BUS SYSTEM, TRAM SYSTEM, TRACK SYSTEM AND TRACK … · the bus system – which thus allows to design city scenes with tram and bus traffic. The structure of vehicles is similar to

2018

www.faller.de

N GAUGE MADE IN JAPAN – JAPANESE MODELS CONQUER THE WORLD OF SCALE MODELLING!

BUS SYSTEM, TRAM SYSTEM, TRACK SYSTEM AND TRACK CLEANING

32

TOMYTEC Scale modelling inspired by Japanese and European originals

TOMYTEC is well known far beyond the frontiers of Japan as a manufacturer of high-quality model railway products and a comprehensive range of accessories focusing on the N track gauge.

That wide range offers tracks in various designs, points, crossings, and of course matching accessories such as transformers and speed controllers, connecting cables and signals, cleaning rails or turntables.

The bus system also brings a lot of movement in the streets. Bus models, which can be made mobile with motorizable chassis, offer a particular eye-catching feature on a model railway installation. There is also a tram system to match which is accurately adapted to the radii of curves of the bus system. Thus both systems make it possible to reproduce city scenes with tram and road traffic very realistically.

Another highlight in that range of products are track cleaning carriages. Although of simple technical design, they thoroughly serve their purpose: cleaning tracks by the wet or dry process, vacuuming and grinding them, if required.

The wide range of Japanese high-speed trains, building models that are easy to assemble as well as accessories and decoration parts complement the production programme.

On the following pages youwill find all the interesting factsabout our track cleaning carriages.

CONTENTS

TRACK CLEANING CARRIAGE 4The right way to maintain your tracks!

BUS SYSTEM 7Fascinatingly simple!

TRAM SYSTEM 12Tramways

TRACKS 17Tomix tracks offer the greatest diversity!

SPEED CONTROLLERS 32How to compute current consumption properly.

TRANSFORMERS AND CONTROL SYSTEM 34Einfach und vor allem sicher!

VEHICLES 36Vehicles for model railway installation.

KITS 39Most varied building models in various designs!

ROLLING STOCK 42Shinkansen and bogies

BU

S -S

YSTE

M

BU

S- S

YSTE

M

CO

NTE

NTS

54

It sucks up dust and lightweight dirt through an extractor and collect them in a bin. Quickly replace the suction attachment with the grinding or polishing wheel using the special tool supplied, and track maintenance just goes on. For wet cleaning a cleansing agent may be used that is poured into a small tank located within the vehicle.

Extractor and polishing/grinding wheel are operated by their own motor – while the vehicle itself requires a railway engine to drag the cleaning trailer.

TRACK CLEANING CARRIAGEThe right way to maintain your tracks!

TOMYTEC’s track cleaning carriage offers various ways of maintaining tracks, whether they are hardly accessible, dirty or corroded.

The track cleaning carriage is supplied complete with suction attachment, three polishing and three grinding wheels, mounting tool, sponge and brush as well as detailed instructions in several languages.

Operating the track cleaning vehicle is recommended only on analogue circuits! Accessories to buy separately include the polishing and grinding wheels as well as springs for the rotating ring.

Spare attachments for track cleaning carriage Art. 976424 20 polishing and 10 grinding wheels.

Track cleaning carriage, blue Art. 976425 With suction attachment, three polishing and three grinding wheels, mounting tool, sponge and brush. Perfect to clean, grind and polish all commercially available N tracks. A railway engine is required to trail it.

Track cleaning carriage, transparentArt. 976426 With suction attachment, three polishing and three grinding wheels, mounting tool, sponge and brush. Perfect to clean, grind and polish all commercially available N tracks. A railway engine is required to trail it.

Spare springs for track cleaning carriage Art. 971263 Spare springs for current input in the bogies of track cleaning carriage, 4 pieces, 7.5 mm long.

Spare attachments for track cleaning carriage Art. 976423 Three polishing and three grinding wheels, one brush and one sponge.

SCH

IEN

ENR

EIN

IGU

NG

TRAC

K C

LEAN

ING

CAR

RIAG

E

TRA

CK

CLE

AN

ING

CA

RR

IAG

E

76

A great number of functions (stop points, bus stops and intersections) are a source of much fun and pleasure. Tomytec’s bus system is fascinatingly simple. Roads are ready-made and provided with a wire that guides the vehicles. There are bus stops and branch-off junctions to actuate manually. Road elements are 6 mm high and 37 mm wide. And are available in various lengths, radii and designs. Moreover, roads perfectly match TOMYTEC’s tram system – thus allowing to create fantastic city scenes with tram and bus traffic.

BUS SYSTEMFascinatingly simple!

Assemble ready-made road elements as you wish without any difficulty, switch the vehicles on, and the fun begins!

Buses – like trams – are available as stationary models. Such models can be made mobile by retrofitting using a chassis powered by two round cells of type LR44 (the new European types also accomodating LIPO rechargeable batteries that can be charged via a USB port). Conversion is easy: without requiring any tool, the base is taken out of the bus and the chassis is pressed in – it’s ready!

LIPO batteries are charged via a USB connector. Approximately 20 minutes of charging time are sufficient for about 2 hours of running time.

Bus system, Mercedes Citaro SetArt. 970356 Bus system, with vehicle (Citaro in silver), USB charging cable, roads, links, spare tyres and bus stop.

Bus system, GMC SetArt. 975799 Bus system, with vehicle type GMC, USB charging cable, roads, links, spare tyres and bus stop.

BU

S -S

YSTE

M

BUS-

SYST

EMBU

S SY

STEM

BU

S SY

STEM

98

Bus system, GMC bus GreenArt. 976435 Bus system, GMC bus Green. Bus system, American GMC bus in green. Ready-made model, expandable for operation on TOMYTEC’s road system by installing a chassis 974583.

Bus system, GMC bus YellowArt. 976433 Bus system, GMC bus Yellow. Bus system, American GMC bus in yellow. Ready-made model, expandable for operation on TOMYTEC’s road system by installing a chassis 974583.

Bus system, GMC bus OrangeArt. 976434 Bus system, GMC bus Orange. Bus system, American GMC bus in orange. Ready-made model, expandable for operation on TOMYTEC’s road system by installing a chassis 974583.

Bus system, 6 curves, Ø 30, r 177 mmArt. 973190 Width 37 mm. For TOMYTEC’s bus system.




Bus system, Citaro HV VArt. 974552 Bus system, Citaro bus of Hamburg football club HVV. Ready-made model, expandable for operation on TOMYTEC’s road system by installing a chassis 976297.

Bus system, Citaro PTTArt. 974569 Bus system, Citaro bus of Swiss postal service PTT. Ready-made model, expandable for operation on TOMYTEC’s road system by installing a chassis 976297.

