Cables Telecom

CommunicationCablesFIBER OPTICS �OPGW � FTTH

2 _ Optical Cables

TAIHAN has served a pivotal role in establishing communication networks from backbone networks to

local loops both in Korea and major overseas markets. As demand of high capacity and high speed IT

expands recently, TAIHAN provides optimal communication environment where various information

can be delivered promptly and accurately based on our technology of producing high quality optical

fiber. TAIHAN will lead the ubiquitous environment with optimal solutions for communication infra from

backbone to FTTH network.

CONNECTING THE WORLD BY TAIHAN COMMUNICATION CABLES

ContentsFIBER OPTICS 4OPGW 34FTTH 38APPENDIX 54

Optical Cables _ 3

HISTORY OF TAIHAN COMMUNICATION CABLES

1955. Founded Taihan Electric Wire Co., Ltd. 1961. Produced the lead sheathed communication cable 1964. Acquired KS mark

for wire and cable 1965. Produced 1.2/4.4mm fine conductor coaxial cable 1968. Started production of stalpeth cable 1974.

Acquired UL and CSA certificate first time in Korea 1976. Produced standard coaxial cable 1978. Developed optical fiber cable

1979. Installed the optical cable networks in Seoul 1983. Produced foam skin communication cable first time in Korea 1984.

Completed optical fiber cable plant in Anyang / Produced multiple and single mode optical fiber cable 1985. Supplied the opti-

cal fiber cable for Seoul Olympic communication networks 1986. Acquired the KS Mark for high frequency coaxial cable / Won

the Prime Minister Award meritorious service in national backbone communication network 1987. Manufactured Optical Fiber

Ground Wire (OPGW) / Developed high foamed coaxial cable for CATV 1988. Developed submarine optical fiber cable and

leakage coaxial cable 1989. Developed optical fiber cable for emergency 1991. Supplied 565Mb/s optical transmission system

to KT 1993. Acquired ISO 9001 certificate on cable 1994. Developed 345kV OPGW 1996. Developed optical distribution board,

optical terminal box and 765kV OPGW 1997. Developed ribbon type optical fiber cable 1998. Commercialized the multiple

mechanical optical connector / Developed Non-Zero Dispersion Shifted optical fiber 2000. Acquired ISO 9001 certificate on

OPGW 2001. Acquired UL and KS certificate on Unshielded Twisted Pair (UTP) cable 2002. OPTOMAGIC, TAIHAN’s sub-

sidiary specialized in optical fiber completed optical fiber plant 2004. Developed FTTH total solution / Participated in BcN

(Broadband convergence Network) business (Ubinet consortium construction of FTTH) 2005. Developed Cat.7 Data Cable

2006. TAIHAN succeeded in developing holey fiber for the first time in Korea 2007. Developed Radiation High Foamed Coaxial

Cable (RCX) 42D cable

4 _ Optical Cables

Optical Cables _ 5

TAIHAN had led the development of optical fiber markets through continuous investment in technology and facility

since its first development in 1978. TAIHAN has produced optical fiber for VAD (Vapour - phase Axial Deposition)

method. TAIHAN has developed new products like zero water peak fiber for entire wavelength, NZ-DSF for 40Gbps

high-speed information, and bending loss insensitive fiber. With the development of holey fiber for FTTH in 2006, TAI-

HAN taking the lead in establishing the next generation IT network. Using such quality optical fiber, TAIHAN produce

and supply various kinds of optical cables for duct, aerial and direct buried.

FIBER OPTICS

ContentsOptical Fibers & CablesSMF ITU-T G.652.B 6ZWPF ITU-T G.652.D 8Bending Loss Insensitive Fiber ITU-T G.657 10NZ-DSF ITU-T G.655.C, G.656 12Tight Buffered Fiber 14Ribbon Fiber 16Loose Tube Cable for Duct 18Loose Tube Cable for Direct Buried 19Loose Tube Cable for Aerial (ADSS Type) 20Loose Tube Cable for Aerial (FIG 8 Type) 22Ribbon Slot Cable 23Ribbon Tube Cable 24Optical Micro Cable 25Loose Tube Cable for CATV Network 26High-count Loose Tube Cable (600-fiber) 27Submarine Optical Cable 28

Optical ApparatusFiber Optic Connectivity 29Optical Termination Cable 30Optical Multi Jumper Cable 31Optical Distribution Frame 32Fiber Optic Terminating Boxes 33Fiber Optic Cable Emergency Repairing Systems 34

6 _ Optical Fibers & Cables

Optical Fibers & Cables

SMF ITU-T G.652.B

�Conspicuous lower attenuation�Superior bending performance�Mechanically strippable coating�Excellent geometric properties for low splicing loss�Transmission capacity at 1310 ㎚ and 1550 ㎚

Feature

�Data communication cable�FTTH network cable�Long haul telecommunication cable�CATV cable

Use / Application

Refractive Index Profile

Test Attenuation change @1550 ㎚(㏈/㎞)

Temperature cycling performance

Temperature humidity test

Water immersion

Heat aging

- 60℃ to + 85℃

+ 85℃, 98%, 30 days

+ 23℃, 30 days

+ 85℃, 30 days

≤ 0.05

≤ 0.05

≤ 0.05

≤ 0.05

Core_8 ㎛

Cladding_125 ㎛

UV acrylate coating_242 ㎛

0.36%_Refractive

Index Profile

Structure

Environmental Characteristic

Single Mode Optical Fiber (VAD Process)TAIHAN’s single mode optical fiber is manufactured by the vapour - phase axial deposition (VAD) proecss to produce the highest quality glass with excellent geometry, high strength characteristics and attenuation levelthat approaches the theoretical minimum, and designed to operate at 1310 nm and 1550 nm. Its optical prop-erties are achieved through a germanium doped silica core with a pure silica cladding. A dual acrylate pro-tective coating is applied over glass to provide the maximum fiber lifetime.

Optical Fibers & Cables _ 7

Spectral Attenuation Weibull Parameter

≤ 0.35 ㏈ /㎞ (≤ 0.334 ㏈ /㎞ for fiber)

≤ 0.21 ㏈ /㎞ (≤ 0.194 ㏈ /㎞ for fiber)

≤ 0.5 ㏈ /㎞

≤ 0.05 ㏈ /㎞ (1310 ㎚ )

≤ 0.05 ㏈ /㎞ (1550 ㎚ )

≤ 0.03 ㏈ /㎞ (Max - Min)

≤ 0.05 ㏈

≤ 1300 ~ 1322 ㎚

≤ 0.092 ps/(㎚ 2. ㎞ )

≤ 3.5 ps/(㎚ . ㎞ )

≤ 18 ps/(㎚ . ㎞ )

≤ 1260 ㎚

≤ 0.15 ps/ ㎞

≤ 0.1 ps/ ㎞

Fiber length

Spool dimension Flange diameter Nom.

Barrel diameter Nom.

Inner width Nom.

Outer width Nom.

Bore diameter Nom.

25.2 / 50.4 ㎞

234.5 / 265 ㎜

152.0 / 170 ㎜

96.0 / 150 ㎜

116.0 / 175 ㎜

25.4 / 25.4 ㎜

Packaging

Attenuation at 1310 ㎚

at 1550 ㎚

at 1383 ± 3 ㎚

Attenuation change at 1285 ~ 1330 ㎚

at 1525 ~ 1575 ㎚

at 1575 ~ 1610 ㎚

Point discontinuity at 1310 ㎚ and 1550 ㎚

Zero dispersion wavelength

Zero dispersion slope

Chromatic dispersion at 1285 ~ 1330 ㎚

at 1550 ㎚

Cable cut-off wavelength

PMD for individual value (uncabled fiber)

for link value

Optical Characteristic

√

√

Performance Specification

Performance Characteristic

Mode field diameter

Cladding diameter

Core/cladding concentricity error

Cladding non-circularity

Fiber curl radius

Primary coating diameter (For uncolored fiber)

Primary coating diameter (For colored fiber)

Coating/cladding concentricity error

Fiber proof test level

9.2 ± 0.4 ㎛ at 1310 ㎚

10.4 ± 0.5 ㎛ at 1550 ㎚

125.0 ± 0.7 ㎛

≤ 0.5 ㎛

≤ 0.7%

≥ 4 m

242 ± 5 ㎛

250 ± 10 ㎛

≤ 12 ㎛

≥ 120 kpsi (1.2 % strain)

Geometrical Characteristic



ZWPF ITU-T G.652.D

�Conspicuous lower attenuation�Superior bending performance�Mechanically strippable coating�Excellent geometric properties for low splicing loss�Transmission capacity at 1285 nm to 1625 nm

Feature

�Data communication cable�FTTH network cable�Long haul telecommunication �CATV cable�Long term reliability for attenuation

Use / Application


Core_8 ㎛

Cladding_125 ㎛


0.36%_Refractive

Index Profile

Structure

Zero Water Peak Single Mode Fiber (VAD Process)TAIHAN's Anywave single mode fiber (Zero water peak fiber) is manufactured by the vapour - phase axialdeposition (VAD) process to produce the highest quality glass with excellent geometry and high strengthcharacteristics. Anywave can be used in all wavelength from 1280 nm to 1620 nm because OH ion is per-fectly eliminated in specially designed manufacturing process. Anywave is reliable for any wavelengthdivision. Anywave enables customers to construct high performance network for data transmission in WDMsystem.




Water immersion

Heat aging

- 60℃ to + 85℃

+ 85℃, 98%, 30 days

+ 23℃, 30 days

+ 85℃, 30 days

≤ 0.05

≤ 0.05

≤ 0.05

≤ 0.05



Spectral Attenuation


Weibull Parameter


Mode field diameter

Cladding diameter



Fiber curl radius





9.2 ± 0.4 ㎛ at 1310 ㎚

10.4 ± 0.5 ㎛ at 1550 ㎚

125.0 ± 0.7 ㎛

≤ 0.5 ㎛

≤ 0.7%

≥ 4 m

242 ± 5 ㎛

250 ± 10 ㎛

≤ 12 ㎛


≤ 0.35 ㏈ / ㎞ (≤ 0.334 ㏈ /㎞ for fiber)

≤ 0.21 ㏈ / ㎞ (≤ 0.194 ㏈ /㎞ for fiber)

≤ 0.31 ㏈ / ㎞ (after H2aging)

≤ 0.05 ㏈ /㎞ (1310 ㎚ )

≤ 0.05 ㏈ / ㎞ (1550 ㎚ )

≤ 0.03 ㏈ /㎞ (Max - Min)

≤ 0.05 ㏈

≤ 1300 ~ 1322 ㎚

≤ 0.092 ps/(㎚ 2. ㎞ )

≤ 3.5 ps/(㎚ . ㎞ )

≤ 18 ps/(㎚ . ㎞ )

≤ 22 ps/(㎚ . ㎞ )

≤ 1260 ㎚

≤ 0.15 ps/ ㎞

≤ 0.1 ps/ ㎞


Fiber length



Inner width Nom.

