Butterfly Valves and Accessories Overview · PDF file · 2016-12-12Tyco Flow Control brings together several of the world’s premier brands of butterfly valves and controls developed

Butterfly Valves and AccessoriesOverview

Flow Control

1TVCMC-0400-US-0710

Ideally suited for many high performance applications, including vacuum, sanitary,corrosive, and erosive that are found within the chemical, mining, pulp and paper, oiland gas, food and beverage, marine, and power markets.

• Cartridge style seat provides high pressure, as well as full vacuum capability.

• Disc is available in a variety of metals and elastomer coated.

• Blowout-proof stem retention design is standard.

• Lug style is uni-directional, dead-end service (2" thru 24").

Size Range: 2" thru 24" (wafer and lug style)

Pressure Rating: 2" thru 12" – 250 psi14" thru 24" – 200 psi

Flange Standard: ASME 125/150

Request Data Sheet: KEYMC-0026-US

Butterfly Products Overview

Used when sanitary service, corrosion or erosion resistance is required in isolation orcontrol valve applications. These high performance applications are found in food andbeverage, pharmaceutical, pulp and paper, mining and power industries.

• One-piece, thin profile, disc-stem provides minimum obstruction to flow resulting inhighest Cv, lowest pressure drops and best control characteristics.

• One-piece disc-stem is available in 316 stainless steel, polymer or elastomer molding.

• Triple-function seat provides bi-directional drop-tight shutoff, isolates the valve bodyand stem from the line media and also serves as the flange seal.

• Dovetail seat retention allows convenient and economical seat replacement.

Size Range: Figure 990 (wafer style) 1" thru 20"Figure 920 (lug style) 2" thru 20"

Pressure Rating: 1" thru 12" Metal Disc-Stem – 150 psi2" thru 12" Molded Disc-Stem – 100 psi14" thru 20" Metal or Molded Disc-Stem – 75 psi



Keystone Figure 990/920/999/992

Keystone Series 60

Tyco Flow Control brings together several of the world’s premier brands of butterfly valves and controls developed for the processindustries. By combining the knowledge and resources of diverse brands, each with a long history, Tyco Flow Control now offers a level of expertise that is second to none in providing flow control solutions to a variety of industries including HVAC, oil and gas,chemical and petrochemical, food and beverage, pulp and paper, and power generation.

Tyco Flow Control’s extensive know-how is available to our customers through a global network of Sales Centers. These SalesCenters are able to process sales requests quickly and efficiently, and provide customers with a local source for distribution and service.

Keeping close contact with the market has assisted us in the development of new products, and allowed us to become your single source for Total Flow Control Solutions™.

Ideally suited for many general valve applications such as liquid and gas transmissionfor isolation and control in cooling systems, water treatment, chemical, mining, foodand beverage as well as bulk handling.

• One-piece body with extended neck allows clearance for flanges and insulation.

• Triple-function-seat provides bi-directional drop-tight shutoff, isolates the valve body and stem from the line media and also serves as the flange seal.


• 32 AARH polished disc edge provides extended cycle life.

Size Range: Figure AR1 (wafer style) 2" thru 36"Figure AR2 (lug style) 2" thru 24"




This product is designed to meet the demands of applications and markets that require highpressure and bi-directional dead-end service.

• Injection molded seat provides bubble-tight shutoff to 250 psi.

• Lug style is full rated 250 psi dead-end service.

• Round polished disc edge provides concentric sealing, reduced torque and longer seat life.

Size Range: 2" thru 12"

Pressure Rating: 250 psi



2 TVCMC-0400-US-0710

These valves are ideally suited for any service where tight shutoff with maximum flowarea is required.

• Field-replaceable seat fully isolates the body and stem from flow.

• Thin disc design provides minimum obstruction of the flow, resulting in smooth flow characteristics.

• Ductile Iron (ASTM A536) body is standard.

• Available in nylon coated Ductile Iron and Super Duplex discs.

Size Range: 2" thru 24" (wafer and lug style)



Request Data Sheet: KEYMC-0260-US (2" thru 12")KEYMC-0277-US (14" thru 24")

Keystone Figure AR1/AR2

Keystone Series 61

Keystone Figure 221/222

Dubex - RMI AWWA Butterfly Valve• Triple eccentric design.