Bus system, Citaro SilverArt. 974576 Bus system, Citaro bus, neutral in silver. Ready-made model, expandable for operation on TOMYTEC’s road system by installing a chassis 976297.

Bus stop, right-hand side (Europe)Art. 976479 Bus stop for left-hand drive, bus stop on the right side.

Bus system, 6 straightsArt. 975418 Width 37 mm, length 70 mm. For TOMYTEC’s bus system.

Bus system, Citaro DBArt. 974545 Bus system, Citaro bus of Deutsche Bahn. Ready-made model, expandable for operation on TOMYTEC’s road system by installing a chassis 976297.

Bus system, Bus stop Art. 973211 Bus stop composed of 4 road elements each 70 mm long, waiting shelter with decoration, stop function and magnets.

Bus system, Intersection SetArt. 975422 4 x straight with stop function, 4 x straight, 6 x curve C177, 6 x curve 214. Two-lane, change of direction manually switchable.

BU

S -S

YSTE

M

BU

S- S

YSTE

M

BU

S SY

STEM

BU

S SY

STEM

1110

Bus system, Start Set AArt. 972823 Motorized chassis for buses, bus body like Hino Osaka Bus, bus stop with stop function, road oval composed of 6 curves with 103 and 140 mm radius respectively, 8 straights of 70 mm, bus stop.

Bus system, Set AArt. 975689 1 x motorized chassis, 2 bus bodies (1 x printed and 1 x unprinted), 2 bus stops with stop function and shelters, various road parts and small parts allowing to build a circuit with 1400 x 170 mm area.

Bus system, Intersection, left-hand trafficArt. 977115 Intersection composed of four parts, and matching links.

Bus system, Track Set AArt. 975417 For an oval, including stop point, base surface area 563 x 281 mm.

Bus system, Power chassis WMB-L02, CitaroArt. 976297 Power chassis for Citaro buses, including 2 spare tyres, USB charging cable and assembly instructions.

Bus system, Power chassis WMB-L01, GMCArt. 974583 Power chassis for GMC buses, including 2 spare tyres, USB charging cable und assembly instructions.


Bus system, 4 straights with manual stop functionArt. 975419 Width 37 mm, length 74 mm, with manual stop function for TOMYTEC’s bus system.

Bus system, 4 straightsArt. 975829 Width 37 mm, length 70 mm. For TOMYTEC’s bus system.

Bus system, Spare tyres 6.5 x 12 mm, 50 pieces Art. 975078 Spare tyres for buses.

Bus system, Spare tyres 6.2 x 12 mm, 50 pieces Art. 975085 Spare tyres for buses.

BU

S -S

YSTE

M

BU

S- S

YSTE

M

BU

S SY

STEM

BU

S SY

STEM

1312

Design your scenes and installations with realistic tram operation! Diverse vehicle and track variants ensure plenty of action and activity. And the radii of rails are exactly those of the bus system – which thus allows to design city scenes with tram and bus traffic. The structure of vehicles is similar to that of the bus system: the base of stationary models can just be removed without using any tool, and the motorized chassis is pressed in – ready! Chassis are provided with flywheel mass, motor and current input on all axles.

TRAM SYSTEMTramways

Simply versatile – it’s TOMYTEC’s tram system!

Tracks for the trams are easy to assemble and dismantle. There are various lengths, radii of curves and surface finish such as concrete surface, pavement or simply ecological grass covering. Of course tram tracks can be combined with the range of rails so that points and signals can be used, while control procedures are ensured via transformers and speed controllers from TOMYTEC’s range of products. Power supply is safe and easy through connectors. Rail height up to top edge is 6 mm. You will find all details on the topic Tracks on pages 17 to 31.

Tram system, Start Set, MunichArt. 970143 With 3-piece Munich Tram, motorized chassis, selection of tracks for an oval (420 x 280 mm), transformer, connection cable and plug adapter for European users.

Tram system, Berlin Tramway, type 1000Art. 974253 Stationary model of a three-carriage tram of Berlin public transport company, with piece of track. Model can be motorized using chassis 978710.

Tram system, Munich Tramway, type 2000Art. 974260 Stationary model of a three-carriage tram of Munich public transport company, with piece of track. Model can be motorized using chassis 978710.

Motorized chassis, TM-LRT04, for three-carriage trains, tramsArt. 978710 Motorized chassis for tram stationary model with three carriages. Pivot pitch 118.2 mm, axle base 12 mm. Not suitable for Super Mini Tracks.

TRA

M-S

YSTE

M

TRAM

-SYS

TEM

TRA

M S

YSTE

M

TRAM

SYS

TEM

1514

Tram system, Stationary model, Hiroshima Electric LRT Piccola Art. 975538 Stationary model, can be converted into a mobile model for tram system with chassis TM-LRT03.

Tram system, Stationary model, Kumamoto City, type 5000Art. 976445 Stationary model, can be converted into a mobile model for tram system with chassis TM-LRT03.

Tram system, Stationary model, Toyama Tramway LRT, type T100Art. 977266 Stationary model, can be converted into a mobile model for tram system with chassis TM-LRT02.

Motorized chassis, TM-TR01, for trams Art. 975981 Motorized chassis for trams, axle base 9.2 mm. With motor, flywheel mass, rotary articulation, drive on four axles. Pivot pitch can be adjusted between 36/38.6 and 41.2 mm.

Tram system, Stationary model, Hankai Tramway, type 1001Art. 975657 Stationary model, can be converted into a mobile model for tram system with chassis TM-LRT02.

Tram system, Stationary model, Hankai Tramway MO, type 161 NankaiArt. 976597 Stationary model, can be converted into a mobile model for tram system with chassis TM-TR04.

Motorized chassis, TM-LRT01, for tramsArt. 975977 Motorized chassis for trams, pivot pitch 61 mm, axle base 12 mm, length 120 mm. With motor, flywheel mass, rotary articulation, drive on four axles.

Motorized chassis, TM-TR04, for tramsArt. 976596 Motorized chassis for tram stationary models. Axle base 46.4 mm.

Tram system, Stationary model, Hankai Tramway MO, type 161 greenArt. 976582 Stationary model, can be converted into a mobile model for tram system with chassis TM-TR04.

Tram system, Stationary model, Hankai Tramway LRT, type 1001Art. 977267 Stationary model, can be converted into a mobile model for tram system with chassis TM-LRT02.

Motorized chassis, TM-LRT03, for tramsArt. 975469 Motorized chassis for trams, pivot pitch 62.8 mm, axle base 12 mm, length 108 mm, height 18 mm, width 15 mm. With motor, flywheel mass, rotary articulation, drive on four axles.

