OWNER’SMANUAL

PINPOINTER

First Texas Products, L.L.C.

1-YR LIMITEDWARRANTY

This product is warranted against defects inmaterials and workmanship under normal usefor one year from the date of purchase to theoriginal owner. Liability in all events is limited tothe purchase price paid. Liability under thisWarranty is limited to replacement or repair, atour option, of the product returned, shipping costprepaid, to First Texas Products, L.L.C. Damagedue to neglect, accidental damage or misuse ofthis product is not covered by the warranty.

According to FCC part 15.21 Changes or Modifications made to thisdevice not expressly approved by the party responsible for

compliance could void the users authority to operate this equipment.

Proof of purchase is required to make a claim under this warranty.

NOTE TO CUSTOMERS OUTSIDE THE U.S.A.This warranty may vary in other countries; check with

your distributor for details.Warranty does not cover shipping costs.

First Texas Products, L.L.C.1465 Henry Brennan

El Paso, TX 79936800-413-4131

MPP Rev.4 040814

PinPointerFor Treasure Huntingand unearthing smallobjects

After identifying the presence of ametal object in the ground with ametal detector, pinpointing its exactlocation, and separating it from theearth, can be difficult and timeconsuming.

With the PinPointer, retrievingcoins and other small metal objectsis easy.

UnearthingSmall Objects

A buried object, especially afterthe passage of time, can beindistinguishable from the soil it isburied in. In addition, historicalobjects will lose value if damaged inthe unearthing process.

It is therefore recommended touse the PinPointer in a probing orsifting process. The tip of thePinPointer will detect a coin-sizedmetal object approximately 3/4”away from the tip of the probe. Probethe tip of the PinPointer directly intothe ground; poke around directly onthe surface in different areas until theinternal buzzer activates. If the earthis loose enough, lift handfuls of soilout of the ground and probe in thepalm of your hand with thePinPointer.

OWNER’SMANUAL

PINPOINTER

PinPointerFor Treasure Huntingand unearthing smallobjects

After identifying the presence of ametal object in the ground with ametal detector, pinpointing its exactlocation, and separating it from theearth, can be difficult and timeconsuming.

With the PinPointer, retrievingcoins and other small metal objectsis easy.

UnearthingSmall Objects

A buried object, especially afterthe passage of time, can beindistinguishable from the soil it isburied in. In addition, historicalobjects will lose value if damaged inthe unearthing process.

It is therefore recommended touse the PinPointer in a probing orsifting process. The tip of thePinPointer will detect a coin-sizedmetal object approximately 3/4”away from the tip of the probe. Probethe tip of the PinPointer directly intothe ground; poke around directly onthe surface in different areas until theinternal buzzer activates. If the earthis loose enough, lift handfuls of soilout of the ground and probe in thepalm of your hand with thePinPointer.

First Texas Products, L.L.C.

1-YR LIMITEDWARRANTY

This product is warranted against defects inmaterials and workmanship under normal usefor one year from the date of purchase to theoriginal owner. Liability in all events is limited tothe purchase price paid. Liability under thisWarranty is limited to replacement or repair, atour option, of the product returned, shipping costprepaid, to First Texas Products, L.L.C. Damagedue to neglect, accidental damage or misuse ofthis product is not covered by the warranty.

According to FCC part 15.21 Changes or Modifications made to thisdevice not expressly approved by the party responsible for

compliance could void the users authority to operate this equipment.

Proof of purchase is required to make a claim under this warranty.

NOTE TO CUSTOMERS OUTSIDE THE U.S.A.This warranty may vary in other countries;check with

your distributor for details.Warranty does not cover shipping costs.

First Texas Products, L.L.C.1465-H Henry Brennan

El Paso, TX 79936800-413-4131

MPP Rev.4 040814

BHpinpointer(printer).qx6 4/8/14 2:55 PM Page 1

Operation1. Install Battery (see Figure A)2. Click On by rotating the knob clockwise.3. Battery Check

The PinPointer will buzz immediately,indicating that the batteries are in goodcondition.If the buzzer does not sound after switchingon, replace the single 9-volt battery.

4. Set the SensitivityA. Starting with the knob in a position where

the buzzer is making sound, rotate knobclockwise to the point where the deviceis just silent. (Figure B)

B. You want to position the knob in themost counterclockwise position atwhich the buzzer is still silent. Thisthreshold setting provides maximumsensitivity. (Figure C)

5. During use, periodically re-set the knobfor maximum sensitivity.

Operation1. Install Battery (see Figure A)2. Click On by rotating the knob clockwise.3. Battery Check

The PinPointer will buzz immediately,indicating that the batteries are in goodcondition.If the buzzer does not sound after switchingon, replace the single 9-volt battery.

4. Set the SensitivityA. Starting with the knob in a position where

the buzzer is making sound, rotate knobclockwise to the point where the deviceis just silent. (Figure B)

B. You want to position the knob in themost counterclockwise position atwhich the buzzer is still silent. Thisthreshold setting provides maximumsensitivity. (Figure C)

5. During use, periodically re-set the knobfor maximum sensitivity.

UNTI

L“J

UST

SILE

NT”

ROTA

TEKN

OBS-

L-O-

W-L-

Y

“JUSTSILENT”

TOO FAR INTOSILENT-ZONE

BUZZING

UNTI

L“J

UST

SILE

NT”

ROTA

TEKN

OBS-

L-O-

W-L-

Y

“JUSTSILENT”

TOO FAR INTOSILENT-ZONE

BUZZING

Figure A Figure B Figure C

Figure A Figure B Figure C

BHpinpointer(printer).qx6 4/8/14 2:55 PM Page 2