00 900.00 1,230.00 1,400.00 163.00 170.00Bajaj 550.00 830.00 900.00 1,230.00 1,400.00 163.00 170.00Crompton 550.00 830.00 900.00 1,230.00 1,400.00 163.00 170.00Style Lamp

550.00 830.00 900.00 1,230.00 1,400.00 163.00 170.00

Sl.No. 302 303 304 305 306

Description250W M.V

Lamp400W M.V

LampMLL 160W

Lamp

2X250 MH Non-integral

flood light luminaries with control

gear, without lamp (for high

mast)

2X400 MH Non-integral

flood light luminaries with control gear without lamps (For High mast).

Phillips 415.00 585.00 218.00 15,041.00 15,814.00Bajaj 415.00 585.00 218.00 15,041.00 15,814.00Crompton 415.00 585.00 218.00 15,041.00 15,814.00Havells --- --- --- 15,041.00 15,814.00G. E --- --- --- 15,041.00 15,814.00Wipro --- --- --- 15,041.00 15,814.00R. K. --- --- --- 11,070.00 11,880.00Krishlite --- --- --- 11,070.00 11,880.00Kushima luminaries --- --- --- 11,070.00 11,880.00Fixolite --- --- --- 11,070.00 11,880.00Kumar --- --- --- 11,070.00 11,880.00Indo Asian --- --- --- 11,070.00 11,880.00Florocraft --- --- --- 11,070.00 11,880.00Photon --- --- --- 11,070.00 11,880.00Style Lamp 415.00 585.00 218.00 11,070.00 11,880.00

Supply of Swadeep Nature switchs.(Rate per Each)

Kakatiya Energy Saving System

307 Swadeep - 01 Independent Model 2,517.00308 Swadeep - 02 Independent Model 2,974.00309 Sign switch 3,318.00310 Swadeep - 02 EC 5KW 1 Ph. 9,724.00311 Swadeep - 02 EC 8KW 1 Ph. 10,868.00312 Swadeep - 02 EC 5KW 3 Ph. 10,754.00313 Swadeep - 02 EC 8KW 3 Ph. 12,470.00314 Swadeep - 02 EC 12KW 3 Ph. 13,842.00

315 Supply of single fancy bracket with glass shade best Indian make 195.00316 Supply of double fancy bracket with glass shade best Indian make 350.00317 Supply of 10" ceiling fittings with glass doom best Indian make 175.00318 Supply of Bulk head fitting with cast aluminium enamel painted body with water

tight, clear glass with wire guard hinged with lock and key arrangements etc., complete best Indian make

360.00

VIII. Internal Luminaries, Mirror Optic, T - 5 CFL Down Lihgts etc., Rate per eachSl.No. 319 320 321 322 323 324 325

106


Description Supply of 1x11W

mirror light with all

standard accessories diffuser

Supply of 1x36/40W box type tube light luminaries

with copper /

VPIT Choke,

Condenser, starters.

Supply of 2x36/40W box type tube light luminaries with 2Nos copper /

VPIT chokes, starters,

Condenser

Supply of 1x40W patty

type tube light

luminaries with copper

choke, starter etc.

Supply of 1x20W

patty type tube light luminaries

with copper choke,

starter etc.

Supply of 1x36 / 40W

industrial box type luminaries with Copper / VPIT Choke, Condenser,

Starters.

Supply of 2x36 / 40W industrial box type luminaries with 2Nos Copper / VPIT Choke, Condenser, Starters with reflector

Phillips 585.00 600.00 978.00 320.00 --- 1,310.00 1,630.00Bajaj 585.00 600.00 978.00 320.00 --- 1,310.00 1,630.00Crompton 585.00 600.00 978.00 320.00 --- 1,310.00 1,630.00Havells 585.00 600.00 978.00 320.00 --- 1,310.00 1,630.00G. E 585.00 600.00 978.00 320.00 --- 1,310.00 1,630.00Wipro 585.00 600.00 978.00 320.00 --- 1,310.00 1,630.00Phuton ISI 585.00 600.00 978.00 320.00 --- 1,310.00 1,630.00R. K. 470.00 495.00 735.00 292.00 292.00 928.00 1,295.00Krishlite 470.00 495.00 735.00 292.00 292.00 928.00 1,295.00Kushima luminaries

470.00 495.00 735.00 292.00 292.00 928.00 1,295.00

Fixolite 470.00 495.00 735.00 292.00 292.00 928.00 1,295.00Kumar 470.00 495.00 735.00 292.00 292.00 928.00 1,295.00Indo Asian 470.00 495.00 735.00 292.00 292.00 928.00 1,295.00Florocraft 470.00 495.00 735.00 292.00 292.00 928.00 1,295.00Morson 495.00 735.00 292.00 292.00Style Lamp 495.00 735.00 292.00 292.00 928.00 1,295.00Sl.No. 326 327 328 329 330 331 332Description 2x36 /

40W surface

mounting mirror optic

luminaries with

powder coated CRCA

sheet steel housing

with aluminium

mirror reflectors with VPIT chokes, Starters,

Condenser etc.

2x36/40W recessed mounting

mirror optic

(darklite) luminaries

with powder coated CRCA

sheet steel housing

with aluminium

mirror reflector

with VPIT Chokes, Starter,

Condenser etc.

2x11W surface

mounting mirror optic

luminaries with

powder coated CRCA

sheet steel housing

with aluminium

mirror reflector

with VPIT Chokes

2x11W Recessed

type luminaries

with powder coated

CRCA sheet steel

housing with aluminium

mirror reflector with

VPIT Chokes.

2x36W CFL paralite

louvre (P5) surface low glare mirror

optic luminaries comprising

bright anodised aluminium reflector

with VPIT Chokes.

2x36W CFL paralite louvre (P5) recessed

low glare mirror optic luminaries comprising

bright anodised aluminium

reflector with VPIT Chokes

1X28W surface pendant mounting T- 5 extruded aluminium with aluminium reflector luminaries with all standard accessories and connections etc.,

Phillips 2,530.00 3,060.00 1,350.00 1,350.00 4,500.00 4,500.00 1,726.00Bajaj 2,530.00 3,060.00 1,350.00 1,350.00 4,500.00 4,500.00 1,726.00

Crompton 2,530.00 3,060.00 1,350.00 1,350.00 4,500.00 4,500.00 1,726.00Havells 2,530.00 3,060.00 1,350.00 1,350.00 4,500.00 4,500.00 1,726.00

G. E 2,530.00 3,060.00 1,350.00 1,350.00 4,500.00 4,500.00 1,726.00Wipro 2,530.00 3,060.00 1,350.00 1,350.00 4,500.00 4,500.00 1,726.00

Phuton ISI 2,530.00 3,060.00 1,350.00 1,350.00 4,500.00 4,500.00 1,726.00R. K. 1,710.00 1,710.00 985.00 985.00 --- --- ---

107


Krishlite 1,710.00 1,710.00 985.00 985.00 --- --- ---Kushima

luminaries1,710.00 1,710.00 985.00 985.00 --- --- ---

Fixolite 1,710.00 1,710.00 985.00 985.00 --- --- ---Kumar 1,710.00 1,710.00 985.00 985.00 --- --- ---

Indo Asian 1,710.00 1,710.00 985.00 985.00 --- --- ---Florocraft 1,710.00 1,710.00 985.00 985.00 --- --- ---

Style Lamp

1,710.00 1,710.00 --- --- ---

Sl.No. 333 334 335 336 337 338 339Description 2X28W

recessed pendant mounting low glare

T- 5 mirror optic

luminaries with

electronic Ballasts

etc.,

Recessed mounting 1x13W

CFL down light with

all standard

accessories.

Recessed mounting 2x13W

CFL down light with

all standard

accessories.

Recessed mounting

1x18W CFL down light

with all standard

accessories.

Recessed mounting

2x18W CFL down light

with all standard

accessories.

Recess mounting 70W metal hallide

down light with control gear.

Ceiling / Wall mounted Circular 1x13W luminaries with decorative acrylic diffuser and 1 No. 13W CFL lamp (circular type) etc., complete.

Phillips 5,456.00 844.00 1,069.00 1,069.00 1,462.00 2,475.00 ---Bajaj 5,456.00 844.00 1,069.00 1,069.00 1,462.00 2,475.00 ---

Crompton 5,456.00 844.00 1,069.00 1,069.00 1,462.00 2,475.00 ---Havells 5,456.00 844.00 1,069.00 1,069.00 1,462.00 2,475.00 ---

G. E 5,456.00 844.00 1,069.00 1,069.00 1,462.00 2,475.00 ---Wipro 5,456.00 844.00 1,069.00 1,069.00 1,462.00 2,475.00 1,951.00

Photon 5,456.00 844.00 1,069.00 1,069.00 1,462.00 2,475.00 ---

Sl.No. 340 341 342 343 344 345 346Description Ceiling /

Wall mounted Circular 2x13W

luminaries with

decorative acrylic diffuser

and 2 No. 13W CFL

lamp (circular

type) etc., complete.

Recess mounting 12v, 50w

adjustable halogen

down light with white /

colour / Gold

Shade including

transformer

Recess mounting 12v, 50w

Zoom type halogen

down light with white /

colour Shade

including transforme

r.

VPIT 9/13w Ballast for

CFL

VPIT 18w Ballast for

CFL

20w copper wound Ballast

40w copper wound Ballast

Phillips --- 675.00 890.00 159.00 163.00 200.00 200.00Bajaj --- 675.00 890.00 159.00 163.00 200.00 200.00Crompton --- 675.00 890.00 159.00 163.00 200.00 200.00Havells --- 675.00 890.00 159.00 163.00 200.00 200.00G. E --- 675.00 890.00 159.00 163.00 200.00 200.00Wipro 2,300.00 675.00 890.00 159.00 163.00 200.00 200.00

108


Photon --- 675.00 890.00 159.00 163.00 200.00 200.00R. K. --- --- --- 124.00 124.00 200.00 200.00Krishlite --- --- --- 124.00 124.00 200.00 200.00Kushima luminaries

--- --- --- 124.00 124.00 200.00 200.00

Fixolite --- --- --- 124.00 124.00 200.00 200.00Kumar --- --- --- 124.00 124.00 200.00 200.00Indo Asian --- --- --- 124.00 124.00 200.00 200.00Florocraft --- --- --- 124.00 124.00 200.00 200.00Morson --- --- --- --- --- 200.00 200.00Style Lamp

--- --- --- --- --- 200.00 200.00

Sl.No. 347 348 349 350 351 352 353Description VPIT

18/20w Ballast

VPIT 36/40w Ballast

40w Starter.

20w allum. Wound ballast

40w allum. Wound ballast

Rotor holder (FTL)

HID Lamp holder

Phillips 196.00 196.00 11.00 135.00 135.00 20.00 60.00Bajaj 196.00 196.00 11.00 135.00 135.00 20.00 60.00Crompton 196.00 196.00 11.00 135.00 135.00 20.00 60.00Havells 196.00 196.00 11.00 135.00 135.00 20.00 60.00G. E 196.00 196.00 11.00 135.00 135.00 20.00 60.00Wipro 196.00 196.00 11.00 135.00 135.00 20.00 60.00Photon 196.00 196.00 11.00 135.00 135.00 --- ---R. K. 181.00 181.00 7.00 106.00 106.00 6.00 40.00Krishlite 181.00 181.00 7.00 106.00 106.00 6.00 40.00Kushima luminaries

181.00 181.00 7.00 106.00 106.00 6.00 40.00

Fixolite 181.00 181.00 7.00 106.00 106.00 6.00 40.00Kumar 181.00 181.00 7.00 106.00 106.00 6.00 40.00Indo Asian 181.00 181.00 7.00 106.00 106.00 6.00 40.00Florocraft 181.00 181.00 7.00 106.00 106.00 6.00 40.00Morson 181.00 181.00 7.00 106.00 106.00 6.00 40.00Style Lamp

181.00 181.00 7.00 106.00 106.00 6.00 40.00

Sl.No. 354 355 356Description CFL

HolderFTL Starter

Holder Electronic ballast for 36w FTL

Phillips 30.00 12.00 551.00Bajaj 30.00 12.00 551.00Crompton 30.00 12.00 551.00Havells 30.00 12.00 551.00G. E 30.00 12.00 551.00Wipro 30.00 12.00 551.00Photon --- --- 551.00R. K. 21.00 8.00 425.00Krishlite 21.00 8.00 425.00Kushima luminaries 21.00 8.00 425.00Fixolite 21.00 8.00 425.00Kumar 21.00 8.00 425.00Indo Asian 21.00 8.00 425.00Florocraft 21.00 8.00 425.00

109


Morson 21.00 6.00 ---

Sl.No. 357 358 359 360 361 362 363Description 40-60w

Lamp100w lamp 40-60w

Milky lampNight Lamp 18 / 20w

Flourescent Lamp

36 / 40w Flourescent

Lamp

9w CFL

Phillips 11.00 12.00 13.00 11.00 43.00 46.00 75.00Bajaj 11.00 12.00 13.00 11.00 43.00 46.00 75.00Crompton 11.00 12.00 13.00 11.00 43.00 46.00 75.00Havells 11.00 12.00 13.00 11.00 43.00 46.00 75.00G. E 11.00 12.00 13.00 11.00 43.00 46.00 75.00Wipro 11.00 12.00 13.00 11.00 43.00 46.00 75.00Style Lamp

11.00 12.00 13.00 11.00 43.00 46.00

Sl.No. 364 365 366 367 368 369 370Description 11w CFL 13w CFL 18w CFL 26w CFL 36w CFL 5w-7w CFL

with B-22 Caps best Indian

make

9w CFL with B-22 Caps best Indian make

Phillips 80.00 108.00 165.00 150.00 180.00 125.00 130.00Bajaj 80.00 108.00 165.00 150.00 180.00 125.00 ---Crompton 80.00 108.00 165.00 150.00 180.00 125.00 ---Havells 80.00 108.00 165.00 150.00 180.00 125.00 ---G. E 80.00 108.00 165.00 150.00 180.00 125.00 ---Wipro 80.00 108.00 165.00 150.00 180.00 125.00 ---

Sl.No. 371 372 373 374 375 376 377Description 11w CFL

with B-22 Caps best

Indian make

Under water

luminaries

4 x 18 w Recess

mounting C5

luminair

2 x 18 w Recess

mounting P5 luminair

2 x 36 w Recess

mounting P5 E. B. W

luminair

3 x 36 w Recess

mounting P5 E. B. W luminair

4 x 36 w Recess mounting D6 luminair

Phillips 140.00 4,646.00 4,354.00 3,375.00 5,220.00 6,131.00 7,728.00

Sl.No. 378 379 380Description 2 x 36 w

Recess mounting

P5 luminair

4 x 14 w Recess

mounting FNS D6 MMHF luminair

2 x 55w Recess mounting FNS D6 MMHF luminair

Phillips 4,207.00 6,435.00 7,008.00

S.No. Trinik Make(Rate per Each) For the makes Phillips /Crompton/Havells/Bajaj etc., Prevailing market rates may be adopted as on 29-01-2007.

381 1x28W energy conserving Electronic ordinary patty type powder coated. Flourescent fitting with 28W electronic ballast of P+ 0.90.

925.00

382 --do-- Box type --do-- 1,050.00383 --do-- Industrial Box type --do-- 2,000.00384 --do- surface mounted Mirror optic --do--

(suitable for 1x36 / 40w)2,100.00

385 --do- surface mounted Mirror optic --do-- (suitable for 2x36 / 40w)

2,850.00

110


386 --do-- recess mounted Mirror optic (suitable for 1x36 / 40W) 3,000.00387 --do-- recess mounted mirror optic (Suitable for 2 x36 / 40w) 3,500.00

C. F. L Rate per EachS.No. Description G. E Standard Phillips Bajaj388 Retrofit Tiny CFL upto 5 W 110.00 112.00 150.00 ---389 Retrofit Tiny CFL upto 8 W 125.00 125.00 140.00 ---390 Retrofit Tiny CFL upto 10/11 W 130.00 135.00 160.00 ---391 Retrofit Tiny CFL upto 13/14 W --- 145.00 145.00 ---392 Retrofit CFL upto 15 W 145.00 210.00 170.00 ---393 Retrofit CFL upto 18/20 W 170.00 225.00 155.00 ---394 Retrofit Tiny CFL upto 23 W 200.00 240.00 --- ---395 Retrofit Tiny CFL upto 25/26 W 230.00 399.00 200.00 ---396 Non Retrofit CFL upto 5 W 65.00 --- --- ---397 Non Retrofit CFL upto 7 W 70.00 --- 95.00 ---398 Non Retrofit CFL upto 9 W 75.00 75.00 95.00 100.00399 Non Retrofit CFL upto 11 W 80.00 80.00 100.00 105.00400 Non Retrofit CFL upto 10/13 W 115.00 108.00 --- 130.00401 Non Retrofit CFL upto 18 W 125.00 112.00 --- 160.00

IX. Air Conditioning, Refrigeration, Stablizers, Fans and Exhaust Fans Rate per eachRepairs to Air Conditioners Rate per Each

402 Supply, Fabrication of well seasoned T.W frame of size 27" x 19" (with 3"x4" size TW) for 1.0 / 1.5 / 2.0 Ton Window A.C.Unit.

925.00

403 Copper tubing between indoor and outdoor unit for split Air-Conditioner including foaming etc., complete.

170/R. M

404 Supply of 1.0 / 1.5 Ton brand new sealed compressor. 8,150.00

405 Supply of 2.0 Ton brand new sealed compressor. 9,250.00

406 1/6th H.P multi speed Fan Motor suitable for 1.0 / 1.5 / 2.0 Ton Window A.C.Unit. 600.00

407 Fan motor capacitor 6 mfd by new capacitor for A.C machine of 1.0 1.5 / Ton Capacity.

156.00

408 Thermostat switch suitable for 1.0 / 1.5 / 2.0 Ton A.C.Unit. 410.00

409 Starting capacitor of 80 to 120 mfd. by new approved make capacitor suitable for compressor motor of 1.0 / 1.5 Ton A.C. Unit.

180.00

410 Running capacitor of 36 mfd by new approved make capacitor suitable for compressor motor of 1.0 / 1.5 Ton A.C.Unit.

220.00

411 Relay by approved make having pickup voltage 220 Volts and dropout voltage 120 Volts suitable for 1.0 / 1.50 Ton A.C. Unit.

225.00

412 Filter and capillary tube including welding etc., complete for 1.0 / 1.5 / 2.0 Ton A.C.Unit.

485.00

413 Air filter suitable for 1.50 Ton Window A.C.Unit P.V.C. / NYLON. 225.00

414 Air filter suitable for 1.50 Ton Split A.C.Unit P.V.C. / NYLON. 475.00

415 Rewiring the entire Window type 1.50 Ton A.C.unit with 2.5 Sq.mm Flexible copper cable and putting the same in working conditions.

325.00

416 Overhauling and servicing the Window type 1.0 / 1.5 Ton A.C. Machine by Cleaning the Condenser cooling Coil etc., by blower and oiling the Fan Motor and Cleaning all parts and putting the machine in working condition.

350.00

417 Fan blade for 1.0 / 1.5 Ton A.C.Machine. 160.00

418 Grill of 1.0 / 1.5 ton A.C. Machine (for assembled Units). 427.00

419 Grill of 1.0 / 1.5 ton A.C. Machine of branded units. 1,700.00

420 Rotary / Selector switch by new one. 115.00

111


421 Flushing the line, leak testing, leak stopping, vaccumming, dehydrating and charging the gas in the refrigeration system for 1.0/ 1.5 /2.0 Ton Window A.C.Unit.

1,500.00

422 Flushing the line, leak testing, leak stopping, vaccumming, dehydrating and charging the gas in the refrigeration system for 1.5 /2.0 Ton Split A.C.Unit.

2,100.00

423 Spray painting of Refrigerator using good quality paint after scraping the surface etc.

720.00

424 New sealed compressor of 1/8 HP suitable for 165 to 185 Ltrs. Capacity Refrigerator.

3,100.00

425 Sealed compressor of 1/6 HP suitable for 285 / 310 Ltrs. Capacity Refrigerator. 3,750.00

426 Supply of fan motor by new 1/10 t0 1/12 H.P 1250 RPM fan motor for Water Cooler of 80-150 Ltrs.

1,590.00

427 Bush for fan motor of 80-150 Lts. 125.00

428 Fan hook of 12/15mm dia M.S. rod / bar 20.00

429 19/20mm steel tube down rod of 1 meter length. 60.00

430 Resistance type regulator for ceiling fans 900/1200/1400mm sweep complete erected on existing board.

40.00

Note: Techonology is fast changing which is reflecting on the specifications and price structure. Hence the A. C units etc., not incorporated in the rate analysis. However, the rate analysis as per the prevailing market rate may be considered in the approved data while working out finished item of rate.

Stablizers Rate per EachDescription V-Gaurd Capri Real Guard UNI- STAB ITL KEELINE

431 0.5 KVA Stabilizer 950 950 950 1345 950 1080432 1 KVA Stabilizer 1775 1775 1775 1595 1775 1700433 3 KVA Stabilizer 2300 2300 2300 --- 2300 3500434 4 KVA Stabilizer 3100 3100 3100 3045 3100 3800435 5 KVA Stabilizer 4100 4100 4100 3185 4100 4000

Fans and Exhaust Fans Rate per Each

436 36" (900mm) Sweep Ceiling FanCrompton Bajaj Havells

2 3 4High Speed

1460.00 Ultima 1350.00 Velocity 1406.00

Decora 1640.00 G Gold 1500.00 Fusion Mt. 1676.00Reviera 1360.00 R Gold 1560.00 Candy 2272.00


2 3 4High Speed

1470.00 Ultima 1350.00 Velocity 1440.00



2 3 4High Speed

1575.00 Ultima 1445.00 Velocity 1541.00


439 16" (400mm ) (Wall mounted)Crompton Bajaj Havells

2 3 4

112


Gold 1960.00 Media BW05

1745.00 Swing 1716.00

Elegance 1695.00 Premia Gold

1885.00

Grace 1575.00440 16" (400mm) Pedestal Fan

Crompton Bajaj Havells2 3 4

SDX 2365.00 Media BP 5

1965.00 Mobile 1963.00

MPF-G 2285.00 Media IOA 11

2175.00 Mobile With Remote

2464.00

Classical 2065.00 Swift 2025.00

Description Crompton Bajaj Havells441 18" (450mm) Air circulators 4,420.00 --- ---442 24" (600mm) Air Circulators 5,150.00 --- ---443 12" (300mm ) (Cabin Fan) 1,225.00 1,225.00 1,225.00444 12" (300mm) (Fresh air Fans) 1,495.00 1,335.00 1,496.00445 9" (225mm) Fresh air Fans 1,365.00 1,225.00 1,360.00446 12" (300mm) H.D.Exhaust Fan 900 RPM 2,110.00 2,580.00 1,755.00447 15" (375mm) 900 RPM HD Exhaust Fan 2,520.00 3,050.00 2,209.00448 18" (450mm) HD Exhaust Fan 3,500.00 4,070.00 2,947.00

X. Water Heaters

Geysers & Instant Water Heaters Rate per EachDescription Venus Bajaj V- Guard Racold Usha

449 25 Lt Geyser (copper tank) Vertical

6,030.00 6,030.00 6,030.00 6,030.00 6,049.00


6,900.00 6,900.00 6,900.00 6,900.00 6,799.00


8,960.00 8,960.00 8,960.00 --- 8,099.00

452 Instant water heater 3 KW 1,757.00 1,620.00 1,800.00 2,460.00 1,795.00453 25 Lt Geyser (copper tank)

Vertical Plastic body

7,390.00 7,300.00 --- --- 6,799.00

Repairs to Geysers Rate per Each454 Heating element of 1.5 / 2.0 / 3.0 KW. 330.00455 Supply of thermostat with range 300 to 900C.Adjustable and suitable

for 25 to 50 Ltrs. Capacity.200.00

456 Supply of pressure release valve for water heater of 15 to 50 Ltrs.capacity. 200.00456 a Flexible Nylon / PVC Metallic hume pipe 110.00

XI. Water Pumps and AccessoriesNote: Techonology is fast changing which is reflecting on the specifications and price structure.

Hence not incorporated in the rate analysis. However, the rate analysis as per the prevailing market rate may be considered in the approved data while working out finished item of rate.

Accessories Rate per Each

113


457 D.O.L Starter 250V, Single phase, 50Hz. With SS enclouser comprising of contactor with bi-metalic relay with necessary push buttons, etc., complete .

780.00

458 D.O.L Starter 415V, 3 phase, 50Hz.. enclosed with no volt coil and overload protection with necessary materials, etc., complete suitable upto 7.5.HP.

1,450.00

459 Semi automatic star / delta starter suitable for 10 HP to 12.5 HP Induction Motor totally enclosed with over load protection and no volt relay etc., complete.

3,830.00

460 Semi automatic star / delta starter suitable for 15 HP to 25 HP Induction Motor totally enclosed with over load protection and no volt relay etc., complete.

4,595.00

461 Automatic star / delta starter suitable for 10 HP to 12.5 HP Induction Motor totally enclosed with over load protection and no volt relay etc., complete.

5,760.00

462 Erecting automatic star / delta starter suitable up to 15 HP Induction Motor totally enclosed with over load protection and no volt relay etc., complete.

6,097.00

463 Single phasing preventer connected to A.C. supply upto 45A range. 2,106.00464 Motor made from GI sheet of 18SWG for protection from rain complete. 45.00

XII. Bus Bars

The rates for bus bar etc are coverd in Miscellaneous under item no. XIX

XIII. Swaged Poles, Garden Posts & Accessories

465 Fabrication, supply and transportation of all sizes swaged poles up to site confirming to IS 2713 / 1980 specifications. The pole should be painted with primary coat of red oxide and black bituminous paint up to ground level with base plate, including cost of all materials etc., complete.(Rate per K. G)

55.00

466 Fabrication and Supply of M.S. Poles for garden posts with 'B' class 60.25mm outer dia with base plate and suitable pole cap including cost and conveyance of all material including fixing of luminaries and labour charges etc., complete. (Rate per K. G)

55.00

467 Supply of different sizes of M. S. Pipe brackets (Rate per K.G) 55.00

XIV. Control Panel & Metering Equipment

Fabrication and erection of following guage CRCA sheet steel enclosure for power control cubicle panel / boxes etc., including cutting, bending drilling, welding and reveting etc., complete with cleaning with 7 tank process and painting with powder coating including cost and conveyance of all materials and labour charges.(Rate per Sq. inch)

468 14 SWG CRCA sheet steel enclosure 2.00469 16 SWG CRCA sheet steel enclosure 1.80470 18 SWG CRCA sheet steel enclosure 1.50

Metering Equipment Rate per EachDescription Analog Digital

471 Supply and erection of 0-415V volt meter of size 96x96mm on exisiting box/panel board including connections etc., complete. (Conzen/AE/MECO/ HPL make)

450.00 2,500.00

472 Supply and erection of 0-100 / 200 / 400 / 600 /1000 - 5A CT Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. (Conzen/AE/MECO/ HPL make)

450.00 2,500.00

473 Supply and erection of frequency meter of size 96x96mm on existing bo /panel board including connections etc., complete. (Conzen/AE/MECO/ HPL make)

--- 4,556.00

474 Supply and erection of power factor meter, 3 phase, 4 wire balanced or unabalanced load 5A, 415V of size 96x96mm on existing box / panel board including connections etc., complete. (Conzen/AE/MECO/ HPL make)

--- 2,700.00

114


475 Supply and erection of L.T. 3phase multifunction energy meter with 3 lines LCD display of size 96x96mm for measuring all the parameters (voltage / Current / Power / frequency / power factor / kw / kwh / KVAR/ KVARH/) on existing box panel board including connections etc., complete.(HPL/Conzerv/AE makes)

10,023.00 ---

476 Supply and erection of selector switch for voltmeter / Ammeter on the existing box / panel including connections etc., complete. (HPL/Conzerv/AE makes)

175.00 ---

477 Supply and erection of LED indicator lamps on the existing box / panel board.(HPL/Conzerv/AE makes)

135.00 ---

478 Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing box / panel including connections etc., complete. (HPL/Conzerv/AE makes)

450.00 ---

479 Supply and fixing of single phase energy Meter,240V AC,50 HZ as per IS13010 with 2.5-5 /5-10/10-20 Amps range with 200% over load capacity complete with connections etc., complete on the existing board. (HPL/Conzerv/AE makes)

1,012.00 ---

480 Supply and fixing of three phase energy Meter, 415V AC,50 HZ as per IS13010 with 2.5-5 /5-10/10-20 Amps range with 200% over load capacity complete with connections etc., complete on the existing board. (HPL/Conzerv/AE makes)

3,037.00 ---

XV. U. G. Cables, Glands, Lugs Etc.,

XLPE Armoured 1100 V U.G. Cables Rate per MetreSl.No. 481 482 483 484 485 486 487

Description

XLPE PVC4 Sq. mm

2 core Armoured Allu. Cable

XLPE PVC 6 Sq. mm

2 core Armoured Allu. Cable

XLPE PVC 10 Sq. mm

2 core Armoured. Allu. Cable

XLPE PVC 4 Sq. mm 4

core Armoured Allu. Cable

XLPE PVC 6 Sq. mm 4


XLPE PVC 10 Sq. mm 4 core Armoured Allu.