Motorized chassis, TM-TR03, for trams Art. 976448 Motorized chassis for trams, pivot pitch 72 mm, axle base 9.2 mm, length 118 mm. With motor, flywheel mass, rotary articulation, drive on four axles. Front bogie adjustable in various positions.

Tram system, Stationary model, IyoRailway, type 2000 MOHAArt. 976695 Stationary model, can be converted into a mobile model for tram system with chassis TM-TR01.

Motorized chassis, TM-LRT03, for Tram PiccolaArt. 975979 Motorized chassis for trams, pivot pitch 76 mm, axle base 12 mm. With motor, flywheel mass, rotary articulation, drive on four axles.

Motorized chassis, TM-LRT02, for tramsArt. 975468 Motorized chassis for trams, pivot pitch 62.8 mm, axle base 12 mm, length 108 mm, height 18 mm, width 15 mm. With motor, flywheel mass, rotary articulation, drive on four axles.

Tram system, Stationary model, Toyohashi Rail Road, type T1001Art. 975658 Stationary model, can be converted into a mobile model for tram system with chassis TM-LRT02.

Tram system, Stationary model, Santram, type T102 Art. 975656 Stationary model, can be converted into a mobile model for tram system with chassis TM-LRT02.

TRA

M-S

YSTE

M

TRA

M-S

YSTE

M

TRA

M S

YSTE

M

TRA

M S

YSTE

M

1716

TOMYTEC’s track system offers a large, most varied choice and is compatible with nearly all tracks of other manufacturers as well as the current N gauge vehicles. With more than 150 different designs Tomix Tracks offer the greatest diversity in the trade. Tracks are easy to assemble thanks to their plug-in system. Points, buffer stops, curves with superelevation, bridges and many others more complement the product line. Tracks are suitable for both, digital and analogue drive, digital drive requiring the right decoder for the points. The following track types are available:

1. Ballasted, narrow track bedding, sleepers made of wood, straight and curved.

2. Ballasted, narrow track bedding, sleepers made of concrete, straight and curved.

3. Ballasted, broad track bedding, sleepers made of concrete, straight and curved, curved tracks also available with superelevation.

4. Tracks in viaduct bedding, concrete, straight and curved, two-track and single-track.

5. Tracks in viaduct bedding, ballasted, straight and curved, two-track and single-track.

6. Tram tracks in concrete bedding, straight and curved.

TRACKSTomix tracks offer the greatest diversity!

TOMYTEC has about 150 different tracks in its range of products!

GOOD TO KNOW!

Standard track, straight: 5-1/2" 140 mmStandard track, curved: 11" 280 mm radius, 45°Spacing from centre to centre, double tracks: 37 mmMaterial: nickel silverTrack code: 80Bedding height up to top edge rail: 6 mmBasic grid: 70 mm

Track Set for an oval, concrete sleepersArt. 970251 Track set for a turnout. With 2 points, 4 straights 280 mm, 1 straight 140 mm, 2 straights 72.5 mm and 2 curves: radius 541 mm/angle 15°.

The advantages are, among others:The different radii of the tracks allow an accurate fit on double-track lines. This also makes it possible to represent realistic curves by means of a superelevation. Very small radii are possible with »Super-Curved-Tracks«.

GLE

IS-S

YSTE

M

TRAC

K SY

STEM

TRA

CK

SYS

TEM

1918

70 mm 140 mm

Track, straight

Crossing Track

Buffer Track with illuminated lantern

Buffer Track

Prellbock, breit

Tram Crossing Track

Tram Track, straight



Track, straight

Wide Track, straight



Track, straight

Buffer Track with illuminated lantern

Track, straight

Track, straight

Track, straight

Track, straight

Truss Bridge

Electric Double Crossover Point

Track, straight


140 mm 280 mm 1120 mm

Girder Bridge

Track with Wheel Cleaning Device

Double Track

Track with Rerailing Device

70 mm

Girder Bridge, without Track

Insulator Track






Track, straight

Double Track

Double Track Truss Bridge


Wide Girder Bridge

Track, straight

Extensible Track

Uncoupler Track with Light Pole

Wide Extensible Track

Double Track, straight

SYNOPSIS OF TRACKSHere is a synopsis of the types of tracks available, with lengths and radii respectively. On the following pages you will find the different articles arranged in groups according to product lines

Viaduct bedding q from page 20

Concrete bedding (Tram) q from page 22

Ballast bedding q from page 24

高架橋付レール

HC24

3-45（

F）

212 mm

Electric Y-Points

3-way Point

right le�

Electric Y-Points, le�

Crossing Track

Crossing Track

Track, straight

Track, straight

Platform with Control Unit

Track, straight

Crossing Track


Electric Y-Points, right

le�

Curved

Curved Track

Electric Points : right

Double Track

Manual Point:


Mini-Curved

45°

Curved Track22.5°

Curved Track, W

ide

45°

45°45°

45°

Tram

Tra

ck, M

ini C

urved, Wide

60°30°

60°30°

22.5°

Curved

Tra

ck, W

ide

45°

15°

15°15°30°

15°

Curved, Wide

15°

15°

15°

15°

15°

15°

15°

45°

30°

45°

15°

45°

45°

70 mm 140 mm

70 mm 140 mm 280 mm

Viaduktbe�ung Betonbe�ung Scho�erbe�ung

Curved Point


HC24

3-45（

F）

212 mm

Electric Y-Points

3-way Point

right le�


Crossing Track

Crossing Track

Track, straight

Track, straight


Track, straight

Crossing Track



le�

Curved

Curved Track


Double Track

Manual Point:


Mini-Curved

45°

Curved Track

22.5°

Curved Track, W

ide

45°

45°45°

45°

Tram

Tra

ck, M

ini C

urved, Wide

60°30°

60°30°

22.5°

Curved

Tra

ck, W

ide

45°

15°

15°15°30°

15°

Curved, Wide

15°

15°

15°

15°

15°

15°

15°

45°

30°

45°

15°

45°

45°

70 mm 140 mm

70 mm 140 mm 280 mm


Curved Point


HC24

3-45（

F）

212 mm

Electric Y-Points

3-way Point

right le�


Crossing Track

Crossing Track

Track, straight

Track, straight


Track, straight

Crossing Track



le�

Curved

Curved Track


Double Track

Manual Point:


Mini-Curved

45°

Curved Track

22.5°

Curved Track, W

ide

45°

45°45°

45°

Tram

Tra

ck, M

ini C

urved, Wide

60°30°

60°30°

22.5°

Curved

Tra

ck, W

ide

45°

15°

15°15°30°

15°

Curved, Wide

15°

15°

15°

15°

15°

15°

15°

45°

30°

45°

15°

45°

45°

70 mm 140 mm

70 mm 140 mm 280 mm


Curved Point

GLE

IS-S

YSTE

M

GLE

IS-S

YSTE

MTR

AC

K S

YSTE

M

TRA

CK

SYS

TEM

2120

2 Double tracks, straight, in ballasted viaduct bedding, each 1120 mm Art. 971069

Track spacing 37 mm. Bedding height up to top edge rail 6 mm, basic grid 70 mm.

