t

Manufacturing International ‘90

35th International SAMPE Symposium & Exhibition

International Conference on Adhesion and Surface Analysis

JEC ‘90

New Materials and their Applications

Materials Research Society Spring meeting

28th International MATADOR conference

CADCOMP ‘90

The Materials Show: properties, processes and joining technologies

Aeromat ‘90: Advanced aerospace materials/processes conference and exposition

1 Ith International SAMPE European Chapter conference 1990

T@ooIing for Composites ‘90 conference & exposition

5th Technical Conference on Composite Materials

Mat Tech ‘90: First European East-West symposium on materials and processes with high industrial potential

Europlast ‘90

Fifth Japan-United States Conference on Composite Materials

Speciality Polymers ‘90

Advanced Composites in Emerging Technologies

25-28 March 1990 Atlanta, GA, USA

2-5 April 1990 Anaheim, CA, USA

3-5 April 1990 Loughborough, UK

4-6 April 1990 Paris, France

lo-12 April 1990 Coventry, UK

16-20 April 1990 San Francisco, CA, USA

18- I9 April 1990 Manchester, UK

25-27 April 1990 Brussels, Belgium

15-17 May 1990 Wembley, UK

21-24 May 199@ Long Beach, CA, USA

29-31 May 1990 Basel, Switzerland

5-7 June 1990 Anaheim, CA, USA

lo-13 June 1990 East Lansing, Ml, USA

lo- 16 June 1990 Helsinki, Finland

11-16 June 1990 Paris, France

24-27 June 1990 Tama-City, Japan

S-10 August 1990 Baltimore, MD, USA

20-24 August 1990 Patras, Greece

Dr Carl Zorowski, Conference Chairman MI ‘90, Integrated Manufacturing Systems, The American Society of Mechanical Engineers, 345 East 47 Street, New York NY 10017. USA. Tel: (212) 705 7234

Marge Smith, Business Director, SAMPE, PO Box 2459, Covina, CA 91722, USA. Tel: (818) 331 0616; Fax: (818) 332 8929; Telex: 510 600 4889

Dr D.M. Brewis/Dr I. Sutherland, University of Technology (LCL) Loughborough, Leicestershire LEI 1 3TF. UK. Tel: (0509) 263171; Fax: (G3) 231983; Telex: 34319

Centre de Promotion des Composites, 65 rue de Prony F 75854 Paris Ctdex 17 France. Tel: (I) 47 63 12 59; Fax: (1) 47 63 57 39; Telex: INPLAST 641 636 F

The Meetings Office, The Institute of Physics, 47 Belgrave Square, London SWlX SQX, UK. Tel: (01) 235 6111; Fax: (01) 259 6002; Telex: 918453

Materials Research Society, 9800 McKnight Road, Suite 327, Pittsburgh, PA 15237, USA

Professor B.J. Davies, Manufacturing and Machine Tools Engineering Division, University of Manchester Institute of Science and Technology, PO Box 88, Sackville Street, Manchester M60 lQD, UK

CADCOMP ‘90, c/o MS M. Bourlau, VUB-TW (KB), Pleinlaan 2, B-1050 Brussels, Belgium. Tel: 32 (0)2 6412922; Fax: 32 (0)2 6412928; Telex: 61051 VUBCO-B

Mark Steel, Exhibition Manager, Oriel House, 26 The Quadrant, Richmond, TW9 IDL, UK

Technical Department Marketing, ASM International, Metals Park, OH 44073, USA

11th International SAMPE Conference 1990, PO Box 141, CH-4007 Basel, Switzerland. Tel: (61) 696 8306; Fax: (61) 696 7082; Telex: 96299 I

Society of Manufacturing Engineers, Expositions Division, SME Drive, PO Box 930, Dearborn, MI 48121-0930, USA. Tel: (313) 271 0777

Dr Lawrence T. Drzal, Composite Materials & Structures Center, BlOO Research Complex, Michigan State University, East Lansing, MI 48824- 1326. USA

Project Manager Pentti Attila, Teknolink Oy, Hietalahdenkatu ZB, SF-00180, Helsinki, Finland. Tel: (358) 0680 1505; Fax: (358) 0680 1599; Telex: 123456 INTAG SF

