X

CableCable FestoonedFestooned Systems

Systems

forfor thethe Crane-Crane- andand HarbourHarbour

RangeRange

A member of theA member of the

Fandstan Electric GroupFandstan Electric Group

X

Also for the electrical supply of the crane trolley Stemmann-Technik offers the suitable product by means of its complete programme of cable festooned systems.

Acc. to the requirements the systems are used for flat- and round cables. The support loads range from 250 to 1000 kg per cable trolley.

Cable festooned systemsCable festooned systems

Stemmann-Technik GmbH effects the complete project management of the cablefestooned system.

The systems supplied by Stemmann-Technik GmbH are characterised by soliddesign and simple maintenance.

A member of theA member of the

Fandstan Electric GroupFandstan Electric Group

X

A member of theA member of the

Fandstan Electric GroupFandstan Electric Group

X

Cable festooned system “KW 320/2“Cable festooned system “KW 320/2“

A member of theA member of the

Fandstan Electric GroupFandstan Electric Group

X

This type has been especially developed for the use of flat cables.

It is used on small to medium-sized crane systems.

Cable festooned system, series “KW 215“Cable festooned system, series “KW 215“

Technical data:

• a support can be equipped completely from one side

• rubber block clamping

• support load up to 250 kg

• travel speed up to 210 m/min

• use of rubber- and steel-tension ropes

A member of theA member of the

Fandstan Electric GroupFandstan Electric Group

X

This cable trolley type has been developed for the use on big crane systems and for high loads at high travel speeds at the same time.

Cable festooned system, series “KW 310“Cable festooned system, series “KW 310“

Technical data:

• up to 3 supports among each other, to be equipped from both sides

• suitable for round- and flat cables

• block- and individual clamping possible

• support load up to 500 kg per trolley

• in reinforced version up to 1000 kg per trolley

• travel speed up to 240 m/min

A member of theA member of the

Fandstan Electric GroupFandstan Electric Group

X

Big cable trolleys:

A member of theA member of the

Fandstan Electric GroupFandstan Electric Group

X

A member of theA member of the

Fandstan Electric GroupFandstan Electric Group

X

For the calculation of a festoon system the following parameters are needed:• Travel distance, Travel speed

• Sag from lower edge of rail, Place of application (indoor / outdoor)

• Special ambient influences (e. g. acids, vapours, dust, see climate, etc.)

• Number of cables to be transported, Type of cale (round cable, flat cable, hose)

• Dimensions (diameter, resp. height / width, weight), Bending radius, Material of rollers

Calculation of a festoon systemCalculation of a festoon system

A member of theA member of the

Fandstan Electric GroupFandstan Electric Group

X

ReferencesReferences

Cable festooned systems in heavy version:

Salzgitter Kocks (Germany), Bremer Lagerhausgesellschaft (Germany), Thyssen-Stahl (Germany), HHLA (Germany), Dillinger Stahlbau (Germany), Demag Fördertechnik (Germany), Deutsche Tiefbohr AG (Germany), Dango & Diedenthal (Germany), Demag Lauchhammer (Germany), Pohlig-Heckel-Bleichert (Germany), Krupp (Germany), Ohrenstein & Koppel (Germany), Vulkan Kocks (Germany), Gewerkschaft Schalker Eisenhütte (Germany), Flohr & Co. (Germany),Electro-Stemmann (Luxembourg), Cockerill Ougree (Belgium), Cockerrill-Ferblatil (Belgium), Safak-Sclessi (Belgium), Ateliers Belges Reunis (Belgium), Fabrique de fer de Charleroi (Belgium), Heuz-Malvezetsimon Reunis (Belgium), Femont (Belgium), Femont (Belgium), Sidmar (Belgium), Metallurgie de Hoboken (Belgium), Cockerill Yards (Belgium), Tolmatil (Belgium), Minière Metallurgique (Belgium), Ateliers du Thiriau (Belgium), Stemmann B.W. (USA), Nippon Ican (Japan), Rima S.r.l. (Italy), Landre-Mijnssen B. V. (Netherlands), Kone (Finland), Solmer (France), Sacilor (France), Brecknell & Willis (GB), Ringsdorfff-Carbon-Corp. (GB), Ringsdorfff-Carbon-Corp. (South-Africa), Nelcon-ECT (Belgium), Nelcon – Hessenatie (Netherlands), Liebherr (Ireland), Hyundai Heavy Industries (Korea), Mitsubishe Heavy Industries (Korea), Vulkan Kocks for Honolulu (Honolulu), Ansaldo for Port of Malta (Port of Malta)

A member of theA member of the

Fandstan Electric GroupFandstan Electric Group

X

Thanks a lot

Thanks a lotfor yourfor yourattention!

attention!

A member of theA member of the

Fandstan Electric GroupFandstan Electric Group