Call Station

7/26/2019 Call Station

1/16

www.commend.com

1 2

SIP-WS 200VSIP-WS 210V

Datasheet Version 1.0/0711 |Errors and omissions excepted |Products may change in the interest of technical improvements without notice. P 1|16

DATASHEET

Full Duplex capable, vandal resistant SIP stations de-

signed for areas with high requirements on safety. The

stations are connected directly to the Ethernet (LAN/

WAN) and in this manner are connected to a compa-

tible SIP Server via the IP-network. The built-in switch

with downlink function allows direct connection of an

additional IP-device (e.g. an IP-camera).

Besides high volume, the SIP stations provide a numer-

ous amount of further features: Pre-recorded audio can

be applied in a multi-purpose manner, e.g. as acoustic in-dication at line fault or as waiting information at call initia-

tion, a confgurable background noise canceller provides

a crystal clear communication in challenging situations.

Furthermore, the stations are perfectly suited for use as

door stations at entry- and gateways, due to integrated

relay outputs.

The 3 mm stainless steel front panel with tamper protec-

tion and special screws protects against vandalism. The

robust construction provides full protection against water,

dirt and dust protection class IP 65. Each button can be

allocated to a call number and the relevant label area can be

lled in individually. The red emergency call button is easilyvisible from a considerable distance and can be activated

quickly in emergency situations.

SIP Stations SIP-WS 200V / SIP-WS 210V

SIP-WS 201V (not pictured)1.

SIP station with one programmable, back-lit direct dialling

button, electret microphone with multifunction LED, loud-

speakers 2 x 8 , built-in amplier class D 2.5 W,2 relay

outputs (connection as make or break contact), protec-

tion classication IP 65 and IK 09, material stainless steel.

SIP-WS 202V (not pictured)

SIP station like SIP-WS 201V but with 2 programmable,

back-lit direct dialling buttons.

SIP-WS 203V

SIP station like SIP-WS 201V but with 3 programmable,

back-lit direct dialling buttons.

SIP-WS 211V (not pictured)2.

SIP station with one programmable, back-lit emergency call

button, electret microphone with multifunction LED, loud-

speakers 2 x 8 , built-in amplier class D 2.5 W,2 relay

outputs (connection as make or break contact), protec-

tion classication IP 65 and IK 08, material stainless steel.

SIP-WS 212V

SIP station like SIP-WS 211V but with an additional program-

mable, back-lit direct dialling button.


2/16

SIP-WS 200V / SIP-WS 210V

www.commend.comDatasheet Version 1.0/0711 |Errors and omissions excepted |Products may change in the interest of technical improvements without notice. P 2|16

DATASHEET

Technical Data Benefts

TECHNICAL DATAIP rating: IP 65

Mechanical impact resistance acc. EN 62262:

SIP-WS 200V: IK 09 SIP-WS 210V: IK 08

Front panel: stainless steel, 3 mm (0.12 in)

Operating temperature range: 20 C to 70 C (4 F to 158 F)

Storage temperature range: 20 C to 70 C (4 F to 158 F)

Relative humidity: up to 95% not condensing

Call button: 1 3 direct dialling buttons only SIP-WS 210V:large red emergency call button

Microphone: Omnidirectional electret microphone for

max. 7 m (23 ft) speaking distance

Loudspeaker: Special membrane type for optimal sound

quality, sound pressure: 85 dB/1 W/1 m (3.28 ft), 2 x 8

Amplier: Built-in amplier class D with 2.5 W

Status indication: red LED

Outputs: 2 SPDT (changeover) relay outputs

30 V / 1 A: 100,000 make-and-break cycles

RAM Memory: 32 MByte

Flash Memory: 8 MByte

DTMF Decoding: RFC 2833

SIP User Agent (UDP): RFC 3261

IP Protocol: IPv4, TCP, UDP, HTTP, RTP, RTCP DHCP, SNMPv2

Frequency range: 300 - 3,400 Hz

Connection: pluggable screw terminals

- IP Uplink/Downlink: shielded RJ 45 modular jacks

Cabling: min. Cat. 5

Power supply: 24 VDC 2 V, 500mA or PoE

Power consumption:

1.4 W idle

approx. 1.7 W at conversation (depending on volume)

PoE (Power over Ethernet): IEEE 802.3af standard

Power consumption of the terminal device:

Class 0 (0.44 W to 12.95 W)

Codecs: G.711 a-Law

G.711 -Law

prepared for G.722

Ethernet: 2 x 10/100 MBit/s (full/half Duplex)

