C A P A B I L I T Y S T A T E M E N Ti d e a s d e s i g n e n g i n e e r i n g c o n s t r u c t i o n

Building Structure Building Strength

C A P A B I L I T Y S T A T E M E N T | 2 0 1 32

Our Visionidec will be known as an industry leader in design, fabrication and construction activities. We will be renowned for our quality, cost effectiveness, innovative approach and professional manner.

Our ValuesEthical standards.

Recognition and respect of all stakeholders.

Quality.

Trust & Loyalty.

Commitment & Passion.

Teamwork.

One stop shop service‘‘

‘‘

CA

PA

BIL

ITY

ST

AT

EM

EN

T |

20

15

3I D E C S O L U T I O N S P T Y L T D

Company Profileidec’s reputation for unrivalled outcomes is a consequence of more than twenty years of exceptional service to a wide variety of clients such as builders, individuals, corporate entities, community groups, etc.. Over this period we have amassed considerable experience and expertise in the design, fabrication and erection of steel structures both domestically and internationally.

Corporate idec began in 1990 as Big Country Buildings by partners Peter Gartshore and Ross Leggatt. Management has now shifted to a board of directors with Glenn Gibson as Chief Executive Officer. Glenn is an engineer by profession and comes with local and international experience.

Consolidating and maintaining growth, continuous staff training and staff integration are high on my agenda as we see the company forge ahead. Glenn Gibson (idec CEO).

The fundamental ethos of achieving as a team underpins the daily life at idec. Since it takes the effective working of every section to see a project through to a timely completion, an emphasis on working as a team is essential to the idec way. Staff at idec totals more than 100 and includes engineers, drafting personnel, project managers, pre-construction consultants, structural steel fabricators, blasters and spray painters, administration personnel, riggers and construction teams.

We are the only custom engineered building company in Australia that offers this ‘one stop shop’ service with our own people. Our inherent understanding of site specific construction principles, a resolute attitude demanding continual corporate and individual improvement, together with stringent workplace health and safety requirements (federally accredited) ensures that idec is ideally placed to meet all conditions required by government and non-government entities.

The capability to prepare the engineering design and workshop detail drawings in-house provides an extra level of control and streamlines communication between the builder, engineer and fabricator.

‘‘

‘‘

‘‘

‘‘

C A P A B I L I T Y S T A T E M E N T | 2 0 1 54

Licenses and Accreditations QBCC Licence: 707347

ISO 9001 Quality Assurance

AS/NZS 4801:2001 – Occupational Health and Safety Management Systems

ASI ESC Member – Sustainability in Steel Construction

Australian Government Building and Construction OH&S Accreditation Scheme

QLD Government prequalification (PQC) Registration No. 1905

Queensland Government Transport and Main Roads Fabrication and Bus Shelters accreditation

National Code of Practice for the Construction Industry compliant

Contact Detailsidec solutions Pty Ltd

58 Anton RdHemmant QLD 4174

Postal Address: PO Box 100Cannon Hill QLD 4170

Ph: 07 3908 9600Fx: 07 3908 9699

info@idec.com.auwww.idec.com.au

ABN: 15 082 559 920

ACN: 082 559 920

CA

PA

BIL

ITY

ST

AT

EM

EN

T |

20

15

5I D E C S O L U T I O N S P T Y L T D

QualityWe are accredited to ISO 9001 Quality System.

Continual improvement through the Quality Management System keeps idec’s focus upon the goal of sustained, yet ever increasing, quality.

From design through drafting, detailing, fabrication, protective coating and erection, our clients are confident in our ability to deliver a first class product.

SafetyWe are accredited to AS/NZS 4801:2001 – Occupational Health and Safety Management Systems.

Workplace health and safety is of critical importance in the planning, organisation and undertaking of idec’s operations.

It is the policy of idec to conduct its activities in such a way that the health, safety and well-being of all employees, sub-contractors and other stake holders are not in any way impaired or prejudiced as a result of works done within or for the organisation.

We are also accredited to the Australian Government Building and Construction OH&S Accreditation Scheme.

MANAgEMENT SYSTEMS

idec recognises that there is no task that is so important or so urgent that it

releases the company, its managers, employees or sub-contractors from

the responsibility to ensure a healthy and safe work environment.

‘‘ ‘‘

IN-HOUSE SERVICESDesign ServicesAll our design work is carried out in Australia and is fully compliant with all relevant Australian Standards.