• Virtually no rubbing from the resilient seal on the seating surface. Thisenhances the life expectancy of the valve.

• Torque closing: greater torque results in improved tightness.

• Resilient seal firmly integrated in disc for tight shutoff performance.

• In-line replaceable and readjustable resilient disc seal.

• Face-to-face:- According AWWA C504-06 short.- Above 72": manufacturer standard.- Alternative face-to-face dimensions on request.

• Performance testing in compliance with AWWA C504 requirements.

• Vibration-proof disc pins installed perpendicular on the flow direction.

• Axial bottom shaft bearing carrying the disc weight when installed with shaft invertical position and ensuring accurate centering of the disc assembly.


Pressure Rating: 6" up to 48" – 350 psiup to 86" – 250 psiup to 120" – 150 psiabove 120" – contact factory

Drilling: 6" thru 72" – ASME B16.1above 72" – AWWA C207, class D

Request Data Sheet: RMISB-0018-US

3TVCMC-0400-US-0710

This valve is used in many applications where large diameter valves are used,such as water transmission, chemical, mining, pulp and paper, pharmaceuticaland power. The body design is a double flange.

• The disc is available in a variety of metals including elastomer molded.

• Triple-function seat provides bi-directional drop-tight shutoff, isolates the valvebody and stem from the line media and also serves as the flange seal.


Size Range: 24" thru 48" (double flange)




Keystone Figure 106

Keystone Dubex - RMI

120" Valve

4 TVCMC-0400-US-0710

• Integrally cast mounting pad provides direct mounting of many actuators.

• Rocker-shaped gland bridge compensates for uneven adjustment of gland nuts.

• Disc taper pins are tangentially positioned half in disc and half in stem, placingthem in compression rather than shear, which eliminates potential for failure.

• Optional bi-directional end-of-line service available.

• Standard materials of construction include carbon steel and 316 stainless steel. Other alloys available as options.

• This K-LOK design is available for firesafe services and is API 607 4th Editionapproved by third-party witness.


Pressure Rating: 285 psi and 740 psi

Temperature Rating: -20°F to 1000°F

Flange Standard: ASME 150 and 300


• Heavy duty circular key holds the seat and retaining ring in place, providingbi-directional, end-of-line service at full-rated pressure.

• Uninterrupted gasket surfaces eliminate problems associated with seat retainingscrews in the gasket surface and allows use of standard spiral wound gaskets.

• Unique interference seat design with energized elastomer O-ring allowsbi-directional Class VI shutoff at lower pressures. The seat is further energized byline pressure, providing the same tight bi-directional shutoff at full-rated pressure.

• The seat retainer ring is housed within the flange gasket ID to eliminate potentialemission path.



Temperature Rating: -20°F to 350°F

Flange Standard: ASME 150


The K-LOK is an ASME Class product, providing services in ASME 150 and 300 ratings. The K-LOK valve has a double offsetdisc that seals against a torque energized seat. The K-LOK can provide tight shutoff from vacuum to the ASME pressure ratingwithout any modifications. The two-piece stem is available with soft seat, metal seat or API 607 4th edition certified firesafe.

Keystone Figure 360/362 and Figure 370/372

Keystone Figure 310/312

High Performance

5TVCMC-0400-US-0710

• Torque-generated resilient metal seal ring provides zero leakage performance.

• Torque-seating action ensures continuous bi-directional, zero leakage performance.

• Quarter-turn, non-rubbing design achieved by a unique, triple offset geometryeliminates all seat-to-seal rubbing throughout the valve’s 90 degree rotation.

• All metal construction and inherently fire safe, certified per API 607 4th Edition.

• Single-piece cast body, and Stellite hardfaced integral seat permits broaderapplications, longer valve life and less maintenance.

• Standard long length hardened stainless bearings with bearing protectors providethe highest level of protection in dirty or polymeric applications.

• Standard externally retained, blowout-proof shaft is safer to operate and providescomplete compliance to API 609.

• Standard integral position indicator on the shaft and top mounting flange ensurepositive disc position identification.

• Double-flanged model QTF adheres to the face-to-face dimensional requirements of ISO 5752.

• Double-flanged model QTG adheres to the face-to-face dimensional requirementsof ASME B16.10.

• Single-flanged lug model QTL and wafer model QTW both adhere to the face-to-face dimensional requirements of API 609.

