The network interface device (NID) is a kind of equipment which works as the concept of Ethernet service demarca- tion defined by MEF (Metro Ethernet Forum). The carrier operators or service providers can deploy NID to enterprise subscribers then provide the point-to-point E-Line or multipoint-to-multipoint E-LAN service which is logically Ether- net virtual connection to replace the legacy TDM based lease line service. The CTC NID series solution such as FRM220-MSW404 or MSW-404S conforms to the CE2.0 standards to enable the rapid business service activation with IEEE 802.1ad QinQ VLAN stacking, multiple CoS as well as granular rate limiting and reduce the operation cost by leveraging advanced fault management features as IEEE 802.1ag OAM standard for proactive network fault monitoring and rapidly isolation. Supporting ITU-T Y.1731 to perform the SLA monitoring and on-demand measure the packet loss, delay, latency and availability of service. Built-in RFC2544 features allow the device to measure the network throughput performance without the need of service personnel on site. Application • The speciﬁcation and pictures are subject to change without notice. www.ctcu.com CTC UNION TECHNOLOGIES CO., LTD. 8F, No.60, Zhouzi St. Neihu, Taipei 114, Taiwan TEL : +886 2 2659-1021 FAX : +886 2 2659-0237 [email protected] R Printed 09/2017 V3.0 Copyright 2014 CTC UNION TECHNOLOGIES CO., LTD. CTC UNION and the CTC UNION logo are trademarks of CTC UNION TECHNOLOGIES CO., LTD. All rights reserved. All other trademarks are the property of their respective owners. Specifications & design are subject to change without prior notice. Please visit CTC UNION website for more details. Business Connection Service Point-to-Point E-Line Service Carrier Ethernet Network MSW-404S Site A Site B FRM220-MSW404 Carrier Ethernet Network Site B Site A Site C Multi-Point E-Line Service MSW-404S FRM220-MSW404 FRM220-MSW404 L2+ OAM Ethernet Switch (EDD) FRM220-MSW404 L2+ Carrier Ethernet Switch (NID) with SyncE MSW-404S Products METRO ETHERNET FORUM MEMBER

Business Connection Service-002-20170928

Download PDF Report

Upload
others
View
2
Download
0

Embed Size (px)

Citation preview

Page 1: Business Connection Service-002-20170928

The CTC NID series solution such as FRM220-MSW404 or MSW-404S conforms to the CE2.0 standards to enable the rapid business service activation with IEEE 802.1ad QinQ VLAN stacking, multiple CoS as well as granular rate limiting and reduce the operation cost by leveraging advanced fault management features as IEEE 802.1ag OAM standard for proactive network fault monitoring and rapidly isolation. Supporting ITU-T Y.1731 to perform the SLA monitoring and on-demand measure the packet loss, delay, latency and availability of service. Built-in RFC2544 features allow the device to measure the network throughput performance without the need of service personnel on site.

Application

• The speci�cation and pictures are subject to change without notice.

www.ctcu.comCTC UNION TECHNOLOGIES CO., LTD.8F, No.60, Zhouzi St. Neihu, Taipei 114, Taiwan TEL : +886 2 2659-1021 FAX : +886 2 2659-0237 [email protected]

Printed 09/2017 V3.0

Copyright 2014 CTC UNION TECHNOLOGIES CO., LTD.CTC UNION and the CTC UNION logo are trademarks of CTC UNION TECHNOLOGIES CO., LTD. All rights reserved. All other trademarks are the property of their respective owners.Specifications & design are subject to change without prior notice. Please visit CTC UNION website for more details.

Business Connection Service

Point-to-Point E-Line Service

Carrier Ethernet Network

MSW-404S

Site A Site B

FRM220-MSW404

Carrier Ethernet Network

Site B

Site A Site C

Multi-Point E-Line Service

MSW-404S

FRM220-MSW404 FRM220-MSW404