Additional mounting material: ush mount kit WSFB 50V ush mount kit WSFB 50V FL surface mount kit WSSH 50V

rain protection roof WSRR 50V

Measurements: with ush mount kit WSFB 50V:W 164 mm (6.46 in), H 279 mm (10.98 in), D 14 mm (0.55 in)

with ush mount kit WSFB 50V FL:W 164 mm (6.46 in), H 279 mm (10.98 in), ush with plaster

with surface mount kit WSSH 50V:W 164 mm (6.46 in), H 279 mm (10.98 in), D 50 mm (1.97 in)

Weight incl. package: approx. 1500 g (3.3 lbs)

SYSTEM REQUIREMENTS

Compatible SIP Server (see page 5) or

G8-VOIPSERV (for additional features)

EXTENT OF SUPPLY

SIP station

Screws for mounting

Series SIP-WS 210V: 3 x paste-on label (SOS /

EMERGENCY / HELP) for emergency call button

Short reference

BENEFITSVandal resistant

IP rating IP 65 and mechanical impact resistance up to IK 09

Very high volume

Full Duplex for natural, hands-free communication

SNMP for surveillance of the station

Using Pre-recorded audio as:

Waiting information at call initiation

Individual call tone for call initiation

Location message

Acoustic indication at line fault

Control of the 2 relays e.g. as door opener via

DTMF post-dial or

Web

Attendant contacts for various functions, e.g.

Additional signalisation while ringing, during a call or in case

of malfunction

Operation without Server possible

Congurable Acoustic Echo Canceller (AEC)

Congurable Background Noise Canceller

Adaptive jitter buffer

Complies with SIP standard for easy integration in every SIP

capable PBXes

Integrated webserver for conguration & rmware update

Adjustment of microphone sensitivity and volume

Flexible operation via Power over Ethernet or via external

power supply

3.4 kHz speech quality for optimum intelligibility and

compatibility

Increased system availability by redundant LAN infrastructure

The integrated data switch function enables the connection of

further IP devices, e.g. IP camera

Congurable Auto Answer Function

Instant boot (system boot within seconds)

Communication via IP-data networks no additional cabling

required

Congurable backlight


3/16



DATASHEET

Typical Applications

SIP

0 #*

SIP

0 #*

Telephone

Call Center

IP NETWORK

Server

EMERGENCY SYSTEMS AT HIGHWAYSA typical application for use of SIP stations are emergency systems at highways.

The SIP stations integrated in helppoints are connected to the appropriate SIP server and a call center over the IP network.

A possible line fault is indicated acoustically via pre-recorded audio and can be processed by the SIP Server.

SIP

0 #*

Telephone

IP NETWORK

Server

OPERATION AS DOOR STATION

Due to integrated relay outputs it is possible, to use the SIP stations as door stations (with door opener contacts) at entry- and gate-

ways. The door opener contacts can be controlled by means of DTMF post-dialling or via web.


4/16



DATASHEET

Typical Applications

SIP

0 #*

Telephone

IN SMALLER SYSTEMSDue to the open standard of the SIP protocol, the stations can be operated without server. Therewith, cost-efcient use of the stations

in smaller systems is enabled.


5/16



DATASHEET

Compatibility

COMPATIBILITY SIP PBXBasically the SIP stations can be used with any SIP server.

The following server types have been tested explicitly by Commend and therefore a proper functionality can be conrmed:

MANUFACTURER* TYPE VERSION

Digium Asterisk Version 1.2, 1.4, 1.6

CiscoCisco Call ManagerCisco Unied Communication Manager

Version 5 or higher

Nortel CS1000 Version 6

Innovaphone Virtual Appliance IPVA Version 9 nal

Alcatel OmniPCX Enterprise OXE

Siemens Hipath 4000 Version 5

3CX 3CX for Windows 3CX PhoneSystem 9

Starface Starface free Version 4.6.5.1

Aastra MX-ONE Version 4.1 SP 1

VOIP PROVIDER TYPE VERSION

Sipgate Sipgate.at, Sipgate.de December 2010

Vodafone Arcor Vodafone.de January 2011

blueSIP blueSIP.net May 2011

*The listed products and company names are brand names or registered trademarks of their respective owners.


6/16



DATASHEET

Installation

PRECAUTIONSWhen opening the stations ESD precautions must be observed.

The stations may only be opened by authorised service engineers.

CONNECTION

Attention:

It is mandatory to ensure a correct power supply of the SIP station: min. 22 VDC,max. 26 VDC

PoE has to be connected to the RJ 45 jack IP Uplink (see above).

Further IP devices can be connected to the RJ 45 jack IP Downlink (see above), like e.g. an IP camera.

