7/23/2019 CalDigit S2VR HD Quick Installation

http://slidepdf.com/reader/full/caldigit-s2vr-hd-quick-installation 1/2

 S2VR HD Quick Installation Sheet

Thank you for choosing CalDigit. Thisquick installation sheet is for referenceonly. Please check the detailed manual onthe provided CD, and also check ourwebsite at www.caldigit.com for updateddrivers/software. 

Product Specification:

Physical Dimensions:  26.30" L X 15" W X 23.25"H / 263.29mm L X 150mmW X 232.50mm H

Power:  Auto switching 100-240VAC 47-63 Hz with PFC /Inrush current 65/130A @11/220VAC (at 25° ambientcold start)

Operating temperature:  0-40 degrees C or 32° to104°F

Weight (net):  20.45lb / 9.28kg 

System Requirements: 

• PC or Mac with an available PCI-e or PCI-x slot 500 Mhz or faster**

• CD-ROM Drive

• 1GB of RAM minimum • Mac OS 10.3.9 or higher  

• Windows 2000/XP or higher  

**Note: You may be able to install the S2VRinto an older Mac or PC, however the overallperformance will be slower than with newersystems. For uncompressed HD video editing,we recommend a Dual Core G5 with 1Ghzmachine running with 1GB of RAM or better.

Copyright © 2006, CalDigit, Inc. All rights reservedS2VR Duo S2VR HD, S2VR Pro, CalDigit name and logo are registered trademarks of CalDigit Inc.

All other trademarks are the property of t heir respective holders. 

Package Contents

• S2VR HD

• 5 Hard drive in tray module

•

FASTA-4e HBA or FASTA-4x HBAdepending on model. (Host Card) 

• e-SATA Cable

• Quick Installation sheet

• Driver CD & Manual

• Power Cord

S2VR Interface:

Host Card Driver Installation:

1. Turn Computer On.2. Insert CD in CD-ROM drive.3. Open CD, then open file CalDigit FASTA-

4.pkg by double clicking on it 4. Introduction Screen, CLICK Continue 

5. Select OS hard drive as the Destination.

6. Finishing Installation, CLICK Continue.

7. Verify System Profiler

7/23/2019 CalDigit S2VR HD Quick Installation

http://slidepdf.com/reader/full/caldigit-s2vr-hd-quick-installation 2/2

Install S2VR Manager:

1. Double CLICK the application on theprovided CD, CalDigit S2VR v1.01.

2. Introduction Screen, CLICK Continue. 

3. Select OS hard drive as the Destination.

4. Installation Successful, CLICK Close.

5. Directory: OS drive > Applications >Utilities > CalDigit S2VR > S2VR Manager  

6. Drag S2VR to the Launcher.

Configuring S2VR Manager:

• S2VR Manager limits configuration accesswith a password prompt. (Default: admin) 

• Go to “ Management Tab” setuppassword, Voice & E-mail notifi cation.

• New password must be 5 or more characters.

• Click the “Enable Voice notif ication” box toactive the S2VR Manager voice notification.

• Click the “Enable Email notification” box andconfigure its settings to active S2VR Manager e-mail notification. 

Configuring RAID setting:

1. Click on “Configure RAID”.2. Select and click “ Create New RAID” . 

3. Click IGNORE on the Disk Insertion msg.

4. Go to OS Disk Utility, select S2VR HDand create Partition or RAID

• CONGRATULATIONS!

Your S2VR HD is ready to use! Thank you for your

purchase. Please visit us at www.caldigit.com forupdated drivers and information on new CalDigitproducts.