Outer width Nom.

Bore diameter Nom.

25.2 / 50.4 ㎞

234.5 / 265 ㎜

152.0 / 170 ㎜

96.0 / 150 ㎜

116.0 / 175 ㎜

25.4 / 25.4 ㎜

Packaging


at 1550 ㎚

at 1383 ± 3 ㎚


at 1525 ~ 1575 ㎚

at 1575 ~ 1610 ㎚





at 1550 ㎚

at 1625 ㎚



for link value


√

√



Bending Loss Insensitive Fiber ITU-T G.657. A & B

�Fully compliant with ITU-T G.652.D & G.657. A & B�Allowable bending diameter : 20 ㎜�1/3 Bending diameter compared to conventional SMF(60 ㎜ )�Good splicing with conventional SMF and ZWPF

Feature

�Fully compatibility with conventional SMF�Minimized construction space�FTTH / Premise/LAN cables�Air blown fiber�Optical cord

Use / Application





Water immersion

Heat aging

- 60℃ to + 85℃

+ 85℃, 98%, 30 days

+ 23℃, 30 days

+ 85℃, 30 days

≤ 0.05

≤ 0.05

≤ 0.05

≤ 0.05

Core_7.5 ㎛

Cladding_125 ㎛


0.44%_Refractive

Index Profile

Structure

Environmental Characteristice

Bending Loss Insensitive Fiber ITU-T G.657 (VAD Process)TAIHAN's bending loss insensitive fiber (Strong Bend) manufactured by the vapour - phase axial deposition(VAD) process enables the use of the entire optical fiber spectrum (1280 nm~1625 ㎚ ) including 1360nm~1460 ㎚ due to a manufacturing process that virtually eliminates hydroxy (OH-) absorption in the fiber.It's low sensitivity to macrobending results in lower attenuation levels in the 1550 ㎚ and 1625 ㎚ wave-length region.



≤ 0.35 ㏈ /㎞ (≤ 0.34 ㏈ /㎞ for fiber)

≤ 0.22 ㏈ /㎞ (≤ 0.20 ㏈ /㎞ for fiber)

≤ 0.24 ㏈ /㎞ (≤ 0.23 ㏈ /㎞ for fiber)

≤ 0.31 ㏈ /㎞ (after H2aging)

≤ 0.05 ㏈ /㎞ (1310 ㎚ )

≤ 0.05 ㏈ /㎞ (1550 ㎚ )

≤ 0.03 ㏈ /㎞ (Max - Min)

≤ 0.05 ㏈

1300 ~ 1322 ㎚

≤ 0.092 ps/(㎚ 2. ㎞ )

≤ 3.0 ps/(㎚ . ㎞ )

≤ 18 ps/(㎚ . ㎞ )

≤ 1260 ㎚

≤ 0.15 ps/ ㎞

≤ 0.1 ps/ ㎞

Fiber length



Inner width Nom.

Outer width Nom.

Bore diameter Nom.

6.3 ~ 25.2 ㎞ in multiples of 2.1

234. 5 ㎜

152.0 ㎜

96.0 ㎜

116.0 ㎜

25.4 ㎜

Packaging

Macrobending loss

for 100 turns at a 50 ㎜ mandrel diameter

for single bend (20 ㎜ diameter one turm)

Coating strip force

≤ 0.05 ㏈ @ 1625 ㎚

≤ 0.15 ㏈ @ 1625 ㎚

1.3 ~ 8.9 N

Mechanical Characteristic


at 1550 ㎚

at 1625 ㎚

at 1383 ± 3 ㎚


at 1525 ~ 1575 ㎚

at 1575 ~ 1610 ㎚





at 1550 ㎚



for link value


√

√


Mode field diameter

Cladding diameter



Fiber curl radius




8.6 ± 0.4 ㎛ at 1310 ㎚

125.0 ± 0.7 ㎛

≤ 0.5 ㎛

≤ 0.7%

≥ 4 m

242 ± 5 ㎛

250 ± 10 ㎛





NZ-DSF ITU-T G.655, G.656

�Optimatized for effective operating of WDM system�10Gbps, 40Gbps, and higher data rates�Superior performance for long haul networks�Lower sensitivity of transmission properties�Broad - range low attenuation properties

Feature

�Submarine cables�Voice, video and data transmission�Long haul WDM system�Long distance applications

Use / Application

Core_6 ㎛

Cladding_125 ㎛


0.36%_Refractive

Index Profile

Structure

Non-Zero Dispersion Shifted Optical Fiber (VAD Process)TAIHAN's non-zero dispersion shifted single mode fiber (NZF) is operated for WDM system, which enablescustomers to construct high performance networks for voice, video and/or data transmission. its high perfor-mances are achieved through a germanium doped double silica cladding made by the vapour - phase axialdeposition (VAD) method. A dual layer acrylate is coated over the cladding to provide high product reliabilityand allows easy splicing throughout the cable life. The fiber operates in C-band, L-band and S-band.





Water immersion

Heat aging

- 60℃ to + 85℃

+ 85℃, 98%, 30 days

+ 23℃, 30 days

+ 85℃, 30 days

≤ 0.05

≤ 0.05

≤ 0.05

≤ 0.05



Chromatic Dispersion


Weibull Parameter


ITU-T G.655.A ITU-T G.655.C, 656

Mode field diameter

Cladding diameter



Fiber curl radius





8.2 ±0.5 ㎛ at 1550 ㎚

125.0±0.7 ㎛

≤0.5 ㎛

≤0.7 %

≥ 4 m

242 ±5 ㎛

250 ±10 ㎛

≤ 12 ㎛

≥ 120 kpsi

9.2 ±0.5 ㎛ at 1550 ㎚

125.0±0.7 ㎛

≤0.5 ㎛

≤0.7%

≥ 4 m

242 ±5 ㎛

250 ±10 ㎛

≤ 12 ㎛

≥ 120 kpsi

≤ 0.22 ㏈ /㎞

≤ 0.25 ㏈ /㎞

≤ 0.10 ㏈

2.0 ~ 6.0 ps/ (㎚ , ㎞ )

4.0 ~ 1.0 ps/ (㎚ , ㎞ )

≤ 1300 ㎚

≤ 0.15 ps/ ㎞

≤ 0.1 ps/ ㎞


Fiber length



Inner width Nom.

Outer width Nom.

Bore diameter Nom.

25.2 ㎞

234.5 ㎜

152.0 ㎜

96.0 ㎜

116.0 ㎜

25.4 ㎜

Packaging


at 1625 ㎚

Point discontinuity at 1550 ㎚

Chromatic dispersion at 1530 ~ 1565 nm

at 1560 ~ 1625 nm

Cable cut-off wavelength (λcc)


for link value


√

≤ 0.22 ㏈ /㎞

≤ 0.25 ㏈ /㎞

≤ 0.10 ㏈

5.5 ~ 10ps/ (㎚ , ㎞ )

7.5 ~ 13.5ps/ (㎚ , ㎞ )

≤ 1450 ㎚

≤ 0.15 ps/ ㎞

≤ 0.1 ps/ ㎞√

√

√



Tight Buffered Fiber

�12 Color coding�Available in single mode and multi-mode fibers�Highly flexible and light weight for easy handling�Easy strippig for quick splicing�Various coating material available�Diameter up to 900 ㎛

Feature


�Easy identification for improved cable management in routing and termination�Non-conductive design�Flame-retardant design�Inter-equipment connections that are indoors or in controlled environments�Computer data links, terminal links, inter-frame, internal connections

�500 ㎛ (� 0.50 ㎜ )

or

�900 ㎛ (� 0.90 ㎜ )

�UV-Acrylate

or

�UV-Silicon

Use / Application

Tight Buffered FiberTAIHAN's tight buffered optical fiber is used in inter-equipment, fiber optic transmission system requiringfiber optic cable. Tight buffered fiber is color coded for easy identification allowing improved cable man-agement in routing and termination in indoor cable applications. It is suitable for use in computer datalinks, terminal links, inter-frame, and internal connections.

Fiber types

Buffered Construction Standard Diameter Tight Buffer Material

Maximum attenuation(㏈/㎞)

Typical attenuation(㏈/㎞)

SMF (9/125) (single mode fiber)

1310 ㎚ / 1550 ㎚

MMF (50/125) (multi- mode fiber)

850 ㎚ / 1300 ㎚

MMF (62.5/125) (multi- mode fiber)

850 ㎚ / 1300 ㎚

0.4 / 0.25

3.0 / 1.0

3.0 / 1.0

0.35 / 0.20

2.5 / 0.5

2.7 / 0.6

Cabled Attenuation

Buffered Dimension & Materials

Core

Cladding

UV acrylate coating

Tight buffer


Ordering information

9 / 125 SMF (single mode fiber)

50 / 125 MMF (multi-mode fiber)

62.5 / 125 MMF (multi-mode fiber)

1. Select Fiber Type

UV-acrylate

UV-silicon

2. Select Buffer Materials

500 ㎛ Buffer diameter

900 ㎛ Buffer diameter

3. Select Inner Jacket Materials



Ribbon Optical Fiber

�Small diameter cable by high density fiber�Precise fiber geometry�Easily accessible individual fibers�Reduce the installation cost by easy handling and low weight

Feature

Dimension

�Easy handling, installation and shipping�Installation costs and cable weight�Available for distribution of dense metropolitan area

Use / Application

4 Fiber

Construction

Ribbon Optical FiberTAIHAN's ribbon optical fiber is available in standard counts of 4,8,12 fibers to meet a wide variety ofapplications. Ribbon fiber is used in applications requiring high communication rate and high fiber densityin small area. Also ribbon fiber offers precise fiber geometries for mass precision splicing and multi-fiberarray. Its high performance is achieved through a germanium doped double silica cladding produced bythe vapour - phase axial deposition (VAD) method.

unit_ ㎛

① ② ③ ④

8 Fiber

① ② ③ ④ ⑤ ⑥ ⑦ ⑧

12 Fiber

① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫

Fig 1 : Cross-Section of 4-12 optical fiber ribbon

Refractive Index ProfileTest Attenuation change @1550 ㎚

Temperature cycling test (TIA / EIA 455-3)

Temperature humidity test (+ 85℃, 98%, 30 days)

Water immersion(+23℃, 14 days)

≤ 0.05 ㏈ /㎞ (-40℃ to +70℃)

≤ 0.1 ㏈ /㎞

≤ 0.1 ㏈ /㎞ (+23℃)

Environmental Characteristice

Fiber countWidth(W)

Typical Max.Height(h)

Typical Max.