Cable

XLPE PVC 16 Sq. mm 4


Torrent 110.50 125.20 153.20 140.00 173.40 186.50 234.20Polycab 110.50 125.20 153.20 140.00 173.40 186.50 234.20Universal 110.50 125.20 153.20 140.00 173.40 186.50 234.20Power Plast

110.50 125.20 153.20 140.00 173.40 186.50 234.20

Paragon 110.50 125.20 153.20 140.00 173.40 186.50 234.20Payal 110.50 125.20 153.20 140.00 173.40 186.50 234.20Finolex 110.50 125.20 153.20 140.00 173.40 186.50 234.20Surana 110.50 125.20 153.20 140.00 173.40 186.50 234.20Unicab 110.50 125.20 153.20 140.00 173.40 186.50 234.20Nicco 110.50 125.20 153.20 140.00 173.40 186.50 234.20Asian 110.50 125.20 153.20 140.00 173.40 186.50 234.20Suncab 110.50 125.20 153.20 140.00 173.40 186.50 234.20Alankar 110.50 125.20 153.20 140.00 173.40 186.50 234.20

Sl.No. 488 489 490 491 492 493 494Description XLPE PVC

25 Sq. mm 3.5 core

Armoured Allu. Cable

XLPE PVC 35 Sq. mm

3.5 core Armoured Allu. Cable

XLPE PVC 50 Sq. mm


XLPE PVC 70 Sq. mm


XLPE PVC 95 Sq. mm


XLPE PVC 120 Sq. mm

3.5 core Armoured Allu.

Cable

XLPE PVC 150 Sq. mm 3.5 core Armoured Allu. Cable

115


Torrent 296.10 348.60 460.90 603.50 796.00 982.00 1,163.00Polycab 296.10 348.60 460.90 603.50 796.00 982.00 1,163.00Universal 296.10 348.60 460.90 603.50 796.00 982.00 1,163.00Power Plast

296.10 348.60 460.90 603.50 796.00 982.00 1,163.00

Paragon 296.10 348.60 460.90 603.50 796.00 982.00 1,163.00Payal 296.10 348.60 460.90 603.50 796.00 982.00 1,163.00Finolex 296.10 348.60 460.90 603.50 796.00 982.00 1,163.00Surana 296.10 348.60 460.90 603.50 796.00 982.00 1,163.00Unicab 296.10 348.60 460.90 603.50 796.00 982.00 1,163.00Nicco 296.10 348.60 460.90 603.50 796.00 982.00 1,163.00Asian 296.10 348.60 460.90 603.50 796.00 982.00 1,163.00Suncab 296.10 348.60 460.90 603.50 796.00 982.00 1,163.00Alankar 296.10 348.60 460.90 603.50 796.00 982.00 1,163.00

Sl.No. 495 496 497 498Description XLPE PVC

185 Sq. mm 3.5 core Ar.

Allu. Cable

XLPE PVC 240 Sq. mm 3.5 core Ar.

Allu. Cable

XLPE PVC 300 Sq. mm 3.5 core Ar. Allu. Cable

XLPE PVC 400 Sq. mm 3.5 core Ar. Allu. Cable

Torrent 1,441.40 1,844.20 2,257.90 2,840.50Polycab 1,441.40 1,844.20 2,257.90 2,840.50Universal 1,441.40 1,844.20 2,257.90 2,840.50Power Plast 1,441.40 1,844.20 2,257.90 2,840.50Paragon 1,441.40 1,844.20 2,257.90 2,840.50Payal 1,441.40 1,844.20 2,257.90 2,840.50Finolex 1,441.40 1,844.20 2,257.90 2,840.50Surana 1,441.40 1,844.20 2,257.90 2,840.50Unicab 1,441.40 1,844.20 2,257.90 2,840.50Nicco 1,441.40 1,844.20 2,257.90 2,840.50Asian 1,441.40 1,844.20 2,257.90 2,840.50Suncab 1,441.40 1,844.20 2,257.90 2,840.50Alankar 1,441.40 1,844.20 2,257.90 2,840.50

Cable Glands, Lugs & Cable Joints Etc., Rate per Each

Description Rate

499 Supply and Fixing of heavy duty flange type brass cable glands for 2 to 4 core, 2.5 Sq.mm to 6 Sq.mm PVC armoured cable with brass washers complete.

41.00

500 Supply and Fixing of heavy duty flange type brass cable glands for 2 to 4 core, 10 Sq.mm PVC armoured cable with brass washers complete.

72.00

501 Supply and Fixing of heavy duty flange type brass cable glands for 4 core, 16 Sq.mm / 3.5 core 25Sq.mm PVC armoured cable with brass washers complete.

87.00

502 Supply and Fixing of heavy duty flange type brass cable glands for 3.5 core, 35 Sq.mm / 3.0 core 50Sq.mm PVC armoured cable with brass washers complete.

91.00

503 Supply and Fixing of heavy duty flange type brass cable glands for 3.5 core, 50 Sq.mm PVC armoured cable with brass washers complete.

101.00

116



126.00


155.00


155.00


174.00


200.00


264.00


270.00


395.00

512 Supply and fixing of crimping type copper lugs confirming to I.S specifications for cable upto 16 Sq.mm including nuts and bolts with connections.

8.00

513 Supply and fixing of crimping type copper lugs confirming to I.S specifications for cable of 25 Sq.mm including nuts and bolts with connections.

11.00

Description Rate514 Supply and fixing of crimping type copper lugs confirming to I.S specifications for

cable of 35 Sq.mm including nuts and bolts with connections.21.00


27.75


33.40


40.00


65.00


105.00


116.25


167.00


233.00


337.00

524 Supply and fixing of crimping type aluminium lugs confirming to I.S specifications for cable upto 16 Sq.mm including nuts and bolts with connections.

5.00

525 Supply and fixing of crimping type aluminium lugs confirming to I.S specifications for cable of 25 Sq.mm including nuts and bolts with connections.

6.00


7.00


8.00

117


528 Supply and fixing of crimping type aluminium lugs confirming to I.S specifications for cable of 70` Sq.mm including nuts and bolts with connections.

10.00


12.00

Description Rate530 Supply and fixing of crimping type aluminium lugs confirming to I.S specifications

for cable of 120 Sq.mm including nuts and bolts with connections.16.00


23.00


26.00


40.00


55.00


76.00

536 Providing and erecting epoxy staight through joint out door / indoor for L.T, PVC Armoured cable 1100V grade complete with ferrule, bushings, accessories and suitable clamps duly erected and connected to the supply for the following multi core cables including cost and conveyance of materials and all labour charges etc., complete.

537 --do--2.5 Sq.mm to 16 Sq.mm --do-- 550.00538 --do-- from 25 Sq.mm to 50 Sq.mm cable --do-- 781.00539 --do-- from 70 Sq.mm to 95 Sq.mm cable --do-- 900.00540 --do-- from 120 Sq.mm to 185 Sq.mm cable --do-- 1,475.00541 --do-- 240Sq.mm cable --do-- 1,980.00542 --do-- 300Sq.mm cable --do-- 2,350.00543 --do-- 400Sq.mm cable --do-- 2,750.00

XVI. Temporary Illumination

544 Note: The rates for different materials are incorporated under different categories and the same are to be incorporated from the observed data while working out specification of item of work with rate

XVII. Generators Transformers & Substation Equipment & Protective Gears

545 Note: Techonology is fast changing which is reflecting on the specifications and price structure of Generators and Transformers, hence not incorporated in the rate analysis. However, the rate analysis as per the prevailing market rate may be considered in the approved data while working out finished item of rate.

Sub Station Equipment Rate per Each

Description Rate

546 Carryout routine maintenance, servicing and testing of 630A to 1000A L.T.ACB by cleaning fixed contacts, moving contacts and arcchutes including servicing and putting the ACB in perfect working condition after detting all relay and ON, OFF mechanism etc.

1,800.00

547 Carryout routine maintenance and servicing of LT.Cubical pannel board having approximately 15 to 22 Nos of switches cleaning with power brower and servicing the contacts, tightning the connection of incoming and outgoing cables, and clicking the operating machanism for smooth functioning of switches and putting them in smooth working condition.

2,500.00

118


548 Routine maintenance of transformer in operation covering insulation resistance oil, break down strength. Reconditioning / replacement of silicazel, cleaning of transformer and topping upto oil level if required (extra cost will be paid for oil).

4,350.00

549 Testing of Transformer oil for dielectric breakdown strength. 500.00Removing the existing transformer from the plinth / Pole and refixing the standby transformer of following capacity including connections etc., complete.

550 Upto 315 KVA 2,500.00551 500 / 1000 KVA 3,500.00

Replacing old and unserviceable gasket of top cover plate of transformer having following capacity.

552 Upto 315 KVA 750.00553 500 / 1000 KVA 1,050.00

Replacing old and unserviceable gasket of H. T bushing for the following Transformer capacity.

554 Upto 315 KVA 300.00555 500 / 1000 KVA 550.00

Description Rate

Replacing old and unserviceable gasket of L.T bushing for the following transformer capacity.556 Upto 315 KVA 700.00557 500 / 1000 KVA 1,450.00

Replacement the H/T / L. T burntout winding coils of distribution transformer including rewinding, varnishing and vaccuming etc.,duly retaining the removed burnt winding coils by the Contractor / Firm

558 For copper coils 590.00559 For aluminium coils 390.00560 Insulating HT / LT copper / aluminium coils for Transformers. 300.00

Painting with 2 coats Zinchromate red oxide duly scraping existing paint followed by 2 coats of hammerton grey paint etc., complete.

561 Upto 500 KVA 3,000.00562 630 / 1000 KVA 4,000.00563 Replacing H.T bushing for distribution Transformer by new one. 350.00564 Replacing H.T bushing metal parts for distribution Transformer by new one. 380.00

Replacing L.T bushing for distribution Transformer by new one for the following capacities.565 Upto 315 KVA 165.00566 500 / 1000 KVA 175.00

Replacing L.T bushing metal parts for distribution Transformer by new one for the following capacities.

567 100 KVA 300.00568 250 / 315 KVA 500.00569 500 KVA 1,300.00570 1000 KVA 2,000.00

Drying the repaired transformer with appropriate heat / air of following capacity of transformers.571 Upto 315 KVA 3,000.00572 500 / 1000KVA 4,200.00

Loading and Unloaidng of transformer from site to Workshop or vice verse.573 Upto 500 KVA 4,500.00574 630 / 1000 KVA 6,800.00

PROTECTIVE GEAR (Rate per Each)

575 Supply and erecting approved make 11KV, 5KA metal oxide lightning arrestors suitable for 11 KV supply with necessary materials on existing cross arm.

1,500.00

119


576 Supply and erecting porcelain disc type insulator suitable for 11KV line with suitable hardware on existing cross arms.

600.00

577 Supply and erecting porcelain pin type insulator suitable for 11KV line with suitable hardware on existing cross arms.

300.00

578 Supply and erecting porcelain post type insulator suitable for 11KV line with suitable hardware on existing cross arms.

375.00

579 Supply and erecting porcelain pin/shackle type insulator suitable for L. T. 90.00580 Supply and fixing of lightning protective system conforming to IS : 2309 with all

standard accessories such as metal globe finials on the top of the builiding with 25.4 mm dia 3.0mtrs. Length of 'B' class G.I pipe etc., complete without down conductors and earthing.

600.00

581 Approved made 11KV, 400A A.B switch with all standard accessories etc., complete with cost and conveyance of all materials.

7,000.00

582 Approved made 11KV, 200A A.B switch with all standard accessories etc., complete with cost and conveyance of all materials.

6,100.00

583 Approved made 11KV, 200A A.B switch (tilting) with all standard accessories etc., complete with cost and conveyance of all materials.

5,900.00

584 11KV, H.G fuse set including all standard accessories etc., complete with cost and conveyance of all materials.

4,000.00

Capacitors (Rate per KVAR)Sl.No. 585 586 587 588 589 590 591Description Metalised

poly propylene Condens

er

Mixdieelectric

Condenser

Electronic NKP

Type oil filled allu. Cylinder H. D L. V Capacitor

DTCO - 2 - 100

Detuned capacitor

bank (Operating system 3.3 KV, 3Ph. 50 Hz.

DTCO - 2 - 100

Detuned capacitor

bank (Operating system 6.6 KV, 3Ph. 50 Hz.

DTCO - 2 - 100 Detuned

capacitor bank

(Operating system 11

KV, 3Ph. 50 Hz.

APFC/MPFC/AMPFC panel type capacitor Bank V4N - 100 - 150 KVAR

Visa Power

472.00 625.00 315.00 825.00 851.00 885.00 1,244.00

Alto 330.00 625.00 --- --- --- --- ---Ikon 330.00 625.00 --- --- --- --- ---

Asian 330.00 625.00 --- --- --- --- ---L & T 472.00 625.00 --- --- --- --- ---AEE 472.00 625.00 --- --- --- --- ---

Epcos 330.00 625.00 --- --- --- --- ---

Air Circuit Breaker(Rate per each)Note:For other Reputed makes the price list rate as on 29-01-07 may be adopted.

L & T C & S

592 630 Amps Fixed type 3 pole ACB 52,998.00 48,836.00593 800 Amps Fixed type 3 pole ACB 62,561.00 52,211.00594 1000 Amps Fixed type 3 pole ACB 64,023.00 53,336.00

XVIII. Repairs to Motors and RewindingBearings Etc (Rate Per Each)

595 Bearing of approved make for electric motor single phase / 3 phase AC upto 1 HP of all types.

179.00

596 Bearing of approved make for electric motor single phase / 3 phase AC upto 2 to 3 HP of all types.

231.00

597 Bearing of approved make for electric motor single phase / 3 phase AC upto 5 to 7.5 HP of all types.

306.00

120


598 Bearing of approved make for electric motor single phase / 3 phase AC upto 10 to 12.5 HP of all types.

319.00

599 Bearing of approved make for electic motor single phase / 3 phase AC upto 15 to 20 HP of all types.

489.00

600 Bearing of table / cabin / pedestal / ceiling / exhaust fan complete with alignment of shaft and tested.

84.00

601 Bearing of bush / rubber / ring washers complete with alignment of shaft and tested.

40.00

602 Capacitor of table / cabin / pedestal / ceiling / exhaust fan complete. 38.00

XIX. Miscellaneous

Description Unit Rate

603 M. S. Junction box big size long neck 19 / 20 mm Each 16.20604 M. S. Junction box big size long neck 25 mm Each 16.60605 M. S. Junction box big size long neck 32 mm Each 43.70606 M. S. Junction box big size long neck 40 / 38 mm Each 52.00607 M. S. Junction box big size long neck 50 mm Each 93.60608 M. S. Junction box deep 63 mm 25 / 20 mm Each 27.00609 M. S. Junction box deep 63 mm 32 mm Each 62.40

Description Unit Rate610 M. S. Junction box deep 63 mm 38/40 mm Each 64.50611 M. S. Inspection Bends 19/20 mm Each 14.90612 M. S. Inspection Bends 25 mm Each 15.30613 M. S. Inspection Bends 32 mm Each 38.50614 M. S. Inspection Bends 38/40 mm Each 46.80615 M. S. Inspection Bends 50 mm Each 80.10616 M. S Inspection Tee 19/20 mm Each 16.10617 M. S Inspection Tee 25 mm Each 16.60618 M. S Inspection Tee 32 mm Each 43.70619 M. S Inspection Tee 38/40 mm Each 52.00620 M. S Inspection Tee 50 mm Each 93.60621 M. S Inspection Elbows 19/20 mm Each 14.00622 M. S Inspection Elbows 25 mm Each 14.20623 M. S Inspection Elbows 52 mm Each 36.40624 M. S Inspection Elbows 38/40 mm Each 44.70625 M. S Inspection Elbows 50 mm Each 74.90626 PVC Flexible pipe 19/20 mm 50 Mtrs 125.00627 PVC Flexible pipe 25 mm 50 Mtrs 166.00628 PVC Flexible pipe 32 mm 50 Mtrs 208.00629 PVC Flexible pipe 38 mm 50 Mtrs 416.00630 PVC Flexible pipe 50 mm 50 Mtrs 676.00631 Flexible ccoupling special 19mm Each 7.00632 Flexible ccoupling special 25mm Each 8.80633 Flexible ccoupling special 32mm Each 18.70634 Flexible ccoupling special 38mm Each 21.30635 Flexible ccoupling special 50mm Each 41.60636 10 Guage G. I checknut 19/20 mm 100 Nos 144.00637 10 Guage G. I checknut 25 mm 100 Nos 177.00638 10 Guage G. I checknut 32 mm 100 Nos 333.00639 10 Guage G. I checknut 38/40 mm 100 Nos 437.00

121



640 10 Guage G. I checknut 50 mm 100 Nos 884.00641 Saddle with base 19/20 mm 100 Nos 146.00642 Saddle with base 25 mm 100 Nos 151.00643 Saddle with base 32 mm 100 Nos 250.00644 Saddle with base 38/40 mm 100 Nos 270.00645 Saddle with base 50 mm 100 Nos 312.00646 20 guage Saddles 19/20 mm 100 Nos 78.00647 20 guage Saddles 25 mm 100 Nos 104.00648 20 guage Saddles 32 mm 100 Nos 166.00649 20 guage Saddles 38/40 mm 100 Nos 208.00650 20 guage Saddles 50 mm 100 Nos 260.00651 16 guage Socket coupler 19/20 mm 1 Dozen 33.30652 16 guage Socket coupler 25 mm 1 Dozen 46.80653 16 guage Socket coupler 32 mm 1 Dozen 72.80654 16 guage Socket coupler 38 mm 1 Dozen 83.20655 16 guage Socket coupler 40 mm 1 Dozen 114.40656 16 guage Socket coupler 50 mm 1 Dozen 145.60657 Ball socket 19 mm (A) 1 Dozen 145.60658 Ball socket 25 mm (B) 1 Dozen 135.20659 PVC Junction Boxes 19/20 mm 100 Nos 1,072.00660 PVC Junction Boxes 25 mm 100 Nos 1,189.00661 PVC Junction Boxes 32 mm 100 Nos 2,103.00662 PVC Junction Boxes 40 mm 100 Nos 2,414.00663 PVC deep Junction Boxes 19/20 mm 100 Nos 1,414.00664 PVC deep Junction Boxes 25 mm 100 Nos 1,639.00665 PVC deep Junction Boxes 32 mm 100 Nos 2,502.00666 PVC deep Junction Boxes 40 mm 100 Nos 2,746.00667 PVC Bends 19/20 mm 100 Nos 250.00668 PVC Bends 25 mm 100 Nos 350.00669 PVC Bends 32 mm 100 Nos 1,000.00


670 PVC Bends 40 mm 100 Nos 1,200.00671 PVC Bends 50 mm With Cover 100 Nos 1,800.00672 50 x 25 x 2 mm G. I perforated tray Without Cover 1 RM 125.00673 50 x 25 x 2 mm G. I perforated tray With Cover 1 RM 176.00674 100 x 25 x 2 mm G. I perforated tray without cover 1 RM 190.00675 100 x 25 x 2 mm G. I perforated tray with cover 1 RM 273.00676 100 x 50 x 2 mm G. I perforated tray 1 RM 365.00677 150 x 25 x 2 mm G. I perforated tray 1 RM 363.00678 150 x 50 x 2 mm G. I perforated tray 1 RM 433.00679 300 x 25 x 2 mm G. I perforated tray 1 RM 458.00680 250 x 50 x 2 mm G. I perforated tray 1 RM 619.00681 300 x 50 x 2 mm G. I perforated tray 1 RM 708.00682 300 x 25 x 2 mm G. I perforated tray 1 RM 645.00683 450 x 50 x 2 mm G. I perforated tray 1 RM 995.00684 500x 50 x 2 mm G. I perforated tray 1 RM 1,087.00685 600 x 50 x 2mm G. I perforated tray 1 RM 1,273.00686 OD 75 mm single socket UV Resistant (SWR) pipe 3 Mtr 171.00687 OD 75 mm double socket UV Resistant (SWR) pipe 3 Mtr 187.00688 OD 90 mm single socket UV Resistant (SWR) pipe 3 Mtr 277.00689 OD 90 mm double socket UV Resistant (SWR) pipe 3 Mtr 300.00

122


690 OD 110 mm single socket UV Resistant (SWR) pipe 3 Mtr 334.00691 OD 110 mm double socket UV Resistant (SWR) pipe 3 Mtr 364.00692 Plastic enclosure I.P. 20 1/2 way Each 73.00693 Plastic enclosure I.P. 20 3/4 way Each 124.00694 Plastic enclosure I.P. 20 6 way Each 197.00695 3 mm Hylam sheet Sft 50.00696 6mm x 1 m x 2 m Rubber mat 11 KV ISI SqMttr 1,075.00697 Fire buckets Each 190.00698 STC laminated chart Each 225.00


699 First Aid box 18" x 12" x 8" Each 1,000.00700 11 KV/22 KV Hand gloves Each 140.00701 Copper plate/ Copper strip (Per K. G) 1 Kg 490.00702 No. 8/10 SWG copper wire (per K. G) 1 Kg 495.00703 PVC Insulated copper winding wire of fine quality (per K. G) 1 Kg 550.00704 No. 14 SWG copper wire (per K. G) 1 Kg 495.00705 Copper winding wire (per K. G) 1 Kg 590.00706 G. I Strip/ Plate/Wire/ M. S (per K. G) 1 Kg 55.00707 Alluminum Bus bars/Strips/accessories 1 Kg 185.00708 Alluminum winding wire 1 Kg 390.00709 4" x 4" T. W Board Each 6.20710 6" x 6" T. W Board Each 7.30711 6" x 8" T. W Board Each 12.50712 10" x 8" T. W Board Each 21.90713 12" x 10" T. W Board Each 28.10714 12" x 15" T. W Board Each 45.00715 4" x 4" SDC Board Each 9.00716 6" x 8" SDC Board Each 23.10717 10" x 8" SDC Board Each 29.80718 12" x 10" SDC Board Each 43.90719 12" x 15" SDC Board Each 68.60720 6" x 4" Deep box Each 5.60721 10" x 8" Deep box Each 21.40722 12" x 10" Deep box Each 29.80723 12" x 15" Deep box Each 46.70724 9" x 14" Peta Board Each 16.90725 12" x 10" Peta Board Each 16.90726 15" x 20" Peta Board Each 90.00727 18" x 24" Peta Board Each 122.50728 18" x 30" Peta Board Each 163.10729 6.2 Volt series bulb (25 Nos.) 25 Nos 82.50730 6.2 Volt series bulb with navar plate(25 Nos.) 25 Nos 87.50731 10 K. W Rotating machine Each 15,000.00

Description Unit Rate732 EICHER model 11:10 with 100 H. P direct injestion 4 stroke engine

with one spare wheel 3800 mm cabin high deck with jangla (full body) (4 wheeler) for generator

Each 7,95,069.00

733 Transformer oild tested as per IS-335 - 1972 (per Ltr) 1 Ltr 90.00734 ABC powder (store pressure type) Fire extinguisher 5 kg confirm to

IS- Standards Each 5,100.00

735 ABC powder (store pressure type) Fire extinguisher 10 kg confirm to IS- Standards

Each 7,200.00

736 Filteration of transformer oil as per ISS specifications filters to die 1 Ltr 8.00

123


electric strength above 40 K. V at site. (per Ltr 737 Filteration of transformer oil as per ISS specifications filters to die

electric strength above 40 K. V at workshop (per Ltr)1 Ltr 5.00

738 Cover to PVC junction boxes Each 4.00739 12 mm Screws No8 100 Nos. 30.00740 25 mm Screws No8 100 Nos. 40.00741 30 mm Screws No8 100 Nos. 45.00742 35 / 38 mm Screws No8 100 Nos. 50.00743 50 mm Screws No8 100 Nos. 60.00744 63 / 75 mm Screws No8 100 Nos. 70.00745 TW Seperators / Gutties 100 Nos. 150.00746 Rawl Plugs 100 Nos. 16.00747 U Nails 100 Nos. 40.00748 Alluminium Link Clips 144 Nos. 50.00749 50 mm G.I.Nut and Bolts. 1 Set 12.00750 63 to 100 mm G.I.Nut and Bolts. 1 Set 20.00751 50 mm 0 Gauge Nails 1 Dozen 36.00752 63 to 100 mm 0 Gauge Nails 1 Dozen 60.00753 Hard Coke 1 K. G 8.00754 Salt 1 K. G 4.00


755 PVC Cleats 2 Way 100 Nos. 300.00756 PVC Cleats 4 Way 100 Nos. 400.00757 Binding Wire 1 K. G 40.00758 PVC / Cotton Insulation tape Role ( 10 Mtrs) Each 15.00759 C.I.Knob Each 12.00760 Stay tight set (Jum bracket 300 mm) Pair 250.00761 Stay clamp with bolts and Nuts) 1 Set 160.00762 L.T.Guy insulator 1 No. 35.00763 12 / 15 MS plain rod fan hook 1 No. 20.00764 19 / 20 mm Steel tube fan down rod 1 Rm. 60.00765 Consealed box PVC / MS with hook for fan Each 100.00766 Coil Earthing Each 60.00767 Cable root Indicators Each 75.00768 40 mm x 40 mm x 6 mm angle iron with I bolt. Each 200.00769 Acrylic Cover of size 4" x 7" for night lamps. Each 15.00770 TW / PVC Round Blocks Each 6.00771 G.I.Funnel with Mesh 1/2" x 4" Each 75.00772 Asbestos Sheet Sqft 20.00

124

GOVERNMENT OF ANDHRA PRADESH

COMMON STANDARD SCHEDULE OF RATES

FOR ALL ENGINEERING DEPARTMENTS

FOR THE YEAR 2007-2008 (Effective from 1st June, 2007)

BOARD OF CHIEF ENGINEERS

125

Office of the Engineer-in-Chief (I.W.)I & CAD Dept., Errum manzil, Hyderabad.

Procs.No.ENC/IW/P&M/EE3/DEE10/AE/13305/07 , dt: 13 - 7 - 2007.

Sub:- Common SSRs for all Engineering Department works for the year 2007-08 – approved- Printing & Communication of SSRs – Reg.,

Ref:- 1. G.O.Ms.No.94, I & CAD Dept., dt:1-07-2003. 2. E-in-C( Admn & Roads) Lr. No.15710/DEE/AEE2/MC/2000 Dt.2.6.07 3. E-in-C(PH) Lr.No.146/SSR/2007-08/Vol-1/T1/2007 Dt.12.06.07 4. Commissioner, labour department Lr.No:J2/4066/2007,dt: 18-04-2007.

5.Minutes of BOCEs meeting for Common S S R s held on dt: 5 -7 - 2007. 6.Minutes of Sub-Committee meeting held on dt: 07 -07 - 07

-o0o-The common SSR for the year 2007-08 is approved based on the following.

The Engineer-in-Chief (Admn & Roads), R&B Department has furnished draft

proposals for common materials and conveyance rates of materials vide ref 2nd cited, and

proposed hire charges of machinery and plant as a supplementary item.

The Engineer-in-Chief, Public health Department has furnished Public Health

Work Items and Public Health material rates vide ref 3rd cited.

The regional Superintending Engineers of Irrigation Circles of Dowlaiswaram,

Chittoor & Hyderabad have furnished draft rates of Common materials & work items and

Conveyance rates of Materials of their region., i.e., Andhra , Rayalaseema and

Telangana regions respectively.

The labour rates are obtained from the Commissioner, labour department vide the

reference 4th cited.

Based on the proposals, the draft common SSR for the year 2007-08 was

reviewed and finalized in the annual Board of Chief Engineers meeting held on 5 -7–07

and Sub-Committee meeting held on 07-07-07.

One hard copy & compact disc containing common S.S. Rates are

communicated. No other items other than the items communicated by this Office shall

be introduced in the SSR

The Heads of Department /Regional superintending Engineers of Irrigation & CAD

Dept mentioned below are authorized to print the Common S S R. The unauthorized

printing & selling of the Common SSR is strictly prohibited.

The revised rates will come into force from 1st June of 2007.

The receipt of the proceedings may be acknowledged.

Sd/ B.S.N.Reddy13/7/07Engineer-in-Chief (I.W.)Chairman, BOCE (S.S.R)

ToThe Superintending Engineers of Irrigation Circles of Dowlaiswaram, Chittoor and Hyderabad.Copy along with Enclosures to 1) Engineer-in-Chief (Admn & Roads.)., Roads & Buildings Department.2) Engineer-in-Chief (P.H.), Public Health Department.3) Engineer-in-Chief (P.R.), Panchayath Raj Department.4) Chief Engineer (Buildings), R&B Department.

126

I N D E X

Sl. No. Description

Page No.

From To

1 Preamble 131 133

2 Labour Rates 137 140

3 Common Material &work Items 141 154

4 Building , Sanitary& Water Supply Items 155 155

5 Public Health Items 156 225

6 Conveyance Rates of Materials 226 232

7 Hire Charges 233 236

8 Annexure 237 242

127

PREAMBLE

PREAMBLE

Common SSR 2007-08

128

I.0 AREA ALLOWANCES:

A) CORPORATIONS & MUNICIPALITIES :

a) (i)25% extra over the rates on labour component of works is allowed in all Municipal Corporation Limits of Andhra Pradesh except Greater Hyderabad, Greater Visakhapatnam and Vijayawada municipal corporations and other corporations as notified by the Government from time to time.

(ii)40% extra over the rates on labour component of works for Greater Hyderabad , Greater Visakhapatnam and Vijayawada Municipal Corporation limits.

b) Allow 20% extra over basic rates on labour component of works in all District Headquarters and the remaining Municipal limits ( up to a belt of 12 Kms. from Municipal limits ).

c) For works at Tirumala Hills and Horsely hills in Chittoor District, 30% extra over the basic rates of labour component is allowed.

d) For works located inside Tirumala Temple, allow 20% extra over the rate for Tirumala Hills.

B) JAIL COMPOUNDS:

15% extra is allowed over labour rates for the work in the Jail compounds. Only equivalent number of Man Mazdoor shall be provided in the Jail premises and no women Mazdoor are allowed inside.

C) INDUSTRIAL AREA:

a. 20% over basic rates on labour component works allowed for works situated within 10 Kms belt of Industrial area of, Jeedimetla, Lingampally, Ibrahimpatnam in Ranga Reddy District, Ibrahimpatnam, Vuyyuru, Jaggaiahpeta in Krishna District, Macherla, Gurajala, Challapalli in Guntur District Garividi in Vijayanagaram District, Kothur in Mahabubnagar District, Patancheru, Ramachandrapur in Medak District, Bibinagar in Nalgonda District, Ramagundam and Godavarikhani in Karimnagar District, Renigunta in Chittoor District and Yerraguntla & Mangampet in Kadapa District, Manchiryal, Mandamarri, Bellampalli in Adilabad District, Sarpaka, Kothagudem, Paloncha, Manguguru, Singareni Collieries in Khammam District, Kamalapur, Bhoopalpally of Warangal District, Wadepally of Nalgonda District, Narapally of Karimnagar District, Hindupur, Tadipatri, Anantapur, Guntakal, Rayalcheruvu, Yadiki of Anantapur District and Adoni, Dhone, Cement Nagar, Nandyal, Kurnool, Yemmiganur & Bethamcherla of Kurnool District ,Anakapally of Vishakhapatnam District.