Press Office, AB3C - Annie BLIN, 29 rue du Fg Poissonniere 75009 Paris, France. Tel: (33-l) 48 24 08 97

Mr Kenneth L. Reifsnider, Fifth Japan-U.S. Conference on Composite Materials, Virginia Polytechnic Institute and State University, 120 Patton Hall Blacksburg, VA 24061, USA

Mrs W. Harvey, Polymer, Butterworth Scientific Ltd. PO Box 63, Westbury House, Bury Street, Guildford, GU2 5BH. UK

S.A. Paipetis, Comp ‘90 Symposium, PO Box 1134,261 10 Patras, Greece

Composites Manufacturing March 1990 61

3rd Conference of European Rheologists and the Golden Jubilee Meeting

ICAS 90

Adhesion ‘90

Advanced Ceramics and PM Materials Processing

6th Annual ASM,IESD Advanced Composites Conference and Exposition

ECCM-4

6th Annual ASMjESD Advanced Composites

Fabricating Composites ‘90 conference & exposition

Ausplas ‘90

Surfaces and Interfaces

Congress 1990

Compex’90

22nd International SAMPE Technical Conference

Interplas 90

Euromech Colloquium 269

Composites in Manufacturing 10 conference & exposition

JEC 91

36th International SAMPE symposium and exhibition

12th International SAMPE Europe conference 1991

Plast ‘91

The Eighth International Conference on Composite Materials (ICCM/VIlI)

IPCM 91: Interracial Phenomena in Composite Materials 91

23rd International SAMPE Technical Conference

62

3-7 September 1990 Edinburgh. Scotland

9-14 September 1990 Stockholm, Sweden

lo- 12 September 1990 Cambridge, UK

23-25 September 1990 Hiimeenlinaa, Finland

24-27 September 1990 Dearborn, MI, USA

25-28 September 1990 Stuttgart. FRG

8-11 October 1990 Detroit, Ml, USA

8-11 October 1990 Arlington, TX, USA

lo-23 October 1990 Melbourne, Australia

23-24 October 1990 Birmingham. UK

29-31 October 1990 Manchester, UK

29-31 October 1990 Manchester, UK

6-8 November 1990 Boston, MA, USA

19-23 November 1990 Birmingham, UK

3-6 December 1990 Saint-Etienne. France

7-10 January 1991 Anaheim, CA, USA

3-5 April 1991 Paris, France

15-18 April 1991 San Diego, CA, USA

28-30 May 1991 Maastricht, The Netherlands

6-11 May 1991 Milan, Italy

15-19 July 1991 Honoluhc, Hawaii

17-19 September 1991 Leuven, Belgium

22-24 October 1991 New York, N L USA

C.J.S. Petrie. Department of Engineering Mathematics. University of Newcastle-upon-Tyne, Newcastle-upon-Tyne, NE1 7RU, UK

17th ICAS Congress, Stockholm Convention Bureau. PO Box 691 lS-10239 Stockholm. Sweden

Diane Varley. The Plastics and Rubber institute, 1 I Hobart Place, London SWIW OHL. UK. Tel: (01) 245 9555: Fax: (01) 823 1379: Telex: 915719 PRIUK G

EAM - Institute, Conference Co-ordinator Henry Sajo, Reumantie 4. 18100 Heinola. Finland. Tel: 358 10 57062: Fax: 358 10 57161

Technical Division, ASM International, Metals Park. OH 44073, USA. Tel: (216) 338 5151; Fax: (216~ 338 4634; Telex: 98 0619 ASMINT

Eurocomposites and New Materials Codemac - Comite d’Expansion Aquitaine, 2 place de la Bourse, 33076 Bordeaux Cedes. France. Tel: 56 52 65 47; Fax: 56 44 32 69; Telex: 572 651 F

Member Activities Marketing, ASM International. Materials Park, OH 44073, USA

Society of Manufacturing Engineers, Expositions Division, SME Drive, PO Box 930, Dearborn. MI 48121-0930. USA. Tel: (313) 271 0777

