Upload
audrey-little
View
215
Download
0
Tags:
Embed Size (px)
Citation preview
CABLE TRAY LSS1 – VISIT MARCH 24TH WITH Y. MUTTONI & G. CANALE
Dorothea PfeifferLTEX Meeting 21.03.2013
2
Cable tray for forward detectors
21.03.2013LTEX Dorothea Pfeiffer
LSS1L: Start of RR13 – UL14 From UL14 to TCL5 (shielding wall): 400
mm x 60 mm From TCL5 to RR13: 200 mm x 60 mm
(cable tray of EN-EL already installed) LSS1R: Start of RR17 – UL16
From UL16 to TCL5 (shielding wall): 400 mm x 60 mm
From TCL5 to RR17: 200 mm x 60 mm (cable tray of EN-EL already installed)
3
In UL14/UL16 (on top of horizontal bar: 400 mm x 60 mm)
LTEX Dorothea Pfeiffer 21.03.2013
Or use the forward detector cable tray?
4
UL14/UL16 to TCL5 (full height: 400 mm x 60 mm)
LTEX Dorothea Pfeiffer 21.03.2013
5
TCL5 to RR13/17 (above EN-EL tray 200 mm x 60 mm)
LTEX Dorothea Pfeiffer 21.03.2013
6
Volume of cables
LTEX Dorothea Pfeiffer 21.03.2013
câbles entre AFP et USA15 (ou US15) par côté
n° Item TypeNumber
Ø (mm)
From-To Notecm2
1 LV cables t.b.d. 2 18
AFP-USA15 or US15
For Si. If cable path length to US15 is much shorter, then the US15 chosen as arrival point
6.482 HV cables t.b.d. 2 6 0.723 Opto interface t.b.d. 4 10 4
4Voltage regulator
t.b.d. 1 101
6 CANBUS t.b.d. 1 12AFP1-USA15 For Si 1.448 DCS (CANBUS) t.b.d. 2 12AFP2-USA15 For Si and Ti 2.88
11 HVSCEM 04.31.52.050.8
1 11AFP2-USA15 For Ti1.21
12 LV t.b.d. 1 11AFP2-USA15 or US15
Same place as for Si1.21
15 Analog signal CMC50 20 15AFP-US15 BPM 45
16 Ethernet RJ45 5 6 BPM 1.8
17 Motor t.b.d. 2 20AFP-USA15 Movement system 8
18 Resolver t.b.d. 2 10AFP-USA15 Movement system2
19
Pressure, temperature, LVDT, switches+spares
t.b.d. 20 10AFP-USA15DCS for secondary vacuum, movement, etc..
20
nbre câbles /côté 63 section câbles 95.74
Diameter needed, estimated by G. Canale