T-Tech Tattoo Device Inc. strives to make the process of finding your preferred tattoo needle configurations easy and painless. To ensure that you can find everything you want as well as easily utilize our quick order check out, we’d like to show you how to correctly read our SKUs/coding system. The following components are described in order of their appearance on the cartridge SKUs:

T-Tech started off as a cartridge and traditional tattoo needles supplier. That’s why our first generation of cartridges type is named C, simply standing for Cartridge.

T-Tech currently produces and offers two

tattoo needle diameters:

• “12” stands for a standard diameter of each needle point, which is .35mm

• “10” stands for Bugpins, or the finer .30 mm diameter needle points.

The next number you see is the count of needle points in a configuration.

PRODUCT DIAMETER/ NEEDLES CONFIGURATION LENGTH/

TYPE SIZE TIGHTNESS

C 10 27 M1 L

T-Tech offers 5 main configurations, which you can find on our labeling system:

RL

RS

M1

RM

F

Since tightness of a configuration also depends on its taper length, we identify taper length/tightness of a liner right after mentioning your chosen configuration:

T- Super Tight

L- Long Taper

Here’s a full list of T-Tech’s available configurations and their respective taper lengths:

RL – Round Liner

RLT – Tight Round Liner

RS – Round Shader

M1 – Magnum

M1-L – Long Taper Magnum

RM – Round (aka Curved) Magnum

RM-L – Long Taper Round (aka Curved) Magnum

F – Long Taper Flat

PACKAGING

T-Tech Tattoo Device Inc. packages all cartridges based on manufacturing batch. Every package contains 20 individually packaged and EO sterilized tattoo needle cartridges of your chosen configuration.

If you examine the box, it will give you the following information:

• Quantity of individually packaged cartridges

• SKU number defining the items

• LOT number, which identifies the batch

• Date of production

• Date of expiration

Each individual blister packaged cartridge contains specific instructions and easy-to-read labels. This includes:

• SKU, identifying the type of cartridge you are about to use

• Expiration date

• Sterilization warning and identifier, which turns orange when the cartridge has undergone sterilization

PRODUCT DIAMETER/ NEEDLES CONFIGURATION LENGTH/

TYPE SIZE TIGHTNESS

C 10 27 M1 L

RD3 RD5 RD7 RD8 RD9 RD14

1201RL 1205RLT 1207RLT 1208RL 1209RLT 1214RL

1203RLT 1205RL 1207RL 1208RLT 1209RL 1214RLT

1203RL 1007RL 1009RL 1208RS 1211RL 1214RS

1003RL 1205RS 1207RS 1014RL 1218RS

1005RL 1209RS

1203RS 1211RS

F5 F7 F9 F11 F13 F15 F23

1205M1 1207M1 1209M1 1211M1 1213M1 1215M1 1027M1-L

1205M1-L 1207RM 1209RM 1211RM 1213RM 1215RM 1027RM-L

12025F 1007M1-L 1009M1-L 1013M1-L 1015M1-L 1017M1-L 1223RM-L

1007RM-L 1011M1-L 1013RM-L 1015RM-L 1017RM-L

1207M1-L 1009RM-L 1211M1-L 1213RM-L 1215M1-L

1207RM-L 1011RM-L 1211RM-L 1213RM-L 1215RM-L

1207F 1209M1-L

1209RM-L

Just as traditional needles have specially sized tubes, T-Tech uses cartridges that are sized perfectly for specific needle configurations. It is important to know that the number displayed on the cartridge shells pertain only to the size of the shell. The following are the cartridge shell numbers with their needle configurations pairings:

Tight Liners (6-7mm)

Our tight liners come with super long tapers, that range between 6-7 MM allowing T-Tech to produce tight configurations for lining and filling out finer details while tattooing.

Round Liners (4mm)

Round liners are made with 4MM tapers to ensure good and tight fit of various needle points that would hold the ink and decrease spillage.

Shaders, Magnums, and Round Magnums (1.8mm)

All shaders and regular sized mags / curved mags have a 1.8MM taper size that allows for a better ink flow, especially when it comes to thicker lining, shading and colour packing.

Long Taper Magnums, Long Taper Round Magnums and Flats (3.5mm)

All T-Tech long taper mags/curved mags, as well as flats are made with 3.5MM taper.

M1-L FL

M1 RM

RM-L

RLT

RS

RL

TAPER LENGTHS To ensure that all of your tattooing needs are met, different configurations have different taper sizes:

PLUNGERS (Drive Bars)

The coding system is based on length number and ball diameter:

L# = Length

Size (in mm)

D#= Diameter

Size – always 6mm

EXAMPLE: L88D6 is a long drive bar of 88mm in length with a 6mm pushing ball.

GRIPS

*Grip sizes are recorded in millimeters (see conversion table below for sizes in inches)

Style:

CD = Contoured Grip

SD = Standard Grip

Sizes & Conversions* for Grips:

• 19 mm = ¾”

• 25 mm = 1”

• 30 mm = 1.2”

• 32 mm = 1.25”

Colour

BK – Black Aluminum Coating

__ – Knurled Stainless Steel

L= LENGTH D=DIAMETER

L 88 D 60

STYLE SIZE COLOUR

CD 32 BK

T-Tech Tattoo Device Inc.

1947 Leslie St.

Toronto, ON

M3B 2M3

647.800.79.42

ttechtattoo@gmail.com

@ttechofficial @ttechtattoo