D) AGENCY / TRIBAL AREAS :

a) 20% extra allowed for the works located with in the interior Agency / Tribal limits, i.e. for the works located with in & upto16 KMs from any all weather route inside Agency / Tribal.

b) 30% extra allowed for the works located with in the interior Agency / Tribal limits, i.e. for the works located beyond 16 KMs from any all weather route inside Agency / Tribal.

Common SSR 2007-08

129

NOTE: 1. No extra percentage is permissible in respect of Forest produce such as Bamboo, Rellu grass and for all materials obtained from outside the Agency / Tribal.

2. The extra percentage under Agency / Tribal areas allowance may be allowed on the labour component and on the labour charges in the rates for conveyance of materials.

3. The extra percentage on cost of materials in Agency / Tribal areas can be allowed on the labour component only, if they are manufactured in the Agency / Tribal areas itself except Forest produce.

E) GHAT ROADS:

For Ghat Roads steeper than 1 in 20, the length of the road may be taken as 1.5 times the existing length of the road for the purpose of leads only for conveyance of materials based on the certificate for the Ghat Road given by the Superintending Engineer concerned.

Foot Note: Under compelling circumstances, the concerned Chief Engineer can adopt the equivalent length of road as 2 ½ times of actual length.

Note below area allowances:

If more than one area allowance ( such as those ) for (1) Municipalities (2) Agency / Tribal areas (3) Industrial areas are applicable for a particular situation, only the maximum out of the allowable percentages is to be allowed.

2.0 IMPORTATION OF LABOUR AND LABOUR AMENITIES:

Maximum 13% towards LI & LA will be allowed only in the case of works where the labour component i.e. excluding cost of material such as cement and steel works out to more than Rs. 20.00 lakhs on the basis of certificate of Executive Engineer that the labour available is not adequate and that labour has to be imported for executing the work, subject to approval of the Chief Engineer in terms of G.O.Ms.No.7 Finance (Works & Projects) Dept Dt 20-6-2005.

Note:1) Extra percentage towards labour importation and labour amenities where necessary, is admissible in addition to other percentage allowed:

3.0 WATER LEADS:

The following labour is allowed for conveyance of water for every ½ Kilometer lead or part there of over the initial lead of ½ kilometer.

a) Cement concrete : 1.5 Women Mazdoor / Cum.b) Masonry : 1.0 Woman Mazdoor/ Cum.c) Plastering : 0.5 Woman Mazdoor/ 10 Sq.m

Note:- For Water leads of over 2 KMs, specific approval of Chief Engineer concerned is necessary.

Common SSR 2007-08

130

4.0EXCAVATION OF TRIAL TRENCHES, TRIAL PITS AND EXCAVATION IN RESTRICTED PLACES: -

I) EXCAVATION OF TRIAL TRENCHES, TRIAL PITS AND EXCAVATION IN RESTRICTED PLACES: -

A. TRIAL TRENCHES :

1) Trial trenches of not more than 2 metres in width…25% extra

B. TRIAL PITS :

1) Up to 2 Metres depth … 25% extra2) 2 Metres to 4 Metres depth … 50% extra3) 4 Metres to 6 Metres depth … 75% extra4) 6 Metres to 8 Metres depth … 100% extra5) 8 Metres to 9 Metres depth … 150% extra6) More than 9 Metres depth … 200% extra

II) EXCAVATION IN RESTRICTED PLACES:-

I) Foundation of Buildings … 75% extra

II) For pipe lines where the depth is less … 75% extra than 1.5 times the width

III) For pipe lines where the depth is … 120% extra 1.5 times or more than the width

IV) Silt removal in restricted areas such … 120% extra U. T’s., Culverts and Syphons.

V) Excavation of field channels … 75% extra

VI) For narrow trenches not more than 2 meters in width and depth not less

than twice the width and for excavation … 75% extra of road boundary drains, model sections of canals.

VII) High berm cutting of not more than … 50% extra 150 mm average thickness and sectioning for roads

Note: 1) The extra percentage is allowed over S. S. 20 B rate for corresponding soil. It includes the charges for all lifts and initial lead but does not include deviation of charges if any in respect of all the items under ( A) and (B) above.

2) The above extra percentages in respect of excavation in restricted places are not to be allowed in respect of items involving blasting component which may be taken as 1/3 of the cost.

5.0Proportion of First class and 2 nd class workmen under Skilled Labour :

30% of the skilled labour provided in the data may be taken as 1st Class and the remaining 70% as 2nd Class.

Common SSR 2007-08

131

6.0A) Cement Concrete proportion and requirement of coarse aggregate

etc., for 1 cum (unit ) of finished work:

I) For Cement concrete proportions (1:4:8), (1:5:10) etc., 0.92 cum. of coarse aggregate shall be adopted and the quantity of mortar required calculated proportionately in each case.

II) For cement concrete proportions (1:5:8), (1:6:10) etc., 0.90 cum. of

coarse aggregate shall be adopted and the quantity of mortar required calculated proportionately in each case.

B) Requirement of Cement for stone masonry per unit ( one cum.) of finished work:

I) C. R. Masonry 1st Sort 0.28 Cum. of Cement Mortar.II) C. R. Masonry 2nd Sort 0.32 Cum. of Cement Mortar.III) R. R. Masonry 0.34 cum. of Cement Mortar.

Note:- In massive walls above 3 Mts. thick 0.40 cum. of cement mortar shall be allowed.

7.0 Revetment and apron works:

I) The size of stone for the volume range ( 0.015 to 0.030 Cum) shall not be less than (0.30 X 0.30 X 0.15 to 0.30 X 0. 225 X 0.225m)

II) The size of stone for the volume range (0.011 to 0.015 Cum) shall not be less than (0.30 X 0.225 X 0.15 to 0.225 X 0.225 X 0. 225 m)

III) The rate of labour component as per the standard data book is to be adopted for revetment work only. However for apron work Rs. 2.50 per cum. should be deducted.

IV) For the labour for the “Rock Toe” shall be taken as 2/3rd of the labour charges of revetment as Chief Engineer, Circular No. P3/ OT2/ T3/ 65167/78, Dt: 19.03.1980.

8.0 Deep cuts:

Deep cuts are defined as reaches of canal where excavation in all soils is for a depth of excavation 6m and more. The following increase over normal rates is permitted in deep cuts on a graded basis.

I) Up to 6 m excavation: The S. S. R. of corresponding classification of earth work excavation is applicable.

II) Beyond 6 m and up to 9 m excavation - 9% extra

III) Beyond 9 m and up to 12 m excavation - 12% extra

IV) Beyond 12 m and up to 16 m excavation - 15% extra

V) Beyond 16 m and up to 30 m excavation - 20% extra

VI) Beyond 30 m excavation - 40% extra

Common SSR 2007-08

132

NOTE : 1) The extra percentage is only on basic rate. 2) The above percentage are not applicable for “LEADS & LIFTS”. 3) The above extra percentages are to be allowed only on items excluding the blasting component which may be taken as 1/3 of the rate.

9.0 The conveyance of bitumen for bulk and packed may be admitted as follows:

Packed --- Rs. 1.75per Km/ MTBulk --- Rs. 1.50 per Km/ MT (round the trip)

10.0 SEIGNIORAGE CHARGES :

Seigniorage charges for materials as fixed by the Government in G.O.Ms.No.217(industries and commerce department), dated 29. 9.2004 may be added in the data of rates in the estimate. In case of revision, the revised rates as fixed by Mines and Geology Department have to be adopted.

11.0 EARTH WORK EXCAVATION BY MACHINERY:

Excavation in all soils up to SDR & Stone matrix with machinery within a radius of 5 m i.e. cut and dump – Basic rate for SS 20B Rs : 13.00 / cum

NOTE:-I) The machinery rate for earth work excavation should be adopted for more than 1000 cum quantity as per G. O. Ms. No. 134 Dated: 25.11.2002. (Irrigation & COD).

II)The machinery rates for earth work excavation for soil classification should be adopted as per G.O. Ms. No 10 Dated : 26.07.2005 Finance(works & Projects) Dept. The machinery rates for soil classification from Extracts of the above G.O are as follows.(The machinery rates for earth work excavation should be adopted for 1000 Cum or more.)

1. Excavation of all soils upto SDR Rs: 13.00/Cum

2. Excavation in H.D.R-I & II Rs: 19.50/Cum

3. Excavation in F & F rock Rs: 43.50/Cum

4. Excavation of Hard rock and boulders Rs: 87.00/ Cum of more than 3 Cum in Size requiring

blasting by machinery.

Note: The machinery rates for above items are to be adopted as per Government orders issued from time to time.

III) The earth work excavation by machinery Rs: 6.50 /cum - rehandling(second operation)

Common SSR 2007-08

133

LABOUR RATES

Common SSR 2007-08

134

RATES OF LABOUR

Sl. No.

S.S. Item No.

Description Unit (per)

S S RATE FOR

2007-08

1 2 3 4 5 (A) Skilled Workmen First Class

1 1 a Mason and stone Cutter Day 180.00

2 b Brick Layer Day 180.00

3 c Carpenter Day 180.00

4 d Painter Day 180.00

5 e Plumber Day 180.00

6 f Welder Day 180.00

7 g Fitter Day 180.00

8 h Electrician Day 180.00

9 I Cook Day 180.00

10 2 Mechanic Day 180.00

11 3 Rigger Day 180.00

12 4 Rigger Syrang Day 180.00

13 5 Well Sinker Day 180.00

14 6 Blaster Day 180.00

15 7 Tipper and Heavy Vehicle Driver above 12 T Day 190.00

16 Tanker and Medium Vehicle Driver (7.5 T to 12 T) Day 170.00

17 Tanker and Light Vehicle Driver up to 7.5 T Day 155.00

18 Wagon Drill Operator upto 7.5 T Day 190.00

19 8 Lorry and Heavy Vehicle Driver above 12 T Day 190.00

20 Road Roller Driver ( 7.5 T to 12 T) Day 170.00

21 Road Roller Driver up to 7.5 T Day 155.00

22 9 Tractor Driver above 12 T Day 190.00

23 Tractor Driver ( 7.5 T to 12 T) Day 170.00

24 Tractor Driver upto 7.5 T Day 155.00

Operator

25 10 Pan Mixer Day 180.00

26 Concrete mixer Day 180.00

27 Vibrator Day 180.00

28 Compressor Day 180.00

29 Jack Hammer Day 180.00

30 Driller Day 180.00

31 Boring Maistry Day 180.00

Common SSR 2007-08

135

Sl. No.

S.S. Item No.


S S RATE FOR

2007-08

1 2 3 4 5

32 11 Pump Operator Day 180.00

33 12 Turner Grade-I Day 180.00

34 13 Wireless Operator Day 190.00

35 14 Assistant Wireless Operator Day 160.00

36 15 Jeep Driver Day 155.00

37 16 Work inspector with I.T.I qualification Day 180.00

38 17 Work Inspector with LCE,LME,L.E.E Qualification Day 210.00

39 18 Work Inspector with B.E ( Civil, Mechanical and Electrical qualification)

Day 300.00

40 19 Work Inspector with Non-technical qualification SSLC/SSC/HSC Day 160.00

41 20 Mason Spl. Grade for Mossaic and Polished shahabad stone floor

Day 180.00

42 21 Computer Operator Day 200.00

(B) SEMI-SKILLED WORKMEN

SECOND CLASS

43 1 a Mason Day 160.00

44 b Brick Layer and Stone Cutter Day 160.00

45 c Carpenter Day 160.00

46 d Painter Day 160.00

47 e Plumber Day 160.00

48 f Blacksmith Day 160.00

49 g Welder Day 160.00

50 h Fitter Day 160.00

51 I Electrician Day 160.00

52 2 Caulker Day 160.00

53 3 Barbender Day 160.00

54 4 Tinker Day 160.00

55 5 Sawyer Day 160.00

56 6 Brick-Moulder Day 160.00

57 7 Pot-tile turner Day 160.00

58 8 Pan -tile turner Day 160.00

59 9 Brick and Lime Kiln man /Glazzer Day 160.00

60 10 Telephone Operator Day 160.00

61 11 Hand Driller Day 160.00

62 12 Quarry man Day 160.0063 13 Hammer man Day 160.00

Common SSR 2007-08

136

Sl. No.

S.S. Item No.


S S RATE FOR

2007-08

1 2 3 4 564 14 Thatcher Day 160.0065 15 Fireman Day 160.0066 16 Cleaner/Helper Day 160.0067 17 Stone Packer Day 160.0068 18 Jawali Day 160.0069 19 Ex-Service man/Goorkha watchman Day 130.0070 20 Ratton worker Day 160.0071 21 Mate Day 160.00

(C) UNSKILLED WORKMEN

72 1 Head mazdoor(Mukaddar) Day 130.00

73 2 Man mazdoor Day 130.00

74 3 Watch man Day 130.00

75 4 Picottah man Day Deleted

76 5 Woman Mazdoor Day 130.00

77 6(a) Casual labour on loading & Un-loading operations Day

78 6(b) Helpers/Cleaners/Sweepers/Scavangers/Choukidaars/Security Guards/Office Boys

Day

79NOTE: Whenever unskilled workmen are engaged for cleaning of Sewers & Septic Tanks, they may be paid double of the above wages.

(D) OTHER CONVEYANCE ITEMS

80 1 Single bullock with driver and cart Day 175.00

81 2 Bullock pair with driver Day 175.0082 3 Bullock pair with driver and cart Day 190.00

83 4 Bullock pair with driver and cart with Pneumatic tyres Day 235.00

84 5 Bullock pair with driver and kapila Day Deleted

85 6 Nava with crew Day 170.0086 7 Punt thundal Day 140.0087 8 Punt lascar Day 140.00

88 9 Punt boy lascar Day Deleted

Note: - 1)The wage should not be less than the minimum wages of schedule of employement, subject to out turn.

2)25% extra over the corresponding labour rates in respect of the work to be done during night time subject to issue of certificate accordingly by the concerned estimate sanctioning authority for providing in the data and by concerned Executive Engineer in charge of the work for payment.The night time allowance is applicable only to the works done under Greater Hyderabad Municipal Corporation limits only.

Common SSR 2007-08

137

COMMON MATERIAL

AND WORK ITEMS

Common SSR 2007-08

138

RATES OFCOMMON MATERIALS&WORK ITEMS

Sl. No

S.S. Item No.

Description UnitSS Rate

For2007-08

1 2 3 4 5

(A) STONE AND ROAD MATERIALS

ROUGH STONE QUARRIED INCLUDING WEDGING, BREAKING,BURNING, SPLITING AND STACKING

89 22.a For R.R Masonary Work (other than Granite, Dolomite and Trap

1 cum 116.00

90 b.I For SS Revetment work 225 mm 1 cum 62.00

91 b.ii For SS Revetment work 300 mm 1 cum 82.50

92 b.iii For SS Revetment work450 mm 1 cum 99.00

93 C Jeddy Stone above 450 mm to 600 mm 1 cum 136.00

94 d I. Laterite for revetment 225 mm 1 cum 85.00

95 d II. Laterite for revetment 300 mm 1 cum 99.00

96 d.iii Granite for SS revetment 225 mm 1 cum 102.00

97 d.iv Granite for SS revetment 300 mm 1 cum 118.00

Note:- Only when other granite is not available

98 E Laterite for masonry 1 cum 99.00

99 F Cyclopean stones above 0.2 cum 1 cum 183.00

100 G For R.R.Masonry works ( granite, dolamite and trap variety

1 cum 135.00

101 NOTE:- For items 22(a) to 22© and 22(g) add extra Rs /cum, wherever quarrying is done by blasting 1 cum 58.00

COURSED RUBBLE STONE QUARRYING WEDGING, BREAKING, BURNING AND SPLITTING INCLUDING STACKING FOR SS FIRST SORT WORKS

102 23.a Granite, dolamite and trap 1 cum 190.00

103 B For other varieties 1 cum 132.00

104 27 Granite stone slabs for culverts, lintels and copings (3 faces dressed coarsed rubble masonary)

1 cum 1225.00

105 NOTE: - For items 23(a), 23(b) and 27 add extra Rs. Per Cum, wherever quarrying is done by blasting

1 cum 60.00

106 28 Bond stones ( 600 x 200 x 200 mm ) each 20.00

107 B Chainage stones and Centre line stones (750x150x150xmm)

each 26.00

29 (a) Kilometers stones ( 1100 x 370 x 250 mm) each deleted

B 5th Kilometers stones ( 1520 x 520 x 250 mm) each deleted

Common SSR 2007-08

139

Sl. No

S.S. Item No.


For2007-08

1 2 3 4 5

30 (a) Hectometers stones ( 900 x 200 x 200 mm) each deleted

108 31 Demarcation Stones ( 900 x 150 x 150 mm) each 50.00

109 32.a Guard Stones ( 1200 x 200 x 200 mm ) each 75.00

110 B Guide Stones ( 800 x 150 x150 mm ) each 50.00

111 C Carving letters and figures in stone up to 100 mm size each 4.00

112 D Carving letters and figures in stone above 100 mm size each 5.30

HARD BROKEN STONE OF GRANITE, TRAP AND DOLERITE FREE FROM DUST OBTAINED BY QUARRYING, WEDGING, BREAKING, BURNING AND SPLITTING INCLUDING STACKING.

113 33.a - do - 6mm size (SS 5) 1 cum 330.00114 b - do - 10mm size (SS 5) 1 cum 430.00115 c - do - 12mm size (SS 5) 1 cum 530.00116 d - do - 20mm size (SS 5) 1 cum 650.00117 e - do - 25mm size (SS 5) 1 cum 640.00118 f - do - 40mm size (SS 5) 1 cum 385.00119 g - do - 50mm size (SS 5) 1 cum 300.00120 h - do - 60mm size (SS 5) 1 cum 275.00121 I - do - 65mm size (SS 5) 1 cum 250.00122 j - do - 75mm size (SS 5) 1 cum 200.00

123 k - do - 75 to 100mm size (SS 5) 1 cum 160.00

124 NOTE:- (1) Add extra Rs. /- per cum for items 33 (a) to 33 (k) if the metal is obtained by blasting

60.00

125 (2) Add 25% extra per cum if the metal is obtained by machine crushing excluding cost of blasting.

25%

126 (3) Deduct Rs. /- per cum if the metal or rubble is obtained from surface stone and boulders. 7.00

127

(4) Add Rs. /- per cum for selection of stones and boulders from excavated spoil dumps for items 33 a to 33 k, when this addition of Rs. /- per Cum is allowed, deduction of Rs. /- per Cum mentioned under Note (3) above should invariably be made.

13.00 7.00

SOFT BROKEN STONE SCREENED AND FREE FROM DUST INCLUDING STACKING

128 33.l - do - 40 mm size ( SS 5 ) 1 Cum 82.50129 33.m - do - 50 mm size ( SS 5 ) 1 Cum 73.50130 33.n - do - 60 mm size ( SS 5 ) 1 Cum 58.50131 33.o - do - 65 mm size ( SS 5 ) 1 Cum 52.00132 33.p - do - 75 mm size ( SS 5 ) 1 Cum 49.00

HARD BROKEN STONE OF GRANITE TRAP DOLERITE AND DOLAMITE FREE FROM DUST OBTAINED BY QUARRYING WEDGING, BREAKING, BURNING AND SPLITTING INCLUDING STACKING (QUARTZITE AND BASALT WITH AGGREGATE IMPACT OF LESS THAN 20)

Common SSR 2007-08

140

Sl. No

S.S. Item No.


For2007-08

1 2 3 4 5133 a)

33a -do- 2.36 mm to 5 mm size ( IRC and MORTH) 1 cum 180.00

b) b -do- 5 mm to 7 mm size ( IRC and MORTH) 1 cum 330.00

134 c -do- 9.5 mm to 11.2 mm size ( IRC and MORTH) 1 cum 430.00

135 d -do- 12mm to 14 mm size ( IRC and MORTH ) 1 cum 530.00

136 e -do- 19 mm to 22 mm size ( IRC and MORTH ) 1 cum 650.00

137 f -do- 25 mm to 27 mm size ( IRC and MORTH ) 1 cum 640.00

138 g -do- 40 mm to 45 mm size ( IRC and MORTH ) 1 cum 385.00

139 h -do- 50 mm to 55 mm size ( IRC and MORTH ) 1 cum 300.00

140 i -do- 60 mm to 63 mm size ( IRC and MORTH ) 1 cum 275.00141 j -do- 65 mm size ( IRC and MORTH ) 1 cum 250.00142 k -do- 75 mm size ( IRC and MORTH ) 1 cum 200.00

143 1NOTE:- Add extra Rs. /- per cum for items 33 (a) to 33 (j) if the metal is obtained by blasting 1 cum 60.00

144 2 Add 25% extra per cum if the metal is obtained by machine crushing excluding cost of blasting.

1 cum 25%

145 3 Deduct Rs. /- per cum if the metal or rubble is obtained from surface stones and boulders

1 cum 7.00

146 4

Add Rs. /- per cum for selection of stones and boulders from excavated soil dumps for items 33 (a) to 33 (k), when this addition of Rs. /- per cum allowed deduction of Rs. /- per cum mentioned under note (3) above should invariably be made

1 cum 13.00 7.00

HARD BROKEN STONE OTHER THAN GRANITE SUCH AS QUARTZ, QUARTZ-NAPA AND BASALT SCREENED AND FREE FROM DUST INCLUDING STACKING

147 33.q - do - 10 mm size (SS 5) 1 Cum 265.00

148 -do- 9.5 mm to 11.2 mm size ( IRC and MORTH ) 1 Cum 265.00149 r - do - 12 mm size (SS 5) 1 Cum 248.00150 -do- 12mm to 14 mm size ( IRC and MORTH ) 1 Cum 248.00

151 S - do - 20 mm size (SS 5) 1 Cum 201.00

152 -do- 19 mm to 22 mm size ( IRC and MORTH ) 1 Cum 201.00

153 T - do - 25 mm size (SS 5) 1 Cum 198.00

154 U - do - 40 mm size (SS 5) 1 Cum 117.00


156 V - do - 50 mm size (SS 5) 1 Cum 103.00


158 33.w - do - 65 mm size (SS 5) 1 Cum 98.00

159 -do- 60 mm to 65 mm size ( IRC and MORTH ) 1 Cum 98.00160 X - do - 75 mm size (SS 5) 1 Cum 81.00161 - do - 75 mm size ( IRC &MORTH) 1 Cum 81.00162 Y - do - 75 to 100 mm size (SS 5) 1 Cum 64.00

Common SSR 2007-08

141

Sl. No

S.S. Item No.


For2007-08

1 2 3 4 5163 - do - 75 to 100 mm ( IRC& MORTH) 1 Cum 64.00

OTHER ITEMS INCLUDING STACKING

164 33.z1 Laterite 40 to 75 mm ( ring) 1 Cum 70.00165 z2 kankar, hard broken kankar 40 to 75 mm ( ring ) 1 Cum 52.50

166 z3 Soling stone of 150 mm size of granite, trap and Dolamite varieties.

1 Cum 65.50

167

NOTE:- (1) Add extra for items to 33(z3) Rs /- Per cum, wherever quaring is done by blasting. (2) Wherever controlled blasting is resorted to the Chief Engineer concerned shall approve the observed data in support of SS item No. 22 a to 22 c , 22g, 23

1 Cum 60.00

168 z4 Soling stone of 150 mm size other than granite variety 1 Cum 46.00

169 z5 Soling Stone laterite, Kankar 150mm, surface stone 1 Cum 28.00

170 z6 Field picked metal unbroken 20 mm size 1 Cum 38.00

171 z7 - do - 25 mm size 1 Cum 30.00

172 z8 - do - 40 mm size 1 Cum 33.50

173 z9 - do - 50 mm size 1 Cum 30.00

174 z10 - do - 60 mm size 1 Cum 25.00

175 z11 - do - 80 mm size 1 Cum 18.00

176

NOTE:- Add Rs. /- Per Cum for selection of stone and boulders from excavated spoil dumps for items 33 (Q) TO 33 Z , when this addition of Rs. /- per Cum is allowed, deduction of Rs. /- per Cum should invariably be made towards the metal or rubble if it is obtained from surface stone and boulders.

13.00 7.00

177 34 Gravel including stacking 1 Cum 48.00

178 35 a Quarry rubbish 1 Cum 20.50

B HBG Stone Chips 2.36mm and below 1 Cum 101.00

179 36.a Sand for mortar, ceiling coat including washing screeening etc.,

1 Cum 89.00

180 B Sand for filling and blindage 1 Cum 37.00

181 37 Clay for puddle and masonry Items 38 (a) to 39 (h) As per local prevailing rates based on compititive quotations.

1 Cum 22.50

(C) LIME AND CEMENT

182 40 to 41(c )

As per local prevailing

rates based on

competitive rates.

183 42 Cement excluding cost of empty cement bags Metric Tonne

4300.00

NOTE: (1) The rate is material at site ( No conveyance charges to be allowed)

Common SSR 2007-08

142

Sl. No

S.S. Item No.


For2007-08

1 2 3 4 52)As per the rates applicable to the District. 3) Least of the (1) and (2 ) above may allowed 4) The price of cement will be reviewed and fixed quarterly and rates will be communicated separetely.

184 42.a Labour for mixing cement mortar 1 Cum 22.50

185 B Mixing of cement mortar by machine 1 Cum 39.50

186 C Grinding lime mortar or Surkhi mortar 1 Cum 67.00

187 D Shell lime slaked and screened 1 Cum 671.00

188 E White cement 1 Kg. 17.00

(D) MORTARS

18943 to

45 Items 43 to 45

Rates have to be worked out

based on standard

data.

(E) METAL AND IRON WORKS

190 Mild steel rods 6mm dia.One

Metric Tonne

32175.00

191 Mild steel flatsOne

Metric Tonne

29850.00

192 Mild Steel, Structural Steel, I.e., Angles, Channels and I sections.

One Metric Tonne

31900.00

193 High Yield Strengh Deformed BarsOne

Metric Tonne

30850.00

194 Mild steel platesOne

Metric Tonne

36000.00

NOTE: (1) The rate are inclusive of sales tax. 2)As per the rates applicable to the District. 3) Least of the (1) and (2 ) above may allowed 4) The prices of steel will be reviewed and fixed quarterly and rates will be communicated separately.

III RATES OF WORKS

(A) CLEARING SITE

195 1.a Clearing heavy Jungle 1 Sqm 1.70

196 B Clearing light Jungle 1 Sqm 1.60

197 C Clearing Scrub Jungle 1 Sqm 1.60

198 DClearing Juliflora (Prosafis) jungle including up-rooting and removing of Juliflora stumps. 1 Sqm 2.90

199 2.a.I Cutting and removing Palmyrah trees including stacking of girth 30 to 100 cm.

Each 24.00

200 Ii - do - 100 to 200 cm. Each 38.40

Common SSR 2007-08

143

Sl. No

S.S. Item No.


For2007-08

1 2 3 4 5

201 2.b.I Uprooting and removing Palmyrah stumps including stacking of girth 30 to 100 cm.

Each 26.80

202 Ii - do - 100 to 200 cm. Each 42.00

203 2.c.ICutting and removing date trees including stacking of girth 30 to 100 cm Each 16.30

204 Ii - do - 100 to 200 cm Each 25.20

205 d.I Uprooting and removing stumps of date trees including stacking of girth 30 to 100 cm.

Each 16.30

206 Ii - do - 100 to 200 cm Each 21.90

207 e I Cutting and removing other kindof trees including stacking of girth 30 to 100 cm

Each 21.90

208 Ii - do - 100 to 200 cm Each 34.20

209 iii - do - above 200 cm Each 56.60

210 f.I Uprooting and removing stumps of other kind of trees including stacking of girth 30 to 100 cm.

Each 16.30

211 Ii - do - 100 to 200 cm Each 23.20

212 iii - do - above 200 cm Each 32.00

213 3.a Uprooting and clearing prickly pear jungle 1 Sq.m 1.50

214 B - do - under 2.5 meters height including burning and burrying as directed.

1 Sq.m 2.00

215 C - do - over 2.5 meters height including burning and burrying with an initital lead of conveyance

1 Sq.m 2.50

216 4.a

Removing of natchu, goobi, thooti etc., from drains, channels including clearance if not more than 1 metre depth of water with an initial lead of 10 metresand lift of 2 metres.

1 Sq.m 1.30

217 b.I Clearing alchi, tilla 1 Sq.m 2.50

218 b.ii Removal of Jammu 1 Sq.m 1.30

219 c.I Removal of imponea, cornea 1 Sq.m 2.50

220 c.ii Removal of water hyacinth upto 30 cm thick. 1 Sq.m 2.70

221 c.iii - do - more than 30 cm thick 1 Sq.m 3.70

222 D Removal of natchu, goobi, thooti etc., for every extra lead or lift over the initial lead or lift.

1 Sq.m 0.80

(B) DISMANTLING

5DISMANTLING, CLEARING AWAY AND CAREFULLY STACKING MATERIALS USEFUL FOR REUSE.

223 n.(i) Dry rough stone revetment for aprons and stacking within 40 metres

1 cum 30.00

(C) QUARRYING AND BLASTING

224 6 Blasting and removing hard granite measured in solid 1 cum covered

Common SSR 2007-08

144

Sl. No

S.S. Item No.


