CADENZA 3m CD‐C18 HPLC Columns

Up to 2000,000 Plates/m the same or more than UPLCtm Columns

A Revolution in Column Efficiency

Compare Cadenza CD-C18

Use any U/HPLC or LC-MS System You can get twice the throughput with the same or better resolution and you don’t need to buy an Ultra HPLC System. Use with any U/HPLC or LC‐MS System.

High Throughput Columns

Cadenza CD-C18 Phase Structure

Chromatographic Characteristics

Cadenza CD-C18 pH Tolerance

This data shows the pH stability using the Cadenza stationary phase. In aqueous eluants of acid and alkali with no organic solvent, we measured the rate of change in column durability after a constant period of exposure. Conven-tional ODS columns showed a huge change in column life with acidic and al-kali eluants. The cause of this is hydro-lytic degradation of the ODS and end‐capping functional groups. The pH used in the experiment was outside that toler-ated by conventional columns.

Cadenza CD‐C18, however, can handle these severe conditions. There is little change in retention or binding strength under these conditions. This is one of many points proving the power of polymeric end‐capping, the most superior stationery phase design technology. By using Cadenza CD‐C18, you will no longer face the traditional problems moving from low pH to high pH mobile phases, finding a new durability in your columns, discover the Cadenza ad-vantage.

+44 (0) 1420 549922 +44 (0) 1420 84254

OTHER FORMATS AVAILABLE FROM NANO TO PREP For more information or to place an order contact:

enquiries@arcsciences.com PO Box 275, ALTON, Hampshire, GU34 9FJ, United Kingdom

www.arcsciences.com

4.6mm ID, 3μm C18

CD001 Cadenza CD-C18 (30x4.6mm) 3um, ODS, end-capped CD002 Cadenza CD-C18 (50x4.6mm) 3um, ODS, end-capped

CD003 Cadenza CD-C18 (75x4.6mm) 3um, ODS, end-capped

CD004 Cadenza CD-C18 (100x4.6mm) 3um, ODS, end-capped CD005 Cadenza CD-C18 (150x4.6mm) 3um, ODS, end-capped CD006 Cadenza CD-C18 (250x4.6mm) 3um, ODS, end-capped CD007 Cadenza CD-C18 (500x4.6mm) 3um, ODS, end-capped

2mm ID, 3μm C18

CD029 Cadenza CD-C18 (20x2mm) 3um, ODS, end-capped

CD021 Cadenza CD-C18 (30x2mm) 3um, ODS, end-capped CD022 Cadenza CD-C18 (50x2mm) 3um, ODS, end-capped CD023 Cadenza CD-C18 (75x2mm) 3um, ODS, end-capped

CD024 Cadenza CD-C18 (100x2mm) 3um, ODS, end-capped CD025 Cadenza CD-C18 (150x2mm) 3um, ODS, end-capped CD026 Cadenza CD-C18 (250x2mm) 3um, ODS, end-capped

1mm ID, 3μm C18

CD011 Cadenza CD-C18 (30x1mm) 3um, ODS, end-capped

CD012 Cadenza CD-C18 (50x1mm) 3um, ODS, end-capped CD013 Cadenza CD-C18 (75x1mm) 3um, ODS, end-capped CD014 Cadenza CD-C18 (100x1mm) 3um, ODS, end-capped CD015 Cadenza CD-C18 (150x1mm) 3um, ODS, end-capped CD016 Cadenza CD-C18 (250x1mm) 3um, ODS, end-capped

ARC Sciences is the Exclusive Distributor of Imtakt products in the UK and Ireland. All trademarks are the property of their rightful owners

Ordering Information