But it is also possible to link up to 20 SIP-WS 2xxV in series via this ethernet interface.

Attention Use of PoE:

If multiple SIP-WS 2xxV are connected in series, then only the 1st device can be supplied with Power over

Ethernet. All other devices (connected in series) must be supplied separately by an external power supplyunit.

CONFIGURATION VIA WEBINTERFACE

Via the integrated webinterface , it is possible to congure optional direct dialling numbers for the buttonsof the SIP-WS 2xxV.

OUT 2

OUT 2

OUT 1

OUT 1

DC+

DC

IP Uplink+ PoE

Alternative

power supply

24 V DC 2 V

Slots for inserting

button labels

FactoryResetbutton

IP Downlink(e.g. IP-camera)


7/16



DATASHEET

Installation

160 (6.3)

140 (5.5)

275

(10.

84)

255

(10.

05)

4x

7

(0.28)

Front panel thickness: 3 (0.12)

MEASUREMENTS FRONT PANELMeasurements in mm (inch), not to scale!


8/16



DATASHEET

Installation Additional Mounting Material

MRMR

MR

12x Expansion openings (can be broken out) 21

150 (5.91)

135.6 (5.34)

82 (3.23)1 (0.04) 0.5

(0.02)45.5

(1.79)

15

(0.59)

(0.5

9)

265

(10.

44)

(0.

55)

15

250.

6

(9.

87)

(0.3)

4x

7.5

164 (6.46)

279

(10.

99)

14

MR .... Flush mount frame (metal)

with mounting frame (plastic)

Cutout for flush mount box:137 (0.45) x 252 (0.83)

197

(7.

76)

front flush with plaster

MEASUREMENTS FLUSH MOUNT BOX WSFB 50VMeasurements in mm (inch), not to scale!

EXTENT OF SUPPLY

Flush mount box plastic (incl. cavity wall claws & cover lid)

Mounting frame plastic (incl. mounting screws)

Flush mount frame metal & gasket

Cable xing brackets (incl. screws)

Short reference



9/16



DATASHEET

MOUNTING FLUSH MOUNT BOX WSFB 50V

5

1

3

4

2

1

1

2

3

4

6

6

5

..... Front panel (metal) with station electronics

MOUNTING

DIRECTION

..... Mounting frame (plastic)

..... Flush mount frame (metal)

..... Gasket

..... Flush mount box (plastic)

To corresponding expansion openingof

flush mount boxof e.g. WS expansion module

..... Connection spacer (with gaskets) for connecting two flush mount boxes andfor cable feed through

Illustrationfront panel

*

Screw front panel onto flush mount frame

Screw mounting frame together with the flush mount frame (metal) and the gasket onto the flush mount box

(screws in extent of supply)

If possible, then 2 connection spacers shall be used per expansion (at deppened openings, see above)

gasket

gasket

For cavity wall mounting or installation in a desk, the cavity wall claws have to be used.

(wall thickness: 5 mm to 30 mm / 0.19 in to 1.18 in)



10/16



DATASHEET

EXTENT OF SUPPLY

Flush mount box plastic with mount frame metal (incl. cover lid)


Short reference


(0.5

9)

15

12x Expansion openings (can be broken out) 21

164 (6.46)

279

(10.9

9)

251.

6

(9.8

8)

22(8.87)

53 (2.09)

136 (5.35)

front flush with plaster


MEASUREMENTS FLUSH MOUNT BOX WSFB 50V FLMeasurements in mm (inch), not to scale!


11/16



DATASHEET

1

2

1

2

..... Front panel (metal) with electronics and gasket

..... Flush mount box (plastic) with Flush mount frame (metal)

...this side up, mounting direction


*

Screw front panel onto flush mount frame

Install the flush mount box by moulding into plaster or concrete.Do not remove plaster cover until the flush mount box is mounted.

MOUNTING FLUSH MOUNT BOX WSFB 50V FL



12/16



DATASHEET

279

(10.

99)

200(

7.

88)

164 (6.46)

(0.87)

148 (5.83)

50 (1.97)

229

(9.

02)

114 (4.49)

4x 5 (0.2)

6x

22

218

(8.

58)

60 (2.36)

4x Mounting openings 6 (0.24)

MEASUREMENTS SURFACE MOUNT BOX WSSH 50VMeasurements in mm (inch), not to scale!