For2007-08

1 2 3 4 5under earth work item

7 Drilling holes in hard granite or sheet rock

a) Manually ( Hand)

225 I) 20 mm dia meter 1 RM 76.00

226 ii) 25 mm dia meter 1 RM 82.00

227 iii) 36 mm dia meter 1 RM 92.50

b) Pneumatic Compressor

228 I) 20 mm dia meter 1 RM 85.50



8Grouting the holes with neat cement slurry excluding cost of steel

231 I) 20 mm dia meter 1 RM 54.50



(D) EARTH WORK

234 NOTE:- 1. Standard Specification No.20-A requires breaking clods,ramming and sectioning of spoil bank etc.,

235 2. Standarad Specification No.20-B does not require that three items of work detailed above, but does require neat banking in accordance with the standard specification.

236 3. A separate rate for these three items of work will not be necessary where the earth work is executed under the standard specification No. 20-A.

236a Allowances for Excavation and Forming Embankment:

(I) Top soil removal - upto 5%

(ii)Consolidation allowance to Proctor's Density - 10%

(iii)Shrinkage Allowance - 2 to 2.5%

(iv)Wastage- 1%

(v)Allowance for removal of boulders - Nil

236b Conveyance by Lorries not applicable to head leads

(vi) Clay 25%

loamy,Red Earth,Gravel,Homogeneous soils- 18%

(vii) Allowance for compaction and Shrinkage- 12 to 12.5%

Common SSR 2007-08

145

Sl. No

S.S. Item No.


For2007-08

1 2 3 4 5

EARTH WORK EXCAVATION AND DEPOSITING ON BANK WITH AN INITIAL LEAD OF 10 METRES AND AN INITIAL LIFT OF 2 METRES IN CASE OF HEAD LEAD ONLY.

237 8.a Sand or loose soils wet sand not under water, silt in canals,channels and drains SS 20-A.

1 cum 22.50

238 B - do - 20-B 1 cum 23.50

239 9.a Loamy and Clayey soils like black cotton soils, red earth and ordinary gravel SS 20-A.

1 cum 37.00

240 B - do - 20-B 1 cum 33.50

241 10.b Slushy soil and silt clearance upto 0.60 metres depth SS 20-B

1 cum 37.00

242 11.b Clayey Soil in wet and slushy condition SS 20-B 1 cum 38.50243 12.a Hard Gravelly Soils SS 20-A 1 cum 38.50244 B - do - SS 20-B 1 cum 36.00

245 13.aMixture of gravel and soft disintegrated rock like shales ordinary gravel, stoney earth and earth mixed with fair sized boulders SS 20-A

1 cum 40.50

246 B - do - 20-B 1 cum 37.00

247 14 Soft disentigrated rock ( removable by pick axes and crow bars)

1 cum 43.50

248 15 Stone matrix 1 cum 45.00

249 16Hard disintegrated rock or soft rock or conglomerate rock etc., removable by pick axes and crow bars 1 cum 59.00

250 17 Hard disintegrated rock or soft rock or conglomerate rock and Hard lime kankar requiring partial blasting.

1 cum 78.00

251 18.a.I Fissured and fractured rock and boulders upto 3 cum in size requiring blasting including stacking

1 cum 131.00

252 a.ii - do - Stacking is not done 1 cum 126.00

253 18.b.I Excavation of Nandyal Slabs more than 3 cum in size requiring blasting including stacking

1 cum 162.00

254 b.ii - do - Stacking is not done 1 cum 156.00

255 19.a.I Hard rock and boulders more than 3 cum in size requiring blasting including stacking

1 cum 291.00

256 a.ii - do - Stacking is not done 1 cum 276.00

a.iii Hard rock and boulders more than 3 cum in size wherever quarrying is done by controlled blasting.

1 cum 364.00

a.iv - do - Stacking is not done 1 cum 349.00

257 19.b Benching, chiselling, wedging and boring in rock in foundation grade levelling.

1 cum 401.00

FOR ALL SOILS, SOFT DISINTEGRATED ROCK AND STONE MATRIX (ITEM N0s 8-b to 15 ABOVE )

258 20.a.I Extra for every additional 10 metres lead or part there of over the initial lead for the first 3 extra leads

1 cum 1.50

259 Ii -do- from 4 th extra lead to 6 th extra lead 1 cum 2.50260 iii -do- from 7 th extra lead to 9 th extra lead 1 cum 3.60

FOR HARD DISINTEGRATED ROCK (ITEM 16 TO 17 ABOVE )

261 20bi (Extra for every additional 10 metres lead or part there 1 cum 2.50

Common SSR 2007-08

146

Sl. No

S.S. Item No.


For2007-08

1 2 3 4 5of) over the initial lead for the first 3 extra leads

262 Ii Extra for every additional 10 mtrs. Lead or part there of from 4 th extra lead to 6 th extra lead

1 cum 4.00

263 iii -do- from 7 th extra lead to 9 th extra lead 1 cum 5.50

FOR FISSURED AND FRACTURED HARD ROCK AND BOULDERS ETC., (ITEM 18 & 19 a ABOVE)

264 20.c.I (Extra for every additional 10 metres lead or part there of) over the initial lead for the first 3 extra leads

1 cum 4.00

265 Ii Extra for every additional 10 mtrs. Lead or part there of from 4 th extra lead to 6 th extra lead

1 cum 6.60

266 iii -do- from 7 th extra lead to 9 th extra lead 1 cum 7.30

FOR ALL SOILS, SOFT DISINTEGRATED ROCK AND STONE MATRIX (ITEM N0s 8-b to 15 ABOVE )

267 21.a.I Extra for every additional 1 metre lift or part there of over the initial lift for the first 3 extra lifts

1 cum 1.50

268 Ii Extra for every additional 1 mtrs. lift or part there of from 4 th extra lift to 6 th extra lift

1 cum 2.40

269 iii -do- from 7 th extra lift and above 1 cum 3.70

FOR HARD DISINTEGRATED ROCK (ITEM 16 & 17 ABOVE )

270 21.b. I Extra for every additional 1 metres Lift or part there of over the initial lift for first 3 extra lifts

1 cum 2.40

271 ii Extra for every additional 1 mtrs. lift or part there of from 4 th extra lift to 6 th extra lift

1 cum 3.60

272 21.b.iii -do- from 7 th extra lift and above 1 cum 5.40

FOR FISSURED AND FRACTURED, HARD ROCK AND BOULDERS ETC.(ITEM 18 TO 19 a ABOVE)

273 21.c.I Extra for every additional lift of 1 metre or part there of over the initial lift for the first 3 extra lifts

1 cum 4.80

274 ii Extra for every additional lift of 1metre or part there of over from 4th extra lift to 6 th extra lift

1 cum 6.00

275 iii -do- from 7 th extra lift and above 1 cum 7.90

276 Note: The lift charges mentioned in SS item Nos 21a,21 b, and 21c under (D) Earth work are applicable to delifts also.

277 22.aAdd to relevant SS 20-A rates for new tank bunds, closing breaches, road formation and embankments for extra watering and consolidation by stone roller upto 1 tonne.

1 cum 2.40

278 B - do - with stone roller 2 tonnes or cattle treading 1 cum 4.10

b(I)

Add to relevant SS 20-A rates for new tank bunds, closing breaches, road formation and embankments for extra watering and consolidation by pneumatic tampers at 90% proctor's density.

1 cum 4.60

279 C Add to relevant SS 20-A rates for new tank bunds,closing breaches, road formation and embankments for extra watering and consolidation of proctor's density with 8 to 10 tonne power roller including watering and conveyance

1 cum 24.00

Common SSR 2007-08

147

Sl. No

S.S. Item No.


For2007-08

1 2 3 4 5of water for initial lead of 1/2 Kilometer

280

Note: The element of Hire charges is Rs 51.76 per 10 cum corresponding to the hire charges of 8 to 10 Tonne power roller fixed at Rs. 2200 /- per day of 8 hours. The rate shall be increased when the element of hire charges increases for item No. 22 c above,if the roller is lent to the contractor at a rate of Rs 275/- per hour (I.e) Rs 2200 /- per day of 8 hours may be effected.)

281 22.d Extra for every additional 1/2 km lead for water over the initial lead of 1/2 Km for consolidation of banks .

1 cum 2.50

282 23.a Benching old embankment slopes 0.45 x 0.45 metres. 1 RM 1.50

283 23.b Puddle wall work 1 cum 39.00

284 24Turfing slopes including watering for 3 months with initial lead for conveyance of water and grass for 1 hectometre. 1 Sq.m 16.50

285 25Refilling with the excavated sand complying with the standard specifications for filling foundations 1 cum 12.50

286 26.aRefilling with the excavated soils ( other than sand) complying with the standard specifications for filling foundations.

1 cum 8.40

287 BTrimming of slopes of embankments and depositing the soils on the top of the bank. 1 cum

50% of earth work

excavation of similar

classification

288 C Ploughing 1 Sq.m 0.50

(E) CONCRETE AND (G) STONE MASONRY

289 SSI NOS 31a to 39 and SSI Nos. 60 to 87

Rates have to be worked based on

standard data

290 Note:

291 1. Add for vibrating concrete 1 cum 38.50

292 2. Add for machine mixing of concrete. 1 cum 37.50

293 3.Add where the power is available for operating the mixer, the rate is,

1 cum 24.50

294 A I White washing and colour banding for guard and guide stones including cost of materials

each 4.90

295 B I Screening sand and gravel 1 cum 4.80

296 B 2 Screening chips and metal 1 cum 10.20

297 C 1 Removing and refixing Hectometre or Demarcation stones

each 6.20

CENTERING CHARGES

298 L 1 Centering charges for culvert slabs and other structures of 3 mts. span and above

1 cum 829.00

299 L 2 Centering charges for bed blocks and culvert slabs and 1 cum 679.00

Common SSR 2007-08

148

Sl. No

S.S. Item No.


For2007-08

1 2 3 4 5other structures of less than 3 mts. span.

CENTERING CHARGES FOR MINOR AND MAJOR BRIDGE WORKS

300 L3 For mass concrete piers, abutments and steining well curbes, well caps etc.,

1 cum 601.00

301 L 4For RCC piers, abutments, wing wall, steining, well curbs, well caps etc., 1 cum 750.00

302 NOTE:- The rates under L3 and L 4 are applicable to Roads and Buildings and Irrigation structures up to 2 metres width

303 L 5 For RCC deck slabs 1 cum 1430.00

304 L 6 For RCC beams 1 cum 1807.00

305 L 7 For RCC hand rails 1 cum 1987.00

306 L 8 For CC pavements, wearing coats, approach, slabs, guide stone, J. M. stone etc.,

1 cum 143.00

N

Laying and fixing RCC Hume pipes in position including lifting, aligning etc., complete with (fixing ) collars for the following diametres of pipes but excluding cost of materials ( NP2 Class )

307 N 1 250 mm diameter 1 Rm 14.50

308 N 2 300 mm diameter 1 Rm 19.50

309 N 3 450 mm diameter 1 Rm 26.50

310 N 4 600 mm diameter 1 Rm 42.00

311 N 5 750 mm diameter 1 Rm 52.50

312 N 6 800 mm diameter 1 Rm 62.50

313 N 7 1000 mm diameter 1 Rm 70.00

314 N 8 1220 mm diameter 1 Rm 88.00

315 Note:- For NP3 class 50% extra over the rates of NP2. Class may be allowed.

(S ) ROAD WORK ITEMS

PICKING OLD METALLED SURFACE TO DEPTH OF 40 TO 100 mm SPREADING OLD METAL AND NEW METAL SECTIONING INCLUDING EDGEBUNDS AND SUBGRADE ROLLING, SPREADING METAL INCLUDING BLINDAGE OFGRAVEL WATERING WITH AN INITIAL LEAD OF 2 HECTOMETERS AND HAND ROLLER ( 1.5 TO 2 TONNES) ROLLING ETC., INCLUDING BARRICADING, DIVERSION OF TRAFFIC AND WETTING THE NEW CONSOLIDATION FOR A FORTNIGHT COMPLETE

( For a compact thickness )

1 (I ) HARD METAL

316 A 40 mm thickness 10 sqm 47.00317 B 50 mm thickness 10 sqm 49.50318 C 75 mm thickness 10 sqm 55.00

Common SSR 2007-08

149

Sl. No

S.S. Item No.


For2007-08

1 2 3 4 5319 D 100 mm thickness 10 sqm 59.00

1 (ii ) ( For compact thickness of soft metal )

320 A 50 mm thickness 10 sqm 37.00321 B 75 mm thickness 10 sqm 42.00

322 C 100 mm thickness 10 sqm 46.50

323 2 Picking 5 to 100 mm old metalled surface and sectioning 10 sqm 17.50

324 3 Picking gravelled surface 25 mm deep and levelling and sectioning

10 sqm 5.00

325 4 Picking the existing B.T. surface and removal of chips 10 sqm 18.50

326 5

Picking old metalled surface to a depth of 40 to 100 mm and spreading metal including watering with an initial lead of 2 Hectometres and rolling with power rollers watering and spreading gravel for blindage and power roller rolling including hire chages of power roller( 8 to 10 T ) barricading and diversion of traffic and wetting the new consolidation for a fortnight(for compacted thickness of )

HARD METAL

327 5 (a) 40 mm thick ness 10 sqm 119.00

328 (b) 50 mm thick ness 10 sqm 135.00

329 (c ) 75 mm thick ness 10 sqm 149.00

330 (d ) 100 mm thick ness 10 sqm 159.00

331 (e) 150 mm thick excluding hire charges 10 sqm 287.00

Spreading gravel watering with an initial lead of 2 hectometres and power roller ( 8 to 10 T ) rolling excluding hire charges of power roller and barricading etc., ( for a compact thickness of )

332 6a 50 mm thickness 10 sqm 22.00

333 B 75 mm thickness 10 sqm 29.00

334 C 100 mm thickness 10 sqm 46.50

335 D 150 mm thickness 10 sqm 52.50

336 7aBlinding the road surface 6 mm thick with gravel or sand available at site after remaining loose stones including watering.

10 sqm 1.30

337 B -do- without watering 10 sqm 1.20

338 8a Blinding the road surface 6 mm thick with gravel or sand dug from road site including watering.

10 sqm 2.40

339 B -do- without watering 10 sqm 1.90

340 Spreading gravel sand including watering and roller rolling ( for compacted thickness of )

Common SSR 2007-08

150

Sl. No

S.S. Item No.


For2007-08

1 2 3 4 5

341 9a -do- 6mm to 20 mm thick 1 cum 33.50

342 B -do- from 20 to 25 mm thick 1 cum 29.00

343 C -do- from 25 to 40 mm thick 1 cum 27.50

344 D -do- from 40 to 50 mm thick 1 cum 25.50

345 10Picking 50 to 100 mm Old metalled surface, spreading metal and blindage watering tamping for patch repairs ( labour only )

10 sqm 24.00

346 11 Picking old metalled surface 50 to 100 mm deep spreading gravel watering and tamping (labour only)

10 sqm 12.00

347 12 Levelling ruts and tamping gravelled roads 10 sqm 2.90

348 13 Levelling ruts and tamping metalled roads 10 sqm 5.10

349 14 Spreading gravel or sand including watering and rolling with hand roller irrespective of thickness in layer

10 cum 203.00

350 15(i)Carrying for water for WBM consolidation metal and blindage of 40 to 150 mm thickness for every one hectometre beyond initial lead of 2 hectometres

10 sqm 2.90

(ii)

Rate towards the cost of water to be consumed for Cement Concrete Roads(including curing) under Greater Hyderabad Municipal Corporation limits only, subject to issue of certificate by the concerned Executive Engineer incharge of the work that water required for the work is to be purchased from other source.

1 Sqm 8.00

351 Gelatin(For MORTH data,for works of state & national high ways only)

Per Kg 50.00

352 Electric Detonators(For MORTH data,for works of state & national high ways only)

each 2.00

353 Hot applied thermoplastic compound(For MORTH data,for works of state & national high ways only)

Per Litre 169.00

354 Reflectionising glass beads of 2 mm thick(For MORTH data,for works of state & national high ways only)

Per Kg 56.00

355 Road marking paint confirming to IS 164(For MORTH data,for works of state & national high ways only)

Per Kg 141.00

BAILING OUT WATER CHARGES FOR CD & CM WORKS (WHEREVER REQUIRED)

356 I 14 For earth work excavation for foundations below low water level

1 cum 100.00

357 I 15 For cement concrete for foundation below low water level 1cum 100.00

358 n Labour charges for laying filters with coarse aggregate. 1 cum 40.00

359 o Labour charges for laying filter with sand. 1 cum 19.00

Common SSR 2007-08

151

BUILDING , SANITARY

ANDWATER SUPPLY

ITEMS

(The S.S. Rates will be finalized by the Committee constituted vide G.O.Rt.No.471 T.R & B(R1) Department Dated 20-4-2007)

Common SSR 2007-08

152

PUBLIC HEALTH ITEMS

Common SSR 2007-08

153

Public Health Items

PUBLIC HEALTH ITEMS

S.No. Description UnitSS Rate

for2007-08

1 2 3 4

1 RATES OF LABOUR (SKILLED WORKMEN)

1. Caulkar Per Day

As per Common SSR

2. Plumber 1st Class Per Day

3. Plumber 2nd Class Per Day

4. Sewer Cleaner Per Day

5. Well Sinker Per Day

6. Pipe line Fitter 1st Class Per Day

7. Pipe line Fitter 2nd Class Per Day

8. Pump Driver Per Day

9. Bore Mechanic Per Day

10. Light Vehicle Driver Per Day

Note:The rate at relevant item in common SSR is applicable for occasional employment

2 RATES FOR EARTH WORK :

a.Earth work excavation in all soils for pipe lines, for drainage and water supply, where the depth is 1.5 times more than the width.

As Per Common SSR b.

Earth work excavation in all soils for pipe lines, for drainage and water supply, where the depth is less than 1.5 times the width.

c. Earth work excavation in all soils for open trenches, for valve pits, inspection chambers, etc.

3. a.

Excavation of pipe line trenches for drainage and water supply in rock requiring blasting with initial lead and lift including cost of blasting materials where the depth is 1.5 times more than the width, in places where there is no habitation.

As Per Common SSR

b.

Excavation of pipe line trenches for drainage and water supply in rock requiring blasting with initial lead and lift including cost of blasting materials where the depth is less than 1.5 times the width, in places where there is no habitation.

c.Cutting rock for pipe line trenches by hammers, nuckles and chisels including stacking where the depth is 1.5 times or more than the width.

d.Cutting rock for pipe line trenches by hammers, nuckles and chisels including stacking where the depth is less than 1.5 times the width.

e.Cutting rock for works other than pipe lines trenches by hammers, nuckles and chisels including stacking.

f. For controlled blasting at restricted places

As per Common material and work items (i.e. item no. 19a.iii & iv of S.No.256)

Common SSR 2007-08

154

Public Health Items


for2007-08

1 2 3 4NOTE :- Rock should be measured in solids. In case it is not possible, stacks should be made in which case 40% for voids to be deducted from the stack measurements.

4

Loading or unloading materials such as C.I. Pipes, PVC Pipes, AC Pressure Pipes, DI Pipes, SW Pipes, PVC Pipes, A.C/Specials less than 300 mm dia upto 4 m in length including stacking.

a. C.I. Pipes/D.I. Pipes and fittings Per Tonne 64.20

b. A.C. Pipes & Specials Per Tonne 53.60

c. Stoneware pipes & Specials Per Tonne 53.80

d. P.V.C. Pipes and fittings Per Tonne 52.90

5

Loading or unloading materials such as C.I. Pipes, DI pipes, SW pipes, AC pressure pipes & fittings/ specials from 300 mm to 600 mm dia upto 4 m in length including stacking.



c. Stoneware pipes & Specials Per Tonne 73.40

6

Loading or unloading materials such as C.I. Pipes, DI pipes, PVC pipes, AC pipes less than 300 mm dia, above 4 m in length including stacking.



c. P.V.C. Pipes and fittings Per Tonne 72.40

Note:- For loading and unloading the above materials at Railway Stations, the rates may be adopted based on the competitive quotations or the hammalae charges if prevailing

7

Loading or unloading materials such as C.I. Pipes, DI pipes, AC pipes from 300 mm to 600 mm above 4 m in length including stacking.



8. a.

Lowering the C.I. Pipes, D.I. Pipes and fittings with S/S ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/85.DIAMETER OF PIPE : (S/S Pipes) in mm :

80 Per Metre 14.40

100 Per Metre 14.40

125 Per Metre 14.40

150 Per Metre 14.40

Common SSR 2007-08

155

Public Health Items


for2007-08

1 2 3 4180 Per Metre 16.60

200 Per Metre 18.60

225 Per Metre 19.80

250 Per Metre 21.00

300 Per Metre 27.10

350 Per Metre 48.70

380 Per Metre 49.30

400 Per Metre 51.50

450 Per Metre 60.10

500 Per Metre 64.80

530 Per Metre 73.70

560 Per Metre 80.70

600 Per Metre 86.10

650 Per Metre 89.20

680 Per Metre 94.70

700 Per Metre 104.80




1000 Per Metre 203.30

1100 Per Metre 241.60

1200 Per Metre 283.40

8. b.

Lowering the C.I. Pipes, D.I. Pipes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/85.

DIAMETER OF PIPE : (D/F Pipes) in mm :80 Per Metre 17.60

100 Per Metre 17.60

125 Per Metre 17.60

150 Per Metre 18.40

180 Per Metre 18.80

200 Per Metre 20.60

225 Per Metre 22.00

250 Per Metre 23.40

300 Per Metre 29.90

350 Per Metre 53.60

380 Per Metre 55.20

400 Per Metre 59.30

450 Per Metre 65.90

500 Per Metre 68.90

Common SSR 2007-08

156

Public Health Items


for2007-08

1 2 3 4530 Per Metre 76.90

560 Per Metre 82.70

600 Per Metre 90.10

650 Per Metre 92.40

680 Per Metre 99.90





1000 Per Metre 228.50

1100 Per Metre 268.10

1200 Per Metre 312.40

9. a.

Jointing the C.I. / DI Pipes & fittings with S/S ends excluding cost of jointing materials such as lead or lead wool and hemp yarn but including sundries such as cost of fuel for melting lead, filling with water, with a water lead upto 500 m and testing to required pressure etc, complete as BIS No.3114/85

DIAMETER OF PIPE : (S/S Pipes) in mm :

80 Each Joint 46.80

100 Each Joint 50.20






















Common SSR 2007-08

157

Public Health Items


for2007-08

1 2 3 41000 Each Joint 558.50



9. b.

Jointing the C.I. Pipes, D.I. Pipes & fittings with Rubber Gasket, excluding the cost of the gasket but including all sundries filling with water with a water lead upto 500 m and testing to required pressure etc., complete as per BIS No.3114/85.DIAMETER OF PIPE : in mm :

80 Each Joint 43.30


























10

Jointing the C.I. Pipes, fittings and valves with flanged ends excluding cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85.DIAMETER OF PIPE : in mm :80 Each Joint 55.10

Common SSR 2007-08

158

Public Health Items


for2007-08

1 2 3 4100 Each Joint 58.70

























11a

Lowering the RCC plain ended pipes carefully into the trench laying them true to alignment and gradient, jointing RCC pipes with cement joints including curing, the cost of jointing materials i.e., Cement Mortar (1:1.5), hemp yarn etc., and testing including filling with water with a water lead upto 500 mts as per BIS No. 783/85 Per every 25mm dia

Per Metre 8.90

11b

Lowering the RCC S/S pipes carefully into the trenches, laying them true to the alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 metres excluding cost of rubber rings as per BIS No.783/85 per every 25 mm dia

Per Metre 5.50

12

Laying, jointing of G.I. / PVC/HDPE pipes and specials/fittings including excavation upto 0.5 m depth in all soils except rock requiring blasting and re-filling trenches after laying and jointing pipes.

A G.I. PIPES :

Common SSR 2007-08

159

Public Health Items


for2007-08

1 2 3 4DIA in mm 50 Per Metre 14.8040 Per Metre 14.8032 Per Metre 13.7025 Per Metre 13.7020 Per Metre 12.3015 Per Metre 12.30

BPVC/HDPE pipes as per BIS No.7634 part-III/75 for PVC and BIS No.7634 part-II/75 for HDPE pipes.

DIA in mm 50 Per Metre 13.7040 Per Metre 13.7032 Per Metre 12.5025 Per Metre 12.5020 Per Metre 11.50NOTE :- (i) The above rates are applicable for the works in District only.(ii) If the depth of excavation is more than 0.5 m separate rates to be worked out.

S.No. Description Unit S S Rate for 2007-08

1 2 3 4 5 6 7

13

Lowering & laying AC pressure pipes in ready made trenches true to alignment and gradient including all sundries but excluding conveyance from source of supply, as per BIS No.6530/72. Dia of Pipes in mm.

Class 10 Class 15 Class 20 Class 25

80 Per Metre 2.65 2.65 2.99 3.68

100 Per Metre 3.34 3.57 4.49 5.52

125 Per Metre 4.26 4.60 5.75 7.25

150 Per Metre 5.29 6.56 8.17 10.24

200 Per Metre 8.28 10.93 13.80 17.60

250 Per Metre 10.70 13.80 17.71 22.31

300 Per Metre 13.92 19.32 25.07 31.97

350 Per Metre 17.14 23.69 30.71 38.64

400 Per Metre 21.16 30.82 40.14 49.80

Common SSR 2007-08

160

Public Health Items

450 Per Metre 25.53 36.23 47.96 60.15

500 Per Metre 31.51 44.97 58.77 73.83

600 Per Metre 44.16 63.83 83.15 106.03


for2007-08

1 2 3 4

14

Jointing AC pressure pipes with AC couplings or CID joints complete with Rubber Rings including filling with water with a water lead upto 500 m and testing to required pressure, etc., complete but excluding cost of jointing materials and conveyance of pipes from source of supply as per B.I.SDIA of Pipes in mm.

80 Each Joint 30.20100 Each Joint 42.10125 Each Joint 42.10150 Each Joint 48.00200 Each Joint 48.00250 Each Joint 54.90300 Each Joint 54.90350 Each Joint 71.60400 Each Joint 71.60450 Each Joint 83.50500 Each Joint 83.50600 Each Joint 95.30

15

Lowering and laying in ready made trenches true to alignment and gradient, jointing and testing of stoneware pipes excluding cost of jointing materials such as cement mortar and hemp yarn as per BIS No. 4127/83.

DIA of Pipes in mm . 100 Per Metre 22.40150 Per Metre 28.20200 Per Metre 31.40225 Per Metre 32.90250 Per Metre 37.60300 Per Metre 43.10400 Per Metre 48.10450 Per Metre 64.50

16

Lowering, laying, jointing & testing to Hydraulic Field test pressure including cost of water with minimum water lead of 500 M (Labour charges only) for PVC pipes excluding the cost of jointing materials. DIA of Pipes in mm .

63 Per Metre 7.90

75 Per Metre 8.40

90 Per Metre 8.50

Common SSR 2007-08

161

Public Health Items


for2007-08

1 2 3 4110 Per Metre 9.10

125 Per Metre 9.50

140 Per Metre 9.80

160 Per Metre 10.10

180 Per Metre 10.60

200 Per Metre 11.30

225 Per Metre 11.80

250 Per Metre 12.30

280 Per Metre 12.90

315 Per Metre 13.60

16 (a)

Lowering, laying, jointing & testing to Hydraulic Field Test pressure including cost of water with minimum water lead of 500 mts (labour charges only) for HDPE pipes excluding the cost of jointing materials.

Outer Dia of pipes in MM

63 Per Metre 18.2075 Per Metre 20.1090 Per Metre 22.10110 Per Metre 25.50125 Per Metre 30.60140 Per Metre 33.00160 Per Metre 36.00180 Per Metre 39.10200 Per Metre 42.20225 Per Metre 46.00250 Per Metre 49.80280 Per Metre 54.40315 Per Metre 108.10355 Per Metre 120.40400 Per Metre 134.20450 Per Metre 149.50NOTE:- For item 9 to 16 the element of testing charges is to be considered as 20% of the combined rate for laying, jointing and testing. This 20% shall be released only after satisfactory testing of the pipe line to the required pressure.

17

Labour charges for lowering and keeping in position of C.I. Sluice valves, reflux valves and scour valves. Dia of Valve in mm.80 Each 23.20

100 Each 30.60

Common SSR 2007-08

162

Public Health Items


for2007-08

1 2 3 4125 Each 40.10

150 Each 47.40

200 Each 87.70

250 Each 118.60

300 Each 179.60

350 Each 309.00

400 Each 379.00

450 Each 496.30

18 a.

Labour charges for fixing Air Valves including boring the mains, threading the bore and fixing nipple etc., complete. Dia of Air valve in mm.

25 Each 63.60

40 Each 72.90

50 Each 77.10

65 Each 82.10

80 Each 90.20

100 Each 105.90

125 Each 164.10

150 Each 179.40

18 b.

Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. Dia of Air Valve in mm .25 Each 63.30

40 Each 72.60

50 Each 76.60

65 Each 81.80

80 Each 89.80

100 Each 105.50

125 Each 163.40150 Each 178.60

19Labour charges for fixing fire hydrants excluding cost of jointing materials.

65 mm Each 72.20

80 mm Each 89.90

20

Uprooting C.I./ DI Pipes by melting the lead, loosening the joints, scraping the pipes, hoisting and keeping within a lead of 10 m but excluding earth work excavation and refilling. Dia of Pipes in mm.80 Per Metre Observed data only

Common SSR 2007-08

163

Public Health Items


for2007-08

1 2 3 4100 Per Metre125 Per Metre150 Per Metre180 Per Metre200 Per Metre225 Per Metre250 Per Metre300 Per Metre350 Per Metre400 Per Metre450 Per Metre500 Per Metre600 Per Metre

21

Uprooting of RCC pipes including breaking the collars, loosening the joint, scraping the pipes, hoisting and keeping within a lead of 10 m but excluding earthwork excavation and refilling.

Per Metre observed data only

22Removing GI/PVC/HDPE pipes and specials/ fittings and clearing.Dia of Pipes in mm

50 Per Metre 50% of data of laying & jointing of

GI/ PVC/ HDPE pipes and fittings of relevant PH item.