Planarity(p)

310 ± 20

310 ± 20

310 ± 20

1100

2150

3150

1150

2200

3200

25

30

35

15

20

25

4

8

12



≤ 0.35 ㏈ /㎞

≤ 0.22 ㏈ /㎞

≤ 0.30 ㏈ /㎞

≤ 0.05 ㏈ /㎞ (1310 ㎚ )

≤ 0.05 ㏈ / ㎞ (1550 ㎚ )

≤ 0.03 ㏈ / ㎞ (Max - Min)

≤ 0.05 ㏈

≤ 1300 ~ 1322 ㎚

≤ 0.092 ps/(㎚ 2. ㎞ )

≤ 3.5 ps/(㎚ . ㎞ )

≤ 18 ps/(㎚ . ㎞ )

≤ 22 ps/(㎚ . ㎞ )

≤ 1260 ㎚

≤ 0.15 ps/ ㎞

≤ 0.1 ps/ ㎞

Mode field diameter

Cladding diameter







9.2 ± 0.4 ㎛ at 1310 ㎚

10.4 ± 0.5 ㎛ at 1550 ㎚

125.0 ± 0.7 ㎛

≤ 0.5 ㎛

≤ 0.7%

242 ± 5 ㎛

250 ± 10 ㎛

≤ 12 ㎛

120 kpsi (1.2% strain)


5.1 Delivery length of each ribbon bobbin shall be in multiples of 2 ㎞ . Maximum lenght

shall be changed upon special agreement to within the maximum take-up

length specified in Table. 1

5.2 Dimensions of ribbon bobbin are specified in Table. 1.

5.3 Ribbon bobbin shall be packaged with anti-moisyure, anti-vibration and anti-shock

to maintain the ribbon’s performance.

<Table.1>

Packaging


at 1550 ㎚

at 1383 ㎚


at 1525 ~ 1575 ㎚

at 1575 ~ 1610 ㎚


zero dispersion wavelength

zero dispersion slope


at 1550 ㎚

at 1625 ㎚



for link value


√

√

≤ 8 ㎝

＞25 ㎜

Fully peelable

Residual twist (TIA / EIA-455-131)

Strippability (Bellcore GR-20)

Peelability (Bellcore GR-20)

Mechanical Characteristic

Type

A

B

410

410

310

310

170

390

102

322

12 ㎞

35 ㎞

∅25.5 or 50.9

∅ 25.5 or 50.9

FlangeDiameter

Barrel Diameter

Outside Width Inside Width Axial hole Diameter

Maximum Take-up Length

★

★ Maximum Take-up Length is based on 4 optical fiber ribbon


� Optical fiber Single mode optical fiber (SMF), multi mode optical fiber (MMF), non-zero dispersion shifted optical fiber (NZ-DSF)

� Central strength member Galvanized steel wire or fiber reinforced plastic (FRP)� Moisture barrier 1 Water blocking jelly filling compound or water blocking yarn � Loose tube Thermoplastic material (polybutylene terephthalate)� Filler Polyethylene string� Wrapping tape Non-hygroscopic plastic tape or water blocking tape (optional)� Moisture barrier 2 Laminated aluminum tape (optional) � Sheath Black polyethylene� Non-metal strength member Glass yarn or aramid yarn

Construction

Dry Type Jelly Type


Loose Tube Cable for Duct

�Standard fiber count : 2~312 fibers �Excellent optical performance�Excellent mechanical and environmental performance �High tensile strength design�Anti-termite treatment (optional) �Dry or jelly filled type

Feature

�Local area network (LAN) �Subscriber network system �Long haul communication system

Application

Cable Specification

Dry type

Outer dia.(㎜) Cable wt.(㎏/㎞)

Jelly filled type


Mechanical & Environmental Characteristic

Allowable tensile strength

Crush resistance

Minimum bending diameter

Operating temperature range

Delivery length

Characteristic UnitDry type

135~450 180~550

20

20 times of cable diameter


-40 � +70℃

1 � 6

Jelly filled type

Dynamic

Static

㎏ f

㎏ f/㎝

㎜

℃

㎞

Specification

�

�

�

�

�

�

�

�

�

2~36

48~72

74�96

98�120

122~144

288

312

10.5

11.1

12.5

13.9

15.5

18.2

19.0

90

102

130

158

195

253

276

10.9

11.5

12.8

14.2

15.8

18.5

19.3

122

136

142

174

214

341

374

No. of fibersNo. of fibers per tube

6

12



� Central strength member Galvanized steel wire or fiber reinforced plastic (FRP)� Moisture barrier 1 Water blocking jelly filling compound or water blocking yarn � Loose tube Thermoplastic material (polybutylene terephthalate)� Filler Polyethylene string� Wrapping tape Non-hygroscopic plastic tape or water blocking tape� Moisture barrier 2 Laminated aluminum tape (optional)� Inner sheath Black polyethylene� Armored layer Copolymer coated steel tape (steel tape armored) or steel wire armored� Outer sheath Black polyethylene

Construction

�

�

�

�

�

�

�

�

�

�

Steel tape armored Steel wire armored


Loose Tube Cable for Direct Buried

�Standard fiber count : 2~312 fibers �Excellent optical performance�Excellent mechanical and environmental performance �High tensile strength design�Anti-termite and anti-rodent treatment (optional) �Dry or jelly filled type

Feature


Application

Cable Specification

No. of fibers per tube No. of fibers

Steel tape armored


Steel wire armored




Crush resistance



Delivery length

Characteristic UnitSteel tape armored

200~500 500~2000

40



-40 � +70℃

1 � 6

Steel wire armored

Dynamic

Static

㎏ f

㎏ f/㎝

㎜

℃

㎞

Specification

2~36

48~72

74~96

98~120

122~144

288

312

14.6

15.2

16.6

18.2

19.8

21.6

22.4

200

217

250

295

344

406

436

15.9

16.5

17.9

19.5

21.1

23.0

23.8

419

451

508

584

666

770

816

6

12



� Central strength member Galvanized steel wire or fiber reinforced plastic (FRP) �ADSS type : FRP� Moisture barrier Water blocking jelly filling compound or water blocking yarn � Loose tube Thermoplastic material (polybutylene terephthalate)� Filler Polyethylene string� Wrapping tape Non-hygroscopic plastic tape or water blocking tape� Inner sheath Black polyethylene � Armored layer Aramid yarn (Lashing aerial type: steel tape)� Outer sheath Black polyethylene

Construction

�

�

�

�

�

�

�

�

�


Loose Tube Cable for Aerial (ADSS Type)

�Standard fiber count :2~144 fibers �Protection from lighting and electrical interference�Excellent mechanical and environmental performance �Dry or jelly filled type

Feature

�Local area network (LAN) �Subscriber network system �Long haul communication system�Power line operating system

Application

Cable Specification

6

12

No. of fibers per tube No. of fibers Outer dia.(㎜) Cable wt.(㎏/㎞)

2~30

36~72

74�96

98�120

122~144

15.0

16.0

17.5

19.2

21.0

160

180

230

275

330



Crush resistance



Delivery length

Characteristic Unit

200~800

20



-40 � +70℃

1 � 6

Dynamic

Static

㎏ f

㎏ f/㎝

㎜

℃

㎞

Specification


Cable Specification

6

12


2~30

36~60

62�72

74�96

98~120

122~144

11.7

12.3

12.5

14.0

15.6

17.2

100

110

115

145

180

215



Crush resistance



Delivery length

Characteristic Unit

150~600

20



-40 � +70℃

1 � 6

Dynamic

Static

㎏ f

㎏ f/㎝

㎜

℃

㎞

Specification


Loose Tube Cable for Aerial (ADSS Type)

�Standard fiber count :2~144 fibers �Protection from lighting and electrical interference�Excellent mechanical and environmental performance �Dry or jelly filled type

Feature

�Small diameter and light weight �Subscriber network system �Long haul communication system�Power line operating system

Application


� Central strength member Galvanized steel wire or fiber reinforced plastic (FRP) �ADSS type : FRP� Moisture barrier Water blocking jelly filling compound or water blocking yarn � Loose tube Thermoplastic material (polybutylene terephthalate)� Filler Polyethylene string� Wrapping tape Non-hygroscopic plastic tape or water blocking tape� Armored layer Aramid yarn (Lashing aerial type: steel tape)� Outer sheath Black polyethylene

Construction

�

�

�

�

�

�

�

�



Loose Tube Cable for Aerial (Fig 8 Type)

�Standard fiber count : 2~144 fibers �Excellent mechanical and environmental performance�Dry or jelly filled type

Feature


Application

Cable Specification

6

12


2~36

48~72

74�96

98�120

122~144



Crush resistance



Delivery length

Characteristic Unit

500~1500

30



-40 � +70℃

1 � 4

Dynamic

Static

㎏ f

㎏ f/㎝

㎜

℃

㎞

Specification


� Central strength member Galvanized steel wire or fiber reinforced plastic (FRP) �ADSS type - FRP� Moisture barrier 1 A water blocking jelly filling compound or water blocking yarn � Loose tube Thermoplastic material (polybutylene terephthalate)� Filler Polyethylene string � Wrapping tape Non-hygroscopic plastic tape or water blocking tape� Moisture barrier 2 Laminated aluminum tape� Inner sheath Black polyethylene � Armored layer Copolymer coated steel tape� Outer sheath Black polyethylene� Suspension wire Galvanized steel wire (7/2.0 mm, 7/1.6 mm, 7/1.2 mm, 7/1.0 mm steel wire)

Construction

�

�

�

�

�

�

�

�

�

�

�

14.6 / 25.6

15.2 / 26.2

16.6 / 27.6

18.2 / 29.2

19.8 / 30.8

418

433

467

511

560


� Ribbon 2, 4, 8-fiber ribbon� Central strength member Galvanized steel wire or fiber reinforced plastic (FRP)� Slot Polyethylene slot � Filler Polyethylene resin� Wrapping tape Water blocking tape� Moisture barrier Laminated aluminum tape� Outer sheath Black color polyethylene

Construction

Single slot Multi slot

Cable Specification

Item UnitSingle slot Multi slot

Duct

No. of fiber

Slot dia.

No. of slot

Cable dia.