2 Double tracks, straight, in concrete viaduct bedding, each 280 mm Art. 971067 2 Double tracks, straight, in concrete viaduct bedding, each 140 mm Art. 971066 2 Double tracks, straight, in concrete viaduct bedding Art. 971070 4 Double tracks, straight, in concrete viaduct bedding, each 140 mm Art. 971047

Track spacing 37 mm. Bedding height up to top edge rail 6 mm, basic grid 70 mm.

4 Tracks, straight, in concrete viaduct bedding, each 140 mm Art. 971821 4 Tracks, straight, in concrete viaduct bedding, each 280 mm Art. 971822 4 Tracks, straight, in concrete viaduct bedding, each 99 mm Art. 971825 4 Tracks, straight, in concrete viaduct bedding, each 99 mm Art. 971826 4 Tracks, straight, in concrete viaduct bedding, each 99 mm Art. 971871

With concrete sleepers. Track code 80, bed-ding height up to top edge rail 6 mm, basic grid 70 mm, parallel spacing from centre to centre 37 mm.

With concrete sleepers. Track code 80, bedding height up to top edge rail 6 mm, basic grid 70 mm, parallel spacing from centre to centre 37 mm. 4 Tracks, curved, in concrete viaduct bedding, 45°, r 317 mm Art. 971872 4 Tracks, curved, in concrete viaduct bedding, 45°, r 243mm Art. 971873

Track spacing 37 mm. Bedding height up to top edge rail 6 mm, basic grid 70 mm. 2 Double tracks, curved, in concrete viaduct bedding, 45°, r 465 mm Art. 971168 2 Double tracks, curved, in concrete viaduct bedding, 45°, r 465 mm Art. 971169

With concrete sleepers. With curve superelevation. You need Art. 1753 as start track. 4 Tracks, curved, in concrete viaduct bedding, 45°, r 345 mm Art. 971874

2 Tracks, straight, in concrete viaduct bedding, each 99 mm Art. 971075

Track code 80, bedding height up to top edge rail 6 mm, basic grid 70 mm, parallel spacing from centre to centre 37 mm.

VIADUCT BEDDING: Tracks in viaduct bedding, ballasted or with concrete slabs.

The version with ballast is mainly used for bridges. The version with concrete slabs, in contrast, rather for high-speed trains. The originals of the socalled slab tracks or ballastless tracks (tracks without any ballast) are nearly maintenance-free, require little mounting depth, ensure high reliability and present better noise and vibration characteristics.

TRA

CK

SYS

TEM

TRA

CK

SYS

TEM

2322

4 Tram tracks, straight, 70 mm, pavement Art. 971794 Tracks for tram system in pavement design, 4 tracks.

4 Tram tracks, straight, each 70 mm long, in concrete beddingArt. 971792 4 Tram tracks, straight, each 70 mm long, in concrete bedding.

4 Tram tracks, straight, each 140mm long, in concrete beddingArt. 971793 Tracks for tram system in concrete design, 4 tracks with link.

Tram system, Track linkArt. 970113 For TOMYTEC trams, 32 pieces, made of plastic.

Tram Tracks, Basic setArt. 971085 8 Tram tracks, supply terminal and joining clips for bedding. Version: 2 x 140 mm, 6 curves: radius 103 mm/angle 60°, with street bedding.

Tram Tracks, Basic setArt. 971086 10 Tram tracks, supply terminal and joining clips for bedding. Version: 2 x 140 mm, 2 curves with each radius 177 mm/angle 60°, radius 177 mm/angle 30°, radius 140 mm/angle 40°.

Tram tracks, Basic set pavement Art. 971084 Tram tracks for an oval 495 x 365 mm, in pavement version. 2 curves with each radius 140 mm/angle 30°, radius 140 mm/angle 60°, radius 177 mm/angle 60°, radius 177 mm/angle 30°, 2 straights 140 mm. Including bus stop, connection cable and holding clips.

8 Tram tracks, straight, 70 mm, grass Art. 971789 Tracks for tram system in grass-covered version, 8 tracks with link.4 Tram tracks, curved, Mini Curved,

with broad concrete beddingArt. 971796 4 pieces, 2 x 30° angle, 2 x 60° angle. Radius 140 mm.

4 Tram tracks, curved, Super Curved, with broad concrete beddingArt. 971795 4 pieces, 2 x 30° angle, 2 x 60° angle. Radius 103 mm.

4 Tram tracks, curved, Mini Curved, with broad concrete beddingArt. 971797 4 pieces, 2 x 30° angle, 2 x 60° angle. Radius 177 mm.

Tram system, Filling piecesArt. 973076 Filling pieces for respectively a semicircle in radius 103 mm, 144 mm or 177 mm, for four straight tracks 140 mm, as well as points 1231 and points 1232, and parts for a tram stop. In pavement version.

Tram system, Filling piecesArt. 973079 Filling pieces for respectively a semicircle in radius 103 mm, 144 mm or 177 mm, for four straight tracks 140 mm, as well as points 1231 and points 1232, and parts for a tram stop. In asphalt version.

4 Tram tracks, straight, in concrete beddingArt. 971798 4 pieces, 18.5, 47.5 mm and 2 x 37 mm long.

Tram system, 90° intersectionArt. 971799 Tram tracks, intersection. With joining clips and an intersection. 2 straights of each: 18.5 mm and 47.5 mm as well as 4 straights 37 mm.

Tram tracks, Basic setArt. 971088 Tram tracks with joining clips and an intersection. One curve each with radius 140 mm/angle 30°, radius 140 mm/angle 60°, radius 177 mm/angle 60°, radius 177 mm/angle 30°, 2 straights of each: 18.5, 47.5 and 70 mm and 4 straights 37 mm.

CONCRETE BEDDING: Tracks in concrete beddings are used for trams. Additionally there are also versions with grass covering and others with pavement.

TRA

M T

RA

CK

S

TRA

M T

RA

CK

S

2524

BALLAST BEDDING: Tracks in ballast bedding with concrete or wooden sleepers. The most common type of track.