40 Per Metre30 Per Metre25 Per Metre20 Per Metre15 Per Metre

23Cutting C.I./ DI Pipes without water in mains.Dia of pipes in mm.80 Each cut 34.70

100 Each cut 34.70

125 Each cut 34.70

150 Each cut 34.70

180 Each cut 39.70

200 Each cut 39.70

225 Each cut 39.70

250 Each cut 57.20

300 Each cut 57.20

350 Each cut 79.60

380 Each cut 87.30

400 Each cut 91.10

450 Each cut 113.20

500 Each cut 136.00

530 Each cut 147.90

560 Each cut 159.70

Common SSR 2007-08

164

Public Health Items


for2007-08

1 2 3 4600 Each cut 181.10

680 Each cut 204.40

24Cutting A.C. Pipes without water in mains.Dia of pipes in mm.80 Each cut 14.10100 Each cut 14.10

125 Each cut 14.10

150 Each cut 14.10

200 Each cut 14.80

250 Each cut 24.00

300 Each cut 24.00

350 Each cut 30.10400 Each cut 33.40450 Each cut 40.90500 Each cut 45.50

600 Each cut 50.90

25Drilling and tapping CI/ DI Main and fixing brass screw down ferrule and plug.10 mm to 20mm Each Tapping 69.30

25 mm to 40mm Each Tapping 82.70

26Cutting road surface including stacking of excavated materials for pipe line trench work.a) Cutting open B.T. road surface (as well as asphalt concrete upto 75 mm thick) including water bound macadam

10 Sqm215.70

b) Cutting open C.C. road surface 1 Cum 600.00

c) Cutting open water bound macadam road including soiling 1 Cum

73.40

27 Bailing out water.(For PH item)

a) Bailing out water from the pipe line trenches with oil engine driven pumpsets, including hire charges, fuel charges and wages for Driver and Helper.

HP/Hour

16.40

b) Bailing out water from the pipe line trenches with Electric Driven pumpset including hire charges, current charges and wages for Driver and Helper.

HP/Hour 12.90

NOTE:- The rate is payable on the total H.P. hours ignoring fractions less than 0.5 HP hour and rounding off 0.5 HP hour or more to the next higher integer.

28Shoring and strutting of trenches for water and sewer main.

a) Single Staging from (0 to 2.5 Mts.) 10 Sqm of Shoring area

656.70

Common SSR 2007-08

165

Public Health Items


for2007-08

1 2 3 4b) Double staging from (2.5 m to 4.5 Mts.) 10 Sqm of

Shoring area887.90

29Barricading, hoarding, lighting and watching etc., for water supply and sewerage works for trenches.

10 RM 37.10

30

Excavation of trenches for infiltration galleries, syphon lines and connecting mains in all soils under water including all leads, lifts, shoring, strutting, bailing out water and removal of shoring and strutting materials, after completion of pipe line work.

a) 0 to 1 m deep under water. 10 Cum 5257.40b) 1 to 2 m deep under water. 10 Cum 7531.20c) 2 to 5 m deep under water. 10 Cum 11305.10d) Beyond 5 m deep under water for every additional 1 m depth over item 'c' 10 Cum 2159.90

NOTE:- The above rates do not include rock requiring blasting or chiselling

31

Laying and jointing glazed stoneware pipes including loose jointing with cement fillets and all other incidental charges for infiltration gallery, inclusive of bailing out water by pumping to keep the trench reasonably dry to facilitate the work excluding cost of stoneware pipes

200 mm to 400 mm Per Metre 258.30

32

Laying and jointing perforated RCC pipes inclusive of bailing out water and jointing with cement fillets and all other incidental charges for infiltration gallery inclusive of bailing out water by pumping to keep the trench reasonably dry to facilitate the work excluding cost of perforatrd pipes and collars.

Per every 25mm Dia. Per Metre 17.40

33

Centring and scaffolding charges for RCC members including all materials and labour charges for forming and dismantling a) for R C C Elevated Service Reservoir of staging up to 15 metre below L W L.

1) Slabs for thickness (150 mm to 300 mm)

One Sqm of Centering area

1084.40

2) Slabs for thickness above (300 mm) 2167.90

3) Side walls curved surfaces. 819.604) Side wall straight surfaces. 729.105) Dome. 887.906) Roof Slab. 546.80

Common SSR 2007-08

166

Public Health Items


for2007-08

1 2 3 47) Column footing. 597.808) Column braces and beams 365.609) Circular braces, ring beams & circular column.

400.60

Note:- For RCC ELSR of staging above 15 m,the percenatage increase in these rates shall be as follows:15 – 18 m -- 6%18 – 21m -- 12%21 – 24 m --18%24 m and above -- 24%

b) For Ground level works :-

1) Slabs 1 SqmAs per Common

SSR2) Beams & Lintels 1 Sqm3) Sun shades 1 Sqm4) RCC vertical walls of plane surface upto 3 m height such as ground level tanks clarifiers and sludge digesters etc.

1 Sqm 393.00

5) RCC vertical walls of circular faces upto 3 m heights 1 Sqm 501.40

NOTE: Scaffolding for every extra height of 1 m or part thereof but not less than 0.5 m 10 Sqm

34 Lift or delift of materials :

a) Lifting of cement concrete for RCC elevated reservoir. For every 3 m height or part thereof over the initial lift of 5 m

1 Cum 62.30

b) Delifting the materials such as stones, concrete etc., for concrete below ground level for construction of masonry ground level reservoirs, construction of masonry ground level reservoirs, inspection wells, test wells and sump wells etc., for every 2 m depth or part thereof beyond the initial depth of 4 meters from ground level

1 Cum 18.90

35 Labour charges for fixing ventilating shafts complete with all accessories.

Each 251.80

36Labour charges for fixing water closets including fixing of foot rests (for all sizes) Each

Relevant Common SSR item

37Labour charges for fixing of flushing cistern including fixing of flush pipes, lead pipe, jointing etc., complete

Each

38Labour charges for fixing wash hand basin including fixing of inlet and waste pipe connections etc., complete

Each

39 Fixing urinal with inlet and waste pipe connections etc., complete.

Each

40Refilling the trench for pipe line with excavated earth including watering and tamping etc., complete

10 Cum

Common SSR 2007-08

167

Public Health Items


for2007-08

1 2 3 4

41 aExtra allowance for isolated scattered works viz., valve pits, public fountains, meter pits and manholes etc., complete.

Each25% extra over the cost of chamber.

41 b

Repairs to the existing mains, interconnections, replacement of valves/specials etc., including the cutting ,jointing, bailing out of water, drying, earth work execavation etc., complete.

100% extra over the cost of work

42Removal of wet silt and sludge from sullage drains with aid of baskets and vessels. 10 Cum 656.30

43Conveyance of C.I./ DI Pipes, C.I. Special excluding loading, unloading and stacking.

As per separate sheet enclosed

44Conveyance of RCC pipes including loading, unloading and stacking.

Deleted

45Conveyance of Stoneware pipes inlcuding loading unloading and stacking.

As per local competitive quotations

46Conveyance of A.C. pressure pipes and accessories including loading, unloading and stacking.

As per local competitive quotations

47 Conveyance of PVC pipes and accessories including loading, unloading and stacking.

Deleted

48

Well sinking in sandy and other loose soils under water either by manual labour, divers, or dredgers, weighting the top of staining to assist sinking etc., including dewatering and other incidental charges such as hire charges for mechanical equipment etc,complete up to 4 m internal dia.Upto 2 m below GL/m Per metre 10603.70

From 2 to 4 m below GL/m Per metre 12193.50

From 4 to 6 m below GL/m Per metre 13783.30From 6 to 8 m below GL/m Per metre 15541.90From 8 to 10 m below GL/m Per metre 17180.20Note:-Below 10 m for every metre depth or part thereof add Rs.250/- per m. For higher dia, observed data is to be prepared and got approved

49

Sinking in Hard strata other than rock but in soils like limestone, gravel, clay under water including, pumping dewatering, hire charges for mechanical equipment etc., complete.

Deleted

50 Open well excavation in various soils. As per Common SSR

51Rates for OHSRs/ELSRs including fixtures with a staging of 15 m without seismic analysis.

a Capacity in 500 Kilo litres Per litre 6.19

b Capacity in 1000 Kilo litres Per litre 5.61

c Capacity in 1500 Kilo litres Per litre 5.29

Common SSR 2007-08

168

Public Health Items


for2007-08

1 2 3 4

d Capacity in 2000 Kilo litres Per litre 5.06

e Capacity in 2500 Kilo litres Per litre 4.81

NOTE: -1) The above rates are applicable for Elevated Level Services Reservoirs / OHSRs with RAFT FOUNDATION and a rate of Rs.4,140/- per tonne for cement and Rs.29,100/- per tonne for steel

2) For stagings less than 15 m , the rate shall be reduced by Rs.0.02 paise per litre per every meter of difference in staging.3) For stagings above 15 m, the rate shall be increased by Rs.0.05 paise per litre per every meter of additional staging.4) For every Rs.100/- increase /decrease in price of cement per tonne increase/ decrease the rate by 0.7% 5) for every Rs.1000/- increase/ decrease in price of steel per tonne, increase/decrease the rate by 2%6) Rate inclusive of three coats of epoxy paint to inner surface of the reservoir including roof dome.7) For intermediate ranges proportional rates may be adopted

8) The above rates be adopted for estimate purposes for construction of ELSR for a finished work including 2 coats of snowcem painting for external surfaces, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections but excluding cost of pipes, bends and valves as per departmental designs and drawings

9) The above rates are applicable for wind pressure upto 350 kg / sq m

10) For tribal/Agency / Rural area, the above rates shall be increased by 5%11) If the ELSR is to be disgned for seismic forces also cost shall be arrived by working out detailed quantities based on the design & difference to be paid extra.

12) Fixtures include.

a) A balcony of 0.75 m width at floor slab level/ middle ring beam level / top ring beam level with RCC post with GI pipe hand railing.

b) C.I. Manhole frame and cover : 0.60 x 0.6 m size 2 Nos.c) RCC Mosquito proof ventilators.

d) RCC Finial - 1 No.

e) RCC precast ladders 0.45 m wide - 2 Nos.f) RCC dog legged stair case of 1.00 m width with hand railing – 1 No.

Common SSR 2007-08

169

Public Health Items


for2007-08

1 2 3 4g) RCC hand railing 0.75 m height alround at floor level and roof level.h) Water level indicator of approved pattern - 1 No.i) Lightening arrestor with all its accessories complete including earthing - 1 No.

52Rates for OHSRs/ELSRs including fixtures with a staging of 15 m without seismic analysis.

a 40,000 Litres capacity Per litre 15.08

b 40,001 to 60,000 Litres capacity Per litre 11.45

c 60,001 to 1,00,000 Litres capacity Per litre 10.59

d 1,00,001 to 2,00,000 Litres capacity Per litre 9.28e 2,00,001 to 3,00,000 Litres capacity Per litre 8.71

f 3,00,001 to 4,00,000 Litres capacity Per litre 7.68

g 4,00,001 to 4,50,000 Litres capacity Per litre 6.67

NOTE: -1) The above rates are applicable for Elevated Level Services Reservoirs / OHSRs with RAFT FOUNDATION and a rate of Rs.4,140/- per tonne for cement and Rs.29,100/- per tonne for steel.

2) For every metre of staging less than 15 m, the rate shall be reduced by Rs.0.02 paise per litre.3) For every metre of staging above 15 m , the rate shall be increase by Rs.0.05 paise per litre.4) For every Rs.100/- increase/decrease in price of cement per tonne increase/decrease the rate by 0.70%5) For every Rs.1000/- increase/decrease in price of steel per tonne increase/decrease the rate by 2%

6) Rate inclusive of three coats of epoxy paint to inner surface of the reservoir including roof dome.7) For intermediate ranges proportional rates may be adopted

8) The above rates be adopted for estimate purposes for construction of ELSR for a finished work including 2coats of snowcem painting for external surfaces lettering, fixing of all required fixtures, pipes, bends, valves etc., for pipe connections, but excluding cost of pipes, bends and valves, as per departmental designs and drawings

9) The above rates applicable for wind pressures upto 350 kg / sq m. If the ELSR / OHSR is to be designed for seismic forces also, cost shall be arrived by working out detailed quantities based on the designs.

Common SSR 2007-08

170

Public Health Items


for2007-08

1 2 3 410) For Tribal/Agency/ Rural area, the above rates shall be increased by 5%

11)If the ELSR is to be designed for seismic forces also, cost shall be arrived by working out detailed quanitites based on the design & difference to be paid extra.12) Fixtures include :

a) RCC or Aluminium ladder inside 0.45 m wide.b) spiral staircase on the outside.

c) Lightening arrestor, including conductor and earthing etc.

d) RCC ventilators with copper or stainless steel fly proof mesh.e) RCC finial ventilators with copper or stainless steel fly proof meshf) Manholes frame and cover 0.75x0.75 m with frame as per IS specifications (light duty) – 2 Nosg) Railing with 32 mm dia G.I. Pipes (A class) in two rows around OHSR fixed in RCC (1:2:4) posts of size 100x75x75 mm with 1.5 m intervals around periphery on top of the OHSR for smaller capacities.h) Water level indicator of good quality with ebonite/ copper float approved pattern- 1 No

53Construction of Rapid Gravity Filtration Plant including civil, mechanical and electrical, trial running etc., complete.1) 2.0 Mld Per litre 1.54

2) 5.0 Mld Per litre 1.42



5)30.00 Mld and above Per litre 1.03

NOTE :-

a) The above rates are applicable with cement @ rate of Rs.4,140/-MT and steel of 29,100/MT.b) For every Rs.100/MT increase/decrease the price of cement increase/reduce the rate by 0.7%.c) For every Rs.1000/MT increase/decrease in price of steel increase/reduce the rate by 2%.d) For rural areas an extra allowance of 5% shall be given on basic rate.e) In case of raft foundation, additional cost involved due to provision of raft foundation shall be worked out and paid extra.

f) The components of the filtration plant are as follows.

Common SSR 2007-08

171

Public Health Items


for2007-08

1 2 3 4A) Civil Works:(All works of VRCC shall be in M30 design mix)

1)Stilling Chamber.

2) Ventury flume channel with measuring device.3)Flash mixer chamber

4) Clarififlocculator/tube settler & flocculation tanks5) Filter house chemical house,Alumstore,laboratory office room chlorination plant room, toilet etc.6) Wash water tank of suitable capacity.

B)Mechanical Equipment

1)Raw water flow measuring and recording equipment.2)Alum dosing equipment

3)Flash mixer equipment

4)Sludge disposal fittings by gravity

5)Filtration plant euqipment instrumentation and piping.6)Clarifloccualation equipment with rotating bridge arrangeemnt etc.,7)Wash water tank fittings and pumpsets.

8)Air blower with motor and pipe connections.

9)Chlorination equipment and pipe connections10)Lab testing equipment and consumables for one year11) Spares and tools for 2 years.

C) Electrical Equipement

1)Necessary power supply wiring to motors and switches bus bar connections as per I.E. Rules2)Internal wiring and illumination and fittings and fixtures for internal and external lighting exhaust fans, ceiling fans etc.3) Erecting mechanical & Electrical equipment, trial run for 90 days 23.50 hours per day testing the treated water for efficient standards and maintenance of records and imparting training to staff.4)Supply of 6 - sets of completion plans and maintenance manual and brochures.5)Provision towards soil investigation.

NOTE:-The prices of cement and steel will be reviewed and fixed quarterly by B.O.C.E.S will be communicated separately by ENC (IW) I & CAD Dept, Hyderabad

Common SSR 2007-08

172

Public Health Items

PUBLIC HEALTH (PIPES AND SPECIAL)1. S.S.RATES FOR R.C.C. PLAIN ENDED PIPES

Sl. No. Description

1 2

1MANUFACTURE, SUPPLY AND DELIVERY OF R.C.C. PLAIN ENDED PIPES CONFORMING TO B.I.S. 458/2003 AT EX-FACTORY EXCLUDING TRANSPORTATION, TAXES & DUTIES

Size Unit S S Rate For 2007-2008. NP - 2 Class NP - 3 Class NP - 4 Class

80 mm dia Meter 89.42






300 mm dia Meter 242.86 550.00 565.00

350 mm dia Meter 302.15 683.10 697.06

400 mm dia Meter 348.73 755.94 772.10

450 mm dia Meter 427.36 864.80 873.22

500 mm dia Meter 469.42 990.99 1078.48

600 mm dia Meter 693.81 1411.62 1672.40

700 mm dia Meter 889.30 1753.16 2239.41

800 mm dia Meter 1092.85 2316.81 2925.87

900 mm dia Meter 1374.40 2909.04 3642.61

1000 mm dia Meter 1670.15 3612.99 4975.82

1100 mm dia Meter 1985.35 4260.09 5767.62

1200 mm dia Meter 2364.45 5017.21 6741.77

1400 mm dia Meter 3216.94 6484.36 9327.78

1600 mm dia Meter 3731.71 8412.50 11229.00

1800 mm dia Meter 4889.34 11148.25 15053.33

Note : All the prices are ex-works, Excise duty, CST/VAT extra as applicable at the time of supply. The above rates of RCC Plain ended pipes are based on the following raw materials cost.Cement. Rs.4,140/- per MT (including all taxes and freight).Steel (M.S. Rods) - Rs.28,200/- per MT. (including all taxes and freight).The rates may be revised depending upon the increase/decrease in the cost of raw materials as per the following method.For every Rs.100/- per MT increase/decrease in the cost of cement, increase/decrease the rate by 0.79%.For every Rs.1000/- per MT increase/decrease in the cost of steel, increase/decrease the rate by 1.495%.

Common SSR 2007-08

173

Public Health Items

2. S.S.RATES FOR R.C.C. COLLARS

Sl.No.

Description

1 2

1

MANUFACTURE, SUPPLY AND DELIVERY OF R.C.C. COLLARS CONFORMING TO B.I.S. 458/2003 (RATE PER EACH COLLAR) SUITABLE FOR R.C.C. PLAIN ENDED PIPES INCLUDING TRANSPORTATION BUT EXCLUDING TAXES & DUTIES

Size Unit S S Rates for 2007-2008. NP - 2 Class NP - 3 Class NP - 4 Class

80 mm dia Each 24.40






300 mm dia Each 56.90 80.00 80.00

350 mm dia Each 70.10 99.27 99.27

400 mm dia Each 75.84 112.89 112.89

450 mm dia Each 120.30 150.08 150.08

500 mm dia Each 137.96 178.33 178.33

600 mm dia Each 183.39 235.54 235.54

700 mm dia Each 239.75 316.30 316.30

800 mm dia Each 336.49 400.43 400.43

900 mm dia Each 403.80 467.73 467.73

1000 mm dia Each 471.09 585.50 585.50

1100 mm dia Each 577.09 740.29 740.29

1200 mm dia Each 701.60 927.05 927.05

1400 mm dia Each 905.18 1174.38 1174.38

1600 mm dia Each 1154.19 1505.83 1505.83

1800 mm dia Each 1199.62 1939.91 1939.91

Note: Excise duty, CST/VAT extra as applicable at the time of supply. The above rates of RCC Collars suitable to plain ended pipes are based on the following raw materials cost.Cement. Rs.4,140/- per MT (including all taxes and freight).Steel (M.S. Rods) - Rs.28,200/- per MT. (including all taxes and freight).The rates may be revised depending upon the increase/decrease in the cost of raw materials as per the following method.For every Rs.100/- per MT increase/decrease in the cost of cement, increase/decrease the rate by 0.79%.For every Rs.1000/- per MT increase/decrease in the cost of steel, increase/decrease the rate by 1.495%.

Common SSR 2007-08

174

Public Health Items

3. S.S.RATES FOR R.C.C. S/S PIPES (Non Pressure)

Sl. No.

Description

1 2

1

MANUFACTURE, SUPPLY AND DELIVERY OF R.C.C. SOCKET AND SPIGOT PIPES CONFORMING TO B.I.S. 458/2003 AT EX-FACTORY (RATE PER METER OF EFFECTIVE LENGTH) EXCLUDING TRANSPORTATION, TAXES & DUTIES.

Size Unit S.S Rates for 2007-2008 NP - 2 Class NP - 3 Class NP - 4 Class

80 mm dia Meter

113.03

100 mm dia Meter

124.71

150 mm dia Meter

151.02

200 mm dia Meter

184.14

225 mm dia Meter

200.71

250 mm dia Meter

214.37

300 mm dia Meter

300.73 720.00 764.00

350 mm dia Meter

385.65 922.50 939.47

400 mm dia Meter

426.77 1022.78 1041.29

450 mm dia Meter

530.66 1129.21 1138.48

500 mm dia Meter

610.88 1291.20 1402.27

600 mm dia Meter

860.79 1809.53 1863.52

700 mm dia Meter

1115.34 2309.35 2421.37

800 mm dia Meter

1430.04 3053.45 3164.81

900 mm dia Meter

1804.89 3838.13 3974.70

1000 mm dia Meter

2189.02 4347.20 4746.63

1100 mm dia Meter

2573.14 5127.79 5482.36

1200 mm dia Meter

2920.25 6048.74 6415.85

1400 mm dia Meter

4146.99 8011.01 9093.76

1600 mm dia Meter

5129.32 10394.41 10960.76

1800 mm dia Meter

5777.24 13772.83 14698.73

Note: All the prices are ex-works, Excise duty, CST/VAT extra as applicable at the time of supply. The above rates of RCC S/S Non-Pressure pipes are based on the following raw materials cost.

Common SSR 2007-08

175

Public Health Items

Cement. Rs.4,140/- per MT (including all taxes and freight).Steel (M.S. Rods) - Rs.28,200/- per MT. (including all taxes and freight).The rates may be revised depending upon the increase/decrease in the cost of raw materials as per the following method.For every Rs.100/- per MT increase/decrease in the cost of cement, increase/decrease the rate by 0.59%.For every Rs.1000/- per MT increase/decrease in the cost of steel, increase/decrease the rate by 1.00%

Common SSR 2007-08

176

Public Health Items

4. S.S.RATES FOR R.C.C. S/S PIPES (Pressure)

Sl.No.

Description

1 2

1

MANUFACTURE, SUPPLY AND DELIVERY OF R.C.C. SOCKET AND SPIGOT PIPES CONFORMING TO B.I.S. 458/2003 EX-FACTORY (RATE PER METER OF EFFECTIVE LENGTH) EXCLUDING TRANSPORTATION, TAXES & DUTIES.

Size Unit S.S. Rates for 2007-2008 P1 - Class P2 - Class P3 - Class

80 mm dia Meter 139.40 157.07 178.88

100 mm dia Meter 158.07 187.68 218.10

150 mm dia Meter 217.16 281.11 345.10

200 mm dia Meter 252.67 362.06 478.16

225 mm dia Meter 284.61 411.34 533.49

250 mm dia Meter 311.47 441.87 562.01

300 mm dia Meter 420.87 636.14 793.69

350 mm dia Meter 523.65 882.32 1144.52

400 mm dia Meter 620.91 1167.13 1508.66

450 mm dia Meter 668.51 1383.34 1862.41

500 mm dia Meter 883.80 1508.99 2122.53

600 mm dia Meter 1210.42 2248.34 2954.24

700 mm dia Meter 1609.09 2968.42 3763.40

800 mm dia Meter 2015.76 3544.68 4562.62

900 mm dia Meter 2435.26 4182.76 -

1000 mm dia Meter 3064.49 4793.83 -

1100 mm dia Meter 3674.49 - -

1200 mm dia Meter 4318.14 - -

Note: All the prices are ex-works, Excise duty, CST/VAT extra as applicable at the time of supply. The above rates of RCC S/S Pressure pipes are based on the following raw materials cost.Cement. Rs.4140/- per MT (including all taxes and freight).Steel (M.S. Rods) - Rs.28,200/- per MT. (including all taxes and freight).The rates may be revised depending upon the increase/decrease in the cost of raw materials as per the following method.For every Rs.100/- per MT increase/decrease in the cost of cement, increase/decrease the rate by 0.625%.For every Rs.1000/- per MT increase/decrease in the cost of steel, increase/decrease the rate by 1.63%.

Common SSR 2007-08

177

Public Health Items

5. S.S. RATES FOR RUBBER RINGS TO SUIT R.C.C. S/S PIPES

Sl. No.

Description

1 2

1

MANUFACTURE, SUPPLY AND DELIVERY OF RUBBER RINGS TO SUIT R.C.C. SOCKET AND SPIGOT PIPES CONFORMING TO B.I.S. 5382/ 1985 (RATE PER EACH RUBBER RING) INCLUDING TRANSPORTATION BUT EXCLUDING TAXES & DUTIES.

Size Unit S.S.Rates for 2007-2008 NP - 2 Class NP - 3 Class NP - 4 Class







300 mm dia Each 48.51 62.00 62.00

350 mm dia Each 56.17 74.04 74.04

400 mm dia Each 61.27 84.25 84.25

450 mm dia Each 70.21 95.74 95.74

500 mm dia Each 91.91 109.78 109.78

600 mm dia Each 119.99 159.56 159.56

700 mm dia Each 164.67 191.48 191.48

800 mm dia Each 208.07 232.32 232.32

900 mm dia Each 260.41 314.02 314.02

1000 mm dia Each 305.08 379.12 379.12

1100 mm dia Each 367.63 485.07 485.07

1200 mm dia Each 587.19 610.17 610.17

1400 mm dia Each 645.91 671.44 671.44

1600 mm dia Each 804.20 819.51 819.51

1800 mm dia Each 1002.05 1046.73 1046.73

2

MANUFACTURE, SUPPLY AND DELIVERY OF RUBBER RINGS TO SUIT R.C.C. SOCKET AND SPIGOT PIPES CONFORMING TO B.I.S. 5382/ 1985 (RATE PER EACH RUBBER RING) INCLUDING TRANSPORTATION BUT EXCLUDING TAXES & DUTIES.Size P1 - Class P2 - Class P3 – Class

80 mm dia Each 12.77 12.77 12.77

100 mm dia Each 15.32 16.59 16.59

150 mm dia Each 26.81 26.81 26.81

200 mm dia Each 31.91 31.91 31.91

225 mm dia Each 34.47 35.74 37.02

250 mm dia Each 39.57 40.85 42.12

300 mm dia Each 48.51 51.06 53.61

350 mm dia Each 56.17 65.10 70.21

400 mm dia Each 61.27 84.25 86.80

Size P1 - Class P2 - Class P3 – Class450 mm dia Each 70.21 97.01 99.57

Common SSR 2007-08

178

Public Health Items

500 mm dia Each 91.91 109.78 114.89600 mm dia Each 119.99 136.59 137.86700 mm dia Each 164.67 180.15 191.48800 mm dia Each 208.07 229.77 229.77900 mm dia Each 260.41 291.04 1000 mm dia Each 305.08 351.04 1100 mm dia Each 367.63 1200 mm dia Each 587.19

Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.

Common SSR 2007-08

179

Public Health Items

6. S.S. RATES FOR CONVEYANCE OF R.C.C. PLAIN ENDED PIPES

Sl.No.

Description

Rate upto 5 Kms Lead

including Loading, unloadin

g and stacking

Rate for every

additional 1 KM lead or

part thereof.

Rate upto 5 Kms Lead including Loading,

unloading and stacking

Rate for every

additional 1 KM lead

or part thereof.

1 2 3 4 5 6

1CONVEYANCE OF R.C.C. PLAIN ENDED PIPES ON ALL WEATHER ROADS INCLUDING LOADING, UNLOADING AND STACKING (per Meter)

NP - 2 Class NP - 3 Class & NP - 4 Class 80 mm dia 1.59 0.08

100 mm dia 1.95 0.10

150 mm dia 2.74 0.16

200 mm dia 3.66 0.20

225 mm dia 4.27 0.24

250 mm dia 4.88 0.29

300 mm dia 7.33 0.37 19.20 0.40

350 mm dia 9.52 0.46 20.76 0.54

400 mm dia 10.99 0.61 24.42 0.79

450 mm dia 14.04 0.79 26.86 0.91

500 mm dia 15.26 0.92 29.30 0.91

600 mm dia 21.98 1.34 43.96 1.95

700 mm dia 28.08 1.95 48.84 2.29

800 mm dia 32.97 1.95 58.61 2.29

900 mm dia 37.85 1.95 76.92 4.27

1000 mm dia 56.17 3.97 92.80 4.27

1100 mm dia 61.66 3.97 100.12 4.58

1200 mm dia 69.60 4.21 112.33 4.58

1400 mm dia 84.25 4.21 152.63 4.83

1600 mm dia 97.68 4.27 183.15 4.83

1800 mm dia 112.33 4.27 244.20 6.76

Common SSR 2007-08

180

Public Health Items

7. S.S. RATES FOR CONVEYANCE OF R.C.C. S/S PIPES

Sl.No.

Description


unloading and

stacking

Rate for every


or part thereof.


unloading and

stacking

Rate for every


or part thereof.