Cable weight

600

20

1

25

580

1152

11.8

6

43

1350



Crush resistance



Characteristic Unit

40



-40 � +70℃

800 1300

Dynamic

Static

Specification



Optical Fiber Ribbon Slot Cable

�Standard fiber count : 2~over 1152 fibers �Excellent optical performance�Excellent mechanical and environmental performance �Excellent branch and joint performance�Large fiber count with small cable outer diameter

Feature


Application

fiber

㎜

ea

㎜

㎏ /㎞

㎏ f

㎏ f/㎝

㎜

℃

�

�

�

�

�

�

�



Optical Fiber Ribbon Tube Cable

�Standard fiber count : 144~over 864 fibers �Excellent optical performance�Excellent mechanical and environmental performance �Excellent branch and joint performance�Large fiber count with small cable outer diameter

Feature


Application

� Ribbon 4, 8, 12-fiber ribbon� Loose tube Thermoplastic material (Polybutylene terephthalate)� Filling compound Water blocking jelly compound � Central strength member Galvanized steel wire or fiber reinforced plastic (FRP)� Wrapping tape Water blocking tape� Moisture barrier Laminated aluminum tape or steel tape (optional)� Outer sheath Black color polyethylene � Filler Polyethylene string

Construction

Cable Specification

Item UnitSingle tube Multi tube

Duct



Crush resistance



Characteristic Unit

40



-40 � +70℃

270 600

Dynamic

Static

㎏ f

㎏ f/㎝

㎜

℃

Specification


�

�

�

�

�

�

�

�

Single tube Multi tube

No. of fiber

No. of tube

Cable dia.

Cable weight

fiber

ea

㎜

㎏ /㎞

216

1

17.0

260

864

6

29.0

800



� Central strength member Fiber reinforced plastic (FRP)� Moisture barrier Water blocking yarn � Loose tube Thermoplastic material (polybutylene terephthalate)� Filler Polyethylene string� Non-metal strength member Glass yarn or aramid yarn� Sheath Black polyethylene

Construction

�

�

�

�

�

�

�

Cable Specification

6

12


43

45



Crush resistance



Delivery length

Characteristic Unit

100

5



-40 � +70℃

1 � 6

Dynamic

Static

㎏ f

㎏ f/㎝

㎜

℃

㎞

Specification


Optical Micro Cable

�Standard fiber count : 2~60 fibers �Excellent optical performance�Excellent mechanical and environmental performance �Dry or jelly filled type�Small diameter and light weight

Feature

�Local area network (LAN) �Subscriber network system �Fiber to the home (FTTH)

Application

8.0

8.0

6~30

32~60


� Central strength member Fiber reinforced plastic (FRP)� Moisture barrier 1 Water blocking jelly filling compound or water blocking yarn � Loose tube Thermoplastic material (polybutylene terephthalate)� Filler Polyethylene string � Wrapping tape Non-hygroscopic plastic tape or water blocking tape� Moisture barrier 2 Laminated aluminum tape (optional) � Inner sheath Black polyethylene� Armored layer Copolymer coated steel tape or tin coated steel tape� Outer sheath Black polyethylene

Construction


�

�

�

�

�

�

�

�

�

�

Single jacket Double jacket


Loose Tube Cable for CATV Network

�Standard fiber count : 2~288 fibers �Excellent optical performance�Excellent mechanical and environmental performance �High tensile strength design�Anti-rodent treatment �Dry or jelly filled type

Feature

�CATV system network�Local area network (LAN)�Subscriber network system�Long haul communication system

Application

Cable Specification

11.9

13.1

14.6

16.4

18.0

20.5

13.9

15.1

16.6

18.3

20.0

22.5

150

185

230

280

360

450

6

12

No. of fibers per tube No. of fibers

Single jacket


Double jacket


205

240

295

365

420

530

2 ~ 36

48 ~ 72

74 ~ 96

98 ~ 120

122 ~ 144

288



Crush resistance



Delivery length

Characteristic UnitSingle jacket

200~350 200~500

20 40



-40 � +70℃

1 � 6

Double jacket

Dynamic

Static

㎏ f

㎏ f/㎝

㎜

℃

㎞

Specification



High-count Loose Tube Cable (600-fiber)

�High density fiber counts for loose tube core up to 600 fibers�Excellent optical performance �Excellent mechanical and environmental performance

Feature


Application


� Central strength member Galvanized steel wire or fiber reinforced plastic (FRP)� Filling compound Water blocking jelly filling compound � Loose tube Thermoplastic material (polybutylene terephthalate)� Filler Polyethylene string � Wrapping tape Non-hygroscopic plastic tape or water blocking tape� Moisture barrier Laminated aluminum tape � Inner sheath Black polyethylene� Armored layer A corrugated steel tape� Outer sheath Black polyethylene

Construction

Cable Specification

No. of fibers per tube Unit Specification (60-fiber)

No. of tubes

No. of fibers per tube

Cable diameter

Cable weight

EA

EA

㎜

ton/㎞

60

10

47

2.9 (including drum)



Crush resistance



Delivery length

Characteristic Unit

800

30



-40 � +70℃

1 � 2

Dynamic

Static

㎏ f

㎏ f/㎝

㎜

℃

㎞

Specification

�

�

�

�

�

�

�

�

�

�


� Central strength member Galvanized steel wire or Fiber reinforced plastic (FRP)� Filling compound Water blocking jelly filling compound � Loose tube Thermoplastic material (polybutylene terephthalate)� Filler Polyethylene string� Wrapping tape Non-hygroscopic plastic tape or water blocking tape� Moisture barrier Laminated aluminum tape � Inner sheath Black polyethylene � Wrapped paper Non-woven tape � Lead sheath Lead� Outer sheath Black polyethylene� Bedding layer Jute+Asphalt� Wire armoring Galvanized steel wire� Serving layer Jute+Asphalt+CaCo3 layer

Construction


��

Single armoring type Double armoring type


Submarine Optical Cable

�Standard fiber count : 2 ~ 72 fibers �High tensile strength design�Optimized design for underwater application �Excellent mechanical and environmental performance

Feature

�High speed long haul communication system in lakes and rivers

Application



Crush resistance



Delivery length

Characteristic Unit Single Double

3500 5000

500 1000



-30 � +70℃

`1~10

Dynamic

Static

㎏ f

㎏ f/㎝

㎜

℃

㎞

Cable Specification

㎜

ton/㎞

-

Outer diameter

Cable weight

Steel structure

36.5

3.49

� 2.6×34 EAFirst :� 2.6×33 EA

Second :� 4.5×26 EA

49.7

7.22

Unit Single DoubleItem

Optical Apparatus _ 29

Optical Apparatus

Fiber Optic Connectivity

�Convenient handling

�Excellent cohesion efficiency

�Able to attach various connectors

Feature

Optical Fiber Patch Cord (OPC)

�Long-range optical transmission network

�Optical subscriber network

�Optical CATV network

�Optical LAN system

Application

�Convenient handling�Excellent cohesion efficiency�Able to attach various connectors �Excellent geometric properties

Feature

Optical Fiber Fixed Attenuator (OFFA)

�Optical CATV network �Optical subscriber network �Long-range optical transmission network

Application

�Reusable�Implemented low insertion loss and high reflection loss �Easy installation for first time users �Quick installation time (Access within 30 seconds)�Bonding material and electricity is not needed

Feature

Mechanical Splices for Optical Fiber (MS)

�Optical subscriber network�Optical CATV network

�Optical LAN system�Emergence restoration

Application

�Excellent function of reinforcing the optical fiber’s fusion connector

�Multi environmental specification�High reliability

Feature

Optical Fiber Protection Sleeve (OFPS)

�Optical subscriber network �Optical CATV network�Optical LAN system

Application

30 _ Optical Apparatus

Optical Apparatus

Optical Termination Cable

Feature

�Long-range optical transmission network �Optical CATV network �Optical subscriber network

�Low connection loss �Additional access is not needed �Diverse acceptability

Application

Applied Specification

�Cable form : Loose tube, Ribbon slot or tube, Tight bound�No. of Cores : Loose tube type - maximum 312

Ribbon type - maximum 320 Tight bound type - maximum 72

�Applied connector (Abrasive form) : SC (PC or APC), FC (PC or APC), ST (PC), SMA(PC)

�Delivery length : maximum 1,500 m

Construction

Loose tube type

Loose tube Center strength memberJelly filled or dry type Water proof tape Inner sheath (optional) LAP tape (optional)Outer sheath

�

�

�

�

�

�

�

Tight bound type

Wrapping tape Central strength member

Tight buffer tube PE coating FillerOuter sheath

�

�

�

�

�

�

Ribbon slot type

Ribbon optical fiber Water proof tapeUnit strength member Aluminum tape Outer sheath

�

�

�

�

�


Optical Apparatus

Optical Multi Jumper Cable

Feature

Application

Construction

�Low cost �Low connection loss�Additional access is not needed �Diverse acceptability

�Long-range optical transmission network �Optical subscriber network�Optical CATV network �Optical LAN system

Applied Specification

�Cable Form : Breakout cable, Distribution cable�No. of Cores : maximum 72 �Applied Connector (abrasive form) : SC (PC or APC), FC (PC or APC), ST (PC), SMA (PC)

�Delivery Length : maximum 500 m

Breakout Cable

Optical fiber UV- acrglatePVC or nylon Kevlar PVC sheath

Central strenght memberOuter sheathRip cord

�

�

�

�

�

�

�

�

Distiribution Cable

Central strength memberOuter sheathTight buffer coatingRip cord

�

�

�

�


Optical Apparatus

Optical Distribution Frame

�Convenient handling �19″Rack applied �Various sorts of cable can be applied

Feature

�Long-range optical transmission network �Optical subscriber network�Optical CATV network �Optical LAN system

Application

Specification

Item ODF-36C ODF-48C ODF-144C

483×380×44

12/24/36 F (SC type)

12/24 F (SC type)

Size (㎜ )

Number of Access Mounting

Adapter type

Access form

Outer diameter (㎜ )

Color

Material quality

48 F

483×310×222

SC, FC, ST, LC

Fusion, Mechanical

8∅ ~32∅

Beige, Silver Gray

AL, SPCC

200~500

14 F

ODF-36C ODF-48C ODF-144C

Rack


Optical Apparatus

Fiber Optic Terminating Boxes

�Low cost �Safe connector protection and storage�Excellent durability�Convenient usability

Feature

�Optical subscriber network �Optical LAN system�Long-range optical transmission network

Application

Specification

Construction

Excess length

support plate

Excess length plate

Adapter blanket

Jumper code acceptance

Optical jumper code

withdrawal

Support line clamp

Cable lead-in

Item ODF-36C ODF-144C

330×220×80

5.8

24 cores

380×260×110

6.4

48 cores

3 (Cable lead-in : 2, optical jumper code lead-in : 1)