Ausplas ‘90, 193 Rouse Street, Port Melbourne, 3207 VIC, Australia

Dr R. Morrell, Division of Materials Applications, Building 13, National Physical Laboratory, Teddington, Middlesex TWll OLW. UK

British Plastics Federation, 5 Belgrave Square, London. SWlX 8PD, UK

Interbuild Exhibitions Ltd. 11 Manchester Square, London WlM 5AB. UK. Tel: 01 486 1951; Fax: 01 486 8773; Telex: 24591 MONTEX G

Marge Smith, Business Director, SAMPE, PO Box 2459. Covina. CA 91722, USA. Tel: (818) 331 0616; Fax: (818) 332 8929; Telex: 5 10 600 4889

Mr John Green, Exhibition Manager, Industrial and Trade Fairs Limited, RadclifIe House, Blenheim Court, Solihull. West Midlands, UK. Tel: (021) 705 6707; Fax: (021) 705 4380; Telex: 337073 ITFG

Conference Secretariat, A. Voutrin, Dkpartement Micanique et Mattriaux, Ecole des Mines de Saint Etienne. 158. tours Fouriel, 42023 Saint-Etienne Cedex 2, France

Society of Manufacturing Engineers, Expositions Division, SME Drive. PO Box 930, Dearborn, MI 48121-0930, USA. Tel: (313) 271 0777

CPC, 65 rue de Prony F 75854 Paris Cedex 17 France. Tel: (1) 47 63 12 59; Fax: (1) 47 63 57 39; Telex: INPLAST 641 636 F

Marge Smith, Business Director, SAMPE, PO Box 2459, Covina, CA 91722, USA. Tel: (818) 331 0616: Fax: (818) 332 8929; Telex: 5 10 600 4889

12th International SAMPE EUROPE Conference 1991, c/o MECC Organ. Dept. SAMPE ‘91. PO Box 1630, NL-6201 BP Maastricht. The Netherlands

Enliplast, Centro Commerciale Milanofiori, Palauo F2 F2 - 20090 Assago (MI) Italia. Tel: (02) 8241641; Fax: (02) 8255019 Telex: 341378 Asplas

Professors Stephen W. Tsai and George S. Springer, Department of Aeronautics and Astronautics, Stanford University, Stanford, CA 94305, USA

Janet Miles, Conference Organizer, Butterworth Scientific Limited, PO Box 63, Westbury House, Bury Street, Guildford GU2 SBH, Surrey, UK. Tel: (0483) 300966; Fax: (0483) 301563; Telex: 859556 SCITEC G

Marge Smith, Business Director, SAMPE, PO Box 2459, Covina, CA 91722, USA. Tel: (818) 331 0616; Fax: (818) 332 8929; Telex: 510 600 4889

Composites Manufacturing March 1990

SHORT COURSES

Composites: an introduction to tibre reinforced plastics

Resin transfer moulding

Pultrusion technology clinic

Working with COSHH: training course

Introduction to fibre-reinforced composites

Pultrusion, pulwinding and pullforming processes

Resin transfer moulding II (Industrial workshop)

Machining composites clinic

Designing components from composite materials

Adhesion and adhesives

Composites: design and manufacture of libre reinforced plastics

Composite materials technology: mechanics, design & manufacture

Fibre reinforced composite materials

Filament winding clinic

Introduction to fabrication of fibre reinforced plastics

Polymers and composites in the automotive industry

Filament winding

Offshore composites (Industrial workshop)

Cure monitoring

2-6 April 1990 Sheljeld, UK

30 April-3 May 1990 Plymouth, UK

8-9 May 1990 Los Angeles, CA, USA

IS and I6 May 1990 Shropshire. CK

21-24 May 1990 London, UK

21-24 May 1990 Plymouth, UK

4-6 June 1990 P/ymouth, UK

13-14 June 1990 St Louis, MO, USA

20-22 June 1990 London, UK

25-28 June 1990 London, UK

2-6 July 1990 Shefield, UK

9-13 July 1990 Guildford, UK

30 July-3 August 1990 Cambridge. MA, USA

14-16 August 1990 Los Angeles, CA, USA

17-21 September 1990 Plymouth, L;K

18-20 September 1990 Loughborough. UK

5-8 November 1990 Plymourh, CK

20-22 November 1990 Plymouth, L’K

lo-12 December 1990 Plymouth, LK

Short Course Office. Department of Mechanical and Process Engineering, University of Sheffield, Mappin Street. Shetfield SI 3JD. UK. Tel: (0742) 768555 Extn 5169