EXTENT OF SUPPLY

Surface mount box metal (incl. 6 x dummy plugs)

Plastic box

4 x IP 65 cable feed through

2 x sabotage plates (currently not applicable for SIP stations)

Wall mount kit (screws, dowels, gasket rings and washers)


Short reference



13/16



DATASHEET

31

2

4

2

1

4

3

2

..... Front panel (metal) with station electronics

..... Plastic box

Screw the front panel onto the surface mount box

Press the plastic box into the surface mount box


*

..... IP 65 cable feed through

..... Surface mount box (Metal)Mounting via wall mounting kit

(screws and dowels) in extent of supply

The cable feed through can be put into the plastic box

after breaking out the expansion openings

(installation cable feed through see picture to the right).

Snap in

Insert cable

Pull back tight

MOUNTING SURFACE MOUNT BOX WSSH 50VAttention:

The dummy plugs for the surface mount box (in extent of supply) can not be removed without opening the housing!



14/16



DATASHEET


164 (6.45) 80 (3.15)

foam strip, approx. 2 mm (0.08 in)

277

(10.

9)

MEASUREMENTS RAIN PROTECTION ROOF WSRR 50VMeasurements in mm (inch), not to scale!

EXTENT OF SUPPLY

Rain Protection Roof

Fixing screws

Short reference



15/16



DATASHEET


MOUNTING RAIN PROTECTION ROOF WSRR 50VNote:

The rain protection roof can be used for vandal resistant SIP stations in surface mount version and in ush mount version. Following

illustration shows the installation of the rain protection roof WSRR 50V to the surface mount kit WSSH 50V.

Remove the screws with which the station front panel is mounted

Afterwards, screw the rain protection roof with the station front panel onto the surface mount box or the ush mount

frame by using the xing screws in the extent of supply (see above).

Fixing screwsrequired for

WSRR 50V (in extent of supply)

Rain protection roof

WSRR 50V

Front panel (metal) with

station electronics

Example:

Surface mount kit WSSH 50V


16/16

SIP-WS 200V / SIP-WS 210VDATASHEET

AUSTRIA

SLOVENIA

RUSSIA

Commend sterreich GmbHTel. +43-1-715 30 79www.commend.at

CROATIA

SERBIA

BOSNIA-HERZEGOVINA

Commend Adria d.o.o.Tel. +385-1-369 11 23www.commend.hr

FRANCE Commend France S.A.S.Tel. +33-149 18 16 40

www.commend.fr

NETHERLANDS

BELGIUM

LUXEMBURG

Commend B.V.Tel. +31-76-200 01 00

www.commend.nl

ITALY Commend Italia S.R.L.Tel. +39-035-95 39 63www.commend.it

SWITZERLAND

LIECHTENSTEIN

Commend AGTel. +41-44-955 02 2 2www.commend.ch

Europe

SINGAPORE Commend Business Hub AsiaIsolectra Far East Pte. Ltd

Tel. +65-62 72-2371

www.commend.com.sg

CHINA Commend Business Hub ChinaIsolectra China

Tel. +86-21-52 13 19 28

www.commend.cn

Asia

USA

CANADA

LATIN AMERICA

Commend Inc.Tel. +1-201-529-2425www.commendusa.com

America

AUSTRALIA

NEW ZEALAND

Commend AustraliaTel. +61-3-9755-39 47www.commend.com.au

Oceania

ISRAEL Sberlophone LtdTel. + 972-4-834 10 32www.sberlophone.co.il

Middle East

Commend International GmbHTel. +43-66 2-85 62 25www.commend.com

Other countries

SWEDEN

NORWAY

FINLAND

DENMARK

ICELAND

JNT Sound System ABTel. +46-8-99 30 6 0www.jnt.se

GERMANY Schneider Intercom GmbHTel. + 49-211-88285-3 33

www.schneider-intercom.de

POLAND C&C Partners Telecom Sp.z o.o.Tel. +48-65-5 25 55 55

www.ccpartners.pl

UNITED KINGDOM

IRELAND

Commend UK LtdTel. +44-1279-87 20 20

www.commend.co.uk

SLOVAKIA

CZECH REPUBLIC

Commend Slovakia spol. s r.o.Tel. +421-2-58 10 10 40www.commend.sk

SPAIN

PORTUGAL

Commend Ibrica S.L.Tel. +34-91-395 24 98 (Madrid)

Tel. +34-93-567 76 79 (Barcelona)

www.commend.es

SOUTH AFRICA Commend Business Hub South AfricaEvolving Management Solutions (Pty) Ltd

Tel. +270-112-746 66 5

www.commend.co.za

ALGERIA

TUNISIA

MOROCCO

Commend France S.A.S.Tel. +33-149 18 16 40

www.commend.fr

Africa

COMMENDA Strong Network |Worldwide

Documents

Call Station