1 2 3 4

1CONVEYANCE OF R.C.C. SOCKET AND SPIGOT PIPES ON ALL WEATHER ROADS INCLUDING LOADING, UNLOADING AND STACKING (per Meter of effective length)

Size NP - 2 & P1 Class NP - 3 & NP - 4 Class80 mm dia 2.02 0.12

100 mm dia 2.32 0.13

150 mm dia 3.24 0.18

200 mm dia 4.15 0.30

225 mm dia 5.01 0.37

250 mm dia 5.62 0.43

300 mm dia 8.30 0.49 22.90 0.68

350 mm dia 10.38 0.61 24.42 0.85

400 mm dia 12.58 0.79 30.53 1.49

450 mm dia 14.41 0.85 33.58 1.52

500 mm dia 16.18 0.91 36.63 1.59

600 mm dia 21.37 1.48 50.06 2.25

700 mm dia 25.95 1.59 67.16 4.48

800 mm dia 36.02 2.44 79.37 4.52

900 mm dia 53.72 4.45 91.58 4.52

1000 mm dia 61.05 4.45 96.46 4.52

1100 mm dia 68.99 4.52 103.79 4.52

1200 mm dia 76.92 4.52 116.00 4.57

1400 mm dia 95.24 4.52 155.07 4.57

1600 mm dia 113.55 4.57 183.15 4.88

1800 mm dia 140.42 4.57 244.20 6.72

P2 - Class P3 - Class80 mm dia 2.02 0.12 2.02 0.12

100 mm dia 2.32 0.13 2.32 0.13

150 mm dia 3.24 0.18 3.23 0.18

200 mm dia 4.51 0.37 6.11 0.40

225 mm dia 6.11 0.44 6.84 0.46

250 mm dia 6.42 0.47 8.06 0.61

300 mm dia 12.21 0.63 14.04 0.73

350 mm dia 15.38 0.85 19.54 0.91400 mm dia 18.32 0.91 26.25 1.49

450 mm dia 23.20 1.42 32.36 1.52500 mm dia 26.25 1.47 39.68 2.13

600 mm dia 34.80 1.54 56.78 2.83700 mm dia 51.28 2.99 83.64 4.52

800 mm dia 68.38 4.27 106.23 4.52

900 mm dia 80.59 4.52 - -

Common SSR 2007-08

181

Public Health Items

1000 mm dia 102.56 4.57 - -8. S.S.RATES FOR A.C. PIPES

Sl.No Description

1 2

1

MANUFACTURE AS PER BIS NO: 1592/2003AS AMENDED FROM TIME TO TIME (MAZZA PROCESS) AND SUPPLY OF AC PRESSURE PIPES DULY MARKED WITH BIS MARK, INCLUDING COST OF MATERIAL, INCIDENTAL HANDLING, LOADING AND PACKING CHARGES BUT ARE EXCLUSIVE OF TRANSPORTATION, UNLOADING, STACKING AT DEPARTMENTAL STORES, EXCISE DUTY, VAT OCTROI AND OTHER GOVT. LEVIES.

Size Unit S.S Rates for 2007-08 Class - 10 Class - 15 Class - 20 Class - 25

80 mm dia Rate/Meter 101.31 101.92 110.25 138.33 100 mm dia Rate/Meter 127.63 133.85 169.36 209.86 125 mm dia Rate/Meter 160.35 175.49 218.44 275.31 150 mm dia Rate/Meter 198.81 248.39 309.27 386.99 200 mm dia Rate/Meter 312.54 413.99 525.26 666.80 250 mmdia Rate/Meter 407.45 523.62 673.76 845.16

300 mm dia Rate/Meter 526.90 735.12 950.71 1211.70 350 mm dia Rate/Meter 647.99 897.93 1166.30 1465.34 400 mm dia Rate/Meter 803.85 1168.75 1522.61 1888.33 450 mm dia Rate/Meter 969.11 1374.93 1820.83 2281.88 500 mm dia Rate/Meter 1197.79 1705.88 2230.74 2802.64 600 mm dia Rate/Meter 1677.24 2422.20 3156.91 4023.76

The above Rates of A.C pipes are based on theCement cost of Rs.4140/- per MT (including all taxes and freight).The Rates may be revised depending upon the increase/decrease in the cost of cement rate as per the following method.For every Rs.100/- per MT increase/decrease in the cost of cement, increase/decrease in the above rate shall be 0.72%.


2

Stores delivery charges for transportation of AC pressure pipes at site of work anywhere in Andhra Pradesh on motorable roads for full truck loads including transit insurance, unloading, and stacking at Departmental stores etc., complete (A.C. couplings and Rubber rings are to be supplied free of transportation charges).

10% on the value of AC

Pressure pipes.

( only on basic price)

Common SSR 2007-08

182

Public Health Items

9. S.S.RATES FOR A.C. COUPLINGS

Sl. No. Description

1 2

1

MANUFACTURE AS PER MANUFACTURERS SPECIFICATION (MAZZA PROCESS) AND SUPPLY OF A.C. COUPLINGS EXCLUDING COST OF RUBBER RINGS TO SUIT AC PRESSURE PIPES INCLUDING COST OF MATERIAL, INCIDENTAL HANDLING, PACKING TRANSPORTATION AND UNLOADING AT SITE TRANSIT RISK BUT EXCLUDING EXCISE DUTY, VAT AND OTHER GOVT. LEVIES.

Size Unit S.S Rates for 2007-08. Class - 10 Class - 15 Class - 20 Class - 25

80 mm dia Rate/Each 52.77 52.77 55.23 63.81

100 mm dia Rate/Each 66.26 68.73 71.18 85.91

125 mm dia Rate/Each 81.00 85.91 93.28 112.91

150 mm dia Rate/Each 93.28 98.18 122.73 152.17

200 mm dia Rate/Each 135.00 181.63 193.91 247.91

250 mmdia Rate/Each 174.26 211.09 265.09 338.72

300 mm dia Rate/Each 216.00 274.90 355.91 456.54

350 mm dia Rate/Each 289.64 358.35 463.90 593.99

400 mm dia Rate/Each 395.17 552.27 721.63 930.26

450 mm dia Rate/Each 468.80 662.72 873.80 1126.62

500 mm dia Rate/Each 559.64 790.35 1057.90 1354.88

600 mm dia Rate/Each 748.63 951.87 1185.53 1516.89

The above Rates of A.C Couplings are based on theCement cost of Rs.4140/- per MT (including all taxes and freight).The Rates may be revised depending upon the increase/decrease in the cost of cement rate as per the following method.For every Rs.100/- per MT increase/decrease in the cost of cement, increase/decrease the rate by 0.72%.


Common SSR 2007-08

183

Public Health Items

10. S.S.RATES FOR RUBBER RINGS TO SUIT A.C. PIPES

Sl. No. Description

1 2

1

SCHEDULE OF RATE FOR SUPLY OF RUBBER RINGS MANUFACTURED AS PER BIS: 5382/1988 WITH BIS MARK EMBOSSED PER EACH SET SUITABLE FOR A.C. COUPLINGS INCLUDING COST OF MATERIAL, INCIDENTAL, HANDLING, PACKING, TRANSPORTATION AND UNLOADING AT SITE TRANSIT RISK ETC., BUT EXCLUDING VAT.

Size Unit S.S. Rates for 2007-08. Class - 5 Class - 10 Class - 15 Class - 20 Class - 25

80 mm dia Each Set 32.26 32.26 32.26 32.26 32.26 100 mm dia Each Set 39.56 39.56 39.56 39.56 39.56 125 mm dia Each Set 51.77 51.77 51.77 51.77 51.77 150 mm dia Each Set 66.11 66.11 66.11 66.11 66.11 200 mm dia Each Set 67.71 67.71 67.71 67.71 67.71 250 mmdia Each Set 78.99 78.99 78.99 78.99 78.99

300 mm dia Each Set 79.25 79.25 79.25 79.25 79.25 350 mm dia Each Set 89.21 89.21 89.21 89.21 89.21 400 mm dia Each Set 108.99 108.99 108.99 108.99 108.99 450 mm dia Each Set 128.77 128.77 128.77 128.77 128.77 500 mm dia Each Set 148.68 148.68 148.68 148.68 148.68 600 mm dia Each Set 168.48 168.48 168.48 168.48 168.48


Common SSR 2007-08

184

11. S.S. RATES FOR PRE-STRESSED (NON-CYLINDER) CONCRETE PIPES

Sl.No.

Description

1 2

1MANUFACTURE, SUPPLY, DELIVERY OF PRE-STRESSED (NON-CYLINDER) CONCRETE PIPES CONFORMING TO IS 784/2001 Ex-factory excluding transportation, taxes & duties.

Size Unit S.S Rates for 2007-08. Rs. Rs. Rs. Rs. Rs. Rs.

6 Kg/cm2 8 Kg/cm2 10 Kg/cm2 12 Kg/cm2 14 Kg/cm2 16 Kg/cm2350 MM DIA Meter 1667 1667 1683 1699 1730 1793

400 MM DIA Meter 1793 1809 1825 1856 1888 1919

450 MM DIA Meter 1903 1919 1935 1982 2029 2076

500 MM DIA Meter 2061 2076 2092 2139 2186 2249

600 MM DIA Meter 2375 2391 2422 2501 2580 2658

700 MM DIA Meter 2910 2926 2973 3052 3162 3256

800 MM DIA Meter 3445 3476 3571 3665 3807 3948

900 MM DIA Meter 3995 4027 4121 4294 4467 4719

1000 MM DIA Meter 4688 4735 4876 5065 5364 5600

1100 MM DIA Meter 5332 5411 5568 5867 6135 6402

1200 MM DIA Meter 5914 6025 6229 6559 6890 7204

1300 MM DIA Meter 8030 8390 8770 9150 9810 10560

1400 MM DIA Meter 9160 9590 10140 10750 11460 11980

1500 MM DIA Meter 10410 10910 11420 12240 13020 13610

1600 MM DIA Meter 11660 12230 12810 14250 14650 15320

2 Cost of laying jointing, testing to Hydrostatic field test pressure including cost of rubber rings, cost of transportation of water and emptying pipe line after completion of field testing etc.350 MM DIA Meter 90 90 90 90 90 90400 MM DIA Meter 102 102 102 102 102 102450 MM DIA Meter 114 114 114 114 114 114500 MM DIA Meter 120 120 120 120 120 120

185

Public Health Items

600 MM DIA Meter 150 150 150 150 150 150700 MM DIA Meter 174 174 174 174 174 174800 MM DIA Meter 198 198 198 198 198 198900 MM DIA Meter 222 222 222 222 222 2221000 MM DIA Meter 252 252 252 252 252 2521100 MM DIA Meter 282 282 282 282 282 2821200 MM DIA Meter 306 306 306 306 306 3061300 MM DIA Meter 370 370 370 370 370 3701400 MM DIA Meter 410 410 410 410 410 4101500 MM DIA Meter 440 440 440 440 440 4401600 MM DIA Meter 500 500 500 500 500 500

3CONVEYANCE OF PRE-STRESSED (NON-CYLINDER) CONCRETE PIPIES AND ACCESSORIES including loading at Factory, un-loading at site and stacking for the following sizes.

350 MM DIA PerKM/M 0.65 0.65 0.65 0.65 0.65 0.65400 MM DIA PerKM/M 0.65 0.65 0.65 0.65 0.65 0.65

450 MM DIA PerKM/M 0.73 0.73 0.73 0.73 0.73 0.73

500 MM DIA PerKM/M 0.85 0.85 0.85 0.85 0.85 0.85

600 MM DIA PerKM/M 1.02 1.02 1.02 1.02 1.02 1.02

700 MM DIA PerKM/M 1.70 1.70 1.70 1.70 1.70 1.70

800 MM DIA PerKM/M 1.70 1.70 1.70 1.70 1.70 1.70

900 MM DIA PerKM/M 1.70 1.70 1.70 1.70 1.70 1.70

1000 MM DIA PerKM/M 2.55 2.55 2.55 2.55 2.55 2.55

1100 MM DIA PerKM/M 2.55 2.55 2.55 2.55 2.55 2.55

1200 MM DIA PerKM/M 5.10 5.10 5.10 5.10 5.10 5.10

1300 MM DIA PerKM/M 5.20 5.20 5.20 5.20 5.20 5.20

Common SSR 2007-08

186

Public Health Items

1400 MM DIA PerKM/M 5.20 5.20 5.20 5.20 5.20 5.20

1500 MM DIA PerKM/M 5.20 5.20 5.20 5.20 5.20 5.20

1600 MM DIA PerKM/M 5.72 5.72 5.72 5.72 5.72 5.72

4Cost of Machine end pair (Socket+Spigot) for providing MS Specials on PSC Pipelines excluding Cost of MS Special including cost and conveyance to site etc., complete.350 MM DIA Per Pair 7000 7000 7000 7000 7000 7000400 MM DIA Per Pair 8000 8000 8000 8000 8000 8000450 MM DIA Per Pair 9000 9000 9000 9000 9000 9000500 MM DIA Per Pair 10000 10000 10000 10000 10000 10000600 MM DIA Per Pair 12000 12000 12000 12000 12000 12000700 MM DIA Per Pair 14000 14000 14000 14000 14000 14000800 MM DIA Per Pair 16000 16000 16000 16000 16000 16000900 MM DIA Per Pair 18000 18000 18000 18000 18000 180001000 MM DIA Per Pair 20000 20000 20000 20000 20000 200001100 MM DIA Per Pair 22000 22000 22000 22000 22000 220001200 MM DIA Per Pair 24000 24000 24000 24000 24000 240001300 MM DIA Per Pair 26000 26000 26000 26000 26000 260001400 MM DIA Per Pair 30800 30800 30800 30800 30800 308001500 MM DIA Per Pair 36000 36000 36000 36000 36000 360001600 MM DIA Per Pair 40000 40000 40000 40000 40000 40000

Note: a) The above rate of PSC pipes are based on the HT wire cost of Rs.40,500/-MT (Basic+CED+ST & freight). and cement price of Rs. 4140/- per MT (including all taxes and frieght)The rates may be revised depending upon the increase/decrease in the cost of HT wire and cement as per the following method. For every increase/decrease of Rs.1000/- in the cost of HT wire (landed price) or part there of proportionately, increase/decrease the cost of pipe by 2.7%. The cost of HT wire may be obtained from reputed firms like SAIL/TATA/ SS Ltd. etc., b) For every increase/decrease of Rs.100/- per MT in the cost of Cement, increase/decrease in the cost of pipe shall be 0.70%Note: The duties and taxes as applicable on the cost of pipe shall be added as per rules at the time of preparation of estimate.

12. S.S. RATES FOR PRE-STRESSED (CYLINDER) CONCRETE PIPES

Common SSR 2007-08

187

Public Health Items

Sl. No.

Description

Common SSR 2007-08

188

Public Health Items

1 2

1PRE-STRESSED (CYLINDER TYPE ) CONCRETE PIPES CONFORMING TO IS 784/2001 @ Ex-factory Cost of pipes, excluding transportation, laying, jointing, testing,Bends,Tees, Specials, taxes & duties Etc.

Size Unit Proposed Rates for 2007-08. 4

Kg/cm26

Kg/cm28

Kg/cm210

Kg/cm212

Kg/cm214

Kg/cm216

Kg/cm218

Kg/cm220

Kg/cm2400 MM DIA Meter 3150 3150 3150 3150 3160 3200 3240 3270 3300

450 MM DIA Meter 3420 3420 3420 3440 3470 3520 3570 3600 3640

500 MM DIA Meter 3760 3760 3770 3810 3850 3900 3950 4030 4080

600 MM DIA Meter 4460 4490 4540 4600 4670 4730 4820 4900 4960

700 MM DIA Meter 5150 5220 5300 5380 5470 5540 5640 5770 5865

800 MM DIA Meter 6050 6140 6250 6360 6470 6570 6700 6835 7000

900 MM DIA Meter 7170 7290 7430 7570 7710 7840 8020 8200 8370

1000 MM DIA Meter 8200 8360 8530 8700 8880 9030 9240 9500 9710

1100 MM DIA Meter 9420 9620 9830 10040 10260 10450 10700 10980 11550

1200 MM DIA Meter 10810 11050 11300 11560 11810 12040 12330 12800 13205

1300 MM DIA Meter 12170 12460 12760 13060 13370 13640 14330 14590 15060

1400 MM DIA Meter 13510 13850 14200 14560 14920 15610 16050 16380 17370

1500 MM DIA Meter 16175 16580 17000 17400 18000 18460 19155 20200 20695

1600 MM DIA Meter 17965 18410 18870 19730 20255 20780 22080 22655 23215

1700 MM DIA Meter 19075 19590 20135 21110 21695 22780 23765 24390 24970

1800 MM DIA Meter 20860 21400 22450 23110 23745 24930 25975 26710 27445

1900 MM DIA Meter 23715 24310 25435 26145 27350 28100 29245 30030 30785

2000 MM DIA Meter 24890 25950 26700 27470 28820 29630 30895 31790 32580

2Cost of laying jointing, testing to Hydrostatic field test pressure including cost of cost of site welding and

fixing of Polypropylene Diapher cloth, cost of transportation of water and emptying pipe line after completion of field testing etc.

400 MM DIA Meter 250 250 250 250 250 250 250 250 250

450 MM DIA Meter 290 290 290 290 290 290 290 290 290

500 MM DIA Meter 320 320 320 320 320 320 320 320 320

600 MM DIA Meter 380 380 380 380 380 380 380 380 380

Common SSR 2007-08

189

Public Health Items

700 MM DIA Meter 440 440 440 440 440 440 440 440 440

800 MM DIA Meter 500 500 500 500 500 500 500 500 500

900 MM DIA Meter 570 570 570 570 570 570 570 570 570

1000 MM DIA Meter 640 640 640 640 640 640 640 640 640

1100 MM DIA Meter 710 710 710 710 710 710 710 710 710

1200 MM DIA Meter 780 780 780 780 780 780 780 780 780

1300 MM DIA Meter 850 850 850 850 850 850 850 850 850

1400 MM DIA Meter 920 920 920 920 920 920 920 920 920

1500 MM DIA Meter 1010 1010 1010 1010 1010 1010 1010 1010 1010

1600 MM DIA Meter 1080 1080 1080 1080 1080 1080 1080 1080 1080

1700 MM DIA Meter 1250 1250 1250 1250 1250 1250 1250 1250 1250

1800 MM DIA Meter 1300 1300 1300 1300 1300 1300 1300 1300 1300

1900 MM DIA Meter 1410 1410 1410 1410 1410 1410 1410 1410 1410

2000 MM DIA Meter 1520 1520 1520 1520 1520 1520 1520 1520 1520

3CONVEYANCE OF PRE-STRESSED (CYLINDER TYPE) CONCRETE PIPIES AND ACCESSORIES including loading at Factory, un-loading at site and stacking for the following sizes.

400 MM DIA Per KM/M 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65

450 MM DIA Per KM/M 0.73 0.73 0.73 0.73 0.73 0.73 0.73 0.73 0.73

500 MM DIA Per KM/M 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85

600 MM DIA Per KM/M 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02700 MM DIA Per KM/M 1.70 1.70 1.70 1.70 1.70 1.70 1.70 1.70 1.70800 MM DIA Per KM/M 1.70 1.70 1.70 1.70 1.70 1.70 1.70 1.70 1.70900 MM DIA Per KM/M 1.70 1.70 1.70 1.70 1.70 1.70 1.70 1.70 1.70

1000 MM DIA Per KM/M 2.55 2.55 2.55 2.55 2.55 2.55 2.55 2.55 2.55

1100 MM DIA Per KM/M 2.55 2.55 2.55 2.55 2.55 2.55 2.55 2.55 2.55

1200 MM DIA Per KM/M 5.10 5.10 5.10 5.10 5.10 5.10 5.10 5.10 5.10

1300 MM DIA Per KM/M 5.10 5.10 5.10 5.10 5.10 5.10 5.10 5.10 5.10

1400 MM DIA Per KM/M 5.10 5.10 5.10 5.10 5.10 5.10 5.10 5.10 5.10

1500 MM DIA Per KM/M 5.10 5.10 5.10 5.10 5.10 5.10 5.10 5.10 5.10

1600 MM DIA Per KM/M 5.10 5.10 5.10 5.10 5.10 5.10 5.10 5.10 5.10

Common SSR 2007-08

190

Public Health Items

1700 MM DIA Per KM/M 6.20 6.20 6.20 6.20 6.20 6.20 6.20 6.20 6.20

1800 MM DIA Per KM/M 6.20 6.20 6.20 6.20 6.20 6.20 6.20 6.20 6.20

1900 MM DIA Per KM/M 6.20 6.20 6.20 6.20 6.20 6.20 6.20 6.20 6.20

2000 MM DIA Per KM/M 6.55 6.55 6.55 6.55 6.55 6.55 6.55 6.55 6.55

Note:The rates of PCCP pipes which were incorporatede in the SSR are based on the following raw materials cost.HT Wire: - Rs.40,500/- (including all taxes & freight)HR Coil (Hot Rolled): - Rs.35,000/- (including all taxes & freight)Cement Cost Rs. 4140/-.per MT (including all duties, taxes & frieght)The rates may be revised depending upon the increase/ decrease in the cost of raw materials (landed price) as per the following method. For every increase/decrease of Rs.1000/- in the cost fo raw materials or part there of proportionately.In respect of HT Wire - The increase/ decrease in cost of pipe is 2.70%In respect of HR Coil (Hot Rolled) - The increase/ decrease in cost of pipe is 2.24%For every increase/decrease of Rs.100/- per MT in the cost of Cement, increase/decrease in the cost of pipe shall be 0.70%The cost of plates/ wire rods may be obtained from reputed firm like SAIL./TATA /SSL Ltd.etc.The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.

Common SSR 2007-08

191

Public Health Items

13. S.S. RATES FOR BAR WRAPPED STEEL CYLINDRICAL (BWSC) PIPES

Sl.No.

Description

1 2

1BAR WRAPPED STEEL CYLINDRICAL (BWSC) PIPES CONFORMING TO IS 15155 - 2002, Ex-factory excluding transportation, taxes and duties etc., for Bar wrapped steel cylindrical pipes.

Size Unit Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs. 4 -12

Kg/cm214

Kg/cm216

Kg/cm218

Kg/cm220

Kg/cm222

Kg/cm224

Kg/cm226

Kg/cm228

Kg/cm230

Kg/cm2

250 MM DIA Meter 1,782 1,782 1,782 1,782 1,782 1,782 1,782 1,782 1,799 1,865 300 MM DIA Meter 2,008 2,008 2,008 2,008 2,008 2,008 2,056 2,134 2,172 2,250 350 MM DIA Meter 2,460 2,460 2,460 2,460 2,460 2,460 2,521 2,606 2,679 2,754 400 MM DIA Meter 2,709 2,709 2,709 2,709 2,709 2,833 2,943 3,054 3,165 3,547 450 MM DIA Meter 2,957 2,957 2,957 2,988 3,127 3,264 3,403 3,541 3,682 3,954 500 MM DIA Meter 3,298 3,298 3,333 3,488 3,659 3,833 4,020 4,171 4,492 4,662 600 MM DIA Meter 4,341 4,341 4,402 4,648 4,893 5,117 5,374 5,624 5,971 6,184 700 MM DIA Meter 4,917 5,035 5,365 5,695 6,026 6,356 6,796 7,086 7,433 7,810 800 MM DIA Meter 5,589 6,016 6,444 6,859 7,279 7,853 8,285 8,957 9,388 9,850 900 MM DIA Meter 6,927 7,196 7,733 8,256 8,780 9,349 10,180 10,812 11,377 12,005 1000 MM DIA Meter 7,813 8,474 9,125 9,760 10,397 11,375 12,184 13,334 13,959 14,797 1100 MM DIA Meter 11,250 11,450 11,550 12,650 13,890 14,840 16,060 17,260 18,430 19,840 1200 MM DIA Meter 12,430 12,790 13,230 14,570 15,980 17,400 18,580 19,520 21,760 23,750

2 Cost of laying jointing, testing to Hydrostatic field test pressure including cost of site welding and fixing of Polypropylene Diapher cloth, cost of transportation of water and emptying pipe line after completion of field testing.

250 MM DIA Meter 207.00 207.00 207.00 207.00 207.00 207.00 207.00 207.00 207.00 207.00 300 MM DIA Meter 241.50 241.50 241.50 241.50 241.50 241.50 241.50 241.50 241.50 241.50 350 MM DIA Meter 287.50 287.50 287.50 287.50 287.50 287.50 287.50 287.50 287.50 287.50 400 MM DIA Meter 322.00 322.00 322.00 322.00 322.00 322.00 322.00 322.00 322.00 322.00 450 MM DIA Meter 368.00 368.00 368.00 368.00 368.00 368.00 368.00 368.00 368.00 368.00 500 MM DIA Meter 402.50 402.50 402.50 402.50 402.50 402.50 402.50 402.50 402.50 402.50

Common SSR 2007-08

192

Public Health Items

600 MM DIA Meter 494.50 494.50 494.50 494.50 494.50 494.50 494.50 494.50 494.50 494.50 700 MM DIA Meter 575.00 575.00 575.00 575.00 575.00 575.00 575.00 575.00 575.00 575.00 800 MM DIA Meter 655.50 655.50 655.50 655.50 655.50 655.50 655.50 655.50 655.50 655.50 900 MM DIA Meter 770.50 770.50 770.50 770.50 770.50 770.50 770.50 770.50 770.50 770.50 1000 MM DIA Meter 851.00 851.00 851.00 851.00 851.00 851.00 851.00 851.00 851.00 851.00 1100 MM DIA Meter 1,000.00 1,000.00 1,010.00 1,010.00 1,030.00 1,030.00 1,050.00 1,050.00 1,100.00 1,000.00 1200 MM DIA Meter 1,120.00 1,120.00 1,160.00 1,160.00 1,180.00 1,180.00 1,220.00 1,220.00 1,220.00 1,300.00

3 Conveyance of Bar Wrapped steel Cylindrical (BWSC) pipes and accessories including loading at Factory, un-loading at site and stacking for the following sizes.

250 MM DIA Per KM/M 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 300 MM DIA Per KM/M 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 0.34 350 MM DIA Per KM/M 0.43 0.43 0.43 0.43 0.43 0.43 0.43 0.43 0.43 0.43 400 MM DIA Per KM/M 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.51 450 MM DIA Per KM/M 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 0.65 500 MM DIA Per KM/M 0.73 0.73 0.73 0.73 0.73 0.73 0.73 0.73 0.73 0.73 600 MM DIA Per KM/M 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 0.85 700 MM DIA Per KM/M 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 800 MM DIA Per KM/M 1.28 1.28 1.28 1.28 1.28 1.28 1.28 1.28 1.28 1.28 900 MM DIA Per KM/M 1.28 1.28 1.28 1.28 1.28 1.28 1.28 1.28 1.28 1.28 1000 MM DIA Per KM/M 1.70 1.70 1.70 1.70 1.70 1.70 1.70 1.70 1.70 1.70 1100 MM DIA Per KM/M 3.90 3.90 3.90 3.90 3.90 3.90 3.90 3.90 3.90 3.90 1200 MM DIA Per KM/M 5.20 5.20 5.20 5.20 5.20 5.20 5.20 5.20 5.20 5.20

Note:The above rates of BWSC pipes are based on the following raw materials' cost. HR Plates - Rs.35,000/- per MT (Basic+CED+ST & freight) Wire rods - Rs.30,000/- per MT (Basic+CED+ST & freight) Cement Cost Rs. 4140/-.per MT (including all duties, taxes & frieght) The rates may be revised depending upon the increase/ decrease in the cost of raw materials (landed price) as per the following method. For every increase/decrease of Rs.1000/- in the cost or part there of proportionately of HR Plate and wire rods In respect of HR plates - The increase/ decrease in cost of pipe is 3.74% In respect of Wire road - The increase/ decrease in cost of pipe is 1.70% For every increase/decrease of Rs.100/- per MT in the cost of Cement, increase/decrease in the cost of pipe shall be 0.26%

Common SSR 2007-08

193

Public Health Items

The cost of plates/ wire rods may be obtained from reputed firms like SAIL /TATA /SS Ltd. Etc;

Note:The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.

Common SSR 2007-08

194

14. S.S. RATES FOR GLASS FIBRE REINFORCED PLASTIC (GRP) PIPES

Sl.No.

Description

1 2

1

GLASSFIBRE REINFORCED PLASTIC (GRP) PIPES CONFORMING TO IS 12709 - 1994 Stiffness class 124 Kpa including transportation to any where in A.P. with jointing materials i.e., Reka couplings, Rubber Gaskets etc., for jointing pipes including cost of specials, loading, un-loading and stacking etc., complete but excluding Central Excise duty and to be added sale tax.

Size Unit S.S. Rates for 2007-08. Rs. 3 Bar 6 Bar 9 Bar 12 Bar 15 Bar

350 MM DIA Meter 2,251 2,282 2,353 2,418 2,530 400 MM DIA Meter 2,507 2,618 2,714 2,841 2,953 450 MM DIA Meter 2,941 3,054 3,221 3,380 3,572 500 MM DIA Meter 3,349 3,485 3,685 3,915 4,139 600 MM DIA Meter 4,257 4,433 4,703 5,182 5,423 700 MM DIA Meter 5,388 5,634 5,986 6,529 7,024 800 MM DIA Meter 6,595 6,907 7,457 8,112 8,759 900 MM DIA Meter 8,245 8,595 9,338 10,128 10,967 1000 MM DIA Meter 9,881 10,336 11,118 12,125 13,071

2Cost of laying jointing, testing to Hydrostatic field test pressure including cost of transportation of water and emptying pipe line after completion of field testing.

Size Unit S.S.Rates for 2007-08. Rs. 3 Bar 6 Bar 9 Bar 12 Bar 15 Bar

350 mm dia Meter 120 120 120 120 120 400 mm dia Meter 180 180 180 180 180 450 mm dia Meter 220 220 220 220 220 500 mm dia Meter 280 280 280 280 280 600 mm dia Meter 300 300 300 300 300 700 mm dia Meter 340 340 340 340 340 800 mm dia Meter 400 400 400 400 400 900 mm dia Meter 440 440 440 440 440 1000 mm dia Meter 510 510 510 510 510

Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.The methodology adopted for rates is as follows:Percentage of raw materials in the finished product of the pipe1) Hoop Glass Fibre Rovings H% (35%)2) Chop Glass C% (40%)3) Resin R% (25%)

The cost of variation in Raw materials are:1) Variation in cost of Hoop Glass :h%2) Variation in cost of Chop Glass :c%3) Variation in cost of Resin :r%The percentage of variation in cost of pipe allowed is (H x h + C x c + R x r)/100The above raw materials rates are obtained form the principal manufacturers.The rates of raw materials are:1) Hoop Glass Fibre Rovings - Rs.90/kg (Excluding CED&ST)2) Chop Glass - Rs.76/kg (Excluding CED&ST)3) Resin - Rs.78/kg (Excluding CED&ST)

15. S.S. RATES FOR H.D.P.E PIPES FOR THE YEAR 2007-08. (PE - 80 Grade)

195

Public Health Items

Sl.No Description

2.5 kg/

sqcm

4.0 kg/

sqcm

6.0 kg/

sqcm

8.0 kg/

sqcm

10.0 kg/

sqcm1 2 3 4

Manufacture, supply, & delivery of HDPE pipes conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete. ( Supply upto 90 mm dia in coil & above 90 mm dia stright length in 6 M.)