Advanced Composites Manufacturing Centre (ACMC) - SC14. Department of Mechanical Engineering. Polytechnic South West. Plymouth PL4 8AA. UK. Tel: (0752) 232 653; Fax: (0752) 232 293; Telex: 45423 PSWAS G

Society of Manufacturing Engineers, Expositions Division. SME Drive, PO Box 930, Dearborn, MI 48121-0930. USA. Tel: (313) 271 0777

Christine Green. Training Coordinator, Rapra Technology Limited Shawbury. Shrewsbury. Shropshire SY4 4NR, UK. Tel: (0939) 250383; Fax: (0939) 251118; Telex: 35134

Mr F.L. Matthews, Centre for Composite Materials Imperial College. Prince Consort Road, London SW7 ZBY, UK. Tel: (01) 589 51 I I ext 4003; Fax: (01) 584 7596

ACMC (SCl5), Department of Mechanical Engineering, Polytechnic Southwest, Plymouth PL4 8AA. UK. Tel: (0752) 232653; Fax: (0752) 232293; Telex: 45423 PSWAS G

ACMC ( WlZ), Department of Mechanical Engineering. Polytechnic SouthWest, Plymouth PL4 8AA, UK. Tel: (0752) 232653: Fax: (0752) 232293; Telex: 45423 PSWAS G

Society of Manufacturing Engineers, Expositions Division, SME Drive. PO Box 930, Dearborn, MI 48121-0930. USA, Tel: (313) 271 0777

Mr F.L. Matthews, Centre for Composite Materials. Imperial College. Prince Consort Road, London SW7 ZBY, UK. Tel: (01) 589 51 I1 ext 4003; Fax: (01) 584 7596

Athena Barrett, London School of Polymer Technology. The Polytechnic of North London. Holloway Road, London N7 8DB, UK. Tel: (01) 607 2789 Ext 2248; Fax: (01) 700 4272; Telex: 25228 PNL G

Short Course ORice, Department of Mechanical and Process Engineering, University of Sheffield, Mappin Street, Sheffield Sl 3JD. UK. Tel: (0742) 768555 Extn 5169

Miss Rachael Alexander, Continuing Education Office. University of Surrey, Guildford, Surrey, GU? 5XH, UK. Tel: (0483) 509377; Fax: (0483) 300803; Telex: 895331

Frederick J. McGarry, Professor of Polymer Engineering, Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, USA.

Society of Manufacturing Engineers. Expositions Division, SME Drive. PO Box 930. Dearborn, MI 48121-0930, USA. Tel: (313) 271 0777

ACMC (SC16). Department of Mechanical Engineering. Polytechnic Southwest, Plymouth PL4 8AA. UK. Tel: (0752) 232653: Fax: (0752) 232293; Telex: 45423 PSWAS G

Mrs Pat West, IPTME. Loughborough University. Loughborough LEI I 3TU. UK. Tel: (0509) 223340; Fax: (0509) 610813; Telex: 34319

ACMC (SC18). Department of Mechanical Engineering. Polytechnic Southwest, Plymouth PL4 8AA. UK. Tel: (0752) 232653; Fax: (0752) 232293; Telex: 45423 PSWAS G

ACMC (W13). Department of Mechanical Engineering. Polytechnic Southwest. Plymouth PL4 8AA. UK. Tel: (0752) 232653; Fax: (0752) 232293; Telex: 45423 PSWAS G

ACMC (SC19). Department of Mechanical Engineering. Polytechnic SouthWest. Plymouth PL4 8AA. UK. Tel: 10752) 232653: Fax: (0752) 232293; Telex: 45423 PSWAS G

Composites Manufacturing March 1990 63