• Standard carbon steel and stainless steel bills of material and many alloy bills of material are available upon request.


Pressure Rating: ASME Class 150, 300, 600 and 900

Flange Standard: ASME B16.5, ASME B16.47 Series A & B

Industries Served: Refining, Chemical, Petrochemical, Pulp and Paper,Pharmaceutical, Power, Marine, Steam Distribution, Specialty Chemical, Sugar Processing, and Municipal Water

Request Data Sheet: VANLT-0005-US

QTF Double Flange

QTL Lug Style

QTW Wafer Style

QTG Double Flange

Triple Offset, Metal Seated, Bi-Directional Zero Leakage for Critical Service

The undisputed leader in triple offset valve technology, Vanessa offers the ultimate performance in a huge range of materials, sizes, classes, temperatures and applications. The non-rubbing triple offset design in combination with the resilient metal seal ringensures proven zero leakage performance over the highest possible valve cycle life.

Vanessa Series 30,000 QTF, QTG, QTL and QTW

Rotary Process Valves

6 TVCMC-0400-US-0710

Direct Mount

• Compact rack and pinion design delivers maximum output torques in asmall compact package.

• Full bearing support on every moving part for long life.

• Unique spring design allows for easy adjustment in the field for differentsupply pressures.

• Available in Hard Anodized epoxy coated body for more corrosiveapplications.

• Direct mounts on Keystone butterfly valves.

Supply Pressure: 40 to 120 psi

Output Torque: Double Acting - to 27,624 in. lbs.Spring Return - to 10,155 in. lbs.


Pneumatic ActuatorsTyco Flow Control offers pneumatic actuators in double rack and pinion and Scotch yoke styles, available in hard anodizedaluminum, Nickel impregnation or stainless steel. The actuators can be used in a wide range of applications with actuator torquesbetween 87 and 256,000 lb. in.

• Compact rack and pinion design delivers maximum output torques in a smallcompact package.

• Full bearing support on every moving part for long life.

• Encapsulated springs simplify assembly and ensure safety and reliability.

• Hard Anodized epoxy coated body for higher level of corrosive resistance.

• Direct mounting to Keystone butterfly valves.

Supply Pressure: 40 to 120 psi

Output Torque: Double Acting - to 27,624 in. lbs.Spring Return - to 10,155 in. lbs.


Keystone 79U

Keystone MRP

Morin Scotch yoke actuators have continued to gain market share over the yearsdue to the corrosive resistance material used along with very high reliability. TheHP takes the same proven technology but adapts it for use with high-pressurehydraulics. Morin also offers a complete line of accessories such as lockouts,ESD packages, overrides, and mounting hardware.

• Canted yoke models for torque seated valves requirements

Hydraulic supply pressure: 1500 psig

Output Torques: up thru 240,000 lb.in.

Temperature Range: -22 thru 212°F

Request Data Sheet: MORMC-0072-US

7TVCMC-0400-US-0710

Pneumatic Actuators

The Morin actuators are constructed of ductile iron housing and end caps, 17-4stainless steel yoke, with either 316 stainless steel barrels for the Series B or steelbarrels with Xylan® coating for the Series C. The Morin Series S actuators areconstructed of stainless steel offering high levels of corrosion protection.

Morin offers both symmetrical and canted yoke designs to allow suiting the outputtorque profile to the valve for more efficient and economic operation.

• Scotch yoke design using precision bearings eliminates dead band in theyoke mechanism, providing the greatest torque output at the beginning andend of stroke.

• Teflon® piston bearings, bronze piston rod bushings and output shaftbushings of either bronze or Teflon® provide longer life, reduce maintenanceand require no lubrication.

• Choice of canted or symmetrical yoke design puts the torque where it's mostneeded.

• Bi-directional travel stops provide accurate valve rotation adjustment.

Series B and C

Supply Pressure: 40 to 160 psig

Output Torques: Double Acting – to 240,000 lb. in.Spring Return – to 145,775 lb. in.

Series S

Supply Pressure: 40 to 160 psig

Output Torques: Double Acting – to 240,000 lb. in.Spring Return – to 104,125 lb. in.