Rate per Meter OD 20 mm - - - - 13.84

OD 25 mm - - - - 18.79

OD 32 mm - - 22.47 25.75 30.68

OD 40 mm - 27.08 30.51 39.47 47.72

OD 50 mm - 38.67 49.01 61.25 73.95

OD 63 mm 34.00 52.95 73.66 93.56 112.56

OD 75 mm 54.00 72.38 104.59 132.36 158.94

OD 90 mm 71.27 104.72 148.58 189.37 227.26

OD 110 mm 100.95 156.62 222.82 283.23 336.83

OD 125 mm 126.61 200.97 285.25 364.30 436.72

OD 140 mm 165.47 248.83 357.32 455.53 547.76

OD 160 mm 214.03 326.02 466.08 593.75 713.97

OD 180 mm 266.12 410.97 586.73 752.68 902.18

OD 200 mm 326.87 502.79 726.84 927.75 1112.35

OD 225 mm 426.65 658.68 945.36 1207.97 1452.83

OD 250 mm 526.32 814.87 1163.93 1493.91 1793.15

OD 280 mm 661.39 1014.84 1458.92 1869.59 2246.71

OD 315 mm 830.29 1290.91 1849.85 2366.67 2842.37

Note: Excise duty, CST / VAT exra as applicable at the time of supply.The IPCL resin cost adopted for the above rates are For PE - 80 grade Rs.67,970/- per MT. (Excluding CED&ST)The variation in cost of HDPE pipes due to increase / decrease in raw material cost shall be allowed as per the following price variation formula.price variation formula as follows:P2 = P1 + (A2 - A1) /1000 x M x 0.9 (for increase in raw material cost)P2 = P1 - (A1 - A2) /1000 x M x 0.9 (for decrease in raw material cost) P2 = Revised pipe price in Rs. Per Meter P1 = Existing pipe price in Rs. Per Meter A2 = Revised price of raw material Rs. Per MTA1 = Existing price of raw material Rs. Per MTM = Weight of pipe in Kgs per Meter as per weight chart.

16. S.S. RATES FOR PVC PIPES

Sl. Description TEST PRESSURE

Common SSR 2007-08

196

Public Health Items

No.2.5

Kgs/cm24.0

Kgs/cm26

Kgs/cm210

Kgs/cm2

1 2 3 4 5 6

1

Manufacture, Supply and delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (third revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding Excise duty and Sales Tax etc.

DIA IN MM Rate/Metre Rs. Rs. Rs. Rs.

20 -- -- -- 7.05

25 -- -- -- 10.99

32 -- -- -- 17.56

40 -- -- 17.39 26.92

50 -- -- 25.63 41.80

63 -- 27.66 39.40 60.77

75 -- 39.55 54.93 86.78

90 36.42 55.70 78.70 122.98

110 54.79 80.52 114.18 184.67

125 70.55 105.01 143.94 241.67

140 86.46 130.84 187.06 297.52

160 115.00 172.76 243.14 392.76

180 144.28 220.34 314.51 503.70

200 184.83 268.05 380.97 610.91

225 238.52 352.11 508.57 809.81

250 287.58 384.07 628.67 988.96

280 370.49 537.71 792.48 1,253.25

315 466.15 682.54 994.27 1,580.15

Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.Note:The IPCL resin cost adopted for the above rates is Rs.45,810/- per MT (Basic rate, excluding CED)The veriation in cost of PVC pipes due to increase / decrease in raw material cost shall be allowed subject to the following price variation formula.The price variation formula to be adopted is as follows:P2 = P1 + (A2 - A1) /1000 x M x 0.95 (for increase in raw material cost)P2 = P1 - (A1 - A2) /1000 x M x 0.95 (for decrease in raw material cost)P2 = Revised pipe price in Rs. Per Meter P1 = Existing pipe price in Rs. Per Meter A2 = Revised price of raw material Rs. Per MTA1 = Existing price of raw material Rs. Per MTM = Weight of pipe in Kgs per Meter as per weight chart.

17. S.S. RATES FOR CENTRIFUGALLY CAST (SPUN) IRON PRESSURE PIPES

Common SSR 2007-08

197

Public Health Items

Sl. No.

Description Unit S.S. Rates for 2007-08.

1 2 3 4 5 6

SOCKET AND SPIGOT CENTRIFUGALLY CAST (SPUN) IRON PRESSURE PIPES FOR WATER, GAS AND SEWAGE CONFORMING TO SPECIFICATION NO: I..S 1536/1989 (THIRD REVISION) WITH Amdt. No: 1 & 2 IN STANDARD LENGTHS OF 3.66 M, 4 M, 4.5M, 5 M, 5.5 M & 6 M AND DETAILS GIVEN BELOW, SUITABLE EITHER FOR LEAD JOINTING OR RUBBER GASKET (PUSHON) JOINTING AT PURCHASERS OPTION AT EX-FACTORY EXCLUDING TRANSPORTATION, TAXES & DUTIES.

LA Class (Rs)

A Class (Rs)

B Class (Rs)

Nominal dia (in MM)

80 Rmt 444.56 482.91 517.91

100 Rmt 536.89 591.06 630.34

125 Rmt 669.62 730.82 787.35

150 Rmt 800.23 877.07 944.96

200 Rmt 1168.00 1267.21 1370.89

250 Rmt 1573.78 1713.67 1853.57

300 Rmt 2029.42 2218.67 2403.71

350 Rmt 2612.17 2833.38 3072.83

400 Rmt 3179.89 3474.94 3751.27

450 Rmt 3853.16 4232.96 4566.39

500 Rmt 4576.79 4985.65 5394.51

600 Rmt 6033.44 6586.42 7135.04

700 Rmt 8007.87 8748.83 9451.42

750 Rmt 8968.66 9805.33 10637.28

800 Rmt 10039.62 10938.34 11832.35

900 Rmt 12236.45 16058.48 14465.68

1000 Rmt 14700.11 16058.48 17355.03

Note:The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.

18. S.S. RATES FOR DUCTILE IRON PRESSURE PIPES

Sl. No. Description Unit

S.S.Rates for 2007-08

1 2 3 4 5

Common SSR 2007-08

198

Public Health Items



1

CENTRIFUGALLY CAST (SPUN) DUCTILE IRON PRESSURE PIPES FOR WATER, GAS AND SEWAGE WITH SOCKET SPIGOT ENDS CONFORMING TO I.S.: 8329/2000 IN STANDARD WORKING LENGTHS OF 4, 5 5.5 & 6 METER FOR CLASSIFICATION K9 & K7 SUITABLE FOR PUSH-ON-JOINT (RUBBER GASKET D JOINTING) WITH CEMENT MORTAR LINING INSIDE THE PIPES WITH OUTSIDE ZINC COATING. RATES ARE EX-FACTORY, EXCLUDING TRANSPORTATION, TAXES & DUTIES.

Nominal Dia in mm Rmt K9 K7

100 Rmt 656.84 591.58

150 Rmt 964.79 780.87

200 Rmt 1284.16 1138.66

250 Rmt 1683.38 1534.24

300 Rmt 2131.84 1978.43

350 Rmt 2658.81 2494.19

400 Rmt 3211.06 3036.87

450 Rmt 3845.83 3668.22

500 Rmt 4473.94 4382.41

600 Rmt 5897.82 5840.27

700 Rmt 7657.06 7580.48

750 Rmt 8589.91 8504.00

800 Rmt 9472.19 9377.46

900 Rmt 11566.77 11451.11

1000 Rmt 13687.96 13551.07

2

CENTRIFUGALLY CAST (SPUN) DUCTILE IRON PRESSURE PIPES FOR WATER, GAS AND SEWAGE WITH PLAIN ENDS CONFORMING TO I.S.: 8329/2000 IN STANDARD WORKING LENGTHS OF 4, 5, 5.5 & 6 METER FOR CLASSIFICATION K9 & K7 WITH CEMENT MORTAR LINING INSIDE THE PIPES WITH OUTSIDE ZINC COATING. RATES ARE EX-FACTORY, EXCLUDING TRANSPORTATION, TAXES & DUTIES.

Nominal Dia in mm K9 K7

100 Rmt 598.29 493.20

150 Rmt 871.62 707.47

200 Rmt 1189.52 1024.72

250 Rmt 1582.15 1375.66

300 Rmt 2002.52 1768.59

350 Rmt 2487.66 2225.24

400 Rmt 3004.65 2701.51

450 Rmt 3544.02 3250.80

500 Rmt 4262.40 3879.44

600 Rmt 5472.23 5146.00

Common SSR 2007-08

199

Public Health Items



700 Rmt 6945.05 6875.60

750 Rmt 7781.13 7703.32

800 Rmt 8590.42 8504.52

900 Rmt 10388.81 10284.92

1000 Rmt 12349.77 12226.27

3

CENTRIFUGALLY CAST (SPUN) DUCTILE IRON PRESSURE PIES WITH FLANGED (WELDED) ENDS FOR WATER, GAS, SEWAGE CONFORMING TO I.S.: 8329/2000 IN STANDARD WORKING LENGTHS OF 4, 5 Mts FOR CLASSIFICATION K9 WITH CEMENT MORTAR LINING INSIDE THE PIPES WITH OUTSIDE ZINC COATING. RATES ARE EX-FACTORY, EXCLUDING TRANSPORTATION, TAXES & DUTIES.

Nominal Dia in mm 4.0

Mt.Length

5.0 Mt.Lengt

h 100 Rmt 4405.00 5107.00

150 Rmt 6322.00 7345.00

200 Rmt 8496.00 9892.00

250 Rmt 11209.00 13069.00

300 Rmt 14087.00 16437.00

350 Rmt 19772.00 22691.00

400 Rmt 24204.00 27730.00

450 Rmt 28933.00 33092.00

500 Rmt 34588.00 39473.00

600 Rmt 47485.00 53907.00

700 Rmt 58098.00 66249.00

800 Rmt 71726.00 81807.00

900 Rmt 86016.00 98207.00

1000 Rmt 106925.00 121417.00


Common SSR 2007-08

200

Public Health Items

19. S.S. RATES FOR DUCTILE IRON FITTINGS

Sl. No.

Description UnitS.S Rates

for 2007-08

1 2 3 4CENTRIFUGALLY CAST (SPUN) DUCTILE IRON FITTINGS CONFORMING TO IS:9523/2000 HAVING DIMENTIONS AS PER TABLE. THE RATES MENTIONED HERE UNDER ARE FOR FITTINGS, ZINC COATED EXTERNALLY WITH INSIDE MORTAR LINING (WITH FINISHING AS PER CLASS 13/IS 9523/2000) ( Ex-works) Excluding transportation, taxes and duties etc.

I DI double socket branch flange Tee

Nominal dia in mm

80 x 80 Each 731.25

100 x 80 Each 843.75

100 x 100 Each 956.25

150 x 80 Each 1,181.25

150 x 100 Each 1,293.75

150 x 150 Each 1,575.00

200 x 80 Each 1,631.25

200 x 100 Each 1,743.75

200 x 150 Each 2,081.25

200 x 200 Each 2,475.00

250 x 80 Each 2,025.00

250 x 100 Each 2,193.75

250 x 150 Each 2,531.25

250 x 200 Each 2,981.25

250 x 250 Each 3,543.75

300 x 100 Each 2,868.75

300x 200 Each 3712.50

300 x 300 Each 4950.00

350 x 100 Each 3,750.00

350 x 200 Each 4,875.00

350 x 350 Each 7,312.50400 x 80 Each 4,250.00400 x 100 Each 4,500.00400 x 150 Each 5,062.50400 x 200 Each 5,687.50400 x 300 Each 7,250.00400 x 400 Each 9,375.00450 x 100 Each 5,500.00450 x 250 Each 7,500.00500 x 100 Each 7,081.25500 x 200 Each 8,593.75500 x 400 Each 12,581.25500 x 500 Each 15,400.00600 x 200 Each 11,756.25

Common SSR 2007-08

201

Public Health Items

IIDI All socket Tees

Nominal dia in mm

80 x 80 Each 675.00

100 x 80 Each 787.50

100 x 100 Each 843.75

150 x 80 Each 1,125.00

150 x 100 Each 1,181.25

150 x 150 Each 1,406.25

200 x 80 Each 1,575.00

200 x 100 Each 1,687.50

200 x 150 Each 1,912.50

200 x 200 Each 2,250.00

250 x 80 Each 1,968.75

250 x 100 Each 2,081.25

250 x 150 Each 2,362.50

250 x 200 Each 2,700.00

250 x 250 Each 3,093.75

300 x 100 Each 2,812.50

300x 200 Each 3,487.50

300 x 300 Each 4,331.25

III DI double socket concerntric TAPERS

Nominal dia in mm

100 x 80 Unit 450.00

150 x 80 Unit 731.25

150 x 100 Unit 731.25

200 x 100 Unit 1,125.00

200 x 150 Unit 1,125.00

250 x 150 Unit 1,575.00

250 x 200 Unit 1,518.75

300 x 150 Unit 2,137.50

300x 200 Unit 2,137.50

300 x 250 Unit 1,968.75

350 x 200 Unit 3,125.00

350 x 250 Unit 3,000.00

350 x 300 Unit 2,812.50

400 x 250 Unit 3,875.00

400 x 300 Unit 3,750.00

400 x 350 Unit 3,437.50

450 x 350 Unit 4,625.00

450 x 400 Unit 4,312.50

500 x 350 Unit 6,393.75

500 x 400 Unit 5,981.25

600 x 500 Unit 8,387.50

IV DI Flanged socket PN-10 PN-16

Nominal dia in mm Rate/Unit

Common SSR 2007-08

202

Public Health Items

80 500.00 500.00

100 562.50 562.50

150 875.00 875.00

200 1,250.00 1,250.00

250 1,625.00 1,625.00

300 2,062.50 2,187.50

350 2,887.50 3,093.75

400 3,437.50 3,781.25

450 3,987.50 4,675.00

500 5,175.00 6,300.00

600 - 10,200.00

V DI Flanged Spigot PN-10 PN-16Nominal dia in mm Rate/Unit

80 500.00 500.00

100 625.00 625.00

150 800.00 800.00

200 1,000.00 1,000.00

250 1,437.50 1,437.50

300 2,000.00 2,000.00

350 2,625.00 2,687.50

400 3,643.75 3,850.00

450 4,468.75 4,881.25

500 5,362.50 -

600 7,125.00 11,925.00


Common SSR 2007-08

203

Public Health Items

20 S.S. RATES FOR D.I. DOUBLE SOCKET BENDS

Sl.No.

Description

1 2 3 4 5 6

1

CENTRIFUGALLY CAST (SPUN) DUCTILE IRON FITTINGS CONFORMING TO IS:9523/2000 HAVING DIMENTIONS AS PER TABLE. THE RATES MENTIONED HERE UNDER ARE FOR FITTINGS, ZINC COATED EXTERNALLY WITH INSIDE MOTOR LINING (WITH FINISHING AS PER CLASS 13/IS 9523/2000)Ex - works excluding transportation, taxes and duties etc.

DI double socket Bends

Nominal dia in mm Rate/Each

90o 45o 22½ o 11¼o

80 508.30 451.80 393.75 393.75

100 618.75 564.70 506.25 508.30

150 1129.50 900.00 843.75 787.50

200 1800.00 1,462.50 1293.75 1181.25

250 2531.25 1,968.75 1687.50 1575.00

300 3656.25 2,756.25 2362.50 2137.50

350 5902.90 4,000.00 3312.50 2937.50

400 7618.90 5,000.00 4125.00 3625.00

450 10021.20 6,625.00 5312.50 4625.00

500 13272.00 8,800.00 7081.25 6050.00

600 20604.60 13,612.50 10862.50 9212.50


Common SSR 2007-08

204

Public Health Items

21 S.S. RATES FOR RUBBER GASKETS SUITABLE FOR C.I/ D.I. S/S PIPES


S.S Rates For

2007-08

1 2 3 4

1

MANUFACTURE AS PER BIS 12820/89 WITH S.B.R. QUALITY RUBBER CONFIRMING TO BIS: 5382/85, SUPPLY AND DELIVERY OF RUBBER GASKETS SUITABLE FOR C.I/ D.I. S/S PIPES ANYWHERE IN A.P. F.O.R. DESTINATION DEPARTMENTAL STORES INCLUDING COST OF MATERIAL, LOADING, INCIDENTAL HANDLING WITH COMPANYS STANDARD PACKING, TRANSPORTATION, UNLOADING & STACKING BUT EXCLUDING CENTRAL EXCISE DUTY, SALES TAX, OCTROI AND OTHER GOVT. LEVIES ETC., COMPLETE.

80mm dia Each 27.77

100mm dia Each 39.96
















Common SSR 2007-08

205

Public Health Items

22. RATES FOR CI PIPES AND SPECIALS

Sl. No.

Description Quality or sort

Rate/ Kg including packing,

forwarding, transitrisk and delivery any where in A.P. for the year

2007-08.Rs.

1 2 3 4

MANUFACTURE, SUPPLY AND DELIVERY OF CAST IRON PIPES AND FITTINGS (Spls.) CONFIRMING TO I.S. No. 7181/1986, 5531/1988, 3950/1979 AND C.I.D. JOINTS CONFIRMING TO IS No.8794/1988 AT SITE OF WORK ANYWHERE IN A.P. INCLUDING, LOADING, UNLOADING, TRANSPORTATION TO SITE OF WORK STACKING AT SITE TRANSIT RISK AND PACKAGE, EXCLUDING TAXES AND DUTIES.

I.S. No. 7181/1986 5531/1988 3950/1979

&8794/1988 33.25

Foot Note: The rate of CI pipes, CI Specials and CID Joints etc., which are to be incorporated in the SSR are based on the following raw materials cost.Pig Iron: Rs.20,000/- per M.T.Coke : Rs.20,000/- per M.T. The rates may be revised depending upon the increase/decrease in the cost of raw materials as per the following method. For every increase/decrease of Rs.1000/- in the cost of raw materials or part there of proportionately. Inrespect of Pig Iron: The increase/decrease in cost of CI Specials per Kg is 3.43%.Inrespect of coke: The increase/decrease in cost of CI Specials per Kg is 0.67%.The above price is at site of work , Exicise duty, CST/VAT extra as applicable at the time of supply.Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.

Common SSR 2007-08

206

Public Health Items

23. RATES FOR C.I. D/F VALVES

Sl.No.

Description Rs. Rs. Rs.

1 2 3 4 5

1

Manufacture, Supply and delivery of CI D/F Sluice valves conforming to IS 14846/2000 with amendments No. 1&2 heavy duty with CI grade FG 260 as per IS: 210. Two coats of primer suitable for EPOXY PAINTS finish shall be applied to all metal suface and finally two coats of Epoxy Paint. The Valves shall be tested for (closed end Test) against Hydrostaic test requirement.The rates are excluding transportation, Central Excise duty and sale tax etc., The operation can be done with handwheel/cap. ISI Marked.

DIA IN MM Rate/Each PN-1.0 PN-1.6 50 2800 3360

65 3094 3713

80 3273 3927

100 4364 5236

125 5454 6545

150 6545 7854

200 11472 13532

250 16226 19496

300 22274 25721

2

Manufacture, Supply and delivery of CI D/F Sluice valves Non-rising stem conforming to IS 14846/2000 with amendments No. 1&2 heavy duty with CI grade FG 260 as per IS: 210 . Two coats of primer suitable for EPOXY PAINTS finish shall be applied to all metal suface and finally two coats of Epoxy Paint. The Valves shall be tested for (closed end Test) against Hydrostaic test requirement. The rates are excluding transportation, Central Excise duty and sale tax etc., including the cost for enclosed Spur Gear Arrangement with thrust bearing for easy operation. ISI Marked.

DIA IN MM Rate/Each Rs. Rs. 350 50087 55099

400 59372 68883

450 74549 86470

500 85525 99360

600 125270 147322

700 207460 -

750 291499 -

800 339900 -

Common SSR 2007-08

207

Public Health Items

900 403852 -

1000 624000 -

1100 705000 -

1200 840000 -

Note: By Pass arrangement exta @ 7.5% for above 500mm dia. Valves.

3

Manufacture, Supply and delivery of CI D/F Non Return Valve Heavy Duty Round Body conforming to IS 5312/Part1/1984. excluding transportation, Central Excise duty and sale tax etc., complete.

DIA IN MM Rate/Each P.N 0.6 PN-1.0 PN-1.6

50 - - 172065 - - 215080 - - 2581100 - - 3440125 - - 4300150 - 5,160 6449200 - 10,292 12865250 - 14,927 18660300 - 22,458 28071350 30,897 - 37928400 39,480 - 49345450 66,499 - 83129500 80,214 - 100273600 128,153 - 160196

4

Manufacture, Supply and delivery of CI D/F Kinetic Double Air Valve Heavy Duty suitable for workking pressure upto 16kg/Cm2 without isolating valve, conforming to IS 14845 excluding transportation, Central Excise duty and sale tax etc., complete.

DIA IN MM Rate/Each PN-1.0

40 2,029

50 2,452

80 3,280

100 4,395

150 9,902

200 16,398

5

Manufacture, Supply and delivery of CI D/F Double Air Valve suitable for workking pressure upto 10kg/Cm2 conforming to G & K Fig.H7 excluding transportation, Central Excise duty and sale tax etc., complete.

DIA IN MM Rate/Each PN-1.0

40 1,259

50 1,739

80 2,409

Common SSR 2007-08

208

Public Health Items

100 2,989

150 7,789

200 13,585

6

Manufacture, Supply and delivery of CI D/F Kinetic Air Valve as per IS:14845 Heavy Duty with isolating valve bevel gear operated as per IS 14846 excluding transportation, Central Excise duty and sales tax etc., complete.

DIA IN MM Rate/Each PIN 1.0 PIN 1.6

40 5,774 6,64150 6,738 7,74980 8,876 10,204100 12,226 14,068150 24,090 27,713200 35,924 41,315

7

Conveyance of valves and accessories including loading at factory and unloading, stacking at site of work.

10% on basic cost of valves

Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.For FG 260, Grade of CI shall be certfied by reputed 3rd Party Quality Control Agency (as approved by indenting authority) at the cost of the supplier.

Common SSR 2007-08

209

Public Health Items

24. S.S RATES FOR C.I. D/F SOFT SEATED GATE / SLUICE VALVES

Sl. No.

Description PN-1.0 PN-1.6

1 2 3 4

1

Manufacture, supply and delivery of CI D/F Gate (Sluice) Valve (Soft Seated) as per IS: 11335/1995 with body bonnet of Cast Iron of grade FG 260 as per IS 210-1978 wedge fully rubber lined with EPDM and sealsof NBR and the valves should be of vaccum tight and 100% Leak proof with face to face dimensions as per IS : 14846-2000. All the valves should be with Electrostatic powder coating both inside and outside with pocket less body passage, excluding transportation, Central Excise duty and sale tax etc., complete.

DIA IN MM Rate/Each Rs. Rs.

50 3446.00 3790.00

80 4413.00 4854.00

100 5830.00 6413.00

150 9535.00 10488.00

200 15366.00 16,902.00

250 21100.00 23,210.00

300 35692.00 39,261.00

350 109000.00 118,000.00

400 118000.00 127,000.00

2



Note: The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate. For FG 260, Grade of CI shall be certfied by reputed 3rd Party Quality Control Agency (as approved by indenting authority) at the cost of the supplier

Common SSR 2007-08

210

Public Health Items

25. S.S.RATES FOR C.I. BUTTERFLY VALVES

Sl. No.

Description TEST PRESSURES

1 2 3 4 5

1

Manufacture, Supply and delivery of CI Wafer Lug type Butterfly Valves conforming to IS 13095/1991 (Reaffirmed 1998) excluding transportation,CED and taxes etc., complete. Operation done with worm actuator ISI marked Rate at Ex-Factory.

PN-0.6 PN-1.0PN-1.6 (New Item)

DIA IN MM Rate / Each Rs. Rs. Rs.40 1558 1634 197250 1686 1777 214365 1995 2090 256580 2461 2598 3135100 3297 3468 4389125 4123 4337 5472150 4940 5201 6612200 7695 8075 11400250 11020 11590 18050300 15200 17860 23750350 22990 23940 32728400 27740 29165 39891450 35625 37525 51253500 48070 50540 69037600 70015 73625 85557700 104215 107350 128552800 143925 147393 161500900 178600 182970 2014001000 218500 223630 2603001100 258400 264290 3420001200 292600 305900 402800

(New Item)

2

Manufacture, Supply and delivery of CI Wafer type Butterfly Valves conforming to IS 13095/1991 excluding transportation,CED and taxes etc., complete. Operation without worm actuator.( ISI marked) Rate at Ex-Factory.

PN-1.0 PN-1.6

DIA IN MM Rate / Each

80 1742 1991100 2375 2715125 3265 3732150 3663 4186200 10095 11537250 16027 18316300 21114 24130

(New Item)

3

Manufacture, Supply and delivery of CI D/F Butterfly Valves manually gear operated conforming to IS 13095/1991 excluding transportation,CED and taxes etc., complete. ISI marked Rate at Ex-Factory.

PN-1.0 PN-1.6

DIA IN MM Rate / Each Common SSR 2007-08

211

Public Health Items

300 25025 28601350 38723 44255400 46364 52987450 54171 61910500 63880 73006600 75198 85941700 112864 128987800 133027 152030900 141685 1619261000 177023 2023121100 228002 2605741200 300939 3439301300 353182 4036361400 498750 5700001500 565583 6463801600 645316 7375041800 838432 9582082000 952945 1089080

1283716 1467104

NOTE All the prices are ex-factory. Excise duty and CST / Local Tax extra as applicable at the time of supply. Packing and transportation extra at 10% on basic cost.

The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.

Common SSR 2007-08

212

Public Health Items

26. S.S RATES FOR WATER HAMMER CONTROL DEVICES

Sl. No. Description

TEST PRESSURE

10 Kgs/cm2

15 Kgs/cm2

20 Kgs/cm2

25 Kgs/cm2

Additional charges for Flanged ended valves

1 2 3 4 5 6 7

1

Manufacture, Supply and delivery of zero volocity valve/ PSLV with CI body with flanged ends as per AWWA, Ex-factory excluding transportation, Central Excise duty and sale tax etc., complete.

DIA IN MM Rate/Each Rs. Rs. Rs. Rs.

100

125

150 41831 48828 51713 56885

200 43700 50255 54025 59426

250 49306 56702 60955 67050

300 55488 63811 68598 75457

2

Manufacture, Supply and delivery of zero volocity valve/ PSLV with MS Fabricated Body with Plain ends. as per AWWA, Ex-factory excluding trans-portation, Central Excise duty and sale tax etc., complete.

DIA IN MM Rate/ Each Rs. Rs. Rs. Rs. Rs.

350 56413 64875 69741 76715 4888

400 62356 71709 77088 84799 5894

450 72526 83405 89660 98627 7044

500 83821 96393 103624 113987 7619

525/550 90034 102350 112726 123999 9847

600 100808 115929 124624 137086 14047

650 112844 124129 141091 152304 15885

700 131531 144756 164450 177604 18975

750 145691 160281 182131 196722 21304

800 177477 204100 219406 241345 24006

900 210943 242584 255875 286856 29038

1000 255875 255875 255875 355566 36872

1050 258434 258434 258434 374383 38347

1100 325996 369654 403022 443325 42694

1200 392366 431610 491697 529719 48300

1400 588549 647415 737546 794578 72450

1500 685760 754329 857181 925679 67922

1600 699475 769415 874325 944192 692813 Manufacture, Supply and

Common SSR 2007-08

213

Public Health Items

delivery of Air Cushan valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory excluding transportation, Central Excise duty and sale tax etc., complete.

DIA IN MM Rate/Each Rs. Rs. Rs. Rs.

100 36513 41990 46189 50807

150 55488 63811 70191 77211

200 59225 68109 74920 82412

4




Common SSR 2007-08

214

Public Health Items

27. S.S RATES FOR DI D/F VALVES

Sl. No. Description

TEST PRESSURE

PN 10 PN 16 PN 25

PN 40 Max. ^ P 32

bar

1 2 3 4 5 6

1

Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade GGG40/SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of austenitic alloy steel, Dn50 Float and Gaskets and seals of EPDM. Epoxy powder coating (EP-P) inside and outside colour blue .Drilled as per IS:1538.

DIA IN MM Rate/Each in Rs. 50 22150 22150 28500

80 29550 29550 29550

100 34500 34500 39675

150 42000 42000 48000

200 46000 46000 53500

2

Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage.Drilled as per IS:1538.

DIA IN MM Rate/Each in Rs. PN 10 PN 16

50 5303 5303

80 6790 6790

100 8970 8970

150 14670 14670

200 23640 23640

250 32462 32462

300 54912 54912

350 160227 160227

400 177078 177078

Common SSR 2007-08

215

Public Health Items

3

Manufacture, Supply and delivery of DI D/F Butterfly Valves with GGG40/SG 400/12 or Equivalent grade as per I.S.3896-part 2-1985 and subsequent revisions, Double eccentrically Disc., with renewable soft seal on the disc and Body seat face of nickel weld overlay micro finished, with powder or liquid Expoxy coating with minimum thickness of 250 microns applied on both body and disc inside and outside. Face to face dimensions as per AWWA C 504:80 or BS 5155 or IS:13095. Drilled as per IS:1538.

