CADLink CAD Interface system that connects your design information to. PLEX Online. ECN Manager Ties...
If you can't read please download the document
CADLink CAD Interface system that connects your design information to. PLEX Online. ECN Manager Ties your ERP Solution CAD information with your Engineering
CADLink CAD Interface system that connects your design
information to. PLEX Online. ECN Manager Ties your ERP Solution CAD
information with your Engineering change process.
Slide 3
QBuild began in 1995 with a simple AutoCAD ERP link. Today
CADLink integrates ERPs to leading CAD & PDM systems,
including: SolidWorks SolidWorks EPDM EPDM WindChill WindChill
AutoCAD AutoCAD NX NX Inventor Inventor Pro-E Pro-E Many more..
Many more..
Slide 4
L INKING P LEX AND CAD D ATA
Slide 5
Slide 6
o Zero software cost o Error Prone o Time Consuming o Small
engineering departments o Manufacturing of simple, repetitive
products
Slide 7
o Cheap and Cheerful o Slightly Faster than Brute Force o Often
requires massaging data in both CAD and PLEX o Small engineering
departments o Manufacturing of simple, repetitive products
Slide 8
Features o Direct link to: PLEX Online o Push PLEX description
onto the drawing o Push revision information to CAD and PLEX Online
o Update items, bills of material, and operations directly from
your CAD system o Tie critical dimensions to PLEX ERP BOM
quantities
Slide 9
Reduce non value-added engineering activities Double and triple
data entries are eliminated Reduce scrap Improve purchasing
accuracy Eliminate wrong build situations Improve on time shipments
Reduce engineering costs Improve accuracy from engineering to
production
Slide 10
8 Eng x 1 hour per day = 2000 hours BOM Data Entry 1 scrapped
part per year 12 late shipments per year Shop Floor ConfusionTotal
savings of 65,000 a year
Slide 11
Slide 12
Bill Of Material information is pulled from Models or Drawings
and displayed for the Engineer in this grid. Discrepancy between
CAD and PLEX Data are highlighted
Slide 13
Multi Level Bill Of Material
Slide 14
Shows the discrepancy between CAD and PLEX Data. Allows
engineering to select the correct one
Slide 15
Class Code table is taken directly from PLEX Online
Slide 16
Group Code table is taken directly from PLEX Online
Slide 17
PLEX Raw Material data is accessible directly from CADLink
Slide 18
PLEX Routing data created directly from within CADLink
Slide 19
Engineering can select the specific operation for each assembly
component
Slide 20
Bill of Material Changes Summary shows only the BOM changes
that will be made to PLEX
Slide 21
CAD Properties for the entire assembly conveniently summarized
in a single tab
Slide 22
CADLink can be configured to suit your requirements
Slide 23
BOM Data Entry 8 Eng X 1 hour per day = 2000 hours Cost
Justification Shop Floor Confusion 1 scrapped part per year 12 late
shipments per year Total Savings of $65,000 per year
Slide 24
Contact for Sales and Consulting: Geovanna Pazmino Applications
Engineer QBuild C O R P O R A T I O N 145 Renfrew Drive, Unit 140 |
Markham, ON L3R 9R6 | CANADA Phone +1 905 479 7811 EXT 224 Fax +1
905 479 2636 Email:
[email protected]@qbuildsoftware.comwww.qbuildsoftware.com