Our qualified personnel can help develop your ideas and needs by preparing design documents such as:

• Structural engineering documentation for all types of structural steelwork.

• Supporting concrete (foundations, slab, tilt panels, etc).

• Structural engineering design and certification for building construction and approval.

• Built up plate (BUP) non-prismatic portal frames for wide clear spans.

Our engineering and drafting team also provide structural and civil engineering services in the following areas:

• Materials handling industry.• Cranes, hoists and lifting structures.• Communication towers.• Structural audit and reporting.• Mobile energy generation and

communications modules.

The latest software applications utilised in our design and drafting include:

• STAAD.Pro• TEDDS• AutoCad• Tekla Structures• Revit

C A P A B I L I T Y S T A T E M E N T | 2 0 1 56

Our in-house capability enables the best integration of program, product quality and safety.‘‘ ‘‘

CA

PA

BIL

ITY

ST

AT

EM

EN

T |

20

15

7

Steel FabricationOur modern, purpose built workshop facilities with overhead cranes, automated beamline and tractor welding machines and experienced, qualified tradesmen ensure that the finished product is fabricated and manufactured accurately and on time.

Qualified and certified welders, welding procedures, full time QA staff and internal NDT testing are all part of our internal QA systems.

We have capacity for up to 1,800 person hours per week and 7,000t per year. Our 3000m² workshop contains the following equipment:

• 3 x 5t overhead cranes• 1 x 10t overhead crane• Beamline welding machine• Oxy cutting equipment• Plasma cutter• 115t punch and shear machine• 4t forklifts

Workshop Detailingidec’s workshop detailing arm specialises in producing steel workshop detail drawings for commercial and industrial buildings, the mining industry and for all types of steelwork. idec’s detailing section (idetail – idetail.co.nz) services not only idec but many other companies in Australia and abroad.

Utilising advanced 3D modelling software (Tekla Structures) and with in-house customisation abilities, we produce an intelligent Building Information Model (BIM).

Customised reports, assembly drawings, single part drawings and 3D erection drawings are all linked to the 3D model to ensure all documentation is integrated and accurate to assist with fabrication and erection.

Many types of electronic data can be provided to suit individual workshop requirements and steel suppliers. For example:

• Assembly drawings • Erection drawings• Single part drawings • CNC Data• DXF • BIM Modelling

Take advantage of our unique engineering design, drafting and on-site capabilities.

‘‘ ‘‘

I D E C S O L U T I O N S P T Y L T D

C A P A B I L I T Y S T A T E M E N T | 2 0 1 58

Protective Coatingsidec offers a complete corrosion protection service for all metallic items, whether large or small. Part of the idec group, idec protective coatings (idecprotectivecoatings.com.au), has extensive experience with the domestic, industrial, commercial, petroleum, gas, mining, energy and government sectors.

Our facility offers both grit and garnet blasting followed by the application of high build epoxies, two pack polyurethanes, catalysed acrylics, inorganic and epoxy zincs, single and two pack high build zinc phosphates, polysiloxane or enamel finishes.

In addition to the above we offer the arc hot zinc or aluminium metal spray process that is widely used in Europe, especially for marine purposes. This system offers ultra long-term protection.

With an excess of thirty highly trained personnel we offer excellent service and quality. Your project is monitored by our rigorous Q.A. procedures to ensure the work is of the highest quality, on time and within budget.

Hot dip galvanizing is also available at nearby locations.

Facilities and services include:

• 13,000m² site• 4,000m² blast and paint buildings• 3 x grit and garnet blast rooms• Hot metal zinc spray• 2 x 12t Franna yard cranes

CA

PA

BIL

ITY

ST

AT

EM

EN

T |

20

15

9I D E C S O L U T I O N S P T Y L T D

Design & Construct idec design and construct experience in the full development process has enabled us to be a market leader in warehouses, factories, distribution centres together with agricultural and mining building construction.

At idec we offer a turnkey approach to your project. With our in-house capabilities, including pre-construction, architectural design, engineering, fabrication, construction and project management along with our ongoing relationships with town planners and certifiers, ensure that we exceed our clients’ expectations from concept to completion.

Getting idec involved from the start ensures that your project doesn’t become entangled with extremely long lead times and cost blowouts throughout the design phase.

