PRO-TECH-MA 2016

International scientific conference

PROGRESSIVE TECHNOLOGIES AND

MATERIALS IN MECHANICAL

ENGINEERING

Department of Materials Forming

and Processing

Call for Papers

n Progressive materials for engineering production,their properties, evaluation methods oftechnological workability;

n New observations from theory of technologicalprocesses of metal forming, welding, surfacetreatment, machining and plastic processing;

n Tribological aspects of technological processes;n Progressive mechanical engineering technologies;n Experimental, computational and simulation

methods in mechanical engineering technologies;n Tools and fixtures in engineering production;n Products and production designing;n Ecological aspects of mechanical engineering

technologies;n Automotive production.

n Micromechanics of materials.

TOPICS OF THE CONFERENCEDepartment of Materials Forming

and Processing

Rzeszow University of Technology

Department of Mechanical Technology

and Materials

Technical University of Kosice

Department of Computer Modelling

and Metal Forming Technologies

Lublin University of Technology

22th June - 24th June 2016, Bezmiechowa, POLAND

Department of Computer Modelling

and Metal Forming Technologies

Department of Mechanical Technology

and Materials

Special Sub-Conference Sections

MICROMECHANICS OF MATERIALS

POLAND

and

SPECIAL SUB-CONFERENCE SECTIONS

Feliks STACHOWICZ – general chair Rzeszow University of Technlogy, Poland

Zbigniew PATER - co-chair Lublin University of Technology, Poland

Emil SPIŠÁK - co-chair TU Košice, Slovak Republic

Marek BALAZINSKI Polytechnique Montréal, Canada

Róbert BIDULSKÝ TU Košice, Slovak Republic

Gabriel BOROWSKI Lublin University of Technology, Poland

Sergei BOSIAKOV Belarusian State University, Belarus

Janette BREZINOVÁ TU Košice, Slovak Republic

Grzegorz BUDZIK Rzeszow University of Technlogy, Poland

Leszek DEMKOWICZ University of Texas at Austin, USA

Victor EREMEEV Rzeszow University of Technlogy, Poland

Emil EVIN TU Košice, Slovak Republic

Milan FOREJT VUT Brno, Czech Republic

Andrzej GONTARZ Lublin University of Technology, Poland

Viliam HRNČIAR STU Bratislava, Slovak Republic

Waldemar KARWOWSKI University of Central Florida, USA

Tibor KVAČKAJ TU Košice, Slovak Republic

Valery KHARCHENKO National Academy of Sciences of Ukraine, Ukraine

Ľuboš KAŠČÁK TU Košice, Slovak Republic

Volodymyr KUSHCH Institute for Superhard Materials, Kiev, Ukraine

Stanisław KUT Rzeszow University of Technlogy, Poland

Ildikó MAŇKOVÁ TU Košice, Slovak Republic

Gennady MISHURIS Aberystwyth University, UK

Jacek MUCHA Rzeszow University of Technlogy, Poland

Anna PARADOWSKAAustralian Nuclear Science and TechnologyOrganisation, Australia

Yuri V. PETROV Saint Petersburg State University, Russia

Jozef PETERKA MTF Trnava, Slovak Republic

Pero RAOS Josip Juraj Strossmayer University of Osijek, Croatia

Andrzej SEWERYN Bialystok University of Technology, Poland

Igor SEVOSTIANOV New Mexico State University, USA

Jarosław SĘP Rzeszow University of Technlogy, Poland

Ján SLOTA TU Košice, Slovak Republic

Peter ŠUGÁR MTF Trnava, Slovak Republic

Pavol ŠVEC STU Bratislava, Slovak Republic

Tomasz TRZEPIECIŃSKI Rzeszow University of Technlogy, Poland

Lucjan WITEK Rzeszow University of Technlogy, Poland

Jacek Mucha – Committee co-chair Rzeszow University of Technlogy, PolandGrażyna Ryzińska - Secretary Rzeszow University of Technlogy, PolandĽuboš Kaščák TU Košice, Slovak RepublicGrzegorz Samołyk Lublin University of Technology, PolandIrena Nowotyńska Rzeszow University of Technlogy, PolandWaldemar Witkowski Rzeszow University of Technlogy, Poland

Fee includes:

- participation in sessions,- proceedings,- coffee breaks and refreshments,- gala dinner,- conference lunches,- chapter in monograph.

250 EUR conference participation and paper in the English language

150 EUR paper in the English language without conference participation

200 EUR conference participation for PhD students

REGISTRATION FEE

CONTACT ADDRESS

ORGANIZING COMMITTEE

Feliks STACHOWICZstafel@prz.edu.pl

All papers will be published in abstract form in conferenceproceedings.The papers selected by the ScientificCommittee will be published in the part 5 of themonographic series "Progressive Technologies andMaterials". Accepted papers (after reviews) will bepublished in the regular issue of the Scientific Letters ofRzeszow University of Technology “Mechanics” RUTMech.The Scientific Committee after the paper preliminaryreview will sent information about possibilities ofpublishing in journals. Papers written in English languagemay be published in:1. Advances in Science and Technology – Research Journal -ISSN 2299-8624;2. Acta Mechanica et Automatica - ISSN 2300-5319;3. Open Engineering - ISSN 2391-5439;4. Interdisciplinary Journal of Engineering Sciences - ISSN2300-5874;5. Przetworstwo tworzyw – polymer processing - ISSN1429-0472.

VENUE OF THE CONFERENCE

The conference will take place in the University Gliding Centre inBezmiechowa Gorna. More informations you can find on web sitehttp://aos-bezmiechowa.pl.

Address

University Gliding CentreBezmiechowa Górna 111

38-600 Lesko

SCIENTIFIC COMMITTEE OF THE CONFERENCE

http://www.prz.edu.pl/mech/konfer/Protechma2016/index.htm

More information about the conference is available on

Department od Materials Forming and ProcessingThe Faculty of Mechanical Engineering and AeronauticsRzeszow University of Technologyal. Powstańców Warszawy 835-959 RzeszówPolande-mail: protechma2016@prz.edu.pl

IMPORTANT DATES

1. Deadline for registration: April 25, 2016

2. Deadline for abstract: April 30, 2016

3. Deadline for paper submission: May 15, 2016

4. Payment of conference fee: May 20, 2016

5. Notification of paper acceptance: May 25, 2016

After the conference, the authors of selected papers will beasked to submit their work for reviews to publishing inindexed scientific journals (WoS).

CHAIR