DIA IN MM Rate/Each in Rs. PN 10 PN 16 PN 25 PN 40

400 123348 139748 162707 230632

450 135414 150291 191407

500 136702 161360 256595 285000

600 179166 252964 297828 312284

700 353704 425628 560925 -

800 383458 528301 818691 -

900 603681 707408 -

1000 704070 879897 1187155 -

1100 812190 -

1200 975249 1209295 1326201 -

4

Manufacture, Supply and delivery of DI D/F Swing Check Valves Slanted/Straight seated with metallic, corrosion proof and wear resistant seat faces, Body and Disc of ductile cast iron GGG 40/SG Iron 420/12 or equivalent grade as per IS 3896(part2)-1985 and subsequent revisions . Shafts of stainless steel, shaft baring of zincfree bronze and sead faces with nickel weld over lay, micro finished. All the inside and outside of the body is to be coated with double coating of epoxy liquid. Drilled as per IS:1538. Dimensions as per I.S 5312 or equivalent codes.

DIA IN MM Rate/Each in Rs. PN 10 PN 16 PN 25 PN 40

200 57038 60431 88628 116006

250 62771 66573 107640 136013

300 78683 83363 131040 166023

350 92606 98163 149058 181233

400 112496 119223 150930 196268

500 143033 151691 191295 251726

600 214600 227500 282000 364500

700 309750 337800 412900 523600

800 387300 422100 520650 659600

Note: All the prices are ex-godown /ex-factory. Excise Duty and CST/Local Tax Extra as applicable at the time of supply. Packing and transportation extra at 5% on basic cost.The duties and taxes as applicable may be added as per rules at the time of preparation of estimate. The grade of DI& conforming to specifications shall be certified by a third party Quality control agency approved by indenting authority at the cost of supplier.

28. RATES FOR CAST STEEL VALVES

Common SSR 2007-08

216

Public Health Items

Sl.No.

Description TEST PRESSURES

Common SSR 2007-08

217

Public Health Items

1 2 3 4 5 6

1

Manufacture, Supply and delivery of Cast Carbon Steel Non rising spindle sluice valve desing standard as per IS:14846/2000 for Water Supply Shceme with SS Spindle & SS Working parts the grade of Cast Steel for body Bonnet, Dome, Stool Cover, Wedge, Stuffing Box, Gland Thrust Plate, shall be as per IS : 1030 / 1989. (The valve shall be used for High pressure schemes & pumping stations) excluding transporatation, Central Excise duty and sale tax etc., complete. ISI Marked

Class-150 Body

425PSI Seat 300

PSI PN-20

Class-300 Body 1100 PSI Seat 750 PSI PN-30

FOR Enclosed Spur Gear Arrangement.

Rate/EachClass 150

Class 300

DIA IN MM Rs. Rs.

40 3380 6760 - -

50 5570 10140 - -

65 6970 12675 - -

80 8360 15210 - -

100 11150 20280 - -

125 14300 26000 - -

150 16730 30420 - -

200 27020 54925 33070 60425

250 38030 86450 44080 91950

300 48040 109200 54090 114700

350 64060 145600 72310 153100

400 130130 295750 138380 303250

450 145860 325000 154110 332500

500 171600 390000 179850 397500

600 195910 444600 204160 452100

700 378950 - 387200 -

750 407550 - 419100 -

800 471900 - 483450 -

900 557700 - 569250 -

1000 715000 - 726550 -

1100 772200 - 783750 -

1200 872300 - 883850 -

2

Manufacture, Supply and delivery of Cast Carbon Steel Bolted Cover Non Return Valve as per IS : 5312 / Part1 / 1984. Round body heavy duty material spec. As per IS:1030/1989 with SS Hinge & Seat Rings. excluding transportation, Central Excise duty and sale tax etc., complete ISI Marked

Rate/Each PN-20 PN-30

DIA IN MM Rs.

40 3360 6110

Common SSR 2007-08

218

Public Health Items

50 5000 9100

65 6250 11375

80 7500 13650

100 10290 18200

125 12870 23400

150 14150 25740

200 21450 46800

250 30030 78000

300 42900 97500

350 57200 130000

400 117260 266500

450 131560 299000

500 154440 351000

600 178750 406250

3

Manufacture, Supply and delivery of Cast Steel Multi Door Type Non return Valve as per IS; 5312/ Part II / 1984 Heavy duty material spec. as per 1030/1989 with SS hinges & Seat Rings excluding transportation, Central Excise duty and sale tax etc., complete ISI Marked

Rate/EachDIA IN MM Rs.

500 260000

600 325000

700 390000

750 481000

800 715000

900 858000

1000 936000

1100 1105000

1200 1118000

4Conveyance of valves and accessories including loading at factory and unloading, stacking at site of work.


Note : The duties and taxes as applicable shall be added as per rules at the time of preparation of estimate.

29. S.S RATES FOR SFRC MAN-HOLE FRAME WITH COVERS

Sl.No. Description Unit

S.S. Rates for

2007-08.

1 2 3 4

Common SSR 2007-08

219

Public Health Items

I

Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding central exise duty, sales tax, octroi and other Govt levies etc., as applicable.

Rs.

a) M.D. -10 with 500mm dia clear opening Each 855

b) H.D.-20 with 500mm dia clear opening Each 1102

H.D.-20 with 560mm dia clear opening Each 1182

H.D.-35 with 560mm dia clear opening. Each 1267

II

Manufacture as per companys standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in A.P. including cost of materials packing as per companys standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding taxes such as sales tax,C.E.D and others etc., as applicable.

Each 90


Common SSR 2007-08

220

Public Health Items

30. S.S RATES FOR FUSION BONDED EPOXY COATING

Sl. No.

Description Unit Rate(Rs.)

1 2 3 4

Providing fusion bonded epoxy coating not less than 175 microns thickness and upto 300 microns to reinforcement of all diameters as per IS 13620-1993 including testing of coating at plant. The rate is inclusive of cost on account of careful handling, PVC coated binding wire instead of GI binding wire, touch up material supplied by coating agency, repair work, transportation from the source of supply of steel to the plant and transportation of coated steel from the plant to site of work, loading, unloading and staightening of bent rods etc., complete as per specification and as directed by the Engineer-in-charge.

per MT 8,964.00


Common SSR 2007-08

221

Public Health Items

31. OTHER ITEMS

Sl. No.

Description UnitS.S.Rates

for 2007-08.

1 2 3 4

1SUPPLY AND DELIVERY OF PIG LEAD 99.99 % PURE INCLUDING TAXES AND CONVEYANCE ETC., COMPLETE.

Per Kg 84.38

2SUPPLY AND DELIVERY OF SPUN YARN OF BEST QUALITY INCLUDING TAXES AND CONVEYANCE ETC., COMPLETE.

Per Kg 50.63

3SUPPLY AND DELIVERY OF RUBBER PACKING INCLUDING TAXES AND CONVEYANCE ETC., COMPLETE.

a) 3 mm thick Per Kg 33.75

b) 6 mm thick Per Kg 33.75

4

SUPPLY AND DELIVERY OF BOLTS AND NUTS WITH DOUBLE WASHERS INCLUDING TAXES AND CONVEYANCE ETC., COMPLETE. (1/2" TO 1")

Per Kg 46.80

Common SSR 2007-08

222

S.S RATES FOR CONVEYANCE OF CI PIPES, SPECIALS & VALVES PER METRIC TONNEEXCLUDING LOADING UNLOADING & STACKING

Diameter in MM 80 100 125 150 200 250 300 350 400 450 500 600 700 750 Remarks

For every KM lead or part there of (Rs.)

3.12 3.23 3.35 3.35 3.58 3.70 3.81 3.93 4.04 4.27 4.50 4.50 5.43 7.39

Note :The above rates will be applicable for convenance from Railway Station to stores or from stores to work site. In respect of DI pipes proportionate rates based on Weight may be worked out Adopted relevant loading, unloading and stacking as per item 4 to 7 of the P.H.S.S.R. item

223

Conveyance Rates of

Materials

224

Conveyance Rates

RATES FOR CONVEYANCE OF EARTH,SAND&GRAVEL INCLUDINGLOADING, UNLOADING &STACKING ON METALLED ROAD

S. No.

LEAD PERSS rate

for 2007-08

1 2 3 41 UP TO 250 METRES cum 44.80

2 250 To 500 METRES cum 66.10

3 1 Km. cum 86.704 2 Km. cum 90.805 3 Km. cum 96.006 4 Km. cum 100.307 5 Km. cum 104.508 6 Km. cum 113.509 7 Km. cum 119.1010 8 Km. cum 123.6011 9 Km. cum 129.1012 10 Km. cum 133.8013 11 Km. cum 140.5014 12 Km. cum 143.60

15 13 Km. cum 148.10

16 14 Km. cum 153.3017 15 Km. cum 158.0018 16 Km. cum 161.00

19 17 Km. cum 167.90

20 18 Km. cum 172.60

21 19 Km. cum 176.8022 20 Km. cum 182.30

23 Beyond 20 and up to 30 Km (Rate/Km) cum 4.10




27 Beyond 100 Km (Rate / Km) cum 3.40

28 L O A D I N G cum 8.70

29 U N L O A D I N G cum 7.20

30 S T A C K I N G cum 4.60

Common SSR 2007-08

225

Conveyance Rates

RATES FOR CONVEYANCE OF METAL, STONE, RUBBLE INCLUDING CUDDAPAH SLABS INCLUDING LOADING, UNLOADING &STACKING ON

METALLED ROAD

S. No. LEAD UNIT

SS Rate for

2007-08

1 2 3 4

1 UP TO 500 mts. cum 100.80

2 1 Km. cum 104.90

3 2 Km. cum 107.60

4 3 Km. cum 113.00

5 4 Km. cum 117.50

6 5 Km. cum 121.70

7 6 Km. cum 134.30

8 7 Km. cum 137.50

9 8 Km. cum 140.10

10 9 Km. cum 147.50

11 10 Km. cum 150.70

12 11 Km. cum 155.90

13 12 Km. cum 162.00

14 13 Km. cum 166.40

15 14 Km. cum 172.30

16 15 Km. cum 175.20

17 16 Km. cum 179.60

18 17 Km. cum 185.50

19 18 Km. cum 190.00

20 19 Km. cum 192.80

21 20 Km. cum 200.00

22 Beyond 20 and up to 30 Km (Rate/Km) cum 5.3023 Beyond 30 and up to 50 Km (Rate/Km) cum 4.7024 Beyond 50 and up to 80 Km (Rate/Km) cum 4.4025 Beyond 80 and up to 100 Km (Rate/Km) cum 4.20


27 L O A D I N G cum 11.10

28 U N L O A D I N G cum 7.60


RATES FOR CONVEYANCE OF LIME STONE, BROKEN LATERITE AND BRICK JELLY INCLUDING LOADING, UNLOADING &STACKING ON

METALLED ROAD

Common SSR 2007-08

226

Conveyance Rates

S.No. LEAD UNIT

SS Rate for

2007-08

1 2 3 4

1 0 To 250 mts. cum 96.70

2 251 To 500 mts. cum 97.50

3 1 Km. cum 100.70

4 2 Km. cum 103.10

5 3 Km. cum 108.40

6 4 Km. cum 112.90

7 5 Km. cum 117.40

8 6 Km. cum 126.40

9 7 Km. cum 131.20

10 8 Km. cum 135.90

11 9 Km. cum 140.10

12 10 Km. cum 142.80

13 11 Km. cum 148.90

14 12 Km. cum 152.10

15 13 Km. cum 158.40

16 14 Km. cum 162.00

17 15 Km. cum 166.00

18 16 Km. cum 170.10

19 17 Km. cum 174.20

20 18 Km. cum 179.30

21 19 Km. cum 184.10

22 20 Km. cum 187.30

23 Beyond 20 and up to 30 Km (Rate/Km) cum 4.8024 Beyond 30 and up to 50 Km (Rate/Km) cum 4.60


26 Beyond 80 and up to 100 Km Rate/Km) cum 3.60


28 L O A D I N G cum 8.8029 U N L O A D I N G cum 7.00


RATES FOR CONVEYANCE OF SURKI AND FLYASH INCLUDING LOADING, UNLOADING &STACKING ON METALLED ROAD

S. No.

LEAD UNIT SS Rate for

2007-08

Common SSR 2007-08

227

Conveyance Rates

1 2 3 4

1 0 To 250 mts. Tonne 82.60

2 250 To 500 mts. Tonne 83.20

3 1 Km. Tonne 86.90

4 2 Km. Tonne 91.20

5 3 Km. Tonne 93.60

6 4 Km. Tonne 97.90

7 5 Km. Tonne 101.90

8 6 Km. Tonne 110.10

9 7 Km. Tonne 114.20

10 8 Km. Tonne 117.80

11 9 Km. Tonne 121.20

12 10 Km. Tonne 125.30

13 11 Km. Tonne 128.70

14 12 Km. Tonne 132.20

15 13 Km. Tonne 136.60

16 14 Km. Tonne 139.30

17 15 Km. Tonne 143.10

18 16 Km. Tonne 147.40

19 17 Km. Tonne 150.70

20 18 Km. Tonne 155.20

21 19 Km. Tonne 158.30

22 20 Km. Tonne 161.60

23 Beyond 20 and up to 30 Km (Rate/Km) Tonne 3.70




27 Beyond 100 Km (Rate / Km) Tonne 2.90

28 L O A D I N G Tonne 14.90

29 U N L O A D I N G Tonne 9.60

30 S T A C K I N G Tonne 6.10

RATES FOR CONVEYANCE OF STEEL AND LUBRICATING OIL INCLUDING LOADING, UNLOADING &STACKING ON METALLED ROAD

S.No. LEAD UNIT

SS Rate for

2007-08

1 2 3 4

Common SSR 2007-08

228

Conveyance Rates

1 0 To 500 mts. Tonne 113.60

2 1 Km. Tonne 115.30

3 2 Km. Tonne 119.90

4 3 Km. Tonne 125.00

5 4 Km. Tonne 129.60

6 5 Km. Tonne 134.10

7 6 Km. Tonne 145.80

8 7 Km. Tonne 149.60

9 8 Km. Tonne 155.00

10 9 Km. Tonne 159.30

11 10 Km. Tonne 164.80

12 11 Km. Tonne 169.80

13 12 Km. Tonne 174.20

14 13 Km. Tonne 179.40

15 14 Km. Tonne 183.60

16 15 Km. Tonne 189.00

17 16 Km. Tonne 193.10

18 17 Km. Tonne 197.70

19 18 Km. Tonne 202.60

20 19 Km. Tonne 207.20

21 20 Km. Tonne 213.40





26 Beyond 100 Km (Rate / Km) Tonne 3.10

27 L O A D I N G Tonne 19.40

28 U N L O A D I N G Tonne 15.00

29 S T A C K I N G Tonne 8.70

NOTE:

1. The above rates are governed by the definition of carriage given under the clause 34 of PS to A.P.S.S.

2. The above rates are inclusive of Loading, Unloading and Stacking Charges (single operation). As the rates for the various items under materials include stacking charges also, the same should be deducted from the conveyance rates obtained from the table where not applicable.

3. Where sandy track and cart track are met with, the equivalent length of these tracks may be arrived by multiplying with factors 1.40 and 1.10 for

Common SSR 2007-08

229

Conveyance Rates

the length of sandy or cart track respectively and lead for the equivalent length so arrived at may be worked out for the cost of conveyance.

4. When the material like Surkhi, Flyash and Bitumen are conveyed on emergency basis to avoid Wharfage, Demurrage from Railway station/Factories to Departmental Godown which are available within a lead of 8 km., 40% extra rate shall be allowed over above rates (Subject to the condition that the Departmental Godown is not available within 8 Kms).

5. The conveyance rates of Surkhi and Flyash are allowed for conveyance of food grains under food for work program.

6. Lead with fraction should not be rounded off twice. Illustratively, if actual lead on sandy track is 10.20 Km. say, then the lead for purpose of data should be only 10.20 x 1.40 = 14.280 or 15 km and not 10.20 rounded to 11.00 multiplied by 1.40 and again rounded to 16 kms.

HIRE CHARGES

Common SSR 2007-08

230

Conveyance Rates

HIRE/USAGE CHARGES FOR PLANT AND MACHINERY

Sl. No.

Description Unit

Hire charges

( Rupees)Machine Activity

1 2 3 4 5

1 Dozer( D 80 )

Spreading

Per Hour 2400.00Cutting

Cleaning

2 Mortor Grader

Clearing

Per Hour 2260.00SpreadingGSBWMM

3 Hydraulic ExcavatorSoil Ordinary

Per Hour 1950.00Soil MarshySoil unsuitable

4 Front end loaderSoil loading Per Hour 1150.00

Aggregate loading Per Hour

5 Tipper- 5.5 CumTransportation of soil, GSB,WMM, Hot mix etc

Per Hour 500.00

Per tonne Km 3.90

Per Km 39.00

6 Vibratory roller 8 tonne Earth/Soil, GSB,WMM

Per Hour 1350.00

7Smooth wheeled roller 8 tonne

Soil compaction ,BM compaction

Per Hour 470.00

8 Water tanker 6 Kilolitre Water transport Per Hour 300.009 Tractor Pulling Per Hour 300.0010 Tractor with rotavator Scarifying Per Hour 300.00

11 Tractor with ripper attachment

Scarifying Per Hour 300.00

12 Air Compressor General purpose Per Hour 320.0013 Wet mix plant 60 TPH Wet mix Per Hour 1150.0014 Mechanical broom Surface cleaning Per Hour 250.00

Common SSR 2007-08

231

Conveyance Rates

Sl. No.

Description Unit

Hire charges


1 2 3 4 5Hydraulic

15 Bitumen Pressure Distributor

Applying bitumen tack coat

Per Hour 820.00

16Emulsion Pressure Distributor

Applying emulsion tack coat

Per Hour 600.00

17 Hot mix Plant – 120 TPH capacity

DBM/BM/SDC/Premix

Per Hour 20000.00


DBM/BM/SDC/Premix

Per Hour 17000.00


DBM/BM/SDC/Premix

Per Hour 15000.00

20 Hot mix Plant – 40 to 60 TPH capacity

DBM/BM/SDC/Premix

Per Hour 13500.00

21Paver Finisher Hydrostatic with sensor control 100 TPH

DBM/BM/SDC/Premix Per Hour 2200.00

22 Paver finisher Mechanical 100

Paving of WMM, paving of DLC

Per Hour 950.00

23 Hydraulic Chip Spreader Surface dressing Per Hour 1800.00

24 Tandem Road roller Rolling of Asphaltic surface

Per Hour 1150.00

25 Pneumatic Road roller Rolling of Asphaltic surface

Per Hour 900.00

26 Pot-Hole repair machine Repair of pot-holes Per Hour 650.00

27Bitumen boiler oil fired

Bitumen Spraying Per Hour 150.00

28 GSB Plant 50 Cum Producing GSB Per Hour 800.00

29 Mastic Cooker Mastic wearing coat

Per Hour 45.00

30Batching and Mixing Plant (a) 30 Cum capacity

Concrete mixing Per Hour 1850.00

(b) 15 - 20 Cum capacity Concrete mixing Per Hour 1450.00

31 Transit mixer Transportation of concrete mix

Per Hour 1000.00

32 Concrete pump of 45 and 30 cum

Pumping of Concrete

Per Hour 550.00

33

Cranes(a) 80 tonnes

Lifting purpose Per Hour825.00

(b) 35 tonnes 550.00(c) 3 tonnes 240.00(d)Crane with grab bucket 0.75 cum

Well foundation Per Hour 1500.00

(e)Crane with grab bucket 1 cum

Well foundation Per Hour 2500.00

34 Concrete bucket For pouring concrete

Per Hour 10.00

35 Kerb casting machine Kerb making Per Hour 220.00

36Concrete mixer

Concrete mixing Per Hour 300.00(a)0.28 cum(b) 1.0 cum Concrete mixing Per Hour 450.00

Common SSR 2007-08

232

Conveyance Rates

Sl. No.

Description Unit

Hire charges


1 2 3 4 5

37Piling rig with bantonite pump

0.75 m dia to 1.20 m dia boring attachment

Per Hour 3900.00

38Concrete paver finisher with 40 HP motor

Paving of concrete surface

Per Hour 2050.00

39

Integrated stone crusher Crushing of spalls 100 TPH

Per Hour 6150.00

Crushing of spalls 200 TPH

Per Hour 12940.00

40Pre stressing jack with pump and access Stressing of steel

wires/ stands Per Hour 92.00

41 Generator

250 KVA

Generation of electric energy

per hour 1350.00

125 KVA per hour 950.00



42 Pneumatic sinking of Plants Pneumatic sinking of wells

Per K.m. 3250.00

43 Truck 5.5 cum per 10 tonnes

Material transport Per Km. 39.00

Material transport Per tonne km

3.9

44 Road making machine Road making Per Hour 75.00

45 Mobile slurry seal equipment

Mixing and laying slurry seal

Per Hour 800.00

46Plate compacter For compacting in

medians Per Hour 32.00

47Drilling equipment

For drilling Per Hour 900.00

Note: The above hire charges of machinery & plant includes crew, oils, conveyance of machinery to site and all other incidental charges. The proposed rates approved for 2007-08 are based on the rates approved & adopted for 2006-07 by R&B Department duly considering the increase in Oil & labour charges.

Common SSR 2007-08

233

Conveyance Rates

ANNEXURE

Common SSR 2007-08

234

Seigniorage and Cess chargesi) The seigniorage charges as existing actually may be added in the data rates in

the estimates. j) ii) The revised seigniorage charges as fixed by the Government in G.O. Ms.

No. 217 Industries and Commerce (M-1) Department dated 29-9-2004, shall be as follows:

Sl.No

Name of the Minor Mineral

Unit Rates of seigniorage fee(In Rupees)

1 2 3 4

1 Building Stone M3/MT Rs 45/ 30(Rupees Forty five/Thirty)

2 Rough Stone/Boulders M3/MT Rs 45/ 30(Rupees Forty five/Thirty)

3 Road Metal & Ballast M3/MT Rs 45/ 30(Rupees Forty five/Thirty)

3(a) Dimensional Stone used for Kerbs & Cubes

MT Rs 80(Rupees Eighty)

4 Limekankar/Limestone MT

The rate of Royalty as applicable to limestone(other than L.D.Grade) in respect of Major Minerals as per the 2nd schedule of the Mines and Minerals (D&R)Act 1957.

5 Limeshell MT Rs 80(Rupees Eighty)

6 Marble M3/MT Rs.150/60(Rupees one hundred and fifty/sixty)

7 Marble Chips MT Rs.40(Rupees Forty)

8 Moram/Gravel&Ordinary earth

M3/MT Rs.20/12(Rupees Twenty/Twelve)

9

Ordinary Sand/Sand Manufactured from Boulders useful for Civil Construction

M3 Rs.36(Rupees Thirty Six)

10 Shingle M3 Rs.15(Rupees Fifteen)11 Chalcedony Pebbles MT Rs.30(Rupees Thirty)

12 Puller’s Earth/Bentonite MTRs.100(Rupees Hundred)-WhiteRs.40(Rupees Forty)-Off White

13 Shale/Slate MT Rs.100(Rupees Hundred)14 Rehmati M3 Rs.15(Rupees Fifteen)

15a(i)

a(ii)

(b)

Limestone SlabsColour

White

Black

--Rs.6(Rupees Six)per Sq.Mt or Rs.80(Rupees Eighty)per Mt Which ever is higher

--Rs.4(Rupees Four)per Sq.Mt or Rs.50(Rupees Fifty)per Mt Which ever is higher

--Rs.3(Rupees Three)per Sq.Mt or Rs.40(Rupees Forty)per Mt Which ever is higher

16

Ordinary Clay, Silt and Brick Earth used in the Manufacture of Bricks including Mangalore Tiles

--

Rs 3500 (Rupees Three thousand and five hundred)per kiln per annum for Bricks & Tiles

(Rate per Cubic metre)

17Granite useful for

Cutting & Polishing More than 270

Cms x 150 cms Size

Below 270 cm x 150 cm size

Below 75 Cm Size

a Black Granite Galaxy Rs.3000/- Rs.2250/- Rs.1000/-

Common SSR 2007-08

235

Variety (Rupees three thousand)

(Rupees Two thousand two hundred and fifty)

(Rupees one thousand)

b. Black Granite other than Galaxy Variety

Rs.2250/-(Rupees Two thousand two hundred and fifty)

Rs.1750/-(Rupees one thousand seven hundred and fifty

Rs.750/-(Rupees Seven hundred and fifty)

c.

Colour Granite of Srikakulam Blue,Indian Aurora of Nizamabad District,Leptinites of Coastal Dists,Black Pearl of Prakasam &Guntur District

Rs.2250/-(Rupees Two thousand two hundred and fifty



d.Colour Granite of other Varities


Rs.1500/-(Rupees One thousand and five hundred)


Note: In respect of Black Galaxy Granite, Incentive of Rs.250(Rupees two hundred and fifty)per Cubic meter is allowed for the Blocks above 75 cms provided they are processed in the Granite industry within State/Country

SCHEDULE – II

Rates of Dead Rent

Sl No Name of the Minor Mineral Rate of Dead Rent per hectare per Annum

1 2 3

1 Black Granite Rs.50,000/-(Rupees fifty thousand)

2 Colour Granite Rs.40,000/-(Rupees forty thousand)

Common SSR 2007-08

236

3

Limestone other than classified Major Minerals used for Lime burning for Building construction purpose, Marble, Boulders, Building stone includingstone used for road metal, Ballast concrete and other construction purposes shale, slate and Phylits, Mosaic Chips, Fuller’s Earth/Bentonite

Rs. 25,000/- (Rupees twenty five thousand)

4

Gravel, Morrum, Shingle, Lime Stone Slabs used for flooring purposes, Lime Kankar, Chalcedeny Pebbles used in the Building purposes, Lime Shell for burning used for building purposes and Rehmatti

Rs. 15,000/- (Rupees fifteen thousand)

NOTE: -

1) The above rates are liable to be revised and amended from time to time by the State Government by Notification in the Andhra Pradesh Gazette.

2) In case of revision the revised rates as fixed by Mines and Geology Department have to be adopted.

Common SSR 2007-08

237

Copy of

GOVERNMENT OF ANDHRA PRADESHIRRIGATION & CAD (PW:COD) DEPARTMENT

ABSTRACT

I & CAD Department – Scrapping of manual rate of earth work from the estimates - Adoption of the machine rate in all cases for earth work excavation where the quantity exceeds 1000 cum – Amendment to Para 1.05 of Annexure.I of G.O.Ms.No.23, I & CAD (PW) Department dated: 05-3-1999 – Orders – Issued.

G.O.Ms.No.134, Dated: 25-11-2002Read the following:

1) G.O.Ms.No.23, I & CAD (PW) Department dt:05-3-1999.2) From the Engineer-in-Chief (AW) Letter No.ADA/TC1/BOCE-3 item.3/ 2002,

dt:05-9-2002.

***ORDER:

In the circumstances reported by the Engineer-in-Chief (Admn. Wing) and recommendations of Board of Chief Engineers, Government after careful examination of the matter hereby issue amendment to Para 1.05 of Annexure.I of the G.O.Ms.No.23, I & CAD ( PW:COD ) Department dated:05-3-1999 in super cession of the earlier orders issued in the matter to adopt machine rates in all the cases for earth work excavation where the quantities exceed 1000 cum with relaxation on the following items of works:

1) Earth work excavation for seating to lining for a depth of 0.10m to 0.15m for Canals / Channels.

2) Removal of silt and slushy soils from the Canals / Channels where depth of removal is less than 0.30 m.

3) Earthwork excavation for restricted foundation for small structures building foundations etc.,

4) Silt in slushy soils removal in lined canals, where movement of machinery is restricted.

5) Earth work Excavation for model sections, chutes etc., where the movement of machinery is restricted.

2. This order issues with the concurrence of Finance (Works & Projects) Department vide their U.O.No.7335 / F8 (2)/2002-1, dated:18-11-2002.

J.HARINARAYANPRINCIPAL SECRETARY TO GOVERNMENT

Copy ofGOVERNMENT OF ANDHRA PRADESH

Common SSR 2007-08

238

ABSTRACT

R&B – Constitution of Committee of Chief Engineers for finalization of SSR for both electrical and civil items specific to the functioning of buildings works – Accorded – Orders - Issued

TRANSPORT, ROADS & BUILDINGS (R.1) DEPARTMENT

G.O.Rt.No.471, Dated: 20-04-2007Read the following:

1. Govt Memo. No.48425/ B.I (1)/ 2006, dt: 06-1-2007.3) From the Chief Engineer (R&B) Buildings Letter No. TA8/ JE3/ SSR-2006-07 dt:17-11-

2006 and dt. 8-1-2007.

*******

ORDER:

In the circumstances reported by the Chief Engineer (R&B) Buildings in his letters 2nd read

above, Government after careful examination of the matter hereby constitute a Committee with

the following Engineer-in-Chief and Chief Engineers of departments in-charge of execution of

building works, for finlisation of SSR for both electrical and civil items specific to the functioning

of building works: -

1. Engineer-in-Chief, Public Health Engg. : Member2. Chief Engineer(R&B)Buildings, : Member Convener3. Chief Engineer, Panchayat Raj : Member4. Chief Engineer,AP Housing Board : Member5. Chief Engineer, Greater Hyderabad (MCH) : Member6. Chief Engineer, AP Housing Corporation : Member7. Chief Engineer, APSRTC : Member8. Chief Engineer, APHMHIDC : Member9. Superintending Engineer (R&B), Electrical Circle, Hyd : Member

2. The Chief Engineer (R&B) Buildings shall take necessary further action accordingly.

3. This order issues with the concurrence of Finance Department vide their U.O.No.3326/ 342/ A2/

Expr.PW/ 07. dt. :3-4-2007.

(BY ORDER AND IN THE NAME OF THE GOVERNOR OF ANDHRA PRADESH)

T.CHATTERJEEPRINCIPAL SECRETARY TO GOVERNMENT

To,The Chief Engineer (R&B) Buildings, HyderabadAll the Member concerned | through the CE(R&B) Buildings |Copy to:The PS to Minister R&B and Ports The I & CAD (Reforms) Department The PS to thePrl. Secretray to Government (TC), TR&B,SF/ SC

FORWARDED BY ORDER

Common SSR 2007-08

239

Documents

Building SSR 2007 08