∅ 22

1

SC, FC, ST, LC

Steel with Iaminated coating, stainless steel (optional)

Indoor wall adhesion

Size (㎜ )

Weight (㎏ )

Number of lead-in entrance

Maximum outer diameter (㎜ )

Number of excess length plate

Number of access mounting

Adapter type

Material quality of enclosure

Application


Optical Apparatus

Fiber Optic Emergency Repairing Systems

�Excellent durability �Convenient application �Standard fiber count : 1~12 �Actualization of lightweight with optimum structure�Excellent high-strength and bending performance �Space saving design�Convenient mobility �Compatible with various connectors

Feature

�Emergency restoration �Temporary installation of communication system �Military operational communication system

Application

Construction


� Center tensile line FRP or aramid yarn

� Reinforcer Aramid yarn

� Tape Plastic tape

� Sheath Polyethylene, PVC or polyurethane

�

�

�

�

�


Cable Specification

Specification

Optical cable

Reel

Reel carrier

-

-

-

≤Below 15 ㎏ /Set

≤Below 10 ㎏ /Set

≤Below 5 ㎏ /Set

In case of 6 cores

Winding device of optical cable

Optical cable transportation and storage device

Recommended 500m

1 Set

1 Set

Item Quantity Weight WeightApplication and function

Mechanical & Environment Characteristic

Φ0.9㎜ PVC or acrylate coating core wire

FC, SC, ST Type

Aluminum or special alloy

5~25

5~8

10~30

Content

-

-

㎏ f

㎜

㎏ /㎞

-

Unit

Types of optical fiber

Connector

Outer diameter

Cable weight

Transportationequipment

Material quality

Weight

Item

Over 100

3

20 Times of Cable External Diameter

10 Times of Cable External Diameter

-40~+70

100~1000

Content

㎏ f

㎏ /㎞

㎜

℃

m

Unit


Crush resistance


Delivery length

MinimumCurvature dia.

Dynamic

Static

Item

36 _ Optical Cables

Optical Cables _ 37

TAIHAN’s OPGW (Optical Fiber Ground Wire) series provide entirely new form of telecommunication line that is made

up of a ground wire for aerial power lines which contain optical fibers encased in an aluminum covered stainless steel

tube, aluminum tube or stainless steel tube. An OPGW combines a ground wire for shielding overhead power trans-

mission lines together with optical fibers for transmission of communication signals. The OPGW has been designed to

meet either the “Electrical”or the “Mechanical”equivalent of conventional ground wire such as resistance of strong

winds, lightning and short circuit current.

OPGW

ContentsOptical Fiber Ground WireStainless Steel Loose Tube Type OPGW 38Non-metallic Loose Tube Type OPGW 39Central Stainless Steel Loose Tube Type OPGW 40Al Covered Stainless Steel Loose Tube Type OPGW 41

38 _ Optical Fiber Ground Wire

Optical Fiber Ground Wire

Stainless Steel Loose Tube Type OPGW

�Standard 6 to 144 fiber count �Power line protection�Excellent crush resistance performance �Good resistance to strong winds, lightning and short circuit current�Maintenance data information system

Feature

�ITU-T G. 650, 651, 652, 655, IEEE 1138, IEC 60793, IEC 60794

Application Specification

Cable Specification

Identification

of Optical Fiber

Sectional area ㎟

No. of fibers

Construction

�Central AS wire

�Steel tube

�1 st Layer AS wire

�2 nd Layer Al alloy

Outer diameter

Unit weight

Min. tensile load

Short circuit current capacity

Modulus of elasticity

Linear expansion coefficient

Max. allowable temperature

AS wire

Al alloy

Item Unit Specifications


� Filling compound Jelly compound� Steel tube Stainless steel tube � AS wire or Al alloy Aluminum clad steel wire or Aluminum alloy wire� AS wire or Al alloy Aluminum clad steel wire or Aluminum alloy wire

Construction

�

�

�

�

�

24 Core 48 Core

※ AS Wire : Aluminum clad steel wire

Core

No./㎜

㎜

㎏ /㎞

㎏ f

kA2s

㎏ f/㎟

/℃

℃

24

48

12

1/2.25

1/2.20

5/2.25

12/2.25

11.3

300

4200

39

9400

17.2×10-6

200

44

88

24

1/3.05

1/3.00

5/3.05

12/3.05

15.3

550

7800

130

9400

17.2×10-6

200

54

109

36

1/3.40

1/3.35

5/3.40

12/3.40

17.0

680

9700

200

9400

17.2×10-6

200

63

125

48

1/3.65

1/3.60

5/3.65

12/3.65

18.3

780

11200

270

9400

17.2×10-6

200

52

125

96

1/3.65

1/3.60

4/3.65

12/3.65

18.3

740

10000

245

9100

17.7×10-6

200

1

2

3

4

5

6

7

8

9

10

11

12

Blue

Orange

Green

Brown

Slate

White

Red

Black

Yellow

Violet

Pink

Aqua

No. offiber

Color

Optical Fiber Ground Wire _ 39


Non-metallic Loose Tube Type OPGW

�Standard 6 to 48 fiber count �Excellent water resistance performance�Power line protection �Maintenance data information system �Good resistance to strong winds, lightning and short circuit current

Feature




� Loose tube Thermoplastic material (polybutylene terephthalate)� Central member Fiber reinforced plastic (FRP)� Filling compound Jelly compound� Wrapping tape Heat resistance tape� Al tube Aluminum tube� AS wire or Al alloy Aluminum clad steel wire or Al alloy wire

Construction

Cable Specification

Item Unit Specifications

12010070㎟

48

17.2

940

14500

155

13600

14.1 x 10-6

200

48

16.4

820

12500

125

13300

14.3 x 10-6

200

24

16.3

875

13500

130

13700

14.0 x 10-6

200

24

15.4

760

11700

105

13400

14.2 x 10-6

200

24

13.6

550

7880

66

12600

14.7 x 10-6

200

Core

㎜

㎏ /㎞

㎏ f

kA2s

㎏ f/㎟

/℃

℃

24 Core 48 Core

�

�

�

�

�

�

�

No./㎜Construction




1/8.7 OP+14/2.43 AS

1/8.7 OP+11/3.34 AS

1/9.7 OP+12/3.31 AS

1/8.7 OP+10/3.8 AS

1/9.7 OP+11/3.74 AS

Sectional area

No. of fibers


Outer diameter

Unit weight

Min. tensile load

Identification

of Optical Fiber

1

2

3

4

5

6

7

8

9

10

11

12

Blue

Orange

Green

Brown

Slate

White

Red

Black

Yellow

Violet

Pink

Aqua

No. offiber

Color

40 _ Optical Cables


Central Stainless Steel Loose Tube Type OPGW

�Standard 6 to 48 fiber count �Light weight and small diameter�Excellent crush resistance performance �Power line protection�Maintenance data information system �Good resistance to strong winds, lightning and short circuit current

Feature



Cable Specification


� Jelly compound Jelly compound� Color binder Polyester yarns � Stainless steel tube Stainless steel loose tube� AS wire or Al alloy Aluminum clad steel wire or Al alloy wire

Construction

�

�

�

�

�

※ AS Wire : Aluminum clad steel wire, SSLT : Stainless steel loose tube

Sectional area

No. of fibers

Construction

Outer diameter

Unit weight

Min. tensile load





Unit

㎟

Core

No./㎜

㎜

㎏ /㎞

㎏ f

kA2s

㎏ f/㎟

/℃

℃

Specifications

58

24

1/3.5 SSLT + 6/3.5 AS

10.5

410

7000

15

16500

13 × 10-6

200

68

36

1/3.8 SSLT + 6/3.8 AS

11.4

480

8000

21

16500

13 × 10-6

200

75

48

1/4.0 SSLT + 6/4.0 AS

12.0

530

9000

26

16500

13 × 10-6

200

Item

Optical Cables _ 41


Al Covered Stainless Steel Loose Tube Type OPGW

�Standard 6 to 48 fiber count �Excellent water resistance performance�Power line protection �Maintenance data information system �Good resistance to strong winds, lightning and short circuit current�Light weight and small diameter

Feature



Construction

�

�

�

�

�

Cable Specification


� Jelly compound Jelly compound� Stainless steel tube Stainless steel loose tube� Al tube Aluminum tube� AS wire or Al alloy Aluminum clad steel wire or Al alloy wire

※ AS Wire : Aluminum clad steel wire

Sectional area

No. of fibers

Construction

Outer diameter

Unit weight

Min. tensile load





Unit

㎟

Core

No./㎜

㎜

㎏ /㎞

㎏ f

kA2s

㎏ f/㎟

/℃

℃

Specifications

83

1/5.5 Al tube +

8/3.3 AS

12.1

520

8300

40

14800

13.4 × 10-6

200

68

1/5.5 Al tube +

9/2.75 AS

11.0

420

6500

28

14500

13.6 × 10-6

200

60

1/5.5 Al tube +

10/2.4 AS

10.3

365

5500

23

14200

13.8 × 10-6

200

105

1/6.2 Al tube +

8/3.75 AS

13.7

665

10700

64

15000

13.3 × 10-6

200

85

1/6.2 Al tube +9/3.1 AS

12.4

530

8250

44

14600

13.5 × 10-6

200

74

1/6.2 Al tube +

10/2.7 AS

11.6

450

6950

35

14400

13.7 × 10-6

200

Item

6 ~ 24 48

42 _ Optical Cables

Optical Cables _ 43

TAIHAN’s FTTH linking quality optical cables to the home is used for high-speed network up to 1Gbps. By adopting this sys-

tem, the ubiquitous world is being realized in home network, VoD, IP based HDTV, telemedicine, videophone, and high-speed

Internet that we have been dreaming of. We lead the next-generation broadband communication infrastructure with T-Way,

an optimal FTTH total solution based on GE-PON system, which covers from system design, installation, construction to

supervision.

FTTH

ContentsFTTHGE - PON based FTTH System 44FTTH Total Solution T-WAY 46Network Application (in Apartment) 46E -PON OLT System 47E -PON ONT System 48E -PON ONU System 48EMS (Element Management System) 49Types of Optical Fiber Cable 50TBF System 51TBF System 52Optical Splitter 53Optical Distribution Frame 54Field Assembling Connector 54Optical Termination Box 55Optical Splicing Box 56RN Tray (Remote Node) 57FTTx Wiring System 57

44 _ FTTH

GE - PON based FTTH System

TAIHAN′s FTTH system adopts GE-PON technology on Ethernet base. GE-PON system pro-vides maximum ten times faster speed than VDSL system and delivers easy installation andmaintenance. It also provides the most competitive price among various PON systems and ismost popular in Korean and Asian markets as well.