Request Data Sheet: Series B and C, MORMC-0023-USSeries S, MORMC-0024-USMorin Torque Book, MORMC-0333-US

Morin

Morin

The Morin actuator products utilize a Scotch yoke mechanism that provides highest torque outputs at each end of the actuatorstroke, resulting In a torque characteristic that is typical to most quarter-turn valves.

Series B and C

Series S

Hydraulic Actuators

Series HP

Teflon® is a registered trademark of E. I. du Pont de Nemours and Company.Xylan® is a registered trademark of Whitford Worldwide.

• ICON multi-turn electric actuators with non-intrusive calibration, interrogation oroperation via the local control interface, via the digital bus, handheld device withinfrared port or handheld device with Bluetooth® wireless technology.

• Standard local controls with three position selector switch, open-stop-close pushbuttons and three LED indicator lamps.

• Two back-lit LED displays, one for position indication, the other for text messages

• Self-diagnostics via an array of sensors. Simplifies field troubleshooting.

• Other standard features include a cycle timer, monitor relay, phaseprotection/correction, data logger and ESD relay.

• 40 digital I/O (inputs/outputs) for control, diagnostics, and status.

Output Torque:

Top-mount Multi-turn: Up to 12,744 in. lb. (1,062 ft. lb.)

Side-mount Multi-turn: Up to 408,000 in. lb. (34,000 ft. lb.)

Side-mount Quarter-turn: Up to 4.4 million in. lb. (366,667 ft. lb.)

Electric Fail Safe Quarter-turn: Up to 40,000 in. lb. spring end torque (3,333 ft. lb.)

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.and any use of such marks by Tyco Flow Control is under license.

8 TVCMC-0400-US-0710

Electric Actuators

The Keystone EPI2 series is the most innovative all-in-one actuator solution for the automationof quarter-turn valves and dampers. With a huge number of standard features included in a small, compact design, this new series of electric actuators greatly simplifies valve,actuator and control system integration. Available with both weatherproof and explosionproof environmental ratings allows for a wide range of applications in most plantenvironments. The unique epicyclical gear train eliminates the need for mechanical/electricalbrakes and handwheel clutch mechanisms. The EPI2 direct mounts to most Tyco valves,eliminating the need for expensive mounting brackets. The EPI2 can be tailored to fitcustomer requirements with the addition of options such as servo controls, feedbackmodules, network cards and local pushbutton station. This flexibility gives customers theability to meet many of their quarter-turn electric actuator needs with a single actuator line.

Torque Range: 600 to 17,700 lb. in.

Universal Voltage Supply: 24 to 240 Volt, AC or DC

Environmental Ratings: Standard Weatherproof: NEMA 4/4X/6 (IP66/68) + CSA 139 (CUS) Optional - UL 873

Hazardous Environments: FM/CSA Approved for NEC500(Class I, Div. 2) and NEC 505 (Class I, Zone 1 and 2) + NEMA 4/4X/6 (IP66/68)


Keystone EPI2

Tyco Flow Control offers a complete line of electric actuators in single and multi-phase voltages for on/off or modulating services.The electric actuators can be used on most network protocols that utilize the latest technology.

Biffi ICON

WGR

ELGA

ICON 2000

Keystone Position Monitors: K-Block and K-SwitchThe Keystone range of Position Monitoring equipment offers models for all serviceclassifications, each one incorporating numerous user-friendly features, includingHiVue® Local Visual Display, EasiFix® Switch Adjustment and ModMount®Assembly facilities.

Westlock Position Monitors: AccuTrakPosition Monitoring equipment suitable for all hazardous area classifications, eachone incorporating numerous user-friendly features, including the Beacon highvisibility position indicator, Touchset Limit Switch Adjustment and ModMount®bracket assemblies.

9

Controls

HiVue®, EasiFix®, and ModMount® are eithertrademarks or registered trademarks of TycoInternational Services AG or its affiliates in theUnited States and/or other countries. All otherbrand names, product names, or trademarksbelong to their respective holders.

AS-interface® is a registered trademark of AS-International.

DeviceNet® is a registered trademark of ODVA.

Foundation™ fieldbus is a registered trademarkof the Fieldbus Foundation.

ModBus® is a registered trademark of SchneiderAutomation, Inc.

PROFIBUS® is a registered trademark ofPROFIBUS International.

