Get 20 inches of copper wire (1.0 mm thick) Get one AA battery
Get 6 small magnets.
Slide 3
Slide 4
Slide 5
Slide 6
Make a single stack of 6 magnets. Put the battery on top of the
magnets. Bend the wire into a rectangle with a small circle in the
the middle of the wire. Put the wire over the battery so the circle
will rest on top of the battery. Then have the bottom ends of the
wire touching the magnets.
Slide 7
Slide 8
The wire is being moved by magnetic force. The battery provides
the energy for the wire to spin. The two bottom ends of the wire
touch the magnets and are being pulled by them. This causes the
wire to spin since the wire has a small circle at the top. This
allows the wire to spin on the batterys positive top post.