Curved variants from page 26, matching points from page 28.With concrete sleepers. Track code 80, bedding height up to top edge rail 6 mm, basic grid 70 mm, parallel spacing from centre to centre 37 mm. 12 Tracks, straight, in ballast bedding, each 280 mm Art. 971093 4 Tracks, straight, in ballast bedding, each 140 mm Art. 971011 4 Tracks, straight, in ballast bedding, each 280 mm Art. 971012

4 Tracks, straight, in ballast bedding, each 280 mm Art. 971802 4 Tracks, straight, in ballast bedding, each 72.5 mm Art. 971803 4 Tracks, straight, in ballast bedding, each 70 mm Art. 971804 4 Tracks, straight, in ballast bedding, each 99 mmArt. 971805 4 Tracks, straight, in ballast bedding, each 158.8 mm Art. 971806 4 Tracks, curved, in ballast bedding, 45°, r 280 mm Art. 971851 10 Tracks, straight, in ballast bedding, each 280 mm Art. 971092

With wooden sleepers. Track code 80, bedding height up to top edge rail 6 mm, basic grid 70 mm, parallel spacing from centre to centre 37 mm.

With concrete sleepers. Track code 80, Bedding height up to top edge rail 6 mm, basic grid 70 mm, parallel spacing from centre to centre 37 mm. 2 Tracks, straight, with broad ballast bedding, each 280 mm Art. 971732 2 Tracks, straight, with broad ballast bedding, each 140 mm Art. 971739 4 Tracks, straight, with broad ballast bedding, each 140 mm Art. 971769 Tracks, straight, with broad ballast bedding, 8 p. Art. 977387 4 Tracks, straight, with broad ballast bedding, each 70 mm Art. 977639 4 Tracks, straight, with broad ballast bedding, each 72.5 mm Art. 977646

4 straight tracks, 99 mm Art. 970159 4 straight tracks, 158.5 mm Art. 970166

Length 2 x 33 and 2 x 18 mm. With wooden sleepers. Track code 80, bedding height up to top edge rail 6 mm, basic grid 70 mm, parallel spacing from centre to centre 37 mm. 4 Tracks, straight, in ballast bedding Art. 971099

Wooden sleepers Art. 971529

Transition track to other manufacturers: Sets with 4 transition pieces, each 35 mm long. Including 9 metal and 4 plastic links as well as a mounting tool. Transition to/from Kato, Roco, Fleischmann and Minitrix.

Transition track from/to Roco, Fleischmann, Kato, Minitrix…. Set with 4 straights of 35 mm. With 9 metal links, 4 plastic links and a mounting tool. Transition track, 35 mm, 4 pieces

Concrete sleepersArt. 971530

TRA

CK

SYS

TEM

TRA

CK

SYS

TEM

2726

With wooden sleepers. Track code 80, bedding height up to top edge rail 6 mm, basic grid 70 mm, parallel spacing from centre to centre 37 mm. 2 Tracks, curved, in ballast bedding, 45°, r 354 mm Art. 971126 4 Tracks, curved, in ballast bedding, 45°, r 317 mmArt. 971852 4 Tracks, curved, in ballast bedding, 15°, r 541 mm Art. 971853

With concrete sleepers. Track code 80, bedding height up to top edge rail 6 mm, basic grid 70 mm, parallel spacing from centre to centre 37 mm. 2 Tracks, straight, with broad ballast bedding, each 140 mm Art. 971739 2 Tracks, curved, with broad ballast bedding, 15°, r 541 mmArt. 971740 2 Tracks, curved, with broad ballast bedding, 22.5°, r 354 mm Art. 971753 4 Tracks, curved, with broad ballast bedding, 45°, r 345 mm Art. 971773 4 Tracks, curved, with broad ballast bedding, 45°, r 280 mm Art. 971781 4 Tracks, curved, with broad ballast bedding, 45°, r 354 mm Art. 971782 4 Tracks, curved, with broad ballast bedding, 22.5°, r 345 mm Art. 971783

Two bends with each 30° and 60°. With wooden sleepers. 4 Tracks, curved, Mini Curved,in ballast bedding, r 103 mm Art. 971111 4 Tracks, curved, Mini Curved, in ballast bedding, r 140 mm Art. 971112 4 Tracks, curved, Mini Curved, in ballast bedding, r 177 mm Art. 971113

With wooden sleepers. Track code 80, bedding height up to top edge rail 6 mm, basic grid 70 mm, parallel spacing from centre to centre 37 mm. 2 Tracks, curved, in ballast bedding, 15°, r 541 mm Art. 971123 2 Tracks, curved, in ballast bedding, 15°, r 317 mmArt. 971127 2 Tracks, curved, in ballast bedding, 15°, r 243 mm Art. 971143

With wooden sleepers. Track code 80, bedding height up to top edge rail 6 mm, basic grid 70 mm, parallel spacing from centre to centre 37 mm. 4 Tracks, curved, in ballast bedding, 15°, r 280 mm Art. 971854 4 Tracks, curved, in ballast bedding, 45°, r 243 mm Art. 971855 4 Tracks, curved, in ballast bedding, 45°, r 354 mm Art. 971856 4 Tracks, curved, in ballast bedding, 45°, r 391 mm Art. 971858

4 Tracks, curved, with broad ballast bedding, 45°, r 280 mm Art. 977714 4 Tracks, curved, with broad ballast bedding, 45°, r 317 mm Art. 977721 4 Tracks, curved, with broad ballast bedding, 45°, r 391 mmArt. 977746 4 Tracks, curved, with broad ballast bedding, 22.5°, r 280 mm Art. 977813 4 Tracks, curved, with broad ballast bedding, 22.5°, r 317 mm Art. 977820 4 Tracks, curved, with broad ballast bedding, 22.5°, r 391 mm Art. 977844

With concrete sleepers. Track code 80, bedding height up to top edge rail 6 mm, basic grid 70 mm, parallel spacinÅ g from centre to centre 37 mm. 4 Tracks, curved, in ballast bedding, 15°, r 279 mm Art. 971863

With concrete sleepers. Track code 80, bedding height up to top edge rail 6 mm, basic grid 70 mm, parallel spacing from centre to centre 37 mm. 4 Tracks, curved, in ballast bedding, 15°, r 280 mm Art. 971941 4 Tracks curved, in ballast bedding, 45 Ø, r 317 mm Art. 971192 4 Tracks, curved, in ballast bedding, 15 Ø, r 317 mm Art. 971197

TRA

CK

SYS

TEM

TRA

CK

SYS

TEM

2928

140 mm length, turnout angle 15°, turnout radius 541 mm. Manual operation. Manual points, outgoing track, rightArt. 971215 Manual points, outgoing track, left Art. 971216

Three-way points, left/right Art. 971262 Length 140 mm, turnout angle 15°.