Keystone and Westlock

TVCMC-0400-US-0710

K-Block Position Monitor

K-Switch™ Quarter-turnPosition Indicator

2007/9479

Westlock Network Solutions: Intellis Intellis is a family of industrial control field Network Monitors which use embeddedcontrol systems to automate valves and link fed I/O to the host PLC or DCS.Network Monitors are standard Westlock Control Monitors with the addition of anetwork I/O module.

XR

K-10

765

Westlock Control Monitors: QuantumQuantum products offer a fully integrated solution for the monitoring and control of process valves. Combining sensors, Falcon low-powered solenoids, junctionhousings and a local visual position indicator in one compact unit suitable forweatherproof and hazardous location service, Westlock offers an extremely efficient and cost effective method for the monitoring and controlling of rotary and linear valves.

Westlock Analog PositionersWestlock Controls offers a variety of solutions for the precise positioning of rotaryand linear pneumatic actuators. These positioners are suitable for use with eitherdouble acting or spring return actuators. Mounting options include the ModMount®,NAMUR standards (VDI/VDE 3845) or actuator special kits. These units alsoprovide the simplest form of installation and calibration as standard, without therequirement for additional equipment.

9468/2004

877

P-10

ICoT

Tyco Flow Control - AmericasWith sales and distribution operations in strategic locations throughoutthe world, Tyco Flow Control is a global, single-source supplier ofinnovative flow control solutions.

United StatesAnaheim, CaliforniaPhone: 951-493-4227Fax: 951-735-9601

Atlanta, GeorgiaPhone: 770-326-5654 Fax: 770-326-2989

Baton Rouge, LouisianaPhone: 225-751-9000Fax: 225-751-0130

Chicago, IllinoisPhone: 630-343-3333Fax: 630-343-3334

Denver, ColoradoPhone: 303-264-5400Fax: 303-371-8807

Pasadena, TexasPhone: 832-261-2400Fax: 281-291-8801

Philadelphia, PennsylvaniaPhone: 610-296-2000Fax: 610-296-8038

Seattle, WashingtonPhone: 425-789-3135Fax: 425-353-8490

St. Louis, MissouriPhone: 314-428-3888Fax: 314-428-9829

CanadaBurlington, OntarioPhone: 905-319-3406Fax: 905-319-3529

Calgary, AlbertaPhone: 403-538-0090Fax: 403-279-8441

Edmonton, AlbertaPhone: 780-461-2228Fax: 780-461-6242

Montreal, QuebecPhone: 450-978-6640Fax: 450-978-6641

Latin America/CaribbeanArgentina - Buenos Aires:Argentina, Bolivia, Paraguay,Uruguay Phone: 54-11-4308-6444Fax: 54-11-4308-6445

Brazil - Sorocaba-São PauloPhone: 55-15-2102-8700Fax: 55-15-2102-8742

Chile - Santiago:Chile, PeruPhone: 562-410-9000Fax: 562-538-0050

Mexico - El Salto, JaliscoPhone: 52-33-3668-4099Fax: 52-33-3668-4012

Miami Lakes, Florida:Caribbean, Central America,Colombia, Ecuador, Guyana,Surinam, VenezuelaPhone: 305-448-0059Fax: 305-448-1632

Venezuela - Caracas Phone: 58-212-286-3735Fax: 58-212-285-3316

Tyco Flow Control (TFC) provides the information herein in good faith but makes no representation as to its comprehensiveness or accuracy. This data sheet is intended only as a guide to TFCproducts and services. Individuals using this data sheet must exercise their independent judgment in evaluating product selection and determining product appropriateness for their particularpurpose and system requirements. TFC MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT(S) TO WHICH THE INFORMATION REFERS.ACCORDINGLY, TFC WILL NOT BE RESPONSIBLE FOR DAMAGES (OF ANY KIND OR NATURE, INCLUDING INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES) RESULTING FROMTHE USE OF OR RELIANCE UPON THIS INFORMATION. Patents and Patents Pending in the U.S. and foreign countries. Tyco reserves the right to change product designs and specificationswithout notice.

Flow Control

TVCMC-0400 / Printed in USA / 3M / 0801

www.tycoflowcontrol.com

www.keystonevalves.com

Documents

Butterfly Valves and Accessories Overview · PDF file · 2016-12-12Tyco Flow Control brings together several of the world’s premier brands of butterfly valves and controls developed