Coverged services providing broadcasting, high quality internet and VoIP.

PON : Passive optical network ONT : Optical network terminal

OLT : Optical line terminal ONU : Optical network unit

APPLICATION

CATV, Satellite

Triple P

RF Video

Internet

IP Video

Voice

V-OLT

EMS

PON

OLT

CATV/satellite signal, 1550㎚

24 E-PONinterfaces

1490㎚

1310㎚

WDM couple

FTTH

FTTH _ 45

[FTTP]

[FTTH]

Play Service

ONT

Voice

ONU

ONUUTP

FTTP : Fiber to the pole

FTTH : Fiber to the home

Optical splitter (1×16/32)

SMF 10~20㎞

1:32

SMF

Date

Video

r

46 _ FTTH

FTTH Total Solution T-WAY

Network Application (in Apartment)

TAIHAN provides the most proper solution for installing FTTH network in economical way, and also pro-vides the network consulting and engineering services for TPS (Broadcasting, Telephony and Internet).

1. Network planning and cost estimation 4. Technical consultation2. Site survey and detailed design 5. Consultation for BOT (built, operation3. Installation and test and transfer) business

Engineering services by TAIHAN are :

Informationacquisition

Customer satisfactionoptimal solution

Needsanalysis

Design

Integration

Operation

Management

Product selection

FTTH

FTTH

MDF of apartment

Configuration in Flat

Abbreviation

Co : Central office

OFC :Optical fiber cable

BTB : Building termination box

FTB : Floor termination box

S : Subscriber

POC : Passive optical component (splitter)

STB : Set top box

OFC

Patch cord

Outlet

UTP 5e

ONT

UTP 5e

IP STB

VolP phone

BTB

GbEMax.4

fromISP

E-PON(Max.24)

1:16 or 1:32

FTTH _ 47

E - PON OLT System

E-PON OLT system consists of Gigabit ethernet switch and GE-PON master, and is installed in either telecomoffice or control room of residential apartment. 4 ports of GbE interface are connected to ISP (internet serviceProvider) and 24 ports of E-PON interface are connected to total 768 ONT systems by point to multi-pointarchitecture. If V-OLT module is added, satellite and CATV broadcasting services can be provided.

Item ItemSpecification Specification

�Minimize the cable installation and maintenance cost bysupporting max. 32 branching off per port.

�Provide 1Gbps full-duplex speed per port with just 1 fiber�Provide broadcasting, IP telephony and internet services�Compliant to IEEE 802.3ah standard�Support SLA and DBA function that control flexibleup/down bandwidth per ONT.

TPS (Triple Play Service)

�Provide 12 slots for E-PON interface board�Provide maximum 24 ports of E-PON interface (2 ports per board)�Provide 4 ports of Gigabit ethernet interface for WAN and serverconnection

�Support 100 Mbps interface for IP-TV exclusive�Ethernet based packet forwarding�L2/L3 switching function�Support service priority by setting SLA and bandwidth per LLID �Efficient system monitoring and configuration through EMS

Feature

�High quality internet service �IP-TV service through internet�CATV or Satellite service by using Video-overlay module

Application

�Max. 28 Gbps switching capacity

�1000 base-Tx interface : 2 ports

�1000 base-Tx/Fx interface (SFP GBIC) : 2 ports

�Gigabit interface module : 1

�E-PON line interface module : 12

�Fan module : 1

�24 ports of E-PON interface (2 ports/module)

�EEE802.3 ah

- MPCP master/Slave function

- IEEE802.3 ah full-duplex MAC for each LLID

- IEEE 802.3 ah Link OAM protocol

�SLA per LLID

�Max. 64 LLIDs per E-PON interface

�IEEE 802.1p (priority)

�IEEE 802.1q (VLAN)

�IEEE 802.3 ad (link aggregation)

�IEEE 802.1d (STP)

Layer 3

Multicasting

QoS

Filtering

Management

Size(㎜ )

Capacity

NetworkManagement

Slot

E-PONInterface

E-PONFeatures

Layer 2

�Static routing

�Dynamic routing (OSPFv2, RIPv1/2)

�DHCP server/relay

�IGMPv1/2, PIM-SM

�IGMP snooping

�Packet classification/marking/remarking

�Congestion management

�SPQ, WRR

�Packet classification and queue allocation for L2/L3/L4 header

�DSCP/TOS and 802.1p support

�DHCP filtering

�NetBeui, NetBIOS, NBT filtering

�Limitation of MAC number per ONT�ONT operation and maintenance through OLT�Remote software upgrade�GUI based operation and maintenance through EMS

�440(W) x 260(H) x 320(D)

FTTH

48 _ FTTH

E - PON ONT System

E-PON ONT system consists of GE-PON slave and 4ports of 100Base-Tx Interface, and is installed atsubscriber premises. Since 1 port of 100Base-Txinterface is designed to process the high prioritypackets, IP-TV service may be much stably provid-ed, and remaining 15 ports of 100 Baxe-TX interfaceprovide high quality internet and data services.


�1 Gbps E-PON Interface : 1port

�IP-TV exclusive 100 Base-Tx Interface : 1 port

�100 Base-Tx Interface : 15 ports

�Satellite or CATV RF Interface (Optional)

�IEEE 802.1q (Mapping VLAN to LLID)

�Multiple LLID support and SLA function per LLID

�MAC management

Filtering

QoS

Management

Size(㎜ )

E-PON Interface

EthernetInterface

Layer 2

�DHCP filtering

�NetBeui, NetBIOS, NBT fitering

�Limiting the number of MAC

�4 queues support per LLID

�SNMP/EMS O & M support through OLT system

�Remote software upgrade

�178(W) x 42(H) x 185.5(D)

E -PON ONU System

TAIHAN’s E-PON system can be deployed to FTTP(Pole), FTTB(Building) and FTTZ(Zone) applications asper request of customer. This system supports 1 port of E-PON interface and 24 ports of 100Base-Txinterface, and provides the high quality multi-media services of Broadcasting, IP telephony and Internet.


�1 Gbps E-PON interface 1 port

�100 base-Tx interface 24 ports

�IEEE 802.1q (VLAN)

�IEEE 802.1p (Packet Priority)

�IEEE 802.1d (STP)

�IGMP Snooping

Filtering

QoS

Management

E-PON

EthernetInterface

Layer 2

Multicasting

�DHCP filtering

�NetBeui, NetBIOS, NBT fitering

�Limitation of MAC number

�Packet classification

�SPQ, WRR

�Marking / remarking

�Rate limiting per port (1M unit)

�ONT operation and maintenance through OLT

�Remote software upgrade

FTTH

FTTH

FTTH _ 49

EMS (Element Management System)

Requirements for EMS Hardware

By adopting element management system, network operator can easily manage the E-PON OLT and ONTsystem at remote site. EMS consists of EMS Manager as a server and EMS agent for communication withE-PON system. With this EMS system, unified network management is available.

�Provide SNMP interface�Web-based system management function�Easy and convenient GUI interface�Configuration management : addition, deletion and change for OLT and ONT interface�Fault management : real-time monitoring and history & statistics management for malfunction�Auto discovery function for system addition/deletion�Performance management : performance and critical value management for OLT/ONT/CPU �Protocol management : protocol management for TCP/IP�Operator management : record of addition, deletion, change and connection history

Feature

Network management NE Control / administration

Description Requirements

Pentium 4, 3GHz

1 GB

60 GB

Minimum SVGA 1024 x 768

Windows 2003 server

MS-SQL server

Processor

RAM

HDD

Monitor

O/S

Database

FTTH

50 _ FTTH

Types of Optical Fiber Cable

�Tight buffered optical fiber

�Aramid yarn

�Outer sheath

�Suspension wire

Round Type AerialDrop Cable

�Optical fiber

�Loose tube

�Aramid yarn

�Outer sheath

Central Loose Type Drop Cable


�Aramid yarn

�Outer sheath

Single Sheath Type Drop Cable


�Aramid yarn

�Inner sheath

�Aramid yarn

�Outer sheath

Double Sheath Type Drop Cable

�Tight buffered

optical fiber

�Aramid yarn

�Outer sheath

Single Unit HybridCable(SMF+MMF)


�Aramid yarn

�Central strength

member

�Rip cord

�Outer sheath

Multi Unit Hybrid Cable

�FRP

�Optical fiber

�Outer sheath

Flat type Indoor cable

�UTP cable pair

�Outer sheath

�Tight buffered

optical fiber

Optical/UTP Composite Cable(for FTTH)

▶ FTTH Drop Cable

▶ FTTH Indoor Cable

FTTH

FTTH _ 51

TBF System

Ripcord Acrylate coatingOptical Fiber(SMF, MMF)

8C 4C 2C 2C (Ripcord)

Air Blown Fiber Unit�The TAIHAN units are contained in a soft inner acrylate layer for cushions.�An outer harder layer protects the fibre from damage and a low friction layer.�It assists in improving blowing distance which is typically in excess of 1000m in a single direction.�It is available in lengths up to 6000 metres.

1.0 ㎜

0.8g/m

blue, orange

1.0 ㎜

0.8g/m

blue, orange, green,red

1.4 ㎜

1.5g/m

blue, orange, green,red, violet, grey, yellow,

brown

1.3 ㎜

1.55 g/m

blue, orange, green, red,violet, grey, yellow, brown,black, White, Pink, turquoise

Diameter

Weight

Fibre colors

2 Fibre 4 Fibre 8 Fibre 12 Fibre

Maximumattenuation

(dB/㎞)

Bandwidth(MHz.㎞)

WavelengthSinglemode(G.652b)

MM62.5/125

MM50/125

OM3 OM3ELow water peak(magnilight G.652b)

Tensile strength

Crush

Bend

Aged bend

Temperature

Cold test

Condensation test

Water immersion

Fibre breakout form unit

MechanicalInternational standard Test conditions Performance

Properties

Transmission Performane

IEC 60794-1-2-E1

IEC 60794-1-2-E3

IEC 60794-1-2-E11

BT CW 1500 pt 4

1W N (9.81 × mass of 1 ㎞ )

100N for 60 seconds

40 ㎜ (2 & 4f), 60 ㎜ (8f)

40 ㎜ (2 & 4f), 60 ㎜ (8f) at 60℃ for 1000 hrs

Pass. maximum fibrs strain = 0.4%Residual fibre strain = 0.05%. note 1, note 2

Pass. note 1, note 2


Pass. note 1

Environmental

IEC 60794-1-2-F1

BS EN 60068-2-1

IEC 60068-2-38

BT CW 1500 pt 4

BT CW 1500 pt 4

850 ㎚

1300/1310 ㎚

1383 ㎚

1550 ㎚

850 ㎚ minimum modal

850 ㎚ effective modal

1300/1310 ㎚

-

0.38

-

0.26

-

-

-

-

0.38

0.35

0.26

-

-

-

3.5

1.0

-

-

200

-

600

2.6(2f-3.2)