Variable track, 70 –90 mmArt. 975253 Telescopic, possible length between 70 and 90 mm.

Variable track, 70 –90 mm, in broad ballast bedding, 2 piecesArt. 975284 Telescopic, possible length between 70 and 90 mm.

Spare attachments for cleaning trackArt. 976413 2 spare attachments for TOMYTEC cleaning tracks.

Wheel cleaning trackArt. 976415 With concrete sleepers. 70 mm long.

Electric points, right Art. 971231 Super-Mini electric points right, 70 mm long, turnout angle 30°, turnout radius 140 mm, with drive.

Electric points, left Art. 971232 Super-Mini electric points left, 70 mm long, turnout angle 30°, turnout radius 140 mm, with drive.

Electric Y-junctionArt. 971240 Length 70 mm, turnout angle 15°, turnout radius 280 mm. Including drive.

With wooden sleepers, Mini-Curved, with a curved piece of track, connection cable and small parts. Electric points, right, in ballast beddingArt. 972313 Electric points, left, in ballast beddingArt. 972320

Double crossover, in ballast beddingArt. 972474 Double crossover, with wooden sleepers.

With wooden sleepers. Electric points, right, in ballast beddingArt. 972450 Electric points, left, in ballast beddingArt. 972467

Three-way points, right/leftArt. 971261 Length 140 mm, turnout angle 15°, turnout radius 541 mm / 280 mm. With drive, 12 V DC.

Length 140 mm, turnout angle Ø 15, turnout radius 541 mm. Electric points, right Art. 971271 Electric points, left Art. 971272

Length 140 mm, turnout angle 30°, turnout radius 280 mm. Electric points, right Art. 971273 Electric points, left Art. 971274

Outer radius 317 mm, bend 45°, turnout radius 280 mm, with drive. Electric bend points, right Art. 971278 Electric bend points, left Art. 971279

Buffer stop with LED lamppost and silencer Art. 971423 With track.

Buffer stop with broad ballast bedding, 1 piece Art. 971424 With 40 mm track end piece, with wooden sleepers, 37 mm wide.

Buffer stop with broad ballast bedding, 2 pieces Art. 971425 With 40 mm track end piece, with wooden sleepers, 37 mm wide.

Buffer stop, 99 mmArt. 971421 With wooden sleepers.

Turntable with control unitArt. 971633 Ready-made model. Operates on 12 V DC. Overall dimension 212 mm, platform length 166 mm.

Buffer stop Art. 971427 With piece of track, concrete sleepers, 70 mm long, buffer stop illuminated by LED.

Points switch box, singleArt. 975531 For points and semaphores. With one port.

Points switch box, double Art. 975532 For points and semaphores. With two ports.

GLE

IS-S

YSTE

M

GLE

IS-S

YSTE

MTR

AC

K S

YSTE

M

TRA

CK

SYS

TEM

STARTSETS – NICHT LÖSCHENINHALT FÜR QUERVERWEIS!

3130

Track set, oval Art. 971080 Track set for an oval, 206 x 346 mm. With 2 straights 140 mm and 6 curves: radius 103 mm/angle 60° as well as connection cable.

Track set, oval Art. 971081 Track set for an oval, 317 x 457 mm. With 2 straights 140 mm, 4 curves: radius 140 mm/angle 60° and 4 curves: radius 177 mm/angle 30° as well as connection cable.

Tracks start set for an oval Art. 970946 Start set for an oval 814 x 2158 mm, including speed controller, mains power pack, points, platform, flyover, up and down ramps and bridge.

Track set, descending ramp Art. 971082 Track set for a turnout, 37 x 490 mm. With one straight 140 mm and one straight 280 mm, 2 straights 70 mm, 2 curves: radius 140 mm/angle 30° and 2 points.

Tracks start set for an oval Art. 970947 Track set for an oval, 560 x 1120 mm. With 3 straights 280 mm, 1 straight 140 mm, 1 rerailing track 140 mm, 8 curves: radius 280 mm/angle 45°, as well as speed controller, mains power pack and connection cable.

Track set, oval Art. 971083 Track set for an intersection, 273 x 440 mm. With one curve each with radius 140 mm/angle 30°, radius 140 mm/angle 60°, radius 177 mm/angle 60°, radius 177 mm/angle 30°, 2 straights 70 mm, 3 straights 33 mm, 4 straights 18.5 mm and an intersection.

Track start set, oval, with bridgeArt. 970275 Start set tracks for an oval 613 x 1422 mm, with bridge, tracks in viaduct bedding.

Track start set, oval, with rerailing trackArt. 970282 Track set for oval 634 x 1614 mm. With 5 straights 280 mm, 1 straight 140 mm, rerailing track 140 mm, 6 curves: radius 317 mm/angle 45° and 4 curves: radius 541 mm/angle 15° as well as track connection cable.

Start set Tracks D Art. 970640 Track set for an oval, 634 x 1614 mm. With 2 straights 140 mm, 3 straights 280 mm, 8 curves: radius 317 mm/angle 45°, 4 curves: radius 541 mm/angle 15°, 1 double crossover, points box, connection cable.

Start set Tracks Y Art. 970695 Track set for an oval, 55.5 x 1120 mm. With 4 straights 99 mm, 6 straights 72.5 mm, 2 straights 280 mm, 4 curves: radius 541 mm/angle 15°, 2 points, points box and connection cable.

Start set Tracks B Art. 970923 Contains 1 straight 140 mm, 4 straights 280 mm, 2 straights 72.5 mm, 2 curves, 2 points, 2 control boxes for the points. Floor space required 55.5 x 1120 mm.

Tracks start set for an oval Art. 970945 Start set for an oval 560 x 1120 mm, including speed controller, mains power pack, points and link.

START SETS – THE QUICK WAY! Start Sets – the quick way! Track layouts are perfect to combine with one another.

GLE

IS-S

YSTE

M

GLE

IS-S

YSTE

M

TRA

CK

SYS

TEM

TRA

CK

SYS

TEM

3332

EXAMPLES OF CONSUMPTION

Art. regular consumption when usingRailcar max. 300 mA per vehicleHeadlights 60 mA per set Rear lights 60 mA per setInside lighting max. 60 mA per setInside lighting – LED 25 mA per setBuffer stop, LED 20 mA per buffer stopElectric points/Traffic lights 150 mA independent of numberElectric signal light max. 2 mA per signalTCS Signal* 10 mA per signalTCS Control unit* 45 mA – 85 mA per unitTCS Turntable* 140 mA per pieceTrack cleaning vehicle max. 300 mA per vehicleRed cleaning track max. 300 mA per track

*What means TCS?The junction connector is used to wire and connect several products one after the other, such as signals, for instance. Such system is called Terminal Connection System TCS.