Our services include, but are not limited to:

• Architectural design• Engineering• Planning• Hydraulic, electrical and mechanical consultation• Council approvals• Private certification• Construction management

Design and construct examples:Chiorino Warehouse – Parkinson, QldAlmax Factory – Lytton, QldHempel Paints – Murarrie, QldPrestige Pets – Caboolture, QldVisy recycling warehouse – Stapylton, Qld

From concept to completion.‘‘

‘‘

C A P A B I L I T Y S T A T E M E N T | 2 0 1 510

from concept to completion

CA

PA

BIL

ITY

ST

AT

EM

EN

T |

20

15

11I D E C S O L U T I O N S P T Y L T D

from concept to completion

INDUSTRIAL

C A P A B I L I T Y S T A T E M E N T | 2 0 1 512

Specialising in custom engineered, steel framed industrial buildings and structures, idec can provide all or part of your complete building solution.

Our specialty is large buildings, whether wide clear span or very high building requirements. With our flexibility to meet your requirements we are able to design and construct your next industrial project with up to 65+m clear span.

Types of projects:

• Heavy industrial buildings• Workshops• Warehouses• Distribution centres• Crane beams• Building extensions• Mezzanine flooring• Sound proof buildings

Industrial examples:Zacpac Warehouse – Stapylton, QldTranscity TBM Building – Toowong, QldAirport Link Spoil Shed – Nudgee, QldMcAleese Transport – Mackay, QldSouth Road Superway Casting Yard Building – Adelaide, SA

CA

PA

BIL

ITY

ST

AT

EM

EN

T |

20

15

13I D E C S O L U T I O N S P T Y L T D

COMMERCIAL

Commercial buildings such as headquarters, showrooms, retail buildings and specialist warehouses are all part of idec’s design and construct expertise. Large clear span structures are a particular capability of idec where required. We are able to simply design and construct the steel work, or undertake the complete build including DA and BA.

We are able to provide the best solution for a set realistic budget or find the best economic solution to your specified criteria.

We are able to work with your architectural designs or start from scratch and through consultation, provide efficient yet interesting designs appropriate to your setting and needs. Commercial examples:Bunnings Warehouse – Palmerston, NTHomeworld – Gold Coast, QldBig W – Calamvale, QldHinterland Toyota – Gold Coast, QldIngham IGA – Ingham, Qld Bestlan Bananas – Townsville, QLD

Designing and constructing aesthetic and functional buildings.‘‘

‘‘

HEALTH & EDUCATION

C A P A B I L I T Y S T A T E M E N T | 2 0 1 514

idec has been engaged to fabricate and install steelwork in numerous hospitals including the Wesley, Prince Charles, Gold Coast University, Ipswich and Mackay Base hospitals. Most of the installations were required to be done whilst the hospitals were still functional.

For schools and university colleges idec has either completed fabrication and installation of steelwork, or design and construct of steelwork, or the complete building. Projects include lecture halls, sports halls, multi-purpose covers and classroom blocks.

idec is particularly adept at working with community groups such as school P&Cs in working through the requirements and budgets to reach the best outcome for the school.

Medical Examples:Wesley Hospital East Wing – Auchenflower, QldPrince Charles Hospital Facades – Chermside, QldGold Coast University Hospital Mental Health - Gold Coast, QldMackay Base Hospital Buildings K and L – Mackay, QldIpswich Hospital extension – Ipswich, Qld

Educational Examples:Rockhampton High School Cover – Rockhampton, QldKuraby State School MPH – Kuraby, QldCannon Hill Anglican College Sports Cover - Cannon Hill, QldArethusa College MPH - Deception Bay, QldSt Andrews College MPH - Peregian Springs, Qld

RECREATIONAL

CA

PA

BIL

ITY

ST

AT

EM

EN

T |

20

15

15I D E C S O L U T I O N S P T Y L T D

Protection from sun and weather and providing a year round sporting and recreational facility is high on the agenda of many sporting, community and educational groups.

idec has completed numerous sporting and recreational covers and enclosures including bowling green covers, multipurpose halls, swimming pool enclosures and an equestrian centre.

The curved clear span roof structure of the State Equestrian Centre at Caboolture was designed and constructed by idec. It was designed to conform to the architect’s design and has a clear span of 66m.

We have designed and built several bowling club covers. Apart from protecting the patrons from the elements, the additional benefits of an all-weather bowls green cover have become apparent with increased patronage to the clubs as well as increased community interest. Examples include Mt Gravatt Bowls Club in Brisbane, North Mackay and City Bowls in Mackay and the Urangan Bowls Club at Hervey Bay to name a few.