0.8(2f-1.2)

-

-

500

-

800

2.6(2f-3.2)

0.8(2f-1.2)

-

-

1500

2000

500

2.6(2f-3.2)

0.8(2f-1.2)

-

-

3500

4700

500

-10℃ to + 60℃ for 3 cycles

-20℃ for 96 hours

-10℃ to + 65℃ at 93%RH for 24 hrs ×10

20℃ ± 5℃ for 2000 hours

0℃, 20℃, 40℃, length 2m





Under 3 minutes(2 & 4f)Under 5 minutes(8f)

FTTH

Note1. no significant dam age Note2. no change in attenuation after test Note3. pass for singlemode = ±0.07 dB/km at 1310 nm and 1550 nm Note4. pass for multimode = ±0.25dB/km at 850 nm and 1300 nm

52 _ FTTH

TBF System

Gas seal connector

Tube connector

Tube sealing cap

Water blockingconnector

End cap

12-way

1

2

3

4

1 = Micro tube

2 = Aluminium layer

3 = Inner sheath

4 = Rip cord

7-way2-way1-way 4-way

Air Blown Tube Cable�Aluminium tape layer acts as a moisture barrier�Rapid dedicated customer connections using proven mechanical protection of HDPE�Low friction internal coating for maximum fibre blowing distance�Each tube accommodates one fibre unit(up to 12 fibres in unit)�Can be composed flexible tube routing

1-way

2-way

4-way

7-way

12-way

19-way

24-way

Way Type Outer Dia.(㎜) Band Tensile Crush Packing

Aluminium

swellable tape

metal free

5m/3.5m

12.8

12.8×17.8

19.9

22.8

28.1

32.8

37.9

192

192×266

298

342

422

492

568

1.1

1.6

2.3

2.9

4.0

5.2

6.5

2

2

2

2

2

2

2

2,000

Tube Connectors�Straght connector : Used for simple fit connection of 5 ㎜ to 5 ㎜ TBF tubing�Gas seal connector : used for gas sealing TBF tubing entering a customers premises and providing

a gas tight seal for tubes�Sealing cap : Used for gas sealing unused TBF tubing entering internal plant�Water blocking connector : Used for Water blocking TBF tubing entering underground external plant�End cap : Used for terminating unused TBF Tubing Within external plant

FTTH

FTTH _ 53

Optical Splitter

Size (LxWxT) [㎜ ]

Common port fiber

Distribution port fiber

Housing material

Sealing material

Common port fiber length (m)

Distribution port fiber length (m)

Fiber specification

Insertion loss (dB)

Loss uniformity (dB)

PDL (dB)

Return loss (dB)

Wavelength (㎚ )

Item1x4 1x8 1x16 1x32

40x4x4

250 ㎜

4F ribbon

≤7.6

≤0.8

≤0.3

≥55

40x4x4

250 ㎜

4F ribbonx2

≤11.0

≤1.2

≤0.3

≥55

50x5x4

250 ㎜

8F ribbonx2

≤14.0

≤1.4

≤0.4

≥55

50x7x4

250 ㎜

8F ribbonx4

≤17.8

≤2.0

≤0.4

≥55

Aluminum alloy or stainless steel

Silicon rubber

1.5

1.5

ITU-T G652

1260~1625

Specification

Fiber Color

Channel number Color

Blue

Orange

Green

Brown

State

White

Red

Black

1

3

5

7

9

11

13

15

2

4

6

8

10

12

14

16

17

19

21

23

25

27

29

31

18

20

22

24

26

28

30

32

FTTH

54 _ FTTH

Field assembling connector can be assembleddirectly on 250um or 900um size of optical fiber byimproving the conventional mechanical jointing method.

It’s work efficiency is largely improved as the assem-bling is carried out simply and rapidly at site withoutgrinding optical fiber in the field. Additional tool is notrequired and wedge inside connector packing isused for assembling.

Field Assembling Connector

Characteristic Types of fiber Wavelength (㎛) Avg. loss Max. loss

Insertion loss

Return loss

Single mode

Single mode

Multi mode (50/125)

Multi mode (62.5/125)

Single mode

Single mode

Multi mode (50/125)

1310

1550

1310

1310

1310

1550

1310

0.19dB

1.18dB

0.07dB

0.03dB

56.1dB

56.4dB

37.6dB

0.37 dB

0.34 dB

0.38 dB

0.21 dB

43.9 dB

44.5 dB

32.0 dB

FTTH

FTTH _ 55

Optical Termination Box

The optical termination box is used for inter-connecting of optical fiber purpose at subscriber premisesindoor or outside of the home. Featuring mechnical and environmental protection for both fiber and itscomponents, it provides a transition point between outside plant cable and patch cords in fiber optic net-work. It is designed with controls that maintain the fiber bend radius throughout the unit on the segregatedcustomer and provider sides. For convenient cable management, they provide termination, splicing andstorage functions for fiber optic cable systems.

Size (㎜ )

Weight (㎏ )

Inlet ports (㎜ )

Cable diameter (㎜ )

No. of splice trays

Splice capacity

Optical adapter

Material

ItemOTB-4 OTB-8 OTB-16 OTB-32

400x250x80 400x300x80

5.2 5.2 5.2 5.8

1/4 (drop) 1/8 (drop) 1/16 (drop) 1/32 (drop)

20/5 (drop) ㎜

1 up to 2

4F 8F 16F 32F

SC, LC

SPCC, SUS, AL

Specification

FTTH

56 _ FTTH

Optical Splicing Box

Optical splicing box is used to protect fiber optic splicing point from outside environment in various instal-lation conditions such as aerial, manholes, ducts and direct buried. It is specially designed for FTTH net-work and applicable to multi branching installation by using mid-plate which is for increasing core capac-ity and complying with the requirements in each point of network. The flat type gasket ensures reliablesealing performance by preventing air and water leak and the corn type sheath gasket is available toaccommodate varying size of cable diameter. The closure has high mechanical strength against any envi-ronmental conditions. With this closure, you can improve your network system to the higher level.

BS403A-SS Mid-plate BS403A-SS

Mid-plate BS403A-SD

Characteristic Types of fiber Wavelength (㎛) Avg. loss

Size (㎜ )

Weight (㎏ )

Inlet ports (Max)

Cable diameter

No.of splice trays

Tray capacity

Splice capacity

Splice method

Splice protector

Tension member

435 x 205 x113

2.8

4(32)

6� ~ 20�

4

24F ~ 48F

96F ~ 192F

Fusion, mechanical,connector

Heat shrinkable sleeve, ribbon protection sleeve, mechanical splice

Galvanized steel wire, FRP

435 x 205 x167

3.8

8(64)

6� ~ 20�

6

24F ~ 48F

144F ~ 288F

435 x 205 x221

4.8

12(96)

6� ~ 20�

8

24F ~ 48F

192F ~ 384F

�Increasing entry ports by using mid-plate�Proven water tightness by silicon rubber gasket�RN tray use for splitter, ribbon and loose tube fiber splicing�High mechanical strength against impact and compression�Ease of use for closure assembly

Feature

FTTH

FTTH _ 57

RN Tray (Remote Node)

FTTx Wiring System

Ribbon cable for heat shrinkable sleeve

Tray bottom

Loose cable for heat shrinkable sleeve

Splitter(1*32)

HIinge Fiber stopper

Splitter(1*32) Item Specification

Splice capacity

Splice method

Storage method

Bend radius

Use

20F (single stack fusion mechanical)

72, 64, 40F (Ribbon)

single/multi fusion, mechanical, splitter

sigle, dual

≥ 30 ㎜

Fiber to fiber, fiber to pigtail

FTTH

FTTH

APPENDIX

ContentsProduct Certificates 60System Certificates 61Definition of Terms 62Global Network 64

60 _ APPENDIX

Product Certificates

The outstanding quality of TAIHAN communication cables is verified by internationally accredited certification institutes.

Product certificates

Institute Certificate number Item Type Standard Issue date

UnderwritersLaboratories Inc.

(USA)

TelcordiaTechnologies

(US)

210100-E111385

240100-E111358

210600-E111358

220600-E111358

000111-E111358

000211-E111358

000311-E111358

000411-E111358

113000-E111358

-

Communicationscable

Communicationscable

Data cable

Data cable

Data cable

Data cable

Communicationscable

Communicationscable

Data cable

Optical fiber

CM, 24 AWG, 4/PR-Category 5

CM, 24 AWG, 4/PR Cable

CMR, Cm, and CMX, 24 AWG 25/PR UTP Cable-Category 3, 4, and 5

CMR, CM, and CMX, 24 AWG 25/PR UTP Cable

CMR 24 AWG UTP Category 5e Cable

CM and CMX 24 AWG UTP Category 5e Cable

CM & CMX Cables Employing FoamedPE Insulation & PVC Jacket

CMR Cables Employing Foamed PEInsulation & PVC Jacket

CM or CMX Cables Also Verified inaccordance with Category 6, NEMA

WC-66-1999 UL 444. NEMA WC-66-1999

Dispersion-Unshifted, Low Water Peak Single-mode Optical fiber

TIA/EIA 568A

UL 444

TIA/EIA 568A

UL 444

UL 444, ANSI/TIA/EIA-568A-5

UL 444, ANSI/TIA/EIA-568A-5

UL 444

UL 444

UL 444. NEMA WC-66-1999

-

2000.01.21

2000.01.24

2000.06.21

2000.06.22

2000.11.01

2000.11.02

2000.11.03

2000.11.04

2000.11.30

2007.10.30

APPENDIX _ 61

System Certificates

TAIHAN has been assessed and certified as meeting the requirements of ISO 14001, ISO 9001 and TL9000 which sets global standards for manufacturing process.

System certificates

62 _ APPENDIX

Definition of Terms

�Acrylate : A salt or ester of acrylic acid

�Aerial Cable : A cable suspended in the air on poles

or other overhead structures

�Aramid Fiber : A class of heat-resistant and strong

synthetic fiber

�AS Wire : Aluminum clad steel wire

�Attenuation : Power loss in an electrical system

�BcN : Broadband Convergence Network

�CaCO3 : Calcium Carbonate

�CATV : Community Antenna Television

�Cladding : something that covers or overlays.