SPEED CONTROLLERSHow to compute current consumption properly.

TOMYTEC’s speed controllers are a must for realistic playing. They are available in various versions. Power can be supplied through the European electric network without any difficulty, however a plug adapter is required.

*These mains power packs are fitted with a 2-position control system suitable for electric points.

#What means CL?CL means Constant Lightning system. Transformers with the abbreviation CL ensure permanently constant light within trains, irrespective of their speed, they may even be at rest.

These are theoretical values: they may differ depending on the indicating devices used!

EXAMPLES OF COMPUTATION

Art. no. Art. name PowerFor Sets . . . . . . . . . . . . . . . Mains power pack N-400* . . . . . . . . . . . . . . . . . 0.4 A (400 mA)975507 . . . . . . . . . . . . . . . . . TCS Mains power pack N-600 . . . . . . . . . . . . . 1.2 A (1000 mA)975068 . . . . . . . . . . . . . . . . TCS Mains power pack N-1001-CL# . . . . . . . . 1.2 A (1200 mA)

Example of calculation of current consumption when operating one railcar with three carriages:

Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 mARear lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 mARailcar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 mAInside lighting set for 3 carriages . . . . . . . . . . 180 mATotal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 mA

Example of calculation of current consumption when operating one railcar with 13 carriages:

Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 mARear lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 mARailcar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 mAInside lighting set for 13 carriages . . . . . . . . . 780 mATotal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 mA

Example of calculation of current consumption when operating two railcars with six carriages:

Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 mARear lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 mA2 Railcars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 mAInside lighting set for 6 carriages . . . . . . . . . . 360 mATotal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1080 mA

THEORETICAL COMPUTATION OF CURRENT CONSUMPTIONUsing the chart on the preceding page you are in a position to calculate the current consumption induced by Tomix products. However, please note that these are only theoretical values! The actual values may differ due to soiling, wear and tear, and the different basic functions performed by the trains!

In the first example given you can use all speed controllers listed on page 32, in examples 2 and 3 you cannot use mains power pack N400 and N600 because they deliver too little power. The number of carriages in a train that can be operated together within the nominal power rating of speed controllers N-1001-CL is up to 8 waggons.

We recommend to use another power supply for products that only require current when trains are operating. In such a case connect the speed controller to the racks, and the other consuming devices such as illumination of the installation or any points to a separate power supply.

Please note that several mains power packs may not be connected to the same track circuit!

TEC

HN

OLO

GY

TEC

HN

OLO

GY

3534

Connection of tracks:Connection of tracks to the speed controller and thus to the power supply is most simple. Nearly every track features a point of contact. The connection cable is plugged here, the other end is connected to the speed controller, and there it goes!

Points control box:It’s just as easy to connect points to control boxes. Points, too, feature points of contact where one end of the connection cable is plugged; the other end is connected to the control box. Control boxes in their turn can be connected on one side of speed controllers. The switch box then allows to change the position of the points connected to it, by means of switches.

#What means CL?CL means Constant Lightning system. Transformers with the abbreviation CL ensure permanently constant light within trains, irrespective of their speed, they may even be at rest.

Speed controller, N600 Art. 975507 Speed controller for railway and tram. 153 x 89 x 71 mm, 12 V DC/1.0 A. Controls speed and direction. Connection possible on one side for the points box.

Speed controller, N-1001 CL# Art. 975068 Speed controller for railway and tram. 153 x 89 x 71 mm, 12 V DC/1.0 A. Controls speed and direction. With CL function ensuring constant intensity of light. Connection possible on one side for the points box.

TRANSFORMERS AND CONTROL SYSTEMSimple and, most important, safe!

Reversed polarity cable for Tomix pointsArt. 975817 150 cm long.

Control unit for automatic operation Art. 975563 Control unit allowing automatic operation. With various programs ensuring the control of trains, points and so on. Also allows to alternate with manual operation. DC for 0.5 A, 0 to 12 V.

TRAN

SFO

RMER

S AN

D C

ON

TRO

L SY

STEM

TRA

NSF

OR

MER

S A

ND

CO

NTR

OL

SYST

EM

3736

Fishing boat IIArt. 971487 Ready-made model, painted. Can be used as full hull or on a waterline.

8 BicyclesArt. 973582 Ready-made models.

Dumper & concrete mixer, black/whiteArt. 972945 Ready-made model of two lorries, including road parts made of cardboard.

Truck set, 2 trucksArt. 974437 2 Japanese lorries as milk tank trucks. Ready-made model.

Forklift, 2 pieces, yellowArt. 973517 Ready-made models.

Lorry set CArt. 974888 Lorry set, ready-made models, 1 x Hino Ranger tip lorry in yellow, 1 x Hiro Ranger with crane in blue.

Fire engine Set BArt. 974284 Fire engine set B, 1 x Hino Rising pump vehicle, 1 x Hino Ranger pump vehicle.

Truck set, 2 gas tank trucksArt. 972956 Ready-made models.

Lorry set AArt. 974864 Lorry set, ready-made models. 1 x HINO HE with enclosed trailer in yellow, 1 x HINO HH with open trailer in blue.

Lorry set DArt. 974895 Lorry set, ready-made models, 1 x Hino Ranger tip lorry in turquoise, 1 x Hiro Ranger with crane in light blue.

Dumper & concrete mixer, red/yellowArt. 972938 Ready-made model of two lorries, including road parts made of cardboard.

Vehicles, Tank lorriesArt. 974376 Ready-made models.

Modern forklifts, 2 pieces, yellow-orangeArt. 973508 Ready-made models.

Lorry set BArt. 974871 Lorry set, ready-made models. 1 x Mitsubishi FUSO with enclosed trailer in yellow, 1 x Mitsubishi FUSO with open trailer in blue.

8 BicyclesArt. 973581 Ready-made models.

Forklift, 2 pieces, orangeArt. 973518 Ready-made models.

Vehicles, Tank lorries, ShellArt. 975848 Ready-made model.

VEHICLESVehicles for model railway installation.

FAH

RZE

UG

EV

EHIC

LES

VEH

ICLE

S

3938

Vehicles, Set with 4 vehiclesArt. 975659 Vehicles, set with 4 vehicles of make Subaru, Daihatsu and Toyota of the 1950s.

Truck set, 4 different vansArt. 975803 Ready-made models.

Fire engine set AArt. 978427 Fire engine set A, 1 x Isuzu TX pump vehicle, 1 x Hino TC turntable ladder.