Many schools find building large multi-purpose halls to be advantageous to both themselves and their community. The Cannon Hill Anglican College required a cover that was to be in excess of 40m by 40m but only have 6 supporting columns. Utilising the tapered columns and rafters and smart engineering, idec produced an excellent result.

Recreational examples:PCYC Sports Stadium – Mackay, QldMt Gravatt Bowls Club Cover - Mt Gravatt, QldUrangan Bowls Club Cover – Urangan, QldRedlands College Sports Hall - Wellington Point, QldEquestrian Centre – Caboolture, Qld

…advantageous to yourself and the community.‘‘

‘‘

C A P A B I L I T Y S T A T E M E N T | 2 0 1 516

RESOURCE AND MININg

idec has a long history of expertise in the mining, oil and gas industries.

Recently constructed projects for the mining industry include steel framed buildings for Yarrabee, Kestral, Lake Vermont and Caval Ridge Mines.

idec is also active in oil and gas resource industries with the recent construction of camp buildings at the downstream end on Curtis Island for all three of the LNG producers, namely APLNG, GLNG and QCLNG.

The success of these projects carried idec forward to additional LNG work. For example, 900t of structural steel pipe racks, supports and crossovers have been fabricated and installed by idec outside the Roma area, large compressor buildings and other assorted steel work.

Mining examples:Minerva Mine Workshop, QldOk Tedi Mine Workshop – Ok Tedi, PNGLake Vermont Mine Workshop, QldYarrabee Mine Workshop, QldBechtel Storage Shed – Boyne Island, Qld

Resource examples:Spring Gully Gas Plant Workshop, QldYarwun compressor covers, QldGLNG pipe supports and platforms – Roma, QldAPLNG compressor covers – Talinga. Qld

CA

PA

BIL

ITY

ST

AT

EM

EN

T |

20

15

17I D E C S O L U T I O N S P T Y L T D

SPECIALISED FABRICATION

For your high end fabrication needs, idec is the perfect choice for the fabrication of items such as:

• Pipe stands, crossovers and platforms

• Chutes

• Skids

• Crane beams

• Intricate stair frames

• Communications and electrical generation module frames

• Any structure that require welding to AS/NZS 1554.1:2011.

We have highly qualified fabricators and welders together with a full time team of QA personnel.

I D E C S O L U T I O N S P T Y L T D

C A P A B I L I T Y S T A T E M E N T | 2 0 1 518

VERTICAL INFRASTRUCTUREidec provides turnkey vertical infrastructure solutions. We have the experience, specialised equipment, training and systems to undertake work in any location around Australia, specialising in remote and complex sites.

idec has considerable experience working with Air Services Australia (ASA) to fabricate and install communications towers in remote locations throughout Australia. With an outstanding workplace health and safety system and an excellent quality assurance program, idec has established a peerless reputation in this specialist field.

idec provides any or all of the following:

• Engineering design, drafting & certification• Project management• Foundation construction and civil works• Tower fabrication and procurement• Monopole procurement• Structure assembly and erection• Technical rigging for the aviation and communication sectors• Equipment installation and mounting systems• Services installation• Site works and fencing• Remote and urban sites

Vertical infrastructure (tower) examples:Bagot, NTLaunceston, TASHorn Island, QLDMt Isa, QLDCecil Park, NSW

Whether it is a remote site or a city airport, we have the expertise to engineer, fabricate and install your tower.‘‘ ‘‘

CA

PA

BIL

ITY

ST

AT

EM

EN

T |

20

15

19I D E C S O L U T I O N S P T Y L T D

REMOTE CIVIL INFRASTRUCTURE

idec specialises in design and construct civil works at remote sites. We possess the skills, experience, expertise, as well as excellent quality and safety systems to undertake your project, whether basic or challenging.

Examples include numerous communication and air navigation tower foundations, slabs and site works.

idec is able to provide the following works:

• Civil design and certification• Surveying and site set out• Excavation and earthmoving• Road works and car parks• Drainage and storm water• Civil infrastructure• Construction site preparation• Foundations and services• Site works and fencing

Ph. +61 7 3908 9600Fax. +61 7 3908 9699

58 Anton Rd, Hemmant, QLD 4174PO Box 100, Cannon Hill, QLD 4170

i d e c . c o m . a u

j a z - a n z . o r g / r e g i s t e r