Specifically, metal coating bonded to a metal core

�Coaxial Cable : A cable consisting of two conductors

with a common axis, separated by a dielectric

�Copolymer : A polymer derived from two (or more)

monomeric species, as opposed to a homopolymer

where only one monomer is used

�Core : A component or assembly of components over

which additional components (shield, sheath, etc.) are

applied

�CPU : Central Processing Unit

�CSA : Canadian Standards Association

�DBA : DataBase Administor

�Decibel (dB) : A unit to express differences of power level.

�DHCP : Dynamic Host Configuration Protocol, one of

the protocols in the TCP/IP networking suite

�Direct Buried Cable : A cable installed directly in the earth.

�Dry Type Cable : Dry Block material or hydroscopic

tape used as a water blacking agent in cables.

�DSCP : Differentiated Services Code Point, a field in the

header of IP packets for packet classification purposes.

�Duct : An underground or overhead tube through

which electrical conductors are pulled.

�DWDM : Dense Wavelength Division Multiplexing

�EMS : Electro Magnetic Susceptibility

�E-PON : Ethernet Passive Optical Network

�Ethernet : A computer network architecture consisting

of various specified local-area network protocols,

devices, and connection methods

�Fiber Optics : A lightwave or optical communications

systems in which electrical information is converted to

light energy, transmitted to another location through

optical fibers, and is there converted back into electrical

information.

�FRP : Fiber Reinforced Plastic

�FTTH : Fiber To The Home

�GBIC : Gigabit Interface Converter (1gigabit = one billion bits)

�GE-PON : Gigabit Ethernet Passive Optical Network

�GPS : Global Positioning System

�GUI : Graphical User Interface

�HDTV : High-Definition Television

�Hygroscopic : Taken up and retained under some

conditions of humidity and temperature.

�IEC : Independent Electrical Contractors Association

�IEEE : Institute of Electrical and Electronics Engineers

�IGMPv1/2 : Internet Group Management Protocol

�IPTV : Internet Protocol Television

�ISO : International Standards Organization

�ITU - T : International Telecommunication

Union - Telecommunication Standardization Sector

�KS : Korean (Industrial) Standards

�KT : Korea Telecom

�LAN : Local Area Network. Integration of computer and

communication systems that wire computers, peripheral

equipment and telephones together.

�LAP : Laminated Aluminum Polyethylene

�LLID : Logical Link Identifier

APPENDIX _ 63

�LSZH : Low Smoke Zero Halogen

�LWPF : Low Water Peak Fiber

�MAC : Media Access Control

�Mbps : Megabits per second (1megabit = one million bits)

�MFD : Mode-Field Diameter

�MMF : Multi Mode Fiber

�MPCP : Multi-Point Control Protocol

�Mylar : DuPont trademark for a polyester material used

in the form of a tape.

�NBT : A networking protocol that allows legacy

computer applications relying on the NetBIOS API to be

used on modern TCP/IP networks.

�NE : Network Element

�NetBeui : NetBIOS Extended User Interface

�NetBIOS : Network Basic Input/Output System

�NZDSF : Non Zero Dispersion Shifted Fiber

�OAM : Operations, Administration and Maintenance

�OLT : Optical Line Termination

�OSPFv2 : Open Shortest Path First Version 2

�OTB : Optical Termination Box

�PDL : Polarisation Dependent Loss

�PE : Polyethylene

�PIM-SM : Protocol Independent Multicast, Sparse-Mode

�Polyethylene : A thermoplastic material having the

chemical identity of polymerized ethylene.

�Polymer : A chemical compound with large molecules

made of many smaller molecules of the same kind.

�Polyurethane : A plastic material used especially to

make paint or substances which prevent water or heat

from passing through.

�PON : Passive Optical Network

�PVC : Poly-Vinyl Chloride

�QoS : Quality of Service

�RIPv1/2 : Routing Information Protocol

�RN : Remote Node

�SFP : Small Form-factor Pluggable

�SLA : Service Level Agreement

�SMF : Single Mode Fiber

�SNMP : Simple Network Management Protocol

�SPCC : Steel Plate Cold Commercial

�SPQ : Strict Priority Queuing

�Stalpeth : A cable sheath consisting of a corrugated

steel (ST) shield applied over a corrugated aluminum

(AL) shield and an outer polyethylene (PETH) jacket.

�SUS : Steel Use Stainless

�TCP/IP : Transmission Control Protocol-Internet Protocol

�Terephthalate : A dimethyl-ester that is a major

starting material for polyester fibers and coatings.

�Thermoplastic : Capable of softening or fusing when

heated and of hardening again when cooled.

�ToS : Type of Service

�UL : Underwriters Laboratories, a non-profit

independent organization, which operates a testing and

listing service for electrical and electronic materials and

equipment.

�UM : Micrometer (1um = 1,000㎚ )

�UV : Ultraviolet

�VAD : Vapour phase Axial Deposition

�VDSL : Very high-Data rate digital Subscriber Line

�VolP : Voice over Internet Protocol

�WDM : Wavelength Division Multiplexing

�WRR : Weighted Round Robin

�ZWPF : Zero Water Peak Fiber

Global Network

South Africa

M-TEC (Malesela Taihan Electric Cable(Pty)Ltd.)

Vereeniging 1930, Steel Road, Peacehaven

Vereeniging 1939, Gauteng, South Africa

TEL : +27-16-450-8333 FAX : + 27-16-450-8202

E-mail : [email protected]

Website : www.m-tec.co.za

D.R.Congo_ STANDARD TELECOM

158, Avenue de la democratie(Ex-Huilerie)

Commune de la Gombe, Kinshasa, D. R.CONGO

TEL : +01-511-0002 FAX : + 01-511-1100


Vietnam_TSC (Taihan Sacom Cable Company.,Ltd)

7th Floor, 71-73 Dien Bien Phu, phuong 15, Binh

Thanh District , Vietnam

TEL : +8461-351-4145 FAX : +8461-351-4211


Website : www.tsc.vn

Hong Kong_TGH (Taihan Global Holdings)

No.1808, 18/F,Tower 2,Admiralty Center,18 Harcourt

Road, Admiralty, Hong Kong

Mongolia_SKYTEL

3rd FL, Skytel Plaza Bldg, Chinggis khaan Avenue-9,

Ulaanbaatar-13, Mongolia

TEL : +976-1131-8488 FAX : +976-1131-8487

E-mail : [email protected] Website : www.skytel.mn

SKYNETWORKS

4th FL, Skytel Plaza Bldg, Chinggiskhan Avenue-9,

P.O.B 2033 Ulaanbaatar-211213 Mongolia

TEL : +976-9111-7463 FAX : +976-1131-8841

E-mail : [email protected] Website : www.skynetworks.mn

USA_Taihan USA (Taihan Electric USA., Ltd.)

LandMark Building, 99 Tulip Avenue, Suite#106,

Floral Park, NY 11001, USA

TEL : +1-516-355-5600 FAX : +1-516-355-5601


Canada_Taihan Global Canada Investment., Ltd.

Unit 610-4538 Kingsway, Burnaby, BC, Canada V5H 4T9

TEL : +604-438-7070 FAX : +604-438-7072


Overseas Corporates

64 _ APPENDIX

New York

Venezuela

EgyptPakistan

Saudi Arabia

Australia

Singapore

Kuala LumpurCambodia

Kuwait

Riyadh

Congo

South Africa

CanadaMongolia

Hong Kong

VietnamDubai

Branch office Subsidiary company Overseas business partner

Dubai Representative Office

Flat no. 705, Al Safa Tower, Sheikh Zayed Road,

P.O.Box 117561, Dubai, U.A.E

TEL : +971-4-331-7233 FAX : +971-4-331-7322


Riyadh Branch Office

Room No.726, AI Akariyah Shopping Center 2,

Olaya Road, P.O.Box 300201, Riyadh11372, Saudi Arabia

TEL : +966-1-419-0027 FAX : +966-1-419-0262


Kuwait Branch Office

Al-Adan, Block No. 6, Street No.14, House No.20,

State of Kuwait

TEL : +966-544-2456 FAX : +966-541-5344


Australia Branch Office

Suite 704, Level 7, 90 Mount Street, North Sydeny,

NSW 2060, Australia

TEL : +61-2-9460-3600 FAX : +61-2-9954-4354


Kuala Lumpur Branch Office

15th Floor, Kenanga International, JL. Sultan Ismail,

50250 Kuala Lumpur, Malaysia

TEL : +60-3-2161-8017 FAX : +60-3-2161-3628


Singapore Branch Office

150 Kampong Ampat #07-04 KA Center

Singapore 368324 Republic of Singapore

TEL : +65-6842-5069 FAX : +65-6842-5076


Cambodia Branch Office

Phlove Tomnupkopsrove, Phum Tropaingo Sangkat

Korkrokar, Khan Dankor, Phnom Pen, Cambodia

TEL : +855-23-357-114 FAX : +855-23-357-116


Qatar Branch Office

HBK Bldg. Room3-A, Fareeq Adul Aziz St.

TEL : +974 431 5014


Venezuela

Avenida Principal Los Chorros de mila Centro Epresarial

Villa Los Chorros Piso4 Oficina 404 Merida, Venezuela

TEL : +58 274 414 16 27


Saudi Arabia

Riyadh 11441 - P.O Box 1826 - Kingdom of Saudi Arabia

TEL : +996 1 4657777

Egypt

14 El Alfi Street - Down Town, El Sawra Building, Cairo, Egypt.

TEL : +202 25897585


Pakistan

56-A Shadman Colony-II, Canal Bank, Lahore-5400, Pakistan

TEL : +92 42 753 9798


Overseas Business Partner

APPENDIX _ 65

Offices & Plants

1. Head OfficeInsong Building, 194-15, Hoehyeon-dong 1-ga, Jung-gu, Seoul, Korea

Overseas Sales Team

TEL +82-2-316-9453 FAX +82-2-754-5481

2. Anyang Plant785, Gwanyang-dong, Dongan-gu, Anyang-si, Gyeonggi-do, Korea

Communication Cable Engineering Team

TEL +82-31-420-2351~2 FAX +82-31-420-9305

3. R&D Center785, Gwanyang-dong, Dongan-gu, Anyang-si, Gyeonggi-do, Korea

TEL : +82-31-420-9530 FAX +82-31-420-9350

4. Dangjin PLANT2-1 Seulhang-ri, Godae-myeon, Dangjin-gun,

Chungcheongnam-do, Korea

TEL : +82-41-359-9114 FAX +82-41-359-9116

Overseas Branch Office

1 2

3 4

www.taihan.com

* Specifications are subject to improvement or change without notice.

Please contact your local agent or TAIHAN to confirm the latest product information. TCE-0101-0811

Documents

Cables Telecom