Bicycles and mopedsArt. 975952 6 different vehicles with riders.

Vehicles, 2 lorriesArt. 975694 Ready-made models of Japanese lorries.

Vehicles, 2 lorriesArt. 975695 Ready-made models of Japanese lorries.

Vehicles, 4 Toyotas as taxisArt. 975551 Vehicles, 4 Toyotas as taxis.

Truck set, 4 different light lorriesArt. 972935 4 different light lorries of make Nissan, Mazda, Honda and Subaru.

Modern signal towerArt. 974024 Ready-made model.

Pedestrian bridgeArt. 976065 Ready-made model of a pedestrian bridge.

KITSMost varied building models in various designs!

TOMYTEC’s building models are supplied painted and easy to assemble. Commercial houses and railway buildings, bridges and accessories – they were designed for the most part after Japanese originals, but can readily be used on European installations, too.

2 Underground entrancesArt. 974317 Underground entrances, 1 x narrow, 1 x broad.

Steel bridge, 140 mm, blueArt. 973029 With built-in track, clearance height maximum 55 mm.

Modern chimneyArt. 975748 Triple, plug-in kit, 6 x 6 x 30 cm.

Cellular radio mastArt. 976713 Plastic model kit, easy to build, painted.

FAH

RZE

UG

EV

EHIC

LES

KITS

4140

Shipyard buildingArt. 972941 With ramp and small parts, plug-in kit, 18 x 13 x 8 cm.

United Oil, GasholderArt. 974485 Plug-in kit, diameter 10 cm, height 12 cm.

Overhead line mastsArt. 973078 24 pieces, for two-track sections.

Freight hallArt. 974452 2 pieces, with small parts, 6 x 10 x 5 cm.

Diesel tugArt. 976087 Ready-made model of a tug, matching fishing boat is Art. 976063.

Bank buildingArt. 975746 Plug-in kit, 8 x 7 x 6 cm.

Cable railwayArt. 975325 With motor, battery-operated.

Building set, Office building and barArt. 975809 Plug-in kits.

Lattice bridge, two-laneArt. 973053 Ready-made model. 280 mm length, clearance height maximum 55 mm.

Pedestrian bridgeArt. 972387 Pedestrian bridge, 2 pieces.

Sand houseArt. 975338 Small sand house with two huts.

St. James churchArt. 975798 Plug-in kit, 6 x 10.5 x 8.5 cm.

Water tower and coaling stationArt. 973044 Including ground plate and decoration parts.

Relay stationArt. 974023 14 x 7 x 4.20 cm.

Bicycle standArt. 973292 Including three figures and bicycles.

Storage tanksArt. 975751 Set with three pieces, plug-in kit.

Gas tankArt. 975750 2 pieces, plug-in kit.

KIT

S

KIT

SK

ITS

4342

ROLLING STOCKShinkansen and bogies

Japan is the country of high-speed trains – the Shinkansen that dash on the Japanese well-developped rail-line network with up to 320 kilometres per hour. Despite such high speeds the Shinkansen are considered to be the safest trains worldwide! In scale modelling, too, the Shinkansen make their appearance and are easily identifiable thanks to their highly individual shape. Besides basic sets there are extension sets and special editions, too.

Shinkansen, type 100Art. 972286 Shinkansen, type 100, basic set. Including drive.

Shinkansen, type N700 -880 Sanyo/Kyushu Art. 972411 Basic set with 3 carriages. Including drive.

Shikansen 500 type EVA, Special edition Art. 978959 Japanese high-speed train. Special edition with prints of the Japanese, internationally successful animation television serial Neon Genesis Evangelion.

Chassis TM20, motorizedArt. 975971 With flywheel mass, drive on all four axles, standard N coupling. 15M Class C.

Chassis, motorized, TM- 06RArt. 977132 With flywheel mass, drive on all four axles, standard N coupling. Length 116 mm, pivot pitch 80 mm, axle base 14 mm, width 15 mm.

Chassis TM14, motorizedArt. 975964 With flywheel mass, drive on all four axles, standard N coupling. 20M Class A2.

Chassis, motorizedArt. 973163 With flywheel mass, drive on all four axles, standard N coupling. Length 120 mm, pivot pitch 90 mm, axle base 16 mm.

Motorized chassisArt. 975666 66 mm long, 16 mm axle base, 15 mm wide.

Chassis, motorized, 100 mm, TM- 05RArt. 977131 With flywheel mass, drive on all four axles, standard N coupling. Length 100 mm, pivot pitch 74 mm, axle base 14 mm, width 15 mm.

Chassis TM15, motorizedArt. 975965 With flywheel mass, drive on all four axles, standard N coupling. 20M Class B2.

Chassis, motorized, 119 mm, TM- 08RArt. 977134 With flywheel mass, drive on all four axles, standard N coupling. Length 119 mm, pivot pitch 90 mm, axle base 14 mm, width 15 mm.

Chassis TM-12R, motorizedArt. 975962 With flywheel mass, drive on all four axles, standard N coupling. 19M Class A.

RO

LLIN

G S

TOC

K

ROLL

ING

STO

CK

www.faller.de www.car-system-digital.de www.facebook.com/faller.de www.faller.de/de/googleplus

Marketing in Europe:

Gebr. FALLER GmbHKreuzstraße 978148 GütenbachDeutschland

Telefon +49 (0)7723 651-0 [email protected]

Subj

ect t

o er

rors

, pric

e ch

ange

s, a

vaila

bilit

y an

d m

odifi

catio

ns o

f tec

hnic

al d

etai

ls, d

imen

sion

s an

d/or

col

ours

with

out n

otic

e. D

imen

sion

s an

d ill

ustr

atio

ns a

re n

ot b

indi

ng.

VISIT WWW.FALLER.DE AND MEET TOMYTEC’S DIVERSITY! For a complete synopsis of TOMYTEC and TOMIX collections currently available in Europe, visit www.faller.de. Product portfolio is continuously expanded and available throughout Europe in your FALLER retailer’s shop! Discover many more models for the N gauge, supplied with detailed assembly instructions, on the topics: cleaning vehicle, tracks, Shinkansen, bus and tram systems, speed controllers, and many others more.

GREAT DIVERSITY – INCREDIBLE QUALITY!Besides high-quality model kits TOMYTEC offers much more.Further information on the company at www.tomytec.co.jp

4 1 0 4 0 9 0 7 9 0 1 8 9

Documents

BUS SYSTEM, TRAM SYSTEM, TRACK SYSTEM AND TRACK … · the bus system – which thus allows to design city scenes with tram and bus traffic. The structure of vehicles is similar to